LG Manual TV

8/8/2019 LG Manual TV

1/112

Please read this manual carefully before operatingyour set.Retain it for future reference.

Record model number and serial number of the set.

See the label attached on the back cover and quote

this information to your dealer

when you require service.

LCD TV PLASMA TVOWNERS MANUALLCD TV MODELS

32LC7D

32LC7DC

37LC7D

42LC7D

PLASMA TV MODELS

42PC5D

42PC5DC

50PC5D

50PC5DC

www.lgusa.com / www.lg.ca / www.lgcommercial.com

As an ENERGY STARPartner LGE U. S. A.,Inc.has determined that thisproduct meets theENERGY STAR guidelinesfor energy efficiency.

ENERGY STAR is a set of power-savingguidelines issued by the U.S.Environmental Protection Agency(EPA).


2/112


3/112

1

WARNING / CAUTION

WARNING / CAUTION

To prevent fire or shock hazards, do not exposethis product to rain or moisture.

FCC NOTICE

Class B digital device

This equipment has been tested and found to complywith the limits for a Class B digital device, pursuant toPart 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmfulinterference in a residential installation. This equipment

generates, uses and can radiate radio frequency energyand, if not installed and used in accordance with theinstructions, may cause harmful interference to radiocommunications. However, there is no guarantee thatinterference will not occur in a particular installation.If this equipment does cause harmful interference toradio or television reception, which can be determinedby turning the equipment off and on, the user isencouraged to try to correct the interference by oneor more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment andreceiver.

- Connect the equipment to an outlet on a circuitdifferent from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TVtechnician for help.

Any changes or modifications not expressly approvedby the party responsible for compliance could voidthe users authority to operate the equipment.

CAUTION

Do not attempt to modify this product in any waywithout written authorization from LG Electronics.Unauthorized modification could void the usersauthority to operate this product

The lightning flash with arrowheadsymbol, within an equilateral triangle, isintended to alert the user to the presence

of uninsulated dangerous voltage within theproducts enclosure that may be of sufficientmagnitude to constitute a risk of electric shock topersons.

The exclamation point within an equilateraltriangle is intended to alert the user to

the presence of important operating andmaintenance (servicing) instructions in the litera-ture accompanying the appliance.

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK). NOUSER SERVICEABLE PARTS INSIDE. REFER TO

QUALIFIED SERVICE PERSONNEL.

WARNING/CAUTION

TO REDUCE THE RISK OF FIRE AND ELECTRICSHOCK, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV systeminstallers attention to Article 820-40 of the NationalElectric Code (U.S.A.). The code provides guidelines forproper grounding and, in particular, specifies that thecable ground shall be connected to the grounding systemof the building, as close to the point of the cable entryas practical.


4/112

2

IMPORTANT SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

Important safety instructions shall be provided with each apparatus. This information shall be given in a separate

booklet or sheet, or be located before any operating instructions in an instruction for installation for use andsupplied with the apparatus.

This information shall be given in a language acceptable to the country where the apparatus is intended to be used.

The important safety instructions shall be entitled Important Safety Instructions. The following safetyinstructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety

information may be included by adding statements after the end of the following safety instruction list. At themanufacturers option, a picture or drawing that illustrates the intent of a specific safety instruction may be

placed immediately adjacent to that safety instruction:

Read these instructions.

Keep these instructions.

Heed all warnings.Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install inaccordance with the manufacturers instructions.

Do not install near any heat sources such asradiators, heat registers, stoves, or other apparatus(including amplifiers)that produce heat.

Do not defeat the safety purpose of the polarizedor grounding-type plug. A polarized plug hastwo blades with one wider than the other. Agrounding type plug has two blades and a thirdgrounding prong, The wide blade or the thirdprong are provided for your safety. If the providedplug does not fit into your outlet, consult anelectrician for replacement of the obsolete outlet.

Protect the power cord from being walked onor pinched particularly at plugs, conveniencereceptacles, and the point where they exit fromthe apparatus.

Only use attachments/accessories specified bythe manufacturer.

Unplug this apparatus when unused for longperiods of time.

1

2

3

4

5

6

7

8


5/112

3

Use only with the cart, stand, tripod, bracket,or table specified by the manufacturer, or soldwith the apparatus. When a cart is used, usecaution when moving the cart/apparatus

combination to avoid injury from tip-over.

Never touch this apparatus or antenna duringa thunder or lighting storm.

Do not allow a impact shock or any objects tofall into the product, and do not drop onto thescreen with something.

Refer all servicing to qualified service personnel.Servicing is required when the apparatus hasbeen damaged in any way, such as power-supplycord or plug is damaged, liquid has beenspilled or objects have fallen into the apparatus,the apparatus has exposed to rain or moisture,does not operate normally, or has been

dropped.

CAUTION concerning the Power Cord :Most appliances recommend they be placedupon a dedicated circuit; that is, a single outletcircuit which powers only that appliance andhas no additional outlets or branch circuits.Check the specification page of this owner'smanual to be certain.

Do not overload wall outlets. Overloaded walloutlets, loose or damaged wall outlets, extensioncords, frayed power cords, or damaged orcracked wire insulation are dangerous. Any ofthese conditions could result in electric shockor fire. Periodically examine the cord of yourappliance, and if its appearance indicates dam-age or deterioration, unplug it, discontinue use

of the appliance, and have the cord replacedwith an exact replacement part by an authorizedservicer. Protect the power cord from physicalor mechanical abuse, such as being twisted,

kinked, pinched, closed in a door, or walkedupon. Pay particular attention to plugs, walloutlets, and the point where the cord exits theappliance.

Outdoor use marking :

WARNING - To reduce the risk of fire or elec-tric shock, do not expose this appliance to rainor moisture.

Wet Location Marking : Apparatus shall not beexposed to dripping or splashing and noobjects filled with liquids, such as vases, shallbe placed on or over apparatus.

GROUNDING

Ensure that you connect the earth ground wireto prevent possible electric shock. If groundingmethods are not possible, have a qualifiedelectrician install a separate circuit breaker.

Do not try to ground the unit by connecting it

to telephone wires, lightening rods, or gas pipes.

DISCONNECTING DEVICE FROM MAINS

Mains plug is the disconnecting device. Theplug must remain readily operable.

9

12

10

11

13

14

15

16

17

PowerSupply

Short-circuitBreaker


6/112

4

CONTENTS

WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2

FEATURE OF THIS TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

PREPARATION

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Back Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Stand Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

VESA Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Back Cover for Wire Arrangement . . . . . . . . . . . . . . . . . . . . . 14Attaching the TV to a Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Antenna or Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 17

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Other A/V Source Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

25PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Audio Out Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

WATCHING TV / CHANNEL CONTROL

Remote Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Turning On TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

On-Screen Menus Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Channel Setup

- Auto Scan (Auto Tuning) . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

- Add / Delete Channel (Manual Tuning) . . . . . . 37

- Channel Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Input List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

SimpLink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

PICTURE CONTROL

Picture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . . 44

Preset Picture Settings

- Picture Mode - Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

- Color Tone - Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Manual Picture Adjustment

- Picture Mode - User Mode . . . . . . . . . . . . . . . . . . . . . . . . 47

- Color Tone - User Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

XD - Picture Improvement Technology . . . . . . . . . . . . . 49

Advanced - Cinema 3:2 Pulldown Mode . . . . . . . . . . . 50

Advanced - Black (Darkness) Level . . . . . . . . . . . . . . . . . . . 51

Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Image Sticking Minimization (ISM) Method . . . . . . . 53

Low - Power Picture Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

SOUND & LANGUAGE CONTROL

Auto Volume Leveller (Auto Volume) . . . . . . . . . . . . . . . . . 55

Preset Sound Settings (Sound Mode) . . . . . . . . . . . . . . 56

Sound Setting Adjustment - User Mode . . . . . . . . . . . 57

Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

TV Speakers On/Off Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Stereo/SAP Broadcasts Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

On-Screen Menus Language Selection . . . . . . . . . . . . . . 62

Caption Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

- Analog Broadcasting System Captions . . . . . . . 64

- Digital Broadcasting System Captions . . . . . . . . 65

- Caption Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66


7/112

5

TIME SETTING

Clock Setting

- Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

- Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Auto On/Off Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Auto Shut-off Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

PARENTAL CONTROL / RATINGS

Set Password & Lock System . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Channel Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

External Input Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74Movie & TV Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

APPENDIX

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Programming the Remote Control . . . . . . . . . . . . . . . . . . . 83

IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

External Control Through RS-232C . . . . . . . . . . . . . . . . . .89

Open Source License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96


8/112

6

FEATURE OF THIS TV

LG's own special digital image generator, consistingof a full digital image processor, six different mainpicture quality factors.

High-definition television. High-resolution digitaltelevision broadcast and playback system composedof roughly a million or more pixels, 16:9 aspect-ratioscreens, and AC3 digital audio. A subset of digitaltelevision, HDTV formats include 1080i and 720presolutions.

With HDMI CEC support of LGs audio/video deviceconnected to the HDMI (high-definition multimediainterface), LG TV with this logo works easily with oneremote control.

Manufactured under license from Dolby Laboratories.Dolbyand the double-D symbol are trademarks ofDolby Laboratories.

is a trademark of SRS Labs, Inc.TruSurround XT technology is incorporated underlicense from SRS Labs, Inc.

It has 2 HDMI ports that connect audio and videodevices with one cable and produces the highestquality digital images and sound.

FOR LCD TV

I If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal, there isnothing wrong with TV.

I Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However,they have no adverse effect on the monitor's performance.

I Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may producesome temporary distortion effects on the screen.

On Disposal

a. The fluorescent lamp used in this product contains a small amount of mercury.

b. Do not dispose of this product with general household waste.

c. Disposal of this product must be carried out in accordance to the regulations of your local authority.


9/112

PREPARATION

7

PREPARATION

ACCESSORIESEnsure that the following accessories are included with your product. If an accessory is missing, please contact

the dealer where you purchased the product.

User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standardcompliance for the product.

The accessories can be different from the figures shown here.

75ohm Round Cable

Option Extras

D-sub 15 pin Cable

For LCD TV models

2-Eye-bolts(Refer to p.16)

2-Wall brackets(Refer to p.16)

For Plasma TV models

CableManagement 4-Bolts for stand assembly

(Refer to p.12)

32/37 inches only

* Slightly wipe stained spot on the exterior only with the polishing

cloth for the product exterior if there is stain or fingerprint on

surface of the exterior.

* Do not wipe roughly when removing stain. Please be cautions of

that excessive pressure may cause scratch or discoloration.Polishing Cloth

1.5V 1.5V

Owners Manual CD Manual

1

2

3

4

5

6

7

8

0 9BACK

VOL

CH

MUTE

FAV

BRIGHT-MENU

BRIGHT+ENTER

EXIT

TIMER

RATIOSIMPLINK

POWER

VCR

TV

DVDAUDIO

CABLE

STB

MODE

TVINPUT

INPUT

I

T+

TII LI K

1

4

7

Remote Control,Batteries

Power Cord

Copyright2007LGE,AllRightsReserved.

2- TV Bracket Bolts(Refer to p.16)

2- TV Brackets,2- Wall Brackets(Refer to p.16)

Twist HolderArrange the wires with

the twist holder.

This feature is not available for all models

This feature is not available for all models


10/112

PREPARATION

8

FRONT PANEL INFORMATION

PREPARATION

I Here shown may be somewhat different from your TV.

I NOTE: If your product has a protection tape attached, remove the tape.And then wipe the product with a cloth (If a polishing cloth is included with your product, use it).

Plasma TV Model

CHOLENUNPUT ENTER

POWERButton

INPUTButton

MENUButton

ENTERButton

VOLUME(F,G)Buttons

CHANNEL(E,D)Buttons

CHOLENUNPUT ENTER

Power/Standby IndicatorIlluminates red in standby mode.Illuminates green when the set is switched on.

Remote Control Sensor


11/112


12/112

PREPARATION

10

BACK PANEL INFORMATION

PREPARATION

Plasma TV Model


LCD TV Model

R

RGB IN

COMPONENT IN

AUDIO(RGB/DVI)

RGB(PC) REMOTECONTROL IN

1

2

RS-232C IN

(CONTROL & SERVICE)

VIDEO AUDIO VIDEO

AUDIO OUT

MONO ) AUDIOS-VIDEO

AV

IN1

SERVICE

ANTENNA/

CABLE IN

OPTICAL

DIGITAL AUDIO OUT

HDMI IN

HDMI/DVI IN

1

2

AV IN 2

L/MONO

R

AUDIO

VIDEO

S-VIDEO

( )

10

11

AV IN 2

L/MONO

R

AUDIO

VIDEO

S-VIDEO

( )

1

3 5

4

8

6

7

9

2

10

R

RGB IN

HDMI IN

HDMI/DVI IN

COMPONENT IN

AUDIO(RGB/DVI)

RGB(PC) REMOTECONTROL IN

ANTENNA/CABLE IN

1 1

22

RS-232C IN

(CONTROL & SERVICE)

VIDEO AUDIO VIDEO

AUDIO OUT

OPTICAL

MONO ) AUDIOS-VIDEO

DIGITALAUDIO OUT

AV

IN1

SERVICE

13

5

4

6

7

9

2

10

8

10

11


13/112

PREPARATION

11

HDMI/DVI IN 1, HDMI IN 2

Connect a HDMI (DVI) connection to either input.

COMPONENT INConnect a component video/audio device to thesejacks.

RGB (PC)

Connect the output from a PC.AUDIO (RGB/DVI)

Connect the audio from a PC or DTV.

SERVICE

Remote Control Port

Connect a wired remote control.

ANTENNA/CABLE INConnect over-the air signals to this jack.Connect cable signals to this jack.

DIGITAL AUDIO OUTConnect digital audio from various types of equipment.Note: In standby mode, these ports do not work.

RS-232C IN (CONTROL & SERVICE) PORT

For external control devices.

AUDIO OUTConnect analog audio to various types of equipment.

AV (Audio/Video) IN

Connect audio/video output from an external

device to these jacks.S-VIDEOConnect S-Video out from an S-VIDEO device.

Power Cord SocketFor operation with AC power.Caution: Never attempt to operate the TV on DCpower.

1

11

2

3

4

5

6

8

7

9

10


14/112

PREPARATION

12

PREPARATION

STAND INSTALLATION (Only 32/37 inches LCD TV models)

Carefully place the product screen side down ona cushioned surface that will protect product andscreen from damage.

Assemble the product stand with the product asshown.

Securely install the 4 bolts provided.

1

2

3



15/112

PREPARATION

13

VESA WALL MOUNTINGThis product accepts a VESA-compliant mounting interface pad. (optional)

There 4 threaded holes are available for attaching the bracket.

G Screw length needed depends on the wall mount used. For further information, refer to the VESAWall Mounting Instruction Guide.

NOTE!

R

(

600 mm

400 mmR

(

600 mm(32 inches only: 200 mm)

400 mm(32 inches only: 100 mm)

Plasma TV Model LCD TV Model

For proper ventilation, allow a clearance of 4 inches on all four sides from the wall.

G Ensure adequate ventilation by following the clearance recommendations.CAUTION

DESKTOP PEDESTAL INSTALLATION

4 inches4 inches 4 inches4 inches

4 inches

4 inches 4 inches


4 inches


16/112

PREPARATION

14

BACK COVER FOR WIRE ARRANGEMENT

PREPARATION

Hold the CABLE MANAGEMENT with both hands and pull it backward as shown.

Connect the cables as necessary.

To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section.

1

2

Install the CABLE MANAGEMENT as shown.3


CABLE MANAGEMENT

Plasma TV Model


17/112

PREPARATION

15

LCD TV Model

Connect the cables as necessary.

To connect an additional equipment, see theEXTERNAL EQUIPMENT SETUP section.

Install the CABLE MANAGEMENT as shown.

How to remove the CABLE MANAGEMENT

G Hold the CABLE MANAGEMENT with both hands andpull it backward.

CABLE MANAGEMENT

TWIST HOLDERG Do not hold the CABLE MANAGEMENT when moving

the product.

- If the product is dropped, you may be injured or the

product may be broken.

NOTE!

1

2

Bundle the cables using the supplied TWISTER HOLDER.(This feature is not available for all models.)3


18/112

PREPARATION

16

ATTACHING THE TV TO A WALL

PREPARATION

We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,potentially causing injury or damaging the product.Caution: Please make sure that children dont climb on or hang from the TV.


I Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.

*If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.

Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) tothe wall. Match the height of the bracket that is mounted on the wall to the holes in the product.

Ensure the eye-bolts or brackets are tightened securely.

I Use a sturdy rope (not provided as parts of the product, must pur-chase separately) to tie the product. It is safer to tie the rope so itbecomes horizontal between the wall and the product.

I This feature is not available for all models.I

Here shown may be somewhat different from your TV.


19/112

PREPARATION

17

ANTENNA OR CABLE CONNECTION

1. Antenna (Analog or Digital)

Wall Antenna Socket or Outdoor Antenna without a Cable Box

Connections.

For optimum picture quality, adjust antenna direction if needed.

2. Cable

Wall

Antenna

Socket

Outdoor

Antenna

(VHF, UHF)

Cable TVWall Jack

Multi-family Dwellings/Apartments(Connect to wall antenna socket)

RF Coaxial Wire (75 ohm)

RF Coaxial Wire (75 ohm)

Single-family Dwellings /Houses(Connect to wall jack for outdoor antenna)

Be careful not to bend the bronze wirewhen connecting the antenna.

Copper Wire

G The TV will let you know when the analog, cable, and digital channel scans are complete.NOTE!

I To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.I If the antenna needs to be split for two TVs, install a 2-Way Signal Splitter.I If the antenna is not installed properly, contact your dealer for assistance.

Antenna

UHF

Signal

AmplifierVHF

R

ANTENNA/CABLE IN

( )

R

ANTENNA/CABLE IN

( )

R

ANTENNA/CABLE IN

( )


R

(

R

(


20/112

EXTERNALEQUIPMENTSETUP

18


HD RECEIVER SETUPThis TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you doreceive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.

When connecting Component cable

1. How to connect

Connect the video outputs (Y, PB, PR) of the digital set

top box to the COMPONENT IN VIDEO 1jacks onthe set. Match the jack colors (Y = green, PB = blue, andPR = red).

Connect the audio output of the digital set-top box to

the COMPONENT IN AUDIO 1jacks on the set.2

1

2. How to useI Turn on the digital set-top box.

(Refer to the owners manual for the digital set-top box. operation)

I Select C ompone nt 1 input source by using the INPUT

button on the remote control.

I If connected to COMPONENT IN2 input, selectComponent 2 input source.

I To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

I This part of EXTERNAL EQUIPMENT SETUP mainly use picture for LCD TV model.

RGB IN

I IN

/DVI IN

AUDIO(RGB/DVI)

RGB(PC) RECON

RS

(CONTR

S-V

COMPONENT IN

1

2

VIDEO AUDIO

Y L RPB PR

( )

SERVICE

1 2

Y, CB/PB, CR/PR

Horizontal VerticalFrequency(KHz) Frequency(Hz)

15.73 59.9415.73 60.00

31.47 59.9431.50 60.00

44.96 59.9445.00 60.00

33.72 59.9433.75 60.00

26.97 23.97627.00 24.0033.71 29.9733.75 30.0067.432 59.94

67.50 60.00

Resolution

720x480i

720x480p

1280x720p

1920x1080i

1920x1080p

Signal

480i

480p

720p

1080i

1080p

Component 1/2

Yes

Yes

Yes

Yes

Yes

HDMI1/2

No

Yes

Yes

Yes

Yes


21/112


19

( )

RGB IN

COMPONENT I

AUDI(RGB/D

RGB(PC)

1

2

VIDEO

HDMI IN

HDMI/DVI IN

1

2

HDMI-DTV OUTPUT

( )

When connecting HDMI cable

Connect the digital set-top box to HDMI/DVI IN 1

orHDMI IN 2 jack on the set.

No separated audio connection is necessary.

HDMI supports both audio and video.

1. How to connect

2. How to useI Turn on the digital set-top box.

(Refer to the owners manual for the digital set-top box.)

I Select HDMI1 or HDMI2 input source by using theINPUT button on the remote control.

2

1

1

HDMI1/DVI-DTV, HDMI2-DTV mode

Horizontal VerticalFrequency(KHz) Frequency(Hz)

31.47 59.9431.50 60.00

44.96 59.9445.00 60.00

33.72 59.9433.75 60.00

26.97 23.97627.00 24.0033.71 29.9733.75 30.0067.432 59.93967.50 60.00

Resolution

720x480p

1280x720p

1920x1080i

1920x1080p


22/112


20


When connecting HDMI to DVI cable

COMPONENT IN

AV

IN1

ANTENNA/CABLE IN

1

2

RS-232C IN

(CONTROL & SERVICE)

VIDEO AUDIO

AUDIO OUT

VIDEO MONO ) AUDIOS-VIDEO

HDMI IN

HDMI/DVI IN

1

2

RGB IN

AUDIO(RGB/DVI)

L RDVI-DTV OUTPUT

RGB(PC) REMOTECONTROL INSERVICE

DIGITALAUDIO OUT

OPTICAL

Connect the DVI output of the digital set-top box to the HDMI/DVI IN 1 jack on the set.

Connect the audio output of the digital set-top box to the AUDIO (RGB/DVI) jack on the set.

1. How to connect

I Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.)

I Select HDMI1 input source by using the INPUT button on the remote control.

2. How to use

2

1

12


23/112


21

DVD SETUP

When connecting Component cable

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV Y PB PR

Video output ports

on DVD player

Y

Y

Y

Y

PB

B-Y

Cb

Pb

PR

R-Y

Cr

Pr

Connect the video outputs (Y, PB, PR) of the DVD to theCOMPONENT IN VIDEO1jacks on the set.

Match the jack colors

(Y = green, PB = blue, and PR = red).

Connect the audio outputs of the DVD to the

COMPONENT IN AUDIO1jacks on the set.

1. How to connect

2. How to use

I Turn on the DVD player, insert a DVD.

I Select Component 1 input source by using the INPUT

button on the remote control.

I If connected to COMPONENT IN 2 input, selectComponent 2 input source.

I Refer to the DVD player's manual for operating instructions.

2

1RGB IN

AUDIO(RGB/DVI)

RGB(PC) RECONT

RS

(CONTR

( S-VI

COMPONENT IN

1

2

VIDEO AUDIO

Y L RPB PR

SERVICEN

I IN

1 2


24/112


22


When connecting with an S-Video cable

Connect the S-VIDEO output of the DVD to theS-VIDEO input on the set.

Connect the audio outputs of the DVD to the AUDIO

input jacks on the set.

1. How to connect

2. How to use

I Turn on the DVD player, insert a DVD.

I Select AV1 input source by using the INPUT button on the

remote control.

I If connected to AV IN2, select AV2 input source.


When connecting HDMI cable

Connect the HDMI output of the DVD to theHDMI/DVI IN 1 orHDMI IN 2jack on the set.

No separated audio connection is necessary.

HDMI supports both audio and video.

1. How to connect

2. How to use

I

Select HDMI1 orHDMI2 input source by using theINPUT button on the remote control.


2

1

2

1

N

IODVI)

ANTENNA/CABLE IN

RS-232C IN

(CONTROL & SERVICE)

AUDIO

AUDIO OUT

MONO ) AUDIOS-VIDEO AV

IN1

VIDEO

REMOTECONTROL INSERVICE

DIGITALAUDIO OUT

OPTICAL

L RS-VIDEO

AUDIO

1 2

( )

RGB IN

COMPONENT IN

AUDIO(RGB/DVI

RGB(PC)

1

2

VIDEO

HDMI IN

HDMI/DVI IN

1

2

HDMI-DVD OUTPUT

1


25/112


23

VCR SETUP

When connecting with an antenna

I To avoid picture noise (interference), leave an adequate distance between the VCR and TV.

I Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long peri-

od of time (Only Plasma TV model). If the 4:3 picture format is used; the fixed images on the sides of thescreen may remain visible on the screen. This phenomenon is common to all manufactures and in conse-

quence the manufactures warranty does not cover the product bearing this phenomenon.

Connect the RF antenna out socket of the VCR to the ANTENNA/CABLE IN socket on the set.

Connect the antenna cable to the RF antenna in socket of the VCR.

1. How to connect

I Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

I Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.)

2. How to use

2

1

L RS-VIDEO VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

GB IN

MPONENT IN

AV

IN1

AUDIO(RGB/DVI)

ANTENNA/CABLE IN

RS-232C IN

(CONTROL & SERVICE)

EO AUDIO

AUDIO OUT


( )

( )


DIGITALAUDIO OUT

OPTICAL

Wall Jack

Antenna

1

2


26/112


24


G Do not connect to both Videoand S-Video at the same time. Inthe event that you connect bothVideo and the S-Video cables,only the S-Video will work.

CAUTION

When connecting with a RCA cable

G The picture quality is improved: compared to normalcomposite (RCA cable) input.

NOTE!

Connect the AUDIO/VIDEO jacks between TV andVCR. Match the jack colors (Video = yellow, Audio Left= white, and Audio Right = red)

1. How to connect

2. How to use

I Insert a video tape into the VCR and press PLAY on theVCR. (Refer to the VCR owners manual.)

I Select AV1 input source by using the INPUT button on

the remote control.


When connecting with an S-Video cable

Connect the S-VIDEO output of the VCR to theS-VIDEO input on the set.

Connect the audio outputs of the VCR to the AUDIO

input jacks on the set.

1. How to connect

2. How to use

I Insert a video tape into the VCR and press PLAY on the VCR.

(Refer to the VCR owners manual.)

I Select AV1 input source by using the INPUT button on theremote control.


1

2

1

G If you have a mono VCR, connect the audio cable from the VCR to the AUDIOL/MONOjack of the set.

NOTE!

T IN

DIOB/DVI)

ANTENNA/CABLE IN

RS-232C IN

(CONTROL & SERVICE)

AUDIO

AUDIO OUT

( )

AVIN1



DIGITALAUDIO OUT

OPTICAL

L RS-VIDEO VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

1

( )

( )

IN

DIOB/DVI)

ANTENNA/CABLE IN

RS-232C IN

(CONTROL & SERVICE)

AUDIO

AUDIO OUT

AV

IN1



DIGITALAUDIO OUT

OPTICAL

L RS-VIDEO VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

1 2


27/112


25

OTHER A/V SOURCE SETUP

AV IN 2

L/MONO

R

AUDIO

VIDEO

S-VIDEO

L RVIDEO

Camcorder

Video Game Set

Connect the AUDIO/VIDEO jacksbetween TV and external equipment.Match the jack colors.

(Video = yellow, Audio Left = white, andAudio Right = red)

1. How to connect

2. How to use

I Select AV2 input source by using the INPUTbutton on the remote control.

I If connected to AV IN1 input, select AV1input source.

I Operate the corresponding external equipment.

1

1


28/112


26

PC SETUP


This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.

When connecting D-sub 15 pin cable

Connect the RGB output of the PC to the RGB (P C)

jack on the set.

Connect the PC audio output to the AUDIO (RGB/DVI)jack on the set.

1. How to connect

2. How to use

I Turn on the PC and the TV.

I Select RGB-PC input source by using the INPUT button

on the remote control.

2

1COMPONENT IN

1

2

(CO

VIDEO AUDIO

RGB IN

AUDIO(RGB/DVI)

RGB(PC)

RGB OUTPUT AUDIO

CSERVICEI IN

I/DVI IN

1 2


29/112


27

When connecting HDMI to DVI cable

Connect the DVI output of the PC to the HDMI/DVI IN 1 jack on the set.

Connect the PC audio output to the AUDIO (RGB/DVI) jack on the set.

1. How to connect

2. How to use

I Turn on the PC and the TV.

I Select HDMI1 input source by using the INPUT button on the remote control.

2

1

COMPONENT IN

AV

IN1

1

2

RS-232C IN

(CONTROL & SERVICE)

VIDEO AUDIO

AUDIO OUT


HDMI IN

HDMI/DVI IN

1

2

RGB IN

AUDIO(RGB/DVI)

DVI-PC OUTPUT

RGB(PC)

AUDIO


DIGITALAUDIO OUT

OPTICAL

1

2


30/112


31/112


32/112


33/112


31

AUDIO OUT SETUP

Send the TVs audio to external audio equipment via the Audio Output port.

AV

IN1

I)

ANTENNA/CABLE IN

RS-232C IN

(CONTROL & SERVICE)

AUDIO

AUDIO OUT



DIGITALAUDIO OUT

OPTICAL

1

2

AV

IN1

RS-232C IN

(CONTROL & SERVICE)

AUDIO OUT


CONTROL INICE OPTICAL

L R S-VIDEOVIDEO

1

Connect audio outputs to the TVs AUDIO OUTjacks.

Set the TV Speaker option - Off in the AUDIO menu. (G p.59).See the external audio equipment instruction manual foroperation.

1. How to connect

2

1

Analog

G When connecting with external audio equipments, such as ampli-fiers or speakers, please turn the TV speakers off. (G p.59)

NOTE!

G Do not look into the optical output port. Looking at thelaser beam may damage your vision.

G Block the SPDIF out (optical) about the contents withACP(Audio Copy Protection) function.

CAUTION

Connect one end of the optical cable to the TVs DIGITALAUDIO OUT OPTICAL.

Connect the other end of the optical cable to the digitalaudio input on the audio equipment.

Set the TV Speaker option - Off in the AUDIO menu. (G p.59).See the external audio equipment instruction manual foroperation.

1. How to connect

2

3

1

Digital


34/112

WATCHIN

GTV/CHANNELCONTROL

32

REMOTE CONTROL FUNCTIONS


When using the remote control, aim it at the remote control sensor on the TV.

1 2 3

4 5 6

7 8

0

9

BACK

VOL CHMUTE FAV

BRIGHT-

MENU BRIGHT+

ENTER

EXITTIMER RATIO

SIMPLINK

POWER

VCRTVDVD

AUDIOCABLE

STB

MODE

TV INPUT INPUT

MODE

MENU

BRIGHT -/ +

THUMBSTICK(Up/Down/Left

Right/ENTER)

EXIT

TIMER

RATIO

SIMPLINK

VOLUME UP/DOWN

MUTE

FAV

CHANNELUP/DOWN

(DASH)

BACK

Select the remotes operating mode. TV, DVD, VCR,AUDIO, CABLE, or STB.

Control video cassette recorders or DVD players.

Displays the main menu.

Adjust the brightness on screen.

Navigate the on-screen menus and adjust the system set-tings to your preference.

Clear all on-screen displays and return to TV viewingfrom any menu.

Select the amount of time before your TV turns off auto-matically. G p.70

Change the aspect ratio. G p.44

See a list of AV devices connected to TV. When you tog-gle this button, the SimpLink menu appears at the screen.G p.41

Increase/decrease the sound level.

Switch the sound on or off. G p.34

Scroll through the programmed Favorite channels. G p.38

Select available channels.

Used to enter a program number for multiple programchannels such as 2-1, 2-2, etc.

Tune to the last channel viewed.

VCR/DVDcontrol buttons

NUMBER button


35/112

WATCHIN

GTV/CHANNELCONTROL

33

ADJUST

SAPSOUNDPICTURE CC

1 2 3

4 5 6

7 8

0

9

BACK

POWER

TV INPUT

INPUT

Turns your TV or any other programmed equipment on or off, depending on the mode.

In AV 1-2, Component 1-2, RGB-PC, HDMI1, and HDMI2 input sources, screen returns to thelast TV channel.

External input modes rotate in regular sequence: Antenna, Cable, AV1-2, Component 1-2, RGB-PC, HDMI1, and HDMI2.

(AV 1-2, Component 1-2, RGB-PC, HDMI1, and HDMI2 input sources are linked automatically,only if a device is connected.)

PICTURE

SOUND

SAP

CC

ADJUST

Selects the factory preset picture depend onthe viewing environment. G p.45

Selects the factory preset sound for type ofprogram. G p.56

Analog mode: Selects MTS sound (Mono,Stereo, or a SAP) G p.60

DTV mode: Changes the audio language.

Select a closed caption. G p.63

Adjust the screen resolution, position, size andphase. G p.29-30

Inside the Sliding Cover

IOpen the battery compartment cover on the backside and install the batteries matching correctpolarity (+ with +, - with -).

I Install two 1.5V AA batteries. Dont mix old orused batteries with new ones.

IClose cover.

IUse a remote control up to 7 meters distanceand 30 degree (left/right) within the receivingunit scope.

IDispose of used batteries in a recycle bin topreserve environment.

BRIGHT

- MENU BRIGHT+

POWER

VCRTVDVD

AUDIOCABLE STB

MODE

TVINPUT INPUT

BRIGHT-

MENU BRIGHT+

POWER

VCRTVDVD

AUDIOCABLE STB

MODE

TVINPUT INPUT

Installing Batteries Remote control effective range


36/112

WATCHIN

GTV/CHANNELCONTROL

34

TURNING ON TV


NOTE!

G If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

First, connect power cord correctly.At this moment, the TV switches to standby mode.

I In standby mode to turn TV on, press the , INPUT, CH (D orE)button on the TV or press the POWER, INPUT, TV INPUT, CH(D or

E), Number (0~9) button on the remote control.

Select the viewing source by using the TV INPUT, INPUT button on theremote control.

I This TV is programmed to remember which power state it was last set to,even if the power cord is out.

When finished using the TV, press the POWER button on the remote con-trol. The TV reverts to standby mode.

POWER

DVD

TV INPUT INPUT

SAPSOUNDPICTURE CC

1 2 3

4 5 6

7 8

0

9

BACK

VOL CHMUTE FAV

1

2

3

1 2 3

4 5 6

7 8

0

9

BACK

VOL CHMUTE FAV

EXIT TIMER RATIO SIMP

LINK

Press the CH (D orE) orNUMBER buttons to select a channel number.1

VOLUME ADJUSTMENT

CHANNEL SELECTION

Press the VOL (D orE) button to adjust the volume.

If you want to switch the sound off, press the MUTE button.

You can cancel the Mute function by pressing the MUTE orVOL(D orE)button.

1 2 3

4 5 6

VOL CHMUTE FAV

EXITTIMER RATIO

SIMPLINK

Adjust the volume to suit your personal preference.

1

2

3


37/112

WATCHIN

GTV/CHANNELCONTROL

35

ON-SCREEN MENUS SELECTION

Press the MENU button and then use D orE button to select the each menu.

Press the G button and then use D E F G button to display the available menus.

Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.

2

1

SETUP PICTURE

TIME

Auto Tuning

Manual Tuning

Channel Edit

AUDIO

Picture Mode : User1Color Temperature : Cool

XD

Advanced

Aspect Ratio : 16:9

Picture Reset

Screen

Sound Mode : Standard

Auto Volume : On

Balance : 0

TV Speaker : On

Clock : Oct 19, 2006, 03:44 AM

Off Time : Off

On Time : Off

Sleep Time : Off

Auto Sleep : Off

Language : English

Input Label

SimpLink : Off

Key Lock : Off

Caption : Off

ISM Method : Orbiter

Low Power : Off

Set ID : 1

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

OPTION

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

For USA For Canada

Only Plasma TV model


38/112

WATCHIN

GTV/CHANNELCONTROL

36

CHANNEL SETUP


BRIGHT- BRIGHT+

ENTER

TIMER RATIOSIMP

LINK

POWER

VCRTVDVD

AUDIO

CABLESTB

MODE

TV INPUT INPUT

EXIT

MENU

Press the MENU button and then use D orE buttonto select the SETUP menu.

Press the G button and then use D orE button toselect Auto Tuning.

Press the ENTER button to begin the channel search.Allow Auto Tuning to complete the channel search

cycle forANTENNA and CABLE.

Automatically finds all channels available through antenna

or cable inputs, and stores them in memory on the channellist.

Run Auto Tuning again after any Antenna/Cable connection

changes.

A password is required to gain access to Auto Tuning menu

if the Lock System is turned on.

2

3

1

Auto Scan (Auto Tuning)

Auto Tuning G

Manual TuningChannel Edit

Selection ( G or ) leads you to

the Auto Tuning screen.

Auto Tuning

Manual Tuning

Channel Edit

Selection ( G or ) leads

you to the Auto Tuning

screen.

NOTE!

DTV (Digital DTV antenna)TV (Analog TV antenna)CADTV (Digital CADTV cable)CATV (Analog CATV cable)

Processing Auto Tuning...

DTV Ch.23

Found Channel(s): 16

Press to stop the current

scan and start ANALOG

ANTENNA channel scan.

MENU PrevNext

Auto Tuning

Manual Tuning

Channel Edit

1

2

3


39/112

WATCHIN

GTV/CHANNELCONTROL

37

BRIGHT-

BRIGHT+

ENTER

TIMER RATIOSIMP

LINK

POWER

VCRTVDVD

AUDIO

CABLESTB

MODE

TV INPUT INPUT

EXIT

MENU

A password is required to gain access to Manual Tuning

menu if the Lock System is turned on.

If selecting DTV or CADTV input signal, you can view the

on-screen signal strength monitor to see the quality of the

signal being received.

Press the MENU button and then use D orE buttonto select the SETUP menu.

Press the G button and then use D orE button toselect Manual Tuning.

Press the G button and then use D orE button toselect T V, DTV, CATV, and CADTV.

Press the G button and then use D orE button toselect channel you want to add or delete.

Press the ENTER button to add or delete the channel.

Press EXIT button to return to TV viewing or press

MENU button to return to the previous menu.

2

1

4

3

6

5

Add/Delete Channel (Manual Tuning)

Auto Tuning

Manual Tuning G

Channel Edit

Select channel type and

RF-channel number.

DTV 2

Auto TuningManual Tuning

Channel Edit

Select channel type and

RF-channel number.

DTV G 12

Press to delete the channel.

DTV 12-0

DE

Bad Normal Good

Auto Tuning

Manual TuningChannel Edit

1

2

3 4 5


40/112

WATCHIN

GTV/CHANNELCONTROL

38


From the default channel list created from the Auto Tuning

channel search, you can create two different types of chan-nel lists in memory: custom list and favorite channel list.

A custom list can be created by toggling each channel on or

off with ENTER button. The channels in the Custom List aredisplayed in black and the channels deleted from the

Custom List are displayed in gray. Once a channel is high-lighted you can add or delete the channel by referring to the

small window at the top-left corner of the screen.

You can create your own Favorite List. Use the FAV button

on the remote control when a channel is highlighted andthen add or delete the channel to/from your Favorite List.

Press the MENU button and then use D orE button toselect the SETUP menu.

Press the G button and then use D orE button toselect Channel Edit.

Press the G button. You will now see a screen filled withchannel numbers and a preview picture.

Use D E F G button to select a channel and then usethe ENTER button to add or delete it. Press FAV button

to add the channel to the Favorite List. The surfing iconwill appear in front of that channel number.

Press EXIT button to return to TV viewing or pressMENU button to return to the previous menu.

1 2 3

4 5 6

7 8

0

9

BACK

VOL CHMUTE FAV

BRIGHT-

BRIGHT+

ENTER

TIMER RATIOSIMP

LINKEXIT

MENU

2

1

4

3

5

Channel Editing

Auto Tuning

Manual Tuning

Channel Edit G Selection ( Gor ) leads you to thechannel edit screen.

Auto Tuning

Manual Tuning

Channel Edit

1

2

3 4


41/112

WATCHIN

GTV/CHANNELCONTROL

39

INPUT LIST

Press the INPUT button to display external device that isconnected to the unit, on screen.

Press the ENTER button to change the input to the activeexternal device. Use the D or E button to select the input

source.BRIG

HT-BRIGHT+

TIMER RATIOSIMP

LINK

POWER

VCRTVDVD

AUDIO

CABLESTB

MODE

TV INPUT INPUT

EXIT

MENU

ENTER

Antenna : Select it when watching the DTV/TV.

Cable: Select it when watching the CADTV/CATV.

AV 1-2 : Select it when watching the VCR or external equipment.

Component 1-2 : Select it when using the DVD or the Digital set-top box depend on connector.

RGB-PC : Select it when using PC depend on connector.

HDMI 1-2 : Select it when using DVD, PC or Digital set-top box depend on connector.

Antenna

Cable

AV 1

AV 2

Component1E

Input List

AV 2

Antenna Cable

If all external input sources are connected:

If no external input sources are not connected:

If there is any external input source connected:

(ex: When connected only to AV 2)

Antenna Cable

AV1

Antenna Cable AV2

AV2 Component1

HDMI2 HDMI1 RGB-PC Component2

2

3

1


42/112

WATCHIN

GTV/CHANNELCONTROL

40


This operates only for the devices with the logo.Please check the logo.

This allows you to control and play other AV devices connectedto the display through HDMI cable without additionalcables and settings.

BRIGHT-

BRIGHT+

ENTER

TIMER RATIOSIMP

LINK

POWER

VCRTVDVD

AUDIO

CABLESTB

MODE

TV INPUT INPUT

EXIT

MENU

Connect the HDMI/DVI IN 1 or HDMI IN 2 terminal of

the TV to the rear terminal (HDMI output) of theSimplink device with the HDMI cable.

After connecting the HDMI jack for the home theaterwith simplink function in the above method, connectthe DIGITAL AUDIO OUT OPTICAL on the back of theTV to the DIGITAL AUDIO IN terminal on the back ofthe simplink device with the Optical cable.

Press the MENU button and then use D orE buttonto select the OPTION menu.

Press the G button and then use D orE button toselect SimpLink.

Press the G button and then use D orE button toselect On.


NOTE!

G When operating the external device with SimpLink, press the TV button among the MODE button on theremote control.

G When you switch the Input source with the INPUT button on the remote control, you can stop the opera-tion of device worked by SimpLink.

G When you select or operate the media device with home theater function, the speaker automatically switch-es to home theater speaker (HT speaker).

SimpLink Preparations

2

3

4

5

1

2

3 4

Language : English

Input label

SimpLink : Off

Key Lock : Off

Caption : Off


Low Power : Off

Set ID : 1

Language

Input Label

SimpLink G

Key Lock

Caption

ISM Method

Low Power

Set ID

Off

On


43/112

WATCHIN

GTV/CHANNELCONTROL

41

BRIGHT-

BRIGHT+

ENTER

TIMER RATIOSIMP

LINK

POWER

VCRTVDVD

AUDIO

CABLESTB

MODE

TV INPUT INPUT

EXIT

MENU

I Direct Play: After connecting AV devices to TV, you can directly control thedevices and play media without additional settings.

I Select AV device: Enables you to select one of AV devices connected to TV andplay it.

I Disc playback: Control connected AV devices by pressing the , ,

, , , , , D E F G, ENTER buttons and buttons for play, stop, pause,

fast reverse, fast forward, chapter skip.

I Power off all devices: When you power off TV, all connected devices are turned off.(This option only applied when the devices are stoped.)

I Switch audio-out: Offers an easy way to switch audio-out.

(A device, which is connected to TV through HDMI cable but does not supportSimpLink, does not provide this function)

Note: To operate SIMPLINK, the HDMI cable over 1.2 Version with *CEC functionshould be used. (*CEC: Consumer Electronics Control).

SimpLink Menu

TV viewing: Switch to the previous TVchannel regardless of the current mode.

DISC playback: Select and play discs.When multiple discs are available, the titlesof discs are conveniently displayed at thebottom of the screen.

VCR playback: Play and control the con-nected VCR.

HDD Recordings playback: Play andcontrol recordings stored in HDD.

Audio Out to HT speaker/AudioOut to TV: Select HT speaker or TVspeaker for Audio Out.

SimpLink Functions

1

2

3

4

5

G Selected Device

G When no device is connected(displayed in gray)

G When a device is connected(displayed in bright color)

1

2

3

4

5

After selecting the TV button of the MODE on the remote control,

press the SIMPLINK button.

Use D E F G button to select the desired device and then pressthe ENTER button.

Control connected AV devices by pressing the , , ,

, , , , DEF G, ENTER buttons.

2

1

3

21 3


44/112

WATCHIN

GTV/CHANNELCONTROL

42

INPUT LABEL


Sets a label to each input source which is not in use when

you press the INPUT button.

BRIGHT-

BRIGHT+

ENTER

TIMER RATIOSIMP

LINK

POWER

VCRTVDVD

AUDIO

CABLESTB

MODE

TV INPUT INPUT

EXIT

MENU

Press the MENU button and then use D orE button toselect the OPTION menu.

Press the G button and then use D orE button toselect Input Label.

Press the G button and then use D orE button toselect the source: AV1, AV2, Component1,

Component2, RGB-PC, HDMI1, or HDMI2.

Press the F orG button to select the label.


2

3

4

5

1

Language

Input label G

SimpLink

Key Lock

Caption

ISM Method

Low Power

Set ID

AV1 Cable Box

AV2 VCR

Component1 DVD

Component2 Set Top Box

RGB-PC VCR

HDMI1 Game

HDMI2 Satellite

Language : EnglishInput label

SimpLink : Off

Key Lock : Off

Caption : Off


Low Power : Off

Set ID : 1

1

2 3 4


45/112

WATCHIN

GTV/CHANNELCONTROL

43

KEY LOCK

The TV can be set up so that it can only be used with the

remote control.

This feature can be used to prevent unauthorized viewing bylocking out the front panel controls.

This TV is programmed to remember which option it waslast set to even if you turn the TV off.

BRIGHT-

BRIGHT+

ENTER

TIMER RATIOSIMP

LINK

POWER

VCRTVDVD

AUDIO

CABLESTB

MODE

TV INPUT INPUT

EXIT

MENU

Press the MENU button and then use D orE button toselect the OPTION menu.

Press the G button and then use D orE button toselect Key Lock.

Press the G button and then use D orE button toselect On orOff.


2

3

4

1Language : EnglishInput label

SimpLink : Off

Key Lock : Off

Caption : Off


Low Power : Off

Set ID : 1

1

2 3

Language

Input Label

SimpLink

Key Lock G

Caption

ISM Method

Low Power

Set ID

Off

On


46/112

PICTURECONTROL

44

PICTURE SIZE (ASPECT RATIO) CONTROL

PICTURE CONTROL

BRIGHT-

MENU BRIGHT+

ENTER

EXITTIMER

SIMPLINK

VCRTVDVD

AUDIO

CABLESTB

MODE

RATIO

This feature lets you choose the way an analog picture with a 4:3 aspect ratio isdisplayed on your TV. When you receive an analog picture with a 4:3 aspect ratioon your 16:9 TV, you need to specify how the picture is to be displayed.IRGB-PC input source use 4:3 or 16:9 aspect ratio.

NOTE!

G If a fixed image is displayed on the screen for a long time, the image maybecome imprinted on the screen and remain visible.This phenomenon is common to all manufactures and in consequence themanufactures warranty does not cover the product bearing this phenomenon.

Press the RATIO button repeatedly to select the desired picture format.

I You can also adjust Aspect Ratio in the PICTURE menu.1

Set by programSelects the proper picture proportion to matchthe sources image.

4:3Choose 4:3 when you want to view a picturewith an original 4:3 aspect ratio.

16:9Adjust the picture horizontally, in a linear pro-

portion to fill the entire screen.

Zoom 1Choose Zoom 1 when you want to view the pic-ture without any alteration. However, the top andbottom portions of the picture will be cropped.

Zoom 2Choose Zoom 2 when you want the picture to bealtered, both vertically extended and cropped.

The picture taking a halfway trade off betweenalteration and screen coverage.

Just ScanFollowing selection will lead to you view the pic-

ture of best quality without loss of original pic-ture in high resolution image.

Notes: If there are noise in original picture, youcan see the noise at the edge.

Just Sc an operates only in DTV/CADTV(720p/1080i/1080p), HDMI-DTV, DVI-DTV input source.

Set By Program

4:3

16:9

Just Scan

Zoom 1

Zoom 2

Set By Program

(4:3 4:3) (16:9 16:9)


47/112

PICTURECONTROL

45

PRESET PICTURE SETTINGSADJUST

SAPSOUNDPICTURE CC

0 BACK

Picture Mode - Preset

Press the PICTURE button repeatedly to select the pictureappearance setup option as below :

Dynamic, Standard, Mi ld, User1 (your own settings),and User2 (your own settings).

Press the EXIT button to save and return to TV viewing.

Picture Mode adjusts the TV for the best picture appearance.

Select the preset value in the Picture Mode menu based on theprogram category.

Dynamic, Standard, Mi ld Settings are preset for the optimumpicture quality at the factory and are not adjustable.

In the User1 and User2 modes only, user can directly adjust

the contrast, brightness, color, sharpness, tint, backlight.

I You can also use the PICTURE menu to adjust Picture Mode.

2

1

Picture Mode G

Color Temperature

XD

Advanced

Aspect Ratio

Picture Reset

Screen

Dynamic

Standard

Mild

User 1

User 2

Picture Mode : User1

Color Temperature : Cool

XD

Advanced

Aspect Ratio : 16:9

Picture Reset

Screen


48/112

PICTURECONTROL

46

PICTURE CONTROL

BRIGHT- BRIGHT+

ENTER

TIMER RATIOSIMP

LINK

POWER

VCRTVDVD

AUDIO

CABLESTB

MODE

TV INPUT INPUT

EXIT

MENU

Color Tone - PresetChoose one of three automatic color adjustments. Set to

warm to enhance hotter colors such as red, or set to cool tosee less intense colors with more blue.

When selecting Picture Mode options (Dynamic, Standard

and Mild), Color Temperature is automatically change.

When selecting Picture Mode options (User 1 and User 2),

you can choose the Color Temperature.

Press the MENU button and then use D orE buttonto select the PICTURE menu.

Press the G button and then use D orE button toselect Color Temperature.

Press the G button and then use D orE button toselect eitherCool, Medium, Warm orUser.


2

3

4

1

1

2 3

Picture Mode

Color Temperature G

XD

Advanced

Aspect Ratio

Picture Reset

Screen

Cool

Medium

Warm

User


XD

Advanced

Aspect Ratio : 16:9

Picture Reset

Screen


49/112

PICTURECONTROL

47

MANUAL PICTURE ADJUSTMENT

BRIGHT- BRIGHT+

ENTER

TIMER RATIOSIMP

LINK

POWER

VCRTVDVD

AUDIO

CABLESTB

MODE

TV INPUT INPUT

EXIT

MENU

Picture Mode - User ModeAdjust the picture appearance to suit your preference and

viewing situations.


Press the G button and then use D orE button toselect Picture Mode.

Press the G button and then use D orE button toselect User 1 orUser2.

Press the G button and then use D orE button toselect the desired picture option (Contrast,Brightness, Color, Sharpness, Tint, orBack Light(LCD TV only)).

I Back Light (LCD TV only)

To control the brightness of the screen, adjust thebrightness of LCD panel.

Press the G button and then use F orG button tomake appropriate adjustments.


2

3

4

5

6

1

Contrast 85

E


XD

Advanced

Aspect Ratio : 16:9

Picture Reset

Screen

EE

User1

Contrast 85 G

Brightness 50

Color 50

Sharpness 50

Tint 0

Back Light 100

R G

Press to confirm.MENU

Picture Mode

Color Temperature

XDAdvanced

Aspect Ratio

Picture Reset

Screen

Dynamic

Standard

Mild

User 1 G

User 2

Selection (Gor ) leads you to

the detailed setting screen.

1

2 3

4

5


50/112

PICTURECONTROL

48

PICTURE CONTROL

BRIGHT- BRIGHT+

ENTER

TIMER RATIOSIMP

LINK

POWER

VCRTVDVD

AUDIO

CABLESTB

MODE

TV INPUT INPUT

EXIT

MENU

You can also adjust the detailed settings (Red, Green, Blue)

by selecting the Color Temperature-User menu.


you can choose the Color Temperature.

Color Tone - User Mode


Press the G button and then use D orE button toselect Color Temperature.

Press the G button and then use D orE button toselect User.

Press the G button and then use D orE button toselect Red, Green, orBlue.


I The adjustment range ofRe d, Green, orB lue is

-20~

+20.


2

3

4

5

6

1

Red 0

E

Picture Mode

Color Temperature

XDAdvanced

Aspect Ratio

Picture Reset

Screen


Selection ( G or ) leads you to


Cool

MediumWarm

User G

User

Red 0 G

Green 0

Blue 0



XD

Advanced

Aspect Ratio : 16:9

Picture Reset

Screen

EE

1

2 3

4

5


51/112

PICTURECONTROL

49

XD - PICTURE IMPROVEMENT TECHNOLOGY

BRIGHT- BRIGHT+

ENTER

TIMER RATIOSIMP

LINK

POWER

VCRTVDVD

AUDIO

CABLESTB

MODE

TV INPUT INPUT

EXIT

MENU


Press the G button and then use D orE button toselect X D.

Press the G button and then use F orG button to

select Auto orManual.


XD is LG Electronics unique picture improving technology

to display a real HD source through an advanced digital sig-nal processing algorithm.

When selecting Picture Mode options (Dynamic, Standard,

and Mild), XD is automatically changed to Auto.


you can choose the Auto / Manual.

When selecting the Manual, you can adjust the XD

Contrast, XD color and XD Noise.

Its not available to use this function in RGB-PC input

source.

Picture ModeColor Temperature

XD G

Advanced

Aspect Ratio

Picture Reset

Screen

Manual

XD Contrast On

XD Color On

XD Noise On

2

3

4

1

Selecting the Manual

1. Press the E button and then use D orE but-ton to select XD Contrast, XD ColororXD Noise.

I XD Contrast: Optimizing the contrastautomatically according to the brightness ofthe reflection.

I XD Color: Adjusting the colors of thereflection automatically to reproduce as

closely as possible to the natural colors.I XD Noise: Removing the noise up to the

point where it does not damage the originalpicture.

2. Use the F orG button to select On orOf f.



XD

Advanced

Aspect Ratio : 16:9

Picture Reset

Screen

1

2 3


52/112

BRIGHT- BRIGHT+

ENTER

TIMER RATIOSIMP

LINK

POWER

VCRTVDVD

AUDIO

CABLESTB

MODE

TV INPUT INPUT

EXIT

MENU

PICTURECONTROL

50

ADVANCED - CINEMA 3:2 PULL DOWN MODE

PICTURE CONTROL


Press the G button and then use D orE button toselect Advanced.

Press the G button and then use D orE button toselect Cinema 3:2 Mode.

Use F orG button to select On orOf f.


Set up the TV for the best picture appearance for viewing

movies.

When you operate Cinema 3:2 Mode (3:2 Pull-Down Modeor Cinema Correction Mode), the TV will adjust 24 fps

video from movies to 30 fps video for display.

This feature operates only in TV (Analog TV/CATV, Digital

DTV/CADTV), AV1, AV2, Component 480i/1080i, andHDMI 1080i mode.

2

3

4

5

1

Picture Mode

Color Temperature

XD

Advanced G

Aspect Ratio

Picture Reset

Screen

Cinema 3:2 Mode Off

Black Level Low


XD

Advanced

Aspect Ratio : 16:9

Picture Reset

Screen

2 3 4

1


53/112

PICTURECONTROL

51

ADVANCED - BLACK (DARKNESS) LEVEL

BRIGHT- BRIGHT+

ENTER

TIMER RATIOSIMP

LINK

POWER

VCRTVDVD

AUDIO

CABLESTB

MODE

TV INPUT INPUT

EXIT

MENU


Press the G button and then use D orE button toselect Advanced.

Press the G button and then use D orE button toselect Black level.

Use F orG button to select Low orHigh.

I Low

The screen gets darker.

I High

The screen gets brighter.


Adjusting the contrast and the brightness of the screen

using the black level of the screen.

This feature operates only in AV1, AV2, HDMI1, or HDMI2mode.

2

3

4

5

1

Picture Mode

Color Temperature

XD

Advanced G

Aspect Ratio

Picture Reset

Screen

Cinema 3:2 Mode Off

Black Level Low


XD

Advanced

Aspect Ratio : 16:9

Picture Reset

Screen

2 3 4

1


54/112

PICTURECONTROL

52

PICTURE RESET

PICTURE CONTROL

BRIGHT- BRIGHT+

ENTER

TIMER RATIOSIMP

LINK

POWER

VCRTVDVD

AUDIO

CABLESTB

MODE

TV INPUT INPUT

EXIT

MENU


Press the G button and then use D orE button toselect Picture Reset.

Press the G button to reset the Picture menu optionsto original values.

Use to quickly reset all the Picture menu options to their

original factory preset values.

2

3

1

Picture Mode

Color Temperature

XD

Advanced

Aspect Ratio

Picture Reset G

Screen

Selection ( G or ) resets to the

factory settings(defaults).


XD

Advanced

Aspect Ratio : 16:9

Picture Reset

Screen

2 3

1


55/112

PICTURECONTROL

53

IMAGE STICKING MINIMIZATION (ISM) METHOD - Plasma TV only

BRIGHT-

BRIGHT+

ENTER

TIMER RATIOSIMP

LINK

VCRTV

DVD

AUDIO

CABLESTB

MODE

EXIT

MENU


Press the G button and then use D orE button toselect ISM Method.

Press the G button and then use D orE button toselect eitherNormal, Orbiter, Inversion, orWhiteWash.

I Normal

If image sticking is never a problem, ISM is not neces-sary - set to Normal.

I Orbiter

Orbiter may help prevent ghost images. However, it isbest not to allow any fixed image to remain on the

screen. To avoid a ghost image on the screen, theimage will move once per 2 minutes: Left RightUpside Downside Right Left Downside

Upside.

I Inversion

Inversion will automatically invert the plasma displaypanel color every 30 minutes.

I White Wash

White Wash removes ghost images from the screen.

Use sparingly. Watch the TV normally for a while beforeusing this feature to see if the ghost image disappears on

its own.


2

3

4

1

A frozen still picture from a PC/video game displayed on the

screen for prolonged periods will result in a ghost image.Use our unique method to minimize any fixed image on thescreen.

G An excessive ghosted image may be impossible toclear entirely with White Wash. To return to nor-mal viewing, press the any button.

NOTE!

Language : English

Input Label

SimpLink : Off

Key Lock : Off

Caption : Off


Low Power : Off

Set ID : 1

Language

Input Label

SimpLink

Key Lock

Caption

ISM Method G

Low Power

Set ID

Normal

Orbiter

Inversion

White Wash

2 3

1


56/112

PICTURECONTROL

54

LOW - POWER PICTURE MODE - Plasma TV only

PICTURE CONTROL

BRIGHT- BRIGHT+

ENTER

TIMER RATIOSIMP

LINK

POWER

VCRTVDVD

AUDIO

CABLESTB

MODE

TV INPUT INPUT

EXIT

MENU

Low power reduces the plasma display power consumption.


Press the G button and then use D orE button toselect Low Power.

Press the G button and then use D orE button toselect On orOff.

I When you select O n, the screen darkens.


2

3

4

1

Language : English

Input Label

SimpLink : Off

Key Lock : Off

Caption : Off


Low Power : Off

Set ID : 1

Language

Input Label

SimpLink

Key Lock

Caption

ISM Method

Low Power G

Set ID

Off

On

2 3

1


57/112

SOUND&LA

NGUAGECONTROL

55

AUTO VOLUME LEVELLER (AUTO VOLUME)


BRIGHT- BRIGHT+

ENTER

TIMER RATIOSIMP

LINK

POWER

VCRTVDVD

AUDIO

CABLESTB

MODE

TV INPUT INPUT

EXIT

MENU

Press the MENU button and then use D orE buttonto select the AUDIO menu.

Press the G button and then use D orE button toselect Auto Volume.

Press the G button and then use D orE button toselect O n orOf f.


Scans for changes in sound levels during commercials, then

adjusts the sound to match the specified audio level.

Auto Volume makes sure that the volume level remains con-sistent whether you are watching a commercial or a regular

TV program.

2

3

4

1

Sound Mode

Auto Volume G

Balance

TV Speaker

OffOn

Sound Mode : StandardAuto Volume : On

Balance : 0

TV Speaker : On

2 3

1


58/112

SOUND&LA

NGUAGECONTROL

56


ADJUST

SAPSOUNDPICTURE CC

0 BACKPRESET SOUND SETTINGS (SOUND MODE)

Sound Mode lets you enjoy the best sound without any special

adjustment because the TV sets the appropriate sound optionsbased on the program content.

Standard, Music, Movie, and Sports are preset for good

sound quality at the factory and are not adjustable.

Press the SOUND button repeatedly to select the appropriatesound setup as below:

Standard, Music, Movie, Sports, and User (your ownsettings).

Press EXIT button to return to TV viewing.

IYou can also adjust Sound Mode in the AUDIO menu.

2

1

Sound Mode G

Auto Volume

Balance

TV Speaker

Standard

Music

Movie

Sports

User

Sound Mode : Standard

Auto Volume : On

Balance : 0

TV Speaker : On


59/112

SOUND&LA

NGUAGECONTROL

57

SOUND SETTING ADJUSTMENT - USER MODE

Front Surround 3D EchoSound SystemSRS TruSurround XT

Takes advantage of any multi-channel format withoutneeding to add extra speakers or equipment. Dialog clarity,bass enrichment, and the addition of stereo audioenhancement produces an immersive sound experiencefrom standard stereo material.

3D EchoSound System

Creates a stunning simulated stereo effect from any monosound and a realistic three-dimensional sound with a verywide and deep sound stage.


Press the G button and then use D orE button toselect Sound Mode.

Press the G button and then use D orE button to

select User .

Press the G button and then use D orE button toselect the desired sound option (Treble, Bass, orFront Surround).


Selecting the Front surround

Press the G button and then use F orG button toselect Of f, 3D EchoSound System orSRS (SoundRetrieval System) TruSurround XT.


Adjust the sound to suit your taste and room situations.

Sound ModeAuto Volume

Balance

TV Speaker

Selection (Gor ) leads you to


StandardMusic

Movie

Sports

User G

2

3

4

5

6

1Sound Mode : Standard

Auto Volume : On

Balance : 0

TV Speaker : On

User

Treble 50 GBass 50

Front Surround Off


1

2 3

4

5


60/112


61/112

SOUND&LA

NGUAGECONTROL

59

TV SPEAKERS ON/OFF SETUP

BRIGHT- BRIGHT+

ENTER

TIMER RATIOSIMP

LINK

POWER

VCRTVDVD

AUDIO

CABLESTB

MODE

TV INPUT INPUT

EXIT

MENU


Press the G button and then use D orE button toselect TV Speaker.

Press the G button and then use D orE button toselect O n orOf f.


Turn the TV speakers off if using external audio equipment.

Feature turns the TV Speakers option On or Off.

Sound Mode

Auto Volume

Balance

TV Speaker G Off

On

2

3

4

1Sound Mode : StandardAuto Volume : On

Balance : 0

TV Speaker : On

1

32


62/112

SOUND&LA

NGUAGECONTROL

60

STEREO/SAP BROADCASTS SETUP


ADJUST

SAPSOUNDPICTURE CC

0 BACK

This TV can receive MTS stereo programs and any SAP (Secondary

Audio Program) that accompanies the stereo program if the sta-tion transmits an additional sound signal as well as the originalone and when you select Stereo or SAP on the remote control.

Mono sound is automatically received if the broadcast is only inMono; even though Stereo or SAP has been selected.

Select Mono if you want to listen to the mono sound in remoteareas during stereo/SAP broadcasting.

Stereo or SAP can be received in Analog channel.

Use the SAP button to select your desired MTS mode inanalog signal. Each time you press the SAP button, Mono,Stereo, orSAP appear in turn.

I If other languages available on the digital signal, selectthem with the SAP button.

Press EXIT button to save and return to TV viewing.2

1


63/112

SOUND&LA

NGUAGECONTROL

61

AUDIO LANGUAGE

BRIGHT- BRIGHT+

ENTER

TIMER RATIOSIMP

LINK

POWER

VCRTVDVD

AUDIO

CABLESTB

MODE

TV INPUT INPUT

EXIT

MENU

Other languages may be available if a digital signal is provided

by the broadcasting station.

This feature operates only in DTV/CADTV mode.


Press the G button and then use D orE button toselect Language.

Press the G button and then use D orE button toselect Audio.

Use F orG button to select: Engl ish, Spanish, orFrench.


2

3

4

5

1Language : EnglishInput Label

SimpLink : Off

Key Lock : Off

Caption : Off


Low Power : Off

Set ID : 1

Language G

Input Label

SimpLink

Key Lock

Caption

ISM Method

Low Power

Set ID

Menu English

Audio English

Language

Input Label

SimpLink

Key Lock

Caption

ISM Method

Low Power

Set ID

Menu English

Audio English

1

4

32


64/112

SOUND&LA

NGUAGECONTROL

62

ON-SCREEN MENUS LANGUAGE SELECTION


BRIGHT- BRIGHT+

ENTER

TIMER RATIOSIMP

LINK

POWER

VCRTVDVD

AUDIO

CABLESTB

MODE

TV INPUT INPUT

EXIT

MENU

The menus can be shown on the screen in the selected lan-

guage. First select your language.


Press the G button and then use D orE button toselect Language.

Press the G button and then use D orE button toselect Menu.

Use F orG button to select your desired language.

From this point on, the on-screen menus will be shownin the selected language.


1

2

3

4

5Language

Input Label

SimpLink

Key Lock

Caption

ISM Method

Low Power

Set ID

Menu English

Audio English

Language G

Input Label

SimpLink

Key Lock

Caption

ISM Method

Low Power

Set ID

Menu English

Audio English

Language : EnglishInput Label

SimpLink : Off

Key Lock : Off

Caption : Off


Low Power : Off

Set ID : 1

1

4

32


65/112

SOUND&LA

NGUAGECONTROL

63

CAPTION MODEADJUST

SAPSOUNDPICTURE CC

0 BACK

Use the CC button to select Caption O n orOf f.

I When selecting Off, Sub-menus for Analog, DTV, andDigital Option become disabled.

Press EXIT to save and return to TV viewing.2

1

Caption must be provided to help people with hearing loss watch

TV.

I You can also adjust Caption in the OPTION menu.

Language : English

Input Label

SimpLink : Off

Key Lock : Off

Caption : Off


Low Power : Off

Set ID : 1

Language

Input Label

SimpLink

Key Lock

Caption G

ISM Method

Low Power

Set ID

Mode On

Analog Text1

Digital Service3

Digital Option


66/112

SOUND&LA

NGUAGECONTROL

64


BRIGHT- BRIGHT+

ENTER

TIMER RATIOSIMP

LINK

POWER

VCRTVDVD

AUDIO

CABLESTB

MODE

TV INPUT INPUT

EXIT

MENU

Analog Broadcasting System CaptionsSelect a caption mode for displaying captioning inf

LG Manual TV

Documents

Transcript of LG Manual TV