Lesson Plans 16
-
Upload
stefano-monti -
Category
Documents
-
view
220 -
download
0
Transcript of Lesson Plans 16
-
7/24/2019 Lesson Plans 16
1/5
3D CAD ( CAD M2)Kim Rask Petersen
Lesson 1 and 2: Introduction and Sheet Metal ( P 269-P324)
Introduction to the Course CAD M2
Face
Contour Flange
Lofted Flange
Flange Features
Corner Round and Champfer
Unfold and Refold
Bend tables and manufacturing rules
-
7/24/2019 Lesson Plans 16
2/5
3D CAD ( CAD M2)Kim Rask Petersen
Lesson 3 and 4 Part and Feature Reuse ( P327-P373)
Working with iParts
Creating and Modifying iParts
iParts tables
Using iParts in Design
Working with iFeatures
Creating iFeatures
Reusing existing geometry
Cloning
Linking parameters between two files
Introducing Content Center
Placing parts into an Assembly
Placing parts from Content Center
Customising Content Center Libraries
-
7/24/2019 Lesson Plans 16
3/5
3D CAD ( CAD M2)Kim Rask Petersen
Lesson 5 Assembly Reuse and Configuration (P435-P460)
Copying Design
View Representation Position Representation
iAssemblies
Design Accelerator
Lesson 6: Frame Generator(P713-P748)
Handing out the Course Assignment Inserting Frame Members
Adding end treatments
Maintaining Frames
Lesson 7. Weldment Design ( P501-P536)
Creating Weld Beads
Creating Fillet Welds
Weld properties and Combinations
Using Weld Symbols
Creating Drawing Documentations
-
7/24/2019 Lesson Plans 16
4/5
3D CAD ( CAD M2)Kim Rask Petersen
Lesson 8 : Plastic Design Features & Mold (P837-P857)
Shell Features
Split Features
Grill Features
Boss Features
Lip and Grove Features
Snap Fit Features
Rib and Web Features
Draft Features
Flow Simulation
Lesson 9: Inventor Routed Systems/ Tube and Pipe(P861-879)
Tube and Pipe styles
Authoring Tube and Pipe Components
Placing Fittings
Creatingh Routes Existing sketch
3D orthogonal Route Tool
Flexible Hose Route
-
7/24/2019 Lesson Plans 16
5/5
3D CAD ( CAD M2)Kim Rask Petersen
Lesson 11: Inventor Studio and Case from previous test
Animating with Inventor Studio ( P 771-785)
A test from 2013 and 2014 Group Work
Lesson 12: Final Test ( 2 hour) , counts 40%
Lesson 10 : Advanced Modelling Techniques (P207-267)
Complex sweeps and Lofts
Creating Multi-body parts
Creating Derived Parts and Assemblies
Surfacing..some important tools