lesson Plan Name of the Faculty : Sh. Rajinder Dahiya...
Transcript of lesson Plan Name of the Faculty : Sh. Rajinder Dahiya...
Practical
Lecture
day Topic (including assignment/ test) Topic
1 Introduction about subject
2 Introduction about Mother Board
3 Introduction to different type of mother boards
4 Single Board Based System
5 Block diagram of motherboard
6 Installation of Computer System
7 Revision
8 Buses and Ports
9 Different type of Buses
10 PCI, SCSI and Serial and Parallel ports (COM ports) Ports COM1
11 PCI, SCSI and Serial and Parallel ports (COM ports) Ports COM1
12 PCI, SCSI and Serial and Parallel ports (COM ports) Ports COM1
13 Basic of LPTI, USB
14 Basic of RS 232 C,
15 use of computer for instrumentation
16 Introduction of Memory
17 Principle and construction of Hard Disk Drive (HDD).
18 Floppy Disk Controller & Hard Disk
19 Basic of Controller
20Pen Drives, common faults with hard disk drive loppy disk drive,
RAM
21 1st Sessional Test
22 Keyboard and Mouse
23 Block Diagram of keyboard Controller
24 keyboard switches
25 keyboard faults
26 mouse,common faults with mouse
27 basic of optical mouse
28 Introduction to scanner
Lesson Plan Duration : Jan-Apr-2018
lesson PlanName of the Faculty : Sh. Rajinder Dahiya
Discipline : Electronics and Communication Engg.
Semester : VIth
Subject : MAINTENANCE OF COMPUTER SYSTEM
3rd
4th
5th
Work Load (Lecture/ Practical) per week (in hours): 04 HOURS (Lecture) 03 Hours per Group (PRACTICAL)
Week
Theory
1st Introduction about Practical
of MOCS
2nd Monitors (LCD and LED)
HDD, Partitioning and
Formatting
DOT Matrix Printer
Laser Printer
6th
7th
Mother board based on latest
microprocessor and chipset
CMOS Set up.
DVD-ROM/DVD Writer
29 Introduction to digitizer
30 CRT Display Devices
31 Block Diagram of Computer Monitor.
32 Principle of operation of Computer Monitor
33 Difference between TV and Computer Monitor.
34 Difference between TV and Computer Monitor.
35 Video display Adaptors (monochrome and Colour).
36 Introduction to solid state displays
37 REVISION
38 REVISION
39 REVISION
40 2nd Sessional Test
41 basic of Printers
42 Printing Mechanism
43 Construction and working principles of Dot Matrix Printer.
44 Construction and working principles of Inkjet Printer.
45Construction and working principles of Laser Printer,Printer
Controller.
46 Centronics Interface.
47 Signals from PC to Printer and Printer to PC.
48 Signals from PC to Printer and Printer to PC.
49 Networking Devices
50 Basic of LAN, WAN,
51 Basic of Wi-Fi, WLAN
52 Basic of ROUTER,
53 Basic of SWITCH, HUB
54 Modems: Need and functions of modems.
55 Need and functions of modems Laptop.
56 applications of Laptop and MODEM.
57 Revision
58 Revision
59 Revision
60 3rd Sessional Test
* At least Three Assignment covering substantial portion of syllabus to be given.
9th
10th
8th
Installation of any operating
system.
Connectors and Cables
MODEM/ROUTER/SWITCH
15th Revision & Viva
Establish LAN,WLAN, using
Networking Devices
Study of LAPTOP, IPAD,
Smart Phone
Revision & Viva
Revision & Viva
12th
13th
14th
11th
Practical
Lecture
day Topic (including assignment/ test) Topic
1 Introduction about Subject
2 Wireless Communication Basics
3 Advantages of wireless communication
4 Electromagnetic waves
5 Basic of Frequency Spectrum used
6 Paging system
7 Cordless Telephone System
8 Cellular Telephone System
9 Cellular Telephone System
10 Comparison of above wireless communication systems
11 Cellular telephone system:
12 Introduction to First Generation
13 Introduction to Second Generation
14 Introduction to Third Generation
15 Introduction to Fourth Generation of cellular telephone system
16 Introduction to Fourth Generation of cellular telephone system
17 REVISION
18 REVISION
19 REVISION
20 1st Sessional Test
21 Cellular Concept
22 Cell area
23 Capacity of cell
24 Frequency Response
25 Co-channel Interference
26 Adjacent channel Interference
27 Power Control for reducing Interference
28Improving coverage and capacity in cellular system,Cell
Splitting,Sectoring
Lesson Plan Duration : Jan-Apr-2018
lesson PlanName of the Faculty : Smt. Suchet Kumari
Discipline : Electronics and Communication Engg.
Semester : VIth
Subject : WIRELESS AND MOBILE COMMUNICATION
2nd
Study the features,
specification and working of
cellular mobile
6th
7th
Signal strength measurement
of various points from a
transmitting antenna/cordless
phone
Signal strength measurement
of various points from a
transmitting antenna/cordless
phone
Visit of a Mobile Switching
Centre(MSC) in the nearest
M.S. facility provider
Work Load (Lecture/ Practical) per week (in hours): 03 HOURS (Lecture) 03 Hours per Group (PRACTICAL)
Week
Theory
1st
Introduction about Practical
WIRELESS AND MOBILE
COMMUNICATION
3rd
4th
5th
Visit of a Mobile Switching
Centre(MSC) in the nearest
M.S. facility provider
Demonstration of Base Trans
Receiver(BTS) with nearby
cellular tower
29 Repeater for Range Extension
30 Multiple Access Techniques for Wireless Communication
31 Introduction to Multiple Accesses.
32 Frequency Division Multiple Access (FDMA)
33 Time Division Multiple Access (TDMA)
34 Code Division Multiple Access (CDMA)
35 Spread Spectrum Multiple Access (SSMA)
36 Frequency Hopping spread Spectrum (FHSS)
37 Comparison of FDMA/TDMA/CDMA
38 REVISION
39 REVISION
40 2nd Sessional Test
41 Mobile Communication Systems
42Introduction of Global Systems for Mobile Communication (GSM)
and its architecture,
43Introduction of Global Systems for Mobile Communication (GSM)
and its architecture,
44Introduction of CDMA System, comparison of CDMA and GSM
Systems
45 Introduction of GPRS System.
46 Introduction of GPS System.
47 Introduction to Blue tooth,
48 Introduction to Wi-Fi
49 Digital and Data Communication
50 Basic block diagram of digital and data communication system.
51 Basic block diagram of digital and data communication system.
52 Basic block diagram of digital and data communication system.
53 Basic block diagram of digital and data communication system.
54 REVISION
55 REVISION
56 REVISION
57 REVISION
58 REVISION
59 REVISION
60 3rd Sessional Test
8th
* At least Three Assignment covering substantial portion of syllabus to be given.
11th
9th
10th
Revision & Viva
Revision & Viva
Data transfer using WI-FI
Pairing of two devices using
Bluetooth12
th
13th
14th
15th
Observing call processing of
CDMA trainer Kit
Observing call processing of
GSM trainer Kit
Observing call processing of
GSM trainer Kit
Demonstration of Base Trans
Receiver(BTS) with nearby
cellular tower
Practical
Lecture
day Topic (including assignment/ test) Topic
1 Introduction about subject.
2 Anatomy and physiology.
3 Elementary ideas of cell structure.
4 Elementary ideas of Heart.
5 Elementary ideas of circulatory system.
6 Elementary ideas of Central nervous system.
7 Elementary ideas of Muscle action.
8 Elementary ideas of Respiratory system.
9 Body temperature and reproduction system.
10 Overview of Medical Electronics Equipments.
11 Classification of Medical Electronics Equipments.
12 Application and specifications of diagnostic.
13 Application and specifications of therapeutic .
14 Application and specifications of clinical laboratory equipment.
15 Method of operation of all above instruments.
16 Method of operation of all above instruments.
17 REVISION
18 REVISION
19 REVISION
20 1st Sessional Test
21 Electrodes
22 Bioelectric signals
23 Bio electrodes, Electrode
24 Electrode tissue interface contact impedance.
25 Types of Electrodes
26 Electrodes used for ECG , EEG
27 Transducers
28 Typical signals from physiological parameters.
29 Pressure transducer
Lesson Plan Duration : Jan-Apr-2018
lesson PlanName of the Faculty : Sh. Sandeep Goel
Discipline : Electronics and Communication Engg.
Semester : VIth
Subject : MEDICAL ELECTRONICS
3rd
4th
5th
6th
7th
Work Load (Lecture/ Practical) per week (in hours): 04 HOURS (Lecture) 03 Hours per Group (PRACTICAL)
Week
Theory
1st Introduction about Practical
MEDICAL ELECTRONICS
To operate and feminization
with:B.P. Apparatus,ECG
Machine
To measure the
concentration of blood sugar
with Glucometer (fasting,
P.P., Random)
To measure the
concentration of blood sugar
with Glucometer (fasting,
P.P., Random)
To measure the Respiration
rate,Pulse rate
To measure the Respiration
rate,Pulse rate
Installation of small medical
equipment in laboratories of
Hospital precautions to be
taken.
Study of large medical
equipment in Hospital /
Nursing home.
8th
2nd
30 Flow transducer
31 Tmperature transducer
32 Pulse sensor
33 Respiration sensor
34 Bio Medical Recorders
35 ECG Machine
36 EEG Machine
37 EMG Machine
38 REVISION
39 REVISION
40 2nd Sessional Test
41 Patient Monitoring Systems.
42 Heart rate measurement.
43 Pulse rate measurement.
44 Respiration rate measurement.
45 Blood pressure measurement.
46 Principle of defibrillator and pace mark.
47 Use of Microprocessor in patent monitoring
48 Blood Sugar Measurement
49 Safety Aspects of Medical Instruments
50 Gross current shock
51 Micro current shock
52 Special design from safety consideration
53 Safety standards.
54 REVISION
55 REVISION
56 REVISION
57 REVISION
58 REVISION
59 REVISION
60 3rd Sessional Test
* At least Three Assignment covering substantial portion of syllabus to be given.
15th
Study of large medical
equipment in Hospital /
Nursing home.
9th
10th
11th
12th
13th
14th
8th
Revision & Viva
Study of large medical
equipment in Hospital /
Nursing home.
Operation and use of Electro-
physiotherapy
Operation and use of Electro-
physiotherapy
Maintenance schedule for
different equipment and their
records in a hospital
Revision & Viva
Revision & Viva
Practical
Lecture
dayTopic (including assignment/ test) Topic
1 Introduction about subject
2 Concept /Meaning of Entrepreneurship and its need.
3Qualities and functions of entrepreneur and barriers in
entrepreneurship.
4Sole proprietorship and partnership forms of business
organizations.
5Schemes of assistance by entrepreneurial support agencies at
National, State, District level:NSIC, NRDC
6DC:MSME, SIDBI, NABARD, Commercial Banks, SFC’s TCO,
KVIB, DIC.
7Technology Business Incubator (TBI) and Science and
Technology Entrepreneur Parks (STEP).
8 Market Survey and Opportunity Identification.
9 Scanning of business environment,1st Assignment
10Salient features of National and State industrial policies and
resultant business opportunities.
11 Types and conduct of market survey
12Assessment of demand and supply in potential areas of
growth.
13 Identifying business opportunity.
14 Considerations in product selection.
15 1st
Sessional Test
16 Project report Preparation.
17 Preliminary project report.
18Detailed project report including Technical, economic and
market feasibility.
19 Common errors in project report preparations
20 Exercises on preparation of project report,2nd Assignment
21 Introduction to Management.
N/A
lesson PlanName of the Faculty : Sh. Rajiv Sapra
Discipline : Electronics and Communication Engg.
Semester : VIth
Subject : ENTREPRENEURSHIP DEVELOPMENT AND MANAGEMENT
Lesson Plan Duration : Jan-Apr-2018
Work Load (Lecture/ Practical) per week (in hours): 03 HOURS (Lecture)
3rd
4th
5th
Week
Theory
1st
2nd
6th
7th
Practical
Lecture
dayTopic (including assignment/ test) Topic
Week
Theory
22 Definitions and importance of management.
23Functions of management: Importance and Process of
planning, organizing, staffing,directing and controlling.
24 Principles of management (Henri Fayol, F.W. Taylor).
25 Concept and structure of an organization.
26Types of industrial organizations,Line organization, Line and
staff organization,Functional Organization.
27 Leadership and Motivation,Leadership,Definition and Need
28Qualities and functions of a leader,Manager Vs leader,Types of
leadership.
29Motivation,Definitions and characteristics, Factors affecting
motivation,Theories of motivatio.
30 2nd
Sessional Test
31
Management Scope in Different Area,Human Resource
Management, Introduction and objective,Introduction to Man
power planning, recruitment and selection.
32 Introduction to performance appraisal methods.
33Material and Store Management,Introduction functions, and
objectives.
34 ABC Analysis and EOQ.
35Marketing and sales, Introduction, importance, and its
functions,Physical distribution.
36 Introduction to promotion mix,Sales promotion.
37Financial Management,Introductions, importance and its
functions.
38 Elementary knowledge of income tax, sales tax.
39 Excise duty, custom duty and VAT,3rd Assignment
40Miscellaneous Topics,Customer Relation Management
(CRM),Definition and need,Types of CRM.
41Total Quality Management (TQM)Statistical process
control,Total employees Involvement
42 Just in time (JIT).
43Intellectual Property Right (IPR) Introductions, definition and
its importance.
44 Infringement related to patents, copy right, trade mark.
45 3rd
Sessional Test
* At least Three Assignment covering substantial portion of syllabus to be given.
N/A
10th
9th
8th
15th
13th
14th
12th
11th