LEHL1 - fluorescent.ldpi-inc.com · Globe Lens: Prismatic Tempered Glass Powder coat gray. All...
Transcript of LEHL1 - fluorescent.ldpi-inc.com · Globe Lens: Prismatic Tempered Glass Powder coat gray. All...
1-800-854-0021 www.ldpi-inc.comLDPI® is a registered trademark of LDPI, Inc. © LDPI, Inc.
Product design and specifications subject to change without notice. Visit www.ldpi-inc.com for the most current version and photometric data. v06.29.20
LEHL1Chemical Processing ● Industrial ● Oil / Gas ● Shipyards / Marine ● Water Treatment
HAZARDOUS LOCATION
1 2 3 4 5 6
The LEHL1 is designed and listed for hazardous, marine, and wet locations. This product is ideal for replacing High Pressure Sodium (HPS) and Metal Halide (MH) fixtures for increased energy savings and maintenance.
CERTIFICATIONS UL844 / CSA-C22.2 No.137 (Hazardous) CI D2, Grps A,B,C,D CII D1, Grps E,F,G CII D2, Grps F,G CIII Simultaneous Presence
T-Codes: CID2=T4A / CIID1=T5 / CIID2=T5 UL1598 / CSA-C22.2 No.250 (Wet/Damp) UL1598A (Marine Outside) DLC (inquire for specific part numbers) Lumen Maintenance (L70) >54,000 hrs. (reported) CRI >70
-40°C to 55°C Ambient (L1-L3)-40°C to 52°C Ambient (L4)RH Ambient Humidity 5% to 95%NEMA 3 and NEMA 4XIP66FCC
CONSTRUCTION Copper-free cast aluminum housing Flat Lens: Tempered Glass Globe Lens: Prismatic Tempered Glass Powder coat gray All exposed fasteners are stainless steel Single 3/4” NPT Hub Weight: 11 lbs.
ELECTRICAL120-277 / 347-480VAC10Kv surge protector built in - Standard3Ft 3-Wire whip standard, factory installed
FEATURES High lumen output up to 150 Lm/W Shock and vibration resistant Thermal shock and impact resistant lens Mounting: Wall (Flood), Stanchion, Ceiling and Pendent 5 Year Warranty
PERFORMANCE
1 SERIES 2 SOURCE 3 VOLTAGE 4 CCT 5 OPTICS / BEAM 6 LENS 7 MOUNTLEHL1 L1: 45W (V1 only)
L2: 65W (V1 only)L3: 40W (V2 only)L4: 60W (V2 only)
V1: 120-277VAC (50/60Hz)V2: 347-480VAC (50/60Hz)
3: 3,000K4: 4,000K5: 5,000K
V110: 110° TYPE VV130*: 130° TYPE V
*Globe only
C: ClearD: DiffusedG: Globe*
*V130 Beam
P: Pendent 3/4”, w/ Yoke Bracket *U: Universal **
* Yoke Bracket pre-installed** Ceiling, Stanchion, Wall mounts ordered separately
7
Clear Lens Diffused Lens
LEHL1
SourceVoltage (VAC)
50/60Hz
Input Current
(A)Wattage
(W) CCT
Lumen Output* (Lm)Clear Lens
Diffused Lens
Globe Lens
L1 120-277 .38 - .16 453,000K 6480 5450 55204,000K 6375 5380 59605,000K 6750 5750 5760
L2 120-277 .54 - .23 653,000K 9800 8250 82004,000K 9675 8260 89405,000K 10150 8650 8960
L3 347-480 .12 - .08 403,000K 5750 4950 47904,000K 6220 5350 51705,000K 6150 5250 5100
L4 347-480 .17 - .13 603,000K 9150 7800 75504,000K 9990 8530 83305,000K 10050 8540 8300
* Nominal values
1-800-854-0021 www.ldpi-inc.comLDPI® is a registered trademark of LDPI, Inc. © LDPI, Inc.
Product design and specifications subject to change without notice. Visit www.ldpi-inc.com for the most current version and photometric data. v.06.29.20
Shown with Globe Lens (G)option & Wire Guard (WG03)
LEHL1Chemical Processing ● Industrial ● Oil / Gas ● Shipyards / Marine ● Water Treatment
HAZARDOUS LOCATION
UNIVERSAL MOUNTING ACCESSORIES (Field Installed, Order Separately)Part Number Description
JB01 Ceiling/Junction Box: 3/4” NPT x 4Gray Painted A356 Aluminum AL
SN9001 Stanchion Mount - 90°: 1 1/4” NPTGray Painted A356 Aluminum AL
SN2501 Stanchion Mount - 25°: 1 1/4” NPTGray Painted A356 Aluminum AL
SN9002 Stanchion Mount - 90°: 1 1/2” NPTGray Painted A356 Aluminum AL
SN2502 Stanchion Mount - 25°: 1 1/2” NPTGray Painted A356 Aluminum AL
WL90 Wall Mount - 90°: 3/4” NPTGray Painted A356 Aluminum AL
WL25 Wall Mount - 25°: 3/4” NPTGray Painted A356 Aluminum AL
ACCESSORIES - (Field Installed, Order Separately)Part Number Description
WG02 Stainless steel wire guard (flat lens)
WG03 Stainless steel wire guard (globe lens)
DIMENSIONS - (PENDENT / YOKE BRACKET)
12.2"(311mm)
6.1"(155mm)
10.3"(262mm)
7.0"(178mm)
3/4" NPT
6.2"(157mm)
11.3"(288mm)
12.4"(315mm)11.5"
(292mm)
2.76"(70mm)
1.34"(34mm)
.39" (10mm)
1.57"(40mm)
.31" (8mm)
1-800-854-0021 www.ldpi-inc.comLDPI® is a registered trademark of LDPI, Inc. © LDPI, Inc.
Product design and specifications subject to change without notice. Visit www.ldpi-inc.com for the most current version and photometric data. v.06.29.20
Part Number Flat Lens Globe Lens Junction Box
CEILING MOUNT#JB01
WALL MOUNT (90°)#WL90
WALL MOUNT (25°)#WL25
STANCHION MOUNT (90°)#SN9001 (1-1/4” NPT)#SN9002 (1-1/2” NPT)
STANCHION MOUNT (25°)#SN2501 (1-1/4” NPT)#SN2502 (1-1/2” NPT)
12.0"(304mm)
13.7"(347mm)
8.6"(219mm)
13.7"(347mm)
10.3"(262mm)
12.6"(319mm)
13.4"(341mm)
7.2"(182mm)
13.4"(341mm)
13.9"(354mm)
13.6"(345mm)
13.9"(354mm)
10.3"(260mm)
14.9"(378mm)
13.2"(334mm)
9.5"(241mm)
13.2"(334mm)
12.8"(326mm)
7.5"(189mm)
10.3"(262mm)
LEHL1Chemical Processing ● Industrial ● Oil / Gas ● Shipyards / Marine ● Water Treatment
HAZARDOUS LOCATION
DIMENSIONS - (UNIVERSAL MOUNT / Accessories Field Installed, Order Separately)
Universal Mount with Globe LensWL90 & WG03 accessories
Universal MountWL90 & WG02 accessories
4.33"(110mm)
4.33"(110mm)
.31" (8mm)