Legend Series - vacpump.comgrease lubricated through fittings. Lip-type seals prevent oil and grease...
Transcript of Legend Series - vacpump.comgrease lubricated through fittings. Lip-type seals prevent oil and grease...
Legend® SeriesPositive Displacement Blowers & Vacuum Pumps
Sutorbilt Legend Series
2
Setting the Industry Standard for Over 70 YearsGardner Denver’s Sutorbilt® Legend® line of rotary positive displacement lobe blowers and vacuum pumps are the result of more than seventy years experience in the design, manufacture and support of superior industrial equipment.
Why the Sutorbilt line of blowers and vacuum pumps earned the name “Legend.”• Backed by one of the largest distributor networks in the industry
• Every Sutorbilt Legend blower/vacuum pump is built under rigid ISO 9001:2000 quality standards
• Each Legend is individually tested to meet rigorous performance specifications
• Requested by leading Original Equipment Manufacturers (OEMs) worldwide for a wide range of applications, due to the ability to customize the Legend to their specifications while meeting strict performance requirements
• A Legend is at the heart of an ever-expanding variety of air solutions working every minute of every day around the globe
• Available in 20 sizes with 4 different configurations
• The Legend Series delivers
– Pressure to 15 psig– Vacuum to 16" Hg– Flows to 3,015 scfm
3
Proven Performance. Global Applications. Local Support.
Quiet Operation
The sound data shown below compares the Legend (red) and a comparably sized blower (green) operating at 3,275 rpm and 12 psig.
• Improved blower design reduces the sound pressure output of the Legend blower
• Typical reduction is 3 dBA which represents 50% less noise than the competition
Superior Local Sales and Service
• Extensive network of authorized Gardner Denver/Sutorbilt distributors
• Offers the most convenient local sales and service support in the industry
• Factory trained professionals are experts in blower/vacuum pump technology
• Providing system installation guidance, troubleshooting and optimization recommendations for new or existing applications
Even a “Legendary” Warranty
Every Sutorbilt Legend Series blower/vacuum pump is covered by a “Legendary” warranty: 24 months from the date of shipment or 18 months from the date of installation.
Industry ApplicationAquaculture Aeration
Cement & Lime Fluidization & Conveying
Chemical Vacuum Processing & Conveying
Coal Bed/Landfill Methane Gas Recovery
Dairy Automated Milking
Dry Bulk Hauling Trailer Unloading & Aeration
Environmental Services
Sewer Cleaning & Portable Restroom Services
Industrial Material Vacuuming
Milling & Baking Blending & Conveying
Oil & Gas Gas Collection & Sparging
Power Generation Fly Ash Conveying & Aeration
Process Gas Gas Boosting
Pulp & Paper Chip Conveying & Process Vacuum
Resin & Plastic Processing & Conveying
Soil Remediation Vacuum Extraction & Sparging
Vacuum Excavation Potholing & Slurry Recovery
Wastewater Aeration & Backwashing
The above table illustrates industries which depend upon the Sutorbilt® Legend® to deliver clean, oil-free air to a wide range of global applications.
100
90
80
70
60
50
SUTORBILT LEGEND
NO
ISE
LEVE
L (d
Ba)
COMPARABLE UNIT
FREQUENCY (Hz)
63 125 250 500 1000 2000 4000 8000
Legendary Design Features
4
1 High-strength impeller case is heavily ribbed and machined from a single piece of cast iron and features oversized dowel pins for precise mounting and alignment of head plates.
These features result in reduced noise and more stable, vibration-free operation.
2 Head plates, machined from cast iron, are ground on the interior surface to precise operating tolerances. Bearing fits are machined into head plates to assure exact bearing positioning.
This ensures accurate, fixed-dimension clearances through all blower operating conditions and temperature ranges.
3 Impellers are machined from cast iron to an exact profile and are permanently fastened to steel shafts. They are dynamically balanced for smooth operation in any assembled position.
This provides extra strength and rigidity to handle continuous maximum loads without fatigue or deflection.
1
2
3
4
25
6
7 7
8
9
2MP LHC 3MP RHC 4LVP BHC 5MP RHC
5
4 Anti-friction bearings are used exclusively. Smaller models are fitted with single-row ball bearings and cylindrical roller bearings; large models have double-row ball bearings and spherical roller bearings.
Optimum bearing selection provides longer blower life and added overhung shaft load capacity.
5 Timing gears, precision machined from alloy steel forgings, are permanently pinned to the shafts.
This assures non-slip timing even under the most strenuous loading conditions.
6 High temperature Viton® oil seals.
These maximize the seal life in continuous, severe-duty applications to provide leak-free operation.
7Flex-Mount™ design is adaptable to either vertical or horizontal installation.
The feet are precisely machined and match the footprints of many competitive units.
8 Timing gears and gear end bearings are splash lubricated utilizing an abundant oil reservoir. A graphite gasketed, oil-tight housing encloses the timing gears. Drive end bearings are grease lubricated through fittings. Lip-type seals prevent oil and grease from entering the impeller chamber.
Superior gear and bearing lubrication is assured at all operating conditions with minimal maintenance.
9 High strength steel drive shaft is extended for V-belt drive or direct connection.
This feature provides greater blower durability and installation flexibility.
Available with Mechanical Gas SealsThe Legend design accommodates mechanical gas seals for critical gas applications with proven results based on a large installed base.
This field proven seal design allows trouble-free operation in critical gas applications.
1
2
3
4
25
6
7 7
8
9
6HVP BHC 7MVP BHC 8HVP BHC
The Sutorbilt Legend Design
6
Horizontal Configuration, Right Hand Drive
Horizontal Configuration, Left Hand Drive
Vertical Configuration, Bottom Hand Drive
Vertical Configuration, Top Hand Drive
TransferA constant volume of trapped air or gas is transferred around the cylinder to the discharge port.
DischargeA constant volume of air or gas is forced out through
the discharge port.inTakeA constant volume of air or gas is drawn into the cylinder by the action of the turning impellers.
The Sutorbilt PD Cycle• Two figure-eight impellers turn in opposite directions
within a machined housing
• Transferring a constant volume of air or gas from inlet to discharge with every rotation of the blower drive shaft
• No lubrication within the cylinder is required
• Rotating components are held in close tolerance do not contact each other
• Impeller positioning is maintained by precision timing gears affixed to each impeller shaft
• Gear and bearing lubrication occurs externally to the cylinder assuring clean, oil-free gas delivery under all operating conditions
Flex-Mount™ Design Provides Maximum Installation Versatility
• Flex-MountTM design allows the Legend application flexibility
• Creating interchange-ability on existing and new applications
• Compatible as replacements for most competitive installations
Photo A
Photo B
7
State-of-the-Art QualityGardner Denver’s Sutorbilt Legend blowers and vacuum pumps are engineered and manufactured under strict ISO 9001:2000 quality standards in our 330,000 square feet state-of-the-art facility in Sedalia, MO (photo below)
• Gardner Denver makes it a priority to invest in highly skilled people who take pride in producing quality products
• Our Flexible Machining System (FMS) assures consistent production of the highest quality Legend components
• Attention to detail is found throughout the manufacturing process such as utilizing advanced coordinate measuring equipment (photo A)
• Legend components are subjected to quality inspections before assembly
• Prior to shipment, every Legend is tested against rigid standards using our computer automated testing stations (photo B)
8 Sutorbilt Legend Pressure Performance Data
Low
Pr
ess
ur
e u
nit
sSI ZE
DIA. INLET& OUTLET
DISPL. CU. FT./REV.
RPM2 PSIG 3 PSIG 4 PSIG 5 PSIG 6 PSIG 7 PSIG
CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP
2LP2LVP 2"-S 0.035
2,8003,2503,5605,275
7691
102162
1.11.31.42.0
718697
157
1.61.82.02.8
678293
153
2.12.42.63.7
637989
149
2.52.93.24.6
597586
146
3.03.43.75.3
567283
143
3.54.04.36.1
3LP3LVP 2½"-S 0.104
1,7602,2652,7703,600
149202254341
1.92.42.93.7
142194247333
2.83.54.35.3
135188240327
3.74.75.57.1
130182235321
4.55.66.88.9
124177230316
5.26.78.2
10.6
120172225311
6.17.89.6
12.4
4LP4LVP 3"-S 0.170
1,7602,1902,6203,600
253326400566
3.03.74.45.8
243316389556
4.55.36.38.7
234307381547
5.77.18.4
11.6
227300373539
7.18.8
10.614.5
220293366533
8.510.612.717.4
213286360526
9.912.414.820.3
5LP5LVP 4"-S 0.350
1,5001,7602,1002,850
463554673936
5.25.87.09.5
449540659922
7.58.8
10.514.2
438529648910
10.011.713.918.9
427518637900
12.414.617.423.6
418509628890
14.917.520.928.4
409500619882
17.420.424.433.1
6LP6LVP 6"-F 0.718
1,1701,7601,9302,350
7391,1621,2841,586
8.012.013.116.0
7161,1391,2611,563
11.918.019.724.0
6971,1201,2421,544
15.924.026.332.0
6801,1031,2251,527
19.929.932.840.0
6641,0881,2101,512
23.935.939.448.0
6501,0741,1961,497
27.941.946.056.0
7LP7LVP 8"-F 1.200
1,1701,4651,7602,050
1,2771,6311,9852,333
13.316.720.023.3
1,2481,6021,9562,304
20.025.030.035.0
1,2241,5781,9322,280
16.633.340.046.6
1,2031,5571,9112,259
33.341.750.158.3
1,1841,5381,8922,240
39.950.060.170.0
8LP8LVP 10"-F 1.740
8801,1701,3751,800
1,3661,8712,2282,967
14.519.322.729.7
1,3291,8342,1912,930
21.828.934.044.5
1,2981,8032,1592,899
29.038.645.459.4
1,2711,7752,1322,871
36.348.256.774.2
1,2461,7502,1072,847
43.557.968.089.1
Med
iuM
Pr
ess
ur
e u
nit
s
SIZE DIA.INLET& OUTLET
DISPL.CU. FT./REV. RPM
7 PSIG 9 PSIG 10 PSIG 12 PSIG 13 PSIG 14 PSIGCFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP
2MP2MVP 1"-S 0.017
2,8003,2503,5605,275
25333867
1.71.92.13.1
22303564
2.12.52.73.9
283463
2.73.04.4 60 5.1
3MP3MVP 2"-S 0.060
1,7602,2652,7703,600
6495
125175
3.64.65.57.2
5989
119169
4.65.87.19.2
87117167
6.47.9
10.2112162
9.512.3
4MP4MVP 2½"-S 0.117
1,7602,1902,6203,600
144194245359
6.88.5
10.214.0
136186236351
8.810.913.118.0
132182233347
9.812.114.520.0
5MP5MVP 4"-S 0.210
1,5001,7602,1002,850
237292363521
10.512.314.619.9
227281353510
13.415.818.825.5
222277348506
14.917.520.928.4
213268339497
17.921.025.134.0
209263335493
19.422.827.236.9
6MP6MVP 5"-S 0.383
1,1701,7601,9302,350
332558622784
14.922.424.529.9
316542607768
19.128.831.538.4
309535600761
21.232.035.042.7
296522587748
25.538.342.051.2
289515580741
27.641.545.555.5
283509574735
29.744.749.159.7
7MP7MVP 6"-F 0.733
1,1701,4651,7602,050
693909
1,1251,338
28.535.642.849.9
671887
1,1031,316
36.645.855.064.1
661877
1,0931,306
40.750.961.171.2
8MP8MVP 8"-F 1.040
8801,1701,3751,800
7091,0111,2241,666
30.440.447.462.1
681983
1,1961,638
39.051.961.079.9
669970
1,1831,625
43.457.767.888.7
Hig
H P
res
su
re
un
its
SIZEDIA. INLET& OUTLET
DISPL. CU.FT./REV.
RPM7 PSIG 8 PSIG 9 PSIG 11 PSIG 13 PSIG 15 PSIG
CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP
3HP3HVP 1¼"-S 0.045
1,7602,2652,7703,600
466991
129
2.63.44.15.4
446689
126
3.03.94.76.1
416487
124
3.44.35.36.9
6083
120
5.36.58.4 117 10.0 113 11.5
4HP4HVP 1½"-S 0.069
1,7602,1902,6203,600
80110139207
4.05.06.08.2
77107137204
4.65.76.99.4
74104134201
5.26.47.7
10.6
99129196
7.99.4
13.0124192
11.115.3 188 17.7
5HP5HVP 2½"-S 0.140
1,5001,7602,1002,850
154191238343
7.08.29.8
13.2
151187235340
8.09.3
11.115.1
147183231336
9.010.512.517.0
140177224329
10.912.815.320.8
171218323
15.218.124.6
165213318
17.520.928.4
6HP6HVP 3"-S 0.227
1,1701,7601,9302,350
188321360455
8.813.314.517.7
182316355450
10.115.116.620.2
177311350445
11.317.018.722.8
168302340436
13.820.822.827.8
159293332427
16.424.627.032.9
285324419
28.431.137.9
7HP7HVP 4"-S 0.367
1,1701,4651,7602,050
332441549655
14.217.821.425.0
326434542649
16.320.424.528.5
319428536642
18.322.927.632.1
308416524631
22.428.033.739.2
297405514620
26.533.139.846.4
287396504610
30.538.245.953.5
8HP8HVP 4"-S 0.566
8801,1701,3751,800
363528644884
16.522.025.833.8
354518634875
18.925.129.538.6
345509626866
21.228.333.243.5
329493609850
26.034.540.653.1
315479595835
30.740.848.062.8
301465581822
35.447.155.372.4
Performance based on standard conditions: Sea Level,14.7 PSIA, 68˚F Inlet Temperature, 36% Relative Humidity. For performance with gases other than air or at non-standard conditions, contact your Authorized Sutorbilt representative. S=Screwed connections std. NPT. F=flange connections. Intake and outlet pipe connections are same type and size.
9
Low
Vac
uu
M u
nit
sSIZE DIA. INLET
& OUTLETDISPL. CU.
FT./REV. RPM2 "Hg 4 "Hg 8 "Hg 10 "Hg 12 "Hg 14 "Hg
CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP
2LP2LVP 2"-S 0.035
2,8003,2503,5604,1655,275
8298
108130168
0.70.70.80.91.1
7490
101122161
1.11.31.41.61.9
617788
109148
2.02.32.52.93.6
557182
103142
2.52.83.13.64.5
647596
135
3.43.74.35.2 128 6.0
3LP3LVP 2½"-S 0.104
1,7602,2652,7703,600
158211264350
1.11.31.51.9
147200252338
1.92.42.93.7
128180233319
3.64.65.47.0
118171223309
4.55.56.78.7
108160213299
5.16.68.1
10.5 288 12.2
4LP4LVP 3"-S 0.170
1,7602,1902,6203,600
266339412579
1.61.92.33.1
250323396563
3.03.74.35.7
224297370537
5.66.98.3
11.4
211284357524
7.08.7
10.414.3
197270343510
8.410.412.417.1
329495
14.520.0
5LP5LVP 4"-S 0.350
1,5001,7602,1002,850
480571690953
2.63.13.64.8
459550669932
5.15.76.89.3
424515634896
9.811.513.718.6
406497616879
12.214.317.123.2
388479598860
14.717.220.527.9
459578840
20.124.032.5
6LP6LVP 6"-F 0.718
1,1701,7601,9302,350
7661,1901,3121,614
4.15.96.57.9
7321,1151,2781,579
7.811.812.915.7
6741,0971,2191,521
15.723.525.831.4
6451,0681,1911,492
19.629.432.339.3
6151,0381,1601,462
23.535.338.747.2
1,0051,1271,429
41.245.255.0
7LP7LVP 8"-F 1.200
1,1701,4651,7602,050
1,3121,6662,0202,368
6.58.29.8
11.5
1,2681,6221,9762,324
13.116.419.722.9
1,1951,5491,9032,251
26.232.839.345.8
1,1591,5131,8672,215
32.740.949.257.3
1,1211,4751,8292,177
39.249.159.068.7
8LP8LVP 10"-F 1.740
8801,1701,3751,800
1,4111,9162,2733,012
7.19.5
11.114.6
1,3551,8602,2172,953
14.319.022.329.2
1,2611,7662,1222,862
28.537.944.658.4
1,2141,7192,0762,815
35.747.455.772.9
1,1651,6702,0262,765
42.856.966.987.6
Med
iuM
Vac
uu
M u
nit
s
SIZE DIA. INLET&OUTLET
DISPL. CU.FT./REV. RPM
6 "Hg 10 "Hg 12 "Hg 14 "Hg 15 "Hg 16 "HgCFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP
2MP2MVP 1"-S 0.017
2,8003,2503,5604,1655,275
3139445473
0.80.90.91.11.4
2432374867
1.21.41.51.72.2
344463
1.82.12.6
4059
2.43.0 57 3.2
3MP3MVP 2"-S 0.060
1,7602,2652,7703,600
76106136186
1.62.02.43.1
6393
124174
2.63.34.05.0
5787
117167
3.13.94.76.0
110160
5.47.0 156 7.5
4MP4MVP 2½"-S 0.117
1,7602,1902,6203,600
161211262376
3.03.74.45.9
142193243358
4.96.07.19.8
132183233348
5.87.28.6
11.8222337
10.013.7 331 14.7 325 15.7
5MP5MVP 4"-S 0.210
1,5001,7602,1002,850
258313384542
4.55.26.28.4
235290361519
7.38.6
10.313.9
223277349506
8.810.312.316.7
209264335493
10.312.114.419.5
328485
15.420.9 477 22.3
6MP6MVP 5"-S 0.383
1,1701,7601,9302,350
363589655815
6.39.4
10.312.6
328554619780
10.415.717.221.0
310536601762
12.518.820.725.2
290516581741
14.622.024.129.3
279505570731
15.723.525.831.4
267493558719
16.725.127.533.5
7MP7MVP 6"-F 0.733
1,1701,4651,7602,050
738954
1,1701,383
12.015.018.021.0
688904
1,1211,333
20.025.030.035.0
662878
1,0941,307
24.030.036.142.0
633850
1,0651,278
28.035.042.149.0
618834
1,0501,263
30.037.545.152.5
601817
1,0341,246
32.040.048.156.0
8MP8MVP 8"-F 1.040
8801,1701,3751,800
7651,0671,2801,722
12.817.020.026.2
7031,0051,2181,660
21.328.333.343.6
670972
1,1851,627
25.634.040.052.3
634936
1,1491,591
29.839.746.661.0
615917
1,1301,572
32.042.550.065.4
594896
1,1091,551
34.145.353.369.7
Hig
H V
acu
uM
un
its
SIZE DIA. INLET& OUTLET
DISPL. CU.FT./REV. RPM
6 "Hg 8 "Hg 12 "Hg 14 "Hg 15 "Hg 16 "HgCFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP
3HP3HVP 1¼"-S 0.045
1,7602,2652,7703,600
5578
100138
1.11.41.72.3
507395
133
1.51.92.33.0
406285
122
2.22.83.54.5
79117
4.15.3
76113
4.45.7 110 6.0
4HP4HVP 1½"-S 0.069
1,7602,1902,6203,600
91121151218
1.72.12.53.5
85115144212
2.32.83.44.6
72102132199
3.44.25.16.9
95124192
4.95.98.1
91120188
5.36.38.7 184 9.3
5HP5HVP 2½"-S 0.140
1,5001,7602,1002,850
170206254359
2.93.44.15.6
161198245350
3.94.65.57.4
144180228333
5.96.98.2
11.2
134171218323
6.88.09.6
13.0
165213318
8.610.314.0 312 14.9
6HP6HVP 3"-S 0.227
1,1701,7601,9302,350
209343381477
3.75.66.17.5
197331370165
4.87.48.29.9
173307345441
7.411.212.214.9
159293332427
8.713.014.317.4
152286325420
9.314.015.318.6
278317412
14.916.319.9
7HP7HVP 4"-S 0.367
1,1701,4651,7602,050
359467575682
6.07.59.0
10.5
344453561667
8.010.012.014.0
314422531637
12.015.018.121.0
297406514620
14.017.521.124.5
288396505611
15.018.822.626.3
278387495601
16.020.024.128.0
8HP8HVP 4"-S 0.566
8801,1701,3751,800
400564680921
7.09.3
10.914.2
380544660901
9.312.314.519.0
338502618859
13.918.521.728.5
315479595835
16.221.625.433.2
302466582823
17.423.127.235.6
453569809
24.729.038.0
Sutorbilt Legend Vacuum Performance Data
Horizontal ConfigurationsSIZE WT. CONN. A B C D E F G H J K L M N O P R S T U
2M 72 S 5 2 2 6 3⁄8 3 ¼ 3 ¾ 2 ¾ 7 9 ¼ 1 5 5⁄32 10 2¾ 115⁄16 111⁄163⁄16 .625 1⁄8
7⁄16
2L 86 S 7 3 2 6 3⁄8 3 ¼ 3 ¾ 2 ¾ 7 9 ¼ 2 6 5⁄32 12 4¾ 115⁄16 111⁄163⁄16 .625 1⁄8
7⁄16
3H 88 S 6 ¾ 2 11⁄16 2 7⁄8 7 ¾ 3 7⁄8 5 3 ½ 8 7⁄8 11¼ 1¼ 5 13⁄16 11 7⁄8 3 ½ 2 111⁄163⁄16 .750 ¼ ½ x ¾
3M 110 S 7 5⁄8 3 1⁄8 2 7⁄8 7 ¾ 3 7⁄8 5 3 ½ 8 7⁄8 11¼ 2 6 ¼ 12 ¾ 4 3⁄8 2 111⁄163⁄16 .750 ¼ ½ x ¾
3L 132 S 10 ¼ 4 7⁄16 2 7⁄8 7 ¾ 3 7⁄8 5 3 ½ 8 7⁄8 11¼ 2 ½ 7 9⁄16 15 3⁄8 7 2 111⁄163⁄16 .750 ¼ ½ x ¾
4H 138 S 7 ¼ 3 3 8 4 3⁄16 6 ¼ 4 10 7⁄16 12 3⁄8 1½ 6 7⁄8 13 ¾ 4 2 3⁄8 21⁄83⁄16 .875 3⁄8 ½ x ¾
4M 160 S 9 ½ 4 1⁄8 3 8 4 3⁄16 6 ¼ 4 10 7⁄16 12 3⁄8 2 ½ 8 16 6 ¼ 2 3⁄8 21⁄83⁄16 .875 3⁄8 ½ x ¾
4L 182 S 12 5 3⁄8 3 8 4 3⁄16 6 ¼ 4 10 7⁄16 12 3⁄8 3 9 ¼ 18 ½ 8 ¾ 2 3⁄8 21⁄83⁄16 .875 3⁄8 ½ x ¾
5H 210 S 8 ½ 3 ½ 3 ½ 9 5 3⁄16 7 5 12 3⁄16 15 3⁄8 2 ½ 8 3⁄16 17 3⁄16 4 7⁄8 2 ½ 2¼ ¼ 1.125 3⁄89⁄16 x ¾
5M 232 S 10 ½ 4 ½ 3 ½ 9 5 3⁄16 7 5 12 3⁄16 15 3⁄8 4 9 3⁄16 19 3⁄16 6 7⁄8 2 ½ 2¼ ¼ 1.125 3⁄89⁄16 x ¾
5L 306 S 14 ½ 6 ½ 3 ½ 9 5 3⁄16 7 5 12 3⁄16 15 3⁄8 4 113⁄16 23 3⁄16 10 7⁄8 2 ½ 2¼ ¼ 1.125 3⁄89⁄16 x ¾
6H 318 S 9 ¾ 3 15⁄16 4 11 6 8 ¾ 6 14 ¾ 18 3 9 3⁄16 19 1⁄8 5 ¾ 215⁄16 121⁄325⁄16 1.375 5⁄8 ¾ x 1
6M 366 S 13 5 9⁄16 4 11 6 3⁄16 8 ¾ 6 15 15⁄16 18 5 10 13⁄16 22 3⁄8 9 215⁄16 121⁄325⁄16 1.375 5⁄8 ¾ x 1
6L 538 F 20 9 1⁄16 4 11 7 ½ 8 ¾ 6 16 ¼ 18 6 14 5⁄16 29 3⁄8 16 215⁄16 121⁄325⁄16 1.375 5⁄8 ¾ x 1
7H 482 S 12 4 5⁄8 5 ½ 15 9 11⁄16 11 7 20 11⁄16 22 4 10 211⁄8 5 ¾ 3 3⁄16 2 7⁄83⁄8 1.562 ½ ¾ x 1
7M 638 F 17 ½ 7 3⁄8 5 ½ 15 8 ½ 11 7 19 ½ 22 6 12 ¾ 26 5⁄8 11¼ 3 3⁄16 2 7⁄83⁄8 1.562 ½ ¾ x 1
7L 770 F 24 ½ 10 7⁄8 5 ½ 15 8 ½ 11 7 19 ½ 22 8 16 ¼ 33 5⁄8 18 ¼ 3 3⁄16 2 7⁄83⁄8 1.562 ½ ¾ x 1
8H 736 S 13 ½ 5 ¾ 6 16 10 12 ½ 8 22 ½ 25 ¼ 4 1111⁄16 24 7¾ 3 7⁄8 3 3⁄83⁄8 1.750 ½ ¾ x 1
8M 938 F 19 8 ½ 6 16 10 12 ½ 8 22 ½ 25 ¼ 8 14 7⁄16 29 ½ 13 ¼ 3 7⁄8 3 3⁄83⁄8 1.750 ½ ¾ x 1
8L 1,170 F 27 12 ½ 6 16 10 12 ½ 8 22 ½ 25 ¼ 10 18 7⁄16 37 ½ 21¾ 37⁄8 3 3⁄83⁄8 1.750 ½ ¾ x 1
Sutorbilt Legend Dimensional Data
10
S=Threaded connections standard NPT. F=flange connections. Inlet and outlet connections are the same type and size. Dimensions are in inches. Weights are in pounds and include shipping cartons or pallets.
Vertical ConfigurationsSIZE WT. CONN. A B C D E F G H J K L M N O P R S T U
2MV 72 S 5 2 1½ 5 5⁄8 3 ½ 4 7⁄8 6 ¼ 9 ½ 6 ½ 1 5 5⁄32 10 2 ¾ 115⁄16 111⁄163⁄16 .625 1⁄8
7⁄16
2LV 86 S 7 3 1½ 5 5⁄8 3 ½ 4 7⁄8 6 ¼ 9 ½ 6 ½ 2 6 5⁄32 12 4¾ 115⁄16 111⁄163⁄16 .625 1⁄8
7⁄16
3HV 88 S 6 ¾ 211⁄16 2 ½ 6 ¾ 4 ½ 6 ¼ 8 117⁄8 7 ¾ 1¼ 5 13⁄16 11 7⁄8 3 ½ 2 111⁄163⁄16 .750 ¼ ½ x ¾
3MV 110 S 7 5⁄8 3 1⁄16 2 ½ 6 ¾ 4 ½ 6 ¼ 8 117⁄8 7 ¾ 2 6 ¼ 12 ¾ 4 3⁄8 2 111⁄163⁄16 .750 ¼ ½ x ¾
3LV 132 S 10 ¼ 4 3⁄8 2 ½ 6 ¾ 4 ½ 6 ¼ 8 117⁄8 7 ¾ 2 ½ 7 9⁄16 15 3⁄8 7 2 111⁄163⁄16 .750 ¼ ½ x ¾
4HV 138 S 7 ¼ 3 3 8 4 ½ 6 ½ 8 ½ 1211⁄16 8 3⁄8 1 ½ 6 7⁄8 13 ¾ 4 2 3⁄8 2 1⁄83⁄16 .875 3⁄8 ½ x ¾
4MV 160 S 9 ½ 4 1⁄8 3 8 4 ½ 6 ½ 8 ½ 1211⁄16 8 3⁄8 2 ½ 8 16 6 ¼ 2 3⁄8 2 1⁄83⁄16 .875 3⁄8 ½ x ¾
4LV 182 S 12 5 3⁄8 3 8 4 ½ 6 ½ 8 ½ 1211⁄16 8 3⁄8 3 9 ¼ 18 ½ 8 ¾ 2 3⁄8 2 1⁄83⁄16 .875 3⁄8 ½ x ¾
5HV 210 S 8 ½ 3 ½ 3 ½ 9 5 ½ 8 10 ½ 1511⁄16 10 3⁄8 2 ½ 8 3⁄16 17 3⁄16 4 7⁄8 2 ½ 2 ¼ ¼ 1.125 3⁄89⁄16 x ¾
5MV 232 S 10 ½ 4 ½ 3 ½ 9 5 ½ 8 10 ½ 1511⁄16 10 3⁄8 4 9 3⁄16 19 3⁄16 6 7⁄8 2 ½ 2 ¼ ¼ 1.125 3⁄89⁄16 x ¾
5LV 306 S 14 ½ 6 ½ 3 ½ 9 5 ½ 8 10 ½ 1511⁄16 10 3⁄8 4 113⁄16 23 3⁄16 10 7⁄8 2 ½ 2 ¼ ¼ 1.125 3⁄89⁄16 x ¾
6HV 318 S 9 ¾ 3 15⁄16 4 11 8 ¾ 11¾ 14¾ 20 ¾ 12 3 9 3⁄16 19 1⁄8 5 ¾ 215⁄16 121⁄325⁄16 1.375 5⁄8 ¾ x 1
6MV 366 S 13 5 9⁄16 4 11 8 ¾ 11¾ 14¾ 20 ¾ 12 3⁄8 5 1013⁄16 22 3⁄8 9 215⁄16 121⁄325⁄16 1.375 5⁄8 ¾ x 1
6LV 538 F 20 9 1⁄16 4 11 8 ¾ 11¾ 14¾ 20 ¾ 15 6 14 5⁄16 29 3⁄8 16 215⁄16 121⁄325⁄16 1.375 5⁄8 ¾ x 1
7HV 482 S 12 4 5⁄8 5 ½ 14 11 14 ½ 18 25 ½ 19 3⁄8 4 10 211⁄8 5 ¾ 3 3⁄16 2 7⁄83⁄8 1.562 ½ ¾ x 1
7MV 638 F 17½ 7 3⁄8 5 ½ 14 11 14 ½ 18 25 ½ 17 6 12 ¾ 26 5⁄8 11¼ 3 3⁄16 2 7⁄83⁄8 1.562 ½ ¾ x 1
7LV 770 F 24 ½ 10 7⁄8 5 ½ 14 11 14 ½ 18 25 ½ 17 8 16 ¼ 33 5⁄8 18 ¼ 3 3⁄16 2 7⁄83⁄8 1.562 ½ ¾ x 1
8HV 736 S 13 ½ 5 ¾ 6 16 12 ½ 16 ½ 20 ½ 29 1⁄8 20 4 1111⁄16 24 7 ¾ 3 7⁄8 3 3⁄83⁄8 1.750 ½ ¾ x 1
8MV 938 F 19 8 ½ 6 16 12 ½ 16 ½ 20 ½ 29 1⁄8 20 8 14 7⁄16 29 ½ 13 ¼ 3 7⁄8 3 3⁄83⁄8 1.750 ½ ¾ x 1
8LV 1,170 F 27 12 ½ 6 16 12 ½ 16 ½ 20 ½ 29 1⁄8 20 10 18 7⁄16 37 ½ 21¼ 3 7⁄8 3 3⁄83⁄8 1.750 ½ ¾ x 1
S=Threaded connections standard NPT. F=flange connections. Inlet and outlet connections are the same type and size. Dimensions are in inches. Weights are in pounds and include shipping cartons or pallets.
11
Member ©2007 Gardner Denver, Inc. Litho in U.S.A. PD-SB-L 1st Ed. 4/07
For additional information contact your local representative orGardner Denver, 1800 Gardner Expressway, Quincy, IL 62305
Customer Service Department Telephone: (800) 682-9868 FAX: (217) 221-8780
Sales and Service in all major cities.www.GardnerDenver.com [email protected]
Protect your Sutorbilt investment with AEON™ PD, the only lubricant specially formulated for all blowers in any environment
• 100% synthetic for matchless service life
• Retains its superior lubricating properties a minimum of four times longer than a premium grade mineral oil at most operating conditions
• Eliminates seasonal oil viscosity grade changes
• Superior lubrication in severe, high temperature applications
• Available from your local authorized Sutorbilt distributor in convenient sizes to meet your needs
• Food grade lubricant available
Retain your Sutorbilt advantage with Genuine Gardner Denver Replacement Parts
• Gardner Denver guarantees to supply the proper parts for your specific blower every time. Replacement parts incorporate the most recent design upgrades.
• All parts meet Gardner Denver original manufacturing specifications and tolerances for guaranteed fit and function.
• Pre-packaged overhaul kits with detailed service manuals are available from your local authorized Sutorbilt distributor.