Lefit Touch(L28H) 包装 用户手册 英文 AI CS6 160602 · Remove tracker from your wrist,...
Transcript of Lefit Touch(L28H) 包装 用户手册 英文 AI CS6 160602 · Remove tracker from your wrist,...
O W N E R ’ S M A N U A L
1
A B C D
E F
A:Tracker module
B:Interchangeable wristband
C:Wristband clasp
D:Owner’s Manual
E:Charging cradle
F:Micro-USB cable
Articles in the box
2
Charge your tracker1a. Connect the cradle
Position the charging cradle to connect to the back of your
tracker.
Tips: Pls charge your tracker 2 hours before first use.
3
1b. Make use they are on the right places.
Match the pins on the cradle with the contact points on your
tracker and snap them together.
Charge your tracker
4
Plug the small end of the Micro-USB cable into the cradle,
and connect the large end to a USB power source.
Battery status will shows in screen.
Plug it in
5
Getting the APPYour tracker must be linked to a smart phone (or tablet)
via the APP.
Please scan QR code to get the app.
iOS 7+,iPhone 4s+,iPad3+,
iPad Mini+,iPod touch5+ ,Bluetooth 4.0 BLE
Android 4.3 + ,Bluetooth 4.0 BLE
iOS Android
6
Link your tracker with your smartphone1. Turn on Bluetooth of your smartphone;
2. Turn on the App on your mobile device;
If you are a new member, please register. After inputting
your personal information, please click “Regist”;
Or log on existing account directly.
3. Make sure your tracker is nearby .
4. While your tracker displays pairing request follow:
Choose “√” to accept;choose “×” to refuse.
5. After the pairing process success, both your wrist and
smartphone will receive notifications.
Please repeat the process if failed.
If you want to pair the tracker with another account, you
should unpair with this account first.
7
Put on your trackerClosing the clasp
Wrap the band snugly around your wrist. Fasten the clasp
by pushing the clasp pegs through the holes in the band.
Wearing tips:
Add a few drops of water to the holes of the wristband to
make it easier to wear.
8
Changing wristbands1. Remove tracker from your wrist, and then pull one side of
the wristband over the screen’s frame to remove your tracker
module from the wristband
2. Fitting your tracker module back into the wristband works
the same way.
9
Wake up your trackerTap the touch screen of your tracker twice quickly to turn
on the screen. This action is called a Double-Tap.
The screen will automatically turn off after waiting a few
seconds.
In order to operate the tracker more effectively, we suggest
you use fingertip, not fingernail.
2:315/1PM
x2
10
Touch Screen OperationAll input to your tracker’s interface is given by simply touching
the surface of the screen with your finger.
1. Touch a screen like “back” or a button like “x” to select it.
2. Swipe Left or Swipe Right to change screens and navigate
menus. Move your finger horizontally across the surface of
the screen to swipe.
3. Touch and Hold your fingertip on any screen to quickly go
to the Apps Menu.
Tip: if you’re not sure what to do on a particular screen, try a
Swipe Left or a Swipe Right to change to a different screen.
11
Swipe Left and Swipe Right to change screens
Time, date
Step
Distance
Calorie
Apps Menu
Main menu
12
Clock Screen
On the left shows the time, “a” means morning, “p” means
afternoon; On the right side shows the date, mm/dd.
The tracker will shows same time and date with your
smartphone.
Please make sure your tracker has enough battery to avoid
invalid operation.
13
Steps, Calories, DistanceSteps
Distance
Calories
The tracker's main function is to track your daily activity.
You can view your activity data by tapping tracker’s touch
screen, also you can check from the app, which displays
your daily activity statistics and trends over time.Each screen
shows today’s current count for each type of activity tracking.
The bottom bar shows your current progress towards your
Daily Goal in the app.
Set your daily activity goals in the app.
14
Apps Menu
Swipe Left and Swipe Right to change screens.
All activity tracking and smartwatch features of your tracker
are accessible by touching the “APPS” icon to enter the
Apps Menu.
Swipe Left to the second screen of the Apps Menu.
Touch the Home icon to return to the Clock Screen.
15
Activity Menu
Touch the walking icon to enter the Activity
Swipe Left or Swipe Right to either endof the Activity Menu
to the “Back” screen.
Touch the “Back” screen to return to the Apps Menu.
Swipe Left and Swipe Right to change screens.
Step
Walking time
Distance
Calorie
Go Back
16
Sleep Mode
Exit Sleep Mode
Enter into Sleep mode
Sleep time
Touch the moon icon to enter the Sleep mode
Swipe Left and Swipe Right to change screens.
17
Setting Menu
Go Back
Factory Reset
Restart Device
Flip Screen
Info Menu
Battery Level
Touch “ the gear icon ” to enter the Setting Menu
Swipe Left and Swipe Right to change screens.
18
Battery Level
Tip: For best results, be sure to charge your tracker when
the battery level is below 20%.
Battery Level is the first screen of the Settings Menu.
19
INFO MenuThe INFO Menu displays technical information about your
tracker that a customer service agent can use to diagnose
issues .
The device ID can be checked by INFO Menu。
20
Flip ScreenThis feature can help you to choose a best display way
according to your habit.
How to Flip Screen
1. Enter the Settings Menu .
2. Swipe Left to Flip Screen.
3. Touch Flip Screen to enter the confirmation screen.
4. Touch the check-mark button to confirm Flip Screen,
Touch the “x” button to cancel.
21
RestartRestart is a troubleshooting feature that resolves memory
issues, much like the restart button on a desktop computer.
No data is deleted when restarting your tracker.
How to Restart your tracker
1. Enter the Settings Menu .
2. Swipe Left to the Restart screen
3. Touch the Restart screen to enter the confirmation screen
4. Touch the check-mark button to con rm Restart, Touch
the “x” button to cancel.
22
Factory ResetThe Factory Reset feature returns your tracker to its initial
pre-setup state, unlinking your tracker from your smartphone,
and erasing all data including activity and stored Notifications.
How to Factory Reset your tracker
1. Enter the Settings Menu .
2. Swipe Left to the Factory Reset screen.
3. Touch the Factory Reset screen to enter the
confirmation screen.
4. Touch the check-mark button to confirm
Factory Reset, Touch the “x” button to cancel.
23
Alarms
Swipe to read received SMS, you can read at most 3
messages once, and each message you can read 2 pages.
First page is message sender. Second and Third are
message content. If the message more than 2 pages, the
rest of contect will be instead of apostrophe.
Tips: Swipe screen to check more than 1 alarm.
SMS Alarm
Email Alarms
Missed call Alarms
Swipe to read missed call information, at most 5 missed call
could be checked at once.
24
Social contact message reminding
Calendar matter reminding
Bluetooth disconnection reminding
The tracker can display calls, missed calls, messages,
emails, social contact media activities, calendar matters and
anti-loss notices. Open the App, click “setup>notice”, and
select the notice you want the watch to receive. If you want
to stop using some notices, please slide the radio button to
the left and click the bracelet screen to neglect the notice,
otherwise, the notice will show up againnext time when the
screen is activated.
Caller No. display (only telephone No.)
Notification
25
Reminder
Click the “remind” option of the App to adddaily reminding.
You can set 6 kinds of daily reminding for the most, and you
may select the provision type, preference time and date.
Your bracelet will vibrate slightly and display the
corresponding reminding icon to remind you. Click the
bracelet to neglect the reminding.
Activity Sleep
Eat
MedicineWake up
Custom Reminder
26
Click the “target” option of the App to set the target of daily
walking step, walking distance, burnt calorie and sleep
hours. Click the synchronization button on the upper right to
save your target setting. When the target is reached, your
watch will vibrate slightly and display the target completion
icon.
Target
27
TroubleshootingData synchronization failure by the APP1. Please check if the network and Bluetooth of your mobile phone have been turned on. The network and Bluetooth of your mobile phone need to be turned on at the same time for data synchronization. 2. Please check if the bracelet is near the mobile phone and the connection distance is within 5 meters. 3. Please confirm the binding with your bracelet is successful.
Failure of bracelet binding by the APP1. Please check if the network and Bluetooth of your mobile phone have been turned on. The network and Bluetooth of your mobile phone need to be turned on at the same time for watch binding.2. Please check if the bracelet is near the mobile phone and the connection distance is within 5 meters. 3. Please check the bracelet has not bound with other accounts.
28
Supporting devices
iOSiPhone SE,iPhone 6s,iPhone 6,iPhone 5c,
iPhone 5s,iPhone 4s,iPad Mini, etc.
AndroidHTC One M9,HTC M8T,HTC D610t,
Samsung S6,Samsung Galaxy Note 4,
Samsung S5,Samsung Galaxy Note 3,
Samsung S4,Samsung Galaxy Note 2,
Samsung S3,Sony Xperia Z2,VIVO 3S,
LG G2,LG G3,HUAWEI P7,OPPO Find7,
Nexus 5,MOTO X,iSWAG MAGNET47, etc.
29
Size:Main body: 43.4mm*17.9mm*9.3mm
band: 247mm* 18mm*3
Material:TPU(band)
Display:OLED,0.91”
Vibration motor:supportive
Battery:55mAh
Time display:RTC+Time synchronization
Weight: about 18g;
Waterproof rate:IP67
Upgrade:OTA
Product specifications
30
Remarks
Please charge the device promptly when it shows low
power, and please use our standard charging clip.
Please do not leave the device in damp environment
or expose it to liquid when charging.
Please do not expose the device to extreme
temperature.
Please do not expose the device to direct sunlight
place for long duration.
Please do not place the device in vicinity of a fire.
Please avoid contact between the device and any
sharp object.
Please do not misuse the device, including but not
limited to, falling, dismantling, dissembling, pressing,
puncturing, baking, burning, etc.
Please do not clean the device with an abrasive
cleaner.
Please keep it out of reach of infants as small parts
may cause choking.