LEF-3808 Spinning Room - manual - Landlord FX · 2018. 11. 16. · SPINNING ROOM If the Landlord...
1
SPINNING ROOM If the Landlord has called time on your evening, plug into this pedal until your room starts spinning with an incredible selection of modulation effects! The Landlord FX Spinning Room packs no less than 11 modulation effects into a mini chassis along with True Bypass switching! Don’t stop until you have double vision! 1.TRUE BYPASS FOOTSWITCH: Press once – Begin pouring (engage the effect). Press twice - Cycle between standard mode and stored parameter. Press & hold - Store the current parameter settings in pedal’s memory. 2. LED INDICATOR LIGHT: Green – standard mode. Effect is ON. Red – Stored setting mode. Effect is ON and pedal’s controls have no function. 3. MOD SELECTOR: There are eleven models. Adjust the knob to select from the following: CHORUS (I), CHORUS (II), FLANGER (I), FLANGER (II) JETTER, VIBE (I), VIBE (2), PHASER, TREM (I), TREM (II), FILTER. 4. DEPTH: Determine how intensely the room spins. 5. SPEED: Choose how quickly your vision blurs. 6. LEVEL: See how long you can stand up. 7. INPUT: Hold on here. 8. OUTPUT: Let go here. 9. POWER ADAPTER INPUT: Use a centre negative 9V DC adapter to supply juice to the pedal are begin the mind modulation. Operating Instructions Specifications • Input: 1/4″Monaural Jack (Impedance: 470K Ohms) • Output: 1/4″Monaural Jack (Impedance: 100 Ohms) • Power Supply: DC 9V (Plug polarity is positive on the barrel and negative in the centre ) • Working Current: 100mA • Dimensions: 95(D)*45(W)*48(H)mm • Weight: 273g (With box)
Transcript of LEF-3808 Spinning Room - manual - Landlord FX · 2018. 11. 16. · SPINNING ROOM If the Landlord...
SPINNING ROOM
If the Landlord has called time on your evening, plug into this pedal until your room starts spinning with an incredible selection of modulation effects! The Landlord FX Spinning Room packs no less than 11 modulation effects
into a mini chassis along with True Bypass switching! Don’t stop until you have double vision!
1.TRUE BYPASS FOOTSWITCH: Press once – Begin pouring (engage the effect).Press twice - Cycle between standard mode and stored parameter.Press & hold - Store the current parameter settings in pedal’s memory.
2. LED INDICATOR LIGHT: Green – standard mode. Effect is ON.Red – Stored setting mode. Effect is ON and pedal’s controls have no function.
3. MOD SELECTOR: There are eleven models. Adjust the knob to select from the following: CHORUS (I), CHORUS (II), FLANGER (I), FLANGER (II) JETTER, VIBE (I), VIBE (2), PHASER, TREM (I), TREM (II), FILTER.
4. DEPTH: Determine how intensely the room spins.
5. SPEED: Choose how quickly your vision blurs.
6. LEVEL: See how long you can stand up.
7. INPUT: Hold on here.
8. OUTPUT: Let go here.
9. POWER ADAPTER INPUT: Use a centre negative 9V DC adapter to supply juice to the pedal are begin the mind modulation.
Operating Instructions
Specifications
• Input: 1/4″Monaural Jack (Impedance: 470K Ohms)• Output: 1/4″Monaural Jack (Impedance: 100 Ohms)• Power Supply: DC 9V (Plug polarity is positive on the barrel and negative in the centre )• Working Current: 100mA• Dimensions: 95(D)*45(W)*48(H)mm• Weight: 273g (With box)
