LED T8 TUBE LIGHT - irp-cdn.multiscreensite.com · LED T8 TUBE LIGHT • Standard T8 4-ft and 8-ft...
Transcript of LED T8 TUBE LIGHT - irp-cdn.multiscreensite.com · LED T8 TUBE LIGHT • Standard T8 4-ft and 8-ft...
LED T8 TUBE LIGHT
• Standard T8 4-ft and 8-ft tubes.
• 18W/36W lights, up to 90% energy saving.
• Wide range input design, 100~277 VAC.
• Environmental friendly, no lead, no mercury.
• Long lifespan, up to 50,000 hours.
• G13/Fa8 base, fast & easy installation.
• UL (E472276), *DLC 4.0. *DLC for 4-ft LED tube lights only.
4-FT Product Dimension (in mm)
4-FT Product Specification
Item NO. CCT Voltage Wattage Lumen Luminous Efficiency
Beam Angle
T8-4-18-3000K (BDT4SUA-18WB-3000)
3000K 100~277VAC 20W 2400 lm 120 lm/W 120°
T8-4-18-5000K (BDT4SUA-18WB-5000)
5000K 100~277VAC 20W 2400 lm 120 lm/W 120°
T8-4-18-5000K-F (BDT4SUA-18WB-5000)
5000K 100~277VAC 20W 2500 lm 125 lm/W 120°
T8-4-18-6000K (BDT4SUA-18WB-6000)
6000K 100~277VAC 20W 2500 lm 125 lm/W 120°
Other Technical Data
Input Voltage 100~277 VAC
Input Current (@120VAC) 180 mA
Input Frequency 47/63 Hz
Wattage 20W ± 1W
CRI ≥80 Ra
Beam Angle 120°
Power Factor ≥0.9
Materials Aluminum & PC cover*
Working Humidity 25~90 %RH
Working Temp. -20°C~+45°C
Storage Temp. -25°C~+65°C
LED Chip 2835
Dimming NO
* The default cover is clear, with Frosted cover (-F) optional for T8-4-18-5000K.
8-FT Product Dimension (in mm)
8-FT Product Specification
Item NO. CCT Voltage Wattage Lumen Luminous Efficiency
Beam Angle
T8-8-36-5000K-F (BDT88FUA-36WB-S50F)
5000K 100~277VAC 36W 4320 lm 120 lm/W 120°
T8-8-36-6000K (BDT88FUA-36WB-S60F)
6000K 100~277VAC 36W 4320 lm 120 lm/W 120°
Other Technical Data
Input Voltage 100~277 VAC
Input Current 350 mA
Input Frequency 47/63 Hz
Wattage 36W ± 2W
CRI ≥80 Ra
Beam Angle 120°
Power Factor ≥0.9
Materials Aluminum & PC cover*
Working Humidity 25~90 %RH
Working Temp. -20°C~+45°C
Storage Temp. -25°C~+65°C
LED Chip 2835
Dimming NO
* The default cover is clear, with Frosted cover (-F) optional for T8-8-36-5000K-F.
New Installation: T8-4ft, Single-end Wiring (no ballast)
New Installation: T8-4ft, Double-end Wiring (no ballast)
Direct Replacement: T8-4ft, Electronic Ballast
Replacement: T8-4ft, Inductive Ballast with Starter
(Pre-heat Luminaire)
Remove inductive ballast and starter! Rewire as following !
New Installation: T8-8ft, Single-end Wiring (no ballast)
Direct Replacement: Electronic Ballast