LED Rock Light Kit Installation Instructions Covers Part #8897
1
TRAXXAS.com Traxxas, 6250 Traxxas Way, McKinney, TX 75070, Phone: 972-549-3000, Fax: 972-549-3011, e-mail: [email protected] HKC19035-R02 Rev 191015 Covers Part #8897 LED Rock Light Kit Installation Instructions FRONT TOP-DOWN VIEW to LED Lighting Module Rock Light Wiring (for 6X6) 1 2 Rock Light Wiring (part #8026, sold separately) Note: LED rock light kit (part #8026X, sold separately) is required for a complete set of rock lights. Installation of the LED lighting module (part #8028, also sold separately) is required to provide power to the LED lights. Installation: 1. Install the LED light kit; refer to the Wiring Diagram (Fig. 1). The rock lights install as an assembly using the same hardware as the original assembly. Do not overtighten the screws that fasten the rock lights to the inner fenders. Hand tighten these screws. 2. Use zip ties to secure the wiring to the body in the locations provided. 3. Plug the LED harness connector into the LED lighting module. Kit Contents: • LED rock light harness assembly • Zip ties (3) Fig. 1 Wiring Diagram
Transcript of LED Rock Light Kit Installation Instructions Covers Part #8897
TRAXXAS.comTraxxas, 6250 Traxxas Way, McKinney, TX 75070, Phone: 972-549-3000, Fax: 972-549-3011, e-mail: [email protected]
HKC19035-R02 Rev 191015
Covers Part #8897LED Rock Light Kit Installation Instructions
FRONTTOP-DOWN VIEW
to LEDLighting Module
Rock Light Wiring (for 6X6)
1
2
Rock Light Wiring (part #8026, sold separately)
Note: LED rock light kit (part #8026X, sold separately) is required for a complete set of rock lights. Installation of the LED lighting module (part #8028, also sold separately) is required to provide power to the LED lights.
Installation:
1. Install the LED light kit; refer to the Wiring Diagram (Fig. 1). The rock lights install as an assembly using the same hardware as the original assembly. Do not overtighten the screws that fasten the rock lights to the inner fenders. Hand tighten these screws.
2. Use zip ties to secure the wiring to the body in the locations provided.
3. Plug the LED harness connector into the LED lighting module.
Kit Contents:• LED rock light harness assembly• Zip ties (3)
Fig. 1Wiring Diagram
