LED Recessed Lay-In Retrofit -...
2
TM TM Innovave Design for the Built Environment TYPE MODEL NO. DATE PROJECT NAME phone: 267.613.6110, email: [email protected] www.lumenopx.com Features and Benefits • Upgrades most fluorescent troffer and parabolic recessed in-lays to LED • Tool-less liſt and shiſt installaon system from below the ceiling rests on T-bar grid system • Provides up to 90% in energy savings allowing the lowest life cycle • Proprietary one-piece fluted lens provides a contemporary upscale look with exceponal light distribuon without pixilaon for smooth, even luminance • Aluminum frame, mitered and beveled in san anodized finish for a contoured nested fit and architectural styling • Excellent color rendering with CRI >80 • Lightweight aluminum housing for easy installaon, corrosion resistance and superior thermal management • Color consistency less than three McAdams Ellipse ensuring very lile deviaon • Made in the USA of US and imported parts • DLC listed except for 2700K opon MECHANICAL Housing: Design engineered to enable tool-less installaon within a pre-exisng troffer mounted in a 15/16” T-bar type grid system. Constructed of die-formed sheet aluminum and extruded aluminum alloy. Finish of housing is post-painted high reflectance textured white powder coat paint. Extruded aluminum frame is san anodized. Heavy gauge die-formed steel hinge fabricated and mechanically fastened to frame. Lens/Diffuser: Co-extruded acrylic with an opaque center secon, fluted and 100% frosted DF. Opcally designed to provide exceponal light distribuon and is designed to provide luminous flux to walls, vercal surfaces and horizontal surfaces. ELECTRICAL LED Light Engine: High efficacy, long-life LED modules provide excellent illuminaon both qualitavely and quantavely. Rated to deliver L85 performance for >50,000 hours. Excellent color rendering with >80 CRI. LED Driver: Available with a variety of dimming opons. (See ordering key got details.) WARRANTY 10 year limited warranty on luminaire. Pass through warranties on components when used in accordance with manufacturing guidelines. See www.lumenopx.com for details. B A END VIEW Width (A) Height (B) Length (C) 2x2 23.75" 2.90" 23.00" 2x4 23.75" 2.90" 47.00" TECHNICAL DATA 2x2 2x4 LUMEN PACKAGE 2000 2700 3600 3200 4200 5100 6100 7400 NOMINAL WATTAGE 19 24 39 29 38 50 65 79 EFFICACY (LM/W) 106 113 93 111 111 95 95 95 CRI >80 >80 >80 >80 >80 >80 >80 >80 COLOR CONSISTENCY <3 <3 <3 <3 <3 <3 <3 <3 INPUT FREQUENCY 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz POWER FACTOR >0.99 >0.99 >0.99 >0.99 >0.99 >0.99 >0.99 >0.99 LUMEN MAINTENANCE <85 <85 <85 <85 <85 <85 <85 <85 THD <10% <10% <10% <10% <10% <10% <10% <10% A C 2x4 TOP VIEW 2x2 TOP VIEW A C DIMENSIONS & FIXTURE CONFIGURATIONS LABELS & LISTINGS LER Recessed Lay-Ins LED Recessed Lay-In Retrofit 2x2, 2x4 ©2016 LumenOptix INC 10.03.17 Doc # 195-100019-000
Transcript of LED Recessed Lay-In Retrofit -...
TM
TMInnova�ve Design for the Built Environment
TYPE MODEL NO.
DATE PROJECT NAME
phone: 267.613.6110, email: [email protected]
Features and Benefits• Upgrades most fluorescent troffer and parabolic recessed in-lays to LED• Tool-less lift and shift installation system from below the ceiling rests on T-bar
grid system• Provides up to 90% in energy savings allowing the lowest life cycle• Proprietary one-piece fluted lens provides a contemporary upscale look with
exceptional light distribution without pixilation for smooth, even luminance• Aluminum frame, mitered and beveled in satin anodized finish for a contoured
nested fit and architectural styling• Excellent color rendering with CRI >80• Lightweight aluminum housing for easy installation, corrosion resistance and
superior thermal management• Color consistency less than three McAdams Ellipse ensuring very little deviation• Made in the USA of US and imported parts• DLC listed except for 2700K option
MECHANICALHousing: Design engineered to enable tool-less installation within a pre-existing troffer mounted in a 15/16” T-bar type grid system. Constructed of die-formed sheet aluminum and extruded aluminum alloy. Finish of housing is post-painted high reflectance textured white powder coat paint. Extruded aluminum frame is satin anodized. Heavy gauge die-formed steel hinge fabricated and mechanically fastened to frame.Lens/Diffuser: Co-extruded acrylic with an opaque center section, fluted and 100% frosted DF. Optically designed to provide exceptional light distribution and is designed to provide luminous flux to walls, vertical surfaces and horizontal surfaces.
ELECTRICALLED Light Engine: High efficacy, long-life LED modules provide excellent illumination both qualitatively and quantitatively. Rated to deliver L85 performance for >50,000 hours. Excellent color rendering with >80 CRI.
LED Driver: Available with a variety of dimming options. (See ordering key got details.)
WARRANTY10 year limited warranty on luminaire. Pass through warranties on components when used in accordance with manufacturing guidelines. See www.lumenoptix.com for details.
BA
END VIEW
Width (A)
Height (B)
Length (C)
2x2 23.75" 2.90" 23.00"
2x4 23.75" 2.90" 47.00"
TECHNICAL DATA2x2 2x4
LUMEN PACKAGE 2000 2700 3600 3200 4200 5100 6100 7400NOMINAL WATTAGE 19 24 39 29 38 50 65 79EFFICACY (LM/W) 106 113 93 111 111 95 95 95CRI >80 >80 >80 >80 >80 >80 >80 >80COLOR CONSISTENCY <3 <3 <3 <3 <3 <3 <3 <3INPUT FREQUENCY 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 HzPOWER FACTOR >0.99 >0.99 >0.99 >0.99 >0.99 >0.99 >0.99 >0.99LUMEN MAINTENANCE <85 <85 <85 <85 <85 <85 <85 <85THD <10% <10% <10% <10% <10% <10% <10% <10%
A
C
2x4 TOP VIEW 2x2 TOP VIEW
A
C
DIMENSIONS & FIXTURE CONFIGURATIONS
LABELS & LISTINGS
LERRecessed Lay-Ins
LED Recessed Lay-In Retrofit
2x2, 2x4
©2016 LumenOptix INC 10.03.17
Doc # 195-100019-000
MODEL NUMBER / ORDERING KEY
LER - - - - -
SERIES SIZE NOMINAL LUMENS CRI & COLOR TEMP. FRAME COLOR DIMMING
LERLED Recessed Lay-In Retrofit
222x2
242x4
2x2202000 lumens
302700 lumens
403600 lumens
2x4303200 lumens
404200 lumens
505100 lumens
706100 lumens
807400 lumens
80272700K, 80CRI †
80303000K, 80CRI
80353500K, 80CRI
80404000K, 80CRI
80505000K, 80CRI
(Blank or FX) Clear Anodized
FWWhite (Painted)
FBBlack (Painted)
(Blank or DUX)Non dimming (120V-277V)
DU10-10V dimming (120V-277V)
DU5Lutron® 3 wire dimming (120V-277V)
DU6Lutron® EcoSystem dimming (120V-277V)
D132 wire leading edge dimming (120V)
-
OPTIONS (Pre-installed when specified)EMERGENCY LIGHTING OTHER
(Blank or EBXX)No emergency battery back-up installed
EB02Emergency battery back-up
(Blank or SXX)No option included
S02Surge Protector
For other voltages and dimming options, consult factory.
www.lumenoptix.com phone: 1.800.671.6799, email: [email protected]
For custom colors, consult factory.
† Not DLC listed
Product specifications subject to change without notice. For the most current spec sheet visit our website www.lumenoptix.com
LERRecessed Lay-Ins
LED Recessed Lay-In Retrofit
2x2, 2x4
©2016 LumenOptix INC 10.04.2016
Doc # 195-100019-000
![Sottile 2D Rv2a - Microsoft · 2014. 7. 10. · [sō-tee-lay] Sottile 2D Introducing Sottile [sō-tee-lay] 2D, a new fully luminous architectural recessed luminaire by Nulite. This](https://static.fdocuments.net/doc/165x107/60fa66db43860e5a9e023803/sottile-2d-rv2a-microsoft-2014-7-10-s-tee-lay-sottile-2d-introducing.jpg)
