LeD 2012 Catalog

2012 Product Catalog

L.E.D. is a trademark of Light Emitting Design, Inc. © 2007 Light Emitting Design, Inc.

2541 N. Keystone St. Burbank, CA 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com

LM 120 Series LED Architectural Downlight

Benefits of LED Lighting

Surface Mount Cylinder

Product Information

5 YEAR LIMITED

WARRANTY

Light Emitting Design introduces the ultimate in

architectural lighting with the latest generation of LED

technology in the all-new 120 Series LED architectural

light module (LM120).

The 120 series architectural light surpasses all other

PAR38 LED light modules in the industry with its

advanced design and engineering. The LM120 light

module is designed for commercial and residential

lighting used for both indoor/outdoor applications. It fits

in most standard recessed IC or non IC housings for

retrofit or new construction.

By using proprietary technologies in the LM120, it is

able to obtain an unprecedented evenly uniform bright

light, while maximizing the life of the LED light module.

US PATENT #US2007/0062032A1; other US and

international patents pending.

•

•

•

•

•

•

•

•

•

•

Ultra low energy consumption resulting in a more green and sustainable environment

Up to 80% savings compared to filament bulbs or 60% compared to fluorescent tubes

Eliminates the costly repairs and replacements of bulbs or fluorescent tubes

Minimal environmental hazard upon disposal

Solid state electronics with no filaments or gas tubes

No harmful Ultra-Violet rays

Rugged-shatterproof & shock resistant

No ballasts or cold start problems

Increased safety with minimal risk of fire hazards

Direct replacement of incandescent Edison base bulbs and lamps


157mm6-3/16”

121mm4-3/4”

153mm6”

153mm6”

171mm6-3/4”

ceiling mount bracket

Light Module Models

Accessories Trim Color

LED Architectural Downlight

•

•

•

•

LM120ED-W E26/27 Standard Edison Socket / Dimmable / 3000K Warm White

LM120ED-N E26/27 Standard Edison Socket / Dimmable / 4000K Neutral White

LM120GD-W GU-24 Base Socket / Dimmable / 3000K Warm White

LM120GD-N GU-24 Base Socket / Dimmable / 4000K Neutral White

NOTE: All models are available with input voltage of 110V or 220V.

Please select desired input voltage when ordering.

•

•

•

•

White Trim

Mocha Trim

Black Trim

Gold Trim

•

• Recessed Housing for Retrofit

• Surface Mount Housing GU-24 Base Socket

Indoor / Outdoor

NH120 - Recessed Housing for New Construction

RH120 -

SMH120G -

NOTE: Surface mount housing cylinders are available in different colors.

LM 120 Series

2541 N. Keystone St. Burbank CA. 91504tel: 1 888 662-4466, [email protected] e-mail: www.lightemittingdesigns.com


Lamp External DimensionsSurface Mount Cylinder Dimensions


LED Architectural DownlightLM 120 Series



Technical Drawing

Features and Specification E26/27 STANDARD SOCKET

GU-24 STANDARD SOCKET

5 YEAR LIMITED

WARRANTY

Features and Specification

•

• CRI 85 / warm white (3000K)• CRI 80 / neutral white (4000K)• High lumen output & high efficacy• • •

• Suitable for recessed IC and non IC housings• Indoor/outdoor: Ideal for damp locations

•

•

•

• I

•

• •

• Powered by Japanese high brightness LED chip

•

LM120 Light Module designed to last 50,000 hours with a minimum of 70% Lumen Maintenance

Power consumption ONLY 12.5 WattsDimmable to 25% with selected dimmersAvailable in GU-24 Base for high efficacy line voltage

sockets

Housing

Proprietary Air-Flow Convection® System designed to minimize heat and maximize LED life by reducing junction temperature of the LED when used in environments exceeding 50°C

LM120 is manufactured using only the highest grade alloys and proprietary die-casting technology in the construction of the dome housing and heat sink to maximize performance and minimize cooling cost

Electronics

Worldwide patented MCPCB technology enables ultra low LED junction temperatures for maintenance free long life

ntegrated high efficiency LED driver and power supply: Power Factor (PFC) >0.94, Efficiency 85%

Smart circuitry with surge and transient voltage protection

Input voltage AC 110V/60Hz OR 220V/50HzPrecisely controlled constant current draw for stable

power source

Optics

Proprietary reflector and optical diffuser system enables 140° glare free comforting soft light without the uncomfortable LED “eye piercing effect”


LM 120 Series LED Architectural Downlight




LM 150 SeriesLED Architectural 6” Downlight


5 YEAR LIMITED

WARRANTY


Product Information

• Ultra low energy consumption resulting in a more green and sustainable environment

•

• Eliminates the costly repairs and replacements of bulbs or fluorescent tubes

•

•

•

•

•

•

•














LED light modules in the industry with its advanced

design and engineering. The LM150 light module is

designed for commercial and residential lighting used

for both indoor/outdoor applications. It fits in most

standard recessed IC or non IC housings for retrofit or

new construction.



light while maximizing the life of the LED light module.







174mm6-7/8”

178mm7”


188mm7-3/8”

144mm5-5/8”

153mm6”

Light Module Models


•

•

•

•

LM150ED-W E26/27 Standard Edison Socket / Dimmable / 3000K Warm White

LM150ED-N E26/27 Standard Edison Socket / Dimmable / 4000K Neutral White

LM150GD-W GU-24 Base Socket / Dimmable / 3000K Warm White

LM150GD-N GU-24 Base Socket / Dimmable / 4000K Neutral White



•

•

•

•

White Trim

Mocha Trim

Black Trim

Gold Trim

•



Indoor / Outdoor


RH150 -

SMH150G -









5 YEAR LIMITED

WARRANTY

•

• CRI 85 / warm white (3000K)• CRI 80 / neutral white (4000K)• High lumen output & high efficacy• • •

• Suitable for recessed IC and non IC housings• Indoor/outdoor: Ideal for damp locations

Housing

• Proprietary Air-Flow Convection® System designed to minimize heat and maximize LED life by reducing junction temperature of the LED when used in environments exceeding 50°C• LM120 is manufactured using only the highest grade alloys and proprietary die-casting technology in the construction of the dome housing and heat sink to maximize performance and minimize cooling cost

Electronics

• Worldwide patented MCPCB technology enables ultra low LED junction temperatures for maintenance free long life • Integrated high efficiency LED driver and power supply: Power Factor (PFC) >0.94, Efficiency 85% • Smart circuitry with surge and transient voltage protection• Input Voltage AC 110V/60Hz OR 220V/50Hz• Precisely controlled constant current draw for stable power source • Powered by Japanese high brightness LED chip Optics

• Proprietary reflector and optical diffuser system enables 140° glare free comforting soft light without the uncomfortable LED “eye piercing effect”


Power consumption ONLY 14.5 WattsDimmable to 25% with selected dimmersAvailable in GU-24 Base for high efficacy line voltage

sockets



E26/27 STANDARD SOCKET




LM 200 SeriesLED Architectural 7-1/2” Downlight



5 YEAR LIMITED

WARRANTY






LED light modules in the industry with its advanced

design and engineering. The LM200 light module is

designed for commercial and residential lighting used

for both indoor/outdoor applications. It fits in most

standard recessed IC or non IC housings for retrofit or

new construction.






Product Information


•


•

•

•

•

•

•

•













220mm8-5/8”

177mm7”

153mm6”


178mm7”

207mm8-3/16”

Light Module Models


•

•

•

•

LM200E-W E26/27 Standard Edison Socket / 3000K Warm White

LM200E-N E26/27 Standard Edison Socket / 4000K Neutral White

LM200G-W GU-24 Base Socket / 3000K Warm White

LM200G-N GU-24 Base Socket / 4000K Neutral White



•

•

•

•

White Trim

Mocha Trim

Black Trim

Gold Trim

•



Indoor / Outdoor


RH200 -

SMH200G -









5 YEAR LIMITED

WARRANTY

•

• CRI 85 / warm white (3000K)• CRI 80 / neutral white (4000K)• High lumen output & high efficacy• •

• •

Housing

• Proprietary Air-Flow Convection® System designed to minimize heat and maximize LED life by reducing junction temperature of the LED when used in environments exceeding 50°C• LM120 is manufactured using only the highest grade alloys and proprietary die-casting technology in the construction of the dome housing and heat sink to maximize performance and minimize cooling cost

Electronics

• Worldwide patented MCPCB technology enables ultra low LED junction temperatures for maintenance free long life • Integrated high efficiency LED driver and power supply: Power Factor (PFC) >0.94, Efficiency 85% • Smart circuitry with surge and transient voltage protection• Input voltage AC 110V/60Hz OR 220V/50Hz• Precisely controlled constant current draw for stable power source • Powered by Japanese high brightness LED chip Optics



Power consumption ONLY 17.5 WattsAvailable in GU-24 Base for high efficacy line voltage

sockets Suitable for recessed IC and non IC housingsIndoor/outdoor: Ideal for damp locations



E26/27 STANDARD SOCKET




P5500 Series PAR38LED Architectural Light


5 YEAR LIMITED

WARRANTY

Product Information

P5500 is a high output PAR 38 LED lamp with

advanced integrated thermal technology. It comes

with a standard Edison base socket and can be used

in commercial or residential lighting for interior

applications. It has a unique patented optical system

that delivers maximum light output with an evenly

uniform light dispersion pattern, ensuring reliable

operation for commercial and hospital applications. It

is available in warm (3000K) and neutral white (4000K)

color temperatures. By using proprietary technologies in the P5500, it is



US Patent # US2007/0062032A1; other US and

International patents pending.


•


•

•

•

•

•

•

•












Lamp External Dimensions


Light Module Models

•

•

P5500D-W E26/27 Standard Edison Socket / Dimmable / 3000K Warm White

P5500D-N E26/27 Standard Edison Socket / Dimmable / 4000K Neutral White




•

•

•

•

White Trim

Mocha Trim

Black Trim

Gold Trim

•



Indoor / Outdoor


RH5500 -

SMH5500G -





Technical Drawing






5 YEAR LIMITED

WARRANTY


•

• CRI 85 / warm white (3000K) • CRI 80 / neutral white (4000K)• High lumen output & high efficacy• • • Suitable for IC and non IC housing for indoor commercial and residential applications

•

•

• Worldwide patented MCPCB technology enables ultra low LED junction temperatures for maintenance free long life • I

•

• •

• Powered by Lumileds High Brightness LED

•

P5500 Light Module designed to last 50,000 hours with a minimum of 70% Lumen Maintenance

Power consumption ONLY 12.5 WattsDimmable to 25% with selected dimmers

Housing

Proprietary Air-Flow Convection® System designed to minimize heat and maximize LED life by reducing junction temperature of the LED when used in environments exceeding 50°C

P5500 is manufactured using only the highest grade alloys and proprietary die-casting technology in the construction of the dome housing and heat sink to maximize performance and minimize cooling cost

Electronics


Smart Circuitry with Surge and Transient Voltage Protection

Input voltage AC 110V/60Hz OR 220V/50HzPrecisely controlled constant current draw for stable

power source

Optics

Proprietary high efficacy optical design using Total Internal Reflection (TIR) to deliver light where you need it most.



E26/27 STANDARD SOCKETE26/27 STANDARD SOCKET


CLM 422 LED Ceiling Luminaire Module


5 YEAR LIMITED

WARRANTY

Light Emitting Design LED Ceiling Luminaire Module is

the first truly engineered commercial grade LED office

light designed to replace fluorescent fixtures of much

higher wattage classes. The CLM 422 delivers evenly

distributed horizontal and vertical foot-candles, ideally

suited for typical work spaces and utility areas. The

four individual light modules and driver make the CLM

422 the most cost effective, commercially viable

solution available on the market today. The patented

Air Bi-Pass Convection System enables excellent

thermal management to ensure long LED life with

extended lumen maintenance and virtually zero fixture

maintenance. Unlike other lighting modules, the CLM

422 weighs only 3.0KG (6.5LB) and does not require

complicated and costly reinforcement of the ceiling.



Product Information



•


•

•

•

•

•

•










Technical Drawing






External Dimensions



Light Module Models

• 50,000 hours with a minimum of 70% Lumen Maintenance

• • • High lumen output & high efficacy • •

• Patented Passive Air-Flow Convection® System designed to minimize heat and maximize LED life by reducing junction temperature of the LED •

• Worldwide Patented MCPCB Technology enables ultra low LED Junction temperatures for maintenance free long life • I

•

• •

• Powered by Japanese high brightness LED chip


CLM422 Ceiling Luminaire Module is designed to last

CRI 85 / neutral white (4000K) CRI 82 / cool white (5000K)

Power consumption ONLY 45 WattsIndoor / non-insulated ceilings only

Light Module

CLM422 is manufactured using only the highest grade extruded alloys in the construction of each individual module to maximize performance

Electronics


Smart circuitry with surge and transient Voltage Protection

Input voltage 100-240VAC 50/60HzPrecisely controlled constant current draw for stable

power source

Optics

•

• CLM422-C - 110/220VAC (5000K Cool White)

CLM422-N - 110/ 220VAC (4000K Neutral White)

NOTE: Housing frame available in different colors.





SML Series LED Surface Mount Luminaire

Derived from its predecessor (CLM 422), the SML Surface

Mount Luminaire delivers high output light with the

versatility of surface mounting anywhere. Designed to

replace fluorescent fixtures of much higher wattage in your

garage or office, the SML is ideal for everyday lighting.

The SML delivers evenly distributed horizontal and vertical

foot-candles, ideally suited for typical work spaces and

utility areas. The patented Air Bi-Pass Convention System

enables excellent thermal management to ensure long

LED life with extended lumen maintenance and virtually

zero fixture maintenance. Unlike other lighting modules,

the SML weighs only 1.0 / 0.5KG (2.21 / 1.0 LB), and does

not require complicated and costly mounting to the ceiling.



Product Information

•

• CRI 85 / neutral white (4000K) • CRI 82 / cool white (5000K)• High lumen output & high efficacy• • I

• Patented Passive Air-Flow Convection® System designed to minimize heat and maximize LED life by reducing junction temperature of the LED•

•

• I

•

• •

• Powered by high brightness LED


SML500 / 1000 Light Module designed to last 50,000 hours with a minimum of 70% Lumen Maintenance

Power consumption ONLY 12 / 24 Wattsndoor / outdoor IP66

Light Module

SML is manufactured using only the highest grade extruded alloys in the construction of each individual model to maximize performance

Electronics

Worldwide patented MCPCB technology enables heat to flow directly from the LED to the heat sink, allowing the LED to operate at cooler temperatures



Input voltage 100-240VAC 50/60Hz.Precisely controlled constant current draw for stable

power source

Optics



Applications

5 YEAR LIMITED

WARRANTY


Technical Drawing


LED Surface Mount Luminaire SML Series



External Dimensions

LED Surface Mount Luminaire

Light Module Models

•

• SML500C - 110/220VAC (5000K Cool White)

• SML1000N - 110/220VAC (4000K Neutral White)

• SML1000C - 110/220VAC (5000K Cool White)

SML500N - 110/220VAC (4000K Neutral White)

SML Series



IL 450 LED Industrial Light

5 YEAR LIMITED

WARRANTY

Benefits of LED LightingBenefits of LED Lighting


• Up to 40 - 60% savings compared to mercury / sodium & metal halide lamps of higher wattage


•

•

•

•

•

•







Product Information

IL 450 is the first truly engineered commercial grade LED

industrial light designed to replace existing high-pressure

mercury, high pressure sodium, and metal halide lamp fixtures

of much higher wattage classes. The IL 450 delivers an

enormous amount of light to where you need it most. No Light

Pollution- Light distribution designed for the industrial

working area application. Air Bi-Pass Convection System

enables excellent thermal management to ensure long LED

life with extended lumen maintenance and virtually zero

fixture maintenance. Snap & Turn spring loaded mounting

system eliminates complicated installation or mounting.

Designed specifically for industrial applications (i.e.

warehouses, factories, gas station), the integrated LED

system and driver make the IL450 the most cost effective,

commercially viable solution available on the market today.







46

5

35

0

46

5

35

0

Technical Drawing




•

• • High lumen output & high efficacy • •

•

• L

•

•

• Worldwide Patented MCPCB Technology enables ultra low LED Junction temperatures for maintenance free long life • Integrated high efficiency LED driver and power supply: Power Factor (PFC) >0.94, Efficiency 93% •

• • Powered by Lumileds high brightness LED

•

IL 450 Light Module designed to last 50,000 hours with a minimum of 70% Lumen Maintenance

CRI 75-80

Available in neutral (4000K) / cool (5000K)white Indoor / outdoor IP68 (Waterproof)

Housing

Patented Isolated Membrane Heat Sink ®System with 360° High-Flow Convection designed to spread the heat away from the Hot Zone thereby minimizing the Junction Temperature when used in environments exceeding 50°C (122°F)

ow-profile, design enables it to be used in various spaces and applications

Patented Quick Mount Snap and Turn mounting system provides for safe and easy installation to any surface or structure

Powder coated with industrial grade Dura-Guard double layer epoxy for year round indoor/outdoor applications with industry leading 10 years protection on weather and corrosion

Electronics


Input Voltage 90-277VAC 50/60 Hz

Optics

Full Cut-Off proprietary reflector and optical system providing powerful glare free uniform lighting, eliminating the uncomfortable LED “eye-piercing effect”

External Dimensions



Light Module Models

•

• IL45075 - 110 - 277VAC / 75W

• IL45100 - 110 - 277VAC / 100W

• IL45150 - 110 - 277VAC / 150W

• IL45185 - 110 - 277VAC / 185W

IL45050 - 110 - 277VAC / 50W

NOTE: Housing available in different colors.





Mounting Option Accessories




SST-IL45-B Spring Loaded Snap & Turn Surface Mount

W90-IL45-60B Wall Mount Elbow Bracket

CH4-IL45-50B Chain Chandelier Hanging System

SST-IL45-H60B Spring Loaded Snap & Turn Hanging System

RWL II LED ROADWAY LIGHTING

5 YEAR LIMITED

WARRANTY

The RWLII Type II (6-9m pole pitch of 15-30m) LED

Streetlight is the industry's first two piece design. This

allows for a more uni-body housing and 360° of air

convection around the “Hot Zone” which maximizes the

surface area and increases thermal conductivity. Due to the

unique construction of the heat sink, we also are able to

obtain an unprecedented IP 68 rating (water submergible) for

all electronics contained within the LED light engine and

power supply. This is critical for harsh weather as hot and

cold temperature changes would cause parts rapidly degrade

and fail. The optical system in the RWLII gives ideal light

output for most standards with minimum light pollution, thus

eliminating the need for costly secondary optical systems.

Currently, the RWLII meets or exceeds the NHTSB (National

Highway Transportation Safety Board of USA) European CIE

and Australian standards as well as the American National

Standard Practice for Roadway Lighting.



Product Information

Benefits of LED LightingBenefits of LED Lighting


•

• Eliminates unnecessary service and repair costs

•

•

•

•

•

•

Up to 40 - 60% savings compared to mercury / sodium & metal halide lamps of higher wattage


Increased road visibility and safety


Rugged - waterproof unit






46

5

35

0

46

5

35

0

Technical Drawing

LED ROADWAY LIGHTINGRWL II




Optics

• Full Cut-Off optical system with no glare or light pollution • Available in Neutral White (4000K / 75 CRI) or Cool White (5000K / 70 CRI) • Ideal application for 6 to 9 meters pole height with a pole pitch of 15 to 30 meters • High lumen output & high efficacy • Designed to last 50,000 hours with a minimum of 70% Lumen Maintenance • Meets and /or exceeds NHTSB (National Highway Transportation Safety Board of USA), European CIE and Australian standards • Meets American National Standard Practice for Roadway Lighting

Housing

• Patented Isolated Membrane Heat Sink ®System with 360° High-Flow Convection designed to spread the heat away from the Hot Zone thereby minimizing the Junction Temperature when used in environments exceeding 50°C (122°F) • Powder coated with industrial grade Dura-Guard double layer epoxy for year round indoor/outdoor applications with industry leading 10 years protection on weather and corrosion

Electronics

• Worldwide Patented MCPCB Technology enables ultra low LED Junction temperatures for maintenance free long life• Integrated high efficiency LED driver and power supply Power Factor (PFC) >0.94, Efficiency 93%• Input voltage 90-277VAC 50/60 Hz• Powered by High Brightness LED

External Dimensions

RWL II LED ROADWAY LIGHTING


Light Module Models

• RWL II 050 - 110 - 277VAC / 50W

• L II 075 - 110 - 277VAC / 75W

• RWL II 100 - 110 - 277Vac / 100W

• RWL II 150 - 110 - 277VAC / 150W

• RWL II 185 - 110 - 277VAC / 185W

RW

NOTE: Housing available in different colors.




LeD 2012 Catalog

Documents

Transcript of LeD 2012 Catalog