LECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Readout Optical Links Using...
-
Upload
cornelius-parker -
Category
Documents
-
view
218 -
download
0
Transcript of LECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Readout Optical Links Using...
![Page 1: LECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Readout Optical Links Using Bandwidth Efficient Digital Modulation Stefanos Dris Imperial.](https://reader033.fdocuments.net/reader033/viewer/2022051517/56649ec75503460f94bd326d/html5/thumbnails/1.jpg)
LECC 2006, ValenciaLECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Potential Upgrade of the CMS Tracker Analog
Readout Optical Links Using Bandwidth Efficient Readout Optical Links Using Bandwidth Efficient Digital ModulationDigital Modulation
Stefanos DrisImperial College London
CERN PH-MIC-OE
![Page 2: LECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Readout Optical Links Using Bandwidth Efficient Digital Modulation Stefanos Dris Imperial.](https://reader033.fdocuments.net/reader033/viewer/2022051517/56649ec75503460f94bd326d/html5/thumbnails/2.jpg)
• A feasibility study for the development of a fast digital readout link for Super LHC (SLHC), based on the current CMS Tracker readout optical link components (first introduced at LECC 2005, Heidelberg).
• Why?A digital system based on the existing components that can deliver sufficient performance for SLHC operation could potentially be a cost-effective solution.
• How?The example of DSL: Advanced RF digital modulation is used to transfer data at 2-8Mbit/s over copper telephone lines (3-dB bandwidth of <30kHz).
• What is the data rate that we can achieve with bandwidth-efficient digital modulation over the current CMS Tracker optical link?
Objectives & MotivationObjectives & Motivation
IntroductionIntroduction
RF Modulation
OFDM
QAM Tests
Conclusion
![Page 3: LECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Readout Optical Links Using Bandwidth Efficient Digital Modulation Stefanos Dris Imperial.](https://reader033.fdocuments.net/reader033/viewer/2022051517/56649ec75503460f94bd326d/html5/thumbnails/3.jpg)
The Current CMS Tracker Optical The Current CMS Tracker Optical LinksLinks
IntroductionIntroduction
RF Modulation
OFDM
QAM Tests
Analog Pulse Amplitude Modulation (PAM)Equivalent digital resolution = 8bitsSample rate = 40MSamples/sEquivalent digital data rate = 320Mbit/s
Conclusion
![Page 4: LECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Readout Optical Links Using Bandwidth Efficient Digital Modulation Stefanos Dris Imperial.](https://reader033.fdocuments.net/reader033/viewer/2022051517/56649ec75503460f94bd326d/html5/thumbnails/4.jpg)
• The Shannon CapacityShannon determined that the capacity, C, of a noisy communication channel of bandwidth, B, is given by:
C=B*log2(1+SNR) [bits/s]
Digital CommunicationsDigital Communications
Introduction
RFRF ModulationModulation
OFDM
QAM Tests
3-dB bandwidth ~150MHz
(due to electronics)
SNR=48dB (over 100MHz)
Conclusion
![Page 5: LECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Readout Optical Links Using Bandwidth Efficient Digital Modulation Stefanos Dris Imperial.](https://reader033.fdocuments.net/reader033/viewer/2022051517/56649ec75503460f94bd326d/html5/thumbnails/5.jpg)
• Quadrature Amplitude Modulation (QAM)
Passband Modulation: Data bits are modulated on top of a higher frequency sinusoidal carrier.
We transmit symbols which represent several bits each.
Each symbol corresponds to a combination of amplitude and phase. Compared to just varying the amplitude, more bits/symbol can be transmitted.
Quadrature Amplitude Quadrature Amplitude ModulationModulation
Introduction
RF ModulationRF Modulation
OFDM
QAM Tests
Am
plit
ud
e
3210Time
symbolperiod
Conclusion
![Page 6: LECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Readout Optical Links Using Bandwidth Efficient Digital Modulation Stefanos Dris Imperial.](https://reader033.fdocuments.net/reader033/viewer/2022051517/56649ec75503460f94bd326d/html5/thumbnails/6.jpg)
• QAM is simply the simultaneous amplitude modulation of two sinusoidal carriers which are 90° to each other.
Quadrature Amplitude Quadrature Amplitude ModulationModulation
Introduction
RF ModulationRF Modulation
OFDM
QAM Tests
1101
11
01
Q=+3V
I=-1V
Cos(2πfct)
Sin(2πfct)
Q*Sin(2πfct)
I*Cos(2πfct)
I*Cos(2πfct) + Q*Sin(2πfct)
In-PhaseComponent
QuadratureComponent
Looks like Euler’s formula!ejω=cos(ω)+j sin(ω)
Conclusion
![Page 7: LECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Readout Optical Links Using Bandwidth Efficient Digital Modulation Stefanos Dris Imperial.](https://reader033.fdocuments.net/reader033/viewer/2022051517/56649ec75503460f94bd326d/html5/thumbnails/7.jpg)
Quadrature Amplitude Quadrature Amplitude ModulationModulation
Introduction
RF ModulationRF Modulation
OFDM
QAM Tests
• We can represent QAM symbols in the complex plane since they each have a unique amplitude and a phase.
• It is used like an eye diagram in binary systems.
Conclusion
![Page 8: LECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Readout Optical Links Using Bandwidth Efficient Digital Modulation Stefanos Dris Imperial.](https://reader033.fdocuments.net/reader033/viewer/2022051517/56649ec75503460f94bd326d/html5/thumbnails/8.jpg)
Quadrature Amplitude Quadrature Amplitude ModulationModulation
Introduction
RF ModulationRF Modulation
OFDM
QAM Tests
• Example:16-QAM received constellation diagram.log2(16)=4 bits/symbol
1000 symbols transmitted through a noisy channel
Qua
drat
ure
Am
plitu
de
In-Phase Amplitude
Conclusion
![Page 9: LECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Readout Optical Links Using Bandwidth Efficient Digital Modulation Stefanos Dris Imperial.](https://reader033.fdocuments.net/reader033/viewer/2022051517/56649ec75503460f94bd326d/html5/thumbnails/9.jpg)
Quadrature Amplitude Quadrature Amplitude ModulationModulation
Introduction
RF ModulationRF Modulation
OFDM
QAM Tests
• The number of bits/symbol (4 bits/symbol) and the symbol rate (1MS/s) determine the total data rate (4Mbits/s), and channel bandwidth required (~4MHz).
Qua
drat
ure
Am
plitu
de
In-Phase Amplitude
Conclusion
![Page 10: LECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Readout Optical Links Using Bandwidth Efficient Digital Modulation Stefanos Dris Imperial.](https://reader033.fdocuments.net/reader033/viewer/2022051517/56649ec75503460f94bd326d/html5/thumbnails/10.jpg)
Quadrature Amplitude Quadrature Amplitude ModulationModulation
Introduction
RF ModulationRF Modulation
OFDM
QAM Tests
• We can use more bits/symbol to increase the data rate in the same bandwidth, but at the cost of higher bit error rate (BER).
• 64-QAM: 6 bits/symbol, symbol rate=1MS/s, data rate=6Mbits/s
Qua
drat
ure
Am
plitu
de
In-Phase Amplitude
Conclusion
![Page 11: LECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Readout Optical Links Using Bandwidth Efficient Digital Modulation Stefanos Dris Imperial.](https://reader033.fdocuments.net/reader033/viewer/2022051517/56649ec75503460f94bd326d/html5/thumbnails/11.jpg)
Multi-Carrier SystemsMulti-Carrier Systems
Introduction
RF Modulation
OFDMOFDM
QAM Tests
• A page out of the ADSL book: Orthogonal Frequency Division Multiplexing (OFDM)
Given the available bandwidth of our channel, we can:
a) Use a single QAM carrier with a high symbol rate occupying the entire frequency range.
b) We can split the channel into smaller slices. Each slice can have a low symbol rate QAM carrier.
In systems such as ADSL and Wi-Fi, multiple carriers are used.
-20
-15
-10
-5
0
Mag
nitu
de (
dB)
400350300250200150100500Frequency (MHz)
Conclusion
![Page 12: LECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Readout Optical Links Using Bandwidth Efficient Digital Modulation Stefanos Dris Imperial.](https://reader033.fdocuments.net/reader033/viewer/2022051517/56649ec75503460f94bd326d/html5/thumbnails/12.jpg)
Multi-Carrier SystemsMulti-Carrier Systems
Introduction
RF Modulation
OFDMOFDM
QAM Tests
• A page out of the ADSL book: Orthogonal Frequency Division Multiplexing (OFDM)
Given the available bandwidth of our channel, we can:
a) Use a single QAM carrier with a high symbol rate occupying the entire frequency range.
b) We can split the channel into smaller slices. Each slice can have a low symbol rate QAM carrier.
In systems such as ADSL and Wi-Fi, multiple carriers are used.
-20
-15
-10
-5
0
Mag
nitu
de (
dB)
400350300250200150100500Frequency (MHz)
QAM SignalBandwidth=300MHz
QAM Modulated Carrier
Conclusion
![Page 13: LECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Readout Optical Links Using Bandwidth Efficient Digital Modulation Stefanos Dris Imperial.](https://reader033.fdocuments.net/reader033/viewer/2022051517/56649ec75503460f94bd326d/html5/thumbnails/13.jpg)
Multi-Carrier SystemsMulti-Carrier Systems
Introduction
RF Modulation
OFDMOFDM
QAM Tests
• A page out of the ADSL book: Orthogonal Frequency Division Multiplexing (OFDM)
Given the available bandwidth of our channel, we can:
a) Use a single QAM carrier with a high symbol rate occupying the entire frequency range.
b) We can split the channel into smaller slices. Each slice has a low symbol rate QAM carrier.
In systems such as ADSL and Wi-Fi, multiple carriers are used.
-20
-15
-10
-5
0
Atte
nuat
ion
(dB
)
400350300250200150100500Frequency (MHz)
Conclusion
![Page 14: LECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Readout Optical Links Using Bandwidth Efficient Digital Modulation Stefanos Dris Imperial.](https://reader033.fdocuments.net/reader033/viewer/2022051517/56649ec75503460f94bd326d/html5/thumbnails/14.jpg)
QAM Laboratory TestsQAM Laboratory Tests
Introduction
RF Modulation
OFDM
QAM TestsQAM Tests
• Objective
To test the feasibility of using QAM over a CMS Tracker readout optical link, and determine the data rate.
• We cannot test a high-speed multi-carrier system at this point (if we could…).
• We can, however, pass one QAM carrier at a time through the link: In each test, change the carrier frequency and analyze each carrier separately. Hence we are emulating an OFDM system by independently testing each of the carriers.
-20
-15
-10
-5
0
Cha
nnel
Ma
gnitu
de (
dB)
QAM SignalBandwidth~1-2MHz
Frequency (arbitrary scale)Fc
QAM CarrierCarrier Frequency = Fc
Signal Power = Ps
Conclusion
![Page 15: LECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Readout Optical Links Using Bandwidth Efficient Digital Modulation Stefanos Dris Imperial.](https://reader033.fdocuments.net/reader033/viewer/2022051517/56649ec75503460f94bd326d/html5/thumbnails/15.jpg)
Test SetupTest Setup
Introduction
RF Modulation
OFDM
QAM TestsQAM Tests
• Modulator:
Agilent E4438C Vector Signal Generator.
Capable of QAM signal generation at symbol rates up to 50MSymbols/s, and 256-QAM (8bits/symbol). Maximum data rate = 50M*8 = 400 Mbits/s.
Generates random data patterns internally.
• Demodulator:
Agilent E4440A Spectrum Analyzer.
Capable of QAM demodulation (up to 256-QAM), with 10MHz analysis bandwidth.
Both instruments are made for telecom applications, and can work with carrier frequencies up to 27GHz.
Conclusion
![Page 16: LECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Readout Optical Links Using Bandwidth Efficient Digital Modulation Stefanos Dris Imperial.](https://reader033.fdocuments.net/reader033/viewer/2022051517/56649ec75503460f94bd326d/html5/thumbnails/16.jpg)
Test SetupTest Setup
Introduction
RF Modulation
OFDM
QAM TestsQAM Tests
Conclusion
![Page 17: LECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Readout Optical Links Using Bandwidth Efficient Digital Modulation Stefanos Dris Imperial.](https://reader033.fdocuments.net/reader033/viewer/2022051517/56649ec75503460f94bd326d/html5/thumbnails/17.jpg)
Example DataExample Data
Introduction
RF Modulation
OFDM
QAM TestsQAM Tests
• 32-QAM (5bits/symbol), Carrier Frequency=320MHz, Symbol Rate=1MS/s, Power=-30dBm
From the received constellations, we can estimate the SNR.
-0.8
-0.4
0.0
0.4
0.8
Qua
drat
ure
Am
plitu
de
-0.8 -0.4 0.0 0.4 0.8
In-Phase Amplitude
Conclusion
![Page 18: LECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Readout Optical Links Using Bandwidth Efficient Digital Modulation Stefanos Dris Imperial.](https://reader033.fdocuments.net/reader033/viewer/2022051517/56649ec75503460f94bd326d/html5/thumbnails/18.jpg)
ResultsResults
Introduction
RF Modulation
OFDM
QAM TestsQAM Tests
• Signal to Noise Ratio as a function of carrier frequency and transmission power
We have essentially characterized the entire frequency range of the channel. This is all the information needed to calculate the achievable data rate using QAM over the Tracker optical links.
(See S. Dris et al., LECC 2005 for details of the calculation involved)
50
40
30
20
10
0
SN
R (
dB
)
10008006004002000Frequency (MHz)
-40
-35
-30
-25
-20 Inp
ut P
ow
er (dB
m)Conclusion
![Page 19: LECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Readout Optical Links Using Bandwidth Efficient Digital Modulation Stefanos Dris Imperial.](https://reader033.fdocuments.net/reader033/viewer/2022051517/56649ec75503460f94bd326d/html5/thumbnails/19.jpg)
ResultsResults
Introduction
RF Modulation
OFDM
QAM TestsQAM Tests
Conclusion
• Achievable data rate for various target BERs
The total data rate achievable using QAM-OFDM also depends on the transmission power used which is implementation specific. The (most likely) achievable data rate is estimated at 3-4 Gbits/s.
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
Da
ta R
ate
(G
bits
/s)
013610Power Backoff (dB)
1.00.90.80.70.60.50.40.30.20.10.0
Normalized Transmit Power
10-3
10-5
10-7
10-9
![Page 20: LECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Readout Optical Links Using Bandwidth Efficient Digital Modulation Stefanos Dris Imperial.](https://reader033.fdocuments.net/reader033/viewer/2022051517/56649ec75503460f94bd326d/html5/thumbnails/20.jpg)
• We have shown that data rates in the Gbit/s range are possible over the CMS Tracker optical links, using a QAM-based digital modulation scheme.
• Forward Error Correction (FEC) has not been considered in this study. We could expect a lower BER for the same data rate.
• This upgrade path would require creating a proprietary and novel system (i.e. forget about COTS components and ‘following’ industrial trends).
• More R&D and collaboration with industry and engineering departments will be necessary if we are to use this concept in future readout systems.
• What will be?
We have proved that the principle works, but the complexity and cost (as well as the projected power consumption) of hardware implementation needs to be investigated next.
We will then decide on whether this is worth pursuing further…
ConclusionConclusion
Introduction
RF Modulation
OFDM
QAM Tests
ConclusionConclusion