Leading Through Innovation -...
Transcript of Leading Through Innovation -...
Technical SpecificationsSENNEBOGEN Rubber Tired Material Handler
EngineModel Cummins QSL9, Tier 4 FinalNet Power 305 HP (224 kW)
Operating WeightM/rubber tired 100,900 lb (45,360 kg)
Leading Through InnovationReachstandard 51'6" (16 m) (stick pin)optional up to 58'6" (18 m) (stick pin)
Magnet Systemrating 25 kW
2 Subject to technical modification.
Technical Specifications 835 M “E”SWING SYSTEMswing speed 0 - 8 rpmswing hydraulic open loopdrive 2 x axial piston motor driving planetary gearbox, integrated brake valvesswing brake multidisc brake, spring loadedswing bearing external teeth, sealed ball bearing
TRAVEL / UNDER CARRIAGEtype rubber tired MP41Edrive system all-wheel drive variable displacement motor with dual stage power shift transmissiontravel speed 1st 0-3.4 mph (0-5.4 km/h) 2nd 0-12.0 mph (0-20 km/h)tires 8 x 12.00-24 (solid rubber)steering joystick steeringfront axle oscillating with hydraulic lock, integrated safety check valvesrear axle fixedservice brake disc brakeparking brake wet, multidisc brake spring loadedsafety travel alarm
REFILL CAPACITIESfuel tank 165 gal (625 L)engine cooling system 15.85 gal (60.0 L)engine oil w / filter 7.53 gal (28.5 L)hydraulic tank 132 gal (500 L)hydraulic system 180 gal (680 L)swing gear (each) 1.06 gal (4.0 L)axle hub (front axle) 0.31 gal (1.2 L)axle hub (rear axle) 0.39 gal (1.5 L)axle differential (front axle) 6.9 gal (26.0 L)axle differential (rear axle) 5.1 gal (19.5 L)axle transmission 0.8 gal (3.0 L)swing ring lubrication reservoir 0.26 gal (1.0 L)central lubrication reservoir 5.5 lb (2.5 kg)diesel exhaust fluid 7.93 gal (30 L)
MAGNET SYSTEMrating 25 kWvoltage (magnetized) 230 Vcurrent (cold condition) 109 Ampscontroller Hubbellgenerator Baldordrive hydraulic
ENGINEmodel Cummins QSL9-C300type in-line, 6 cylinder, cooled exhaust gas recirculation, water cooledemission EPA Tier 4 Final net power 305 HP (224 kW) @ 2,000 rqminjection high pressure common-raildisplacement 8.9 L (543.1 cu.in.)bore 4.49 in (114 mm)stroke 5.69 in (145 mm)aspiration turbo charged, charge air cooledfuel tank 165 gal (625L)air filtration direct flow filtration system dual stage filter with pre-filtercontrol integrated ECM automatic idle - stop eco mode
ELECTRICALalternator 100 V/Ahstarter 24 Vm 7.8 kWbattery 2 x 12 V, 150 Ahlights 2 x cab roof, type halogen 2 x frame upper carriage, type H4
HYDRAULIC SYSTEMsystem type LUDV load sensing pilot pressure controlled open centerpump type variable-displacement axial-piston pumpmax. pump flow 196 gpm (740 l / m)max. pressure 5,076 psi (350 bar)hydraulic tank 132 gal (500 L)hydraulic system 180 gal (680 L)filtration dual filtration system 3 micron (HydroClean)
COOLINGcooling type cool-on-demand, suction-type fan system, side by sidehydraulic / water hydraulic fan drive axial piston pump, reversible fan thermo- statically controlled, closed loop system charge air direct fan drive
WEIGHToperating weight 100,000 lb (45,360 kg)
3Subject to technical modification.
Standard / Optional Equipment 835 M “E”ENGINEWater separator in fuel line Automatic idle / engine stop control Eco mode Visual fuel tank check Engine block & water separator pre-heater
ELECTRICBattery disconnect switch Centralized fuse box Battery jump start connection from ground level
HYDRAULICPilot pressure controlled variable displacement pump Thermostatically controlled cooling system Centralized hydraulic test ports Protection covers for pilot pressure control valves 3 micron dual filtration system Load sensing, flow on demand hydraulic system Optimized hydraulic pump regulation (GLR) Visual hydraulic tank check from ground level Attachments open, close & rotation hydraulics Hydraulic tank shut off valve Electrical hydraulic tank pre-heater Biodegradable hydraulic oil Hydraulic circuit for scrap shear Hydraulic circuit for hammer, breaker Additional hydraulic circuits Attachment return filtration filters (60 µm)
UPPER CARRIAGERearview & right side view camera system Automatic lubrication system Anti-slip mats on walking area Lockable side doors Handrails on top of upper carriage Mirror left side Turning signal lights in upper carriage frame Removable panels Additional light package Custom colors Seawater paint coating
OPERATORS CAB (maXCab)Hydraulic elevating cab system E260 Multi adjustable, air suspended operators seat 3” (76 mm) seat belt Seat heater Automatic climate control (heater / AC) Air outlets w / defroster Storage area for lunch box Large cup holder Fire extinguisher Tinted windows with safety glass Door window as sliding window AM / FM Radio with CD player & speakers Removable floor mat SenCon diagnostic system Multicolor Monitor Tilt out front window Halogen light package on cab roof Mechanical hour meter Sliding door Catwalk w / handrail 12 V / 24 V power outlet Windshield wiper and washers Emergency exit hammer Safety lever Sun shade Interior lighting Rain cover front window Outside mirror
OPERATORS CAB (maXCab)Optical and acoustic warning system Positive filtered ventilation (pressurized cab) Safety check valves for elevating cab cylinder Foot rest maXCab industry Windshield protection guard Skylight protection guard Skylight FOPS guard Bullet proof windshield Bullet proof skylight Polycarbonate side windows Additional light package Fixed cab elevation Hydraulic elevating up and out cab E300/260 Operators cab with floor window Steering column instead of joystick steering Steering column in combination with joystick steering Additional cameras
UNDERCARRIAGERobust designed material handling under carriage Heavy duty axles Solid rubber tires 12.00-24 (8x) incl. intermediate ring Front axle oscillating w/axle unlock (travel position) Dual stage power shift transmission Drive train protection guards Travel alarm Centralized lubrication points 2 circuit servo brake system 4-point outriggers w/integrated safety check valves in outrigger cylinders Tool and storage compartments, lockable Individual outrigger control Increased size outrigger pads to decrease ground pressure Pneumatic tires Towing hitch package
WORKING EQUIPMENTPurpose built material handling boom Purpose built material handling stick Attachment hydraulic line connections with ball valves Boom position 1 Safety check valves for stick cylinders Safety check valves for boom cylinders Cylinder end position dumping Boom hoist limitation Bronze bushings connected to automatic lubrication system Stick limitation Halogen light package boom Purpose built material handling stick with reversing linkage Purpose built material handling boom for scrap shears Boom position 2
MAGNET SYSTEMHydraulic driven generator Magnet controller Magnet suspension link
ATTACHMENTSOrange peel grapple Mag grapple Clamshell Magnet Log grapple Scrap shear Power attachment Pipe handler Live heel
SWING SYSTEM360° protection cover, removable Manual operated swing gear pinion lubrication system
Standard Equipment Optional Equipment
4
Meters
Feet
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
50 10 15 20 25 30 35 40 45 50
Meters Feet
0
2
1
4
3
6
5
-6
-4
-5
-2
-3
-1
8
7
10
9
12
11
14
13
16
15
17
0
5
10
15
20
25
30
-10
-5
-15
-20
35
40
45
50
55
[12.6]
[13.6]
[14.8]
[15.6]
[15.8]
[10.2]
[8.9]
[8.8]
[7.7]
[9.0]
[9.8]
[10.0]
[10.2]
[10.6]
[11.1]
[11.7]
[12.2]
[12.3]
[11.9]
[11.0]
[9.5]
[5.8]
[7.8]
[8.8]
[8.8]
[8.9]
[9.1]
[9.4]
[9.7]
[9.9]
[10.0]
[9.7]
[9.0]
[8.0]
[5.9]
[7.6]
[7.8]
[7.9]
[8.0]
[8.2]
[8.3]
[8.4]
[8.3]
[8.0]
[7.5]
[6.6]
[5.5]
[7.0]
[7.0]
[7.1]
[7.2]
[7.2]
[7.2]
[7.1]
[6.8]
[6.3]
[5.4]
[6.2]
[6.3]
[6.3]
[6.3]
[6.2]
[6.0]
[5.7]
[5.1] [3.9]
[4.3]
[5.4]
[5.4]
[5.3]
[5.0]
[4.5]
27,778
29,983
32,628
34,392
34,833
22,487
19,621
19.400
16,975
19,841
21,605
22,046
22,487
23,369
24,417
25,794
26,896
27,117
26,235
24,251
20,944
12,787
17,196
19,400
19,400
19,621
20,062
20,723
21,385
21,826
22,046
21,385
19,841
17,637
13,007
16,755
17,196
17,416
17,637
18,078
18,298
18,519
18,298
17,637
16,535
14,550
12,125
15,432
15,432
15,653
15,873
15,873
15,873
15,653
14,991
13,889
11,905
13,669
13,889
13,889
13,889
13,669
13,228
12,566
11,243
9,480
11,905
11,905
11,684
11,023
9,921
8,598
31,305
44,321
29,762
11,684
10,141
11,023
[14.2]
[20.1]
[13.5]
[5.3]
[4.6]
[5.0]
Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO 10567 and do not exceed 75% or tipping and 87% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for 360° with machine support outriggers. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator’s & safety manual provided be Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.
K16-1
Working Equipment K16-1
reach 51'6" (15.69 m)boom 29'10" (9.1 m)stick 22'8" (6.9 m)boom pos. 1
Operator’s Cab
model E270 maXCab hydraulic elevating up 8'8" (2.65 m) elevation eye level approx. 19' (5.8 m)
Undercarriage
model MP41E 4-point outriggerstires 8 x 12.00-24 solid rubber
machine shown in mirror image
Lift Capacities835 M “E”
5
[13.2]
[14.2]
[14.9]
[11.7]
[7.4]
[6.5]
[6.5]
[9.8]
[10.2]
[10.7]
[11.2]
[11.6]
[11.6]
[11.3]
[10.5]
[9.2]
[7.6]
[7.3]
[8.0]
[8.2]
[8.2]
[8.4]
[8.7]
[8.9]
[9.2]
[9.4]
[9.4]
[9.2]
[8.6]
[7.8]
[6.6]
[6.6]
[7.2]
[7.3]
[7.3]
[7.4]
[7.5]
[7.7]
[7.8]
[7.9]
[7.9]
[7.7]
[7.2]
[6.6]
[5.6]
[5.5]
[6.0]
[6.5]
[6.5]
[6.6]
[6.6]
[6.7]
[6.8]
[6.8]
[6.7]
[6.5]
[6.1]
[5.5]
[4.7]
[5.3]
[5.7]
[5.9]
[5.9]
[5.9]
[5.9]
[5.9]
[5.9]
[5.8]
[5.5]
[5.2]
[4.6]
[3.8]
[4.9]
[5.3]
[5.3]
[5.2]
[5.2]
[5.1]
[4.9]
[4.7]
[4.3]
[3.7]
[4.5]
[4.6]
[4.5]
[4.4]
[4.2]
[3.9]
[3.4]
[19.5]
[9.5]
[3.9]
[3.4]
[3.8]
[7.2]
[7.3] [6.2]
29,101
31,305
32,849
25,794
16,314
14,330
14,330
21,605
22,487
23,589
24,692
25,573
25,573
24,912
23,148
20,282
16,755
16,094
17,637
18,078
18,078
18,519
19,180
19,621
20,282
20,723
20,723
20,282
18,960
17,196
14,550
14,550
15,873
16,094
16,094
16,314
16,535
16,975
17,196
17,416
17,416
16,975
15,873
14,550
12,346
12,125
13,228
14,330
14,330
14,550
14,550
14,771
14,991
14,991
14,771
14,330
13,448
12,125
10,362
11,684
12,566
13,007
13,007
13,007
13,007
13,007
13,007
12,787
12,125
11,464
10,141
8,377
10,803
11,684
11,684
11,464
11,464
11,243
10,803
10,362
9,480
8,157
9,921
10,141
9,921
9,700
9,259
8,598
7,496
16,094 13,669
42,990
20,944
8,598
7,496
8,377
15,873
Meters
Feet
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
50 10 15 20 25 30 35 40 45 50 55
Meters Feet
0
2
1
4
3
6
5
-6
-4
-5
-2
-3
-1
8
7
10
9
12
11
14
13
16
15
17
18
19
0
5
10
15
20
25
30
-10
-5
-15
-20
35
40
45
50
55
60
65
Lift Capacities835 M “E”
Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO 10567 and do not exceed 75% or tipping and 87% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for 360° with machine support outriggers. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator’s & safety manual provided be Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.
K18-1
Working Equipment K18-1
reach 57'8" (17.58 m)boom 33'2" (10.1 m)stick 25'11" (7.9 m)boom pos. 1
Operator’s Cab
model E270 maXCab hydraulic elevating up eye level approx. 19' (5.8 m)
Undercarriage
model MP41E 4-point outriggerstires 8 x 12.00-24 solid rubber
machine shown in mirror image
6
25,573
27,778
29,542
17,637
13,448
12,566
12,566
13,228
19,180
20,503
21,605
22,707
23,148
22,928
21,164
19,180
18,298
15,432
15,873
16,314
17,196
17,857
18,298
18,739
18,739
18,078
17,196
15,653
13,448
13,448
13,448
13,669
13,889
14,330
14,859
15,212
15,432
15,653
15,653
15,212
14,550
13,228
11,684
12,125
12,125
12,125
12,346
12,566
12,787
13,228
13,228
13,448
13,228
13,007
12,346
11,464
9,921
10,141
11,023
11,023
11,234
11,243
11,464
11,683
11,684
11,684
11,464
11,243
10,582
9,700
8,377
10,141
10,141
10,141
10,362
10,362
10,362
10,141
9,921
9700
9,039
8,157
8,818
9,259
9,259
9,259
9,039
9,039
8,598
8,157
7,496
12,787 11,464
34,171
38,801
11,684
7,275
7,275
8,157
11,464
14,991
11,464
[11.6]
[12.6]
[13.4]
[8.0]
[6.1]
[5.7]
[5.7]
[6.0]
[8.7]
[9.3]
[9.8]
[10.3]
[10.5]
[10,4]
[9.6]
[8.7]
[8.3]
[7.0]
[7.2]
[7.4]
[7.8]
[8.1]
[8.3]
[8.5]
[8.5]
[8.2]
[7.8]
[7.1]
[6.1]
[5.8]
[6.1]
[6.1]
[6.2]
[6.3]
[6.5]
[6.7]
[6.9]
[7.0]
[7.1]
[7.1]
[6.9]
[6.6]
[6.0]
[5.3]
[5.2]
[5.5]
[5.5]
[5.5]
[5.6]
[5.7]
[5.8]
[6.0]
[6.0]
[6.1]
[6.0]
[5.9]
[5.6]
[5.2]
[4.5]
[4.6]
[5.0]
[5.0]
[5.1]
[5.1]
[5.2]
[5.3]
[5.3]
[5.3]
[5,2]
[5.1]
[4.8]
[4.4]
[3.8]
[4.6]
[4.6]
[4.6]
[4.7]
[4.7]
[4.7]
[4.6]
[4.5]
[4,4]
[4.1]
[3.7]
[4.0]
[4.2]
[4.2]
[4.2]
[4.1]
[4.1]
[3.9]
[3.7]
[3.4]
[15.5]
[17.6]
[5.3]
[3.3]
[3.3]
[3.7]
[5.2]
[6.8]
[5.2]
Meters
Feet
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
50 10 15 20 25 30 35 40 45 50 55
Meters Feet
0
2
1
4
3
6
5
-6
-4
-5
-8
-7
-2
-3
-1
8
7
10
9
12
11
14
13
16
15
17
18
0
5
10
15
20
25
30
-10
-5
-15
-20
-25
35
40
45
50
55
60
Lift Capacities835 M “E”
Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO 10567 and do not exceed 75% or tipping and 87% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for 360° with machine support outriggers. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator’s & safety manual provided be Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.
B18-1
Working Equipment B18-1
reach 58'6" (17.83 m)boom 35'5" (10.8 m)stick 25'11" (7.9 m)boom pos. 1
Operator’s Cab
model E300/260 maXCab hydraulic elevating up & out (optional item) eye level approx. 20'4" (6.2 m)
Undercarriage
model MP41E 4-point outriggerstires 8 x 12.00-24 solid rubber
machine shown in mirror image
7
18,960
19,400
26,676
28,880
30,864
32,187
28,219
18,298
16,755
16,314
19,180
20,503
20,503
20,944
21,826
22,928
23,810
24,692
24,471
23,369
20,944
17,637
16,314
17,637
17,637
17,857
18,298
19,400
19,621
19,621
18,739
16,975
14,550
13,669
15,432
15,432
15,432
15,653
16,094
16,314
16,314
16,094
15,212
13,889
11,684
12,346
13,669
13,669
13,669
13,669
13,669
13,669
13,228
12,566
11,243
9,259
11,905
11,905
11,905
11,684
11,464
10,803
10,141
8,598
9,921
9,700
9,259
8,598
7,496
31,746
42,990
16,535
7,275
7,055
8,598
[8.8]
[12.1]
[13.1]
[14.0]
[14.6]
[12.8]
[8.3]
[7.6]
[7.4]
[8.7]
[9.3]
[9.3]
[9.5]
[9.9]
[10.4]
[10.8]
[11.2]
[11.1]
[10.6]
[9.5]
[8.0]
[7.4]
[8.0]
[8.0]
[8.1]
[8.3]
[8.6]
[8.8]
[8.9]
[8.9]
[8.5]
[7.7]
[6.6]
[6.2]
[7.0]
[7.0]
[7.0]
[7.1]
[7.3]
[7.4]
[7.4]
[7.3]
[6.9]
[6.3]
[5.3]
[5.6]
[6.2]
[6.2]
[6.2]
[6.2]
[6.2]
[6.2]
[6.0]
[5.7]
[5.1]
[4.2]
[5.4]
[5.4]
[5.4]
[5.3]
[5.2]
[4.9]
[4.6]
[3.9]
[4.5]
[4.4]
[4.2]
[3.9]
[3.4]
[14.4]
[19.5]
[7.5]
[3.3]
[3.2]
[3.9]
Meters
Feet
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
50 10 15 20 25 30 35 40 45 50
Meters Feet
0
2
1
4
3
6
5
-6
-4
-5
-2
-3
-1
8
7
10
9
12
11
14
13
16
15
17
0
5
10
15
20
25
30
-10
-5
-15
-20
35
40
45
50
55
60
Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO 10567 and do not exceed 75% or tipping and 87% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for 360° with machine support outriggers. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator’s & safety manual provided be Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.
K16-1ULM
Working Equipment K16-1 ULM
reach 50'11" (15.54 m)boom 29'10" (9.1 m)stick 21'8" (6.6 m) ULMboom pos. 1
Operator’s Cab
model E270 maXCab hydraulic elevating upeye level approx. 19' (5.8 m)
Undercarriage
model MP41E 4-point outriggerstires 4 x 12.00-24 solid rubber
machine shown in mirror image
Lift Capacities835 M “E”
SENNEBOGEN LLC 1957 Sennebogen TrailStanley, NC 28078, USA
Phone +1 (704) 347-4910Fax +1 (704) 347-8894Email [email protected]
835M
/E-0
315
“Under our policy of continuous improvements we reserve the right to change specifications, materials and design without prior notice. The illustrations shown may include optional equipment. See your SENNEBOGEN dealer for further information.” © 2015 SENNEBOGEN LLC, all rights reserved, printed in USA
GO FOR GREEN www.sennebogen-na.com
transport dimensions valid for boom position 1 only • boom bosition 2 may increase transport height & transport length • handrails, catwalks & other accessories are disassembled for transportation • *optional cab E300/260 will increase machine transport height by 2" (50 mm)
Reach Boom Length Stick Length Transport Length Transport Height H1* Transport Width
K16-1 29'10" (9,100 mm) 22'8" (6,900 mm) 44'4" (13,500 mm) 11'4" (3,450 mm) 9'10" (3,000 mm)
K18-1 33'2" (10,100 mm) 25'11" (7,900 mm) 47'7" (14,500 mm) 11'4" (3,450 mm) 9'10" (3,000 mm)
B18-1 35'5" (10,800 mm) 25'11" (7,900 mm) 49'3" (15,000 mm) 11'4" (3,450 mm) 9'10" (3,000 mm)
K16-1 ULM 29'10" (9,100 mm) 21'8" (6,600 mm) 44'4" (13,500 mm) 11'4" (3,450 mm) 9'10" (3,000 mm)
Transport dimensions
14'7" (4,465)9'8" (3,000)
16' (4,880)
1'0"
(290
)4" (120
)
9" (265
)9'8" (3,000)2'2"
(675)
12'1" (3,675)
11'3
" (3,
450)
8'7"
(2,6
50)
20' (
6,10
0)
10'8" (3,295)
4'10
" (1,2
50)
4'9"
(1,4
90)
8'10
" (2,
740)
1'4"
(410
)
10'5" (3,200)18' (5,500)
19'8" (6,025)