Leading Through Innovation - SENNEBOGEN · 4 Lift capacities are stated in pounds. Values in...
Transcript of Leading Through Innovation - SENNEBOGEN · 4 Lift capacities are stated in pounds. Values in...
Technical SpecificationsSENNEBOGEN Rubber Tired Material Handler
EngineModel Cummins QSL9, Tier 4 FinalNet Power 305 HP (224 kW)
Operating WeightM/rubber tired 116,845 lb (53,000 kg)
Leading Through InnovationReachstandard 56'6" (17.23 m) (stick pin)optional 62'8" (19.11 m) (stick pin)
Magnet Systemrating 25 kW
2 Subject to technical modification.
Technical Specifications 840 M “E”ENGINEmodel Cummins QSL9-C300type in-line, 6 cylinder,
cooled exhaust gas recirculation, water cooled
emission EPA Tier 4 Finalnet power 305 HP (224 kW) @ 2,000 rpminjection high pressure common-raildisplacement 8.9 L (543 cu.in.)bore 4.49 in (114 mm)stroke 4.69 in (145 mm)aspiration turbo charged, charge air cooledfuel tank 165 gal (625L)air filtration direct flow filtration system
dual stage filter with pre-filtercontrol integrated ECM
automatic idle - stop automaticeco mode
ELECTRICALalternator 24 V, 100 Ampstarter 24 V, 7.8 kWbattery 2 x 12 V, 150 Ahlights 2 x cab roof, type halogen
2 x frame upper carriage, type H4
HYDRAULIC SYSTEMsystem type loading sensing pilot pressure
controlled open centerpump type variable-displacement
axial-piston pumpmax. pump flow 196 gpm (740 l / m)max. pressure 5,076 psi (350 bar)hydraulic tank 132 gal (500 L)hydraulic system 180 gal (680 L)filtration dual filtration system
3 micron (HydroClean)
COOLINGcooling type cool-on-demand, suction-type
fan system, side by sidehydraulic / water hydraulic fan drive axial piston pump,
reversible fan thermo-statically controlled, closed loop system
charge air direct fan drive
WEIGHToperating weight 116,845 lb (53,000 kg)
SWING SYSTEMswing speed 0 - 8 rpmswing hydraulic open loopdrive 2 x axial piston motor
driving planetary gearbox, integrated brake valves
swing brake multidisc brake, spring loadedswing bearing external teeth, sealed ball bearingTRAVEL / UNDERCARRIAGEtype rubber tired MP42-Edrive system all-wheel drive
2 variable displacement motors direct mounted on each axle
travel speed 1st 0-6.8 mph (0-11.0 km/h)tires 8 x 14.00-24 (solid rubber)steering joystick steeringfront axle oscillating with hydraulic lock,
integrated safety check valvesrear axle fixedservice brake disc brakeparking brake wet, multi disc brake,
spring loadedsafety travel alarmREFILL CAPACITIESfuel tank 165 gal (625 L)engine cooling system 15.85 gal (60 L)engine oil w / filter 7.53 gal (28.5 L)hydraulic tank 132 gal (500 L)hydraulic system 180 gal (680 L)swing box 1.45 gal (5.5 L)axle hub (front axle) 1.24 gal (4.7 L) eachaxle hub (rear axle) 1.24 gal (4.7 L) eachaxle differential (front axle) 11.76 gal (44.5 L)axle differential (rear axle) 10.65 gal (40.3 L)axle drop box (front axle) 0.4 gal (1.5 L)axle drop box (rear axle) 0.4 gal (1.5 L)parking brake 0.16 gal (0.6 L)swing ring lubrication reservoir 0.26 gal (1.0 L)central lubrication reservoir 5.5 lb (2.5 kg)diesel exhaust fluid 7.93 gal (30 L)MAGNET SYSTEMrating 25 kWvoltage (magnetized) 230 Vcurrent (cold condition) 109 Ampscontroller Hubbellgenerator Baldordrive hydraulic
3Subject to technical modification.
Standard / Optional Equipment 840 M “E”
Standard Equipment Optional Equipment
ENGINEWater separator in fuel line Automatic idle / engine stop control Eco mode Visual fuel tank check Engine block & water separator pre-heater
ELECTRICBattery disconnect switch Centralized fuse box Battery jump start connection from ground level
HYDRAULICPilot pressure controlled variable displacement pump Thermostatically controlled cooling system Centralized hydraulic test ports Protection covers for pilot pressure control valves 3 micron dual filtration system Load sensing, flow on demand hydraulic system Optimized hydraulic pump regulation (GLR) Visual hydraulic tank check from ground level Attachments open, close & rotation hydraulics Hydraulic tank shut off valve Electrical hydraulic tank pre-heater Biodegradable hydraulic oil Hydraulic circuit for scrap shear Hydraulic circuit for hammer, breaker Hydraulic circuit for circuit slasher Additional hydraulic circuits Attachment return filtration filters (60 µm)
UPPER CARRIAGERearview & right side view camera system Automatic lubrication system Anti-slip mats on walking area Lockable side doors Handrails on top of upper carriage Mirror left side Turning signal lights in upper carriage frame Removable belly panels Additional light package Custom colors Seawater paint coating
SWING SYSTEM360° protection cover, removable Electrical driven swing gear pinion lubrication pump
OPERATOR’S CAB (maXCab)Hydraulic elevating cab system E260 Multi adjustable, air suspended operator‘s seat 3” (76 mm) seat belt Seat heater Automatic climate control (heater / AC) Air outlets w / defroster Storage area for lunch box Large cup holder Fire extinguisher Tinted windows with safety glass Door window as sliding window AM / FM Radio with CD player & speakers Removable floor mat SenCon diagnostic system Multicolor Monitor Tilt out front window Halogen light package on cab roof Mechanical hour meter Sliding door Catwalk w / handrail 12 V / 24 V power outlet Windshield wiper and washers
OPERATOR’S CAB (maXCab)Emergency exit hammer Safety lever Sun shades Interior lighting Rain cover front window Outside mirror Optical and acoustic warning system Positive filtered ventilation (pressurized cab) Safety check valves for elevating cab cylinder Foot rest maXCab industry Windshield protection guard Skylight protection guard Skylight FOPS protection guard Bullet proof windshield Bullet proof skylight Polycarbonate side windows Additional light package Fixed cab elevation Hydraulic elevating up and out cab E300/260 Operator’s cab with floor window Steering column instead of joystick steering Steering column in combination with joystick steering Additional cameras
UNDERCARRIAGERobust designed material handling undercarriage Heavy duty axles Solid rubber tires 14.00-24 (8x) incl. intermediate ring Front axle automatic oscillating w/axle unlock (travel position) Strong hydraulic motors, direct mounted to each axle Drive train protection guards Travel alarm Centralized lubrication points 2 circuit servo brake system 4-point outriggers w/integrated safety check valves in outrigger cylinders Tool and storage compartments, lockable Individual outrigger control Increased size outrigger pads to decrease ground pressure
WORKING EQUIPMENTPurpose built material handling boom Purpose built material handling stick Attachment hydraulic line connections with ball valves Boom position 1 Safety check valves for stick cylinders Safety check valves for boom cylinders Cylinder end position dumping Boom hoist limitation Bronze bushings connected to automatic lubrication system Stick & boom limitation Halogen light package boom Purpose built material handling stick with reversing linkage Purpose built material handling boom for scrap shears Boom position 2
MAGNET SYSTEMHydraulic driven generator Magnet controller Magnet suspension link
ATTACHMENTSOrange peel grapple Mag grapple Clamshell Magnet Log grapple Scrap shear Power attachment Pipe handler
4
Lift capacities are stated in pounds. Values in brackets [ ] are stated in metric tons. Indicated figures are based on ISO 10567 and do not exceed 75% or tipping and 87% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for 360° with machine support on outriggers. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lifting charts. Please contact SENNEBOGEN or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator’s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by SENNEBOGEN.
Working Equipment K17-1
reach 56'6" (17.23 m)boom 34'9" (10.6 m)stick 23'4" (7.1 m)boom pos. 1
Operator’s Cab
model E270 maXCab hydraulic elevating up 8'8" (2.65 m) elevationeye level approx. 19'8" (6.0 m)
Undercarriage
model MP42E 4-point outriggerstires 8 x 14.00-24 solid rubber
Lift Capacities840 M “E”
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
- 7
- 6
- 5
- 4
- 3
- 2
- 1
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
[14.2]
[23.7]
[2.4]
[7.9]
[12.4]
[15.8]
[17.3]
[18.4]
[8.5]
[5.4]
[5.0]
[5.3]
[8.1]
[9.0]
[9.7]
[10.4]
[11.3]
[12.4]
[13.0]
[13.7]
[14.3]
[14.5]
[14.1]
[10.1]
[9.0]
[8.9]
[6.8]
[8.1]
[9.1]
[10.0]
[10.4]
[10.7]
[11.0]
[11.4]
[11.7]
[11.8]
[11.7]
[11.2]
[10.3]
[9.0]
[6.9]
[8.2]
[9.1]
[9.2]
[9.3]
[9.5]
[9.7]
[9.9]
[9.9]
[9.8]
[9.4]
[8.8]
[7.8]
[6.5]
[6.8]
[8.0]
[8.2]
[8.3]
[8.4]
[8.5]
[8.6]
[8.5]
[8.4]
[8.0]
[7.5]
[6.7]
[5.5]
[6.3]
[7.4]
[7.4]
[7.5]
[7.5]
[7.5]
[7.4]
[7.2]
[6.9]
[6.4]
[5.6]
[5.3]
[6.7]
[6.7]
[6.6]
[6.6]
[6.4]
[6.2]
[5.9]
[5.3]
[4.5]
[4.8]
[5.8]
[5.7]
[5.5]
[5.2]
[4.8]
[4.2]
Meters
Meters Feet
Feet 50 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80
0
5
10
15
20
25
30
-10
-5
-15
-20
-25
35
40
45
50
55
60
65
31,305
52,249
5,291
17,416
27,337
34,833
38,140
40,565
18,739
11,905
11,023
11,684
1 7,857
1 9,841
21,385
22,928
24,912
27,337
28,660
30,203
31,526
31,967
31,085
22,266
19,841
19,621
14,991
17,857
20,062
22,046
22,928
23,589
24,251
25,132
25,794
26,014
25,794
24,692
22,707
19,841
15,212
18,078
20,062
20,282
20,503
20,944
21,385
21,826
21,826
21,605
20,723
19,400
17,196
14,330
14,991
17,637
18,078
18,298
18,519
18,739
18,960
18,739
18,519
17,637
16,535
14,771
12,125
13,889
16,314
16,314
16,535
16,535
16,535
16,314
15,873
15,212
14,109
12,346
11,684
14,771
14,771
14,550
14,550
14,109
13,669
13,007
11,684
9,921
10,582
12,787
12,566
12,125
11,464
10,582
9,259
K17-1
I.06102008151743machine shown in mirror image
5
Lift capacities are stated in pounds. Values in brackets [ ] are stated in metric tons. Indicated figures are based on ISO 10567 and do not exceed 75% or tipping and 87% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for 360° with machine support on outriggers. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lifting charts. Please contact SENNEBOGEN or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator’s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by SENNEBOGEN.
Working Equipment K18-1
reach 59'3" (18.06 m)boom 34'9" (10.6 m)stick 26'3" (8.0 m)boom pos. 1
Operator’s Cab
model E270 maXCab hydraulic elevating up eye level approx. 19'8" (6.0 m)
Undercarriage
model MP42E 4-point outriggerstires 8 x 14.00-24 solid rubber
Lift Capacities840 M “E”
34,392
54,233
9,480
5,952
6,173
7,275
25,794
36,155
39,021
39,903
16,314
12,566
12,125
12,566
14,991
16,975
21,385
23,369
27,337
29,101
30,644
31,526
31,746
27,117
21,605
20,062
20,062
12,125
15,212
16,975
18,298
19,621
21,164
22,487
23,369
24,251
25,132
25,794
25,794
25,132
23,810
21,385
18,298
12,566
14,991
16,975
18,519
19,400
19,841
20,282
20,944
21,385
21,605
21,605
21,164
20,062
18,298
15,873
12,346
14,771
16,755
17,416
17,637
18,078
18,298
18,519
18,739
18,519
18,078
16,975
15,653
13,448
11,684
14,330
15,873
15,873
16,094
16,314
16,314
16,314
16,094
15,432
14,550
13,228
11,243
10,362
13,007
14,550
14,550
14,550
14,550
14,330
13,889
13,448
12,346
11,023
9,039
10,362
12,566
13,007
12,787
12,566
11,905
11,243
10,141
8,598
9,700
9,921
[15.6]
[24.6]
[4.3]
[2.7]
[2.8]
[3.3]
[11.7]
[16.4]
[17.7]
[18.1]
[7.4]
[5.7]
[5.5]
[5.7]
[6.8]
[7.7]
[9.7]
[10.6]
[12.4]
[13.2]
[13.9]
[14.3]
[14.4]
[12.3]
[9.8]
[9.1]
[9.1]
[5.5]
[6.9]
[7.7]
[8.3]
[8.9]
[9.6]
[10.2]
[10.6]
[11.0]
[11.4]
[11.7]
[11.7]
[11.4]
[10.8]
[9.7]
[8.3]
[5.7]
[6.8]
[7.7]
[8.4]
[8.8]
[9.0]
[9.2]
[9.5]
[9.7]
[9.8]
[9.8]
[9.6]
[9.1]
[8.3]
[7.2]
[5.6]
[6.7]
[7.6]
[7.9]
[8.0]
[8.2]
[8.3]
[8.4]
[8.5]
[8.4]
[8.2]
[7.7]
[7.1]
[6.1]
[5.3]
[6.5]
[7.2]
[7.2]
[7.3]
[7.4]
[7.4]
[7.4]
[7.3]
[7.0]
[6.6]
[6.0]
[5.1]
[4.7]
[5.9]
[6.6]
[6.6]
[6.6]
[6.6]
[6.5]
[6.3]
[6.1]
[5.6]
[5.0]
[4.1]
[4.7]
[5.7]
[5.9]
[5.8]
[5.7]
[5.4]
[5.1]
[4.6]
[3.9]
[4.4]
[4.5]
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24Meters
Feet 50 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80
- 7
- 6
- 8
- 5
- 4
- 3
- 2
- 1
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Meters Feet
0
5
10
15
20
25
30
-10
-5
-15
-20
-25
35
40
45
50
55
60
65
machine shown in mirror image
K18-1
I.02102008155514
6
Lift capacities are stated in pounds. Values in brackets [ ] are stated in metric tons. Indicated figures are based on ISO 10567 and do not exceed 75% or tipping and 87% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for 360° with machine support on outriggers. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lifting charts. Please contact SENNEBOGEN or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator’s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by SENNEBOGEN.
Working Equipment K19-1
reach 62'8" (19.11 m)boom 38'5" (11.7 m)stick 26'3" (8.0 m)boom pos. 1
Operator’s Cab
model E270 maXCab hydraulic elevating up 8'8" (2.65 m) elevationeye level approx. 19'8" (6.0 m)
Undercarriage
model MP42E 4-point outriggerstires 8 x 14.00-24 solid rubber
Lift Capacities840 M “E”
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22Meters
Feet 50 10 15 20 25 30 35 40 45 50 55 60 65 70 75
Meters Feet
0
5
10
15
20
25
30
-10
-5
-15
-20
-25
35
40
45
50
55
60
65
-30
70
- 7
- 9
- 10
- 6
- 8
- 5
- 4
- 3
- 2
- 1
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
21
22
2014,110[6.4]
16,535[7.5]
14,551[6.6]
16,535[7.5]
14,771[6.7]
12,346[5.6]
17,857[8.1]
16,535[7.5]
14,771[6.7]
11,905[5.4]
19,180[8.7]
18,298[8.3]
16,535[7.5]
14,330[6.5]
11,023[5.0]
20,723[9.4]
18,519[8.4]
16,535[7.5]
14,771[6.7]
13,448[6.1]
9,259[4.2]
21,605
[9.8]
22,708
[10.3]
18,960
[8.6]16,755
[7.6]
14,771[6.7]
13,448[6.1]
11,905[5.4]
22,267[10.1]
26,015[11.8]
24,471[11.1]
19,180[8.7]
16,755[7.6]
14,911[6.8]
13,448[6.1]
11,905[5.4]
8,818[4.0]
22,928[10.4]
27,337[12.4]
32,408[14.7]
28,660[13.0]
19,621[8.9]
16,976[7.7]
14,991[6.8]
13,448[6.1]
11,905[5.4]
10,582[4.8]
23,589[10.7]
28,660[13.0]
36,376[16.5]
50,486[22.9]
19,842[9.0]
17,196[7.8]
14,991[6.8]
13,448[6.1]
11,905[5.4]
10,362[4.7]
23,810[10.8]
29,321[13.3]
37,920[17.2]
20,062[9.1]
17,196[7.8]
14,991[6.8]
13,228[6.0]
11,684[5.3]
10,141[4.6]
24,030[10.9]
29,542[13.4]
11,684[5.3]
20,062[9.1]
17,196[7.8]
14,771[6.7]
13,007[5.9]
11,464[5.2]
9,700[4.4]
23,369[10.6]
19,621[8.9]
7,937[3.6]
19,621[8.9]
16,755[7.6]
14,551[6.6]
12,566[5.7]
11,023[5.0]
9,259[4.2]
22,267[10.1]
15,212[6.9]
7,716[3.5]
18,739[8.5]
16,094[7.3]
13,889[6.3]
11,905[5.4]
10,362[4.7]
8,598[3.9]
20,503[9.3]
13,889[6.3]
8,378[3.8]
17,417[7.9]
14,991[6.8]
13,007[5.9]
11,023[5.0]
9,480[4.3]
7,496[3.4]
17,857[8.1]
14,110[6.4]
15,653[7.1]
13,669[6.2]
11,684[5.3]
9,921[4.5]
8,157[3.7]
6,173[2.8]
14,991[6.8]
13,228[6.0]
11,684[5.3]
9,920[4.5]
8,157[3.7]
12,125[5.5]
K19-1
machine shown in mirror image I.20131205145733
7
Lift capacities are stated in pounds. Values in brackets [ ] are stated in metric tons. Indicated figures are based on ISO 10567 and do not exceed 75% or tipping and 87% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for 360° with machine support on outriggers. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lifting charts. Please contact SENNEBOGEN or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator’s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by SENNEBOGEN.
Working Equipment B18-1
reach 59' (17.99 m)boom 36'1" (11.0 m)stick 26'3" (8.0 m)boom pos. 1
Operator’s Cab
model E300/260 maXCab hydraulic elevating up
& out (optional item)eye level approx. 20'4" (6.2 m)
Undercarriage
model MP42E 4-point outriggerstires 4 x 14.00-24 solid rubber
42,549
70,106
8,818
6,393
6,834
7,937
9,039
31,746
35,053
28,219
14,991
12,346
11,905
12,125
12,787
23,810
25,573
27,337
28,880
29,542
23,369
19,400
18,078
18,078
18,519
10,362
18,739
19,400
20,282
21,385
22,487
23,369
24,030
24,030
23,369
22,046
20,282
17,857
11,023
13,669
15,873
16,535
16,755
17,196
17,857
18,519
19,180
19,841
20,062
20,062
19,621
18,739
17,416
15,432
11,023
13,669
14,991
15,212
15,432
15,873
16,314
16,755
17,196
17,196
17,196
16,755
16,094
14,991
13,228
10,582
13,007
13,889
14,109
14,330
14,550
14,771
14,991
14,991
14,991
14,550
13,889
12,787
11,243
9,259
11,905
13,007
13,007
13,228
13,228
13,448
13,228
13,228
12,787
11,905
10,803
9,259
9,480
11,684
11,905
11,905
11,905
11,905
11,464
11,023
10,141
[14.4][19.3]
[31.8]
[4.0]
[2.9]
[3.1]
[3.6]
[4.1]
[15.9]
[12.8]
[6.8]
[5.6]
[5.4]
[5.5]
[5.8]
[10.8]
[11.6]
[12.4]
[13.1]
[13.4]
[10.6]
[8.8]
[8.2]
[8.2]
[8.4]
[8.5]
[8.8]
[9.2]
[9.7]
[10.2]
[10.6]
[10.9]
[10.9]
[10.6]
[10.0]
[9.2]
[8.1]
[5.0]
[6.2]
[4.7]
[7.2]
[7.5]
[7.6]
[7.8]
[8.1]
[8.4]
[8.7]
[9.0]
[9.1]
[9.1]
[8.9]
[8.5]
[7.9]
[7.0]
[5.0]
[6.2]
[6.8]
[6.9]
[7.0]
[7.2]
[7.4]
[7.6]
[7.8]
[7.8]
[7.8]
[7.6]
[7.3]
[6.8]
[6.0]
[4.8]
[5.9]
[6.3]
[6.4]
[6.5]
[6.6]
[6.7]
[6.8]
[6.8]
[6.8]
[6.6]
[6.3]
[5.8]
[5.1]
[4.2]
[5.4]
[5.9]
[5.9]
[6.0]
[6.0]
[6.1]
[6.0]
[6.0]
[5.8]
[5.4]
[4.9]
[4.2]
[4.3]
[5.3]
[5.4]
[5.4]
[5.4]
[5.4]
[5.2]
[5.0]
[4.6]
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24Meters
Feet 50 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80
- 7
- 8
- 9
- 10
- 6
- 5
- 4
- 3
- 2
- 1
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Meters Feet
0
5
10
15
20
25
30
-10
-5
-15
-20
-25
35
40
45
50
55
60
-30machine shown in mirror image
B18-1
Lift Capacities840 M “E”
I.02102008134628
SENNEBOGEN LLC1957 Sennebogen TrailStanley, NC 28078, USA
Phone +1 (704) 347-4910Fax +1 (704) 347-8894Email [email protected]
840M
/E-0
315
“Under our policy of continuous improvements we reserve the right to change specifications, materials and design without prior notice. The illustrations shown may include optional equipment. Always refer to the appropriate Operation and maintenance manual for specific product information. See your local SENNEBOGEN dealer for further information.” © 2015 SENNEBOGEN LLC, all rights reserved
GO FOR GREEN www.sennebogen-na.com
Reach Boom Length Stick Length Transport Length Transport Height* Transport Width
K17-1 34'9" (10,600 mm) 23'4" (7,100 mm) 49'3" (15,000 mm) 12’ (3,650 mm) 11'6" (3,500 mm)
K18-1 34'9" (10,600 mm) 26'3" (8,000 mm) 49'3" (15,000 mm) 12' (3,650 mm) 11'6" (3,500 mm)
K19-1 38'5" (11,700 mm) 26'3" (8,000 mm) 51'6" (15,700 mm) 12' (3,650 mm) 11'6" (3,500 mm)
B18-1 36'1" (11,000 mm) 26'3" (8,000 mm) 50'2" (15,300 mm) 12' (3,650 mm) 11'6" (3,500 mm)
Transport dimensions
12’ (
3,65
0)8’
7”(2
,650
)20
’8”
(6,3
00)
11’ (3,340)
5’6”
(1,6
85)
11’10” (3,600)20’4” (6,205)22’5” (6,825)
2’2” (675)12’1” (3675)
7.7”
(195
)
11.8” (300) 12.4” (315)
9’8” (3,000)
11’5” (3,480)16’7” (5,050)18’4” (5,575)
transport dimensions only valid for boom position 1 only • boom position 2 may increase transport height & transport length • handrails, catwalks & other accessories are disassembled for transportation • *optional cab E300/260 will increase machine transport height by 2” (50 mm)
53’4” (16,278)
13’8
” (4
,195)
12’ (
3,64
8)