LCD Display Wall

[LM55P4]

LCD Display Wall

S-188-9-CA505-A 2001(IP)

HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPANwww.MitsubishiElectric.com/bu/displaywall

n LCD technology is susceptible to imagine persistence when showing the same static image for long periods of time.n Service parts for this product are only stocked for five years after model production is discontinued. n HDMI, the HDMI logo and High-Definition MultiMedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.n Intel® is a registered trademark of Intel Corporation in the U.S. and other countries.n DisplayPortTM is a trademark of the Video Electronics Standards Association, registered in the U.S. and other countries.n All information contained herein is subject to change without prior notice.n Other brand, product, and service names are trademarks or registered trademarks of the respective companies.n Product appearance in this brochure does not imply that Mitsubishi Electric Corporation intends to make it available in all countries where the company and its subsidiaries operate.n Screen displays of the photographs in this brochure are simulated images only.n Repairs or exchanges related to the deterioration of LCD due to continuous operation and panel aging, such as brightness or color changes, after-image retention or burn-in and the like, are not covered under warranty.n HD Base T TM is a registered trademark of HD Base T Alliance.

Connector Terminals

1 Display portTM out

2 USB

4 DVI-D in

5 HDMI in

3 Remote in

7 D-SUB in

8 RC-232C connector

9 LAN connector

10 Remote out

6 Display portTM in

4 5 6 7 8 9 10

1

2

3

Specification

Dimensions (W × H × D)Screen surface treatment Bezel width Display resolution Screen size

Backlight

Viewing angle (H / V)

Maximum stack height

Brightness

Contrast ratio Display colors Image signal terminals

Control signals

Optional input board slot Power consumption (without OPS)Voltage range Weight

Conndition for operation

TypeLifetime

Landscape PortraitHigh brightStandardPanel saving mode

Input

Output

High brightStandard

1210.7 mm / 681.4 mm / 98.0 mm (excluding handles) (47.7 × 26.8 × 3.9")Anti-glare (haze 28 %)

0.44mm (min.) *1

Full HD (1920 × 1080 pixels)55" diagnoalLED (Direct)

100.000 hours *2

Horizontal 178°/ Vertical 178° (CR>10)6 units3 units

700 cd/m2 (typ.)500 cd/m2 (typ.)450 cd/m2 (typ.)1,100 : 1 (typ.)

1.07 Billion (10-bit)Display portTM (1.2a, HDR supportted) x1, HDMI (HDR supported) x1

DVI-D (with HDCP) x1, D-Sub 15 x1DisplayPortTM (1.2a) x1 *3

LAN: RJ45 (10BASE-T/100BASE-TX), RS-232C: 2.5 mm phone jack, Wired remote: 3.5 mm phone jack, IR receiver

Intel® OPS slot ×1250 W (typ.)180 W (typ.)

AC 100 - 240 V 10%, 50/60 Hz ± 1Hz24.0 kg / 52.9 lbs

5 - 35 °C (41 °F - 95 °F) 20 - 80 % RH non-condensing

LM55P4

Dimensions

Model

Unit: mm

*1: To configure multi-monitors, install them as adjacent monitors don’t touch each other.*2: In panel saving mode. It will be 60,000 hours in other modes. No image staining occures even in 24-hours operation, although the image persistence

would still happen if a static image is displyaed for a long terms. *3: HDR is not supported. To display an HDR content across multiple monitors, input the signal separately to each monitor with a matrix switcher or a

distribution amplifier.

Options

3G SDI BoardDP-1SDI-3G

Long-distance transmissionsupporting HDBaseT via aCAT6(STP) cable is possible.

VC-LM1HDRemote controllerwith an IR sensor cable

DP-02RK

IR sensor cable

New publication effective Jan. 2020.Specifications are subject to change without notice.

1210.7

681.

4

98

Razor-thin narrow bezel all but erases the joints between screens in multi-screen setups.

LCD displays with a bezel width of 0.44mm have been realized.The narrow bezel all but erases the joints that inevitably appear in multi-screen setups, to deliver virtually seamless image displays.

High Definition. High Contrast. Razor-thin narrow bezel smoothly integrateinto multi-screen applications creating virtually seamless images.

Evolving large-screen imaging systems for today's visual information society.Mitsubishi Electric multi-screen displays contribute to ensuring the smooth flowof information in public spaces such as airports and train stations.

0.44mm

0.44mm

Frame compensation off

without side seal

Frame compensation on

* DS280 is product of Advantech, Co., Ltd. Please contact the nearest dealership.

Tiling compatibility withframe compensation

Frame compensation supports up to 225 displays in 15×15 configuration to avoid image distortion at the seams, ensuring image accuracy when spread across multiple screen displays.

Equipped with Intel® OPS SlotLM55P4 is equipped with an Open Pluggable Specif ication (OPS) slot. Simply install the optional computer board* to expand the scope of applications. A variety of peripheral equipment can be connected quickly and easily.

Dynamic brightness balance ensuresuniformity over the life of your display wall

Mitsubishi Electric pioneered and developed Multi-Vision balancing technology and incorporates in all display walls, ensuring internal sensors and inter-screen communication functions work harmoniously to enable uniform brightness and balanced displays across multiple screens.

Full HD, LED-backlit LCD Panelswith Razor-thin narrow bezel

Commercial-grade LED-backlit panels with high brightness and contrast. The panels also feature an Razor-thin narrow bezel that minimises image content loss, a critical factor in multi-screen applications.

Other Features • Local dimming• Scheduling

* Recommended PC: DS280 (i7-6822EQ, 4+4 GB DDR4, SSD, Win10 IoT) / Advantech Co., Ltd.

•Digital zoom•Screen saver

•Panel saving mode•Connectability with an OPS-compliant PC*

Reverse scan Reverses direction of image scanning to smoothly play enlarged video on multiple displays.

Reverses scan mode off Reverses scan mode on

As shown by the grey line, brightness is controlled continuously across all four screens.

Adjustment time

4-screen multi-image example

50%

100%

Brightness

LCD Display Wall

[LM55P4]

LCD Display Wall

S-188-9-CA505-A 2001(IP)

HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPANwww.MitsubishiElectric.com/bu/displaywall

n LCD technology is susceptible to imagine persistence when showing the same static image for long periods of time.n Service parts for this product are only stocked for five years after model production is discontinued. n HDMI, the HDMI logo and High-Definition MultiMedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.n Intel® is a registered trademark of Intel Corporation in the U.S. and other countries.n DisplayPortTM is a trademark of the Video Electronics Standards Association, registered in the U.S. and other countries.n All information contained herein is subject to change without prior notice.n Other brand, product, and service names are trademarks or registered trademarks of the respective companies.n Product appearance in this brochure does not imply that Mitsubishi Electric Corporation intends to make it available in all countries where the company and its subsidiaries operate.n Screen displays of the photographs in this brochure are simulated images only.n Repairs or exchanges related to the deterioration of LCD due to continuous operation and panel aging, such as brightness or color changes, after-image retention or burn-in and the like, are not covered under warranty.n HD Base T TM is a registered trademark of HD Base T Alliance.

Connector Terminals

1 Display portTM out

2 USB

4 DVI-D in

5 HDMI in

3 Remote in

7 D-SUB in

8 RC-232C connector

9 LAN connector

10 Remote out

6 Display portTM in

4 5 6 7 8 9 10

1

2

3

Specification

Dimensions (W × H × D)Screen surface treatment Bezel width Display resolution Screen size

Backlight

Viewing angle (H / V)

Maximum stack height

Brightness

Contrast ratio Display colors Image signal terminals

Control signals

Optional input board slot Power consumption (without OPS)Voltage range Weight

Conndition for operation

TypeLifetime

Landscape PortraitHigh brightStandardPanel saving mode

Input

Output

High brightStandard

1210.7 mm / 681.4 mm / 98.0 mm (excluding handles) (47.7 × 26.8 × 3.9")Anti-glare (haze 28 %)

0.44mm (min.) *1

Full HD (1920 × 1080 pixels)55" diagnoalLED (Direct)

100.000 hours *2

Horizontal 178°/ Vertical 178° (CR>10)6 units3 units

700 cd/m2 (typ.)500 cd/m2 (typ.)450 cd/m2 (typ.)1,100 : 1 (typ.)

1.07 Billion (10-bit)Display portTM (1.2a, HDR supportted) x1, HDMI (HDR supported) x1

DVI-D (with HDCP) x1, D-Sub 15 x1DisplayPortTM (1.2a) x1 *3

LAN: RJ45 (10BASE-T/100BASE-TX), RS-232C: 2.5 mm phone jack, Wired remote: 3.5 mm phone jack, IR receiver

Intel® OPS slot ×1250 W (typ.)180 W (typ.)

AC 100 - 240 V 10%, 50/60 Hz ± 1Hz24.0 kg / 52.9 lbs

5 - 35 °C (41 °F - 95 °F) 20 - 80 % RH non-condensing

LM55P4

Dimensions

Model

Unit: mm

*1: To configure multi-monitors, install them as adjacent monitors don’t touch each other.*2: In panel saving mode. It will be 60,000 hours in other modes. No image staining occures even in 24-hours operation, although the image persistence

would still happen if a static image is displyaed for a long terms. *3: HDR is not supported. To display an HDR content across multiple monitors, input the signal separately to each monitor with a matrix switcher or a

distribution amplifier.

Options

3G SDI BoardDP-1SDI-3G

Long-distance transmissionsupporting HDBaseT via aCAT6(STP) cable is possible.

VC-LM1HDRemote controllerwith an IR sensor cable

DP-02RK

IR sensor cable

New publication effective Jan. 2020.Specifications are subject to change without notice.

1210.7

681.

4

98