LC Calendar 2006-07 · 6 Basic overview of PROFIBUS and HART Setup and commissioning of PROFIBUS...
Transcript of LC Calendar 2006-07 · 6 Basic overview of PROFIBUS and HART Setup and commissioning of PROFIBUS...
Siemens Milltronics Learning Centertechnical instrumentation courses
training
The Siemens Milltronics Learning Center provides you with the in-depth, interactive product and market training you need. Thecourses are designed to develop knowledgeable, highly-productivesales and technical staff. Courses are held at the SiemensMilltronics manufacturing facility in Peterborough, Ontario,Canada.
The value of knowledgeSiemens Milltronics customers say our key strengths are productsupport and applications expertise. Solid training in products andapplications is a wise investment for any instrumentationprofessional. It enables you to:
- solve customer problems
- enhance customer satisfaction
- reduce product returns or misapplications
- increase sales and maximize opportunities with customers
Courses
Courses link the classroom to the real world by combining thefollowing learning practices:
Tutorial Instructors provide background information about technologyand applications.
DemonstrationInstructors demonstrate equipment and systems.
Hands-on
Participants operate the equipment and troubleshoot real-world problems.
Instructors
Instructors at the Siemens Milltronics Learning Center areaccomplished product and market experts with a combination oftechnical knowledge and field experience.
Assessment for certificate
Upon successful completion of a test or skills assessment,participants receive a course certificate.
Course enrollment and fee
The fee covers course tuition, all course materials, lunches andrefreshments. Participants are responsible for their own travel,living arrangements, and expenses. Siemens Milltronics willprovide information about hotels, restaurants, and localactivities. Registrations are accepted on a “first come, firstserved” basis. Space is limited to 12 students per class. Werecommend you register early to avoid disappointment.Siemens Milltronics reserves the right to cancel or reschedulecourses, and may provide additional courses to meet demand.
Information and registrationSiemens Milltronics Learning Center1954 Technology DrivePeterborough, ON Canada K9J 7B1
Phone: 705-740-7650
Fax: 705-745-5259email: [email protected]/instrumentation/training/canada
2
New this yearWe are excited to announce the addition of two courses to thisyear’s schedule. As a result of student requests, we now offerIntroduction to Flow, Temperature, Pressure, and PositionerTechnology and Introduction to PROFIBUS and SIMATIC PDM.These courses have been designed specifically for salesrepresentatives and distributors who work with customers usingthese technologies.
Water and wastewater trainingCertified by the Ontario Environmental Training Consortium,the Learning Center offers water and wastewater operatorswith the latest instrumentation and application training insupport of the Water and Wastewater Operator LicensingProgram. Please refer to pages 9 through 11 for courseinformation.
Enhance customer service with factory certified training
Course contents
3
A comprehensiveoverview of level meas-urement technologiesand techniques. Learnabout ultrasonic, radar,and capacitance tech-nologies and their com-mon applications.Understand how to selectthe correct technologysolution for a customer’sapplication.
Learn about the SiemensMilltronics level measure-ment product line,including communica-tions capabilities, remoteinventory monitoring,and support software.Learn tips and techniquesfor establishing good cus-tomer relationships andmaximizing sales.
Who benefits
Sales and service personnel, and new employees who serve customersusing the instruments.
Prerequisites
Some knowledge and experience in industrial applications.
Duration
4.5 days Monday to Thursday, 9:00 a.m. to 5:00 p.m.Friday 9:00 a.m. to 12:00 p.m.
Fee
$920 Cdn / $825 US / € 660 (includes applicable taxes)
T-1: Level measurement technology
Principles of level measurementThe level measurement marketTour of manufacturing facilityTechnologies comparison
Matching technology with application
Ultrasonic technology■ How it works■ Instruments, including:
SITRANS® Probe LU, MultiRanger®,Point level controllers, transducers andacccessories
■ Applications■ Installation basics■ Support software: Sonic
Intelligence®, Dolphin Plus, Sonex
Radar technology■ How it works■ Pulse, FMCW, 2-wire■ Power, frequency, and cost■ SIMATIC® PDM■ Instruments including:
SITRANS Probe LR, SITRANS LR 200,SITRANS LR 300, SITRANS LR 400
■ Applications■ Installation basics
Capacitance technology■ How it works■ Instruments including:
Point level, Pointek® CLS 100, PointekCLS 200 with PROFIBUS PA,Continuous level, SITRANS LC 500
■ Applications
Mechanical devices for level measurement
Communications
Remote inventory monitoring
Assessing needs and recommending solutions in the field
Elements of customer satisfaction
Navigating the intranet
Assessment for certificate
Introductory courses
MultiRanger, Pointek, and Sonic Intelligence, are registered trademarks of Siemens MilltronicsProcess Instruments Inc. SIMATIC and SITRANS are registered trademarks of Siemens AG.
Dates Register by
September 11 – 15, 2006 August 25, 2006
November 6 – 10, 2006 October 20, 2006
February 26 – March 2, 2007 February 9, 2007
April 16 – 20, 2007 March 30, 2007
4
A comprehensive overview of weighing and feeding equipment,including belt scales, weighfeeders, flowmeters, and integrators, as wellas speed and acoustic sensors. Learn the principles of installation andoperation.
Who benefitsSales and service personnel, and new employees who serve customersusing the instruments.
PrerequisitesSome knowledge and experience in the weighing and feedingtechnology field.
Duration
4.5 daysMonday to Thursday, 9:00 a.m. to 5:00 p.m.Friday 9:00 a.m. to 12:00 p.m.
Fee$920 Cdn / $825 US / € 660 (includes applicable taxes)
T-2: Weighing and feeding technology
Assessing the site
Belt scales■ How to select■ How to install■ Maintenance and troubleshooting
Weighfeeders■ Types and application
Flowmeters■ Types and application
Process protection■ Advantages
Motion sensors and their application
Acoustic sensors and their application
Communications
Assessing needs and recommending solutions in the field
Elements of customer satisfaction
Navigating the intranet
Assessment for certificate
Dates Register by
October 16 – 20, 2006 September 29, 2006
February 5 – 9, 2007 January 19, 2007
June 11 – 15, 2007 May 25, 2007
Course contents
Introductory courses
5
A comprehensive overview of flow, pressure, temperature, and positionertechnologies, including general pressure transmitter terminology,pressure and temperature theory, valve positioning and flowmeasurement. Learn the principles of installation and operation.
Who benefits
Sales and service personnel, and new employees who serve customersusing the instruments.
Prerequisites
Some knowledge and experience in industrial applications.
Duration4.5 daysMonday to Thursday, 9:00 a.m. to 5:00 p.m.Friday 9:00 a.m. to 12:00 p.m.
Fee
$920 Cdn / $825 US / € 660 (includes applicable taxes)
Dates Register by
October 2 – 6, 2006 September 15, 2006
January 15 – 19, 2007 January 2, 2007
May 14 – 18, 2007 April 27, 2007
Introduction to pressure measurement■ Pressure technology and
terminology■ Pressure Theory and transmitter design■ Remote seals■ Diagnostics■ Competitors■ Applications
Introduction to positioners ■ Principles and technology■ Positioner terminology■ Common applications■ Diagnostics■ Setup and access
Introduction to temperature measurement ■ Principles and technology■ Temperature terminology■ Diagnostics
Introduction to flow measurement■ Theory, history, and terminology■ Flow markets and applications■ Coriolis theory and history■ Coriolis applications■ Instruments including:
SITRANS FM flowmeters SITRANS FC flowmetersMASSFLO and SITRANS F US
■ Installation
Communications
Remote inventory monitoring
Assessing needs and recommending solutions in the field
Elements of customer satisfaction
Navigating the intranet
Assessment for certificate
NEW
T-3: Introduction to flow, temperature, pressure, and positioner technology
Course contents
Introductory courses
6
■ Basic overview of PROFIBUS and HART
■ Setup and commissioning of PROFIBUS
networks
■ Troubleshooting PROFIBUS
■ Device profiles
■ Sales advantages of PROFIBUS
■ Connection of field devices
■ Engineering with SIMATIC PDM
■ Functions of the PCS 7 Asset Management
■ Hands-on SIMATIC PDM
■ Parameterization of field instruments
■ Maintenance and diagnostics
■ Sales advantages of PDM
A comprehensive overview of PROFIBUS, SIMATIC Process DeviceManager (PDM), and HART® technologies. The ideal training course forsales and service personnel, and new employees who serve customersusing PROFIBUS or SIMATIC PDM.
Who benefits
Sales and service personnel who serve customers using the instruments.
Prerequisites
Some knowledge and experience in industrial applications.
Duration
3 daysWednesday, Thursday, and Friday, 9:00 a.m. to 5:00 p.m.
Fee$600 Cdn / $535 US / € 430(includes applicable taxes)
T-4: Introduction to PROFIBUS and SIMATIC PDM
Dates Register by
September 6 – 8, 2006 August 25, 2006
November 1 – 3, 2006 October 20, 2006
February 21 – 23, 2007 February 2, 2007
Course contents
Introductory courses
NEW
HART is a registered trademark of HART Communication Foundation
Dates Register by
November 13 – 16, 2006 October 27, 2006
April 23 – 26, 2007 April 5, 2007
In-depth and hands-on training on ultrasonic level measurementinstruments, including installation, programming, and troubleshooting.Learn how to assess and solve problems. Conduct detailed analysis ofecho profiles and learn how to interpret them. View demonstrations andparticipate in practice labs on Probe LU, MultiRanger, SITRANS LUC500,and other level measurement instruments.
Who benefits
Staff who install or service these instruments for customers; technicalsupport personnel.
PrerequisitesT-1 Level Measurement Technology or proven experience in levelmeasurement.
Duration4 daysMonday to Thursday 9:00 a.m. to 5:00 p.m.
Fee$920 Cdn / $825 US / € 660
(includes applicable taxes)
A-1: Advanced ultrasonics
Assessing an installation■ Vessel types■ Roof and bottom style■ Vessel contents’ effect on signal■ Temperature and pressure■ Internal obstructions
Selecting the right configuration for application
Reference guide for parameter settings for different materials:
■ flour■ aggregates■ liquids■ sugar■ pellets
Safety considerations
Troubleshooting an installation■ Solving problems on site■ Common misapplications
Correct installation and mounting techniques
Process connections and accessories
Programming■ Beyond the quick start parameters
How to read echo profiles
Diagnostic tools■ Sonic Intelligence■ Dolphin Plus■ SIMATIC PDM■ Improve performance using diagnostics
Remote inventory monitoring ■ Levelwatch.com
Advanced systems workshop ■ MultiRanger, SITRANS LU 10, LUC500
Advanced troubleshooting workshop
Assessment for certificate
7
Course contents
Advanced courses
8
A-2: Advanced radar
Dates Register by
September 18 – 22, 2006 September 1, 2006
March 5 – 9, 2007 February 16, 2007
Assessing an installation■ Vessel types■ Roof and bottom style■ Vessel contents’ effect on signal■ Temperature and pressure■ Internal obstructions
Selecting the right configuration for the application
Safety considerations
Troubleshooting an installation■ Solving problems on site■ Common misapplications
Correct installation and mounting techniques
Process connections and accessories
Programming
Diagnostic tools■ SIMATIC PDM■ Improve performance using diagnostics
Communications
Remote monitoring
Advanced troubleshooting workshop
Assessment for certificate
In-depth and hands-on training on radar level measurement instruments,including installation, programming, and troubleshooting. Learn how toconfigure the right solution for an application using process connectionsand antenna options. Learn how to assess and solve problems and howto work with the Configuration Center for custom installations. Conductdetailed analysis of profiles and learn how to interpret them. Viewdemonstrations and participate in practice labs on SITRANS Probe LR,SITRANS LR 200, SITRANS LR 300, and SITRANS LR 400.
Who benefits
Staff who install or service radar instruments for customers; technicalsupport personnel.
Prerequisites
T-1 Level Measurement Technology or proven experience in levelmeasurement technology.
Duration4.5 daysMonday to Thursday 9:00 a.m. - 5:00 p.m.Friday 9:00 a.m. to 12:00 p.m.
Fee$920 Cdn / $825 US / €660 (includes applicable taxes)
Course contents
Advanced courses
9
Water and wastewater coursesThe Siemens Milltronics Learning Center offers fourcourses certified by the Ontario EnvironmentalTraining Consortium (OETC) in support of the Waterand Wastewater Operator Licensing Program. Weoffer state-of-the art technical instruction,combining hands-on practical application andtheory with the latest in high-tech instrumentation.Our instructors are experienced applicationengineers and support specialists with extensiveknowledge of water and wastewater operationsthroughout Canada. To maximize learning, allcourses are limited to 12 participants per session.
Who benefitsWater and wastewater operators who are requiredto fulfill the OETC CEU requirements, in addition tosales and service personnel, and new employeeswho serve customers using the instruments.
OETC approved courses
SM-1a: Setting up dual pumping applications
SM-1b: Open channel flow measurement principles
SM-2: Water/wastewater plant level control
SM-3: Data communications
OETC approved courses
10
SM -1a: Setting up dual pumping applications (0.5 CEUs)(
Sound knowledge of principles and necessarycalibration for open channel flow measure-ment, including:
■ Flow measurement principles
■ Primary measurement devices: flumes, weirs
■ Velocity sensors
■ Validation and testing
Course contents
SM-1b: Open channel flow measurement principles (0.5 CEUs)
A comprehensive overview of how to set up a dual pumpfixed/alternating duty assist/backup pump using ultrasonic levelmeasurement instrumentation.
Duration
1 day (9:00 a.m. to 3:00 p.m.)
Fee
$485 Cdn(includes applicable taxes)
A comprehensive overview of principles and necessarycalibration for open channel flow measurement.
Duration1 day (9:00 a.m. to 3:00 p.m.)
Fee
$485 Cdn (includes applicable taxes)
Sound knowledge of setting up dual pump,fixed/alternating duty assist/backup pumpingusing ultrasonic level measurement instru-mentation, including:
■ Level measurement principles
■ Setting up dual pumps, alternate duty
assist, backup pumping
■ Alarming
■ Failure investigation
Dates Register by
September 26, 2006 September 8, 2006
October 24, 2006 October 6, 2006
November 28, 2006 November 10, 2006
January 23, 2007 January 5, 2007
February 13, 2007 January 26, 2007
March 27, 2007 March 9, 2007
May 29, 2007 May 11, 2007
Dates Register by
September 27, 2006 September 8, 2006
October 25, 2006 October 6, 2006
November 29, 2006 November 10, 2006
January 24, 2007 January 5, 2007
February 14, 2007 January 26, 2007
March 28, 2007 March 9, 2007
May 30, 2007 May 11, 2007
Course contents
OETC approved courses
SM-2: Water/wastewater plant level control (0.75 CEUs)
SM-3: Data communications (0.75 CEUs)
A comprehensive overview of how to set up level measurementand pump/alarm controls.
Duration1 day ( 9:00 a.m. to 5:00 p.m.)
Fee
$595 Cdn (includes applicable taxes)
A comprehensive overview of how to set up level applicationsto communicate with the outside world.
Duration1 day (9:00 a.m. to 5:00 p.m.)
Fee
$595 Cdn(includes applicable taxes)
Dates Register by
October 27, 2006 October 6, 2006
March 30, 2007 March 9, 2007
Sound knowledge of setting up levelmeasurements to communicate usingModbus® and PROFIBUS for the followingapplications:
■ Modbus RTU to PC via RS-232/RS-485
■ Modbus RTU over a modem
■ Report by Exception
■ Modbus RTU OPC server
■ PROFIBUS DP to PLC
Course contents
Course contentsSound knowledge of setting up levelmeasurement and pump/alarm controls withthe following applications:
■ Screen differential using ultrasonic technology
■ Alum tank
■ Digester, using microwave/radar technology
■ Point level switches, using ultrasonic andcapacitance technologies
Dates Register by
September 28, 2006 September 8, 2006
October 26, 2006 October 6, 2006
November 30, 2006 November 10, 2006
January 25, 2007 January 5, 2007
February 15, 2007 January 26, 2007
March 29, 2007 March 9, 2007
May 31, 2007 May 11, 2007
OETC approved courses
Modbus is a a registered trademark of Schneider Electric
Your Siemens partner worldwide
Contact us on the Internet at:www.siemens.com/instrumentation/training/canada
7M
L19
96
-5H
Q0
3
Prin
ted
in C
anad
a
Siemens Milltronics Process Instruments Inc.1954 Technology Drive, P.O. Box 4225Peterborough, OntarioCanada K9J 7B1
Certification No.002284