Laser Material - Trotec › media › wysiwyg › ... · Laser Material TroLase Thins Material:...
1
Laser Material TroLase Thins Material: Micro-surfaced impact acrylic, 2 ply Finish: matt colours and gloss, brushed metal Thickness: 0.5 mm Engraving depth: 0.08 mm Cutting method: laser, saw, guillotine TroLase Material: Micro-surfaced impact acrylic, 2 & 3 ply Finish: matt, gloss Thickness: 0.8 mm / 1.6 mm / 3.2 mm Engraving depth: 0.08 mm Cutting method: laser, saw, guillotine TroLase Metallic Material: Micro-surfaced impact acrylic, 2 ply Finish: brushed, smooth Thickness: 0.8 mm / 1.6 mm / 3.2 mm Engraving depth: 0.08 mm Cutting method: laser, saw, guillotine TroLase Reverse Material: Micro-surfaced impact acrylic with back coating, 2 ply Finish: matt, gloss (gold and silver) Thickness: 1.6 mm Engraving depth: 0.08 mm Cutting method: laser, saw TroLase Lights Material: Micro-surfaced pre-adhesive plastic, 2 ply Finish: gloss, brushed Thickneses: 0.1 mm Engraving depth: 0.04 mm Cutting method: laser, guillotine Material: Co-extruded impact acrylic, 2 ply Finish: textured matt Thickness: 1.6 mm / 3.2 mm Engraving depth: 0.18 mm, 0.25 mm - red and yellow Cutting method: laser, saw, guillotine TroLase Textures marking cutting engraving www.engraving-supplies.co.uk 1.6 0.8 1.6 Sapphire/White Red/White Purple/White 0.8 0.8 0.8 0.8 0.8 1.6 1.6 1.6 0.8 1.6 1.6 0.8 1.6 3.2 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 3.2 1.6 Yellow/Red 3.2 3.2 3.2 3.2 Burgundy/White Orange/White Yellow/Black Green/White Celadon Green/White Evergreen/White Black/White Smoke Grey/White Blue/White Gloss Black/White Black/Silver 1.6 Navy Blue/White 1.6 Almond/Black 1.6 1.6 1.6 1.6 Dark Brown/White Dark Walnut/White Walnut/White Light Grey/White 0.8 0.8 1.6 1.6 1.6 3.2 3.2 White/Blue White/Red White/Black Black/Gold Gloss Black/Gold 1.6 1.6 L972-206 L912-203 L912-206 L912-209 L704-203 L704-206 L704-209 L602-203 L602-206 L602-209 L512-203 L512-206 L512-209 L206-203 L206-206 L206-209 L204-203 L204-206 L204-209 L402-203 L402-206 L402-209 L427-206 L417-206 L422-206 L413-206 L842-206 L002-206 L192-206 L322-206 L312-206 L205-206 L854-206 L582-206 L552-206 L932-203 L932-206 L932-209 L706-206 L612-203 L612-206 L622-206 L502-203 L502-206 L402-306 L402-309 L204-306 L204-309 mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm Black/White/Black White/Black/White Smooth Gold/Black Brushed Gold/Black Brushed European Gold/Black Brushed Aluminium/Black Brushed Silver/Black Smooth Silver/Black Brushed Copper/Black Brushed Deep Bronze/Black 0.8 0.8 0.8 0.8 0.8 0.8 1.6 3.2 1.6 1.6 1.6 1.6 1.6 1.6 0.8 1.6 3.2 3.2 3.2 3.2 3.2 LMT714-203 LMT714-206 LMT714-209 LMT734-203 LMT734-206 LMT734-209 LMT754-203 LMT754-206 LMT754-209 LMT354-203 LMT354-206 LMT354-209 LMT334-203 LMT334-206 LMT334-209 LMT344-203 LMT344-206 LMT344-209 LMT894-203 LMT894-206 LMT884-206 mm mm mm mm mm mm mm mm TroLase Metallic Plus Material: Modified impact acrylic, 2 ply Finish: brushed Thickness: 0.8 mm / 1.6 mm / 3.2 mm Engraving depth: 0.08 mm Cutting method: laser, saw, guillotine Brushed Stainless Steel/Black Brushed Stainless Steel/Blue Brushed Stainless Steel/Red Brushed Bright Nickel/ Black Brushed Gold/Black Brushed Copper/Black 0.8 0.8 0.8 0.8 0.8 0.8 1.6 1.6 1.6 1.6 1.6 1.6 3.2 3.2 3.2 3.2 3.2 3.2 LMT+314-203 LMT+314-206 LMT+314-209 LMT+364-203 LMT+364-206 LMT+364-209 LMT+315-203 LMT+315-206 LMT+315-209 LMT+764-203 LMT+764-206 LMT+764-209 LMT+864-203 LMT+864-206 LMT+864-209 LMT+316-203 LMT+316-206 LMT+316-209 mm mm mm mm mm mm Black/White Brushed Gold/Black Brushed Aluminium/Black Brushed Copper/Black White/Black Brushed European Gold/ Black 0.5 0.5 0.5 0.5 0.5 0.5 LT402-202 LT734-202 LT754-202 LT894-202 LT204-202 LT354-202 mm Red/White Purple/White White Single Ply Celestial Blue/Gold Port Wine/Gold Yellow/Black Blue/White 0.5 0.5 0.5 0.5 0.5 0.5 0.5 LT602-202 LT582-202 LT202-102 LT577-202 LT677-202 LT744-202 LT512-202 mm mm mm mm mm mm mm mm mm mm mm mm Brushed Bronze/Black Brushed Deep Bronze/ Black Black/Gold Gloss Black/Gold Brushed Silver/Black Black/Silver Black Single Ply Gloss Black/Silver Trophy Silver/Black Smooth Silver/Black Trophy Gold/Black 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 LT794-202 LT874-202 LT884-202 LT334-202 LT394-202 LT344-202 LT417-202 LT427-202 LT413-202 LT404-102 LT423-202 mm mm mm mm mm mm mm mm mm mm mm Red/White Yellow/Black Green/White 1.6 1.6 1.6 3.2 Sapphire/White Royal Blue/White 1.6 1.6 3.2 White/Red White/Blue White/Black Ash Grey/Black Black/White 1.6 1.6 1.6 1.6 1.6 3.2 3.2 LTX642-206 LTX642-209 LTX592-206 LTX592-209 LTX244-206 LTX244-209 LTX503-206 LTX205-206 LTX374-206 LTX422-206 LTX422-209 LTX246-206 LTX774-206 LTX962-206 mm mm mm mm mm mm mm mm mm mm Black/White White/Black Brushed Silver/Black Brushed Brass/Black Black/Gold Yellow/Black Brushed Bronze/Black Smooth Silver/Black Smooth Gold/Black Black/Silver 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 LL61-201 LL62-201 LL63-201 LL64-201 LL65-201 LL68-201 LL69-201 LL73-201 LL74-201 LL75-201 mm mm mm mm mm mm mm mm mm mm Material: Single-ply modified acrylic Finish: matt Thickness: 0.8 mm / 1.0 mm / 1.6 mm / 3.2 mm Cutting method: laser, saw, guillotine TroLase ADA Signage Yellow White Polar White Light Grey Charcoal Grey Clear Black Silver 0.8 1.0 1.0 0.8 0.8 0.8 1.0 0.8 1.6 1.6 1.6 1.6 1.6 1.6 1.6 0.8 0.8 0.8 3.2 3.2 LS701-103 LS701-106 LS201-103 LS201-104 LS201-106 LS204-103 LS204-104 LS204-106 LS204-109 LS305-103 LS305-106 LS307-103 LS307-106 LS101-103 LS101-106 LS401-103 LS401-104 LS401-106 LS401-109 LS304-103 mm Red Burgundy Green Sapphire Marine Blue 0.8 1.6 0.8 0.8 1.6 1.6 1.6 1.6 3.2 3.2 LS601-103 LS601-106 LS601-109 LS602-106 LS901-103 LS901-106 LS501-103 LS501-106 LS501-109 LS502-106 mm mm mm mm mm mm mm mm mm mm mm mm Matt/Red Matt/Burgundy Matt/Blue Matt/Navy Blue Matt/Green Matt/Dark Brown 1.6 1.6 1.6 1.6 1.6 1.6 Matt/White Matt/Ivory Matt/Black Matt/Gold Gloss/Gold Matt/Silver 1.6 1.6 1.6 1.6 1.6 1.6 Gloss/Silver Matt/Yellow 1.6 1.6 LR601-206 LR201-206 LR621-206 LR221-206 LR701-206 LR511-206 LR401-206 LR551-206 LR711-206 LR710-206 LR341-206 LR340-206 LR931-206 LR841-206 mm mm mm mm mm mm mm mm mm mm mm mm mm mm The optimum material for each application – Trotec materials for laser engraving. Trotec Laser UK & Ireland 0191 580 1182 [email protected] Unit 3 Faraday Close, Pattinson Ind. Est. Washington, NE38 8QJ First class materials for easy processing • Efficient engraving with fewer passes • Minimised post production cleaning • No sticky edges after laser cutting • Colour and quality consistency • Highly durable materials Laser materials Applicable to materials with an acrylic core. Many coated or anodised metals can be laser engraved or marked but not all can be vector cut. Exterior use This material is UV-resistant and suitable for outdoor use. Of course, it can also be used for indoor applications. Rotary materials This material (usually with ABS core) is suitable for processing with mechanical engraving devices. Indoor use This material is not suitable for long-term, unprotected use in outdoor areas (UV exposure may cause discolouration). Reverse engraving This material is engraved from the back using mirrored graphics. The engraved area can be infilled or backlit to enhance the contrast against the coloured background. Icon legend 3.2 3.2 3 ply 2385.indd 1 06.07.15 10:44 Rotary material Laser material Interior use Exterior use Rotary material Laser material Interior use Rotary material Laser material Interior use Rotary material Laser material Interior use Exterior use Rotary material Laser material Interior use Exterior use Rotary material Laser material Interior use Exterior use Rotary material Laser material Interior use Exterior use Reverse Rotary material Laser material Interior use Exterior use
Transcript of Laser Material - Trotec › media › wysiwyg › ... · Laser Material TroLase Thins Material:...
Laser MaterialTroLase Thins
Material: Micro-surfaced impact acrylic, 2 plyFinish: matt colours and gloss, brushed metalThickness: 0.5 mmEngraving depth: 0.08 mmCutting method: laser, saw, guillotine
TroLaseMaterial: Micro-surfaced impact acrylic, 2 & 3 plyFinish: matt, glossThickness: 0.8 mm / 1.6 mm / 3.2 mmEngraving depth: 0.08 mmCutting method: laser, saw, guillotine
TroLase MetallicMaterial: Micro-surfaced impact acrylic, 2 plyFinish: brushed, smoothThickness: 0.8 mm / 1.6 mm / 3.2 mmEngraving depth: 0.08 mmCutting method: laser, saw, guillotine
TroLase ReverseMaterial: Micro-surfaced impact acrylic with back coating, 2 plyFinish: matt, gloss (gold and silver)Thickness: 1.6 mmEngraving depth: 0.08 mmCutting method: laser, saw
TroLase LightsMaterial: Micro-surfaced pre-adhesive plastic, 2 plyFinish: gloss, brushedThickneses: 0.1 mmEngraving depth: 0.04 mmCutting method: laser, guillotine
Material: Co-extruded impact acrylic, 2 plyFinish: textured mattThickness: 1.6 mm / 3.2 mmEngraving depth: 0.18 mm, 0.25 mm - red and yellow Cutting method: laser, saw, guillotine
TroLase Textures
marking cutting engraving
www.engraving-supplies.co.uk
1.60.8
1.6
Sapphire/White
Red/White
Purple/White
0.8
0.8
0.8
0.8 0.81.6
1.6
1.6
0.81.6
1.60.81.63.2
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
3.2
1.6Yellow/Red
3.2
3.2
3.2 3.2
Burgundy/White
Orange/White
Yellow/Black Green/White
Celadon Green/White
Evergreen/White
Black/White
Smoke Grey/White
Blue/White
Gloss Black/White
Black/Silver
1.6Navy Blue/White
1.6Almond/Black
1.6
1.6
1.6
1.6
Dark Brown/White
Dark Walnut/White
Walnut/White
Light Grey/White
0.8 0.81.6 1.6 1.63.2 3.2
White/BlueWhite/Red White/Black
Black/Gold
Gloss Black/Gold
1.6
1.6
L972-206
L912-203L912-206L912-209
L704-203L704-206L704-209
L602-203L602-206L602-209
L512-203L512-206L512-209
L206-203L206-206L206-209
L204-203L204-206L204-209
L402-203L402-206L402-209
L427-206
L417-206
L422-206
L413-206
L842-206
L002-206
L192-206
L322-206
L312-206
L205-206
L854-206
L582-206
L552-206
L932-203L932-206L932-209
L706-206
L612-203L612-206
L622-206 L502-203L502-206
L402-306L402-309
L204-306L204-309
mm
mm
mm
mm mm
mm mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mmmm
Black/White/BlackWhite/Black/White
Smooth Gold/Black
Brushed Gold/Black
Brushed European Gold/Black
Brushed Aluminium/Black
Brushed Silver/Black
Smooth Silver/Black
Brushed Copper/Black
Brushed Deep Bronze/Black0.8
0.8
0.8
0.8
0.8
0.81.63.2
1.6
1.6
1.6
1.6
1.6
1.60.8
1.6
3.2
3.2
3.2
3.2
3.2
LMT714-203LMT714-206LMT714-209
LMT734-203LMT734-206LMT734-209
LMT754-203LMT754-206LMT754-209
LMT354-203LMT354-206 LMT354-209
LMT334-203LMT334-206LMT334-209
LMT344-203LMT344-206LMT344-209
LMT894-203LMT894-206
LMT884-206
mm
mm
mm
mm
mm
mm
mm
mm
TroLase Metallic PlusMaterial: Modifi ed impact acrylic, 2 plyFinish: brushedThickness: 0.8 mm / 1.6 mm / 3.2 mmEngraving depth: 0.08 mmCutting method: laser, saw, guillotine
Brushed Stainless Steel/Black
Brushed Stainless Steel/Blue Brushed Stainless Steel/Red
Brushed Bright Nickel/Black
Brushed Gold/Black
Brushed Copper/Black0.8
0.8 0.8 0.8
0.8 0.81.6
1.6 1.6 1.6
1.6 1.63.2
3.2 3.2 3.2
3.2 3.2
LMT+314-203LMT+314-206LMT+314-209
LMT+364-203LMT+364-206LMT+364-209
LMT+315-203LMT+315-206LMT+315-209
LMT+764-203LMT+764-206LMT+764-209
LMT+864-203LMT+864-206LMT+864-209
LMT+316-203LMT+316-206LMT+316-209
mm mm
mm mm
mm
mm
Black/White
Brushed Gold/Black Brushed Aluminium/Black
Brushed Copper/Black
White/Black
Brushed European Gold/Black
0.5
0.5
0.5 0.5
0.50.5
LT402-202
LT734-202
LT754-202 LT894-202
LT204-202LT354-202
mm
Red/White
Purple/White
White Single Ply
Celestial Blue/Gold Port Wine/Gold
Yellow/Black
Blue/White
0.5
0.5
0.5
0.5 0.5
0.5
0.5
LT602-202
LT582-202
LT202-102
LT577-202 LT677-202
LT744-202
LT512-202
mm
mm
mm
mm mm
mm
mm
mm
mm mm
mmmm
Brushed Bronze/Black
Brushed Deep Bronze/Black
Black/Gold
Gloss Black/Gold
Brushed Silver/Black
Black/Silver
Black Single Ply
Gloss Black/Silver
Trophy Silver/Black
Smooth Silver/Black
Trophy Gold/Black0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
LT794-202
LT874-202
LT884-202
LT334-202
LT394-202
LT344-202
LT417-202
LT427-202
LT413-202
LT404-102
LT423-202
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
Red/White
Yellow/Black
Green/White
1.6
1.6
1.6
3.2
Sapphire/White
Royal Blue/White
1.6
1.63.2
White/Red White/Blue White/Black
Ash Grey/Black
Black/White
1.6 1.6 1.6
1.6
1.6
3.2
3.2LTX642-206LTX642-209
LTX592-206LTX592-209
LTX244-206LTX244-209
LTX503-206
LTX205-206
LTX374-206
LTX422-206LTX422-209
LTX246-206
LTX774-206
LTX962-206
mm mm
mm
mm
mm
mm
mm
mm
mm
mm
Black/White
White/BlackBrushed Silver/Black
Brushed Brass/Black
Black/Gold
Yellow/Black
Brushed Bronze/Black
Smooth Silver/Black
Smooth Gold/Black
Black/Silver0.1
0.10.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1 LL61-201
LL62-201LL63-201
LL64-201
LL65-201
LL68-201
LL69-201
LL73-201
LL74-201
LL75-201mm
mmmm
mm
mm
mm
mm
mm
mm
mm
Material: Single-ply modifi ed acrylicFinish: mattThickness: 0.8 mm / 1.0 mm / 1.6 mm / 3.2 mmCutting method: laser, saw, guillotine
TroLase ADA Signage
Yellow
White
Polar White
Light Grey
Charcoal GreyClear
Black
Silver
0.8
1.0
1.0
0.8
0.80.8
1.0
0.8
1.6
1.6
1.6
1.6
1.61.6
1.6
0.8
0.8
0.8
3.2
3.2
LS701-103LS701-106
LS201-103LS201-104LS201-106
LS204-103LS204-104LS204-106LS204-109
LS305-103LS305-106
LS307-103LS307-106
LS101-103LS101-106
LS401-103LS401-104LS401-106LS401-109
LS304-103
mm
Red
Burgundy
Green
Sapphire
Marine Blue
0.8
1.6
0.8
0.81.6
1.6
1.6
1.6
3.2 3.2
LS601-103LS601-106LS601-109
LS602-106
LS901-103LS901-106
LS501-103LS501-106LS501-109
LS502-106
mm
mm
mm
mm
mm
mm
mm
mm
mmmm
mm
mm
Matt/Red
Matt/Burgundy
Matt/Blue
Matt/Navy Blue
Matt/Green
Matt/Dark Brown
1.6
1.6
1.6
1.6
1.6
1.6
Matt/White
Matt/Ivory
Matt/Black Matt/Gold
Gloss/Gold
Matt/Silver
1.6
1.6
1.6 1.6
1.6
1.6
Gloss/Silver
Matt/Yellow
1.6
1.6
LR601-206 LR201-206
LR621-206 LR221-206
LR701-206
LR511-206 LR401-206
LR551-206
LR711-206
LR710-206
LR341-206
LR340-206
LR931-206
LR841-206
mm mm
mm mm
mm
mm mm
mm
mm
mm
mm
mm
mm
mm
The optimum material for each application –Trotec materials for laser engraving.
Trotec Laser UK & Ireland0191 580 1182
[email protected] 3 Faraday Close, Pattinson Ind. Est.
Washington, NE38 8QJ
First class materials for easy processing
• Effi cient engraving with fewer passes
• Minimised post production cleaning
• No sticky edges after laser cutting
• Colour and quality consistency
• Highly durable materials
Laser materialsApplicable to materials with an acrylic core. Manycoated or anodised metals can be laser engravedor marked but not all can be vector cut.
Exterior useThis material is UV-resistant and suitable for outdoor use. Of course, it can also be used for indoor applications.
Rotary materialsThis material (usually with ABS core) is suitablefor processing with mechanical engraving devices.
Indoor useThis material is not suitable for long-term, unprotected use in outdoor areas (UV exposure may cause discolouration).
Reverse engravingThis material is engraved from the back using mirrored graphics. The engraved area can be infi lled or backlit to enhance the contrast against thecoloured background.
Icon legend
3.23.2
3 ply
2385.indd 1 06.07.15 10:44
Rotarymaterial
Lasermaterial
Interioruse
Exterioruse
Rotarymaterial
Lasermaterial
Interioruse
Rotarymaterial
Lasermaterial
Interioruse
Rotarymaterial
Lasermaterial
Interioruse
Exterioruse
Rotarymaterial
Lasermaterial
Interioruse
Exterioruse
Rotarymaterial
Lasermaterial
Interioruse
Exterioruse Rotary
materialLasermaterial
Interioruse
Exterioruse
Reverse
Rotarymaterial
Lasermaterial
Interioruse
Exterioruse
