LASER MACRO LASER MACRO - Interempresas · Fiber bragg grating (FBG) Pumpcoupler Signal-/Process...
6
ROFIN FL SERIES High Brightness Fiber Lasers – Precise, Fast and Reliable. LASER MACRO THE POWER OF LIGHT
Transcript of LASER MACRO LASER MACRO - Interempresas · Fiber bragg grating (FBG) Pumpcoupler Signal-/Process...
The ROFIN FL Series combines the advantages of diode pumped, solid-state lasers with those of waveguides.
ROFIN-SINARLaserG
mbH
·Datasubjecttochange
withoutnotice·0
3/20
11
ROFIN-SINAR Laser GmbH
Berzeliusstraße 87
22113 Hamburg
Germany
Tel.: +49- (0)-40 -7 33 63 -0
Fax.: +49- (0)-40 -7 33 63 4100
ROFIN-SINAR, Inc.
40984 Concept Drive
Plymouth, MI 48170
USA
Tel.: +1-734-455-5400
Fax.: +1-734-455 2741
www.rofin.com
ROFIN FL SERIESHigh Brightness Fiber Lasers –Precise, Fast and Reliable.
LASER MACRO LASER MACRO
T H E P O W E R O F L I G H T T H E P O W E R O F L I G H T
ROFIN has sales and service teams in about 40 countries
around the world. From planning through implementation, to fast
and reliable service - our staff members are available in every
phase of your project.
To learn more about the various locations of ROFIN, visit us at
We are where you are!
www.rofin.com/worldwide
ROF11010_FL_Broschuere_E_170211.qxd:Layout 1 25.02.2011 9:46 Uhr Seite 1
Fiber bragg grating (FBG)
Pumpcoupler
Signal-/Process fiber
Pump light
Fiber bragg grating (FBG)
Doped active fiberPumpcoupler
Pump light
ROFIN FL SERIES
THE PRODUCT THE PRINCIPLE
ROFIN FL SERIES
Absolutely Precise, Absolutely ReliableOptically and electronically modular designedpumping units that are easy to maintain
High beam quality allows small focal spots and atthe same time large working distances
No contamination of processing optics due to thelong distance to the workpiece
Distortion optimized welding – mainly smallercomponents with less or no heat capacity or conductivity
High-power densities allow new welding techniques,such as oscillation or wobbling and therefore providethe development of new applications
High absorption in many materials thanks to awavelength in the range of 1 µm
Maximum speed while cutting and welding thinmaterials – unachievable with conventional beamsources
Increased productivity and reduced cycle times with“dynamic beam” scanner systems: different positionsand small geometries at workpieces are approachedfast and precisely
Beam profile of a FL 010 S – 1,000 Watt with single-mode
Variable weld geometries due to a wide range ofoptical fibers
Fiber-fiber switch and energy splitter for ideal utilization
ROFIN FL SERIES
THE BENEFIT
LASER MACRO
T H E P O W E R O F L I G H T
Fiber lasers use special fiber optics as active mediumwith thicknesses of only a few µm, which produces highperformance at optimal beam quality. The mirrors of theresonator are used as fiber bragg gratings (FBGs) todefine the wavelength of a fiber laser.
Pumped light from focused high-power laser diodes createa beam that is coupled by so called pump couplers intothe resonator and results in the active fiber excitation.
Opposite to common concepts in which the created laserbeam switches repeatedly between air and the laser active
medium, this laser beam does not leave the fiber opticbefore the process optic (single-mode) or the beam switch(multi-mode). Due to this “all-in-glass” technology, the riskof contamination of the optics, and therefore a reductionof the beam quality, can be eliminated.
The laser light is guided by process fibers to the workpiece,where it can be focused for the particular application. Theuse of innovative scanner techniques for cutting andwelding is also possible.
New Peak Performances Thanks to Thinnest Fiber OpticsIdeal Beam Quality for Every ApplicationThe high brightness fiber lasers of the ROFIN FL Series are the ideal addition to compliment the range of lasers currentlyoffered by ROFIN. With their high performance, they are suitable for classical cutting and welding applications as wellas for various high speed, scanner-based applications.
The emitted wavelength in the range of 1 µm achieves high absorption in many materials, such that all commonsolid-state laser applications can be performed using the FL Series laser. With the multi-mode version of the FL laser,fiber optics of 50 to 600 µm can be used. The single-mode version produces exceptionally good beam quality,typically in the range of ≤ 0.4 mm x mrad. The excellent beam quality also allows the efficient use of “dynamic beam”scanner systems for high-speed positioning as well as the fast and precise application of small geometries atworkpieces. This reduces cycle times and increases productivity.
Beam switches and energy splitters are available as an option,which allows up to four working stations to be operated with onlyone laser. Non-productive times are reduced and the utilization ofthe laser is increased.
For easy integration into existing machining concepts, the compactversion of the fiber laser is available as an alternative system solution.
ROFIN utilizes more than 35 years experience with its provenproduct quality and service concept to achieve the ideal beam forevery application.
ROFIN FL 020 ROFIN FL 010 C
ROF11010_FL_Broschuere_E_170211.qxd:Layout 1 25.02.2011 9:46 Uhr Seite 2
Fiber bragg grating (FBG)
Pumpcoupler
Signal-/Process fiber
Pump light
Fiber bragg grating (FBG)
Doped active fiberPumpcoupler
Pump light
ROFIN FL SERIES
THE PRODUCT THE PRINCIPLE
ROFIN FL SERIES
Absolutely Precise, Absolutely ReliableOptically and electronically modular designedpumping units that are easy to maintain
High beam quality allows small focal spots and atthe same time large working distances
No contamination of processing optics due to thelong distance to the workpiece
Distortion optimized welding – mainly smallercomponents with less or no heat capacity or conductivity
High-power densities allow new welding techniques,such as oscillation or wobbling and therefore providethe development of new applications
High absorption in many materials thanks to awavelength in the range of 1 µm
Maximum speed while cutting and welding thinmaterials – unachievable with conventional beamsources
Increased productivity and reduced cycle times with“dynamic beam” scanner systems: different positionsand small geometries at workpieces are approachedfast and precisely
Beam profile of a FL 010 S – 1,000 Watt with single-mode
Variable weld geometries due to a wide range ofoptical fibers
Fiber-fiber switch and energy splitter for ideal utilization
ROFIN FL SERIES
THE BENEFIT
LASER MACRO
T H E P O W E R O F L I G H T
Fiber lasers use special fiber optics as active mediumwith thicknesses of only a few µm, which produces highperformance at optimal beam quality. The mirrors of theresonator are used as fiber bragg gratings (FBGs) todefine the wavelength of a fiber laser.
Pumped light from focused high-power laser diodes createa beam that is coupled by so called pump couplers intothe resonator and results in the active fiber excitation.
Opposite to common concepts in which the created laserbeam switches repeatedly between air and the laser active
medium, this laser beam does not leave the fiber opticbefore the process optic (single-mode) or the beam switch(multi-mode). Due to this “all-in-glass” technology, the riskof contamination of the optics, and therefore a reductionof the beam quality, can be eliminated.
The laser light is guided by process fibers to the workpiece,where it can be focused for the particular application. Theuse of innovative scanner techniques for cutting andwelding is also possible.
New Peak Performances Thanks to Thinnest Fiber OpticsIdeal Beam Quality for Every ApplicationThe high brightness fiber lasers of the ROFIN FL Series are the ideal addition to compliment the range of lasers currentlyoffered by ROFIN. With their high performance, they are suitable for classical cutting and welding applications as wellas for various high speed, scanner-based applications.
The emitted wavelength in the range of 1 µm achieves high absorption in many materials, such that all commonsolid-state laser applications can be performed using the FL Series laser. With the multi-mode version of the FL laser,fiber optics of 50 to 600 µm can be used. The single-mode version produces exceptionally good beam quality,typically in the range of ≤ 0.4 mm x mrad. The excellent beam quality also allows the efficient use of “dynamic beam”scanner systems for high-speed positioning as well as the fast and precise application of small geometries atworkpieces. This reduces cycle times and increases productivity.
Beam switches and energy splitters are available as an option,which allows up to four working stations to be operated with onlyone laser. Non-productive times are reduced and the utilization ofthe laser is increased.
For easy integration into existing machining concepts, the compactversion of the fiber laser is available as an alternative system solution.
ROFIN utilizes more than 35 years experience with its provenproduct quality and service concept to achieve the ideal beam forevery application.
ROFIN FL 020 ROFIN FL 010 C
ROF11010_FL_Broschuere_E_170211.qxd:Layout 1 25.02.2011 9:46 Uhr Seite 2
Fiber bragg grating (FBG)
Pumpcoupler
Signal-/Process fiber
Pump light
Fiber bragg grating (FBG)
Doped active fiberPumpcoupler
Pump light
ROFIN FL SERIES
THE PRODUCT THE PRINCIPLE
ROFIN FL SERIES
Absolutely Precise, Absolutely ReliableOptically and electronically modular designedpumping units that are easy to maintain
High beam quality allows small focal spots and atthe same time large working distances
No contamination of processing optics due to thelong distance to the workpiece
Distortion optimized welding – mainly smallercomponents with less or no heat capacity or conductivity
High-power densities allow new welding techniques,such as oscillation or wobbling and therefore providethe development of new applications
High absorption in many materials thanks to awavelength in the range of 1 µm
Maximum speed while cutting and welding thinmaterials – unachievable with conventional beamsources
Increased productivity and reduced cycle times with“dynamic beam” scanner systems: different positionsand small geometries at workpieces are approachedfast and precisely
Beam profile of a FL 010 S – 1,000 Watt with single-mode
Variable weld geometries due to a wide range ofoptical fibers
Fiber-fiber switch and energy splitter for ideal utilization
ROFIN FL SERIES
THE BENEFIT
LASER MACRO
T H E P O W E R O F L I G H T
Fiber lasers use special fiber optics as active mediumwith thicknesses of only a few µm, which produces highperformance at optimal beam quality. The mirrors of theresonator are used as fiber bragg gratings (FBGs) todefine the wavelength of a fiber laser.
Pumped light from focused high-power laser diodes createa beam that is coupled by so called pump couplers intothe resonator and results in the active fiber excitation.
Opposite to common concepts in which the created laserbeam switches repeatedly between air and the laser active
medium, this laser beam does not leave the fiber opticbefore the process optic (single-mode) or the beam switch(multi-mode). Due to this “all-in-glass” technology, the riskof contamination of the optics, and therefore a reductionof the beam quality, can be eliminated.
The laser light is guided by process fibers to the workpiece,where it can be focused for the particular application. Theuse of innovative scanner techniques for cutting andwelding is also possible.
New Peak Performances Thanks to Thinnest Fiber OpticsIdeal Beam Quality for Every ApplicationThe high brightness fiber lasers of the ROFIN FL Series are the ideal addition to compliment the range of lasers currentlyoffered by ROFIN. With their high performance, they are suitable for classical cutting and welding applications as wellas for various high speed, scanner-based applications.
The emitted wavelength in the range of 1 µm achieves high absorption in many materials, such that all commonsolid-state laser applications can be performed using the FL Series laser. With the multi-mode version of the FL laser,fiber optics of 50 to 600 µm can be used. The single-mode version produces exceptionally good beam quality,typically in the range of ≤ 0.4 mm x mrad. The excellent beam quality also allows the efficient use of “dynamic beam”scanner systems for high-speed positioning as well as the fast and precise application of small geometries atworkpieces. This reduces cycle times and increases productivity.
Beam switches and energy splitters are available as an option,which allows up to four working stations to be operated with onlyone laser. Non-productive times are reduced and the utilization ofthe laser is increased.
For easy integration into existing machining concepts, the compactversion of the fiber laser is available as an alternative system solution.
ROFIN utilizes more than 35 years experience with its provenproduct quality and service concept to achieve the ideal beam forevery application.
ROFIN FL 020 ROFIN FL 010 C
ROF11010_FL_Broschuere_E_170211.qxd:Layout 1 25.02.2011 9:46 Uhr Seite 2
The ROFIN FL Series combines the advantages of diode pumped, solid-state lasers with those of waveguides.
ROFIN-SINARLaserG
mbH
·Datasubjecttochange
withoutnotice·0
3/20
11
ROFIN-SINAR Laser GmbH
Berzeliusstraße 87
22113 Hamburg
Germany
Tel.: +49- (0)-40 -7 33 63 -0
Fax.: +49- (0)-40 -7 33 63 4100
ROFIN-SINAR, Inc.
40984 Concept Drive
Plymouth, MI 48170
USA
Tel.: +1-734-455-5400
Fax.: +1-734-455 2741
www.rofin.com
ROFIN FL SERIESHigh Brightness Fiber Lasers –Precise, Fast and Reliable.
LASER MACRO LASER MACRO
T H E P O W E R O F L I G H T T H E P O W E R O F L I G H T
ROFIN has sales and service teams in about 40 countries
around the world. From planning through implementation, to fast
and reliable service - our staff members are available in every
phase of your project.
To learn more about the various locations of ROFIN, visit us at
We are where you are!
www.rofin.com/worldwide
ROF11010_FL_Broschuere_E_170211.qxd:Layout 1 25.02.2011 9:46 Uhr Seite 1
The ROFIN FL Series combines the advantages of diode pumped, solid-state lasers with those of waveguides.
ROFIN-SINARLaserG
mbH
·Datasubjecttochange
withoutnotice·0
3/20
11
ROFIN-SINAR Laser GmbH
Berzeliusstraße 87
22113 Hamburg
Germany
Tel.: +49- (0)-40 -7 33 63 -0
Fax.: +49- (0)-40 -7 33 63 4100
ROFIN-SINAR, Inc.
40984 Concept Drive
Plymouth, MI 48170
USA
Tel.: +1-734-455-5400
Fax.: +1-734-455 2741
www.rofin.com
ROFIN FL SERIESHigh Brightness Fiber Lasers –Precise, Fast and Reliable.
LASER MACRO LASER MACRO
T H E P O W E R O F L I G H T T H E P O W E R O F L I G H T
ROFIN has sales and service teams in about 40 countries
around the world. From planning through implementation, to fast
and reliable service - our staff members are available in every
phase of your project.
To learn more about the various locations of ROFIN, visit us at
We are where you are!
www.rofin.com/worldwide
ROF11010_FL_Broschuere_E_170211.qxd:Layout 1 25.02.2011 9:46 Uhr Seite 1
![Microindentation Sensor System Based ... - Fiber Bragg Grating · characterizations with high spatial resolution. An integrated fiber Bragg grating (FBG) acts as a force sensor [25].](https://static.fdocuments.net/doc/165x107/5eb728e156b9257755281a1a/microindentation-sensor-system-based-fiber-bragg-grating-characterizations.jpg)
