LASER CUTTING

FIBRE LASER CUTTING WITH EXPANDED CAPABILITIES

02

UNIQUE LASER CONTROL THAT OPTIMIZES SHEET METAL CUTTING

Thanks to its own developed and built laser source, AMADA designed a very unique laser cutting control on the new ENSIS machine. The two main outputs from this machine are first a continuous adaptation of the process to the metal thickness, and second an optimized usage of energy so the machine can do the same jobs as a conventional machine for much lower consumption.

The technological innovations developed for the ENSIS-3015 AJ, together with Amada's expertise provide this machine with the following key features :

• Full range cutting capability without the need to change lenses. Continuous operation from thin to thick material without any additional setup.

• 2kW high quality result and high performance comparable to 4kW conventional laser cutting capabilities.

• Improvement of energy efficiency providing higher quality beam.

• Laser modules are 50% smaller compared to similar modules of the same capacity and the fiber laser source is built-in to the machine frame.

• The integration of the mechanical and electrical components into a single unit provides maximum productivity while minimizing floor space requirements.

Laser Diode

Active Fiber

Process Fiber

Variable Beam Control Unit

03

FOUR KEY FEATURES THAT MAKE THE DIFFERENCE

AMADA is always pushing to reduce the environmental impact of the solutions we provide. The ENSIS laser cutting machine is another premium example of this philosophy. With the ability to process thick material only previously possible with higher powered lasers, the ENSIS machine achieves an industry first - high performance laser cutting with a low power oscillator. In most cases, with mild steel, the high quality/thickness performances reached by the ENSIS AJ machine and its 2kW source is comparable to the result of a 4kW conventional machine.

ENSIS-3015 AJ is equipped with the AMNC 3i NC and a new touch screen interface providing a user friendly, ergonomic solution. The ease of use has been dramatically increased, allowing the user to increase productivity through less operator intervention.

In the constant challenging business environment of the sheet-metal industry, getting the most productive tools is a key to open the door to new market segments.

Adding automation modules to a machine such as ENSIS-3015 AJ is a well proven step towards productivity and higher competitiveness.The standard 2 pallet shuttle table can be replaced by an MPF or an ASF-EU automation system.

The new ENSIS AJ source allows the machine to cut continuously from thin-to-thick material without changing the lens. A variable control unit adapts the beam to the material. Furthermore AMADA know-how in laser source development allows the source size to be reduced and integrated into the machine structure, saving space on the floor.

CONTINUOUS OPERATION HIGH QUALITY, PERFORMANCE AND ENERGY SAVING

ENHANCED PROGRAMMING SOLUTIONS MODULES FOR PRODUCTIVITY

21

3 4

CONTINUOUSLY FROM THIN-TO-THICK

NEW NC AMNC 3i AUTOMATION OPTIONS

"LESS IS MORE"

DIMENSIONS

F013-EU02en – September 2014 – © AMADA EUROPE HQ. All rights reserved.

Unit : mm

ENSIS-3015 AJ

NC AMNC 3i

Axis travel methodX & Y axes Helical rack

Z axis Ball screw

Axis control methodX, Y, Z axes

(three axes controlled simultaneously) + B axis

Axis travel distance mm (X) 3070 x (Y) 1550 x (Z) 100Maximum processing dimensions mm (X) 3070 x (Y) 1550 x (Z) 100Rapid feed rate: Combination X/Y m/min 170Positioning accuracy* mm ±0.01Repeatable positioning accuracy* mm ±0.005Processing feed rate, XxY m/min (0 ~ 120) x (0 ~ 120)Least input increment mm 0.001Maximum material mass kg 920Processing surface height mm 940Mass of machine (main unit only) kg 11000

LST-3015Max. material dimensions mm (X) 3050 x (Y) 1525

Number of pallets 2Working surface height mm 940Max. material mass kg 920Skid pitch mm 75

ENSIS 2000

Beam generation Laser diode-pumped fibre laser

Maximum power W 2000Stability % ±2.00Pulse peak power W 2000Pulse frequency Hz 1 ~ 10000Duty % 1~100Wavelength μm 1.08

MACHINE SPECIFICATIONS SHUTTLE TABLE SPECIFICATIONS

OSCILLATOR SPECIFICATIONS

* Specifications of accuracy are in conformance with the VDI/DGQ 3441.The accuracy of the workpiece and the thickness of the material that can be cut, is dependent on the cutting conditions, the material, the type of workpiece, its pretreatment, the size of the panel as well as the position in the working area.

For your safe useBe sure to read the user manual carefully before use.When using this product, appropriate personal protection equipment must be used.

This laser product uses a Class 4 invisible laser for processing and a Class 3R visible laser for positioning.Class 4 invisible laser: avoid eye or skin exposure or direct or scattered radiation. Never look into the laser beam or allow skin contact.Class 3R visible laser: avoid direct eye exposure.

The official model name of the machines and units described in this catalogue are non-hyphenated like ENSIS3015AJ. Use this registered model names when you contact the authorities for applying for installation, exporting, or financing.The hyphenated spellings like ENSIS-3015 AJ are used in some portions of the catalogue for sake of readability. This also applies to other machines. Hazard prevention measures are removed in the photos used in this catalogue.

ENSIS-3015 AJ + shuttle table (LST)(L) 10040 x (W) 2840 x (H) 2240

W

H

L

Specifications, appearance, and equipment are subject to change without notice by reason of improvement.

AMADA UK LTD.Spennells Valley Road,Kidderminster,Worcestershire DY10 1XSUnited KingdomTel: +44 (0)1562 749500Fax: +44 (0)1562 749510www.amada.co.uk

AMADA GmbHAmada Allee 142781 HaanGermany

Tel: +49 (0)2104 2126-0Fax: +49 (0)2104 2126-999www.amada.de

AMADA SA Paris Nord II96, avenue de la Pyramide93290 Tremblay en FranceFranceTél : +33 (0)1 49 90 30 00Fax : +33 (0)1 49 90 31 99www.amada.fr

AMADA ITALIA S.r.l.Via Amada I., 1/329010 Pontenure (Piacenza) ItaliaTel: +39 (0)523 872111Fax: +39 (0)523 872101www.amada.it