Landis & Gyr Z45 M10 Type 5235A
1
Landis & Gyr – Z45 M10 type 5235A Applying the OptiSmart Optical Reader to the above meter • Remove the adhesive back and place the supplied metal washer over the LED lens as shown in the above picture. • When the washer is secure place the OptiSmart optical head onto the washer. • The LED on the OptiSmart optical head will flash in time with the impulse output of your electricity meter to confirm it is reading correctly. • Next connect the cable running from the OptiSmart optical head into the side of the supplied white Transmitter unit. OptiSmart meter location
-
Upload
richard-smith -
Category
Documents
-
view
128 -
download
6
description
Electric meter, smartmeter, non-smartmeter, british gas, non-wireless
Transcript of Landis & Gyr Z45 M10 Type 5235A
Landis & Gyr – Z45 M10 type 5235A
Applying the OptiSmart Optical Reader to the above meter
• Remove the adhesive back and place the supplied metal washer over the LED lens as shown in the above picture.
• When the washer is secure place the OptiSmart optical head onto the
washer.
• The LED on the OptiSmart optical head will flash in time with the impulse output of your electricity meter to confirm it is reading correctly.
• Next connect the cable running from the OptiSmart optical head into the
side of the supplied white Transmitter unit.
OptiSmart meter location