LAMPHOLDERS LINEAR FLUORESCENT - Etlin...
Transcript of LAMPHOLDERS LINEAR FLUORESCENT - Etlin...
SECTION ELINEAR FLUORESCENT LAMPHOLDERSFluorescent Lamp Shapes and Bases E2
T5 (G5) Miniature Bi Pin E3 - E8
T8/T10/T12 (G13) Medium Bi Pin E9 - E23
Turret Lampholders E22
Circline (G10Q) Lampholders E24
Fluorescent Starters, Starter Bases & Accessories E25 - E28
LINEA
R FLU
OR
ESCEN
TLA
MPH
OLD
ERS
®
C US C US®
D1
LINEAR
FLUO
RESC
ENT
LAMPH
OLD
ERS
E2
LINEAR FLUORESCENT LAMPHOLDERS
LINEAR FLUORESCENT LAMP SHAPES AND LAMP BASE
FLUORESCENT LAMP SHAPES FLUORESCENT LAMP BASE
T-5 MINIATURE BIPIN
T-6 SINGLE PIN SLIMLINE
T-8 MEDIUM BIPIN
T-8 SINGLE PIN SLIMLINE
T-10 MEDIUM BIPIN
T-12 MEDIUM BIPIN
T-12 SINGLE PIN SLIMLINE
T-12 RECESSED DOUBLE CONTACT
T-8/T-12 MEDIUM BIPIN U-BENT
T-9/T-10 4-PIN CIRCLINE
T-5 MINIATUREBIPIN (G5)
T-8, T-10, T-12MEDIUM BIPIN (G13)
T-8, T-10, T-12RECESSED DOUBLECONTACT (R17d)
T-6, T-8, T-12SLIMLINE SINGLE PIN (FA8)
4-PIN CIRCLINE(G10Q)
2D 4-PIN(2G13)
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
®
C US C US®
LINEAR
FLUO
RESC
ENT
LAMPH
OLD
ERS
E3
LINEAR FLUORESCENT LAMPHOLDERS
T-5
T-5
G5
G5
FL261 T-5 Snap-In Mount
FL265 T-5 Snap-In / Screw Mount / FL265-S Shunted Version
FLUORESCENT SOCKET MINIATURE BI-PIN T5 LAMPHOLDERS
- White polycarbonate body, rated 110°C- Double edge contacts hold lamp securely- Ideal for mirror cases and display lighting- Quick connect push-in wire terminals for 18 AWG solid, Twist & Tin, or solder dipped wire, stripped 5⁄16”
- White polycarbonate body, rated 110°C- Double edge contacts hold lamp securely- Ideal for mirror cases and display lighting- Quick connect push-in wire terminals for 18 AWG solid, Twist & Tin, or solder dipped wire, stripped 5⁄16”
- Snap-in mount- Rated 120W, 600V- cCSAus Certified / cULus Listed
- Screw mount or snap-in mount into a 0.020” – 0.040” (0.5 mm – 1 mm) panel thickness- Rated 120W, 600V- cCSAus Certified / cULus Listed
9.0 [0.354]
21.4
[0.8
43]
19.0 [0.748]
10.5
[0.4
13]
11.7 [0.461]10.3 [0.406]
2.81 [0.110] 0.708"(18.0)
0.125" DIA(3.2)
Suggested Mounting
13.5
[0.53
1]
17.6 [0.691]
22.0 [0.866]
0.3 [0
.012]
16.5 [0.650]
9.5 [0.374]
2.5 [0
.098]
26.0
[1.02
4]
5.0 [0
.197]
3.5 [0.138]
0.140" (3.5)
Screw MountSnap In Mount
0.381" ± 0.008(9.7 ± 0.2)
0.77
6" ±
0.0
08(1
9.7
± 0.
2)
PANEL CUTOUT
*ADD suffix “S” to part number for shunted version
T-5
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
®
C US C US®
D1
LINEAR
FLUO
RESC
ENT
LAMPH
OLD
ERS
E4
LINEAR FLUORESCENT LAMPHOLDERS
T5 LINEAR LAMPS
T-5
T-5
FL621
FL622 FL622-L FL622-N
FL621 Snap-in Screw Mount
FL621-N Snap-in Screw Mount, Locating Nib
FL621-S Snap-in Screw Mount, Shunted
FL621-SN Snap-in Screw Mount, Shunted, Locating Nib
FL621-N
G5
G5
FL621 SERIES T-5 Tall Profile, Rotary Lock, Snap-in Screw Mount
FL622 SERIES T-5 Medium / Short Profile, Rotary Lock, Snap-in, Screw Mount - Continued on next page
FLUORESCENT SOCKET MINIATURE BI-PIN T5 LAMPHOLDERS
- White polycarbonate body, rated 110°C- Locking rotor design for maximum lamp retention- Snap-in mount or screw mount to panel- Quick connect push-in wire terminals for 18 AWG solid wire, stripped 5⁄16”- Twin wireways for easy harness wiring
- White polycarbonate body, rated 110°C- Locking rotor design for maximum lamp retention- Snap-in mount or screw mount to panel- Quick connect push-in wire terminals for 18 AWG solid wire, stripped 5⁄16”- Twin wireways for easy harness wiring
- Wires from bottom of lampholder- Snap-in mounts into a 0.023” – 0.040” (0.6 mm to 1.0 mm) panel thickness- Rated 120W, 600V; suitable for HO lamps- cCSAus Certified / cULus Listed
- Wires from bottom of lampholder- Snap-in mounts into a 0.023” – 0.040” (0.6 mm to 1.0 mm) panel thickness- Rated 120W, 600V; suitable for HO lamps- cCSAus Certified / cULus Listed
0.118"(3.0)
Screw MountSnap In Mount
0.393"(10.0)
0.787"(20.0)
PANEL CUTOUT
0.118"(3.0)
Screw MountSnap In Mount
0.393"(10.0)
0.787"(20.0)
PANEL CUTOUT
0.374" (9.5)
0.63
0" (1
6.0)
0.09
8" (2
.5)
0.99
2" (2
5.2)
0.866" (22.0)
1.48
0" (3
6.7)
0.630" (16.0)
0.362" (9.2)
0.866" (22.00)
0.99
2" (2
5.20
)
0.748" (19.00)
0.49
" (12
.48)
0.09
8" (2
.50)
0.36" (9.20)
0.754" (19.15)0.281" (7.15)
1.48
" (37
.60)
0.75
4" (1
9.15
)
0.134" (3.40)
0.283" (7.20)
0.374" (9.5)
0.63
0" (1
6.0)
0.09
8" (2
.5)
0.99
2" (2
5.2)
0.866" (22.0)
1.48
0" (3
6.7)
0.630" (16.0)
0.362" (9.2)
0.866" (22.00)
0.99
2" (2
5.20
)
0.748" (19.00)
0.49
" (12
.48)
0.09
8" (2
.50)
0.36" (9.20)
0.754" (19.15)0.281" (7.15)
1.48
" (37
.60)
0.75
4" (1
9.15
)
0.134" (3.40)
0.283" (7.20)
T-5
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
®
C US C US®
D1
LINEAR
FLUO
RESC
ENT
LAMPH
OLD
ERS
E5
LINEAR FLUORESCENT LAMPHOLDERS
FLUORESCENT SOCKET MINIATURE BI-PIN T5 LAMPHOLDERS
FL622 Snap-in Screw Mount
FL622-L Snap-in Screw Mount, Short Body, Low Profile
FL622-N Snap-in Screw Mount, Locating Nib
FL622-LN Snap-in Screw Mount, Short Body, Locating Nib
FL622L-BSI T5 Medium, Short Profile, Rotary Lock, Bottom Snap-in
FL622-S Snap-in Screw Mount, Shunted
FL622-LS Snap-in Screw Mount, Short Body, Shunted, Low Profile
FL622-SN Snap-in Screw Mount, Shunted, Locating Nib
FL622-LSN Snap-in Screw Mount,Short Body, Shunted, Locating Nib
FL622L-BSI-S T5 Medium, Short Profile, Rotary Lock, Bottom Snap-in, Shunted
0.78
7" (2
0.0)
0.866" (22.0)
0.09
8" (2
.5)
0.362" (9.2)
1.27
6" (3
2.4)
0.630" (16.0)
0.37
4" (9
.5)
0.886" (22.5)
0.07
9" (2
.0)
0.354" (9.0)
1.05
9" (2
6.9)
0.442" (11.23)
0.65
0" (1
6.50
)
0.28
3" (7
.20)
0.59
1" (1
5.00
)
0.276" (7.00)0.650" (16.50)
0.748" (19.00)
0.866" (22.0)
0.09
8" (2
.5)
0.362" (9.2)
1.27
6" (3
2.4)
0.134" (3.40)
0.75
4" (1
9.15
)
0.28
3" (7
.20)
0.78
7" (2
0.00
)
0.281" (7.15)0.754" (19.15)
0.748" (19.00)
0.59
1" (1
5.00
)
0.886" (22.50)
0.09
8" (2
.50)
0.748" (19.00)
0.276" (7.00)0.650" (16.50)
0.354" (9.00)
1.05
9" (2
6.90
)
0.134" (3.40)
0.28
3" (7
.20)
0.75
4" (1
9.15
)
4 (0.157)
0.7
(0.0
28) 13.20 (0.519)
20.5 (0.807)
14.5 (0.571)
15.8
(0.6
22)
9.2 (0.362)
27.5
(1.0
83)
13.4
(0.5
28)
19.2 (0.756)
0.78
7" (2
0.0)
0.866" (22.0)
0.09
8" (2
.5)
0.362" (9.2)
1.27
6" (3
2.4)
0.630" (16.0)
0.37
4" (9
.5)
0.886" (22.5)
0.07
9" (2
.0)
0.354" (9.0)
1.05
9" (2
6.9)
0.442" (11.23)
0.65
0" (1
6.50
)
0.28
3" (7
.20)
0.59
1" (1
5.00
)
0.276" (7.00)0.650" (16.50)
0.748" (19.00)
0.866" (22.0)
0.09
8" (2
.5)
0.362" (9.2)
1.27
6" (3
2.4)
0.134" (3.40)
0.75
4" (1
9.15
)
0.28
3" (7
.20)
0.78
7" (2
0.00
)
0.281" (7.15)0.754" (19.15)
0.748" (19.00)
0.59
1" (1
5.00
)
0.886" (22.50)
0.09
8" (2
.50)
0.748" (19.00)
0.276" (7.00)0.650" (16.50)
0.354" (9.00)
1.05
9" (2
6.90
)
0.134" (3.40)0.
283"
(7.2
0)
0.75
4" (1
9.15
)
19.20 (0.756)
13.20 (0.519)
14.50 (0.571)5 (0.197)
0.7
(0.0
28)
27.5
(0.1
083)
15.8
(0.6
22)
13.4
(0.5
28) 9.2 (0.362)
20.5 (0.807)SHUNTED
T-5
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
FL622 SERIES T-5 Medium / Short Profile, Rotary Lock, Snap-in, Screw Mount - Continued
®
C US C US®
D1
LINEAR
FLUO
RESC
ENT
LAMPH
OLD
ERS
E6
LINEAR FLUORESCENT LAMPHOLDERS
T-5
T-5
T-5
G5
G5
G5
FL641 Rotary Lock, Rear Snap-in Mount / FL641-S Shunted Version
FL641-SP Rotary Lock, Rear Snap-in Mount with Spring Plate / FL641-S-SP Shunted Version
FL641-V Rotary Lock, Vertical Snap-in Mount / FL641-V-S Shunted Version
FLUORESCENT SOCKET MINIATURE BI-PIN T5 LAMPHOLDERS
- White polycarbonate body, rated 110°C- Locking rotor design for maximum lamp retention- Twin wireways for easy harness wiring.- Wires from bottom of lampholder- Quick connect push-in wire terminals for 18 AWG solid, Twist & Tin, or solder dipped wire, stripped 5⁄16”
- White polycarbonate body, rated 110°C- Locking rotor design for maximum lamp retention- Twin wireways for easy harness wiring.- Spring plate allows for 0.08” (2 mm) lamp length tolerance- Wires from bottom of lampholder
- White polycarbonate body, rated 110°C- Locking rotor design for maximum lamp retention- Twin wireways for easy harness wiring.- Wires from bottom of lampholder- Quick connect push-in wire terminals for 18 AWG solid, Twist & Tin, or solder dipped wire, stripped 5⁄16”
- Horizontal mounting pins snap in to panel for fast and easy installation- For 0.023” – 0.040” (0.6 mm to 1.0 mm)- Rated 120W, 600V; suitable for HO lamps- cCSAus Certified / cULus Listed
- Quick connect push-in wire terminals for 18 AWG solid, Twist & Tin, or solder dipped wire, stripped 5⁄16”- Horizontal mounting pins snap in to panel for fast and easy installation- For 0.023” – 0.040” (0.6 mm to 1.0 mm)- Rated 120W, 600V; suitable for HO lamps- cCSAus Certified / cULus Listed
- Vertical mounting pins snap in to panel for fast and easy installation- For 0.023” – 0.040” (0.6 mm to 1.0 mm)- Rated 120W, 600V; suitable for HO lamps- cCSAus Certified / cULus Listed
0.75" (19.00)0.
866"
(22.
0)0.51" (13.0)
0.36" (9.20)0.93" (23.70)
0.48
" (12
.20)
0.933" (23.7)
0.146" DIA(3.7)
PANEL CUTOUT
0.35" (9.00)
0.93" (23.70)
0.54
" (13
.80)
0.35" (9.00)14.60 [0.57]
0.36" (9.20)1.07" (27.20)
0.86
6" (2
2.0)
0.75" (19.00)
0.933" (23.7)
0.146" DIA(3.7)
PANEL CUTOUT
0.75" (19.0)
0.87
" (2
2.0)
0.47" (12.0)
0.49
" (1
2.5)
0.35
" (9
.0)
0.37" (9.4)
0.71
" (1
8.0)
0.36" (9.2)0.05" (1.20)
0.69" (17.4)
T-5
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
®
C US C US®
D1
LINEAR
FLUO
RESC
ENT
LAMPH
OLD
ERS
E7
LINEAR FLUORESCENT LAMPHOLDERS
T-5
T-5
G5
G5
FL641-VSP Rotary Lock, Vertical Snap-in Mount with Spring Plate / FL641-VSPS Shunted Version
FLG5HO-PH T5 Plunger End Lampholder / FLG5HO-FH T5 Fixed End Lampholder
FLUORESCENT SOCKET MINIATURE BI-PIN T5 LAMPHOLDERS
- White polycarbonate body, rated 110°C- Locking rotor design for maximum lamp retention- Twin wireways for easy harness wiring.- Spring plate allows for 0.08” (2 mm) lamp length tolerance- Wires from bottom of lampholder
- White polycarbonate body- For regular and HO T5 lamps- Flexible snap-in wings for quick, easy insertion into panel- Quick connect push-in wire terminals accept 18 AWG solid or solder dipped leads, stripped 3⁄8
- Quick connect push-in wire terminals for 18 AWG solid, Twist & Tin, or solder dipped wire, stripped 5⁄16”- Vertical mounting pins- For 0.023” – 0.040” (0.6 mm to 1.0 mm)- Rated 75W, 600V; suitable for HO lamps- cCSAus Certified / cULus Listed
- Horizontal Bi-Pin Contact- Quick connect push-in wire terminals for 18 AWG solid, Twist & Tin, or solder dipped wire, stripped 5⁄16”- Two wire ports per terminal to speed harness wiring- Rated 120W, 600V; suitable for HO lamps- cCSAus Certified / cULus Listed
0.47" (12.0)
0.8
7"
(22
.0)
0.4
9"
(12
.5)
0.75" (19.0) 0.36" (9.2)
0.11" (2.8)
0.37" (9.4)
0.7
1"
(18
.0)
0.32" (8.0)
0.69" (17.4)
0.3
5"
(9.0
)PANEL CUTOUTFIXEDPLUNGER PANEL CUTOUTFIXEDPLUNGER
T-5
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
®
C US C US®
D1
LINEAR
FLUO
RESC
ENT
LAMPH
OLD
ERS
E8
LINEAR FLUORESCENT LAMPHOLDERS
T5 LINEAR LAMPS
T-5
FL020-T FL022
FL020 / FL020-T
FL022 / FL022-T
FL026 / FL026-T
FL021 / FL021-T
FL025 / FL025-T
FL027 / FL027-T
FL026-T
G5
FL020 SERIES
FLUORESCENT SOCKET MINIATURE BI-PIN T5 LAMPHOLDERS
- White polycarbonate body, rated 110°C- Double edge contacts hold lamp securely- Ideal for mirror cases and display lighting- Two wire ports per terminal for easy harness wiring- Models FL020, FL020-T; FL021, FL021-T; FL022, FL022-T have 9” 18 AWG TEWN solid wires attached, stripped 1⁄2”- Models FL025,FL025-T; FL026, FL026-T; and FL027,FL027-T have Quick connect
push-in wire terminals for 18 AWG solid, Twist & Tin, or solder dipped wire, stripped at 5⁄16”- Various brackets and mounting holes are available (see drawings)- “T” in part number stands for tapped bracket 6/32” TAP- Rated 120W, 600V- cCSAus Certified / cULus Listed
.150"(3.8)
23.1 [0.909]18.3 [0.720]
ø 3.8 [0.150]#6-32 Tapon FL-020-T27.0 [1.065]
15.9 [0.626]
33.7 [1.327]
8.9 [0.350]9.2 [0.362]
18.3 [0.720]
15.9 [0.626]
8.7 [0.343]
16.3
[0.64
2]
23.0
[0.90
6]
8.9 [0.350]8.0 [0.315]
17.5 [0.689]
24.1 [0.950]
ø 3.8 [0.150]#6-32 Tapon FL-022-T
18.3 [0.720]23.0 [0.906]
20.5 [0.807]
8.5 [0.335]9.2 [0.362]
18.8 [0.740]
34.6 [1.362]27.6 [1.087] ø 3.8 [0.150]
#6-32 Tapon FL-026-T
15.9 [0.626]
8.7 [0.343]
20.2 [0.795]13.5 [0.531]
5.4 [0.213]8.9 [0.350]
18.3 [0.720]14.9 [0.587]
ø 3.8 [0.150]#6-32 Tapon FL-021-T
18.8 [0.740]
14.5 [0.571]
8.7 [0.343]
3.6 [0.142]
9.2 [0.362]
20.5 [0.807]
17.5 [0.689]13.4 [0.528]
ø3.8 [0.150]#6-32 Tapon FL-025-T
21.5 [0.846]
18.8 [0.740]
21.8 [0.858]28.8 [1.134]
9.3 [0.366]9.2 [0.362]
20.5 [0.807]
19.1 [0.752]24.2 [0.953]
ø 3.8 [0.150]#6-32 Tapon FL-027-T
T-5
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
MOUNTINGHOLE
®
C US C US®
D1
LINEAR
FLUO
RESC
ENT
LAMPH
OLD
ERS
E9
LINEAR FLUORESCENT LAMPHOLDERS
FLUORESCENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T-8 / T-12 LAMPS
T-8
T-12 G13
FL005 SERIES Low Profile Turn Type Lampholders
- White polycarbonate body, rated 110°C- Turn lock type, low profile- Quick connect push-in wire terminals for 18 AWG solid wire 5⁄16”- Two wire ports per terminal for easy harness wiring- For a 0.023” - 0.040” (0.6 mm - 1.0 mm) panel thickness
- Available shunted for use with instant start electronic ballasts; saves time and makes wiring easier- Many models to choose from- Rated 660W, 600V, suitable for all new HO lamps- cCSAus Certified / cULus Listed
FL005 FL005-WN FL005-WS Standard
.38"(9.65)
1.01
"
(25.
65)
Push-In
(9.65)
(25.
65)
.38"
1.01
"
PANEL CUTOUTS
* Add “-S” after product code for internal shunted version ∆ Screws are packed separately. Also available assembled, add Suffix “-A” after “C” in part number.
T-8T-12
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
25.4 [1.000]
1.1 [0
.043]
1.1 [0
.043]
9.5 [0
.374]
22.2
[0.87
4] 8.7 [0.343]
18.0 [0.709]
9.5 [0
.374]
42.0
[1.65
4]
FL005* Solid Shoulder, Standard Profile
FL005-C*∆ Solid Shoulder with Captive Nut
25.4 [1.000]
1.1 [0
.043]
22.2
[0.87
4]9.5
[0.37
4]
8.7 [0.343]
18.0 [0.709]
4.0 [0.157]
9.5 [0
.374]
42.0
[1.65
4]
FL005-S* Solid Shoulder Shunted
25.40 [1.00]
1.10
[1.0
4]
1.10
[1.0
4]
22.2
0 [0
.87]
9.50
[0.3
7]
9.50
[0.3
7]
42.0
0 [1
.65]
8.70 [0.34]
FL005-SC* Shunted with Captive Nut
25.40 [1.00]
1.10
[1.0
4]
1.10
[1.0
4]
22.2
0 [0
.87]
9.50
[0.3
7]
9.50
[0.3
7]
8.70 [0.34]
18.00 [0.71]
42.0
[1.6
54]
FL005-W* Flexible Snap-in Shoulder
22.2
0 [0
.874
]
0.38
[0.0
15]
25.40 [1.000]
31.70 [1.248]
9.50
[0.3
74]
18.00 [0.709]
8.70 [0.343]
42.0
0 [1
.654
]
FL005-WC*∆ Flexible Snap-in Shoulder, Captive Nut
8.70 [0.343]
18.00 [0.709]
9.50 [
0.374
]
42.00
[1.65
4]
25.40 [1.000]
22.20
[0.87
4]
0.38 [
0.015
]
31.70 [1.248]
FL005-WN* Snap-in Shoulder with Locating nib
25.40 [1.000]
22.20
[0.87
4]5.5
0 [0.2
17]
1.10 [
0.043
]
0.38 [
0.015
]
9.50 [
0.374
]
12.30 [0.484]
32.50
[1.28
0]
42.00
[1.65
4]
18.00 [0.709]
8.70 [0.343]
FL005-WS* Flexible Snap-in Shoulder, Shunted
25.40 [1.00]8.70 [0.343]
18.00 [0.71]
22.20
[0.87
]
0.38 [
0.01]
9.50 [
0.37]
42.00
[1.65
]
FL005-WSC* Flexible Snap-in Shoulder, Shunted Captive Nut
22.20
[0.87
]
25.40 [1.00] 8.70 [0.34]
0.38 [
0.01]
9.50 [
0.374
]
18.00 [0.709]
42.00
[1.65
]
®
C US C US®
D1
LINEAR
FLUO
RESC
ENT
LAMPH
OLD
ERS
E10
LINEAR FLUORESCENT LAMPHOLDERS
FLUORESCENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T-8 / T-12 LAMPS
T-8
T-12 G13
FL006-L SERIES Low Profile
FL006-L SERIES Low Profile
- White polycarbonate body, rated 110°C- Turn lock type, low profile- Quick connect push-in wire terminals for 18 AWG solid wire 5⁄16”- Two wire ports per terminal for easy harness wiring- For a 0.023” - 0.040” (0.6 mm - 1.0 mm) panel thickness
- Available shunted for use with instant start electronic ballasts; saves time and makes wiring easier- Many models to choose from- Rated 660W, 600V, suitable for all new HO lamps- cCSAus Certified / cULus Listed- Circle I s5487 for shunted version(s)
FL006-L* ∆ Snap-in or Slot on Mount, 18 or ga. Panel
FL006-LSI* FL006-LSP*
* Add “-S” after product code for internal shunted version
∆ Add “-C” after product code for captive nut on models with nut slot
Standard
.38"(9.65)
1.01
"
(25.
65)
Push-In
(9.65)
(25.
65)
.38"
1.01
"
PANEL CUTOUTS
Standard
.38"(9.65)
1.01
"
(25.
65)
Push-In
(9.65)
(25.
65)
.38"
1.01
"
PANEL CUTOUTS
1.20
[0.0
5]
1.10 [0.04]
16.7
0 [0
.58]
9.50
[0.3
7]
9.00 [0.35]
38.9
0 [1
.53]
31.70 [1.25]
18.0
0 [0
.71]
25.00 [0.98]
12.7
0 [0
.50]
25.00 [0.98]
9.00 [0.35]
30.20 [1.19]
12.2
0 [0
.40]
12.3
0 [0
.48]
27.0
0 [1
.06]
9.00 [0.35]
18.00 [0.71]
38.90
[1.53
]
9.50 [
0.37]
16.70
[0.66
]1.1
0 [0.0
4]
0.40 [
0.02]
27.0
0 [1
.06]
25.00 [0.98]
14.3
0 [0
.56]
12.8
0 [0
.50]
30.20 [1.19]
9.00 [0.35]
27.0
0 [1
.06]
9.00 [0.35]
18.00 [0.71]
38.90
[1.53
]
9.50 [
0.37]
16.70
[0.66
]1.1
0 [0.0
4]
0.40 [
0.02]
FL006-LSI* Rear Snap-in, Horizontal Pins
FL006-LW* Slot on or Snap in winged
FL006-LSP* Rear snap-in, Horizontal Pin, with Spring Plate
FL006-LWS* Slot on or snap in winged, shunted
* Add “-S” after product code for internal shunted version∆ Screws are packed separately. Also available assembled, add Suffix “-A” after “C” in part number.
T-8T-12
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
* Add “-S” after product code for internal shunted version ∆ Add “-C” after product code for captive nut on models with nut slot
®
C US C US®
D1
LINEAR
FLUO
RESC
ENT
LAMPH
OLD
ERS
E11
LINEAR FLUORESCENT LAMPHOLDERS
FLUORESCENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T-8 / T-12 LAMPS
T-8
T-12 G13
FL006-L SERIES
FL006 SERIES Tall Profile T-8 / T-12 Lampholders
- White polycarbonate body, rated 110°C- Turn lock type, low profile- Quick connect push-in wire terminals for 18 AWG solid wire 5⁄16”- Two wire ports per terminal for easy harness wiring- For a 0.023” - 0.040” (0.6 mm - 1.0 mm) panel thickness
- Available shunted for use with instant start electronic ballasts; saves time and makes wiring easier- Many models to choose from- Rated 660W, 600V, suitable for all new HO lamps- cCSAus Certified / cULus Listed- Circle I s5487 for shunted version(s)
FL006* ∆ FL006-A
* Add “-S” after product code for internal shunted version
∆ Add “-C” after product code for captive nut on models with nut slot
* Add “-S” after product code for internal shunted version
∆ Add “-C” after product code for captive nut on models with nut slot
Standard
.38"(9.65)
1.01
"
(25.
65)
Push-In
(9.65)
(25.
65)
.38"
1.01
"
PANEL CUTOUTS
30.2
[1.1
89]
29.8 [1.173]
31.7 [1.248]
25.0 [0.984]
53.0
[2.0
87]
18.2 [0.717]
8.0
[0.3
15]
1.3
[0.0
51]
8.7 [0.343]
25.0 [0.984]
30.2
[1.1
89]
3.7 [0.146]
53.0
[2.0
87]
5.0 [0.197]
18.2 [0.717]
8.7 [0.343]
FL006* ∆ Solid Shoulder, Nut Slot, Slot Mount, 18 ga. Panel FL006-A Flush Sides, Mount Using Self Threading Screw
FL006-L SERIES Low Profile Continued
FL006-LB* ∆ FL006-LBX* ∆ Standard
.38"(9.65)
1.01
"
(25.
65)
Push-In
(9.65)
(25.
65)
.38"
1.01
"
PANEL CUTOUTS
25.00 [0.98]
7.94 [0.31]
16.7
0 [0
.66]
1.30
[0.0
5]
3.50 [0.14]
8.70 [0.34]
30.9
6 [1
.22]
18.20 [0.72]
38.9
0 [1
.53]
31.70 [1.25]
4.50
[0.1
8]
25.00 [0.98]
16.7
0 [0
.66]
9.00 [0.35]
3.50
[0.1
4]
18.20 [0.72]
8.70 [0.34]
38.9
0 [1
.53]
30.9
6 [1
.22]
4.30 [0.17]
4.85
[0.1
9]
FL006-LB* ∆ Slot on Mount, 18 ga. Panel FL006-LBX* ∆ No Shoulders, Nut Slot
T-8T-12
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
®
C US C US®
D1
LINEAR
FLUO
RESC
ENT
LAMPH
OLD
ERS
E12
LINEAR FLUORESCENT LAMPHOLDERS
FL007 Butt-on Side Slots
FL007-A Butt-on Centre Hole, Screw Mount
FL007-B Butt-on Mounting Bracket, 0.157” Clearance Hole
FL007B-TC Butt-on Mounting Bracket, with Captive Nut and Screw
FL007-S Butt-on, Side Slots, Shunted
FL007-A-S Butt-on Shunted, Centre Hole, Screw Mount
FL007-B-T* Butt-on Mounting Bracket, #6/32 Hole
6.1 [0
.240]
8.2 [0
.323]
10.3
[0.40
6] 34.7 [1.365]38.1 [1.500]
4.8 [0
.187]
1.0 [0
.039]
34.5 [1.358] 8.9 [0.350]
7.3 [0.287]
36.5
[1.43
7]
14.3
[0.56
3]
36.5
[1.43
7]
7.3 [0.287]
8.9 [0.350]
6.1 [0
.240]
8.2 [0
.323]
10.3
[0.40
6] 34.8 [1.370]
6.1 [0
.240]
38.8
[1.52
8]
5.2 [0.205]
22.8 [0.898]
8.9 [0.350]
34.8 [1.370]25.4 [1.000]
12.6
[0.49
6]
10.3
[0.40
6]8.2
[0.32
3] 26.9
[1.05
9]
10.3
[0.40
6]
34.8 [1.370]
25.4 [1.000]8.2 [0
.323]
6.1 [0
.240]
12.6
[0.49
6]
26.9
[1.05
9]
38.8
[1.52
8]
5.2 [0.205]
22.8 [0.898]
8.9 [0.350]
38.1 [1.500]
4.8 [0
.187]
1.0 [0
.039]
8.9 [0.350]
7.3 [0.287]
36.5
[1.43
7]
6.1 [0
.240]
8.2 [0
.323]
10.3
[0.40
6]
34.5 [1.358]
34.7 [1.365]
14.3
[0.56
3]
34.8 [1.370]8.2 [0
.323]
10.3
[0.40
6]
6.1 [0
.240]
36.5
[1.43
7]7.3 [0.287]
8.9 [0.350]
34.8 [1.370]
10.3
[0.40
6] 25.4 [1.000]8.2 [0
.323]
6.1 [0
.240]
12.6
[0.49
6]
26.9
[1.05
9]
38.8
[1.52
8]
5.2 [0.205]
22.8 [0.898]
#6-32 TAP
8.9 [0.350]
FLUORESCENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T-8 / T-12 LAMPS
T-8
T-12 G13
FL007 SERIES Butt-on Lampholders- White polycarbonate body, rated 110°C- Turn lock type, low profile- Quick connect push-in wire terminals for 18 AWG solid wire 5⁄16”- Two wire ports per terminal for easy harness wiring- Available with centre hole for butt-on mounting, side slots, mounting grooves or mounting brackets
- Available shunted for use with instant start electronic ballasts; saves time and makes wiring easier- Many models to choose from- Rated 660W, 600V, suitable for all new HO lamps- cCSAus Certified / cULus Listed
FL007 FL007B-TC FL007A
0.290" Deep(7.4)
1.375" Wide(34.9)
PANEL CUTOUT
* Add “-S” after product code for internal shunted version
T-8T-12
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
®
C US C US®
D1
LINEAR
FLUO
RESC
ENT
LAMPH
OLD
ERS
E13
LINEAR FLUORESCENT LAMPHOLDERS
FL010 Solid Shoulder Low Profile
FL010-C Solid Shoulder Captive Nut
FL010-S Solid Shoulder Shunted
FL010-WN Flexible Shoulder with Locating Nib
FL010-W Flexible Snap-in Shoulder
FL010-WC Flexible Snap-in Shoulder, with Captive Nut
FL010-WS Flexible Snap-in Shoulder Shunted
FL010X-CN Low Profile Captive Nut, No Shoulder
22.1
[0.87
0]
25.0 [0.984]
31.7 [1.248]25.0 [0.984]
1.4 [0
.055]
1.0 [0
.039]
40.5
[1.59
4]
7.8 [0.307]
18.3 [0.720]
9.4 [0
.370]
22.1
[0.87
0]
25.0 [0.984]
31.7 [1.248]25.0 [0.984]
1.4 [0
.055]
1.0 [0
.039]
40.5
[1.59
4]
7.8 [0.307]
18.3 [0.720]
9.4 [0
.370]
22.1
[0.87
0]
31.7 [1.248]
0.4 [0
.015]
24.5 [0.965]10.5 [0.415]
40.5
[1.59
4]
18.3 [0.720]
9.4 [0
.370]
7.8 [0.307]
0.4 [0
.015]
22.1
[0.87
0]31.7 [1.248]25.0 [0.984]
24.5 [0.965]
40.5
[1.59
4]
9.4 [0
.370]
18.3 [0.720]
7.8 [0.307]
7.8 [0.307]
18.3 [0.720]40
.5 [1.
594]
9.4 [0
.370]
22.1
[0.87
0]
25.0 [0.984]31.7 [1.248]
0.4 [0
.015]
24.5 [0.965]
0.4 [0
.015]
22.1
[0.87
0]
31.7 [1.248]25.0 [0.984]
24.5 [0.965]
40.5
[1.59
4]
9.4 [0
.370]
18.3 [0.720]
7.8 [0.307]
7.9 [0.313]
18.3 [0.719]
34.1
[1.3
44]
25.40 [1.00]
15.9
[0.6
25]
CAPTIVE NUT
FLUORESCENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T-8 / T-12 LAMPS
T-8
T-12 G13
FL010 SERIES- White polycarbonate body, rated 110°C- Straight-in and “U” lamp applications, self aligning for “U” shaped lamps- Quick connect push-in wire terminals for 18 AWG solid wire 5⁄16”- Two wire ports per terminal for easy harness wiring; double edge contacts- For 0.23” - 0.040” (0.6 mm - 1.0 mm) panel thickness
- Available shunted for use with instant start electronic ballasts; saves time and makes wiring easier- Many models to choose from- Rated 660W, 600V, suitable for all new HO lamps- cCSAus Certified / cULus Listed- Circle I s5487 for shunted version(s)
FL010 FL010-W FL010-WS
PANEL CUTOUTS
.312"(7.93)
.38"(9.65)
1.01
"
(25.
65)
.187"(4.75) Captive Nut Standard
.38"(9.65)
1.01
"
(25.
65)
Push-In
(9.65)
(25.
65)
.38"
1.01
"
Locating Nib Hole(if required)
T-8T-12
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
®
C US C US®
D1
LINEAR
FLUO
RESC
ENT
LAMPH
OLD
ERS
E14
LINEAR FLUORESCENT LAMPHOLDERS
FL011 Solid Shoulder Tall Profile
FL011-S Solid Shoulder Shunted
FL011-C Solid Shoulder Captive Nut
FL011-SC Solid Shoulder Shunted Captive Nut
FL011-W Flexible Snap-in Shoulder
FL011-WS Flexible Snap-in Shoulder Shunted
FL011-WC Flexible Snap-in Shoulder Captive Nut
FL011-WSC Flexible Snap-in Shoulder Shunted Captive Nut
1.02 [0.040]
49.8
0 [1
.961
]
34.00 [1.339] 18.20 [0.717]
1.12[0.044] 9.40
[0.3
70]
8.50 [0.335]29.00 [1.142]
1.02 [0.040]1.12[0.044]
1.02 [0.040]1.12[0.044]
9.40
[0.3
70]
49.8
0 [1
.961
]
34.00 [1.339] 18.20 [0.717]
8.50 [0.335]29.00 [1.142]
1.02 [0.040]1.12[0.044]
4.4 [0.173]25.08 [0.987] 8.5 [0.335]
25.4 [1.000]35.0 [1.378]
30.3
[1.1
93]
1.4
[0.0
55]
1.4
[0.0
55]
18.2 [0.717]
9.4
[0.3
70]
4.8
[0.1
89]
49.8
[1.9
61]
1.1
[0.0
4]
8.5 [0.33]25.4 [1.00]
49.8
[1.9
6]
9.4
[0.3
7]
1.1
[0.0
4]
SHUNT
31.7 [1.25] NUT 17.7 [0.70]
30 [1
.18]
8.5 [0.33]25.4 [1.00]
17.7 [0.70]
30 [1
.18]
1.4
[0.0
6]1.
4 [0
.06]
9.4
[0.3
7]
31.7 [1.25]
49.8
[1.9
6]
8.5 [0.33]25.4 [1.00]
30 [1
.18]
1.4
[0.0
6]1.
4 [0
.06]
31.7 [1.25]
49.8
[1.9
6]
9.4
[0.3
7]
17.7 [0.70]
NUT INSERTED
8.5 [0.33]25.4 [1.00]
30 [1
.18]
1.4
[0.0
6]1.
4 [0
.06]
31.7 [1.25]
49.8
[1.9
6]
9.4
[0.3
7]
17.7 [0.70]
NUT INSERTEDSHUNT
8.5 [0.33]25.4 [1.00]
30 [1
.18]
1.4
[0.0
6]1.
4 [0
.06]
31.7 [1.25]
49.8
[1.9
6]
9.4
[0.3
7]
17.7 [0.70]
FLUORESCENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T-8 / T-12 LAMPS
T-8
T-12 G13
FL011 SERIES- White polycarbonate body, rated 110°C- Turn lock type, low profile- Quick connect push-in wire terminals for 18 AWG solid wire 5⁄16”- Two wire ports per terminal for easy harness wiring- For 0.23” - 0.040” (0.6 mm - 1.0 mm) panel thickness
- Available shunted for use with instant start electronic ballasts; saves time and makes wiring easier- Many models to choose from- Rated 660W, 600V, suitable for all new HO lamps- cCSAus Certified / cULus Listed
FL011 FL011-C FL011-WS
Standard
.38"(9.65)
1.01
"
(25.
65)
Push-In
(9.65)
(25.
65)
.38"
1.01
"
PANEL CUTOUTS
.312"(7.93)
.38"(9.65)
1.01
"
(25.
65)
.187"(4.75)
* Add “-S” after product code for internal shunted version
T-8T-12
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
®
C US C US®
D1
LINEAR
FLUO
RESC
ENT
LAMPH
OLD
ERS
E15
LINEAR FLUORESCENT LAMPHOLDERS
FL030 Solid Shoulders Slot Mount
FL030-W Flexible Snap-in Shoulders
FL030-WSN Flexible Snap-in Shoulders, Shunted with Locating Nib
FL030-C Solid Shoulders Captive Nut Slot Mount
FL030-WS Flexible Snap-in Shoulders, Shunted
18.3 [0.719]
8.7 [0.344]
7.9 [0.313]
34.1
[1.3
44]
1.1
[0.0
43]
29.4 [1.157]
25.4 [1.000]
15.9
[0.6
25] 25.40 [1.000]
24.6
0 [0
.969
]
15.8
8 [0
.625
]
29.20 [1.150] 20.90 [0.823]
8.90 [0.350]
10.1
0 [0
.398
]
24.6
0 [0
.969
]
15.8
8 [0
.625
]
29.20 [1.150] 20.90 [0.823]
8.90 [0.350]
10.1
0 [0
.398
]
25.40 [1.00]
25.4 [1.000].4 [1.157]
1.1 [0
.043] 15
.9 [0.
625]
8.7 [0.344].0 [0.157]
18.3 [0.719]
34.1
[1.34
4]
7.9 [0.313]24
.60
[0.9
69]
15.8
8 [0
.625
]
29.20 [1.150] 20.90 [0.823]
8.90 [0.350]
10.1
0 [0
.398
]
FLUORESCENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T-8 / T-12 LAMPS
FL030 SERIES Low Profile, Self Aligning for U-shaped T8 Lamps
- White polycarbonate body, rated 110°C - For T8 lamps- Straight-in or “U” lamp insertion- Quick connect push-in wire terminals for 18 AWG solid wire 5⁄16”
- Two wire ports per terminal for easy harness wiring; wires from bottom of lampholder- Available internally shunted- Rated 660W, 600V, suitable for HO lamps- cCSAus Certified / cULus Listed
.312"(7.93)
.38"(9.65)
1.01
"
(25.
65)
.187"(4.75)
PANEL CUTOUT
* Add “-S” after product code for internal shunted version Also available assembled, add suffix “-A” after part number
FL030-C FL030-WSN
T-8T-12
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
T-8 & T-12 MEDIUM BIPIN U-BENT
®
C US C US®
D1
LINEAR
FLUO
RESC
ENT
LAMPH
OLD
ERS
E16
LINEAR FLUORESCENT LAMPHOLDERS
FL200 Flexible Snap-in Shoulder
FL200-N Flexible Snap-in Shoulder, Locating Nib
FL200-L Flexible Snap-in Shoulder, Locating Nib, Low Profile
FL200-EL Flexible Snap-in Shoulder, Lamp Entry Left
FL200-S Flexible Shoulder Shunted
FL200-SN Flexible Shoulder Shunted, Locating Nib
FL200-LS Flexible Snap-in Shoulder, Locating Nib, Low Profile, Shunted
0.985" (25.02)
0.878" (22.30)
1.140" (28.96) 0.550" (13.97)
0.344" (8.74)
0.01
5" (0
.38)
1.56
8" (3
9.82
)
0.87
5" (2
2.23
)
0.20
0" (5
.08)
0.09
5" (2
.41)
0.878" (22.30)
0.140" (3.56)0.550" (13.97)
0.860" (21.84)0.344" (8.74)
0.09
5" (2
.41)
0.985" (25.02)
1.140" (28.96)
1.56
8" (3
9.82
)
0.01
5" (0
.38)
0.87
5" (2
2.23
)
0.31
0" (7
.87)
0.20
0" (5
.08)
0.09
5" (2
.41)
28.7 [1.13]24.8 [0.98]
6.5
[0.2
6]
8.25 [0.32]
3.8 [0.15]
8.7 [0.34]
27.8
8 [1
.10]
3.9 [0.15]
15.8
8 [0
.63]
5.6
[0.2
2]
25.42 [1.00]27.7 [1.09]
1.00
" (25
.50)
Lamp Entry
Left Side
0.35" (9.00)
1.50
" (38
.00)
1.14" (29.00) 0.47
" (12
.00)
0.81
" (20
.50)
0.985" (25.02)
0.878" (22.30)
1.140" (28.96) 0.550" (13.97)
0.344" (8.74)
0.01
5" (0
.38)
1.56
8" (3
9.82
)
0.87
5" (2
2.23
)
0.20
0" (5
.08)
0.09
5" (2
.41)
0.878" (22.30)
0.140" (3.56)0.550" (13.97)
0.860" (21.84)0.344" (8.74)
0.09
5" (2
.41)
0.985" (25.02)
1.140" (28.96)
1.56
8" (3
9.82
)
0.01
5" (0
.38)
0.87
5" (2
2.23
)
0.31
0" (7
.87)
0.20
0" (5
.08)
0.09
5" (2
.41)
28.7 [1.13]24.8 [0.98]
6.5
[0.2
6]
8.25 [0.32]
3.8 [0.15]
8.7 [0.34]
27.8
8 [1
.10]
3.9 [0.15]
15.8
8 [0
.63]
5.6
[0.2
2]
25.42 [1.00]27.7 [1.09]
FLUORESCENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T-8 / T-12 LAMPS
T-8
T-12 G13
FL200 SERIES Low Profile, Rotary Lock, T-8 / T-12
- White polycarbonate body, rated 110°C- Rotary type lock, low profile for T8/T10/T12 lamps- Quick connect push-in wire terminals for 18 AWG solid wire 5⁄16”- Two wire ports per terminal for easy harness wiring
- For 0.23” - 0.040” (0.6 mm - 1.0 mm) panel thickness- Many models to choose from- Rated 660W, 600V, suitable for all new HO lamps- cCSAus Certified / cULus Listed
FL200 / FL-200-S FL200-N / FL200-SN FL200-ER FL200-EL
0.360(9.15)
1.004(25.5)
PANEL CUTOUT0.177(4.5)
HOLE FORLOCATING NIB,IF NEEDED
0.312 (7.9)
T-8T-12
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
FL200-ER Flexible Snap-in Shoulder, Lamp Entry Right
1.00
" (25
.50)
Lamp Entry
Right Side
0.35" (9.00)
1.50
" (38
.00)
1.14" (29.00) 0.47
" (12
.00)
0.81
" (20
.50)
®
C US C US®
D1
LINEAR
FLUO
RESC
ENT
LAMPH
OLD
ERS
E17
LINEAR FLUORESCENT LAMPHOLDERS
FL200-ERS Flexible Snap-in Shoulder, Lamp Entry Right Shunted
1.00
" (25
.50)
Lamp Entry
Right Side
0.35" (9.00)
1.50
" (38
.00)
1.14" (29.00) 0.47
" (12
.00)
0.81
" (20
.50)
FL200 SERIES Low Profile, Rotary Lock, T-8 / T-12 (CONTINUED)
F202 Flexible Snap-in Shoulder
FL202-N Flexible Snap-in Shoulder, Locating Nib
FL202-S Flexible Shoulder Shunted
FL202-SN Flexible Shoulders, Locating Nib, Shunted
29.4
6 [1
.160
]
47.0
5 [1
.852
]
28.96 [1.140]
0.38
[0.0
15]
5.08
[0.2
00]
25.02 [0.985]21.84 [0.860]
2.41
[0.0
95]
0.76
[0.0
30]
13.97 [0.550]
8.74 [0.344]
22.30 [0.878]
29.4
6 [1
.160
]
47.0
5 [1
.852
]
7.87
[0.3
10]
28.96 [1.140]
0.38
[0.0
15]
5.08
[0.2
00]
25.02 [0.985]
21.84 [0.860]
3.56 [0.140]
2.41
[0.0
95]
13.97 [0.550]
8.74 [0.344]
22.30 [0.878]
29.4
6 [1
.160
]
47.0
5 [1
.852
]
28.96 [1.140]
0.38
[0.0
15]
5.08
[0.2
00]
25.02 [0.985]21.84 [0.860]
2.41
[0.0
95]
0.76
[0.0
30]
13.97 [0.550]
8.74 [0.344]
22.30 [0.878]
29.4
6 [1
.160
]
47.0
5 [1
.852
]
7.87
[0.3
10]
28.96 [1.140]
0.38
[0.0
15]
5.08
[0.2
00]
25.02 [0.985]
21.84 [0.860]
3.56 [0.140]
2.41
[0.0
95]
13.97 [0.550]
8.74 [0.344]
22.30 [0.878]
FLUORESCENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T-8 / T-12 LAMPS
T-8
T-12 G13
FL202 SERIES Tall Profile, Rotary Lock
- White polycarbonate body, rated 110°C- Rotary type lock, low profile for T8/T10/T12 lamps- Quick connect push-in wire terminals for 18 AWG solid wire 5⁄16”- Two wire ports per terminal for easy harness wiring
- For 0.23” - 0.040” (0.6 mm - 1.0 mm) panel thickness- Many models to choose from- Rated 660W, 600V, suitable for all new HO lamps- cCSAus Certified / cULus Listed
0.360(9.15)
1.004(25.5)
PANEL CUTOUT0.177(4.5)
HOLE FORLOCATING NIB,IF NEEDED
0.312 (7.9)
* Add “-S” after product code for internal shunted version Also available assembled, add suffix “-A” after part number
* Add “-S” after product code for internal shunted version Also available assembled, add suffix “-A” after part number
FL202
T-8T-12
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
FL200-ELS Flexible Snap-in Shoulder, Lamp Entry Left, Shunted
1.00
" (25
.50)
Lamp Entry
Left Side
0.35" (9.00)1.
50" (
38.0
0)
1.14" (29.00) 0.47
" (12
.00)
0.81
" (20
.50)
®
C US C US®
D1
LINEAR
FLUO
RESC
ENT
LAMPH
OLD
ERS
E18
LINEAR FLUORESCENT LAMPHOLDERS
FL204 Flexible Snap-in Shoulder
FL204-N Flexible Snap-in Shoulder, Locating Nib
FL205 Flexible Snap-in Shoulder,T-8 Only
FL205-N Flexible Snap-in Shoulder, T-8 Only, Locating Nib
FL204-S Flexible Shoulder Shunted
FL204-SN Flexible Shoulder Shunted, Locating Nib
FL205-S Flexible Shoulder, Shunted, T-8 Only
FL205-SN Flexible Shoulder, Shunted T-8 Only, Locating Nib
25.00 [0.984]
29.00 [1.142]
37.7
0 [1
.484
]
25.2
0 [0
.913
]
8.80 [0.346]
20.80 [0.819]
10.8
0 [0
.43]
25.00 [0.984]
29.00 [1.142]
37.7
0 [1
.484
]
25.2
0 [0
.913
]
8.80 [0.346]
20.80 [0.819]
10.8
0 [0
.43]
25.00 [0.984]
29.00 [1.142]
45.7
4 [1
.801
]
31.0
4 [1
.222
]
8.80 [0.346]
20.80 [0.819]
10.8
0 [0
.43]
25.00 [0.984]
29.00 [1.142]
45.7
4 [1
.801
]
31.0
4 [1
.22]
8.80 [0.346]
20.80 [0.819]
10.8
0 [0
.43]
25.00 [0.984]
29.00 [1.142]
37.7
0 [1
.484
]
25.2
0 [0
.913
]
8.80 [0.346]
20.80 [0.819]
10.8
0 [0
.43]
25.00 [0.984]
29.00 [1.142]
37.7
0 [1
.484
]
25.2
0 [0
.913
]
8.80 [0.346]
.80 [0.819]
10.8
0 [0
.43]
25.00 [0.984]
29.00 [1.142]
45.7
4 [1
.801
]
31.0
4 [1
.222
]
8.80 [0.346]
20.80 [0.819]
10.8
0 [0
.43]
25.00 [0.984]
29.00 [1.142]
45.7
4 [1
.801
]
31.0
4 [1
.22]
8.80 [0.346]
20.80 [0.819]
10.8
0 [0
.43]
FLUORESCENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T-8 / T-12 LAMPS
T-8
T-12 G13
FL204 SERIES Low Profile / FL205 SERIES Tall Profile
- White polycarbonate body, rated 110°C- Turn type lock, low profile or tall for T8/T10/T12 lamps- Quick connect push-in wire terminals for 18 AWG solid wire 5⁄16”- Two wire ports per terminal for easy harness wiring- For 0.23” - 0.040” (0.6 mm - 1.0 mm)
panel thickness- Available shunted for use with instant start electronic ballasts; saves time and makes wiring easier- Many models to choose from- Rated 660W, 600V, suitable for all new HO lamps- cCSAus Certified / cULus Listed
FL-204
0.360(9.15)
1.004(25.5)
PANEL CUTOUT0.177(4.5)
HOLE FORLOCATING NIB,IF NEEDED
0.312 (7.9)
* Add “-S” after product code for internal shunted version ∆ Add “-C” after product code for captive nut on models with nut slot
FL-204-S FL-205 FL-205-S
T-8T-12
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
®
C US C US®
D1
LINEAR
FLUO
RESC
ENT
LAMPH
OLD
ERS
E19
LINEAR FLUORESCENT LAMPHOLDERS
0.360(9.15)
1.004(25.5)
PANEL CUTOUT0.177(4.5)
HOLE FORLOCATING NIB,IF NEEDED
0.312 (7.9)
FLUORESCENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T-8 / T-12 LAMPS
* Add “-S” after product code for internal shunted version ∆ Add “-C” after product code for captive nut on models with nut slot
FL206* ∆ Solid Shoulder, Slot on Mount 18 or 20 ga. Panel, Nut Slot
FL206X* ∆ Flush Sides, Slot Mount 18 ga. Panel
FL206-BSI* Snap-in Mount from the Top
1.10
[0.0
4]
1.40 [0.06]
16.9
0 [0
.67] 9.00 [0.35]
38.9
0 [1
.53]
31.70 [1.25]
18.0
0 [0
.71]
1.10
[0.0
4]12.50 [0.49]
18.0
0 [0
.71]
9.00 [0.35]
34.1
0 [1
.34] 25.00 [0.98]
T-8
T-8
T-12
T-12
G13
G13
FL206 SERIES Low Profile, Rotary Lamp Lock
FL207 Series Tall Profile Rotary Lamp Lock
- White polycarbonate body, rated 110°C- Rotary type lock, low profile for T8/T10/T12 lamps- Quick connect push-in wire terminals for 18 AWG solid wire 5⁄16”- Two wire ports per terminal for easy harness wiring
- White polycarbonate body, rated 110°C- Rotary type lock, low profile for T8/T10/ T12 lamps- Quick connect push-in wire terminals for 18 AWG solid wire 5⁄16”- Two wire ports per terminal for easy harness wiring
- For 0.23” - 0.040” (0.6 mm - 1.0 mm) panel thickness- Many models to choose from- Rated 660W, 600V, suitable for all new HO lamps- cCSAus Certified / cULus Listed
- Rated 660W, 600V, suitable for all new HO lamps- Many models to choose from- cCSAus Certified / cULus Listed- Circle I s5487 for shunted version(s)
0.360(9.15)
1.004(25.5)
PANEL CUTOUT0.177(4.5)
HOLE FORLOCATING NIB,IF NEEDED
0.312 (7.9)
FL206 FL206-BSI FL206-X
1.40
[0.0
6] 16.9
0 [0
.67]
9.50
[0.3
7]
9.00 [0.35]
38.9
0 [1
.53]
31.70 [1.25]
18.0
0 [0
.71]
FL207 FL207-X-C
T-8T-12
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
®
C US C US®
D1
LINEAR
FLUO
RESC
ENT
LAMPH
OLD
ERS
E20
LINEAR FLUORESCENT LAMPHOLDERS
T5 LINEAR LAMPSFLUORESCENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T-8 / T-12 LAMPS
T-8
T-12 G13
FL421-SP Rear Snap-in Mount with Spring Plate / FL421-S-SP Shunted Version with Spring Plate- White polycarbonate body, rated 110°C- Locking rotor design for maximum lamp retention- Snaps into two holes in panel for fast and easy mounting - Quick connect push-in wire terminals for 18 AWG solid wire 5⁄16”- Spring plate allows for lamp tolerance compensation
- Two wire ports per terminal for easy harness wiring- For 0.23” - 0.040” (0.6 mm - 1.0 mm) panel thickness- Wires from bottom of lampholder- Rated 660W, 600V, suitable for all new HO lamps- cCSAus Certified / cULus Listed
24.2 [0.953]
32.9 [1.295]
27.8 [1.094]
15.2 [0.598] 13.0
[0.5
12]
10.3 [0.406]
27.3 [1.075]
PANEL CUTOUT
(26mm +/- 0.1mm)
(4.6mm +/- 0.1mm)
T-8
T-12 G13
FL421 T-8 / T-12 Rear Snap-in Mount / FL421-S Shunted Version
- White polycarbonate body, rated 110°C- Locking rotor design for maximum lamp retention- Snaps into two holes in panel for fast and easy mounting - Quick connect push-in wire terminals for 18 AWG solid wire 5⁄16”
- Two wire ports per terminal for easy harness wiring- For 0.23” - 0.040” (0.6 mm - 1.0 mm) panel thickness- Wires from bottom of lampholder- Rated 660W, 600V, suitable for all new HO lamps- cCSAus Certified / cULus Listed
27.8 [1.094]30.4 [1.197]
24.2 [0.953]
15.2 [0.598] 27.3 [1.075]
10.3 [0.406]
PANEL CUTOUT
(26mm +/- 0.1mm)
(4.6mm +/- 0.1mm)
* Add “-S” after product code for internal shunted version ∆ Add “-C” after product code for captive nut on models with nut slot
FL207* ∆ Solid Shoulder, Slot Mount 18 or 20 ga. Panel, Nut Slot
FL207X* ∆ Flush Sides, Slot Mount 18 ga. Panel
FL207-W* ∆ Flexible Wing, Snap in or Screw Mount, 18 ga. Panel
1.20
[0.0
5]
1.10 [0.04]
27.6
0 [1
.09]
9.50
[0.3
7]
9.00 [0.35]
49.8
0 [1
.96]
31.70 [1.25]
18.0
0 [0
.71]
1.10 [0.04]
27.6
0 [1
.09]
9.00 [0.35]
9.50
[0.3
7]
49.8
0 [1
.96]
31.70 [1.25]
18.0
0 [0
.71]
0.40
[0.0
2]
1.10 [0.04]
27.6
0 [1
.09]
9.50
[0.3
7]
9.00 [0.35]
49.8
0 [1
.96]
31.70 [1.25]
18.0
0 [0
.71]
T-8T-12
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
®
C US C US®
D1
LINEAR
FLUO
RESC
ENT
LAMPH
OLD
ERS
E21
LINEAR FLUORESCENT LAMPHOLDERS
FLUORESCENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T8 / T12 LAMPS
F500B 9” Leads with Mounting Holes FL500-W1 9” Leads in White
16.20 [0.638]11.20 [0.441]9.53 [0.375]
31.75 [1.250]
24.60 [0.969]
5.60
[0.2
20]
30.9
6 [1
.219
]13
.50
[0.5
31]
T-8
T-12 G13
FL500 SERIES T-8 / T-12 Butt-on Type- Made from Black Phenolic or White thermosetting plastic- Available with snap-in springs- Plain hole or tapped hole- Supplied with 9” TEW 105°C wire leads- Lead can be brought out either straight down or through hole in rear - FL-500 - White, Turn Lock 9” TEW Leads- FL-500B-1 - Black with 9” TEW Leads with Brackets
- FL-500B - Black with 9” Leads 0.140” MTG Holes - FL-500W-1 - White with 9” TEW Leads and Bracket- Rated 660W, 600V- cCSAus Certified / cULus Listed
FL500B-10.156" DIA(3.96)
0.875"(22.2)
1.010"(25.7)
0.328"(8.33)
PANEL CUTOUT
11.20 [0.441]9.53 [0.375]
5.60
[0.2
20]
2 x 0.125" dia holes
31.75 [1.250]
24.60 [0.969]
30.9
6 [1
.219
]
13.5
0 [0
.531
]
FL709-W Fixed End Lampholder, Tall Profile, Bi-Pin
- Made from Polycarbonate- For 60W - 112W lamps- Flexible snap-in wings for quick, easy insertion into panel- Snap-in/Slot-in mount, available with captive nuts for screw mount- Quick connect push-in wire terminals
accept 18 AWG solid or solder dipped leads, stripped 3⁄8”- Horizontal Bi-Pin Contact - Two wire ports per terminal to speed harness wiring- Rated 660W, 600V on Fixed End- cCSAus Certified / cULus Listed
1.17
" (29
.8)
1.31" (33.3)
18-2
2 ga
1.13" (28.6)
2.05
" (52
.0)
1.50" (38.1)
0.31
" (8.
0)
1.13" (28.6)
1.74
" (44
.1)
Open Slot Snap In
1.343"(34.11)
1.130"(28.7)
1.130"(28.7) 1.130"
1.130"
PANEL CUTOUT
T-12 G13
T-8
T-8T-12
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
®
C US C US®
D1
LINEAR
FLUO
RESC
ENT
LAMPH
OLD
ERS
E22
LINEAR FLUORESCENT AND TURRET LAMPHOLDERS
FLUORESCENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T8 / T12 LAMPS
FL710-W Plunger End Lampholder, Tall Profile, Bi-Pin
- Made from Polycarbonate- For 60W - 112W lamps- Flexible snap-in wings for quick, easy insertion into panel- Snap-in/Slot-in mount, available with captive nuts for screw mount- Quick connect push-in wire terminals
accept 18 AWG solid or solder dipped leads, stripped 3⁄8”- Horizontal Bi-Pin Contact - Two wire ports per terminal to speed harness wiring- Rated 660W, 600V on Spring End- cCSAus Certified / cULus Listed
1.17
" (29
.8)
1.31" (33.3)
18-2
2 ga
1.13" (28.6)
2.05
" (52
.0)
1.50" (38.1)
0.31
" (8.
0)
1.13" (28.6)
1.74
" (44
.1)
0.56" (14.3)
ø 0.
83" (
ø 21
.0)
Open Slot Snap In
1.343"(34.11)
1.130"(28.7)
1.130"(28.7) 1.130"
1.130"
PANEL CUTOUT
1.17
" (29
.8)
1.31" (33.3)
18-2
2 ga
1.13" (28.6)
2.05
" (52
.0)
1.50" (38.1)
0.31
" (8.
0)
1.13" (28.6)
1.74
" (44
.1)
0.56" (14.3)
ø 0.
83" (
ø 21
.0)
Open Slot Snap In
1.343"(34.11)
1.130"(28.7)
1.130"(28.7) 1.130"
1.130"
PANEL CUTOUT
G13T-12
T-8
FL518 T8 / T12 Bi-Pin Plunger End / FL518-S T8 / T12 Bi-Pin Plunger End Shunted FL519 T8 / T12 Bi-Pin Fixed End / FL519-S T8 / T12 Bi-Pin Fixed End Shunted
- These updated lampholders are made polycarbonate- Ideal for retail, commercial, signage and industrial applications- Keyway provides proper orientation and secures lampholder- Quickwire terminals accept 18 AWG solid or bonded copper wire, strip- For panel thicknesses from 0.035” to 0.050” ( .9mm to 1.3mm )
- Easily snaps into panel for quick assembly- Wires from the back of the lampholder- Two wire ports per terminal- Rated 660W 600V- c UL us, c CSA us listed - s” versions are internally shunted for instant start ballast applications
21.80 [0.86]
ÿ41.
60 [1
.64]
24ϒ„
6.15
[0.2
4]
ÿ32.00 [ÿ1.26]
10.0
0 [0
.39]
ÿ35.00 [ÿ1.38]
ÿ35.
00 [1
.38]
ÿ16.60 [ÿ0.65]
ÿ21.10 [ÿ0.83]
ÿ41.60 [ÿ1.64]
10.70 [0.42]
2.00 [0.08]
R0.80 [R0.03]
ÿ41.
60 [1
.64]
R0.80 [R0.03]
2.00 [0.08]
ÿ21.
00 [0
.83]
R1.00 [R0.04]
1.80 [0.07]16.30 [0.64]
15.00 [0.59]
1.80 [0.07]
R1.00 [R0.04]
ÿ21.
00 [0
.83]
0.80 [0.03]
ÿ3.10 [ÿ0.12] TYP.2
ÿ4.00 [ÿ0.16]ÿ8.70 [ÿ0.34]
8.00
[0.3
1]
11.00 [0.43]
8.00
[0.3
1]
ÿ35.
00 [1
.38]
45ϒ„
ÿ38.61 [ÿ1.52]
ÿ40.64 [ÿ1.60]4.76 [0.19]
panel cut out
21.80 [0.86]
ÿ41.
60 [1
.64]
24ϒ„
6.15
[0.2
4]
ÿ32.00 [ÿ1.26]
10.0
0 [0
.39]
ÿ35.00 [ÿ1.38]
ÿ35.
00 [1
.38]
ÿ16.60 [ÿ0.65]
ÿ21.10 [ÿ0.83]
ÿ41.60 [ÿ1.64]
10.70 [0.42]
2.00 [0.08]
R0.80 [R0.03]
ÿ41.
60 [1
.64]
R0.80 [R0.03]
2.00 [0.08]
ÿ21.
00 [0
.83]
R1.00 [R0.04]
1.80 [0.07]16.30 [0.64]
15.00 [0.59]
1.80 [0.07]
R1.00 [R0.04]
ÿ21.
00 [0
.83]
0.80 [0.03]
ÿ3.10 [ÿ0.12] TYP.2
ÿ4.00 [ÿ0.16]ÿ8.70 [ÿ0.34]
8.00
[0.3
1]
11.00 [0.43]
8.00
[0.3
1]
ÿ35.
00 [1
.38]
45ϒ„
ÿ38.61 [ÿ1.52]
ÿ40.64 [ÿ1.60]4.76 [0.19]
panel cut out
T-8
T-12 G13
T-8T-12
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
FL519 FL518
TURRET LAMPHOLDERS
®
C USC US®
D1
LINEAR
FLUO
RESC
ENT
LAMPH
OLD
ERS
E23
LINEAR FLUORESCENT ACCESSORIES
FLUORESCENT LAMPHOLDERS MEDIUM BI-PIN G13 FOR T8 SPACING / T5 LAMPS
FLT8/T5-FH
FLT8/T5-FH-BSI (BOTTOM SNAP IN)
FLT8/T5-FH-FW (FRONT WIRES)
FLT8/T5-PH
FLT8/T5-PH-BSI (BOTTOM SNAP IN)
FLT8/T5-PH-FW (FRONT WIRES)
1.20" (30.50)
0.75
" (19
.00)
0.86" (21.80)
0.87
" (22
.20)
1.25
" (31
.70)
1.41
" (35
.80)
0.16
4" (4
.17)
0.093" (2.35)0.158" (4.00)
0.48" (12.21)
1.00
" (25
.43)
0.71" (18.04)
1.20" (30.50)
0.83
" (21
.10)
1.41
" (35
.70)
0.72" (18.30)
0.61" (15.60)
0.90
" (22
.80)
1.00" (25.40)
1.31" (33.40)
TRAVEL DISTANCE
31.7
5 [1
.25]
1.10 [0.04] 34.7
5 [1
.37]
25.40 [1.00]20.25 [0.80]
28.95 [1.14]
17.05 [0.67]
12.20 [0.48]
19.00 [0.75]
4.30 [0.17]
8.70 [0.34]
1.50" (38.15)
0.75
" (19
.00)
1.15" (29.30)
0.87
" (22
.20)
1.25
" (31
.70)
1.41
" (35
.80)
0.16
4" (4
.17)
0.093" (2.35)0.158" (4.00)
0.48" (12.21)
1.00
" (25
.43)
0.71" (18.04) 0.31" (7.90)0.
83" (
21.1
0)
1.41
" (35
.70)
0.61" (15.60)
0.90
" (22
.80)
1.00" (25.40)
1.31" (33.40)
1.50" (38.15)
1.02" (25.95)
TRAVEL DISTANCE
31.7
5 [1
.25]
7.90 [0.31]
1.10 [0.04]
34.7
5 [1
.37]
25.40 [1.00]20.25 [0.80]
28.95 [1.14]
36.85 [1.45]
17.05 [0.67]
12.20 [0.48]
19.00 [0.75]
4.30 [0.17]
8.70 [0.34]
* Add “-S” after product code for internal shunted version
G5
FLT8 / T5 SERIES T8 to T5 Offset Socket - to go from T8 spacing and use a T5 Lamp
- Made from Polycarbonate, rated 110ºC- Phosphor Bronze contacts- Maintains lamp axis from T8 to T5 on low slot- Has fixed and plunger end to allow for lamp length tolerances - Rotary lock lampholders assure lamps do not come out until returned to unlocked position- Quick contact push in wire terminals for 18 AWG solid or bonded copper wire, stripped 7/16”
- Ideal in applications where hard tooling new socket plates would be expensive or the quantity required would not be justified- Ideal for relamping existing fixtures in ceilings using the existing socket bars- Two wire ports per terminal- Rated 660W, 600V - UL listed, CSA approved- Patent pending - Samples are available to try in your applications, please contact our office * Note: May not fit in all applications; covers may require notched area to fit.
FLT8/T5-FH: Fixed End FLT8/T5-PH: Plunger End
1.00" (25.5)
0.36
" (9.
15)
PANEL CUTOUT
T8 Lamp Length - 47.125"
T5 Lamp Length - 45.186"
0.311" (7.90)0.882" (22.40)
20# Gauge - 0.04" (1.10)
20# Gauge - 0.04" (1.10)
FH/PHFH/PH FW
T-8T-12
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
®
C US C US®
D1
CIR
CLIN
E FLUO
RESC
ENT
LAMPH
OLD
ERS
®
C US C US®
E24
FLUORESCENT CIRCLINE SOCKET LAMPHOLDERS
FLG10Q-FE G10Q Socket with 2 Mounting Ears
FLUORESCENT CIRCLINE SOCKETS
- White thermoplastic body- Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin or solder dipped wire, stripped 7⁄16”- Twin wireways for easy harness wiring.- Wires from bottom of lampholder
- Quick connect push-in wire terminals for 18 AWG solid, Twist & Tin, or solder dipped wire, stripped 5⁄16”- Socket has 2 mounting ears to screw down to panel- Rated 120W, 600V - UL Listed & CSA Certified
0.63 (16.0)
1.05 (26.7)
1.64(41.7)
0.20 (5.1)
0.130 (3.3) THRU0.22 (5.6) C-BORE0.08 (2.0) DEEP
0.50 (12.7)0.38 (9.7)
1.25(31.8)
T-9 G10Q
FLG10Q-FL G10Q Floating Socket / FLG10Q-9TEWN with 9” TEWN Leads
- White thermoplastic body- Floating version of socket- FLG10Q-FL has push-in wire terminals for 18 AWG solid wire, stripped 7⁄16”
- FLG10Q-9T has 9” TEWN 18 AWG leads attached (2 Blue, 2 Yellow), stripped 1⁄2”- Rated 120W, 600V- UL Listed & CSA Certified
0.63 (16.0)
1.05 (26.7)
0.52(13.2)
0.20 (5.1)
0.31*(7.9)
0.50 (12.7)
0.25* (6.35)
T-9 G10Q
T-9
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
D1
LINEAR
FLUO
RESC
ENT
ACC
ESSOR
IES
E25
LINEAR FLUORESCENT LAMPHOLDER ACCESSORIES
FLUORESCENT STARTER BASES
FSB-001 Tall Snap-in Bracket. FSB-002 Screw Mount (2) 0.138 Holes
FSB-004 Tall Bracket (2) #6/32 Tapped HolesFSB-003 Screw Mount (2) #6/32 Trapped Holes
FSB-006A Screw Mount (2) #6/32 Trapped Holes
22.0
[0.86
6]
24.5 [0.965]
Ø 3.5 [Ø 0.138]
31.5 [1.240]
34.3
[1.35
0]
11.0
[0.43
3]
30.6 [1.204]
22.0
[0.86
6]
#6-32 TAP
24.5 [0.965]
31.5 [1.240]
11.0
[0.43
3]
22.0
[0.86
6]
#6-32 TAP
24.5 [0.965]
31.5 [1.240]
11.0
[0.43
3]
22.0
[0.86
6]
24.5 [0.965]
Ø 3.5 [Ø 0.138]
31.5 [1.240]
11.0
[0.43
3]
36.5 [1.437]
22.0
[0.86
6]
8.0 [0
.315]
46.5 [1.831]
#6-32 TAP
31.5 [1.240]
11.0
[0.43
3]
33.5
[1.31
9]
25.3 [0.996]
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
FSB SERIES Starter Bases
- Made from high heat polycarbonate- Many mounting methods available- High strength Brass alloy contacts- Quick connect push-in wire terminals accept 18 AWG solid or over tinned leads, stripped 1⁄2”
- White colour is standard; Black is available upon request, with minimums- Starter holders may be ordered with leads attached, subject to minimums- Rated 660W, 600V- cCSAus Certified / cULus Listed
®
C US C US®
D1
LINEAR
FLUO
RESC
ENT
ACC
ESSOR
IES
E26
LINEAR FLUORESCENT LAMPHOLDER ACCESSORIES
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
FS SERIES Starters
- These quality long life starters are used to ignite fluorescent lamps- Available in plastic or metal can- UL Listed & CSA Approved
METAL CASE PLASTIC CASE FOR USE WITH
FS-2M FS-2 14, 15, 20W Linear Lamps
FS-4M FS-4 30, 40W Linear Lamps
FS-5M FS-5 4, 5, 6, 8W Linear Lamps
FS-12M FS-12 32W Circline Lamps
FS-25M FS-25 22, 25W Circline Lamps
35.6 1.40
12.5
21.0 .83
.49
.94
1.26
24.0
32.0 PANEL CUTOUT
1.2632.0
FSB-268 Starter Base, Top / Bottom Snap-in- Made from high strength polycarbonate- Can be mounted either above or below surface- Snaps into two holes in panel for quick assembly- For 0.023” - 0.047” (0.6 mm - 1.2 mm) panel thickness
- Quick connect push-in wire terminals accept 18 AWG solid or pre-tinned leads, stripped 3⁄8”- Rated 660W, 600V- cCSAus Certified / cULus Listed
FLUORESCENT STARTERS, STARTER BASES AND ACCESSORIES
D1
LINEAR
FLUO
RESC
ENT
ACC
ESSOR
IES
E27
LINEAR FLUORESCENT LAMPHOLDER ACCESSORIES
T-8
T-12
- Screw Mount Clip for T8 Lamp- Made of UV stabilized clear polycarbonate- Mounts into 0.157” (4 mm) hole*For clip with captive nut, replace suffix ‘-SC’ with ‘-CN’
LCP-T8-LP-SC / LCP-T12-LP-SC Plastic Screw-in Support Clip
0.157" (4.0)
MOUNTING HOLE
FLUORESCENT LAMP CLIPS
LCM-T5-LP-SI LCM-T8-LP-SI LCM-T12-LP-SI
0.49
" (12
.5)
0.71
" (18
.0)
1.0"
(25.
5)
T-8
T-12
- Snap-In Clip for T5/T8/T12 Lamp- Made of nickel-plated steel- Mounts into 0.315” (8 mm) hole
LCM-T5-LP-SI / LCM-T8-LP-SI / LCM-T12-LP-SI Metal Snap-in Support Clip
T-5
LCM-T5-LP-SI LCM-T8-LP-SI LCM-T12-LP-SI
0.351"
MOUNTING
HOLE
T-8
T-12
- Screw Mount Clip for T5/T8/T12 Lamp- Made of nickel-plated steel- Mounts into 0.157” (4 mm) hole*For clip with captive nut, replace suffix ‘-SC’ with ‘-SN’
LCM-T5-LP-SC / LCM-T8-LP-SC / LCM-T12-LP-SC Metal Screw-in Support Clip
T-5
0.157" (4.0)
MOUNTING HOLE
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
LCM-T12-LP-SC LCM-T8-LP-SC LCM-T5-LP-SC
16.5
25.5 12
.5
LCM-T12-LP-SC LCM-T8-LP-SC LCM-T5-LP-SC
16.5
25.5 12
.5
LCM-T12-LP-SCLCM-T8-LP-SCLCM-T12-LP-SC LCM-T8-LP-SC LCM-T5-LP-SC
16.5
25.5 12
.5
LCM-T5-LP-SC
LCP-T12-LP-SCLCP-T8-LP-SC
0.14
21.19
25.0
0
0.14
LCP-T12-LP-SC LCP-T8-LP-SC
15.89
20.0
0
0.14
21.19
25.0
0
0.14
LCP-T12-LP-SC LCP-T8-LP-SC
15.89
20.0
0
E28
LINEAR
FLUO
RESC
ENT
LAMPH
OLD
ERS
LINEAR FLUORESCENT LAMPHOLDER ACCESSORIES
FLUORESCENT STARTERS, STARTER BASES AND ACCESSORIES
T-8
T-12
- Made from White heat resistant Polypropylene- Prevents lamps from shattering in fixtures by locking out pins
- Simply slides on to most industry T8/T12 lampholders- For high vibration applications
TL-1 Tube Locks
FOR MORE INFORMATION PLEASE CALL 1-800-661-9610 (HEAD OFFICE) 1-888-762-5384 (USA)
PLEASE CONSULT THE FACTORY FOR MORE PRODUCTS AND CUSTOMIZATION.PRODUCT DETAILS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.