LAMONT HOME - secure.img.wfcdn.com · crib sheet or cover unless it ˛ts securely on crib mattress....

Style #906 Lot or Model #: Date of Purchase:

(to be completed by consumer) REV. #1 (2012)

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETYINFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

ADULT ASSEMBLY IS REQUIRED.• TOOLS NEEDED ←

A FLAT OR PHILLIPS HEAD SCREWDRIVER AND ANADJUSTABLE WRENCH, 7/16 INCH WRENCH OR A PAIR OF PLIERS.

LAMONT HOMEBassinet Assembly Instructions

Lamont Home Customer Service Department800-553-5621 (8:00 am — 4:30 pm CST, M-F)

Bassinet Made in the USALiners and Pad Made in China


800-553-5621 • www.lamontlimited.compage 2

CONGRATULATIONS!

Congratulations on your purchase of the LaMont Home Bassinet. We appreciate your business, and recognize our obligation to earn your con�dence. �is product was designed, developed and produced with infant safety as the #1 priority.

You are about to place the most valuable gi� of love that will ever enter your life into this bassinet. Before you do so, we strongly encourage you to carefully read all warnings and instructions found on all product labels and these assembly instructions. Much of what can be found in this manual has to do with common sense, but make no mistake; infant safety expands far beyond “common sense”, especially for new parents. �is manual will help to inform you of potential hazards recognized by the juvenile product industry, but there is no substitute for personalized instruction from your baby’s licensed pediatrician. Serious, and even fatal accidents can happen, so please do not use this product before you are completely aware of, and fully understand all of the potential risks and hazards that exist.

�ere is also no substitute for adult supervision and vigilance. Special care must be taken when choosing a location for this bassinet within your home. Under no circumstances should this bassinet be placed near a heat source (electric, gas or other) where such heat source could start a �re, or overheat your baby. �is bassinet should also be located where you can hear your child, and continually monitor your baby’s safety. Your baby is helpless and is not only dependent upon you for love and attention, but also your good judgment and safety consideration.

Again, thank you for your con�dence, and for your patronage. We wish you the best as you vigilantly watch over this treasure of a lifetime – your child.

800-553-5621 • www.lamontlimited.com


page 3

WE ARE HERE TO HELP!

We do our best to ensure that your bassinet arrives in excellent condition.

In the event that a part is damaged or missing,Lamont Home will be happy to provide you with replacement parts, at no

charge, within 90 days of purchase, providing the parts are available in our warehouse and the item purchased is part of our current inventory.

In order to receive missing or damaged parts, at no charge, you must provide proof of purchase within 90 days.

If you need assistance with assembly or to order replacement parts,please call our Customer Service Associates, prior to returning the

item to the store.

Lamont Home Customer Service Department800-553-5621

Monday-Friday, 8:00 am — 4:30 pm CST

For instructional video on how to assemble this bassinet, go to our website:

www.lamontlimited.com and click on link

WARRANTY

�is product is guaranteed against defective materials andworkmanship for 90 days from the date of purchase.

If you need to return product, you must �rst contact ourLamont Home Customer Service Department.

You must have original sales receipt.

Failure to follow these warnings and instructions could result inserious injury or death.Please check for missing or damaged parts prior to assembly.Please launder liner and mattress cover prior to assembly.

• Read all instructions before assembling unit.• �is item requires assembly by an adult.• Keep Assembly Instructions for reference.• Do not use this unit if the instructions cannot be strictly followed.• Before usage or assembly, inspect unit for damaged hardware, loose joints, missing parts or sharp edges. NEVER use if there are any loose or missing fasteners, loose joints, broken parts, or torn mesh/fabric. If you experience any of these problems, please contact Lamont Home Customer Service at 800-553-5621 from 8am-4:30pm CST, M-F.• DO NOT substitute any parts.• Keep unassembled parts out of the reach of children.• �is product is for one time use only. DO NOT store for re-use or buy second hand.• FALL HAZARD – To help prevent falls, DO NOT use this product when the infant begins to push up on hands and knees or has reached manufacturer’s recommended maximum weight of 15 lbs., whichever comes �rst.• �is product is intended for a child who is 3 months old or less.• NEVER leave a baby unattended in a bassinet if there are other children or animals present.• NEVER allow children or pets to hang on the side of the bassinet or climb into or onto this product.• DO NOT use in a motor vehicle.• �is product is NOT intended to slide or rock.

800-553-5621 • www.lamontlimited.com

CONSUMER INFORMATION SAFETY WARNINGS!


page 4

• DO NOT move or carry the bassinet with the infant inside of it.• DO NOT use bassinet on a table or other elevated surface.• SUFFOCATION HAZARD: Infants can su�ocate: • In gaps between an extra pad and side of the bassinet. • On so� bedding.• NEVER add a mattress, pillow, comforter or padding. Use ONLY the pad provided by the manufacturer.

• If a sheet is used with the pad, use only the one provided by the manufacturer or one speci�cally designed to �t the dimensions of the bassinet.

• WARNING - Prevent possible strangulation or entanglement. NEVER use crib sheet or cover unless it �ts securely on crib mattress. • ONLY use a mattress that is long and wide enough so the gap between the mattress and the two sides forming one corner of the bassinet is NO MORE THAN 25 mm (1 inch) when the mattress is pushed into the opposite corner of the bassinet.• NEVER use plastic shipping bags or other plastic �lm as a mattress cover not sold and intended for that purpose as this may cause su�ocation.• Strings can cause strangulation! DO NOT suspend strings over a product or attach strings to toys. DO NOT place items with a string around a child’s neck, such as canopy strings or paci�er cords. • DO NOT place bassinet near a window where cords from blinds or drapes may strangle a child. Child may also fall out of window.• DO NOT place cords, straps or similar items that could become wound around a child’s neck in or near the bassinet.• DO NOT place bassinet near a radiator, stove or other heat or ignition source that could cause overheating of child or may ignite bassinet/bedding.• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their back to sleep unless otherwise advised by your physician.• Use bassinet with only one child in it at a time.

CONSUMER INFORMATION(continued)

SAFETY WARNINGS!


page 5800-553-5621 • www.lamontlimited.com

STEP #1 PARTS IDENTIFICATION• Important - Please remove all parts from the package and identify them prior to beginning assembly.• Tools Needed - Flat or Phillips head screwdriver and an adjustable wrench, 7/16 inch wrench or a pair of pliers.

Bassinet Body1 ea.

Canopy Frame1 ea.

Leg2 ea.

Curved Floor Rail2 ea.

Straight Rail2 ea.


Liner Setincludes mattress �tted cover,

bassinet liner and canopy cover.May also contain optional ribbon

belts and bows.



Mattress Pad1 ea.

Shelf Board1 ea.


1-1/4 inch Screw - 4 ea.

3/4 inch Screw - 4 ea.

1/4 inch Nut - 8 ea.

2-3/4 inch Screw - 4 ea.

Shown actual size

STEP #2 ATTACH LEGS TO BASSINET BODY


1) Turn bassinet body upside down.

2) Pick up and position the leg with the two oval leg sockets facing the center of the bassinet body.

3) Push hole tabs on the leg over the hole tab on the bassinet body bottom.

4) Place 1-1/4 inch screw through the hole tabs of the leg and the bassinet bottom. Place a nut onto the screw and tighten until snug.

5) Repeat the screw and nut process to the other side of the leg.

6) Repeat the entire process with the 2nd leg.

7) Check to con�rm all screws and nuts are snug tight.

800-553-5621 • www.lamontlimited.compage 8 Shown actual size

STEP #3 ATTACH STRAIGHT RAILS


1) �e bassinet body is upside down.

2) Attention! Please follow the details of this step very closely.

3) Pick up the straight rail and align the teardrop shaped end with the leg socket. �e top of the straight rail should be �at like the letter “T”. If it is not, turn the rail end to end and align the teardrop shaped end on the straight rail with the leg socket. Be sure to attach rails correctly.

4) Insert the teardrop shaped end of the straight rail into the leg socket, insert 3/4 inch screw through the leg and straight rail, place a nut onto screw and tighten until snug.

5) Repeat the screw and nut process to the other side of the straight rail.

6) Repeat entire process with the 2nd straight rail.

7) Check to con�rm all screws and nuts are snug tight.


leg socket

teardropshaped end

�at side up

Shown actual size


1) Turn bassinet body right side up.

2) Place the shelf board between the straight rails and the legs.

3) Gently push downward on the shelf until the shelf is seated on the ledges of the straight rails and the legs.

STEP #4 ATTACH SHELF


leg ledge

straight rail ledge

STEP #5 ATTACH CURVED FLOOR RAILS


1) Lay the curved �oor rails along both sides of the bassinet so that the rails curve in towards the center of the bassinet body.

2) Put each foot of the legs into the slots on the top of both curved �oor rails.

3) Place a 2-3/4 inch screw through the hole in the leg and into the hole in the top of the curved rail and tighten until snug.

4) Repeat the screw attachment process three (3) more times.

5) Check to con�rm all screws are snug tight.


Shown actual size

STEP #6 INSTALL BASSINET BODY LINERLamont HomeTM recommends laundering �rst, per care instructions.


1) Identify the liner set bag and remove the largest piece, the bassinet liner.

2) Find the two —1 inch slits in the bassinet liner, position the liner as shown in the diagram, using the round molded buttons on the bassinet top frame, and the two warning labels sewn onto the liner.

3) Place each liner slit around each of the molded buttons on the top of the bassinet body.

4) Work the liner around the body so that all of the ru�es are on the outside of the bassinet body.

molded buttons


foot of bassinet


STEP #7 INSTALL MATTRESS COVERLamont HomeTM recommends laundering �rst, per care instructions.

1) Remove mattress �tted cover from liner set bag.

2) Place the mattress cover onto the mattress pad just like you would put a �tted sheet on a mattress.

3) Position it in the bottom of the bassinet body.

4) Ensure that it �ts snugly and securely.


STEP #8 ATTACH CANOPY COVER TO CANOPY FRAMELamont HomeTM recommends laundering �rst, per care instructions.

1) Identify the canopy frame and the canopy liner from the liner set (it is the only fabric piece le� that has ru�es).

2) Position the canopy frame and the canopy liner as shown in the 1st drawing. �e ru�ed edge of the canopy liner is in your le� hand and the latch side of the canopy frame is by your right hand.

3) Pull elastic loop of the canopy liner over ‘U’ shaped end of the canopy frame.

4) Work the canopy liner along both edges of the canopy frame as shown in the 2nd drawing.

5) Pull the second elastic loop of the canopy liner over ‘U’ shaped end of the bassinet canopy frame as shown in the 3rd drawing.

elastic strap

latch



STEP #9 ATTACH CANOPY ASSEMBLY TO BASSINET BODY

1) Position the ‘U’ shaped ends of the canopy frame with liner over the molded buttons on the top inside edge of the bassinet body.

2) Make sure that the latch on the canopy frame is between the molded buttons and the short end of the bassinet.

3) Push the ‘U’ shaped ends of the canopy frame onto the molded buttons and rotate the canopy frame down so the latch will grab the inside of the bassinet frame.

4) �e canopy will not rotate when properly latched.

latch



STEP #10 RIBBON BELT AND BOW INSTALLATION (May be required on some models)

1) Identify the ribbon belt and bow you would like to use from the liner set.

2) Belt loops are located around the top edge of the bassinet body. Find the belt loop opposite the canopy end and start the ribbon through the loop.

3) Pull the ribbon through the remaining belt loops around the top of the bassinet body. It is very important not to miss any loops.

4) Attach the two ends of the ribbon to each other by using the hook and loop fastener on each end of the ribbon, as shown in 1st drawing.

5) Attach the bow to the belt loop at the hook and loop fastener end where you started and stopped threading the ribbon, as shown in 2nd drawing.



LAMONT HOME - secure.img.wfcdn.com · crib sheet or cover unless it ˛ts securely on crib mattress....

Documents

Transcript of LAMONT HOME - secure.img.wfcdn.com · crib sheet or cover unless it ˛ts securely on crib mattress....