LaBour - TFA Triple Volute Pump. The “Q” Classic Triple Volute Pump.
-
Upload
magdalen-golden -
Category
Documents
-
view
250 -
download
3
Transcript of LaBour - TFA Triple Volute Pump. The “Q” Classic Triple Volute Pump.
LaBour - TFA
Triple Volute PumpTriple Volute Pump
The “Q” Classic Triple Volute Pump
TFA Design
Capacities: 1100 GPM (250 m3/hr)
Head (max): 625 Ft (190 m)
Temperature (max): 500°F (245°C)
Materials: 316SS, CD4MCU, Alloy 20, Hast, Monel, Ni., & Ti
Lip Seals Standard Lip Seals Standard (Optional Lab. Seals)(Optional Lab. Seals)
Optional 316SS BearingOptional 316SS BearingFrame & AdapterFrame & Adapter
(Corrosion or Temperature)(Corrosion or Temperature)
External ImpellerExternal Impelleradjustment using jack boltsadjustment using jack bolts
AND shimsAND shims
Duplex AngularDuplex AngularThrust BearingThrust Bearing
Heavy Duty 316SS Heavy Duty 316SS or higher Alloy Shaftor higher Alloy Shaft
Features & Benefits -TFA Power End
Features & Benefits - TFA Liquid End150# F.F Flanges150# F.F Flanges
(optional 300 # FF/RF(optional 300 # FF/RF
Optional Casing &Optional Casing &Stuffing Box Cooling & HeatingStuffing Box Cooling & Heating
Heavy Duty Heavy Duty TRIPLE volute CasingTRIPLE volute Casing
Features & BenefitsStuffing Box Options (with or without Spiral Trac)
Standard Bore
Big Bore Taper Bore
Features & Benefits - ANSI Base Plates
Cast Iron Fabricated SteelNewNew
Competition
• Vortex type pumpsVortex type pumps• Side Channel type pumpsSide Channel type pumps
Manufacture LaBour Peerless Goulds Duriron/FlowserveModel TFA 8196 3196 Mark III
# of Sizes 8 23 28 30Service Range 1100 GPM 625 Ft 4500 GPM 730 Ft 4500 GPM 730 Ft 7400 GPM 985 Ft
Temperature (Deg F) -50 to 500 -50 to 500 -50 to 500 -50 to 500
Material OptionsDI, 316SS, A-48, 20SS, R-55 Hast., Monel, Ni, Zr, Ti
DI, 316SS, CD4, 20SS, Hast., Monel, Ni, Ti
DI, 316SS, CD4, 20SS, Hast., Monel, Ni, Ti
DI, 316SS, CD4, 20SS, Hast.,
Monel, Ni, Zr, TiTriple Volute Option Yes No No No
Thrust Bearing Duplex Double Row Double Row Double Row
Competition Comparison
Typical Applications
• Entrained air/vaporsEntrained air/vapors– Released by mixing chemicalsReleased by mixing chemicals– Food processing Food processing – Dissolved Air FlotationDissolved Air Flotation– EvaporatorsEvaporators
• Low flow or varying flowLow flow or varying flow– one pump serving 2 linesone pump serving 2 lines– seasonal demand changesseasonal demand changes
• Shear sensitive FluidsShear sensitive Fluids
TFA with Dual Conditions
Single Volute Radial Thrust Loads
Radial Thrust Load LaBour TFA
Inle
t pre
ssure
dro
p Air bubble size
12
3
4
5
TFA/LVA Impeller design
Extended inlet Extended inlet vanes and vanes and steep outlet steep outlet vanesvanes
ConventionConventionalal
vane designvane design
VACUUM EVAPORATOR
Entrained Air Application
Capacity Correction with flooded Capacity Correction with flooded suction:suction:
• approx.. direct ratio of the % approx.. direct ratio of the % entrained air.entrained air.
Capacity Correction w/ 20 ft suction Capacity Correction w/ 20 ft suction lift:lift:
• approx. 2.5 times % entrained air.approx. 2.5 times % entrained air.
Entrained Air Application
TDH Correction:TDH Correction:
As a rule of thumb, you can use the As a rule of thumb, you can use the entrained air percentage to the 2.5 entrained air percentage to the 2.5 power to correct the differential power to correct the differential head at the best efficiency point of head at the best efficiency point of the pump. The head loss will be the pump. The head loss will be more both at lower and higher more both at lower and higher flows. flows.
Lip Seals or Labyrinth seals
Customer sold on Customer sold on labyrinth……labyrinth……
• Sell him on the Sell him on the advantages of the advantages of the Impro bearing Impro bearing seals that last seals that last forever.forever.
• Your after market Your after market sales…….$0.00sales…….$0.00
Other customers Other customers (LaBour majority)(LaBour majority)
• Sell him on using only Sell him on using only LaBour “CR Wave” LaBour “CR Wave” type lip seals, instead type lip seals, instead of the “cheap” lip of the “cheap” lip seals purchased from seals purchased from bearing housesbearing houses
• Your aftermarket Your aftermarket sales $ 50.00+ sales $ 50.00+ pp/yearpp/year
Buy a $5 Lip Seal and Risk a $500 shaft
Triple Throat Concept Devleoped in 1966 Leader in Technology.
Questions? Opportunities?Questions? Opportunities?