ISO 9001:2008 CE. Address :

LABPRO INTERNATIONAL HEAD OFFICE

48-A KUNJ VIHAR BEHIND B.D. FLOOR MILL

AMBALA CANTT-133001(HARYANA)

CONTACT NO.

PHONE NO . 0171-2690847 FAX NO. 0171-2690847

MOBILE

9034101997

CONTACT PERSON ( PRODUCTS MANAGER )

KAMAL SAINI

LABPRO – B.O.D Incubator

BOD incubators often called low temperature incubators are one of most important lab equipment in many research centers, hospitals and

other pharmaceutical labs. BOD Incubators by LABPRO are known as exceptional lab incubators specially designed for a variety of

incubation and testing applications. The series of BOD incubators is perfect for BOD testing and other related jobs of research. Designed to

meet customized requirements of different customers, LABPRO as an experienced BOD incubator manufacturer in India, produces

standard as well as customized BOD incubator models. These BOD Incubators come in various sizes and capacities such from 36 liters to

1000 liters.

Our Cooled Incubators are ideal for BOD incubation testing or for crystallography. As B.O.D Incubators our incubator units are designed

to meet APHA specifications for Biochemical Oxygen Demand (B.O.D) and also equipped with mechanical convection system to ensuring

even air distribution,overload protection system, digital temperature controller and safety high & low limit controls….More

Inner Chamber Capacity Capacity Al S.S

Size in mm (W x D x H) In Cu. Ft. (Aprrox) Chamber Chamber

a) 455x410x610 4 Cu. Ft. 112 Ltrs.

b) 505x415x830 6 Cu.Ft. 171 Ltrs.

c) 565x565x865 10 Cu.Ft. 280 Ltrs.

d) 650x580x900 12 Cu.Ft. 336 Ltrs.

e) 700x650x900 15 Cu.Ft. 420 Ltrs.

1. Factory Address

LABPRO INTERNATIONAL

Shop no. 23 gaushala before b.d. floor

mill

Ambala cantt-133001

MOB. 9034101997 (KAMAL SAINI)

Manger ( Mahinder saini)

2.Factory Address

LABPRO INTERNATIONAL

48- kunj vihar behind b.d.

floor mill

Ambala cantt -133001 (

Haryana)

MOB. 9034101997 (KAMAL

SAINI)

3.Factory Address

LABPRO INTERNATIONAL

Shop no. 89 gaushala before b.d. floor

mill

Ambala cantt-133001

SAINI)

Manger : (Amrjeet Saini)

info@labprostore.com

labprointernational@gmail.com

purchase@labprostore.com

labpro@india.com

www.labproworld.in

www.labprostore.com

www.labprointernational.com

www.labproambala.com

www.labprowarranty.com

Complete With:-

i) Digital Temp Indicator com controller

ii) Manual Volt meter + Amp. Meter + On- Off Switch

iii) Automatic Voltage Stabilizer (Optional Extra cost)

LABPRO – Mortuary Chambers

APPLICATIONS

‚LABPRO‛ brings the high-tech double walled microprocessor controlled, solid-state cooling Mortuary Chamber.

Specially designed for storing cadaverous under cool condition to prevent decomposition. These are latest

development in Mortuary technology offering space saving advantage over the conventional type together with

greater hygiene.

Highly recommended & Useful for Hospitals, Railway, Airports, Defense…More

Capacity Temp. Temp. Voltage Outer M.S. Outer S.S.

Control Stabilizer Inner S.S. Inner S.S.

a) Single Body 2 °C to 5°C -15° C to 20°C 2 KVA

b) Two Body 2°C to 5°C -15° C to 20°C 3 KVA

c) Three Body 2°C to 5°C -15 °C to 20°C 4 KVA

d) Four Body 2°C to 5°C -15° C to 20°C 5 KVA

e) Six Body 2°C to 5°C -15 °C to 20°C 8 KVA

LABPRO – Blood Bank Refrigerator

LABPRO Blood Bank chamber is a most versatile unit for Blood Bank mounted on a sturdy angle frame. The

inner chamber is made up of stainless steel sheet and outer of mild steel sheet duly powder coated paint.

Caster wheels provided for easily mobility. The temperature is maintained in 4° C to 6° C with forced air

circulation ensures uniform temperature, for storing blood bottles or blood bags. Temperature is controlled by

Microprocessor PID digital temperature controlled-cum-indicator and triggers the AUDIO VISUAL ALARM

in the event of fluctuation exceeding permitted tolerance. Unit is also fitted with DOOR OPERATED ALARM

and POWER SUPPLY FAILURE ALARM, as a safety devices.

A highly efficient refrigeration system consists of hermetically sealed compressor, for high performance

cooling coil runs all around the cabinet to maintain uniformity of temperature….More

Capacity Capacity Chamber Size Outer M.S. Outer S.S

Liters Of Bag. (W x D x H) Inner S.S Inner S.S

a) 128 Liters 60 Bags 18‛ x 20‛ x 22‛

b) 156 Liters 80 Bags 20‛ x 22‛ x 22‛

c) 228 Liters 120 Bags 20‛ x 22‛ x 32‛

d) 270 Liters 160 Bags 20‛ x 22‛ x 38‛

e) 338 Liters 200 Bags 25‛ x 22‛ x 38‛

Complete With:-

i). Chart Type Temp. Recorder

ii). Digital Temp. Controller, Digital Volt Meter & Digital Amp. Meter with wheel

iii) Automatic Voltage Stabilizer (Optional Extra cost)

LABPRO – Dehumidifier

De-Humidifier Capacities: 1.5 Tons (M.S Body) "(MAKE : LABPRO) " (Fitted with time controlled safety device in, case humidity controller fails, for

safety of the compressor) "(MAKE : LABPRO) " These are water condensing type, based on

‚Refrigeration Cycle‛ to avoid use of expensive chemicals required for desiccant type models. The unit

is self standing and is mounted on a study angle iron frame. Fitted with castor wheels. It removes

excess moisture from the atmosphere and Is fitted with hermetically sealed compressor. Heat

exchanger and water condensing coils are made of copper. Water collection tank is provided below the

unit is collect condensate water. Humidity is controlled by HUMIDITY CONTROLLER is corporate in

the unit, up to 30% ± 30% RH, depending upon the ambient conditions. To achieve very low humidity,

the room should have a independent window type air conditioner to much with the dehumidifier heat

load in the room. Suitable to work on 220/230volts A.C. supply. …More

Model A.C Type M.S Body S.S Body

a) A.C Type

b) Vertical Type Body

Optional (Extra Cost):- Automatic Voltage Stabilizer 4.0 KVA (Compulsory)

LABPRO – Lypholizer (freeze Dryer)

"(MAKE : LABPRO) " The Unit has hermetically sealed compressor to maintain temperature upto

minus 40OC. Temperature control by electronic digital cum indicator with electronic vacuum indicator.

It will have secondary chamber for 6 test & 12 test….More

Capacity

a). 3.25 Liters 6 Test

b). 5.25 Liters 12 Test

LABPRO – Seed Germinator (Single Chamber)

"(MAKE : LABPRO) " Temperature range 5°C to 50°C. Temperature controlled by Digital temperature

indicator cum controller in the variation of ±1°C. Chamber with 14 perforated trays. Chamber is

provided with stainless steel water reservoir at bottom. Humidity from 90 to 95% ±3% (Not adjustable)

double-walled inside made of anodized aluminum /stainless steel and outside Mild steel painted in

epoxy powder coating. To work on 220/230volts 50 cycles A.C. only….More

Chamber Size (Chamber & trays made of anodized aluminum)

W H D Capacity

i). 555 x 910 x 605 mm 308 Liters.

Chamber & trays made of highly polished stainless steel.

i). 555 x 910 x 605 mm 308 Liters.

Complete With:

i). Automatic 0-24 hour’s timer to regulate cyclic illumination conditions.

ii). Optional (Extra Cost):- Automatic Voltage Stabilizer (Compulsory)

LABPRO – Seed Germinator (Dual Chamber)

"(MAKE : LABPRO) " For cooling a sealed compressor unit has been provided below the chamber to

work independently.

Each Chamber size

555(W)x 910(H) x605(D)mm

a). Heating and cooling in separate chamber made of anodized aluminum

b). As in (a) but chamber made of stainless steel sheet.

c). Heating & cooling in both chambers & chambers made of anodized aluminum.

d). Heating & cooling in both chambers made of stainless steel sheet.

Complete With

i). Automatic 0-24 hour’s timer to regulate cyclic illumination conditions.

ii). Optional (Extra Cost):- Automatic Voltage Stabilizer 3 KVA (Compulsory ….More

LABPRO – Refrigerated Liquid Bath

Standard Construction, inner Chamber made out of stainless steel sheet with digital temp. Controller-

cum-indicator. Temperature can be controlled from range minus (-) 20°C to plus (+) 20°C….More

Chamber Sizes: Capacity(Approx.) Price/Each 450x300x300mm 42 Liters.

Complete With:-

i). Microprocessor PID digital temp. Indicator-cum-Controller.

LABPRO – Plant Growth Chamber (Small)

"(MAKE : LABPRO) " Inside made of stainless steel sheet. Outside mild steel sheet with finished in

white stoving enamel/powder coated paint with mat finished colour combinations. Fitted with cooling,

heating and lighting arrangements. Temperature range 5° C to 50°C± 1°C. Temperature can be obtained

from 15°C to 50°C ± 1C when all lights from two sides and top are ‘ON’. "(MAKE : LABPRO) "

Temperature is controlled by DUAL temperature electronic digital temperature controller-cum-

indicator to set two temperatures for day and night. Above Growth chamber is completer with

humidity control from 55% to 95% RH. Light intensity can be adjusted controller according to

requirement and humidity shall be controlled by humidistat. Complete with 0-24 hrs. Timer to work on

220/230 volts 50 cycles A.C. only….More

Size Capacity Capacity Al S.S

W H D in cu.ft Approx. Chamber Chamber

a) 570 x 875 x 550mm 10 cu.ft. 280 Ltrs.

b) 775 x 900 x 775mm 20 cu.ft. 560 Ltrs.

c) 825 x1200 x 825mm 30 cu.ft. 840 Ltrs.

d) 900 x1720 x 800mm 45.8 cu.ft. 1282 Ltrs.

OPTIONAL:-

i). Electronics Digital Indicator cum Humidity Controller and

Temperature Controller.

ii). Microprocessor PID digital temp. Indicator cum Controller.

iii). Automatic Voltage Stabilizer (Recommended). P.O.R.

LABPRO – Refrigerated Centrifuge Rectangular (Research)

"(MAKE : LABPRO) " 4000 to 5000 R.P.M. fitted with electronic solid state speed regulator top

cover made of transparent acrylic sheet cord & plug ….More

Capacity Price/Each

a) 4 x 15 ml Tubes (Digital Controller)

b) 6x 15 Tubes (Digital Controller)

c) 8x 15 ml Tubes (Digital Controller)

d) 12x 15ml Tubes (Digital Controller)

OPTIONAL:-

i). Automatic Timer Manual

ii). Automatic Timer Digital

iii). Speed Meter Manual

iv). Speed Meter Digital

AIR CONDITIONIERS, REFRIGERATIONS & COOLING PLANTS TEST RIG

LABPRO – Window Air Conditioner Test Rig

"(MAKE : LABPRO) " This unit consists of a hermetically sealed compressor with air cooled

condenser. A Capillary next to condensers followed by medium Temperature evaporators.

Electrical energy supplied to the compressor can be measured by energy meter and Rotameter.

High Low pressure Gauge Section Accumulator Electric Assembly, Relay, Start capacitor,

running capacitor, Digital Temperature Panel…..More

EXPERIMENTS:-

To calculate the COP of unit.

To calculate the refrigerating effect and HP of unit.

To determine the sensible heat factor of air.

Capacity Price/Each

i). 1 Ton

ii). 1.5 Ton

OPTIONAL:-

1.) Expansion Valves

LABPRO – Vapour Compression Air Conditioner Test Rig

"(MAKE : LABPRO) " This unit consists of a hermetically sealed compressor with air cooled

condenser. A capillary are next to condensers followed by medium temperature evaporators.

Electrical energy supplied to the compressor can be measured by energy meter & Calculate

COP through Rotameter and duct type air cooling. ….More

EXPERIMENTS:-

To calculate the COP of unit.

To calculate the refrigerating effect and HP of unit.

To determine the sensible heat factor of air.

Capacity Price/Each

i). 1 Ton

ii). 1.5 Ton OPTIONAL:-

1.) Expansion Valves

LABPRO – Component of Window & Vapour Compression Air Conditioner System

"(MAKE : LABPRO) " To study the Component of Window & Vapour Compression Air

Conditioner System. This system consist of Compressor, Heating Condenser, Cooling Coils,

Fan Motors, Blower, Section Gauge, Discharge Gauge, Hand shat valve, Accumulator,

Capillary Tube, Copper Filter, Rotameter, Selector switch, Thermostat Switch, Copper Tube

(Section Band, Discharge Band, Gas Charging Line) and MS Sheet. ….More

Capacity Price/Each

i). 1 Ton

ii). 1.5 Ton

LABPRO – Refrigeration Test Rig

"(MAKE : LABPRO) " This unit consists of a hermetically sealed compressor with air cooled condenser,

necessary measuring devices for temperature and pressure at different points and energy meter,

voltage stabilizer. A capillary are next to condensers followed by medium temperature

evaporators & calculate COP through Rota meter, ….More

EXPERIMENTS:-

To calculate the COP of unit.

Compressor Capacity Price/Each

i). ¼ HP

ii). ½ HP

LABPRO – Component of Refrigeration System

To study the Component of refrigeration System.

"(MAKE : LABPRO) " This system consist of Compressor, Heating Condenser, Cooling Coils,

Fan Motors, Blower, Section Gauge, Discharge Gauge, Hand shat valve, Accumulator,

Capillary Tube, Copper Filter, Rotameter, Selector switch, Thermostat Switch, Copper Tube

(Section Band, Discharge Band, Gas Charging Line) and MS Outer body and SS Inner body

fitted with MS Plate Sheet. ….More

Compressor Capacity Price/Each

i). ¼ HP

ii). ½ HP

LABPRO – Water Cooler Test Rig

Water Tank Capacity Price/Each

i). 100 Liters

LABPRO – Chiller Plant Test Rig

Water Tank Capacity Price/Each

i). 80 Liters

LABPRO – Ice Plant Test Rig

LABPRO – Mini Cold Storage Plant

Capacity Size Price/Each

i). 2 Ton 40‛ x 40‛

LABPRO – Water to Water Heat Pump (Mechanical Heat Pump)

LABPRO - Hot Air Universal Oven (Memmert Type)

(Three side heating elements)

"(MAKE : LABPRO) " Standard double wall fabrication, Inner chamber made of richly anodized

aluminum or highly polished stainless steel sheet. Exterior fabricated out of thick milled steel duly

finished in white stoving enamel/Powder coated paint with mat finished Colour combinations.

Kanthal wire heating elements provided on three sides to attain quick and uniform heating in range of

50° C to 250° C± 2° C, controlled by capillary type thermostat. L-Shaped thermometer is built- in type.

Control panel is provided with selector switch of high or low rates of power thermometer control Knob

and indicator for mains & thermostat. Supplied with cord and plug. The equipment is suitable to

operate o 220 VAC 50Hz single phase….More

Chamber size in mm / Inches No. of Capacity AL. S.S.

H W D (Approx) Shelves (Approx)

a) 300 x 300 x 300 (12‛x12‛x12‛) 2 28 ltrs.

b) 350 x 350 x 350 (14‛x14‛x14‛) 2 45 ltrs.

c) 400 x 400 x 400 (16‛x16‛x16‛) 2 65 ltrs.

d) 450 x 450 x 450 (18‛x18‛x18’) 2 95 ltrs.

e) 600 x 450 x 450 (24‛x18‛x18’) 2 125 ltrs.

f) 600 x 600 x 600 (24‛x24’x24‛) 2 224 ltrs.

g) 900 x 600 x 450 (36‛x24‛x18‛) 2 252 ltrs.

h) 900 x 600 x 600 (36‛x24‛x24‛) 2 336 ltrs.

i) 900 x 900 x 900 (36‛x36’x36’) 3 480 ltrs.

OPTIONAL:-

i). Air Circulating fan.

ii). Timer 0-24 hours.

iii). Imported Thermostat ‚EGO‛/‚ JUMO‛ German with the Accuracy of ± 1°C.

iv). Digital Temp. Indicator-cum-controller.

v). Microprocessor PID Digital temp. Indicator-cum-controller.

vi). Digital Temperature Indicator.

Note: Please ask for other capacities of your requirement.

LABPRO - Drying Oven Industrial

"(MAKE : LABPRO) " Standard sturdy double wall fabrication. Inner & outer chamber made out of

thick mild steel sheet. Inner Chamber backed silver paint finish and exterior finished in hammertone.

Heavy duty forced air blowers are provided to constantly circulated hot air to achieve uniform temp. In

the whole chamber. Double wall door is mounted on heavy hinges and provided the heavy Moulded

latch. "(MAKE : LABPRO) " Temperature is controlled by a thermostat and it can be read on dial type

thermometer. Temperature range; 50° C to 250° C ± 2° C to 5° C and equipment is workable on 220VAV

50 Hz single phase pr 440 volts AC supply….More

Chamber size in mm / Inches (H x W x D) Approx. S.S.

a). 900 x 600 x 600mm (36‛x24‛x24‛)

b). 1200 x 900 x 600mm (48‛x36‛x24‛)

c). 1500 x 900 x 900mm (60‛x36’x36‛)

d). 1800 x 1200x900mm (72‛x48‛x36‛)

OPTIONAL:-

i). Timer 0-24 Hours.

ii). Digital Temp. Indicator-cum-controller.

iii). Digital Temp. Indicator.

Note: Please ask for other capacities of your requirement.

LABPRO - Tray Dryer

"(MAKE : LABPRO) " Standard sturdy double wall fabrication. Inner & outer Chamber made out of

thick mild steel sheet. Inner Chamber backed silver paint finish and exterior finished in hammertone.

Heavy duty forced air blowers are provided to constantly circulate hot air to achieve uniform

temperature in the whole Chamber. Double wall door is mounted on heavy and provided with heavy

Moulded latch. "(MAKE : LABPRO) " Temperature is controlled by a thermostat and it and be read on

dial type thermometer. Temperature range: 50° C to 250° C to 5° C and equipment is workable on 220

VAC 50 Hz phase or 440 volts A supply. …More

Chamber Size in mm Tray Capacity Outer Inner Inner Inner

(W x D x H) Approx SS G.M.P. S.S. M.S.

a). 430 x 840 x 650 8 trays of 16‛x32‛x1¼ size.

b). 430 x 840 x 910 12 trays of 16‛x32‛x1¼ size.

c). 910 x 840 x 910 24 trays of 16‛x32‛x1¼ size.

d). 960 x1270x 1450 48 trays of 16‛x32‛x1¼ size.

e). 960 x1700x 1700 96 trays of 16‛x32‛x1¼ size.

OPTIONAL:-

i). Timer 0-24 hours.

ii). Digital Temp. Indicator-cum-controller.

iii). Aluminum Tray 16" x 32" x 1¼ size. P.O.R.

CE 134 - Incubators Bacteriological

"(MAKE : LABPRO) " Standard double wall fabrication. Inner Chamber made our of richly anodized

aluminum or highly polished stainless steel sheet and outer made out of thick mild steel sheet finished

in white stoving enamel/powder coated paint with mat finished Colour combinations. Double wall

door with double glass window for observation the chamber. Temperature range 5°C above ambient to

80°C ± 1° C controlled by a thermometer. The equipment is workable on 220 VAC 50 Hz single phase.

Chamber size in mm / inches No. Of Capacity AL SS

H D W Shelves (Approx.) Chamber Chamber

a). 300 x 300 x 300 (12‛x12‛x12‛) 2 28 ltrs.

b). 350 x 350 x 350 (14‛x14‛x14’) 2 45 ltrs.

c). 400 x 400 x 400 (16‛x16‛x16‛) 2 65 ltrs.

d). 450 x 450 x 450 (18‛x18’x18‛) 2 95 ltrs.

e). 600 x 450 x 450 (24‛x28‛x28‛) 2 125 ltrs.

f). 600 x 600 x 600 (24‛x24‛x24‛) 2 224 ltrs.

g). 900 x 600 x 450 (36‛x24‛x18‛) 2 252 ltrs.

h). 900 x 600 x 600 (36‛x24‛x24‛) 2 336 ltrs.

i). 900 x 900 x 900 (36‛x36‛x36‛) 3 480 ltrs.

OPTIONAL:-

i). Air Circulating fan.

ii). Timer 0-24 hours.

iii). Imported Thermostat ‚EGO‛/‚ JUMO‛ German with the

Accuracy of ± 1°C.

iv). Digital Temp. Indicator-cum-controller.

v). Microprocessor PID Digital temp. Indicator-cum-controller.

vi). Digital Temp. Indicator.

LABPRO - Orbital Shaking Incubators cum-B.O.D. Incubator

"(MAKE : LABPRO) " Standard double wall Construction. Outer Chamber made out of mild steel

finished in white stoving enamel/powder coated paint with mat finished Colour combinations. Inner

chamber made of stainless steel sheet. "(MAKE : LABPRO) " The double door is provided with double

glass full view window. Interchangeable platform has been provided. Temperature range 5°C above

ambient to 60°C controller with light arrangement. Variable speed control regulator controls the speed

up to 200rpm supplied complete to work on 220V AC 50Hz single phase. Capacity 16x500ml conical

flasks.

a). Capacity 16 x 500 ml. Flax temp. 5° above ambient 60°C.

b). Same as GE 106 but temperature range 5°C to 60°C with lighting arrangement.

OPTIONAL:-

i). Timer 0-24 hours day night cycle.

ii). Digital temp. Indicator-cum-Controller.

iii). Microprocessor PID Digital temp. Indicator–cum-Controller.

v). Automatic Voltage stabilizer 3-5 KVA (recommended –must).

LABPRO - Heating Mantels

"(MAKE : LABPRO) " It withstands high temperature up to 350°C. The body of the mantle is spun in

one piece from non-rusting aluminum (Up to 5.0 liters capacity) duly finished in white stoving

enamel/powder coated paint with mat finished colour combinations. "(MAKE : LABPRO) " All heating

mantles are lagged with special grade mineral wool. Works on 220/230 Volts A.C.

Capacity Wattage Complete

a) 50ml 60

b) 100ml 60

c) 250ml 150

d) 500ml 200

e) 1 Liter 300

f) 2 liters. 450

g) 3 liters. 450

h) 5 liters. 600

h) 10 liters. 2 x 600

LABPRO - Serological Water Bath (Thermostatic Water Bath)

"(MAKE : LABPRO) " Temperature range from ambient temperature to 80° C. Thermostatic control

with accuracy of ± 0.5° C to 1° C. Double walled, inside stainless steel and outside mild steel painted in

epoxy powder coating. Bath consists of two pilot lamps. Temperature control knob and on/off switch.

"(MAKE : LABPRO) " To work on 220/230 volts A.C. Supplied with or without stirring arrangement,

without racks and thermometer. Lid of water bath is made of stainless steel sheet.

Size inside Chamber (Stainless steel) Capacity (Approx)

a). 300x175x175mm (Suitable for 1 racks) 12 ltrs.

b). 300x250x175mm (Suitable for 2 racks) 14 ltrs.

c). 375x300x175mm (Suitable for 4 racks) 18 ltrs.

d). 455x300x175mm (Suitable for 6 racks) 25 ltrs.

e). 605x300x175mm (Suitable for 8 racks) 32 ltrs.

OPTIONAL:-

i). Imported Thermostat ‚EGO‛/‛ JUMO German with an accuracy of ±0.5°C.

ii). Digital temp. indicator-cum-Controller.

iii). Microprocessor PID digital temp. indicator-Cum-Controller.

iv). Stirrer with 1/20 H.P. high speed motor with stainless steel stirring rod and blade.

v). Digital temp. Indicator.

LABPRO - Water Bath Rectangular (Thermostatic Control) Double Wall

"(MAKE : LABPRO) " Temperature range from ambient temperature to 95° C. Thermostatic control

with an accuracy of ±1°C. Double walled, inside stainless steel and outside mild steel sheet painted in

epoxy powder coating. Top of the bath and concentric rings of stainless steel. To work on 230/230 volts

A.C.

Size inside(Stainless Steel) Capacity (Approx). Price

a) 300x250x100mm 6 holes of 75mm dia. 8 ltrs.

b) 335x405x100mm 12 holes of 75mm dia. 15 ltrs.

OPTIONAL:-

i). Imported Thermostat ‚EGO‛/‛ JUMO German with an accuracy of ±0.5°C.

ii). Digital temp. indicator-cum-Controller.

iii). Microprocessor PID digital temp. indicator-Cum-Controller.

iv). Stirrer with 1/20 H.P. high speed motor with stainless steel stirring rod and blade.

v). Digital temp. Indicator.

LABPRO - Water Bath Rectangular Single Wall

"(MAKE : LABPRO) " Made of stainless steel sheet. Top of the bath and concentric rings are of stainless

steel. Heating elements have an automatic cut off device when the bath gets dry. Electrically operated

on 220/230 volts A.C.

Size inside (Stainless Steel) Capacity (Approx).

a) 300x250x100mm (6 holes of 75mm dia) 8 ltrs.

b) 355x405x100mm (12holes of 75mm dia) 15 ltrs.

LABPRO - Ultra Sonic Bath

a) 9‛ x 5‛ x 2.5‛ 1.6 ut.

b) 12‛ x 6‛ x 4‛ 3.6 ut.

LABPRO - Oil Bath (High Temperature) with Stirrer

"(MAKE : LABPRO) " Double Wall Construction. Inner Chamber made of highly polished stainless

steel sheet and"(MAKE : LABPRO) " the outer is made of mild steel duly finished in white stoving

enamel/powder coated paint with mat finished colour combinations. Temperature range 50° C to 250°

C is controlled by a thermostat. Supplied complete with stirrer, diffuser shelves, cover etc.

Chamber Size in mm & inches Approx.

a). 250x250x250mm (10‛x10‛x10’’)

b). 300x300x250mm (12‛x12‛x10‛)

c). 350x350x250mm (14‛x14‛x10‛)

OPTIONAL:-

i). Mercury contact thermometer and relay with accuracy better than 1°C.

ii). Imported Thermostat ‚EGO‛/JUMO‛ German with the accuracy of ± 1°C.

iii). Digital temp. Indicator-cum-controller.

iv). Microprocessor PID digital temp. Indicator-cum-Controller.

v). Digital temp. Indicator.

LABPRO - Water Bath Incubator Shaker (Metabolic Shaking Incubator)

"(MAKE : LABPRO) " Temperature range from room temperature to 95°C. Thermostatic control with

an accuracy of ±1°C. Double walled, inside made of stainless steel and outside mild steel sheet, painted

in epoxy powder coating, Oscillating tray is riding on ball rollers. "(MAKE : LABPRO) " Shaking speed

range 40 to 140 r.p.m. Shaking tray can hold either test tubes or flask of 25ml, 50ml, 100ml. To work on

220/230 volts A.C. without R.P.M. Indicator.

Shaking Tray Size (Stainless Steel) Capacity (Approx.)

a) 275 x 275 x 150mm 12 ltrs.

b) 405 x 300 x 150mm 18 ltrs.

OPTIONAL:-

i). Microprocessor Thermostat ‚EGO‛ / ‚ JUMO‛ German with the accuracy of ±0.5°C.

ii). Digital temp. Indicator.

iii). Digital temp. Indicator –cum-Controller.

iv). Microprocessor PID Digital Temp. Indicator-cum-Controller.

v). Shaking tray for 25ml, 50ml, 100ml, 250ml, 500ml, 25mm dia. Test tubes or conical P.O.R.

flasks.

LABPRO - Walk - In – Incubators

"(MAKE : LABPRO) " Designed for vast number of incubation applications. Can be installed even in

hallway room or wherever Convenient. Design feature includes feature includes enameled mild steel

sheet exterior. Aluminum / Stainless steel, Interior ventilators, internal lighting, exhaust fan etc.

Suitable insulated 300 mm sq. inspection window at"(MAKE : LABPRO) " the door permits inside

view with –out opening the door. Complete with panel. Pre fabricated at factory assembled at site.

Complete with cord and plug to work on 220V single phase 50 Hz AC supply. Temperature range from

5° C above ambient to 60° C± 1°C. Controlled with humidity up to 95% ± 5%.

Available Sizes

W x H x D

a) 1.1x 2.3x1.1 meter.

LABPRO - Oven Vacuum

"(MAKE : LABPRO) " Double Walled construction, Inner round chamber made out of stainless steel,

exterior made our of mild steel duly finished in white stoving enamel/powder coated paint with mat

finished colour combinations. Temperature range 50° C to 130°C. "(MAKE : LABPRO) " The body

capable of withstanding vacuum of 760mm hg. Workable on 220VAC 50 Hz single phase. Supplied

without vacuum pump.

Chamber size in mm

Dia x depth Capacity(Approx.)

a) 250 x 300 mm 12 Ltrs.

b) 300 x 300 mm 17 Ltrs.

c) 300 x 500 mm 40 Ltrs.

OPTIONAL:-

i). Imported Thermostat ‚EGO‛/‛JUMO‛ German, Accuracy of ±0.1°C.

ii). Digital Temp. Indicator-cum-controller.

iii). Microprocessor PID digital temp. Indicator-cum-controller.

vi). Digital Temp. Indicator.

LABPRO - Water Still (Manasty type) Wall hanging Stainless Steel

"(MAKE : LABPRO) " Wall Hanging casted aluminum vessel is electrically operated for getting

pyrogen-free distilled water automatically. Wall hanging arrangement is provided. The condenser is

seamless . Fitted With automatic ejection device "(MAKE : LABPRO) " which operates automatically

when water vessel gets dried. The baffle cup and condenser are made out of thick stainless steel sheet.

Output Capacity (Approx.)

a). Output approx. 2/3 liters per hour.

b). Output approx. 3/4 liters per hour.

c). Output approx. 5/6 liters per hour.

LABPRO - Water Still (Barnstead type) Table Model

Stainless Steel Double Wall body.

Output Capacity (Approx.)

a). Output approx. 4/5 liters per hour.

b). Output approx. 8/9 liters per hour.

c). Output approx. 15/6 liters per hour.

d). Output approx. 25/26 liters per hour.

LABPRO - Double Distillation Still Stainless Steel body.

Output Capacity (Approx.)

a). Output approx. 6/8 liters per hour. Double distilled water.

LABPRO - Rectangular Muffle Furnace (Laboratory Model)

"(MAKE : LABPRO) " Outer Shell made out of thick mild steel duly finished in attractive stoving

enamel/powder coated paint. Fitted with grooved refractory for supporting the heating elements made

out of Kanthal wire and are easily replaceable. "(MAKE : LABPRO) " Maximum temp. 1000°C and

working temp.900°C controlled by SUNVIC energy regulator. Complete with indicators, pyrometer,

thermocouple, thermal fuse etc, Workable on 220VAC 50Hz single phase.

Inner Muffle Size in mm & Inches.

a). 225 x 100 x 100 (9" x 4" x 4")

b). 250 x 125 x 125 (10" x 5" x 5")

c). 300 x 125 x 125 (12" x 5" x 5")

d). 300 x 150 x 150 (12" x 6" x 6")

e). 300 x 200 x 200 (12" x 8" x 8")

f). 350 x 175 x 125 (14" x 7" x 5")

g). 475 x 175 x 125 (19" x 7" x 5")

h). 450 x 225 x 225 (18" x 9" x 9")

OPTIONAL:-

i). Digital temp. Indicator-cum-controller instead of energy regulator

and pyrometer.

ii). Microprocessor PID digital temp. Indicator-cum-controller instead

of energy regulator, pyrometer.

LABPRO - High Temperature Furnace 1200°C. (Industrial) With Digital Controller

"(MAKE : LABPRO) " The Furnace is insulated the ceramic fiber blanket of high density for better

insulation. The furnace can run continuously at 1150° C, trouble free. The Furnace is quick heating

type, light in weight, table mounting type, compact elegant in design. Outer painted in epoxy powder

coating. "(MAKE : LABPRO) " The hinged type swing door insulated with ceramic fiber to avoid heat

losses from the door. The Furnace is fitted with digital temperature controller-cum –indicator to avoid

over heating for long life and trouble free working. The panel is fitted at the top of the furnace.

Muffle Size in mm & Inches.

a). 225 x 100 x 100mm (9" x 4" x 4")

b). 250 x 125 x 125mm (10" x 5" x 5")

c). 300 x 150 x 150mm (12" x 6" x 6")

d). 300 x 200 x 200mm (12" x 8" x 8")

e). 450 x 225 x 225mm (18" x 9" x 9")

OPTIONAL:-

i). Microprocessor PID digital temp. Indicator-cum-controller.

Note: 1400°C Muffle Furnace can be offered on demand.

LABPRO - Magnetic Stirrer with Heating System

"(MAKE : LABPRO) " It has a compact stirring device utilizing magnetic field (Created by a

PERMANENT MAGNET) which induces variable speed stirring action. Stirring is accomplished by

mean of small Teflon rotor, which when placed to be stirred is capable or rotation by magnetic filed

applied from below the Container. "(MAKE : LABPRO) " The unit is fitted with pilot lamp. Works on

220/230 volts A.C.

Capacity

i). 1 Liter

ii). 2 Liter

iii). 5 Liter

LABPRO - Laboratory Stirrer

The motor stirrer having maximum speed up to 4000 r.p.m. Unit is clamped to C.P. rod fitted on a

Heavy cast iron base. The height and angle of the stirrer can be adjusted according to the requirement.

Variable speed motor with 1/20 H.P. Regulator is fitted with S.S. stirrer rod to give smooth and

noiseless operation.

OPTIONAL:-

i). Automatic 0-60 minutes Timer

LABPRO - Hot Plates

"(MAKE : LABPRO) " Body is fabricated out of thick mild steel sheet duly finished in white stoving

enamel/powder coated paint with mat finished colour combinations. The hot plate made of cast iron or

top is made of highly polished stainless steel sheet precisely machined & smoothed duly finished in

heat resistant black paint if firmly mounted on the body. "(MAKE : LABPRO) " Heavy duty heating

elements are securely layed under the plate to operate on 220V AC 50 HZ single phase. Temp is

controlled by a three heat rotary switch//energy regulator as per demand.

a). Hot Plate: (ROUND) Single

Specification as above with 20 cm (8‛) dia. Moulded top/SS sheet top.

b). Hot Plate: (ROUND) Double

Specification as above but with Two plates of 20 cm (8‛) dia.

Having independent pilot lamps & switches.

c). Hot Plate (COIL TYPE)

LABPRO - Hot Plates (Rectangular)

"(MAKE : LABPRO) " Body is fabricated out of thick mild steel sheet duly finished in white stoving

enamel/powder coated paint with mat finished colour combinations. The hot plate made of cast iron or

top is made of highly polished stainless steel sheet precisely machined & smoothed duly finished in

heat resistant black paint if firmly mounted on the body. "(MAKE : LABPRO) " Heavy duty heating

elements are securely layed under the plate to operate on 220V AC 50 HZ single phase. Temp is

controlled by a three heat rotary switch//energy regulator as per demand.

Following standard sizes are available:

a) 30 x 25cm (12" x 10")

b) 40 x 25cm (16" x 10’’)

c) 45 x 30cm (18" x 12")

d) 60 x 45cm (24" x 18")

OPTIONAL:-

i). SUNVIC energy regulator can be provided against routine energy regulator. P.O.R.

ii). Digital temp. Indicator-cum-controller.

Note: Other Size can be offered on demand.

LABPRO - Slide Warming Table

"(MAKE : LABPRO) " Temperature range ambient temp. to 70° C i.e. below the melting point of wax.

The temperature is thermostatically controlled. The body is made our of thick mild steel duly finished

in white stoving enamel/powder coated paint with mat finished colour combinations and top is made

of highly polished aluminum sheet. "(MAKE : LABPRO) " To work on 220VAC 50 Hz single phase.

Top Plate size (Length x width)

a) 30x25cm (12‛x10‛)

b) 40x25cm (16‛x10‛)

c) 45x30cm (18‛x12‛)

d) 60x15cm (24‛x6‛)

LABPRO - Rotary Shaker (VDRL Rotator) Variable Speed

"(MAKE : LABPRO) " Suitable For VDRL and other agglutination tests, blood grouping tests and for

mixing of solutions in small flasks, beakers or bottles. Body made of sturdy mild steel sheet duly

finished in stoving enamel/power coated paint. Tray type platform size 300x300mm can take cavity

slides, bottles flask etc; for shaking at a fixed speed by the help of Baring & Chem. . "(MAKE :

LABPRO) " Standard fixed speed 180RPM. An automatic 60 minutes timer can be provided against

extra cost as optional by which shaking duration can be set. To work on 220V AC 50Hz single phase.

NOTE: - variable speed rotator can be offered on demand.

OPTIONAL: - (Extra Cost)

i). 0-60 minutes timer.

LABPRO - Shaking Machine (Wrist Action)

"(MAKE : LABPRO) " Heavy cast iron base with sturdy construction with two arms for holding flaks.

A heavy duty fractional motor with variable speed through continuously variable speed controller is

provided. The holder can hold flasks of capacity 100 to 1000ml. Supplied complete with cord & plug

etc. To work on 220V AC 50Hz single phase. "(MAKE : LABPRO) " Speed 80-280 oscillations per

minute.

Capacity of holding

a). 4 flasks

b). 8 flasks

c). 12 flasks

OPTIONAL:-

i). Automatic 0-60 minutes timer.

LABPRO - Vortex Shaker/Cyclo Mixer (Test Tube Shaker)

"(MAKE : LABPRO) " Useful for accelerated mixing of solutions in test tubes, small flasks or

centrifugal tubes etc. The housing is 150x150mm. The speed is regulated by a speed control devices.

Shorts eccentric strokes motor imparts vigorous agitation to the tubes or flasks. "(MAKE : LABPRO) "

Body is strong and finished in white stoving enamel/powder coated paint with mat finished colour

combinations. The equipment is workable on 220V AC 50 Hz Single phase.

LABPRO - Reciprocating Shaking Machine (Kahn Rack Type)

"(MAKE : LABPRO) " Designed for shaking KAHN racks, bottles, flasks or different size by adjusting

compartments. Fitted with heavy duty motor to work on 220V, AC 50Hz single phase. The rate of

motion is adjustable mechanically by belt tension. Speed is fixed in same models to approximately 275.

Size of Carrier Strokes per Minutes Motor Body Type

a) 20" x 13" x 4" 275 0.25 HP Open

b) 20" x 13" x 4" 275 0.25 HP Covered

c) 20" x 13" x 4" 150 to 250 0.25 HP Open

d) 31" x 17" x 4" 150 to 250 0.25 HP Covered

e) 36" x 18" x 4" 150 to 250 0.50 HP Covered

OPTIONAL:-

i). 0-60 Minutes timer.

Note: - Shaking Machines of other specification can be offered on demand.

LABPRO - Rotary Shaker (Platform Type)

"(MAKE : LABPRO) " Body made out of thick mild steel finished in stoving enamel/powder coated

paint. Heavy duty motor of suitable capacities are provided for long duration operations. "(MAKE :

LABPRO) " Fixed speed and variable speed models are offered. Platform is provided with rubber disc

or stainless steel clamps to hold flasks. To work on 220V AC 50Hz single phase. The choice available

are:-

Platform Size Holding Cap. Motor HP

a) 45 x 45cm 25flasks of 100ml 0.25

b) 45 x 45cm 36 flasks of 50ml 0.25

c) 45 x 45cm 15 flasks of 250ml 0.25

d) 55 x 55cm 25 flasks of 250ml 0.25

e) 65 x 65cm 36 flasks of 250ml 0.25

f) 100 x 100cm 81 flasks of 250ml 1.00

g)100 x 100cm 81 flasks of 250ml 1.00

OPTIONAL:-

i). 0-60 Minutes Timer.

Note: - Specific Sizes & capacities can be offered on demand.

LABPRO - Melting Point Apparatus

For determination of melting points up to 350° c. "(MAKE : LABPRO) " The mounted block is

illuminated from below by A lamp fixed in its housing. The aluminum block accepts three

capillary tubes and mercury there Momentary. The temperature is regulated by energy

regulator fitted to the unit. The lamp provides "(MAKE : LABPRO) " Uniform and shadows less

light, regulator fitted to the unit. Supplies without capillary tubes and

Thermometer.

LABPRO - Melting Point Apparatus (With Cooling Plug)

LABPRO - Melting Point Apparatus (Fully Auto and Digital)

OPTIONAL:-

i). Thermometer 360°C. P.O.R.

ii). Capillary Tube Set. P.O.R.

iii). Cooling Plug. P.O.R.

LABPRO - Medico / Clinical Centrifuge

Electrical operated dome type sturdy stable heavy body with resiliently mounted motor working on

220V AC 50Hz single phase for vibration free performance with built in 5-speed regulator and non-

removable swing out rotor. Complete with tube carries. Maximum speed 3500 RPM. "(MAKE :

LABPRO) " Neatly finished in stoving enamel.

Capacity

a). 4 x 15ml tubes.

b). 6 x 15ml tubes.

c). 8 x 15ml tubes.

OPTIONAL: -

i). Automatic 0-60 minutes timer.

LABPRO - Centrifuge Rectangular (Research)

4000 to 5000 R.P.M. fitted with electronic solid state speed regulator top cover made of transparent

acrylic sheet cord & plug.

Capacity

a). 4 x 15ml tubes.

b). 6 x 15ml tubes.

c). 8 x 15ml tubes.

d). 12 x 15ml tubes.

OPTIONAL:-

i). Automatic Timer (Manual)

ii). Automatic timer (Digital)

iii). Speed meter (Manual)

iv). Speed meter (Digital)

LABPRO - Vacuum Pump

Vacuum pumps are V Belt driven at 400 rpm and fitted with electric motor mounted on a cast iron base

plate. Material of construction is specially chosen (graded cast iron) and all the parts are precisely

machined. Micron finished and assembled to close tolerance for high efficiency. Pumps are supplied

either single stage or double stage. "(MAKE : LABPRO) " Single stage pump creates maximum vacuum

of 0.01mm Hg. Column and double stage creates 0.001 hg. Suitable to work 220V single phase, 50Hz

AC supply.

Following is the range of Vacuum pumps (Single/Double stage)

Capacity Motor Stage

a) 32 lt/mm 0.25hp i). Single Stage

ii). Double Stage

b) 50 lt/mm 0.25hp i). Single Stage

ii). Double Stage

) 75 lt/mm 0.25hp i). Single Stage

ii). Double Stage

d) 100 lt/mm 0.50hp i). Single Stage

ii). Double Stage

OTIONAL:-

i). Vacuum Gauge with regulator

ii). Belt guard

iii) Moisture Trap

iv). Non-returnable Value

v). Air Blast

LABPRO -Oil Free Vacuum Pump

A portable diaphragm type vacuum pump oil free LABPRO manufactured from special grade

aluminum for light weight and strength. Built-in Micro Suction Filter

Diaphragms are made of 2-play nylon reinforced neoprene rubber and valves are of SS 316 with

special sealed bearing thus eliminating lubrication.

Vacuum Pump Oil Free most ideal for use with Rotary Vacuum Evaporators, Vacuum Ovens

etc, for continuous operations without the fear of sample contaminations through oil vapours.

Useful for general laboratory applications where even a slightest environment/sample

contamination through oil mist is

forbidden. 100% Oil Less Vacuum Pump.

Exclusive Oil - less construction of diaphragm never requires lubrication.

Continuously rated with built-in rugged motor.

LABPRO Most ideal use with Rotary Vacuum Evaporators, Vacuum Ovens etc, for continuos

operators without the fear of sample contaminations through oil vapours.

LABPRO Vacuum Pump Oil Free is very useful for general laboratory applications where even

a slightest environment/ sample contamination through oil mist is forbidden 100% LABPRO

Oil Less Vacuum Pump.

Exclusive oil-less construction of diaphragm never requires lubrication.

Continuously rated with built-in rugged motor LABPRO

Permanently lubricated ball bearings.

Portable(LABPRO) Light weight die-cast aluminium components keep overall weight minimal.

Low noise level.

LABPRO - Glass Bed Sterilizer

a). Crucuble size : 2‛ Dia x 2‛ Depth

b). Crucuble size : 2‛ Dia x 6‛ 1/2‛ Depth

LABPRO - Humidity Cabinet

.

Catalogue

No.

Max. Vacuum (lts./min.) Max

Press (In Hg) Motor (Psig) HP

LABPRO-

67 25litr 27" 35 1/16

Extremely useful as Vacuum Pump in Laboratories, filtration

instruments, gas charging suction and labeling machines, etc.

equally useful as compressor in flame. photometers,

Spectrophotometers, Nebulizer. It works on 220 Volts × 10%, 50

Hz A.C. The available models are as under:

"(MAKE : LABPRO) " Temperature range ambient temperature to 60°C. Temperature controlled by a

hydraulic thermostat with an accuracy of ±1°C with built-in horizontal ‘L’ shape thermometer. The

humidity is controlled by humidistat from atmospheric humidity to 95% with a sensitivity of ±3%.

Double walled inside anodized aluminum/stainless steel and"(MAKE : LABPRO) " outside mild steel

painted in epoxy powder coating. The door has glass Window. To work on 220/230 volts .A.C. inside

water tank is made of stainless steel.

Size inside Chamber (W x D x H) Capacity (Approx.)

a) 455 x 455 x 455mm 95ltrs.

b) 455 x 455 x 710mm 147ltrs.

c) 605 x 605 x 605mm 227ltrs.

d) 605 x 605 x 910mm 335ltrs.

OPTIONAL:-

i). Hygrometer (Humidity Indicator).

ii). Digital Temp. controller-cum-indicator.

iii). Imported Thermostat ‚EGO‛/‛JUMO’ German with the accuracy of ±0.5°C.

iv). Microprocessor PID digital Temperature Indicator-cum-Controller.

v). Automatic electronic controller with digital display for Temp. & Humidity

combined.

vi). Automatic voltage stabilizer 3KVA (Recommended).

LABPRO - Environmental Chamber Humidity Cabinet

(Temperature Control/”Digital”)

LABPRO General specification as GE 148 but with added specification for low temp. Control &

humidity . The inner working chamber is made out of stainless steel. "(MAKE : LABPRO) " The

temperature can be controlled from 10°C to 60°C ± 2°C and humidity from 55% to 95% ± 5% RH

Temperature below ambient is controlled by hermetically sealed compressor complete with accessories

provided below the unit. "(MAKE : LABPRO) " Two stainless steel water reservoirs heated by

immersion heaters are provided to create humidity. Complete with all accessories. Control panel

provided with control switches and indicators.

Chamber Size in mm (W x D x H) Capacity (Approx.)

a) 455 x 455 x 455mm 95ltrs.

b) 455 x 455 x 710mm 147ltrs.

c) 605 x 605 x 605mm 225ltrs.

d) 605 x 605 x 910mm 335ltrs.

OPTIONAL:-

i). Hygrometer (Humidity Indicator).

ii). Digital Temp. controller-cum-indicator.

iii). Imported Thermostat ‚EGO‛/‛JUMO’ German with the accuracy of ±0.5°C.

iv). Microprocessor PID digital Temperature Indicator-cum-Controller.

v). Automatic electronic controller with digital display for Temp. & Humidity

combined.

LABPRO-PLANT GROWTH CHAMBERS

full view inner acrylic door which "(MAKE : LABPRO) " will allow inspection of samples without disturbing

the temperature of working chamber. The plant growth chamber shall be mounted on casters for smooth

shifting of chamber from one place to another. "(MAKE : LABPRO) " The chamber shall be supplied with

three number . "(MAKE : LABPRO) " heavy dutystainless steel shelves. Viewing window having dimension

35cm x 35cm shall be given on the two sides with flourecent tube lights if you want to switch off the tube light

natural light may be given in the chamber from the two sides.

PHOTOPERIODIC SYSTEM

The temperature in the chamber is controlled by dual temperature micro processed based Electronic

Indicator-cum-controlled to regularise "(MAKE : LABPRO) " the two temperatures one for day and one for

night with the help of microprocessed 7 days programmable Timer. "(MAKE : LABPRO) " Temperature may

be controlled from 15°C to50°C. In day time when the full lights are on.

COOLING SYSTEM

The chamber has cooling system by sealed compressor with all accessories and fan cooled condensor are fitted

at the bottom exactly below the working chamber to give efficient cooled desired temperature.

LIGHTING SYSTEM_The chamber has provision to give light upto 50Kx (50,000 Lux) from the top of the

chamber. The growth chamber has been made to control the light intensity thus it gives microclimate radiation

stimulated spectrum adjustable 50 K Lux. "(MAKE : LABPRO) " Light intensity may given on higher side if is

required. We give mixture of light by incandescent lamp, fluorescent lamps and sodium vapour lamps.

HUMIDITY CONTROL SYSTEM_

A versatile controlled Environment Chamber useful for plant growth &

animal studies. This Chamber provides the necessary light, enclosed

humid atmosphere and warmth for successful plant growth in a

laboratory. Suitable for investigation in the eftect of day light on

flowering cycle, growth rate etc. "(MAKE : LABPRO) " The Chamber is

double walled insulated with 75mm thick super glass wool between

interior and exterior walls. Outer chamber is made of mild steel and

finished with durable epoxy powder coating paint. The inner chamber is

made of stainless steel 304 Olty. The chamber shall have

"(MAKE : LABPRO) " Humidity in the chamber is controlled from 40% to 95% by Humiditistat and injection

of water vapour inside chamber thus making the environment in controlled condition. "(MAKE : LABPRO) "

To work on 220 Volt A.C.5O Cycle complete with voltage stabilizer.

LABPRO - Humidifier Capacities: 3 Liters

Humidifier is basically an Atomizing Humidifier of splash plate rotating disc type. "(MAKE :

LABPRO) " Designed to give relative humidity as high as up to 95% RH in enclosed areas. Humidifier

is a portable unit body made of aluminum/Stainless steel. Capable of atomizing up to three liters of

water in an hour at full evaporation in "(MAKE : LABPRO) " the driest possible ambient conditions.

Provided with "(MAKE : LABPRO) " automatic flout valve assembly to work on 220VAC. Capacity: 5

liters.

OPTIONAL:-

i). Contort box with Humidistat for controlling humidity.

LABPRO - De-Humidifier

(With Digital Humidity Indicator-cum-Controller)

(Fitted with time controlled safety device in, case humidity controller fails, for safety of the compressor)

These are water condensing type, based on ‚Refrigeration Cycle‛ to avoid use of expensive chemicals

required for desiccant type models. The unit is self standing and is mounted on a study angle iron

frame. Fitted with castor wheels. "(MAKE : LABPRO) " It removes excess moisture from the

atmosphere and Is fitted with hermetically sealed compressor. Heat exchanger and water condensing

coils are made of copper. Water collection tank is provided below the unit is collect condensate water.

Humidity is controlled by HUMIDITY CONTROLLER is corporate in the unit, up to 30% ± 30% RH,

depending upon the ambient conditions. To achieve very low humidity, the room should have a

independent window type air conditioner to much with the dehumidifier heat load in the room.

Suitable to work on 220/230volts A.C. Supply.

OPTIONAL:-

i). Automatic Voltage Stabilizer 4.0 KVA (Recommended).

LABPRO - Tissue Culture Hood

Made of sun mica clad thick wooden board and sun mica clad working top. The unit has frame at front

fitted transparent flexi glass and has an arrangement for keeping the door open if desired. "(LABPRO) "

Fitted with U.V. Germicidal light and one Fluorescent tube.

Outside Size:

a). 1200 x 600 x 600 mm (ht. at back)

OPTIONAL:-

i). Exhaust System

ii). Stainless Steel Top in lieu of Sunmica top.

LABPRO – Deep Freezer (Horizontal Type)

"LABPRO" brings the ultra-high-tech Microprocessor controlled, solid-state Low Temperature Cabinet

(Horizontal Models- Chest Opening type) micro control and CFC free refrigeration system. to meet various

standard applications in diverse industrial applications such as medical, agricultural institutions, bio-

chemical industrial and research laboratories.

It is ideal laboratory freezer to provide a perfect freezing environment for the preservation of vaccines,

blood plasma, test samples, "(LABPRO) " specimens at desired temperature (Available in 3 Models i.e. -20C,

-30C, -40C.)

Also used for preservation of red blood plasma, white blood cell, skin, bone, bacteria, semen, biomedical

product in small medium and large blood centers.

Suitable for hospitals, drugstore, pharmaceuticals factories, sanitation and anti-epidemic stations and

clinics.

Size in Feet Capacity Outer S.S. Outer S.S

(L x W x D) Approx Inner G.P. Inner S.S.

A) 3.5 ft. x 2 ft. x 3 ft. 150 Liters

B) 4 ft. x 2 ft. x 3 ft. 200 Liters

C) 5 ft. x 2 ft. x 3 ft. 300 Liters

D) 6 ft. x 2 ft. x 3 ft. 425 Liters

LABPRO – Bottle Cooler (Horizontal Type)

Size in Feet Bottle Outer S.S. Outer S.S

(L x W x D) Approx Capacity Inner G.P. Inner S.S.

A) 3.5 ft. x 2 ft. x 3 ft. 320 Bottle of 300 ml.

B) 4 ft. x 2 ft. x 3 ft. 400 Bottle of 300 ml.

C) 5 ft. x 2 ft. x 3 ft. 500 Bottle of 300 ml.

D) 6 ft. x 2 ft. x 3 ft. 600 Bottle of 300 ml.

LABPRO – Vertical Refrigerator (Commercial Type)

"(LABPRO) " brings the ultra-high-tech Microprocessor controlled, solid-state Low Temperature Cabinet

(Vertical Models) with micro control and CFC free refrigeration system. to meet various standard

applications in diverse industrial applications such as medical, agricultural institutions, bio-chemical

industrial and research laboratories.

It is ideal laboratory freezer to provide a perfect freezing environment for the preservation of vaccines,

blood plasma, test samples, specimens at desired temperature (Available in 3 Models i.e. -20oC, -30C, -40C.)

Also used for preservation of red (LABPRO) blood plasma, white blood cell, skin, bone, bacteria, semen,

biomedical product in small medium and large blood centers.

Suitable for hospitals, drugstore, pharmaceuticals factories, sanitation and anti-epidemic stations and clinics

Size in Feet No. Of Outer S.S. Outer S.S

(H x W x D) Approx Door Inner G.P. Inner S.S.

A) 5 ft. x 4 ft. x 2 ft. 2 Door

B) 5 ft. x 4 ft. x 2 ft. 4 Door

C) 6 ft. x 4 ft. x 2 ft. 2 Door

D) 6 ft. x 4 ft. x 2 ft. 4 Door

LABPRO – Display Counter

Size in Running Feet Glass Outer & Inner S.S.

A). H x L x D Round

B). H x L x D Plain

LABPRO – Water Cooler

Tank Capacity Cooling Capacity Outer & Inner S.S.

A) 30 Liters 20 Liters

B) 60 Liters 40 Liters

C) 80 Liters 60 Liters

D) 100 Liters 80 Liters

E) 120 Liters 100 Liters

F) 165 Liters 150 Liters

G) 220 Liters 200 Liters

LABPRO – Hot & Cold Water Dispenser

A) Table Model

B) Standing Model (Without Freeze)

B) Standing Model (With Freeze)

LABPRO – Ice Cube Machine

A) Cube Capacity 10 Kgs per 12 Hrs.

LABPRO – Chillers Plant

Tank Capacity Compressor Capacity Outer M.S. Outer S.S

(In Liters) Inner S.S. Inner S.S.

A) 250 Liters 1 Compressor of 1.5 Ton

B) 500 Liters 2 Compressor of 1.5 Ton

C) 500 Liters 1 Compressor of 2 Ton

D) 1000 Liters 2 Compressor of 2 Ton

E) 1000 Liters 4 Compressor of 1.5 Ton

F) 2000 Liters 2 Compressor of 2 Ton

G) 2000 Liters 4 Compressor of 2 Ton

Hostel Kitchen Service Equipments: 1. One Burner Cooking Range (L.P G) S.S Body

2. Two Burner Cooking Range ( L.P.G)

3. Three Burner Cooking Range (L.P.G)

4. Diesel Burner Cooking Range

5. Chapatti Plate Cum Puffer (Size 2’x4’ 2’x3’Plate 1’x2’ Puffer)

6. Dose Plate ( Two Piece)

7. Chinese Cooking Range One Burner

8. Chapatti Warmer (One Time 1000 Chapatti Oven Type)

9. Toaster (6 Piece) M.S Body with Electric Elements

10. Toaster (24 Pieces) M.S Body with Electric Elements

11. Vegetable Food Warmer Electric, L.P G, Kerosene Stove

(S.S 25 liter with Four Vessels)

12. Wet Grinder Electric 3 Ltrs.

13. Wet Grinder Electric 5 Ltrs.

14. Potato Peeler Electric ( 5 Kg

15. Potato Peeler 10 Kg)

16. Atta Kneading Machine Electric( 10Kg)

17. Atta Kneading Machine Electric( 15Kg)

18. Rice Warmer Electric (5Kg)

19. Rice Warmer Electric (10Kg)

20. Rice Warmer Electric (15Kg)

21. Dry Macula Grinder Electric

22. Automatic Chapatti Making Machine

23. Vegetable Cutting Machine(6 Blade)

24. Fly Killer Aluminium Body (With 2 Tube)

25. Tea and Milk Boiler (10 Ltrs) S.S Body

26. Coffee Plant (100 Cups)

27. Electric Tan Door

28. Gas Tan Door

29. Hand Shop ear

30. Two Door Vertical Refrigerator

31. Three Door Vertical Refrigerator

32. Four Door Vertical Refrigerator

33. Deep Freezer S.S 4’x2’x3’

34. Ice Cream Parole size 5’

35. Water Cooler (100 Ltrs)

36. Water Cooler (150 Ltrs)

37. Water Cooler (200 Ltrs)

38. Working Table with Two Selves (4’x2’x2. ½‛) S.S Sheet 202

39. Work One Table With Sink(4’x2’x2. ½‛)

40. Two Sink Unit (4’x2’x2. ½‛)

41. Plate Rack(50 Plate)

42. West Trolley (3½‛x2’x2’)

43. Service Counter (4’x2’x2½‛)

Ice Making Machine Feed Water : DM/DI/Filtered water

Total Capacity : 4 -6Kg/Hr (24 Hrs Basis)

Minimum Time for flakes : 30 minutes

Outer MOC: SS hairline finish 340 body mounted on

roller wheels

Bin Capacity : 25Kg

Bin MOC : SS 304

Size of Flakes : 2mm

Bin insulation : PUF

Power Supply : 230V+10%, 50Hz, AC, Single phase

Motor : Reduction gear, 1/4 hp, 960rpm

Over Load : 15amp

Ice Crusher Drive : Induction motor coupled to Reduction gear

Moc : SS and Brass

Water Tank : SS inbuilt float sensor for automatic water supply to

Evaporator

Refrigeration : Through CFC air cooled refrigeration system with

Hermetically sealed Compressor Condenser fan

assembly and refrigerant

Controls :

Auto Cut in Case of

i) No feed water supply available from tank

ii) Ice flakes bin is full

iii) Overload protection for motor and refrigeration unit.

Physics Lab

Biotechnology Lab

(Scientific Instruments/Micro slides/Models/Charts/Glass

wares/chemicals)

We are an affluent manufacturer, exporter and supplier of a wide range of

Physics Lab Equipment that is manufactured by our experts using

supreme quality components while keeping in mind the set international

standards. This range of equipment is widely appreciated by the clients for

its high strength, dimensional stability, durability.

(Scientific Instruments/Micro slides/Models/Charts/Glass-

wares/Chemicals)

Botany Lab

(Scientific Instruments/Micro

slides/Models/Charts/Glasswares/Chemicals)

Microbiology Lab

(Scientific Instruments/Micro

slides/Models/Charts/Glasswares/Chemicals)

(Scientific Instruments/Micro

slides/Models/Charts/Glasswares/Chemicals)

Zoology Lab

Pharmacy Quality Control Lab

(Scientific Instruments/Charts/Glasswares/Chemicals)

Pharma Microbiology Lab

(Scientific Instrumentss/Glasswares/Chemicals)

Biochemistry Lab

(Scientific Instrumentss/Glasswares/Chemicals)

ISO 9001:2008 CE. Address :

LABPRO INTERNATIONAL HEAD OFFICE

48-A KUNJ VIHAR BEHIND B.D. FLOOR MILL

AMBALA CANTT-133001(HARYANA)

CONTACT NO.

PHONE NO . 9034101997

info@labprostore.com

labprointernational@gmail.com

purchase@labprostore.com

labpro@india.com

www.labproworld.in

www.labprostore.com

www.labprointernational.com

www.labproambala.com

www.labprowarranty.com