Lab-5) Package and Deploy
-
Upload
akashhoney71 -
Category
Documents
-
view
221 -
download
0
Transcript of Lab-5) Package and Deploy
-
7/28/2019 Lab-5) Package and Deploy
1/19
Instructor Exercises Guide
Course materials may not be reproduced in whole or in part
without the prior written permission of IBM.
Copyright IBM Corp. 2004, 2007 Exercise 13. Package and Deploy a J2EE Application 13-1
.
EXempty Exercise 13.Package and Deploy a J2EEApplication
Estimated Time
00:30
What This Exercise Is About
This exercise takes the library application that has been developed
and tested in IBM Rational Application Developer and exports it for
deployment on a server.
What You Should Be Able to Do
At the end of the lab, you will be able to:
Package an application as an EAR file and export it from the IBM
Rational Application Developer environment
Install the EAR file on IBM WebSphere Application Server
Test the application on a browser
Introduction
The integrated development environment of IBM Rational Application
Developer has many advantages, not the least of which is the
behind-the-scenes aspect of testing. This means that Run on Server
will automatically deploy and install code, open a browser, and run a
Web application. However, a completed application will need to be
packaged, exported from this environment, and installed on a remote
server.
This exercise simulates this process. Although the server is the samelocal server that has been used for testing, it is in fact a stand-alone
WebSphere Application Server that can be used outside of the
Rational Application Server environment. In this exercise, you will
export the Web application (packaged in an EAR file), then use the
WebSphere Application Server Administrative console to install and
configure it. Finally, you will test it using an external browser.
-
7/28/2019 Lab-5) Package and Deploy
2/19
Instructor Exercises Guide
Course materials may not be reproduced in whole or in part
without the prior written permission of IBM.
13-2 Developing Web Applications Copyright IBM Corp. 2004, 2007
Required Materials
This exercise requires the database to be set up in a specific way
using files that can be found in the \Deploy\imports
directory. Make sure you have these files before starting the lab.
Instructor Exercise Overview
It is difficult to create a truly real-life situation when the only environment available is a
standalone computer! Before students begin this exercise, draw diagrams on the
whiteboard showing how the single environment of Rational Application Developer
development becomes the multiple environment of deployment. Here is an example:
All the required steps are simple, and students will have done many of them several times
during the week. It is therefore very important to set the scene and explain exactly why theyare doing this exercise.
-
7/28/2019 Lab-5) Package and Deploy
3/19
Instructor Exercises Guide
Course materials may not be reproduced in whole or in part
without the prior written permission of IBM.
Copyright IBM Corp. 2004, 2007 Exercise 13. Package and Deploy a J2EE Application 13-3
.
EXempty Exercise Instructions
Preface
The following references in the exercise instructions represent directory locations in your
workstation:
: C:\LabFiles70
: C:\IBM\SDP70
-
7/28/2019 Lab-5) Package and Deploy
4/19
Instructor Exercises Guide
Course materials may not be reproduced in whole or in part
without the prior written permission of IBM.
13-4 Developing Web Applications Copyright IBM Corp. 2004, 2007
13.1. Prepare the Workspace
If you skipped previous labs, specifically labs 1-4, perform the following instructions:
__ 1. Start IBM Rational Application Developer.
__ a. In the Workspace Launcher dialog, specify \workspace as thenew workspace directory.
__ b. Click OK to open the workspace.
__ c. Import the \Profile\solution\ProfileSolution.zip project
interchange file. If you need assistance, refer to the instructions in the Appendix,
Install the Library Application in a New Workspace.
-
7/28/2019 Lab-5) Package and Deploy
5/19
Instructor Exercises Guide
Course materials may not be reproduced in whole or in part
without the prior written permission of IBM.
Copyright IBM Corp. 2004, 2007 Exercise 13. Package and Deploy a J2EE Application 13-5
.
EXempty 13.2. Reset the Database
In the previous lab, the Library database was populated in a specific way to demonstrate
profiling. Now it needs to be set back to its original state. If you skipped the profiling lab,
you can skip to section 13.3.
__ 2. Ensure that the WebSphere Application Server is stopped.
__ a. In the Servers view, right-click WebSphere Application Server v6.1 and select
Stop.
__ 3. Import new database configuration files to reset the database default value.
__ a. In the Project Explorer, right-click LibraryDatabaseSetup and select Import.
__ b. Select File System in the Import dialog, then click Next.
__ c. In the From Directory field, browse to \Deploy\imports.
__ d. Click Select All to select all files in the imports folder.
__ e. Select Overwrite existing resources without warning. Also make sure the
Into folder is set to LibraryDatabaseSetup.
-
7/28/2019 Lab-5) Package and Deploy
6/19
Instructor Exercises Guide
Course materials may not be reproduced in whole or in part
without the prior written permission of IBM.
13-6 Developing Web Applications Copyright IBM Corp. 2004, 2007
__ f. Click Finish.
__ 4. Recreate the database.
__ a. In the Project Explorer, expand LibraryDatabaseSetup driver.
__ b. Right-click SetUpLibraryDatabase.java and select Run As Java
Application.
__ c. The following messages should be shown in the Console view.
Drop existing tables (if they exist)
SQL Executed with no errors:
SQL Executed with no errors:
SQL Executed with no errors:
SQL Executed with no errors:
SQL Executed with no errors:
SQL Executed with no errors:
Create the library tables
SQL Executed with no errors:
SQL Executed with no errors:
SQL Executed with no errors:
SQL Executed with no errors:
SQL Executed with no errors:
SQL Executed with no errors:
Load the item table
A total of 6 records were processed
There were 6 rows added without errors
There were 0 warnings and 0 errors
Load the patron table
A total of 6 records were processed
There were 6 rows added without errors
There were 0 warnings and 0 errors
Load the copy table
A total of 13 records were processed
There were 13 rows added without errors
There were 0 warnings and 0 errors
Load the onloan table
A total of 6 records were processed
There were 6 rows added without errors
There were 0 warnings and 0 errors
-
7/28/2019 Lab-5) Package and Deploy
7/19
Instructor Exercises Guide
Course materials may not be reproduced in whole or in part
without the prior written permission of IBM.
Copyright IBM Corp. 2004, 2007 Exercise 13. Package and Deploy a J2EE Application 13-7
.
EXempty Load the tablemax table
A total of 3 records were processed
There were 3 rows added without errors
There were 0 warnings and 0 errors
-
7/28/2019 Lab-5) Package and Deploy
8/19
Instructor Exercises Guide
Course materials may not be reproduced in whole or in part
without the prior written permission of IBM.
13-8 Developing Web Applications Copyright IBM Corp. 2004, 2007
13.3. Package the EAR File
__ 5. Export the LibraryEAR project as library.ear file.
__ a. In the Project Explorer view, right-click LibraryEAR, and select Prepare for
Deployment.
__ b. In the Project Explorer view, right-click LibraryEAR, and select Export EAR
file.
__ c. In the EAR Export dialog, select LibraryEAR as the EAR application, and
browse to \Deploy\exports\library.ear for the Destination.
__ d. Click Finish.
__ e. You should now be able to locate the library.ear file in the
\Deploy\exports directory.
-
7/28/2019 Lab-5) Package and Deploy
9/19
Instructor Exercises Guide
Course materials may not be reproduced in whole or in part
without the prior written permission of IBM.
Copyright IBM Corp. 2004, 2007 Exercise 13. Package and Deploy a J2EE Application 13-9
.
EXempty 13.4. Start the server and Administrative Console
__ 6. Remove projects from the server.
__ a. In the Servers view, expand WebSphere Application Server v6.1, right-click
LibraryEAR, and select Remove.__ b. Click OK in the confirmation dialog.
__ 7. Start the server.
__ a. In the Servers view, right-click WebSphere Application Server V6.1, and select
Start.
__ b. Switch to the Servers view and wait for the server status to change to Started.
__ 8. Start administrative console.
__ a. Right-click WebSphere Application Server V6.1 from the Servers view, then
select Run administrative console to load the administrative console in a Webbrowser.
__ b. Type admin in the User ID field, and click Log in.
-
7/28/2019 Lab-5) Package and Deploy
10/19
Instructor Exercises Guide
Course materials may not be reproduced in whole or in part
without the prior written permission of IBM.
13-10 Developing Web Applications Copyright IBM Corp. 2004, 2007
13.5. Install the Enterprise Application
__ 9. Install Library Enterprise Application to the application server (server1).
__ a. In the Admin Console, expand Applications in the left navigation, and click
Install New Application.
__ b. In the Preparing for the application installation page, select Local file
system and click Browse. Navigate to the \deploy\exports
directory where the library.ear was saved in the previous step. Select
library.ear and click Open. The Local file system field should now contain the
path of the EAR file.
__ c. Click Next.
__ d. The next page will show Step 1: Select installation options. On the left side
menu, notice that there are three steps to complete. You can complete each step
-
7/28/2019 Lab-5) Package and Deploy
11/19
Instructor Exercises Guide
Course materials may not be reproduced in whole or in part
without the prior written permission of IBM.
Copyright IBM Corp. 2004, 2007 Exercise 13. Package and Deploy a J2EE Application 13-11
.
EXempty in turn and press Next to navigate to the next step, or you can jump directly to a
step by clicking on its link.
__ e. In Step 1, select the check box to enable Pre-compile JSP. This operation takes
a little while to complete, but is an excellent option to select when testing. This
way you can ensure that all JSPs will compile. In production, this is a way to
-
7/28/2019 Lab-5) Package and Deploy
12/19
Instructor Exercises Guide
Course materials may not be reproduced in whole or in part
without the prior written permission of IBM.
13-12 Developing Web Applications Copyright IBM Corp. 2004, 2007
reduce the response time for the first request of a JSP page. Change the
Application nameto LibraryApplication. Click Next.
__ f. Step 2 will now be displayed. Notice that Step 1 is still listed as a hyperlink,
allowing you to return to any previous step. Step 2 allows you to map modules
-
7/28/2019 Lab-5) Package and Deploy
13/19
Instructor Exercises Guide
Course materials may not be reproduced in whole or in part
without the prior written permission of IBM.
Copyright IBM Corp. 2004, 2007 Exercise 13. Package and Deploy a J2EE Application 13-13
.
EXempty that are contained in your application. You have only one module, LibraryWeb,
which has already been configured to deploy to server1. Click Next.
__ g. Step 3 displays a summary of the configurations set in the previous steps. Verifythe information, then click Finish.
__ h. You should see a page headed Installing, and messages will scroll down to
indicate the progress of the installation. The application server will step through
-
7/28/2019 Lab-5) Package and Deploy
14/19
Instructor Exercises Guide
Course materials may not be reproduced in whole or in part
without the prior written permission of IBM.
13-14 Developing Web Applications Copyright IBM Corp. 2004, 2007
the module to performing installation tasks. Look for the following message to
confirm that the enterprise application was successfully installed.
-
7/28/2019 Lab-5) Package and Deploy
15/19
Instructor Exercises Guide
Course materials may not be reproduced in whole or in part
without the prior written permission of IBM.
Copyright IBM Corp. 2004, 2007 Exercise 13. Package and Deploy a J2EE Application 13-15
.
EXempty 13.6. Start the Enterprise Application
Before you can test the application, you must start the LibraryApplication.
__ 10. Start the Library enterprise application.
__ a. In the Admin Console, expand Applications, and click EnterpriseApplications. The page displayed in the workspace lists the enterprise
applications installed, and indicates whether they are started or stopped.
__ b. Select the check-box next to LibraryApplication and Click Start. This will
attempt to start the LibraryApplication enterprise application.
__ c. Once completed, look for a message at the top of the screen indicating that
LibraryApplication started successfully.
__ d. Scroll down to the list of enterprise applications table, and you should also see
that LibraryApplication has a status of Started.
Note
If an error is reported, use the command prompt to change to the
\runtimes\base_v61\profiles\AppSrv01\logs\server1 directory and display
the contents of SystemOut.log. Scroll down to the bottom of the file to see the latest
messages. This should provide more information about the error. Verify that you followed
all of the above steps correctly, and try restarting the server if you still experience
problems.
-
7/28/2019 Lab-5) Package and Deploy
16/19
Instructor Exercises Guide
Course materials may not be reproduced in whole or in part
without the prior written permission of IBM.
13-16 Developing Web Applications Copyright IBM Corp. 2004, 2007
13.7. Test the Library Application
__ 11. Test the Servlet.
__ a. In the J2EE perspective, click the Web browser icon.
__ b. In the Web browser, enter the address http://localhost:9080/Library/List. A list
of all the patrons and their on loan items should be displayed.
__ 12. Test the JSP pages.
__ a. In the Web browser, specify the address
http://localhost:9080/Library/search.jsp.
-
7/28/2019 Lab-5) Package and Deploy
17/19
Instructor Exercises Guide
Course materials may not be reproduced in whole or in part
without the prior written permission of IBM.
Copyright IBM Corp. 2004, 2007 Exercise 13. Package and Deploy a J2EE Application 13-17
.
EXempty __ b. Type 4 in Search Phrase, select Patron ID, and click Search.
__ c. The list of items for that patron should be displayed.
__ 13. Test the Struts pages.
__ a. Type http://localhost:9080/Library/login.jsp in the browser
address to go to a login page.
__ b. Type 2 in User ID and vogel in Password, then click Login.
-
7/28/2019 Lab-5) Package and Deploy
18/19
Instructor Exercises Guide
Course materials may not be reproduced in whole or in part
without the prior written permission of IBM.
13-18 Developing Web Applications Copyright IBM Corp. 2004, 2007
__ c. The following page should show upon a successful login.
__ 14. Test the JSF pages.
__ a. Type http://localhost:9080/Library/faces/register.jsp in the
browser address to load the Register A New Patron page.
__ b. Enter the following information, then click Register.
- First Name: Jimmy
- Last Name:World
- Email: [email protected]
- Password: donuts
__ c. The registration successful page should now show, with a random ID generated
for the patron.
-
7/28/2019 Lab-5) Package and Deploy
19/19
Instructor Exercises Guide
Course materials may not be reproduced in whole or in part
without the prior written permission of IBM.
Copyright IBM Corp. 2004, 2007 Exercise 13. Package and Deploy a J2EE Application 13-19
.
EXempty END OF LAB