L32HDTV Manual 11206 Web

8/2/2019 L32HDTV Manual 11206 Web

1/81

www.vizioce.com

LIQUID CRYSTAL HDTV

L32 HDTV


2/81


3/81

www.VIZIOCE.comVrsion- 11/29/05

VIZIO L2 HDTV Usr Manual

Dear VIZIO Customer,

Conratulations on our nw VIZIO L2 Hih

Dnition LCD Tlvision purchas. Thank ou or our

support. For maximum nt o our st, plas rad

ths instructions or makin an adjustmnts, and

rtain thm or utur rrnc. W hop ou will

xprinc ars o njomnt rom our nw VIZIOL2 Hih Dnition Tlvision.

For assistance, plas call 714-668-0588 or mail

us at [email protected].

To purchas or inquir aout accssoris and instal-

lation srvics or our VIZIO LCD TV, plas visit

our wsit at www.vizioc.com or call toll r at

1-888-VIZIOCE (1-888-849-4623).

W rcommnd ou ristr our VIZIO L2 HDTVithr at our wsit www.vizioc.com or ll in our

ristration card and mail it in. For pac o mind and

to protct our invstmnt ond th standard war-

rant, VIZIO ors on-sit xtndd warrant srvic

plans. Ths plans iv ou additional covra durin

th standard warrant priod. Visit our wsit or call

us to purchas a plan.

Writ down our Srial Numr locatd on th ack

o our L2.

Purchas Dat _________________

___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___A S L


4/81


4


This product is dsind and manuacturd to oprat within dnd dsin limits, and misus ma

rsult in lctric shock or r. To prvnt th product rom in damad, th ollowin ruls should

osrvd or th installation, us and maintnanc o th product. Rad th ollowin sat instructions

or opratin th displa. Kp ths instructions in a sa plac or utur rrnc.

To avoid th risk o lctric shock or componnt dama, switch o th powr or connctin othr componnts to th LCD TV.

Unplu th powr cord or clanin th LCD TV. A damp cloth is sucint or clanin th LCD TV. Do not us a liquid or a spra clanr

or clanin th product. Do not us arasiv clanrs.

Alwas us th accssoris rcommndd VIZIO to insur compatiilit.

Whn movin th LCD TV rom an ara o low tmpratur to an ara o hih tmpratur, condnsation ma orm on th housin. Do not

turn on th LCD TV immdiatl atr this to avoid causin r, lctric shock or componnt dama.

Do not plac th LCD TV on an unstal cart, stand, or tal. I th LCD TV alls, it can injur a prson and caus srious dama to th

applianc.

A distanc o at last t should maintaind twn th LCD TV and an hat sourc, i.. radiator, hatr, ovn, amplir tc. Do not

install th product clos to smok. Opratin th product clos to smok or moistur ma caus r or lctric shock.

Slots and opnins in th ack and ottom o th caint ar providd or vntilation. To nsur rlial opration o th LCD TV and

to protct it rom ovrhatin, sur ths opnins ar not lockd or covrd. Do not plac th LCD TV in a ookcas or caint unlss

propr vntilation is providd.

Nvr push an ojct into th slot on th LCD TV caint. Do not plac an ojcts on th top o th product. It could short circuit parts

causin a r or lctric shock. Nvr spill liquids on th LCD TV.

Th LCD TV should opratd onl rom th tp o powr sourc indicatd on th lal. I ou ar not sur o th tp o powr supplid to

our hom, consult our local powr compan.

Th powr cal must rplacd whn usin dirnt volta rom that spcid in th Usr Manual. For mor inormation, contact VIZIO.

Th LCD TV is quippd with a thr-prond roundd plu, a plu with a third (roundin) pin. This plu will t onl into a roundd powr

outlt as a sat atur. I our outlt dos not accommodat th thr-wir plu, hav an lctrician install th corrct outlt, or us an

adaptr to round th applianc sal. Do not dat th sat purpos o th roundd plu.

Do not ovrload powr strips and xtnsion cords. Ovrloadin can rsult in r or lctric shock.

Th wall sockt should installd nar th quipmnt and should asil accssil.

Do not touch th powr cord durin lihtnin. To avoid lctric shock, avoid handlin th powr cord durin lctrical storms.

Unplu th unit durin a lihtnin storm or whn it will not usd or lon priod o tim. This will protct th LCD TV rom dama du

to powr surs.

Do not attmpt to rpair or srvic th product oursl. Opnin or rmovin th ack covr ma xpos ou to hih voltas, th risk o

lctric shock, and othr hazards. I rpair is rquird, plas contact VIZIO and rr all srvicin to qualid srvic prsonnl.

Kp th product awa rom moistur. Do not xpos this applianc to rain or moistur. I watr pntrats into th product, unplu th

powr cord and contact VIZIO. Continuous us in this cas ma rsult in r or lctric shock.

Do not us th product i an anormalit occurs. I an smok or odor coms apparnt, unplu th powr cord and contact VIZIO

immdiatl. Do not tr to rpair th product oursl.

Avoid usin droppd or damad appliancs. I th product is droppd and th housin is damad, th intrnal componnts ma unction

anormall. Unplu th powr cord immdiatl and contact VIZIO or rpair. Continud us o th product ma caus r or lctric

shock.

Do not install th product in an ara with hav dust or hih humidit. Opratin th product in nvironmnts with hav dust or hih

humidit ma caus r or lctric shock.

Hold th powr connctor whn rmovin th powr cal. Pullin th powr cal itsl ma dama th wirs insid th cal and caus

r or lctric shock. Whn th product will not usd or an xtndd priod o tim, unplu th powr connctor.

To avoid risk o lctric shock, do not touch th connctor with wt hands.

Insrt attris in accordanc with instructions whil usin th rmot control. Incorrct polaritis ma caus dama and laka o th

attris, oprator injur and contamination o th rmot control.

I an o th ollowin occurs, plas contact VIZIO:

Th powr connctor ails or ras.

Liquid spras or an ojct drops into th LCD TV.

Th Displa is xposd to rain or othr moistur.

Th Displa is droppd or damad in an wa.

Th prormanc o th Displa chans sustantiall.

Opratin nvironmnt: Tmpratur: 40F ~ 95F, Humidit: 10% to 90% non-condnsin, Altitud: 0~10,000 t.

THIS PRODUCT HAS beeN TeSTeD AND FOUND TO COMPLy WITH RegULATORy SAFeTy CeRTIFICATIONS.


5/81


5


Note: In som countris or rions, th shap o th powr plu and powr outlt ma somtims dir

rom that shown in th xplanator drawins. Howvr, th mthod o connctin and opratin th unit

is th sam.

Television Antenna Connection Protection

External Television Antenna Grounding

I an outsid antnna/satllit or cal sstm is to connctd to th LCD TV, mak sur that th

antnna/satllit or cal sstm is lctricall roundd to provid som protction aainst volta surs

and static chars.

Articl 810 o th National elctrical Cod, ANSI/NFPSA 70, provids inormation with rard to propr

roundin o th mast and supportin structur, roundin o th lad-in wir to an antnna dischar unit,

siz o th roundin conductors, location o antnna dischar unit, connction to roundin lctrods,

and rquirmnts o th roundin lctrod.

Lightning Protection

For addd protction o our LCD TV durin a lihtnin storm or whn it is lt unattndd or unusd or

lon priods o tim, unplu th LCD TV rom th wall outlt and disconnct th antnna/satllit or cal

sstm.

Power Lines

Do not locat th antnna nar ovrhad liht or powr circuits, or whr it could all into such powr lins

or circuits.

eLeCTRIC SeRVICe eQUIPMeNT

gROUND CLAMP

gROUND CLAMPS

ANTeNNA LeAD-IN WIRe

ANTeNNA DISCHARge UNIT (NeC SeCTION 810-20)

gROUNDINg CONDUCTORS (NeC SeCTION 810-21)

POWeR SeRVICe gROUNDINg eLeCTRODe SySTeM (NeC ART 250, PART H)


6/81


6


Opening the Package

your VIZIO L2 HDTV is packad in a carton tothr with othr standard accssoris. An optional

accssoris would packd sparatl in anothr carton.

Th wiht o th LCD displa is approximatl 4 ls. Du to th siz and wiht o th product, it is

sustd that it handld a minimum o 2 prsons.

Sinc th lass can asil scratchd or rokn, plas handl th product ntl. Nvr plac th unit ona surac with th lass acin downwards unlss it is on protctiv paddin.

Whn opnin th carton, chck that th product is in ood condition and that all standard accssoris and

itms ar includd.

IMPORTANT: Sav th oriinal ox and all th packin matrial or utur shippin nds.

Package Contents

VIZIO L2 HDTV

VIZIO Rmot Control Univrsal elctronics

Audio Vido Cal (llow, rd and whit connctors)

Powr Cord

This Usr guid

Quick Stup guid

Ristration Card

VIP Srvics brochur

Not: Optional componnts sold sparatl.


7/81


7


Additional VIZIO Certied Accessories for the VIZIO L32

HDTV are sold separately:

Wall Mounts

Hih Dnition Cals

extra or rplacmnt Rmot

VIZIO also ors Installation Srvics and extndd Warrant Srvics or our VIZIO L2 HDTV.

To purchas or inquir aout additional accssoris and srvics or our VIZIO product, visit our w sit

at www.vizioc.com or call us toll r at 1-888-VIZIOCe (1-888-849-462).

Installation Preparation

Plas rad th usr manual carull or prormin th installation.

Th powr consumption o th displa is approximatl 160 watts, plas us th powr cord dsinatd or

th product. Whn an xtnsion cord is rquird, us on with th corrct powr ratin. Th cord must

roundd and th roundin atur must not datd.

Th product should installd on a fat surac to avoid tippin. Spac should maintaind twn

th ack o th product and th wall or propr vntilation. I ou would lik to mount th TV to th wall,

plas s Prparin th LCD or Wall Mountin low or additional inormation. Avoid

installin th product in th kitchn, athroom or othr placs with hih humidit, dust or smok, so as not

to shortn th srvic li o th lctronic componnts.

Plas nsur th product is installd with th scrn in landscap orintation. An 90 clockwis or

countrclockwis installation ma induc poor vntilation and xcssiv componnt dama.

VIZIO ors prossional installation srvics. Plas contact VIZIO or mor inormation on ths

srvics at 1-888-VIZIOCe (1-888-849-462) or www.vizioce.com.

Preparing Your LCD TV for Wall Mounting

Th VIZIO L2 HDTV can ithr kpt on th stand as or mountd to th wall or viwin. I ou

choos to mount th L2 HDTV to th wall, plas ollow th instructions low or rmovin th as

stand.


8/81


8


To remove the stand base:

1. Unplu all th cals and cords rom our LCD TV.

2. Plac th LCD TV ac down on a sot and fat surac (lankt, oam,

cloth, tc) to prvnt an dama to th displa.

. Rmov th 6 scrws on th ack panl o th TV locatd nar th ottom

so that th as stand can rmovd. (s Fiur .a)

4. gntl pull th stand awa rom th displa raspin rml to th as.

5. Now th displa can t scurl to a mount (sold sparatl) utilizin th

mountin hols in th cntr o th ack panl o th displa (s Fiur

.). Plas mak sur to rad th dirctions o our spcic wall mount to

proprl han th L2 HDTV. Mak sur th wall mount is ratd to support

at last 65 ls.

To nd th prct mount or th VIZIO L2 HDTV,

rows VIZIOs crtid mount slction at www.vizioce.com

or call dirctl, 1-888-VIZIOCe (1-888-849-462).

Figure 3.3b

Figure 3.3a


9/81


9


Chapter 1 Basic Controls and Connections1.1 Front Panl Controls 101.2 Sid Panl Controls 101. Rar Panl Connctions 11

1.4 VIZIO Univrsal Rmot Control 121.4.1 Insrtion o battris in th Rmot Control 151.4.2 Rmot Control Ran 15

1.4. Prcautions or th VIZIO Univrsal Rmot Control 15

Chapter 2: Connecting Equipment2.1 Which Vido Connction Should I Us? 162.2 Connctin our DVD Plar 17

2.2.1 Usin HDMI (Diital HD) 172.2.2 Usin Componnt (Analo HD1) Vido 19

2.2. Usin S-Vido (AV) 202.2.4 Usin Composit (AV) Vido 21

2. Connctin your HDTV St-Top box 22

2..1 Usin HDMI (Diital HD) 222..2 Usin Rgb Vido 24

2.4 Connctin your VCR or Vido Camra 25

2.5 Connctin Coaxial (RF) 262.5.1 Usin yourAntnna or Diital Cal or DTV 262.5.2 Usin your Antnna or Cal TV 27

2.5. Usin th Antnna throuh your VCR 272.6 Connctin an Amplir or Spakrs 28

2.7 Connctin a Computr 29Chapter 3: Setting Up to Watch TV and DTV

.1 basic LCD TV Start Up 0.2 Watchin a TV Proram 2

. Adjustin basic LCD TV Sttins 2.4 DTV Tunr St Up

.4.1 Parntal Controls or DTV 40

.4.2 DTV Channl Inormation 42.4. Proram Inormation 4.4.4 Sttin a Password 44

.5 Usin th On Scrn Displa (OSD) 45.5.1 OSD Mnu Oprations 45.5.2 Pictur Adjust 46

.5. Pictur 46.5.4 Tmpratur 47.5.5 Audio Adjust 47

.5.6 TV Tunr St Up or NTSC TV 47

.5.7 Parntal Controls or TV 48.5.8 PIP/POP St Up 48

.5.9 Spcial Faturs 48.5.10 Undrstandin Viwin Faturs 49.5.11 Viwin Mods 49

.5.12 Pictur in Pictur (PIP)/Pictur Pictur (POP) Mod 50.5.1 Adjust basic PIP/POP Sttins 50.5.14 Usin th Parntal Controls 51

.5.15 Sttin th Slp Timr 52.6 Prorammin th VIZIO Univrsal Rmot Control 5

.6.1 Prorammin or VCR 5

.6.2 Prorammin or Cal box 54.6. Prorammin or DVD Plar 54.6.4 Sarchin or Componnt Cods 55

.7 Usin a Cal box or Satllit box Rmot 55

Chapter 4: Maintenance and Troubleshooting4.1 Maintnanc 56

4.2 Troulshootin guid 564. Tlphon and Tchnical Support 584.4 Complianc 59

4.5 FCC Class b Radio Frqunc Intrrnc Statmnt 59

Specications 60

Glossary Standard Denitions 61

Index 62

Appendix A: Limited Product Warranty 64

Appendix B: Component Program Codes 65

Table Of ContentsPage


10/81


11/81


11


1.3 - Rear Panel Connections

1. Srvic This custom communication port is or actor srvic onl.

2. AC IN Plu-in th supplid AC Powr Cord hr.

. DIGITAL HD (HDMI) - Connct a DVD multimdia plar, or st-top ox and th audio throuh

this connction. Th whit color and on th ack o th displa indicats this connction. For usrs

who want to connct a DVI nald dvic, us an HDMI-DVI cal (availal or purchas rom www.vizioc.com or callin 1-888-VIZIOCe [1-888-849-462]) and us th Analo Audio output o th

dvic connctd to th L+R Audio hr.

4. RGB (Analg RGB/Adi In) - Connct th vido and th audio rom a computr or st-top ox hr.

Th purpl color and on th ack o th displa indicats this connction.

5. CoMpoNeNT ANALoG HD1 (Cmnnt Y-pb/Cb-pr/Cr with Adi L/R) - Connct th primar

sourc or componnt vido, such as a DVD plar or st-top ox hr. From lt to riht, us th

rn or y, lu or Pu (or Co), rd or Pr (or Cr), whit or lt audio and rd or riht audio inputs.

Th rn color and on th ack o th displa indicats this connction.

6. CoMpoNeNT ANALoG HD2 (Cmnnt Y-pb/Cb-pr/Cr with Adi L/R) - Connct th scondar

sourc or componnt vido, such as a DVD plar or st-top ox hr. From lt to riht, us th rn

or y, lu or P (or C), rd or Pr (or Cr), whit or lt audio and rd or riht audio inputs. Thlu color and on th ack o th displa indicats this connction.

7. AV1 In Connct th primar sourc or composit dvics, such as a VCR or vido am. Us th

whit and rd connctors to connct th xtrnal audio rom th sam sourc. Th llow color and on

th ack o th displa indicats this connction.

8. AV2 In Connct th scondar sourc or composit dvics, such as a VCR or vido am. Us th

whit and rd connctors to connct th xtrnal audio rom th sam sourc. Th oran color and on

th ack o th displa indicats this connction.

9. Adi ot - Connct th audio rom th LCD TV to an xtrnal dvic, such as an xtrnal amplir or

stro. Spakrs cannot connctd dirctl to hr.

10. TV - Connct to an antnna, or cal srvic or standard NTSC srvic.

11. DTV Connct to an antnna or diital cal or Diital TV.*12. DIGITAL AuDIo ouT Whn th DTV input is slctd or viwin, th diital audio associatd with

Diital prorammin will availal on this output or connction to our hom thatr sstm.

* For diital TV stations in our ara visit www.antnnaw.or.

HDMI loo and Hih-Dnition Multimdia Intrac ar ristrd tradmarks o HDMI Licnsin LLC.

1 3

2

4 5 7 9

6 12 8 11 10


12/81


12


1.4 - VIZIO Universal Remote Control

Th VIZIO Rmot is a comprhnsiv rmot that can usd to control up to our dirnt componnts.

Th rmot control utton unctions ar xplaind on th ollowin pas.

VIZIo Rmt Cntrl Bttn Dscritin

SeT This utton starts all prorammin squncs.

Rmot LeD blinks whn th rmot is in

prorammd or is sndin a sinal to our TV.

POWeR Prss this k to turn th TV on rom stand

mod. Prss it aain to rturn to th stand mod.

TV This utton slcts a prorammd TV. Not: this

utton has n pr-prorammd or th VIZIO L2

HDTV.

VCR This utton slcts a prorammd VCR.

CAbLe This utton slcts a prorammd cal TV st-

top ox or slcts a prorammd satllit TV st-top ox.

DVD This utton slcts a prorammd DVD plar.

Numr button Pad Us ths uttons to slct a

channl or ntr a password.

INPUT This utton allows th usr to ccl throuh th

input sourcs.

eNTeR This utton works as a Dot or Dash utton in th

DTV mods. Whn slctin a diital channl dirctl

us this utton or th sparation o main and su-

channls. For xampl, channl 28.2 would

2-8-eNTeR-2.

CH (+ or -) Ths uttons chan th channls up or

down.

LAST This utton rcalls th prviousl viwd channl.

MUTe This utton turns th sound on and o.

VOL (+ or -) Ths uttons turn volum up or down.

MeNU This utton is usd to turn th OSD on.

INFO This utton displas th ima and sstm inor-

mation displa.

gUIDe This utton displas proram inormation.

Not: this utton is onl unctional or DTV.

eXIT This utton xits th OSD mnus.

Ths uttons naviat th On-Scrn Displa

(OSD) mnus.

OK This utton works to slct our chosn option in

On-Scrn Displa (OSD) mnus.


13/81


1


WIDe/Rcord This utton ccls throuh standard and

widscrn viwin mods. Options includ Normal, Wid

and Zoom. Not: in Rgb mod, th onl option is Wid.

This utton also unctions as a VCR Rcord whn th

componnt is activatd with th rmot control.

SLeeP/Paus - This utton allows th usr to slct th

slp options adjustin th timr in 0 minut

incrmnts up to 120 minuts. Additionall, this

utton pauss th CD, DVD or VCR whn th componnt

is activatd with th rmot control.

MTS/Pla This utton will slct th MTS options in

th NTSC TV mod. Options includ: Stro, SAP or

Mono. Additionall, this utton plas th CD, DVD or

VCR whn th componnt is activatd with th rmot

control.

CC/Stop This utton will slct th Closd Caption mnuin th TV mod. Options includ th ollowin: OFF, CC1,

CC2, CC, CC4, TT1, TT2, TT or TT4. Additionall, this

utton stops th CD, DVD or VCR whn th componnt is

activatd with th rmot control.

NTSC TV/Skip Channl Rvrs - This utton slcts

NTSC TV prorammin. Not: this utton has n

pr-prorammd or th VIZIO L2 HDTV. This utton

also unctions as a DVD skip channl rvrs whn th

DVD plar is activatd with th rmot control.

AV/Rvrs Rpatd prssin o this utton will ccl

throuh AV1, AV2 and AV inputs. Additionall, thisutton rwinds th CD, DVD or VCR whn th componnt

is activatd with th rmot control.

ANALOg HD/Forward Rpatd prssin o this utton

will switch twn Componnt Analo HD1 and

Componnt Analo HD2 componnt inputs. Additionall,

this utton orwards th CD, DVD or VCR whn th

componnt is activatd with th rmot control.

DIgITAL HD/Skip Channl Forward Rpatd prssin

o this utton will switch twn th Diital HD input

and DTV mod. Additionall, this utton unctions as a

DVD skip channl orward whn th componnt isactivatd with th rmot control.


14/81


14


ZOOM (- and +) Us this k to zoom th ima 2x or

shrink th ima on hal. Whn in ZOOM mod, a 2x

or 1/2x will appar in th top riht ara o th scrn.

Us th arrow ks to mov th zoomd portion. Prss

th OK or Zoom (-) utton to rturn to th standard

pictur.

FReeZe Prss this k to Frz-Fram th currnt

scrn. Usrs ma prss this k aain to continu

plain. Not: normal viwin will rsum automaticall

atr on minut.

Rgb This utton slcts a connctd Rgb Analo

componnt such as a PC.

PIP Us this utton to activat th Pictur-In-Pictur

mod.

PIP CH ( and +) Ths uttons ar usd to slct th

channls within th PIP scrn whn TV is th inputslctd.

AUDIO Prss this k to switch th audio rom th main

scrn to th su-scrn whil in PIP or POP mod.

PIP Input Prss this utton to choos th PIP input

rom th OSD mnu. Choos rom on o th ollowin:

AV1, AV2, AV, Componnt Analo HD1, Componnt

Analo HD2, Diital HD, Rgb, TV and DTV.

Not: Usrs must in PIP mod or this utton to

unctional. For additional inormation rardin th PIP

options, s .5.8 - Pictur-in-Pictur (PIP) Mod,

pa 48.

PIP Siz Prss this utton to slct th siz o th PIP

scrn rom on o th ollowin: small, mdium or lar.

LANg This utton is not unctional or th VIZIO L2

HDTV.

Swap Usd to swap th inputs rom th main scrn and

th su-scrn whil in th PIP mod.

Not: Th rmot control laout is or rrnc onl.


15/81


16/81


16


Chapter 2 - Connecting Equipment

2.1 - Which Video Connection Should I Use?

Th VIZIO L2 HDTV has six dirnt was to connct our vido quipmnt rom a asic connction to

th most advancd or diital displas.

Not: For mor ino rr to th Quick Start guid

Connection

Quality(type)

Connector

Color

Codes

for

Rear Panel

Description

Analo HD1/HD2 (Componnt) - Th vido

sinal is sparatd into thr sinals, on

containin th lack-and-whit inormation

and th othr two containin th color

inormation. This nhancmnt ovr S-Vidotaks advanta o th suprior pictur

providd prorssiv scan DVD plars and

HDTV ormats.

Diital HD (HDMI - Hih-Dinition Multim-

dia Intrac) - It is th irst and onl

industr-supportd, uncomprssd, all-diital

audio/vido intrac. HDMI provids an

intrac twn an audio/vido sourc, such

as a st-top ox, DVD plar, or A/V rcivr

and an audio and/or vido monitor, such as a

diital tlvision (DTV), ovr a sinl cal.

black

grn and

blu

bttr

(analo)

bst

(diital)

bst

(analo)

TV Coaxial RF. This is th connction or

standard NTSC TV usin antnna or cal. I

ou hav a VCR, ou can connct our

antnna/cal to th VCR RF Input and

connct th VCR RF Output to this connctor.

S-Vido (AV) - Th vido sinal is sparatd

into two sinals, on containin th lack-

and-whit inormation and th othr containin

th color inormation. Sparatin th color in

this wa avoids cross color cts whr

closl spacd lack and whit lins ar

rronousl displad in color. It also nals

txt to displad mor sharpl.

DTV Coaxial RF. Whn usd or MPeg2

ncodd it strams rom ATSC roadcast

prorammin, this input taks advanta o th

Hih Dinition contnt.

AV1/AV2/AV (Composit) - Th complt

vido sinal is carrid throuh this sinl pin

connctor. This is th most commonl usdvido connction.

Analo Rgb (VgA) - This vido input has

sprat rd, rn and lu color componnts.

Th sinal carris horizontal and vrtical snc

inormation on th rn sinal. This is most

commonl usd or PC input

black

yllow and

Oran

Sid Panl

good

(analo)Riht

good

(analo)

good

(analo)

black

Purpl

bst

(diital)Lt


17/81


17


2.2 - Connecting Your DVD Player

you hav svral options or connctin our DVD plar to our nw L2 HDTV HDMI (Diital HD),

Componnt (Analo HD), S-Vido (AV), and Composit (AV) inputs. basd on our hom thatr conu-

ration, ou can dcid which option is th riht on or ou.

2.2.1 - Using HDMI (Digital HD)

DVD plars that hav a diital intrac such as HDMI (Hih-Dnition Multimdia Intrac) should

connctd to th HDMI input o th VIZIO L2 HDTV or optimal rsults.

Connecting DVD Player (Best):

1. Turn o th powr to th LCD TV and DVD plar.

2. Connct a HDMI cal to th HDMI output o our DVD plar and th othr nd to th HDMI input

(whit color ara) in th rar o our LCD TV.

. Turn on th powr to th LCD TV and our DVD plar.

4. Slct Diital HD usin th INPUT utton on th ront o th LCD TV or dirctl prssin th DiitalHD utton on th Rmot Control.

Not: To maintain th displa qualit, us a VIZIO crtid HDMI cal availal up to 10 mtrs or lss.

S www.VIZIOCe.com or call 1-888-VIZIOCe (1-888-849-462) or dtails.

Not: Rr to our DVD plar usr manual or mor inormation aout th vido output rquirmnts

o th product.


18/81


18


For DVD Players with DVI:


2. Usin a HDMI-DVI cal, connct th DVI nd to our DVD Plar and th HDMI nd to th HDMI

input (locatd in th whit ara) in th rar o our LCD TV.

. Usin an audio cal (whit and rd connctors), connct cal to th audio output connctrs

associatd with th DVI output on th rar o our DVD Plar, and connct th othr nd to th audio

connctors (whit ara) associatd with th HDMI input in th rar o our LCD TV.

4. Turn on th powr to th LCD TV and our DVD Plar.

5. Slct diital HD usin th input utton on th ront o th LCD TV or dirctl prssin th diital HD

utton on th rmot control.


19/81


19


2.2.2 - Using Component (Analog HD1) Video

Connecting DVD Player (Better):


2. Usin th connctors in th rn color ara, connct th y (rn color) connctor on th rar o our

DVD plar to th corrspondin y (rn color) connctor in th Componnt Analo HD1 roup (rn

color and) in th rar o our LCD TV.

. Connct th P (lu color) connctor on th rar o our DVD plar to th corrspondin P (lu

color) connctor in Componnt Analo HD1 roup (rn color and) in th rar o our LCD TV.

4. Connct th Pr (rd color) connctor on th rar o our DVD plar to th corrspondin Pr (rd color)

connctor in th Componnt Analo HD1 roup (rn color and) in th rar o our LCD TV.

5. Connct th R (rd color) and L (whit color) audio connctors on th rar o our DVD plar to th R

(rd color) and L (whit color) audio input connctors in th Componnt Analo HD1 roup (rn color

and) in th rar o our LCD TV.

6. Turn on th powr to th LCD TV and DVD plar.

7. Slct Componnt Analo HD1 usin th INPUT utton on th rmot or ront o th LCD TV or dirctl

prssin th Componnt Analo HD utton on th Rmot Control.

Note:

a) I ou ar alrad usin th Componnt Analo HD1 input or anothr componnt, or ou do not

want to us th Componnt Analo HD1 input or th DVD plar, ou can connct th DVD plar

to th Componnt Analo HD2 connctions codd th lu color ara.

) Rr to our DVD plar usr manual or mor inormation aout th vido output rquirmnts

o th product.


20/81


20


2.2.3 - Using S-Video (AV3)

Connecting DVD Player (Good):


2. Connct th S-Vido jack on th rar o our DVD plar to th S-Vido jack in th AV In roup on th

sid o our LCD TV.

. Connct th R (rd color) and L (whit color) audio connctors on th rar o our DVD plar to th R

(rd color) and L (whit color) audio input connctors in th sid o our LCD TV.


5. Slct AV usin th INPUT utton on th rmot or ront o th LCD TV or dirctl prssin th AV

utton on th Rmot Control thr tims.

Note: Rr to our DVD plar usr manual or mor inormation aout th vido output rquirmnts

o th product.


21/81


21


2.2.4 - Using Composite (AV) Video

Connection DVD Player (Good):


2. Usin th connctors in th llow color ara, connct th Vido (llow color) connctor on th rar o

our DVD plar to th Vido connctor in th AV1 roup (llow color and) in th rar o our LCD TV.

. Connct th R (rd color) and L (whit color) audio connctors on th rar o our DVD plar to th R1

(rd color) and L1 (whit color) audio input connctors in th AV1 roup (llow color and) in th rar

o our LCD TV.


5. Slct AV1 usin th INPUT utton on th ront o our LCD TV or dirctl prssin th AV utton

on th Rmot Control.

Note:

a) I ou ar alrad usin th AV1 input or anothr componnt, or ou do not want to us th

AV1 input or th DVD plar, ou can connct th DVD plar to th AV2 in (oran color ara).

I ou ar usin AV2, thn plas mak sur ou connct th audio in th AV2 roup.

) Rr to our DVD plar usr manual or mor inormation aout th vido output rquirmnts

o th product.


22/81


22


2.3 - Connecting Your HDTV Set-Top Box

you hav svral options or connctin our HDTV St-Top box to our nw L2 HDTV: HDMI (Diital

HD) and Rgb inputs. basd on our hom thatr conuration, ou can dcid which option is th riht

on or ou.

2.3.1 - Using HDMI (Digital HD)

HDTV St-Top boxs that hav a diital intrac such as HDMI (Hih-Dnition Multimdia Intrac)

should connctd to th HDMI input o th VIZIO L2 HDTV or optimal rsults.

Connecting Set-Top Box (Best):

1. Turn o th powr to th LCD TV and HDTV St-Top box.

2. Connct a HDMI cal to th HDMI output o our HDTV St-Top box and th othr nd to th HDMI

input (whit color ara) in th rar o our LCD TV.

. Turn on th powr to th LCD TV and our HDTV St-Top box.

4. Slct Diital HD usin th INPUT utton on th ront o th LCD TV or dirctl prssin th Diital

HD utton on th Rmot Control.

Not: To maintain th displa qualit, us a VIZIO crtid HDMI cal that is 10 mtrs or lss. S

www.vizioc.com or call 1-888-VIZIOCe (1-888-849-462) or dtails.

Note:

a) Th HDMI input on our LCD TV supports Hih-andwidth Diital Contnt Protction (HDCP).

HDCP ncrpts th transmission twn th vido sourc and th diital displa or

addd scurit and protction.

) Rr to our HDTV St-Top box usr manual or mor inormation aout th vido output

rquirmnts o th product or consult our satllit or cal oprator.


23/81


2


For HDTV Set-Top Boxes with DVI:

1. Turn o th powr to th LCD TV and HDTV St-Top box.

2. Usin a HDMI-DVI cal, connct th DVI nd to our HDTV St-Top box and th HDMI nd to th

HDMI input (locatd in th whit ara) in th rar o our LCD TV.

. Usin an audio cal (whit and rd connctors), connct cal to th audio output connctors

associatd with th DVI output on th rar o our HDTV St-Top box, and connct th othr nd to th

audio connctors (whit ara) associatd with th HDMI input in th rar o our LCD TV.

4. Turn on th powr to th LCD TV and our HDTV St-Top box.

5. Slct diital HD usin th input utton on th ront o th LCD TV or dirctl prssin th diital HD

utton on th rmot control.


24/81


24


2.3.2 - Using RGB Video

Connecting Set-Top Box (Better):

1. Turn o th powr to our LCD TV and HDTV St-Top box.

2. Connct a 15-pin D-Su Rgb cal to th Rgb output o our HDTV St-Top box and th othr nd to

th Rgb input (purpl color ara) in th rar o our LCD TV.

. Connct th Audio Out on our HDTV St-Top box to th Audio within th Rgb roup (purpl color

ara) on our LCD TV.

4. Turn on th powr to our LCD TV and HDTV St-Top box.

5. Slct Rgb usin th INPUT utton on th ront o our LCD TV or dirctl prssin th Rgb utton

on th Rmot Control.

Note: Rr to our HDTV St-Top box usr manual or mor inormation aout th vido output



25/81


25


2.4 - Connecting Your VCR or Video Camera

1. Turn o th powr to our LCD TV and VCR or vido camra.2. Connct th S-Vido jack on our VCR or vido camra to th S-Vido jack on th sid o our LCD TV.

. Connct th R (rd color) and L (whit color) audio connctors on our VCR or vido camra to th R

(rd color) and L (whit color) audio input connctors on th sid o our LCD TV.

4. Turn on th powr to th LCD TV and VCR or vido camra.

5. Slct AV usin th INPUT utton on th ront o our LCD TV or dirctl prssin th AV utton

on th Rmot Control thr tims.

Note: Rr to our VCR or Vido Camra usr manual or mor inormation aout th vido output



26/81


26


2.5 - Connecting Coaxial (RF)

Thr ar svral options or connctin our antnna (or cal or TV) to our nw L2 HDTV - dirctl to

th DTV, NTSC TV or throuh our VCR. basd on our hom thatr conuration, ou can dcid which

option is th riht on or ou.

2.5.1 - Using Your Antenna or Digital cable for DTV

1. Turn o th powr to our LCD TV.

2. Connct th coaxial (RF) connctor rom our Antnna or Diital Cal to th DTV connctor on th

rar o our LCD TV.

. Turn on th powr to our LCD TV.

4. Slct DTV usin th INPUT utton on th ront o our LCD TV or dirctl prssin th Diital HD

utton on th Rmot Control twic.

Note:

a) Diital roadcasts ar not availal in all aras. Rr to www.antnnaw.or or dtaild

inormation.

) Mak sur th antnna is corrctl roundd.

c) For Prossional antnna installation contact VIZIO at www.VIZIOCe.com or

call (1-888-VIZIOCe) (1-888-849-462).


27/81


27


2.5.2 - Using Your Antenna or Cable TV

1. Turn o th powr to our LCD TV.

2. Connct th coaxial (RF) connctor rom our antnna, cal or cal ox to th TV connctor on th

rar o our LCD TV.

. Turn on th powr to our LCD TV.

4. Slct TV usin th INPUT utton on th ront o our LCD TV or dirctl prssin th NTSC TV

utton on th Rmot Control.

2.5.3 - Using the Antenna or Cable through Your VCR

1. Turn o th powr to our LCD TV and VCR.

2. Connct th Output to TV (RF Out or Antnna Out) connctor

on th rar o our VCR to th TV cal/Antnna connctor on th rar

o our LCD TV.

. Turn on th powr to our LCD TV and VCR.

4. Slct TV usin th INPUT utton on th rmot or ront o our LCD TV or

dirctl prssin th NTSC TV utton on th Rmot Control.

Note: I ou hav an o-air antnna or cal TV, connct th o-air antnna or TV cal to th RF

connctor on th rar o our VCR.


28/81


28


2.6 - Connecting an Amplier or Speakers

1. Turn o th powr to our LCD TV and Rcivr/Amp.

2. Connct th R (rd color) and L (whit color) audio connctors on th Rcivr/Amp to th R (rd color)

and L (whit color) audio output connctors in th rar

o our LCD TV.

. Turn on th powr to our LCD TV and Rcivr/Amp.

4. Thn prss th mnu utton on th rmot control to

opn th On-Scrn Displa (OSD) mnu.

5. Prss th on th rmot control to slct th Audio

Adjust mnu.

6. Prss th on th rmot control to slct

SPeAKeRS.

7. Prss th on th rmot control to slct OFF so that

th sound rom our VIZIO L2 LCD HDTV will now routd throuh our Rcivr/Amp sstm.

8. Rr to our Rcivr/Amp sstm manual to slct th corrspondin audio input.

Note: This audio output is not amplid and cannot connctd dirctl to xtrnal spakrs.

Note: I ou ar connctin th DTV input, ou can connct th SPDIF

DIgITAL AUDIO OUT to our sound sstm usin a diital optical

audio cal.


29/81


30/81


0


Chapter 3 Setting Up to Watch TV and DTV

For Prparin your LCD TV or Wall Mountin, s pa 7.

3.1 - Baisic LCD TV Start Up

1. Cnncting th pwr Cabl

Connct th powr cord to th powr cord connctor on th ack o our LCD TV, and thn plu th

powr cord into an AC wall sockt.

2. Cnnct Adi and Vid Cabls t th LCD TV

(s pas 16-29 or dtaild stps)

3. Trning pwr on

Onc all th componnts ar connctd, prss th Powr ON utton on th ront o th TV, or prss th

Powr ON (Rd) utton on th rmot control.

4. Slct Int Src

Slct th Input Sourc or our LCD TV prssin th INPUT utton on

th ront o th LCD TV or usin th Input utton on th rmot control.

Prssin this utton will ccl ou throuh th ollowin options: AV1, AV2

and AV (Vido), Componnt Analo HD1 and Componnt Analo HD2

(y-P/C-Pr/Cr), Diital HD (HDMI), Rgb (Analo Rgb), TV or DTV.

5. using rglar TV with an Antnna r Cabl

I connctin to antnna or cal sourc or th TV input, ou will nd to slct th appropriat sourc

within th On-Scrn Displa (OSD) mnu and Auto Scan or th availal TV channls.

Plas ollow th instructions low:

a. Slct th TV input prssin th INPUT utton on th ront o th TV or usin th INPUT utton

on th rmot control, or dirctl prssin th NTSC TV utton on th rmot control.

. Prss th MeNU utton on th rmot control to show th OSD mnu.

c. Prss th utton on th rmot control twic to hihliht th TV TUNeR SeTUP mnu.

Note: I ou do not s this option within th OSD, ou miht hav slctd th wron input in th

prvious stps and ou will nd to rpat stp 4 (aov) to slct anothr Input Sourc.


31/81


1


d. Prss utton twic to hihliht TV/Cal.

Us th utton to slct ithr TV or Cal.

TV sts th tunr or an antnna and Cal sts

th tunr or cal or a satllit dish.

. Onc slctd, prss th utton onc mor

to hihliht Auto Sarch to scan th availal

channls. Us th utton to start th sarch.

Not: This will tak a w minuts to complt.

. Prss th MeNU utton rpatdl to xit th

OSD.

. To add or dlt a channl prss to st channl. Us th or uttons to rotat to th

dsird channl numr and chan to ys or No undr skip channl sttin.

6. using DTV with an Antnna r Cabl

Whn connctin to an antnna or th DTV input, ou will nd to slct th DTV sourc within

th On-Scrn Displa (OSD) mnu and Auto Sarch or th availal TV channls. S Sc. .4.1.7

DTV Tunr Stup. Not: DTV diital roadcast is not availal in all aras. Rr to

www.antnnaw.or to t inormation aout availiilit in our ara, tp o antnna and which

dirction to point our antnna.

7. using a pC

I connctin to a PC throuh Rgb Analo input, st th TV timin mod to VeSA 1024 x 768 at 60Hz

or st pictur qualit (rr to th raphic cards usr uid or qustions on how to st this timin

mod).


32/81


2


3.2 - Watching a TV Program

bor ou start watchin TV, plas mak sur that an cal, satllit, or o-air antnna connctions

ar scur. Also, vri that th powr cord is plud into a corrctl roundd lctrical outlt or sur

protctor.

1. Prss th powr utton on th rmot or on th ront o our LCD TV. Th status LeD on th ront will

turn solid rn.

2. Thr ar 4 options or slctin our prorammin:

a. I ou ar usin an antnna or Diital cal connctd throuh th DTV input, ou can slct

DTV usin th INPUT utton on th ront o our LCD TV.

. I ou ar usin a cal st-top ox, satllit dish, or o-air antnna connctd throuh th TV/

Cal/Antnna input, ou can slct TV usin th INPUT utton on th ront o our LCD TV.

c. I ou ar watchin roadcasts throuh a cal st-top ox or satllit dish connctd HDMI,

slct Diital HD usin th INPUT utton on th ront o our TV.

d. I ou ar watchin a cal st-top ox or satllit dish connctd throuh th componnt inputs

(yPPr), slct Analo HD1 or Analo HD2 usin th INPUT utton on th ront o our LCD TV.

. Prss th Channl uttons on th rmot or th + /- uttons on th ront o our LCD TV to chan th

channl. Not: Th Channl uttons will not work i ou ar watchin a proram usin Diital HD,

Analo HD1, Analo HD2, AVI, AV2 or AV inputs.

3.3 - Adjusting Basic LCD TV Settings

Vlm

To incras th volum, prss and hold th VOL + utton on th ront panl or rmot control until th

dsird lvl is rachd.

To dcras th volum, prss and hold th VOL - utton on th ront panl or rmot control until th

dsird lvl is rachd.

TV Channls

To stp up throuh th availal TV channls, prss th CH + utton on th ront panl or rmot control

onc or th nxt channl or hold it dprssd until th dsird channl is rachd.

To stp down throuh th availal TV channls, prss th CH - utton on th ront panl or rmot control

onc or th prvious channl or hold it dprssd until th dsird channl is rachd. Not: Channl up

and down will onl oprat on TV and DTV mods.

Wid

Usin this atur, ou can watch vido contnt in dirnt siz mods on th TV. Prss th WIDe utton on

th rmot control to switch amon th mods.

For mor inormation s sction .5.10.

Note: you should al to s a pictur. I ou do not, mak sur that all connctions ar scur and

ou hav slctd th corrct vido input sourc.


33/81



3.4 DTV Tuner Setup

Prss th DIgITAL HD utton on th rmot until DTVappars on th top riht o th scrn. Whn th MeNU

utton is prssd, th On-Scrn Displa (OSD) appars on

th PICTURe ADJUST pa. Prss th RIgHT arrow

utton to hihliht th TV slction.

This will displa th DTV TUNeR SeTUP OSD.


34/81


4


Time Zone Sttin th corrct Tim Zon or our ara will

nsur that th corrct proram tims ar shown atr

prssin th guid utton on th rmot control.

Prss th DOWN arrow utton and th TIMe ZONe

cator is hihlihtd. Slct usin th or

arrow uttons. I nishd, us th eXIT utton to

rmov th OSD.

Slct CAbLe/AIR/AUTO to choos our DTV sourc. Slct

AUTO i ou ar not sur what tp o sourc ou ar usin.

Scan Automaticall scans or all o th diital TV channls

availal and stors th inormation in mmor.Prss th DOWN arrow utton to hihliht AUTO SCAN.

Prss th OK utton to activat. NOTE: This will tak svral

minuts to complt.

Onc Auto Scan has nishd, prss th exit utton to rturn

to th prvious mnu. NOTE: I ou prss OK, th Auto Scan

procss will start aain.

Note: you will not t as man Diital cal channls as our Stup box will hav. Th channls ou will

rciv ar clar QAM throuh our local cal providr.


35/81


5


Manual Scan I ou l that not all o th availal diital TV

channls wr ound with Auto Scan, thn slctin this option

maks th TV tr aain to nd an missin channls.

Prss th DOWN arrow to hihliht MANUAL SCAN and

thn prss th OK utton.

NOTE: A channl will missd i it is not transmittin at th

tim o th scan and so ou should tr aain at a tim whn ou

know th station is transmittin prorams.

A channl will also missd i it is too wak to rcivd. R-orintation o th antnna or

chanin to a hihr ain antnna ma hlp, ut not that an chans to th antnna ma act

th othr channls.

Th MANUAL SCAN scrn now appars and this can

usd in two was. Th scrn daults to ADD-ON MODe

and prssin th OK utton at this sta maks th TV scan

th whol channl ran aain. Prss eXIT to naviat awa

rom this scrn.

NOTE: I th OK utton is prssd, thn th automatic

scannin will start aain.

I th or utton is prssd rst, thn RANge MODe

is activatd so that th usr can spci a smallr ran o

channls th want scannd aain. Prss eXIT to naviat

awa rom this scrn.

NOTE: I th OK utton is prssd, thn th automaticscannin will start aain.


36/81


6


Channel Skip givs ou th option to skip channls whn

usin th Channl + or Channl - ks.

I ou did not eXIT rom th MANUAL SCAN, prss th

DOWN arrow utton aain to hihliht CHANNeL SKIP.

Prss th OK utton.

Th list o channls availal and stord in mmor is shown

on th scrn. I th list is lonr than 9 channls as ou

rpatdl prss th DOWN arrow , ou will al to

scroll throuh. Th oxs to th riht o th channl nams ar

mpt dault.

As ou scroll down th channls with th DOWN arrow ,

ach on is hihlihtd in turn. Whn a channl ou want to

skip is hihlihtd, prss th OK utton and a chck mark ( )

will appar in th ox opposit that channl. This mans that

whn surn with th CH+ or CH- uttons, this channl will skippd and not displad. Prss eXIT to naviat awa

rom this scrn whn nishd.


37/81


7


CLOSED CAPTION Allows ou to rad th voic contnt

o tlvision prorams.

Prss th DOWN arrow onc to hihliht th ANALOg

CLOSeD CAPTION option.


38/81


8


Us th and arrow uttons to slct th Analo Closd

Caption, usuall CC1. Prss eXIT to naviat awa rom this

scrn whn nishd.

Us th and arrow uttons to slct th Diital Closd

Caption, usuall SeRVICe1. Prss eXIT to naviat awa

rom this scrn whn nishd.


39/81


9


I ou did not eXIT rom th CLOSeD CAPTION pa,

prss th DOWN arrow to hihliht DIgITAL CAPTION

STyLe. Prss OK.

Th dault stl, AS bROADCASTeR, is shown as slctd.

This mans that th stl o th closd caption is as rcivd

rom th TV channl.

Us th or arrow utton to slct CUSTOM. Th

Custom pa allows ou chan th ont siz and color, th

ackround color, and th transparnc o th closd caption.

Prss eXIT to naviat awa rom this scrn whn nishd.


40/81


40


3.4.1 Parental Controls for DTV

Whn at th rst DTV scrn, prss th RIgHT arrow

utton twic.

Th PAReNTAL CONTROL scrn will shown.

Prss th OK utton to hihliht th ar.

entr th our diit password. Th actor dault password

is 0 0 0 0. I ou chan th password, plas mak a not

o it in a sa plac.


41/81


41


Onc th corrct password has n ntrd, th option or

lockin channls coms availal. Prss OK.

Th list o channls availal and stord in mmor is shownon th scrn. I th list is lonr than 9 channls as ou

rpatdl prss th DOWN arrow , ou will al to

scroll throuh th channls. Th oxs to th riht o th

channl nams ar mpt dault.

As ou scroll down th channls with th DOWN arrow ,ach on is hihlihtd in turn. Whn a channl ou want to

lock is hihlihtd, prss th OK utton and a chck mark

( ) will appar in th ox. This mans that whn this chan-

nl is slctd a password rqust ar will appar on th

scrn and ou will not al to viw th channl without

rst ntrin th corrct password. Prss eXIT to naviat

awa rom this scrn whn nishd.


42/81


42


3,4,2 DTV Channel Information

Whn a channl is slctd, an inormation

hadr is shown ovr th pictur or a w

sconds. This inormation consists o th

channl numr and nam, th ormat in which

th proram is roadcast (480i SD, 480P SD,

720P HD, 1080i HD), audio channl 1/2 or 2/2

(omittd i altrnat channl is not roadcast),

lanua, proram titl, proram start and nd

tim, proram ratin and i CC is availal.

Whn ou prss th INFO utton on th rmot,

ou not onl t th inormation hadr

displad, ut also a short summar o th

proram contnt whn availal rom th

roadcastr. I ou do nothin ls with th

INFO utton, ths panls will rmain on th

scrn, vn whn chanin channls.

Prss th INFO utton and th proramsummar will disappar, ut th inormation

hadr will rmain.


43/81


4


Prss th INFO utton aain and onl th channl

numr and nam will rmain. Prss th INFO utton

on mor tim and this will disappar.

3.4.3 Program Information

Prss th gUIDe utton on th rmot and proram inormation or th channl ou ar watchin

will displad on th scrn with th liv proram contnt in a small window in th lowr lt

cornr o th panl.

Prss th or arrow utton to scroll up or down th channls. each tim ou paus at a

channl, th proram list will updat with th proram schdul or that channl and th

window will show th liv proram or that channl. Prss th gUIDe utton to eXIT this atur.


44/81


44


3.4.4 - Setting a Password

you control accss to th Parntal Control aturs with a password. Th dault password is 0000. you can

chan th password to an our-diit numr.

To chan th password:

1. Prss th MeNU utton to opn th main On-Scrn Displa

(OSD) Mnu.

2. Prss th on th rmot control thr tims until th

Parntal Controls mnu opns.

. Prss utton on th rmot control to hihliht Parnt

Lock enal. Th K-In Accss Cod window opns.

4. Us th numr pad to tp th dault password (0 0 0 0), thn

prss OK.

5. Prss utton on th rmot control to hihliht Accss

Cod edit.

6. Prss th on th rmot control to ntr into th sumnu.you will nd to us th numr pad to tp th dault pass

word rst.

7. Us th numr pad to tp th nw password.

8. Conrm th nw password rtpin it.

9. Prss th eXIT utton on th rmot control immdiatl to xit th OSD mnu.

Note:

a) Plas mak sur to writ down and stor th nw password in a scur plac. Th rst option in

th Spcial Faturs mnu (Sction .5.2) dos not rst th password.

) Th DTV Parntal Control password will alwas th sam as this on.


45/81


45


3.5 - Using the On-Screen Display (OSD)

Th rmot control or th ottom control ks on th ront panl o th TV can control all th unction

sttins. Th on-scrn displa (OSD) allows ou to adjust and sav contrast, rihtnss and othr sttins.

Th TV will sav chans mad to th sttins, vn i th TV is turnd o.

3.5.1-OSD Menu Operations

Th OSD consists o svral mnu options: Pictur Adjust, Audio Adjust, TV Tunr Stup, Parntal Controls,

PIP St Up, or Spcial Faturs. Th main mnu options ma var dpndin on our slctd input sourc.

Not: Som o th main mnu options ma hav additional su mnus, i.. H-Position in th Pictur Adjust

or Diital HD.

1. Prss th OSD utton on th ront o th TV or th mnu utton

on th rmot control. Th Main Mnu will displad on th

TV scrn.

2. Us th Volum (+/-) uttons on th ront o th TV or on th rmot control to slct ono th sumnus - Pictur Adjust, Audio Adjust, TV Tunr Stup,

ParntalControls, PIP St Up, or Spcial Faturs.

. Onc th sumnu is hihlihtd, us th Channl (+/-) uttons

on th ront o th TV or uttons on th rmot control to

slct a mnu option.

4. Us th Volum (+/-) uttons on th ront o th TV or

uttons on th rmot control to slct/adjust th options

sttins.

5. Prss th OK utton on th rmot control to conrm th

atur.

6. Rpat stps 2 throuh 5 to adjust additional options within this mnu.

7. Onc th adjustmnts ar compltd, prss th exit utton on th rmot control to xit th OSD

compltl.


46/81


46


3.5.2 Picture Adjust

Available or the ollowing input sources AV1, AV2, AV,

Analo HD1, Analo HD2, Diital HDTV, or DTV.

Picture Mode Slct rom on o th ollowin: Usr,

VIVID1, VIVID2 or VIVID.

Backlight Adjust rihtnss o lamps.

Brightness Adjusts th lack lvls o th pictur. Usrs ma

nd to radjust th rihtnss atr th TV warms up.

Contrast Adjusts th lvl o whit twn th lihtst and darkst portions o an ima. I

th contrast is too low, th pictur appars dark and lacks dtail. I th contrast is too hih, th

pictur appars add and lacks shadow and dpth.

Color Adjusts th lvls o whit and color in th pictur. Hihl saturatd colors tnd to

dp and stron whil unsaturatd colors ar wakr and lihtr.

Tint Adjusts to mak th fsh tons mor natural.

Sharpness Adjusts th clarit o th pictur. I th sharpnss is st too hih, hard ds in th

pictur appar to hav a host ima.

Closed Caption Choos on o th ollowin options: O, CC1, CC2, CC, CC4, TT1, TT2, TT,

or TT4.

3.5.3 - Picture

Available or the ollowing input sources Rgb.

Auto Adjust Automaticall sts th position and siz o

th pictur.

Brightness Adjusts th lack lvls o th pictur.

Usrs ma nd to radjust th rihtnss atr th

LCD TV warms up.

Contrast Adjusts th lvl o whit twn th lihtst and darkst portions o an ima. I

th contrast is too low, th pictur appars dark and lacks dtail. I th contrast is too hih, th

pictur appars add and lacks shadow and dpth.

H-SIZE Adjusts th horizontal siz o th ima.

H-POSITION Adjusts th horizontal position on th ima adjustmnt.

V- POSITION Adjusts th vrtical position on th ima adjustmnt.

FineTune Allows usr to manuall adjust th ima.


47/81


47


3.5.4 Temperature

Th Tmpratur Mnu Option is onl availal whn Rgb

slctd as th input. Th standard color tmpratur or all

othr inputs is 6500K to match th color tmpratur o th

sourc.

Color Temp. Options includ Usr, 5000k, 6500k and 900k.

Red Adjusts th rd lvls o th pictur.

Green - Adjusts th rn lvls o th pictur.

Blue - Adjusts th lu lvls o th pictur.

3.5.5 Audio Adjust

Volume Adjusts th volum.

Bass Adjusts th ass.

Treble Adjusts th trl.

Balance Adjusts th alanc lvl twn th channls.

Surround Usr slcts ithr on or o.

Reverb Slct rom on o th ollowin: Concrt, Livin

Room, Hall, Arna or O.

Mute Turns th sound ithr on or o.

Speaker Turns th intrnal spakrs on or o.

3.5.6 - TV Tuner Setup for TV

Sound Chans th sound output or TV prorams. Switch

twn STeReO, MONO, or SAP (Scond Audio Proram)

or audio simulcasts. Th TV proram must support th output

option.

TV/Cable Mode Sts th sourc or th tunr. Optionsinclud TV or Cal. TV sts th tunr or an antnna

and CAbLe sts th tunr or cal or a satllit dish.

Auto Search Adds all channls that hav a sinal to th

channl list.

Set Channel entr th channl slction to addd or dltd.

Skip Channel Dlts th st channl rom th channl list.


48/81


48


3. 3.5.7 Parental Controls for TV

Parental Lock Enable - Turns TV and movi lockin on or o.

TV Ratin - Sts th lvl o tlvision prorams that will

lockd without tpin in th password. For mor inormation,

s Sction .5.1 - Usin th Parntal Controls, pa 50.Movie Rating - Sts th lvl o movis that will lockd

without tpin in th password. For mor inormation, s

Sction .5.1 - Usin th Parntal Controls, pa 50.

Access Code Edit Chans th password usd or modiin th parntal control sttins or

watchin a proram lockd th parntal controls. For mor inormation, s Sction

.5.14 - Sttin a Password, pa 51.

3.5.8 PIP/POP Setup

Style - Chans th tp o su-pictur. Options includ

O, PIP (pictur in pictur) or POP (pictur pictur).

Source - Chans th vido input sourc o th su-pictur

whn PIP is turnd on. Not: For additional inormation rard-

in th PIP/POP options, s sc..4.2. - Pictur-in-Pictur

(PIP)/Pictur--Pictu (POP) Mod, pa.

Size Chans th siz o th su-scrn pictur. Choos

rom on o th ollowin: small, mdium or lar.

Position - Mov th su-pictur within th displa ima.

3.5.9 Special Features

Language - Chans th lanua o th On-Scrn

Displa (OSD) mnu. Options includ Frnch, Spanish

or enlish.

Sleep Timer Sts slp timr ithr on or o. Usrs can

slct th numr o minuts th LCD monitor waits or it

automaticall turns o in 0-minut incrmnts. Maximum

availal tim is 120 minuts.

Wide Format - Chans th main scrn siz. Choos rom

th ollowin: Normal, Wid, Zoom or Panoramic. For additional inormation, plas s Sction

.5. - Undrstandin Viwin Faturs, pa 0.

Reset All Settings - Rsts th displa ack to th actor dault sttins.


49/81


49


3.5.10 - Understanding Viewing Features

your LCD TV aturs our viwin mods and Pictur-in-Pictur (PIP)/Pictur--Pictur (POP) mod. you

can switch viwin mods usin th On-Scrn Displa (OSD) or th rmot control. For mor inormation on

usin th OSD, s .5.8 - Spcial Faturs pa 48.

3.5.11 - Viewing Modes

Normal Mode

Th oriinal 4: aspct ratio (1.:1 sourc) is prsrvd, so lack ars ar addd

to th lt and riht o th displa ima. Standard TV roadcasts ar displad

with a 4: Aspct Ratio. Movis in 4: Aspct Ratio ma rrrd to as pan-and-

scan or ull ram. Ths movis wr oriinall lmd in 16:9 (wid scrn), and

thn modid to t a traditional TV scrn (4:).

Wide ModeWhn watchin a standard roadcast or ull-ram movi in this mod, th

displa ima is strtchd proportionatl to ll th TV scrn. Whn

watchin a wid scrn (1.78:1 sourc) proram or movi, th displa ima

lls th TV scrn. I ou ar watchin a wid scrn (1.85:1 or 2.5:1

sourc) proram or movi, thr will still lack ars at th top and ottom.

Zoom Mode

Whn watchin a wid scrn (1.78:1, 1.85:1, or 2.5:1 sourc) proram or

movi, th displa ima is zoomd proportionall to ll th width o th scrn.

Th top and ottom ar cut o to rmov most o th sourc matrials lack

ars. This mod is ood or prorams or movis with su-titls.

Panoramic Mode

Whn watchin a standard roadcast or ull ram movi in this mod, th 4:

Aspct Ratio (1.:1 sourc) displa ima is strtchd horizontall on th lt

and riht sids to ll th TV scrn. Th cntr o th ima is not strtchd.

Note: Viwin mods and volum sttins ar savd asd on input. For xampl, ou last watchd a DVD

in widscrn mod and at hih volum, and thn watchd TV in standard mod and low volum. Whn

ou switch ack to DVD input, th viwin mod will rturn to widscrn and our volum will hih.


50/81


50


3.5.12 - Picture-in-Picture (PIP)/Picture-by-Picture (POP) Mode

your TV aturs PIP mod, so ou can watch two picturs at th sam tim. Whn PIP is turnd on,

prssin th PIP utton on our Rmot Control, ou can displa two picturs at on tim. On pictur is

displad as th ull scrn (main scrn) and th othr pictur is displad in a small window (su scrn).

Th su-scrn can st to small, mdium or lar.

S low or dtaild inormation rardin th PIP sourcs.

Indicats which inputs ar availal or PIP and POP mods.

3.5.13 Adjusting Basic PIP/POP Settings

PIP Channel

Th PIP channl is indpndnt o th main TV channl. To chan th PIP channl, prss th PIP CH +or - utton on th rmot control.

Swapping PIP/POP Video

you can swap th proram that is in th main pictur with th proram in th PIP su-pictur. To swap th

main pictur proram with th PIP su-pictur proram, prss SWAP on th rmot control. I ou prss

SWAP aain, it will rturn th proram to th main pictur. This works th sam i ou ar in th Pictur

Pictur (POP) mod.

Swapping PIP/POP Audio

you can also swap th audio that is in th main pictur with th proram in th PIP su-pictur prssin

th AUDIO utton (aov th SWAP utton) on our rmot control. For xampl, i ou ar listnin to th

audio or th Main Scrn and want to har th audio rom th Su Scrn ou prss th AUDIO utton; prss

th utton aain to switch ack. This works th sam i ou ar in th Pictur Pictur (POP) mod.

DTV

TV

AV1

AV2

AV

ANALOg HD 1

ANALOg HD 2DIgITAL HD

Rgb

DTV TV AV1 AV2 AV3ANALOG

HD 1

ANALOG

HD 2

DIGITAL

HDRGB

MAIN

SUB


51/81


52/81


52


R (matur audinc)

NC-17 (no on undr 17 ars o a)

X (no on undr 17 ars o a)

12. Prss th or utton on th rmot control to naviat throuh th LCD TV mnu options.

Prss or utton to lock (rd lock) or unlock (rn lock) ach ara.

1. Prss th eXIT utton on th rmot control to rturn to th sumnu.

14. Prss th eXIT utton th rmot control to xit th OSD mnu whn ou ar nishd.

3.5.15 - Setting the Sleep Timer

Th Slp Timr lts ou st a tim dla to turn o our LCD TV automaticall.

To st th Slp Timr usin th rmot control:

1. Prss th TV componnt utton.

2. Prss th SLeeP utton on th rmot control. Th Slp Timr appars in th cntr o our scrn.. Prss th SLeeP utton on or mor tims to slct th tim ou want. Options includ 0, 60, 90 or 120

minuts.

To turn o th slp tim usin th rmot control, prss th SLeeP utton rpatdl until O appars.


53/81


5


3.6 - Programming the VIZIO Universal Remote Control

you can proram th rmot control to work with up to our dirnt componnts. Listd low ar th stps

or prorammin our VCR, Cal box and DVD Plar.

3.6.1 - Programming for VCR

1. Manuall turn on th VCR.

2. Prss th VCR utton on th rmot control.

. Prss and hold th SeTUP utton until th LeD LIgHT fashs twic.

4. Find th prorammin cod or our VCR in th cod list in th ack o this ook and ntr it usin th

Numr buttons. I th cod is accptd, th LeD fashs twic atr th last diit is ntrd.

I th LeD dos not fash twic, rpat Stps 2 throuh 4 with th nxt cod listd or th componnt and

manuacturr.

5. Point th rmot control at th VCR and prss th POWeR utton. Th VCR will turn o.

Note:

a) I our VCR dos not rspond, tr all th cods or our rand. I th cods do not work, or our

rand is not listd, s Sarchin or Componnt Cods.

) Somtims a cod listd will onl includ limitd unctions. Tr othr cods that ma includ mor

unctionalit.


54/81


54


3.6.2 - Programming for Cable Box

1. Manuall turn on th Cal box.

2. Prss th Cal utton on th rmot control.


4. Find th prorammin cod or our Cal box in th cod list in th ack o this ook and ntr it usinth Numr buttons. I th cod is accptd, th LeD fashs twic atr th last diit is ntrd.


manuacturr.

5. Point th rmot control at th Cal box and prss th POWeR utton. Th Cal box will turn o.

3.6.3 - Programming for DVD Player

1. Manuall turn on th DVD Plar.

2. Prss th DVD utton on th rmot control.


4. Find th prorammin cod or our DVD plar in th cod list in th ack o this ook and ntr it usin

th Numr buttons. I th cod is accptd, th LeD fashs twic atr th last diit is ntrd.


manuacturr.

5. Point th rmot control at th DVD Plar and prss th POWeR utton. Th DVD Plar will turn o.

Note:

a) I our Cal box dos not rspond, tr all th cods or our rand. I th cods do not work, or

our rand is not listd, s Sarchin or Componnt Cods.


unctionalit.

Note:

a) I our DVD dos not rspond, tr all th cods or our rand. I th cods do not work, or

our rand is not listd, s Sarchin or Componnt Cods.


unctionalit.


55/81


55


3.6.4 - Searching for Component Codes

I th usr cannot nd th manuacturr in th componnt list or th proram cod dos not work, th usr

can us th rmot control to sarch or th corrct componnt cod.

To sarch or a componnt cod:

1. Turn on th componnt.

2. Prss th matchin componnt utton on th rmot control.

. Prss and hold th SeTUP utton until th LeD fashs twic.

4. Prss 9 9 1. Th LeD fashs twic.

5. Point th rmot control at th componnt and thn altrnat twn prssin th POWeR utton and th

componnt utton on th rmot control until th componnt turns o.

I th componnt still dos not rspond, clar th componnt utton, thn rpat th sarch procdur.

3.7 Using a Cable Box or Satellite Box Remote

your VIZIO rmot uss cods 1758 and 0178 to work with our L2 LCD TV. To us a cal or satllit

rmot to work with our L2, rr to our cal or satllit rmot usr uid or mor inormation on how

to proram th rmot. I our cal or satllit rmot uss a 4-diit rmot proram, rst tr 1758. I that

dosnt work, us 0178. I our cal or satllit rmot is a 5-diit rmot cod proram (lik most Dirct

TV units), rst tr 11758. I that dosnt work, us 10178. I our cal or satllit rmot uss a -diit

cod (For xampl, echostar and Dish Ntwork), us cod 627.

NOTE: Som unctions on our cal or satllit rmot ma not unction lik xpctd. Tpicall, powr,

volum and mut will work.


56/81


56


Chapter 4 - Maintenance and Troubleshooting

4.1 - Maintenance

Important

1. Mak sur that th powr cal is rmovd rom th sockt or clanin th displa.

2. Do not us volatil solvnt (such as tolun, rosin and alcohol) to clan th displa. Such chmicals ma

dama th housin, scrn lass and rmot control, and caus th paint to pl.

Cleaning the Housing and the Remote Control

1. Us a sot cotton cloth or clanin.

2. I th housin or rmot control is sriousl contaminatd, us a sot cloth moistnd with dilutd nutral

clanr to clan th displa. Wrin watr out o th cloth or clanin to prvnt watr rom

pntratin into th housin. Wip th displa with a dr cloth atr clanin.

Cleaning the Screen

1. Us a sot cotton cloth to ntl clan th scrn.

2. Th scrn lass is vr rail. Do not scrap it with an sharp ojct. Do not prss or tap th scrn to

avoid crackin. Whn th scrn is sriousl contaminatd, us a sot cloth moistnd with dilutd nutral

clanr to clan th displa. Wrin watr out o th cloth or clanin to prvnt watr rom

pntratin into th housin. Wip th displa with a dr cloth atr clanin.

4.2 - Troubleshooting Guide

I th displa ails or th prormanc chans dramaticall, chck th displa in accordanc with th

ollowin instructions. Rmmr to chck th priphrals to pinpoint th sourc o th ailur. I th displa

still ails to prorm as xpctd, contact th dalr or assistanc.

Problem Solution

Chck our audio connction.

Prss MUTe on th rmot control aain, so that MUTe disappars romth scrn.

Chck our audio sttins, our TV audio ma st to SAP or minimum.

Prss th Volum + (Up) k on our rmot control.

Mak sur that hadphons ar not connctd.

Chck to s i our spakrs ar turnd on or o. (S pa 28)

Mak sur th AC powr utton is ON, DC powr utton is ON (grn LeD).

Mak sur AC powr cord is scurl connctd to th AC sockt.

Plu anothr lctrical dvic (lik a radio) to th powr outlt to vri that th

outlt is supplin th propr volta.

Thr is not an powr.

Thr is not an sound.


57/81


57


Problem Solution

Chck our input connctions.I th scrn is lu

Mak sur th vido cal supplid with th LCD displa is tihtl scurd to th

vido output port on th ack o th computr. I th othr nd o th vido cal

is not attachd prmanntl to th LCD displa, tihtl scur it to th LCD

displa.

Adjust rihtnss and contrast.

I ou ar usin a Macintosh oldr than g, ou will nd a Macintosh adaptr.

Chck Sourc sttins.

I an colors (rd, rn, or lu) ar missin, chck th vido cal to mak sur

it is scurl connctd. Loos or rokn pins in th cal connctor could caus

an impropr connction.

Connct th LCD displa to anothr computr.

Prss onl on utton at a tim.

Mak sur attris ar insrtd corrctl.

battris could wak.

Mak sur ou hav slctd th TV utton on th rmot.

TV: For st ima qualit, Standard Dinition TV should viwd as 4:.

Mak sur that th powr cord is plud into a roundd lctrical outlt.

Mak sur that th powr utton is turnd on.

Mak sur that th slctd input sourc is connctd to a workin input sourc.

I our LCD TV is connctd to our computr in Rgb or HDMI mod, prss an

k on our koard to wak our computr.

you ma ttin intrrnc rom lctrical appliancs, cars, motorccls, or

luorscnt lihts. Tr movin our LCD TV to anothr location.

Mak sur that th input sourc cal is attachd scurl and corrctl to th

ack o our LCD TV.

Mak sur that th vido input sourc is within th ran o our LCD TV.

Compar th vido input sourcs spciications with our LCD TV spciications.

I ou ar usin Rgb mod, mak sur that H Siz and V Position in th OSD arst corrctl.

I ou ar usin TV, AV1, AV2, or componnt (Analo HD) with 480i input, us

th WIDe utton on th rmot control to scroll throuh various scrn mods.

Mak sur that th volum is not turnd down.

Mak sur that th sound is not mutd.

Mak sur that our audio input sourc cals ar connctd scurl and

corrctl.

your LCD TV is manuacturd usin an xtrml hih lvl o prcision

tchnolo.

Howvr, somtims som pixls o our LCD TV ma not displa. Pixl dcts

within industr spciications ar inhrnt to this tp o product and do not

constitut a dctiv product.

Powr is ON, ut no scrn ima.

Wron or anormal colors appar.

Control uttons do not work.

Rmot Control dos not work.

Thr appars to ima qualit issus.

you cannot s a pictur.

you s a distortd pictur or har unusual

sound.

Th pictur has anormal pattrns.

Th displa ima dos not covr th ntirscrn.

you can s a pictur ut ou cannot har

sound.

Th LCD TV has pixls that ar alwas

riht, dark, or colord.


58/81


58


Problem Solution

Whn our LCD TVs diital capailitis xcd a diital roadcast sinal, th

sinal is up-convrtd (incrasd) to match our LCD TVs displa capailitis.

Up-convrtin can caus nois or trash.

Th LCD TV rmmrs th volum lvl rom th last tim ou usd a particular

input (AV1, AV2, Analo HD, Diital HD, and TV).

Th LCD TV rmmrs th viwin mod rom th last tim ou usd a particular

input (AV1, AV2, Analo HD, Diital HD, and TV).

you s nois or trash on th scrn.

you switch to a dirnt input and th

volum chans.

you switch to a dirnt input and th

scrn siz chans.

4.3 - Telephone & Technical Support

Products ar otn rturnd du to a tchnical prolm, rathr than a dctiv product that ma rsult in

unncssar shippin chars illd to ou. Our traind support prsonnl can otn rsolv th prolm ovr

th phon. For mor inormation on warrant srvic or rpair, atr th warrant priod, plas contact our

Support Dpartmnt at th numr low.

Qualit srvic and consistnt tchnical support ar intral parts o VIZIOs commitmnt to srvic

xcllnc. VIZIOs srvic rprsntativs ar ddicatd to assist ou with th utmost in customrsatisaction. To ttr assist ou, plas call or contact us via mail.

Tl: (714) 668-0588, 7:0 am 5:0 pm PST Mon - Fri

e-mail: [email protected]

VIZIO

20A Kalmus Driv

Costa Msa, CA 92626

Tl: (714) 668.0588 Fax: (714) 668-9099

W: www.VIZIOCE.com

Th LCD TV is an idal platorm or viwin Hih Dinition Contnt.

bst Ima Qualit will achivd th HDMI Input, thn yPPr, thn Rgb.

Howvr, du to variancs in roadcast practics, it is possil som ima

distortions can occur.

Lttroxd (or Wid Scrn) vrsions o DVD movis ar most commonl

ormattd or standard 4: Tlvisions. Th LCD TV has th capailit o

xpandin this contnt so th ntir scrn is illd at th xpns o ima

accurac. To us this unction, prss th ZOOM k on th rmot control and

ccl amon th availal options.

Tips or Hih-Dinition Usrs

Tips or Lttrox Contnt Usrs


59/81


59


4.4 - Compliance

Caution: Alwas us a powr cal that is proprl roundd. Plas us th AC cords listd low or ach

ara.

USA UL

Canada CSA

grman VDe

britain bASe/bS

Japan elctric Applianc Control Act

4.5 - FCC Class B Radio Frequency Interference Statement

NOTe: This quipmnt has n tstd and ound to compl with th limits or a Class b diital dvic, pursu-

ant to Part 15 o th FCC Ruls. Ths limits ar dsind to provid rasonal protction aainst harmul

intrrnc in a rsidntial installation. This quipmnt nrats, uss and can radiat radio rqunc n-

r, and i not installd and usd in accordanc with th instructions, ma caus harmul intrrnc to radiocommunications. Howvr, thr is no uarant that intrrnc will not occur in a particular installation. I

this quipmnt dos caus harmul intrrnc to radio or tlvision rcption, which can dtrmind

turnin th quipmnt o and on, th usr is ncourad to tr to corrct th intrrnc on or mor o

th ollowin masurs:

1. Rorint or rlocat th rcivin antnna.

2. Incras th sparation twn th quipmnt and rcivr.

. Connct th quipmnt into an outlt on a circuit dirnt rom that to which th rcivr is connctd.

4. Consult th dalr or an xprincd radio/TV tchnician or hlp.

Notic:

1. Th chans or modications not xprssl approvd th part rsponsil or complianc could void th

usrs authorit to oprat th quipmnt.

2. Shildd intrac cals and AC powr cord, i an, must usd in ordr to compl with th mission

limits.

. Th manuacturr is not rsponsil or an radio or TV intrrnc causd unauthorizd modication

to this quipmnt. It is th rsponsiilitis o th usr to corrct such intrrnc.


60/81


60


Specications

Speciications

2 Diaonal, Color TFT Activ Matrix LCD

166 x 768 pixls (WXgA ormat)

24 it 16.77 million colors

HDTV (720p) Nativ,1080i

480i (SDTV), 480p (DVD / eDTV), 720p (HDTV), 1080i (HDTV)

8 ms (tpical)

500 cd/m2 (tpical)

800:1 (tpical)

170 (horizontal), 170 (vrtical)

2x RF (or ATSC (DTV) and NTSC (TV) inputs), 1x HDMI

(DIgITAL HD), 2x Componnt (ANALOg HD1, ANALOg HD2), x

Composit (AV1, AV2, AV), 1x S-Vido (AV), 1x Computr(Rgb),

5x Stro Audio in (RCA), 1x PC Audio in (Mini jack), 1x RS22 or

srvic (RJ-11)1 x Audio out (RCA), 1 diital audio optical output (DTV/ATSC Sourc)

PIP, POP, Nois Rduction, :2 Pull Down, D Com Filtr, Prors-

siv Scan, Aspct Ratio convrsion, D D-intrlacr, gamma Corrc-

tion, Stro, MTS and SAP, Closd Caption, V-Chip (Parntal Control)

stro 10 watt / channl intratd spakrs

60,000 hours (hal-li), (tpical 27 ars)

IeC Connctor or dirct powr lin connction

100-240 VAC 50-60Hz

160 W

Tmpratur: 5~5C, Rlativ Humidit: 10~90%, Altitud: 0~14,000 t.

Tmpratur: -20~50C, Rlativ Humidit: 10~90%, Altitud: 0~40,000 t.

2.2" (W) x 25.4" (H) x 11" (D) with stand

2.2" (W) x 24." (H) x 5.1" (D) w/o stand

4 ls w/stand, 8 w/o stand

UL, C-UL, FCC Class b

Panl

Rsolution

Colors

Displa Compatiilit

Sinal Compatiilit

Rspons Tim

brihtnss

Contrast

Viwin Anl

Inputs

Output

Faturs

Spakrs

Lamp Li

Power

Environment Conditions

Input

Volta RanPowr Consumption

Opratin

Non-Opratin

Dimnsions

Nt Wiht

Crtiications


61/81


62/81


62


INDEX

AAdjustments

- Audio 47

- Picture 46

- Volume 47

- TV Channels 32

- Wide (Wide, Zoom, Panoramic, Normal) 48-49

Audio Adjust 47

Auto Scan 34

CChannel Inormation 42

Closed Caption 37, 46

Component Codes or Televisions 65

Controls

- Front Panel 10

- Side Panel 10

Connections

- Antenna or Cable 30- Audio and Video cables 30

- Amplifer 28

- Coaxial (RF)

- Using Your Antenna or DTV 26

- Using Your Antenna or Cable TV 27

- Using the Antenna through Your VCR 27

- Computer 29

- DVD Player

- Using HDMI (Digital HD) 17

- Using Component (Analog HD) Video 19

- Using S-Video (AV3) 20

- Using Composite (AV) Video 21

- HDTV Set-Top Box 22

- Using HDMI (Digital HD) 22- Using RGB Video 24

- Power Cables 30

- Rear Panel Connections 11

- Speakers 28

- VCR 25

- Video Camera 25

- Video Connections 16

DDTV Tuner Setup 33

GGlossary Standard Defnitions 61

IInput Source 30

LLimited Warranty 64

MMaintenance 56

Manual Scan 35, 36


63/81


6


OOn Screen Display (OSD)

- Menu Operations 45

- Picture Adjust 46

- Picture 46

- Temperature 47

- Audio Adjust 47- DTV Tuner Setup 33

- TV Tuner Setup 47

- Parental Controls 40

- PIP Setup 48, 50

- Special Features 48

PPIP (Picture in Picture) 48, 50

POP (Picture by Picture) 48, 50

Parental Controls

- For DTV 51

- For TV 48

- Setting a Password 44

- Use o 51Picture Adjust 46

Program Inormation 43

RRemote Control

- Battery insertion 15

- Buttons 12

- Component Codes, searching or 55

- Component Codes or TV 65

- Precautions 15

- Programming or VCR 53

- Programming or Cable Box 54

- Programming or AUX (DVD Player) 54

- Range 15

- Using a Cable Box or Satellite Box Remote 55

SSaety Instructions 4

Sleep Timer 52

Special Features 48

Specifcations 60

TTuner Setup

- DTV Tuner Setup 33

- TV Tuner Setup 30

Telephone and Technical Support 58

Troubleshooting Guide 56

VViewing Modes (Normal, Wide Zoom, Panoramic) 48- 49

WWall Mounting 7-8


64/81


64


Appendix A: Limited Product Warranty

Plas rad this warrant card carull, it is a ONe-yeAR LIMITeD WARRANTy on parts and laor. S low or th VIZIO

extndd Srvic warrant.

VIZIOs Responsibility

VIZIO Displas purchasd in th Unitd Stats ar warrantd to r rom dcts in matrials or workmanship or a priod o on (1)

ar rom th dat o thir oriinal rtail purchas. I th unit ails to conorm to this warrant, w will srvic th monitor usin nw or

rurishd parts.

Service Labor

Durin a priod o on (1) ar rom th ctiv warrant dat, VIZIO will provid, whn ndd, srvic laor to rpair a manuacturin

dct at its dsinatd Srvic Cntr. To otain warrant srvic in th Untid Stats, ou must rst call our Customr Support at

(714) 668-0588, 7:0 am 5:0 pm PST. Th dtrmination o srvic will mad VIZIO Customr Support. PLeASe DO NOT

ReTURN yOUR UNIT TO VIZIO WITHOUT PRIOR AUTHORIZATION.

Parts

Nw or rmanuacturd rplacmnts or dctiv parts will usd or rpairs VIZIO at its dsinatd Srvic Cntr or on (1)

ar rom th ctiv warrant dat. Such rplacmnt parts ar warrantd or th rmainin portion o th oriinal warrant priod.

Service

Durin th on (1) ar warrant priod, VIZIO will, at its option and sol discrtion, rpair or rplac dctiv parts, includin

rplacmnt o th ntir Panl. Th Customr will rquird to ship th unit to th Srvic Cntr indicatd at th tim Customr

Support is contactd to mak th ncssar rpairs, ou ar rsponsil or all transportation chars to and rom th srvic acilit.

VIZIO is not rsponsil or th d-installation or r-installation o th unit.

Packaging and Shipping Instruction

Whn ou snd th product to an authorizd VIZIO srvic acilit ou must us th oriinal carton ox and packin matrial or anquivalnt as dsinatd VIZIO.

Not Covered

This warrant dos not covr dcts, malunctions or ailurs rsultin rom shippin or transit accidnts, aus, misus, opration

contrar to urnishd instructions, opration on incorrct powr supplis, opration with ault associatd quipmnt, modication,

altration, impropr srvicin, tamprin or normal war and tar or TVs on which th srial numr has n rmovd or dacd. Ima

Stickin causd opratin at xcssiv rihtnss lvls or xtndd priods or mishandlin ar not covrd this warrant.

ANy IMPLIeD WARRANTIeS, INCLUDINg ANy IMPLIeD WARRANTy OF MeRCHANTAbILITy AND FITNeSS FOR A

PARTICULAR PURPOSe SHALL be LIMITeD IN DURATION TO THe PeRIOD OF TIMe SeT FORTH AbOVe. OUR LIAbILITy

FOR ANy AND ALL LOSSeS AND DAMAgeS ReSULTINg FROM ANy CAUSe WHATSOeVeR, INCLUDINg OUR NegLIgeNCe,

ALLegeD DAMAge OR DeFeCTIVe gOODS, WHeTHeR SUCH DeFeCTS ARe DISCOVeRAbLe OR LATeNT, SHALL IN NO

eVeNT eXCeeD THe PURCHASe PRICe OF THe DISPLAy. We SHALL NOT be ReSPONSIbLe FOR LOSS OF USe,

COMMeRCIAL LOSS OR OTHeR INCIDeNTAL OR CONSeQUeNTIAL DAMAgeS. SOMe STATeS DO NOT ALLOW LIMITATIONS

ON HOW LONg AN IMPLIeD WARRANTy LASTS OR THe eXCLUSION OR LIMITATION OF INCIDeNTAL OR

CONSeQUeNTIAL DAMAgeS, SO THe AbOVe LIMITATIONS OR eXCLUSIONS MAy NOT APPLy TO yOU. This warrant ivs

ou spcic lal rihts, and ou ma also hav othr rihts, which var rom stat to stat. This is th onl warrant applical; no on is

authorizd to xtnd or modi it or to rant an othr warrant.

VIZIO rtains th riht to assss all warrant claims and to dtrmin i damas ar covrd th warrant. In cas o a claim that is

not covrd th warrant, ou will contactd to dtrmin whthr VIZIO should rpair th dama or a or whthr th product

should rturnd to ou as rcivd th rpair cntr.

Owners Responsibility

ectiv Warrant Dat

Warrant ins on th dat o sal to th nd usr. To nsur warrant srvic, kp th datd ill or sal rcipt as vidnc o th

purchas dat.

Warranty Service

For warrant srvic inormation, contact VIZIO Customr Support at (714) 668-0588, 7:0 am to 5:0 pm PST or visit www.vizioc.

com. Parts and srvic laor that ar VIZIOs rsponsiilit (s aov) will providd without char. Othr srvic is at th ownrs

xpns. you must provid th modl, srial numr and dat o purchas. bor ou ask or warrant srvic, rad our Usr Manual.

you miht avoid a srvic call.

For additional inormation rardin our warrant, plas s complt dtails onlin at www.VIZIOCe.com.

VIZIO EXTENDED SERVICE WARRANTY

Protct our invstmnt ond th standard warrant and xprinc pac o mind with VIZIOs extndd Srvic Warrant.

Dpndin on our modl, plans ar ord or 2-5 ars. Visit www.vizioc.com or call 1-888-VIZIOCe (1-888-849-462) to purchas

a plan toda.


65/81


65


Appendix B: Component Program Codes

SETUP CODES FOR CURRENT VIZIO PRODUCTS

Setup Code for TVs (1 Prefix) Setup Code for TVs (1 Prefix)


66/81


66




67/81


67


Setup Code for TVs (1 Prefix)Setup Code for TVs (1 Prefix)


68/81


68



8/2/2019 L32HDTV Ma

L32HDTV Manual 11206 Web

Documents

Transcript of L32HDTV Manual 11206 Web