L00090 Rev 12-03 · 2017-11-15 · Mack drive axle with clamp bracket and flat stud AA1 and S-ABA...
Transcript of L00090 Rev 12-03 · 2017-11-15 · Mack drive axle with clamp bracket and flat stud AA1 and S-ABA...
Innovative Vehicle Solutions
PARTS/CROSS-REFERENCEINFORMATION
AA1 and S-ABA Brake Adjusters
Important Notice
The products described within this literature, including without limitation, product features, specifications,designs, availability and pricing are subject to change by Haldex and its subsidiaries at any time withoutnotice.
This document and other information from Haldex, its subsidiaries and authorized distributors provideproduct and/or system options for further investigation by users having technical expertise. It is importantthat you analyze all aspects of your application and review the information concerning the product orsystem, in the current literature or catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through their own analysis and testing, is solely responsible formaking the final selection of the products and systems and assuring that all performance, safety and warning requirements are met.
A
Table of Contents
Warning: Haldex strongly recommends routine visual checks be performed at EACH maintenanceservice interval. Foundation brake operational checks utilizing CVSA level 1 applied stroke criteriashould always be utilized. Manual adjustment of automatic adjusters can disguise hiddenproblems within the foundation brake. Brake components such as s-cams, bushings, return springs,actuators, drums and adjuster installation MUST be within manufacturer’s specifications. Adjustercontrol arms, wear bushings or attaching hardware that demonstrate visual damage, or which failthe operational checks, MUST be replaced immediately. Automatic Adjusters should NEVER beoperated as manual adjusters except as may be necessary to get the vehicle off the road forservice.
If you have any questions on this product or any of the Innovative Products offered by Haldex,contact your local distributor for complete details. Technical Service or Troubleshooting help canbe obtained by calling Haldex Technical Services Department at 800-643-2374, OPTION 2.
©2016 All Rights Reserved
Material may only be reproduced with the written permission of Haldex.
AA1 and S-ABA L00090Brake Adjusters 2-16
2016 Innovative Vehicle Solutions 1
PageFeaturesHaldex ABA (AA1) .....................................................................................................2Haldex S-ABA.............................................................................................................2
IdentificationSelecting Your Haldex ABA ......................................................................................3Haldex ABA (AA1) ................................................................ ....................................3Haldex S-ABA................................................. ............................................................3
ApplicationsSteer Axle ..................................................................................................................4Trailer Axle (12 1/4” Brake Assemblies)................................................. ..................5Trailer Axle (16 1/2” Brake Assemblies) ...................................................................5Drive Axle...................................................................................................................6
Cross-ReferenceHaldex ABA to Kit Cross-Reference .........................................................................7
Haldex ABA Replacement PartsHardware and Hardware Kits ..................................................................................8Bushings .....................................................................................................................9
Self-Setting control arm can be positioned from -16° to +130°.
Reduces the potential for installation errors.
Saves time.
Sensitive adjustment rate provides optimal lining to drum clearance.
Reliable “O” rings and gaskets seal out moistureand contaminants.
Easily accessible hex nut simplifies adjustment.
Housing is heat treated for wear and corrosion resistance.
Exclusive after-rolledprocess for the wormshaftincreases fatigue strength.
Control arm eliminateslinkage concerns and provides greater application flexibility.
Built-in installation indicatoreliminates templates, assures proper installation.
Control Disc
Wormshaft
HeatTreatedHousing
One-WayClutch
Coil Spring
Clutch WheelAdjustment Hex
Worm WheelRegulator Gear
Haldex ABA Features
Haldex S-ABA Features
AA1 and S-ABA L00090Brake Adjusters 2-16
2 Innovative Vehicle Solutions 2016
Haldex automatic brake adjusters covermore applications than any otherbrand.
Backed by the industry’s longestwarranty.
Compatible with all major brandclevises.
Part NumberP/N40910224Serial NumberS/N33489
Part Number:409-10_ _ _ = Reduced maintenance
adjuster429-10_ _ _ = No-Lube adjuster
Serial Number:First 3 digits = Day of year builtLast 2 digits = Year of build
Prior to Sept. 1989
The first three numbers stamped
on the cover plate is the brake
adjuster part number. For
example: 224 would be our
adjuster part number
409-10224.
After Sept. 1989
The Part No. P/N40910224
would be our adjuster part
number 409-10224.
Step 1Determine what axle the adjuster will be used on; see typical applications on the following pages.
Step 2Determine the camshaft diameter and number of splines.
Step 3Determine the adjuster arm length.
Step 4Select the proper kit number. The kit includes: Haldex Automatic Brake Adjuster, anchor bracket, anti-seize lubricant and installation instructions.
Part Number:409-20_ _ _ = S-ABA Brake Adjuster
Serial Number:First 3 digits = Day of year builtLast 2 digits = Year of build
Selecting Your Haldex Automatic Brake AdjusterIf you currently have a Haldex ABA, refer to the Haldex ABA to Kit Cross-Reference on page 7, otherwise use the following procedures.
AA1 and S-ABA L00090Brake Adjusters 2-16
2016 Innovative Vehicle Solutions 3
5/8" OR 1-1/2" OFFSETS
AVAILABLE
ARMLENGTH
INSTALLATIONINDICATOR
CAMSHAFTDIAMETER
Haldex ABA (AA1) Identification
Haldex S-ABA Identification
The Part Number
P/N40920002
would be our
adjuster part
number
409-20002.
Part NumberP/N40920002
Serial NumberS/N26802
Steer Axle Applications
Steer axle with strap bracketMack 16,000# or higher rated steer axleswith spider mounted bracket
Steer axle withclamp bracket
AA1 and S-ABA L00090Brake Adjusters 2-16
4 Innovative Vehicle Solutions 2016
AA1 and S-ABA L00090Brake Adjusters 2-16
2016 Innovative Vehicle Solutions 5
Trailer Axle Applications(for 12-1/4” Brake Assemblies)
Trailer Axle Applications(for 16-1/2” Brake Assemblies)
Drive axlewith strapbracket
Mack drive axlewith clampbracket and flatstud
AA1 and S-ABA L00090Brake Adjusters 2-16
6 Innovative Vehicle Solutions 2016
Drive Axle Applications
* With 3” and longer camshaft tubes.** For short camshaft tube Mack, 2” or less.*** To avoid interference with air bag supports.
(See illustrations below)
Reference the O.E. part number that is stamped into the ABA side cover to the 400 series replacement service number below.
Use the 400 service replacement ABA kits for all aftermarket requirements. 400 series kits include new hardware and may update the ABA design.
Multiple O.E listings indicate variations by bracket kit. See bracket kit section to assure service replacement kit number.
Note: 300 & 419 series ABA’s are transit/coach applications and are not included in this catalog. Contact Haldex Customer Service at 800-643-2374 for numbers not listed.
Note: The Haldex Automatic BrakeAdjuster supplied in the Replacement Kitmay differ in appearance from the oneoriginally installed on the vehicle. AllHaldex Replacement Kits are engineered to provide the same fit and function asoriginal equipment as long as both theadjuster and bracket supplied in the kit are replaced together.
If your part number is not listedhere, contact Haldex at 1-800-643-2374. Or visit ourwebsite: www.haldex.com
AA1 and S-ABA L00090Brake Adjusters 2-16
2016 Innovative Vehicle Solutions 7
Haldex ABA to Kit Cross-Reference
AA1 and S-ABA L00090Brake Adjusters 2-16
8 Innovative Vehicle Solutions 2016
Haldex ABA Replacement PartsHardware and Hardware Kits
Long Anchor Screw 443-10188 15/16” long used with Slide Nut 443-10101
Slide Nut 443-10101 Used with Anchor Bracket427-10497, 427-10155,427-10457, 427-10548
Short Anchor Screw 443-10096 3/4” long used whenAnchor Bracket is threaded without Slide Nut
Double Bend Flat Stud 427-10558 Includes four each: PlasticKit (Trailers) Bushing, Anchor Stud, Nut
and Installation Instructionsto update from Round Pin to Flat Stud
Double Bend Flat Stud 443-10318 Included in kits: 427-10565,(Universal) 427-10566 and 427-10567,
427-10561, 427-10563
Serrated Hex Nut 443-10204 Nut (only) for DoubleBend Flat Stud
Part Description Part Number Application Information
Haldex ABA Replacement PartsBushings
7
AA1 and S-ABA L00090Brake Adjusters 2-16
2016 Innovative Vehicle Solutions 9
Part Description Part Number Application Information
Plastic Bushing 452-10126 Single Bend Control Lever(Black Oval) Replacement Bushing
Plastic Bushing 452-10125 Double Bend Control Lever(Black Rectangle) Replacement Bushing
Clevis Bushing 1/2” 452-10058 Also Used As An Insert ToConvert 5/8” to 1/2”
Clevis Bushing 5/8” 452-10128 ___
Disclaimer: The products describedwithin this literature, including withoutlimitation, product features,specifications, designs, availability andpricing are subject to change by Haldexand its subsidiaries at any time withoutnotice.
This document and other informationfrom Haldex, its subsidiaries andauthorized distributors provide productand/or system options for furtherinvestigation by users having technicalexpertise. It is important that youanalyze all aspects of your applicationand review the information concerningthe product or system, in the currentliterature or catalog. Due to the varietyof operating conditions and applicationsfor these products or systems, the user,through their own analysis and testing,is solely responsible for making the finalselection of the products and systemsand assuring that all performance,safety and warning requirements are met.
Innovative Vehicle Solutions
©2016, Haldex AB - This material may containHaldex trademarks and third party trademarks,trade names, corporate logos, graphics andemblems which are the property of theirrespective companies. The contents of thisdocument may not be copied, distributed,adapted or displayed for commercial purposes orotherwise without prior written consent fromHaldex.
KoreaHaldex Korea Ltd.SeoulTel.: +82 2 2636 7545Fax: +82 2 2636 7548E-Mail: [email protected]
MexicoHaldex de Mexico S.A. De C.V.MonterreyTel.: +52 81 8156 9500Fax: +52 81 8313 7090
PolandHaldex Sp. z.o.o.PraszkaTel.: +48 34 350 11 00Fax: +48 34 350 11 11E-Mail: [email protected]
RussiaOOO “Haldex RUS”MoscowTel.: +7 495 747 59 56Fax: +7 495 786 39 70E-Mail: [email protected]
SpainHaldex España S.A.GranollersTel.: +34 93 84 07 239Fax: +34 93 84 91 218E-Mail: [email protected]
SwedenHaldex Brake Products ABLandskronaTel.: +46 418 47 60 00Fax: +46 418 47 60 01E-Mail: [email protected]
United KingdomHaldex Ltd.Newton AycliffeTel.: +44 1325 310 110Fax: +44 1325 311 834E-Mail: [email protected]
Haldex Brake Products Ltd.MIRA Technology ParkTel.: +44 2476 400 300Fax: +44 2476 400 301E-Mail: [email protected]
USAHaldex Brake Products Corp.Kansas CityTel.: +1 816 891 2470Fax: +1 816 891 9447E-Mail: [email protected]
AustriaHaldex Wien Ges.m.b.H.ViennaTel.: +43 1 8 69 27 97Fax: +43 1 8 69 27 97 27E-Mail: [email protected]
BelgiumHaldex N.V.BalegemTel.: +32 9 363 90 00Fax: +32 9 363 90 09E-Mail: [email protected]
BrazilHaldex do Brasil Ind. E Com. Ltda.São José dos CamposTel.: +55 12 3935 4000Fax: +55 12 3935 4018E-Mail: [email protected]
CanadaHaldex Ltd.Cambridge, OntarioTel.: +1 519 621 6722Fax: +1 519 621 3924E-Mail: [email protected]
ChinaHaldex Vehicle Products Co. Ltd.SuzhouTel.: +86 512 8885 5301Fax: +86 512 8765 6066E-Mail: [email protected]
FranceHaldex Europe SASWeyersheim Tel.: +33 3 88 68 22 00Fax: +33 3 88 68 22 09E-Mail: [email protected]
GermanyHaldex Brake Products GmbHHeidelbergTel.: +49 6 221 7030Fax: +49 6 221 703400E-Mail: [email protected]
HungaryHaldex Hungary Kft.SzentlörinckátaTel.: +36 29 631 400Fax: +36 29 631 401E-Mail: [email protected]
IndiaHaldex India LimitedNasikTel.: +91 253 6699501Fax: +91 253 2380729
ItalyHaldex Italia Srl.Biassono Tel.: +39 039 47 17 02Fax: +39 039 27 54 309E-Mail: [email protected]
www.haldex.com
L000
90 U
S 2
/16
1.5
M A
LP (
Last
Rev
. 7/0
7)
Pr
inte
d In
The
USA
Haldex develops and provides reliable andinnovative solutions with focus on brake and airsuspension products to the global commercialvehicle industry. Listed on the Stockholm Stock Exchange,Haldex has annual sales of approximately 4.4billion SEK and employs about 2,235 people.