Roller Coaster Ride By laquan, tavares, and jomar R.M 208

Our Design

What Had to be Changed in our DesignWe changed how tall the coaster is by buying bigger cups and attaching the cup to the tissue roll and connected both to the rail of the coaster.

We also changed the tape becauses the tape was unstable and would not stand on its on, so we bought new tape that will be strong.

Our materialsOne of our materials was, the foam pipe; The foam pipe was used to be the roller coaster rail.

We also used cups; We used cups because we needed pressure on the cup to make the fall curve up the mountain into the cup.

We also used tape; We used tape to stick materials together, so the project can stand up; the tape worked together with the cup by, making the cup stand, do the cup will help the rail of the coaster stay still and will not fail it’s goal.

What worked with our design

What worked with our design was that we had to use tools that can help put pressure on the base, that’s how we are improving to make our project free stand.

What did we learn from this project

We learned that this project needed more mass for our project to be more stronger so the marble can go smoothly to get to the cup.We also, we learned that you need a certain amount of weight and height, if you don’t then the project wouldn’t work.

video