![JPDUDVOLV#LVPHQJHQKDULD FRP EU LJRUSXII#JPDLO FRP€¦ · hjdyd#lvphqjhqkduld frp eu hysurmhwrv hqj#jpdlo frp hgx ]lool#krwpdlo frp ilolsh#edvhdpelhqwdo frp eu jerued#fdvdq frp eu](https://static.fdocuments.net/doc/165x107/5fa5bbc4c11b4c37f05fd0f4/jpdudvolvlvphqjhqkduld-frp-eu-ljrusxiijpdlo-hjdydlvphqjhqkduld-frp-eu-hysurmhwrv.jpg)
L...all frp panel vertical seams shall have a 1/8" thermal expansion gap between panel and center...
5
� UNG ASBLY / BY OTHERS ____ _ __ � - ,. '" /--,, I � � \ ,/� � - ' I \ 4'-0" VA OEA P LL PAN A A LL DE P PA NE DI ºR IM @ @@ FLOORING BY OTHERS PANEL ELEVATION .090" CRANE VARIU DECORATIVE P PANEL NOS 1. Sî INSTALLATION GUIDE (6876) R COMPLETE INSTALLATION RECOMMDAONS. 2 Sî TECHNICAL DATA îT (6704, 777 6743, 7732, 7031, 648 FOR RIUEX@DECORATIVE FRP INFORMATION AND COLOR CODES. 3 OTH RIUEX@FORMULATIONS INCLUDE· STA, SSTA, LBALN, LNAM, STAS, SS, LNMC, STC, SSTC, LBCLN, FB, STC, STDSC, MXGC SMXGJ 4. Sî TECHNICAL DATA îT (6560) FOR CRANE SILHOUETTE TRIM ACCESSORY INFORMATION 5 Sî TECHNICAL DATA SHîT (7799) FOR COLORED SILICONE LANT INFORMATION (CRCS, CRCL, CRCG) 6. ALLOW 1/8"(32 M CLEARANCE AROUND ALL P URA TIONS FOR FIXTURES, ECTRICAL BOXES, PIPING, UC. 7. ALL FRP PAN VTICAL SEAMS SHALL HA A 1/8"THERMAL ANSION GAP BETWEEN PANEL AND CT MOLDING. 8. ALL FRP PAN HORIZONL MS SHALL HA A 1/4" THMAL ANSION GAP BETWîN PANEL AND FLOOR/UNG. NER IM C) @ \-�- �L y r ANE VA DECA P PAN NE D: BAR IM (DB) @ DE CN IM () @ WALL .075" CRANE DESIGNS DECORATI FRP PANEL NOTES Sff INSTALLATION GUIDE (6876) FOR COMPLETE INSTALLATION RECOMMDATIONS. ISO VIEW 2. Sff CHNICAL DATA EET (7505) R DESIGN OOTH IMAGí PANEL INFORMATION AND COLOR/PATTN CODES. 3. OTHER SMOOTH DESIGNS RMULATIONS INCLUDE. IPSA, IPSC, IPCN. 4. Sff TECHNICAL DATA SHEET (6560) FOR CRANE SILHOUETTE IM ACCESSORY INFORMATION 5. ALLOW 1/8"(3.2 MM) CLEARANCE AROUND ALL PENURATIONS R FIXTURES, ELECICAL BOS, PIPING, UC. 6. ALL FRP PAN VERTICAL SEAMS SHALL HA A 1/8" THMAL ANSION GAP BETWîN PAN AND CTER MOLDING. 7. ALL FRP PAN HORIZONL SEAMS ALL HA A 1/4" THERMAL EXPANON GAP BETWEEN PANEL AND FLOOR/ÎILING I CRANE .I Composites WE BELIEVE ALL INFORMATION IS ACCURATE. IT IS OFFERED IN GOOD FAITH, BUT WITHOUT GUARANTEE. SINCE ARND DO IM ING 3 A ÊP () @ A4 ELEVSO A-1 23526 W. EAMES 1 .800.435.0080 CONDITIONS OF USE ARE BEYOND OUR CONTRO;L, ALL RISKS ARE ASSUMED BY THE USER. NOTHING HEREIN SHALL BE CONSTRUED AS A RECOMMENDATION FOR USES WHICH INFRINGE ON VALID PATENTS OR AS EXTENDING CRANE DECORATIVE FRP PANELS DETAILS 0 104/19 ISSUE ÚTE NO. ÚTE RISIONS P CHK APP'O A LICENSE UNDER VALID PATENTS. SEE OUR MOST CURRENT SOS AT CRANECOMPOSITES.COM PRIOR TO CRANECOM POSITES.COM WORKING WITH OUR PRODUCTS. THIS DRAWING IS CREATED ON A 11 "x1 7" FORMAT
Transcript of L...all frp panel vertical seams shall have a 1/8" thermal expansion gap between panel and center...
� CE/UNG ASSEMBLY
/ BY OTHERS
____ _ .----,-_ __ � -,. '" /.---,, -1 ., I � �
\__ ,/� r,\ 12\ �
,,- ' I \
4'-0"
TYP
VARIETEX OECORA TIVE FRP WALL PANEL
ADHESIVE APPUED TO WALL SIDE OF FRP PANEL
r:tNE DIVISION BAR TRIM {08) @
(Ji)@@ FLOORING BY OTHERS
PANEL ELEVATION
.090" CRANE VARIUEX DECORATIVE FRP PANEL NOTES 1. SEE INSTALLATION GUIDE (6876) FOR COMPLETE INSTALLATION RECOMMENDATIONS.2 SEE TECHNICAL DA TA SHEET (6704, 7777, 6743, 7732, 7031, 6483) FOR VARIUEX@DECORA TIVE FRP INFORMATION AND COLOR CODES. 3. OTHER VARIUEX@FORMULATIONS INCLUDE· STA, SSTA, LBALN, LNAM, STAS, STCS, LNMC, STC, SSTC, LBCLN, FTBB, STC, STDSC, MXGCJ, SMXGJ 4. SEE TECHNICAL DA TA SHEET (6560) FOR CRANE SILHOUETTE TRIM ACCESSORY INFORMATION 5 SEE TECHNICAL DA TA SHEET (7799) FOR COLORED SILICONE SEALANT INFORMATION (CRCS, CRCL, CRCG) 6. ALLOW 1/8" (3.2 MM) CLEARANCE AROUND ALL PEN URA TIONS FOR FIXTURES, ELECTRICAL BOXES, PIPING, UC. 7. ALL FRP PANEL VERTICAL SEAMS SHALL HAVE A 1/8" THERMAL EXPANSION GAP BETWEEN PANEL AND CENTER MOLDING.8. ALL FRP PANEL HORIZONTAL SEAMS SHALL HAVE A 1/4" THERMAL EXPANSION GAP BETWEEN PANEL AND FLOOR/CE/UNG.
r:tNE INS/OE CORNER TRIM {IC) @
L_
\-�- �L yr (Ji)(£IJi)
CRANE VARIETEX DECORATIVE FRP PANEL
r:tNE D:ON BAR TRIM (DB) @
r:tNE OUTSIDE CORNER TRIM (OC) @
WALL
.075" CRANE DESIGNS DECORATIVE FRP PANEL NOTES Sff INSTALLATION GUIDE (6876) FOR COMPLETE INSTALLATION RECOMMENDATIONS.
ISO VIEW
2. Sff TECHNICAL DA TA SHEET (7505) FOR DESIGN SMOOTH IMAGED PANEL INFORMATION AND COLOR/PATTERN CODES. 3. OTHER SMOOTH DESIGNS FORMULATIONS INCLUDE. IPSA, IPSC, IPCN. 4. Sff TECHNICAL DA TA SHEET (6560) FOR CRANE SILHOUETTE TRIM ACCESSORY INFORMATION5. ALLOW 1/8"(3.2 MM) CLEARANCE AROUND ALL PENURA TIONS FOR FIXTURES, ELECTRICAL BOXES, PIPING, UC. 6. ALL FRP PANEL VERTICAL SEAMS SHALL HAVE A 1/8" THERMAL EXPANSION GAP BETWEEN PANEL AND CENTER MOLDING. 7. ALL FRP PANEL HORIZONTAL SEAMS SHALL HA VE A 1/4" THERMAL EXPANSION GAP BETWEEN PANEL AND FLOOR/CEILING
I CRANE .I Composites WE BELIEVE ALL INFORMATION IS ACCURATE. IT IS OFFERED IN GOOD FAITH, BUT WITHOUT GUARANTEE. SINCE
AROUND DOOR TRIM OR OPENING 3 CRANE CAP (CP)
@TYP A4
ELEV/ISO
A-1
23526 W. EAMES
1 .800.435.0080
CONDITIONS OF USE ARE BEYOND OUR CONTRO;L, ALL RISKS ARE ASSUMED BY THE USER. NOTHING HEREIN
SHALL BE CONSTRUED AS A RECOMMENDATION FOR USES WHICH INFRINGE ON VALID PATENTS OR AS EXTENDING CRANE DECORATIVE FRP PANELS DETAILS
0 12/04/19 ISSUE DATE
NO. DATE REVISIONS
PFS
BY CHK APP'O
A LICENSE UNDER VALID PATENTS. SEE OUR MOST CURRENT SOS AT CRANECOMPOSITES.COM PRIOR TO
CRANECOM POSITES.COM WORKING WITH OUR PRODUCTS.
THIS DRAWING IS CREATED ON A 11 "x1 7" FORMAT
WALL ASSEMBLY
BY OTHERS
0 12/04/19 ISSUE DATE
NO. DATE REVISIONS
PFS
BY CHK APP'D
CEILING
I CRANE J Composites 23526 W. EAMES
1 .800.435.0080
CRANECOM POSITES.COM
CRANE CAP {CP) TYP
CEILING ASSEMBLY
BY OTHERS
VARIETEX DECORA nVE FRP PANEL WALL ASSEMBLY
BY OTHERS
GYPSUM BOARD OR OTHER WALL
BY OTHERS
DETAIL
WE BELIEVE ALL INFORMATION IS ACCURATE. IT IS OFFERED IN GOOD FAITH, BUT WITHOUT GUARANTEE. SINCE
CONDITIONS OF USE ARE BEYOND OUR CONTRO;L, ALL RISKS ARE ASSUMED BY THE USER. NOTHING HEREIN
SHALL BE CONSTRUED AS A RECOMMENDATION FOR USES WHICH INFRINGE ON VALID PATENTS OR AS EXTENDING
A LICENSE UNDER VALID PATENTS. SEE OUR MOST CURRENT SOS AT CRANECOMPOSITES.COM PRIOR TO
WORKING WITH OUR PRODUCTS.
CONnNUE FRP PANEL 2• ABOVE CE/UNG
C[!LING GR/0 ANGLE
BY OTHERS
II ,,,,- SUSPENDED ff/LING
�� 7 7 7 7 -+- / BY OTHERS
7 7 / /]
CEILING
GLASBORD@ FRP PANEL
GYPSUM BOARD OR OTHER WALL
BY OTHERS
DETAIL
CRANE DECORATIVE FRP PANELS DETAILS
THIS DRAWING IS CREATED ON A 11"x17" FORMAT
CEIL/NG_DETA/LS
A-2
WALL ASS[MBL Y
BY OTHERS
APPLY SEALANT AS REQUIRED
BY OTHERS
WALL ASS£MBL Y
BY OTHERS
D 12/04/19 ISSUE DATE
NO. DATE REVISIONS
<J
L <J LI
PFS
BY CHK APP'D
I 1/8.
l�J
Ll
VAR/£TEX OECORA nVE FRP PANEL
GYPSUM BOARD OR OTHER WALL
BY OTHERS
CRANE CAP (CP) TYP
EPOXY COVE BAS£ AND FLOORING
BY OTHERS
FLOOR ASS£MBL Y
BY OTHERS
WALL ASS£MBL Y
BY OTHERS
APPLY SEALANT AS RfQU/RED
BY OTHERS
BASE
CRAN ECOM POSITES. COM
VAR/£TEX OECORA nVE FRP PANEL
GYPSUM BOARD OR OTHER WALL
BY OTHERS
APPLY SEALANT ASREQUIRED
BY OTHERS
CONnNUE FRP PANEL 1/2" BELOW TOP OF nL£
nLE BACKER BOARD
BY OTHERS
TILE COVE BASE AND FLOORING
BY OTHERS
FLOOR ASSEMBLY
BY OTHERS
WE BELIEVE ALL INFORMATION IS ACCURATE. IT IS OFFERED IN GOOD FAITH, BUT WITHOUT GUARANTEE. SINCE
CONDITIONS OF USE ARE BEYOND OUR CONTRO;L, ALL RISKS ARE ASSUMED BY THE USER. NOTHING HEREIN
SHALL BE CONSTRUED AS A RECOMMENDATION FOR USES WHICH INFRINGE ON VALID PATENTS OR AS EXTENDING
A LICENSE UNDER VALID PATENTS. SEE OUR MOST CURRENT SOS AT CRANECOMPOSITES.COM PRIOR TO
WORKING WITH OUR PRODUCTS.
L <J LI
BASE
VAR/£TEX OECORAnVE FRP PANEL
GYPSUM BOARD OR OTHER WALL
BY OTHERS
CONnNUE FRP PANEL 2• AFF
VINYL COVE BASE
BY OTHERS
FLOORING
BY OTHERS
FLOOR ASScMBL Y
BY OTHERS
CRANE DECORATIVE FRP PANELS DETAILS
THIS DRAWING IS CREATED ON A 17 "xl 7" FORMAT
FLOOR/BASE
A-3
GYPSUM BOARD OR OTHER WALL
BY OTHERS
VARIETEX DECORA nVE FRP PANEL
OOOR OR WINDOW TRIM
BY OTHERS
7 CRANE CAP (CP) AROUND DOOR OR DOOR TRIM TYP
CRANE OUTSIDE CORNER TRIM (OC) TYP
VARIETEX DECORA nVE FRP PANEL
WALL ASSEMBLY
BY OTHERS
DETAIL
VARIETEX DECORA nVE FRP PANEL
WALL ASSEMBLY
BY OTHERS
WALL ASSEMBLY
e,mcm,�
WALL ASSEMBLY
BY OTHERS
CRANE INSIDE CORNER TRIM (IC} TYP
VARIETEX DECORA nVE FRP PANEL
GYPSUM BOARD OR OTHER WALL
BY OTHERS
/
CRANE DIVISION BAR TRIM (DB) TYP
VARIETEX DECORA nVE FRP PANEL
DETAIL
WINDOW TRIM DETAIL DETAIL
o 12/04/19 ISSUE DATE
NO. DATE REVISIONS
PFS
BY CHK APP'D
CRAN ECOMPOSITES .COM
WE BELIEVE ALL INFORMATION IS ACCURATE. IT IS OFFERED IN GOOD FAITH, BUT WITHOUT GUARANTEE. SINCE
CONDITIONS OF USE ARE BEYOND OUR CONTRO;L, ALL RISKS ARE ASSUMED BY THE USER. NOTHING HEREIN
SHALL BE CONSTRUED AS A RECOMMENDATION FOR USES WHICH INFRINGE ON VALID PATENTS OR AS EXTENDING
A LICENSE UNDER VALID PATENTS. SEE OUR MOST CURRENT SOS AT CRANECOMPOSITES.COM PRIOR TO
WORKING WITH OUR PRODUCTS.
CRANE DECORATIVE FRP PANELS DETAILS
THIS DRAWING IS CREATED ON A 71"x77" FORMAT
TRIM_DETAILS
A-4
L_
0 12/04/10 ISSUE llAlE
NO. DATE
PFS
REVISIONS BY CHK APP'D
7
A4
r@@@ A3A3A3
CRANE VARIETEX DECORATIVE FRP PANEL
n-- CRANE CAP (CP)
LJ I � = - ,,,,Ff,,..
[ d)
� wm "'"""" c,cmrns
�NE o7:s/ON BAR TRIM (DB) @
CRANECOM POSITES.COM
WE BELIEVE ALL INFORMATION IS ACCURATE. IT IS OFFERED IN GOOD FAITH, BUT WITHOUT GUARANTEE. SINCE
CONDITIONS OF USE ARE BEYOND OUR CONTRO;L, ALL RISKS ARE ASSUMED BY THE USER. NOTHING HEREIN
SHALL BE CONSTRUED AS A RECOMMENDATION FOR USES WHICH INFRINGE ON VALID PATENTS OR AS EXTENDING
A LICENSE UNDER VALID PATENTS. SEE OUR MOST CURRENT SOS AT CRANECOMPOSITES.COM PRIOR TO
WORKING WITH OUR PRODUCTS.
WALL
BY OTHERS
1/8" EXPANSION GAP
CRANE CAP (CP} TYP
VARIETEX DECORATIVE FRP PANEL
WAINSCOT _DETAILS
A-5
CRANE DECORATIVE FRP PANELS DETAILS
THIS DRAWING IS CREATED ON A 11"x17" FORMAT
