Kyron MAX Sales E-mail Overview 9-22-14 [Read-Only]...2018/02/28 · Kyron MAX “XS” Series -...
Transcript of Kyron MAX Sales E-mail Overview 9-22-14 [Read-Only]...2018/02/28 · Kyron MAX “XS” Series -...
-
www.piperplastics.com
-
- Piper Plastics Inc. Confidential -
© 2014 Solvay Specialty
Polymers
2
Injection Molding
Lay-upComposites
Kyron MAX Ultra Strength Polymers Bridge the Gap
Between Conventional Injection Moldable Filled Polymers and
Expensive Lay-up Composites
Kyron MAX Ultra Strength Polymers
-
- Piper Plastics Inc. Confidential -
Lay-up & Compression Molded Composites
The inherent shear planes in lay-up and compression molded composites result
in non-isotropic properties, shear fracture risk and structural damage due to
delamination
-
- Piper Plastics Inc. Confidential -
Delamination / Fracture Concerns
Delamination of conventional lay-up composites
-
- Piper Plastics Inc. Confidential -
Kyron MAX Summary
-
- Piper Plastics Inc. Confidential -
Kyron MAX “S” Series
-
- Piper Plastics Inc. Confidential -
Tensile Comparison vs. Fiber Technology
PA 66 PPA PEI PEEK
30% Glass Fiber 27500 25100 25100 25000
30% Carbon Fiber 35000 41000 31000 36000
30% KyronMax Fiber 47200 55600 40300 48700
0
10000
20000
30000
40000
50000
60000
Te
ns
ile
Str
en
gth
, p
si
Tensile strength comparison using the same fiber loading
-
- Piper Plastics Inc. Confidential -
Kyron MAX “ES” Series
-
- Piper Plastics Inc. Confidential -
KyronMAX ES Series
ES-9255 ES-9155
Conductive Non-Conductive
Tensile Strength 70,000 42,000
Tensile Modulus 7,700,000 4,620,000
Flexural Strength 80,000 48,000
Flexural Modulus 7,000,000 4,200,000
Compression Strength 61,000 36,600
Surface Resistivity < 102 > 1013
Volume Resistivity < 102 > 1013
Density 1.62 1.7
Specific Strength - Tensile 43,000 24,706
-
- Piper Plastics Inc. Confidential -
Kyron MAX “XS” Series
-
- Piper Plastics Inc. Confidential -
KyronMAX XS Series
XS-9260 XS-9160
Conductive Non-Conductive
Tensile Strength 122,000 88,000
Tensile Modulus 8,500,000 3,000,000
Flexural Strength 133,000 92,800
Flexural Modulus 8,100,000 3,080,000
Compression Strength 84,600 89,000
Compression Modulus 8,100,000 3,000,500
Poisson's Ratio 0.33 0.29
Surface Resistivity < 102 > 1013
Volume Resistivity < 102 > 1013
Density 1.79 1.7
Specific Strength - Tensile 68,150 51,800
-
- Piper Plastics Inc. Confidential -
KyronMAX XS-9260 Example
KyronMAX XS
Molded ¼”-20 Bolt
Tensile tested to determine
maximum load strength
Results
1,200 lb Tensile strengthNon Conductive Material KyronMAX XS-9160
1,800 lb + Tensile StrengthConductive Material (XS-9260)
0
1300
150
300
450
600
750
900
1050
1200
Fo
rce
(lb
f)
0 0.10.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09
Stroke(in)
Max
-
Questions?
www.piperplastics.com