KW Hydraulic Tools

by

Adnan F. H. Sabbubeh

ABDAR AL-RIYADH

FOR TRADING

HS-85-G

• HS-85-G – Hydraulic Cable Cutterfor steel armed copper and aluminum cableincl. steel case, green (RAL6018)Diameter: 85 mmCutting force: 60 kN

ABDAR AL-RIYADH

FOR TRADING

KT-52 / KT-62-HD

• Ratched Cable Cutters Series KT

extreme solid

KT-52 up to 52 mm (one hand operated)KT-62-HD up to 62 mmKT-80 up to 80 mm

ABDAR AL-RIYADH

FOR TRADING

K-xxxxxxxxxxABDAR AL-RIYADH

FOR TRADING

Ratched cable cutters with special function

• For cutting single-strand, multi-strand and fine-wire aluminium and copper cables• Also for lead-coated cables (only D60 and D100)• Ratchet action for high cutting performance• Telescope arms adjust to a range of lengths• Cutter can be opened in any cutting position• Can be used in cramped situations as well as overhead• Not for steel wire or wire cable

• SSA-95-S-FHP-M – Hydraulic Life Line Cable CutterFor mild steel sheet armed copper and aluminum cablelow and medium voltage10 meter insulated hydraulic hoseone earth bond unitsteel case, green (RAL6018)

SSA-120-G-FHP-MABDAR AL-RIYADH

FOR TRADING

SSA-120-G-FHP-M

• SSA-120-G-FHP-M – Hydraulic Life Line Cable CutterFor steel armed copper and aluminum cable10 meter insulated hydraulic hoseone earth bond unitsteel case, green (RAL6018)

ABDAR AL-RIYADH

FOR TRADINGSSA-120-G-FHP-M

ABDAR AL-RIYADH

FOR TRADING

SA-120-G-SET-EHP-SE

• SA-120-G-SET-EHP-SE

- S-120-G – Cable Cutter with fixed 10 meter insulated hydraulic hose (700BAR)- EHP-SE-V230/60Hz-700BAR – electric hydraulic pump with remote control- earth bond (1x)- steel case, green (RAL6018) for cutter with hose (KOFFER-SSA-GRÜN)

ABDAR AL-RIYADH

FOR TRADING

SA-160-G-SET-EHP-SE

• SA-160-G-SET-EHP-SE

- S-160-G – Cable Cutter with fixed 10 meter insulated hydraulic hose (700BAR)- EHP-SE-V230/60Hz-700BAR – electric hydraulic pump with remote control- earth bond (1x)- steel case, green (RAL6018) for cutter with hose (KOFFER-SSA-GRÜN)

ABDAR AL-RIYADH

FOR TRADING

HP-131-C38-SET-KSA

Incl. 11 x

• HP-131-C38-SET

- HP-131-C38– Hand operated hydraulic crimping tool, 130 kN, opening jaw 38mm- incl. 11 hexagonal dies, acc. DIN46235 (25-300 mm² CU / 25-300 mm² AL)

Crimping Width 14 mm, DIN-Sizes: 10, 12, 14, 16, 18, 20, 22, 25, Crimping Width 5 mm, DIN-Sizes: 28, 32Crimping Width 7 mm, DIN-Sizes: 34

- metal carrying case, green (RAL6018) for dies and tool

o Ideally suited for assembly work.

Not recommended for mass assembly

o Rotary and opening crimping head

o Two-stage hydraulic system reducing

the number of pumping

o NEW! Piston with mechanical stop.

This system prevents damage to the

holder of the insets, in case of

accidental use without insets

o Using with semi-circular dies common to

all 120/130 kN tools

o Extreme large range of crimping dies

o Automatic pressure relief control

o Manual backflow anytime possible

ABDAR AL-RIYADH

FOR TRADING

P-131-C38-SET-FHP-M

• P-131-C38-SET-FHP-M – Hydraulic Crimping Head, 130 kN- incl. 11 hexagonal dies, acc. DIN46235 (25-300 mm² CU / 25-300 mm² AL)

Crimping Width 14 mm, DIN-Sizes: 10, 12, 14, 16, 18, 20, 22, 25Crimping Width 5 mm, DIN-Sizes: 28, 32Crimping Width 7 mm, DIN-Sizes: 34

- metal transport case, green RAL6018- Plastic case for the dies- FHP-2-M – Foot Operated Hydraulic Pump with gauge

- 3 meter hydraulic hose with quick coupler

Incl. 11 x

ABDAR AL-RIYADH

FOR TRADING

P-230-SET-FHP-M

14 xAcc. DIN

• P-230-SET-FHP-M – Hydraulic Crimping Head, 230 kN- incl. 14 hexagonal dies acc. DIN46235 (25-630 mm² CU / 25-500 mm² AL)

Crimping Width 14 mm DIN-Sizes: 10, 12, 14, 16, 18, 20, 22, 25, 28

Crimping Width 17 mm DIN-Sizes: 32, 34, 38, 42, 44- metal transport case, green RAL6018- FHP-2-M – Foot Operated Hydraulic Pump with pressure gauge- 3 meter hydraulic hose with quick coupler

High flexible steel armed hose up to 1400 BAR

+ Less pumping = this hose does not blow up+ flexible � radius under 20 cm� very long life, much better than the types before

ABDAR AL-RIYADH

FOR TRADING

P-230-SET-EHP

• P-230-SET-EHP – Hydraulic Crimping Head, 230 kN at 700 bar- incl. 14 hexagonal dies acc. DIN46235 (25-630 mm² CU / 25-500 mm² AL)

Crimping Width 14 mm DIN-Sizes: 10, 12, 14, 16, 18, 20, 22, 25, 28

Crimping Width 17 mm DIN-Sizes: 32, 34, 38, 42, 44- metal transport case, green RAL6018- SCHL3M-KN – 3 meter hydraulic hose with quick couplers- EHP-SE-220V/60Hz-700BAR – Electric Hydraulic Pump with remote control

High flexible steel armed hose up to 1400 BAR

+ Less pumping = this hose does not blow up+ flexible � radius under 20 cm� very long life, much better than the types before

ABDAR AL-RIYADH

FOR TRADING

P-540-SET-EHP

High flexible steel armed hose up to 1400 BAR

+ Less pumping = this hose does not blow up+ flexible � radius under 20 cm� very long life, much better than the types before

• P-540-SET-EHP – Hydraulic Crimping Head, 540 kN at 850 bar- incl. 9 hexagonal dies acc. DIN46235 (240-1000 mm² CU / 240-1000 mm² AL)

Crimping Width 14 mm DIN-Sizes: 28

Crimping Width 17 mm DIN-Sizes: 32, 34, 38, 42, 44, 52, 58, 60- metal transport case, green RAL6018- SCHL5M-KN – 5 meter hydraulic hose with quick couplers- EHP-SE-220V/60Hz-850BAR – Electric Hydraulic Pump with remote control

ABDAR AL-RIYADH

FOR TRADING

P-695-SET-EHP

High flexible steel armed hose up to 1400 BAR

+ Less pumping = this hose does not blow up+ flexible � radius under 20 cm� very long life, much better than the types before

• P-695-SET-EHP – Hydraulic Crimping Head, 600 kN at 850 bar- incl. 5 hexagonal dies acc. DIN46235 (630-1200 mm² CU / 630-1200 mm² AL)

Crimping Width 25 mm DIN-Sizes: 44, 52, 58, 60, 62- metal transport case, green RAL6018- SCHL5M-KN – 5 meter hydraulic hose with quick couplers- EHP-SE-220V/60Hz-850BAR – Electric Hydraulic Pump with remote control

ABDAR AL-RIYADH

FOR TRADING

P-1095-SET-EHP

High flexible steel armed hose up to 1400 BAR

+ Less pumping = this hose does not blow up+ flexible � radius under 20 cm� very long life, much better than the types before

• P-1095-SET-EHP – Hydraulic Crimping Head, 1000 kN at 850 bar- incl. 5 hexagonal dies acc. DIN46235 (630-1200 mm² CU / 630-1200 mm² AL)

Crimping Width 25 mm DIN-Sizes: 44, 52, 58, 60, 62- metal transport case, green RAL6018- SCHL5M-KN – 5 meter hydraulic hose with quick couplers- EHP-SE-220V/60Hz-850BAR – Electric Hydraulic Pump with remote control

ABDAR AL-RIYADH

FOR TRADING

P-1114-SET-EHP

High flexible steel armed hose up to 1400 BAR

+ Less pumping = this hose does not blow up+ flexible � radius under 20 cm� very long life, much better than the types before

• P-1114-SET-EHP – Hydraulic Crimping Head, 1000 kN at 850 bar- incl. 14 hexagonal dies acc. DIN46235 (1200-2500 mm² CU / 1200-2500 mm² AL)

Crimping Width 25 mm DIN-Sizes: 62, 70, 76, 80, 82- metal transport case, green RAL6018- SCHL5M-KN – 5 meter hydraulic hose with quick couplers- EHP-SE-220V/60Hz-850BAR – Electric Hydraulic Pump with remote control

ABDAR AL-RIYADH

FOR TRADING

P-1114-SET-EHP

Adapter for IZUMI dies

ABDAR AL-RIYADH

FOR TRADING

FHP-2-M-SET

• FHP-2-M-SET - Food Operated Hydraulic Pump, 700 bar - with quick coupler- with pressure gauge- with SCHL3M-KN – 3 Meter hydraulic hose with quick couplers- with steel case

ABDAR AL-RIYADH

FOR TRADING

EHP-850-SE-230V/60Hz

• EHP-850-SE-220V/60Hz-700BAR – Electric Powered Hydraulic Pump, 850 barEngine: 220 Volt / 60 Hz, 1100 Wattwithout remote control, without hose

• EHP-850-SE-220V/60Hz-700BAR – Electric Powered Hydraulic Pump, 850 barEngine: 220 Volt / 60 Hz, 1100 Wattwithout remote control, without hose

Do not forget to order accessories:

• FB-1 – Hand Cable Remote Control

• FS-1 – Foot Cable Remote Control

• SCHL3M-KN – 3 meter steel armored hydraulichose with quick coupler

ABDAR AL-RIYADH

FOR TRADING

Cable StripperABDAR AL-RIYADH

FOR TRADING

Cable StripperABDAR AL-RIYADH

FOR TRADING

Cable Stripper

UNICUT – CABLE STRIPPER

• Unicut-30 30-85 mmTransport case, peeling blade, 2 stripping blades 30 mm / 18 mm, chamfer blade, guard plate, case for blades and material, user manual

• Unicut 40 70-125 mmTransport case, peeling blade, 2 stripping blades 38 mm / 18 mm, chamfer blade, guard plate, case for blades and material, user manual

• Unicut 50 110-185 mm (in construction � 2018)Transport case, peeling blade, 2 stripping blades 38 mm / 18 mm, chamfer blade, guard plate, case for blades and material, user manual

UNIPOWER-34 – Engine for UNICUT

Helps to make a smooth surface by long peeling areas.

ABDAR AL-RIYADH

FOR TRADING

Cable Grinding

Cable sanding machineApplication

The cable sanding machine is applied to sand the insulationsurface of polymer cables.Technical Data

* Rated Voltage: 220/230 V 50/60 Hz* Rated power: 500 W* Engine adjustable speed: 1000 – 2000 / minScope of delivery

* Cable sanding machine* Spanner wrench M 17* Technical document (various languages)* Safety instruction (various languages)* List of spare parts (English, German and French)* Packaging, plastic toolbox (51 x 26 x 25 cm)

Ordering information

Part no Type Description Weight (kg)

88964 UPC 2-R Cable sanding machine 8.0Additional tools (to be ordered separately)

Part no Type Description

76094 150 Emery papers, Width 29 mm76095 180 Emery papers, Width 29 mm76096 220 Emery papers, Width 29 mm76098 320 Emery papers, Width 29 mm62371 400 Emery papers, Width 29 mm

Spare parts

Part no Description

78867 Driving mechanism78868 Holder with rollers78869 Mechanical drive with handle bar

Cable and Screen preparation

ABDAR AL-RIYADH

FOR TRADING

KW Hydraulik GmbHHydraulikaggregate und Werkzeuge

Koeppelsdorfer Str. 132

96515 Sonneberg

Germany

Tel. +49 3675 42198 0

info@kw-hydraulik.de

www.kw-hydraulik.de

ABDAR AL-RIYADH EST.FOR TRADING

AL-KHALEEJ CENTER, 1ST FLOOR

SHOW ROOM NO.74

KING FAHIRD ROAD, OLAYA

RIYADH SA 11533

Info@abdaralriyadh.com

www.abdaralriyadh.com

Phone +966 11 4161482

Fax: +966 11 4629122

Mobile: +966 505 233 618

KINGDOM OF SAUDI ARABIA

ABDAR AL-RIYADH

FOR TRADING