KUBOTA ULTRA-COMPACT EXCAVATOR K K008 -3For sheer productivity, no other ultra-compact excavator...
Transcript of KUBOTA ULTRA-COMPACT EXCAVATOR K K008 -3For sheer productivity, no other ultra-compact excavator...
*This information is sourcedfrom overseas and may notnecessarily apply locally.It is essential that you confirmspecifications and otherinformation with your localKubota dealer.
K K008-3Spacious, comfortable, and more productive, yet it fits in the tightest spaces.The K008-3 sets the standard for all ultra-compact excavators.
K U B O T A U L T R A - C O M P A C T E X C A V A T O R
For sheer productivity, no other ultra-compact excavator measures up to
the K008-3. By upgrading it in the essential areas of performance,
durability, serviceability, and comfort, the spacious K008-3 outperforms
the competitors in a wide range of construction and building work.
Kubota raises the bar again with the spacious K008-3 ultra-compact excavator.
K008-3
Improved hose and boom cylinder protectionAll the hydraulic hoses hidden within the boom anddipper arm. With the cylinder mounted on top of theboom, the K008-3 increases service life by offeringoutstanding protection from damage.
Protected bucket hosesBy running inside the dipper arm,the bucket hoses are also wellprotected from damage.
Complies
with Tier IV!
Powerful and dependable, the K008-3’s diesel
engine delivers superior horsepower and
performance. It offers low noise and vibration
levels, exceptional fuel efficiency, and complies with
the U.S. EPA’s 2008 Tier IV emissions regulations.
Clean-runningKubota Engine
Handy toolboxTo help you perform basicmaintenance, the K008-3comes complete with atoolbox conveniently locatedunder the operator’s seat.
Coolant temperature gaugeThe new coolant temperature gauge helps prevent theengine from overheating by keeping you informed.Located close to the control levers, a warning lamp lightsup when the coolant temperature rises to 115 degrees,and turns off when it falls to 108 degrees or below.
TPSSAllows the operator to chooseeither ISO or SAE controlpatterns. Requires approximately5 minutes to make the minormechanical change.
Straight wall trenchingEquipped with a swing angle of up to 60 degrees, theK008-3 lets you dig a straight trench along any wall.
K008-3
Protected auxiliary hoses
By routing its auxiliary hydraulic hosesthrough the boom, the K008-3 nolonger requires lengthy hoses whenconnecting your implements.Furthermore, a shorter hose lengthgreatly reduces the risk of snaggingand causing damage.
Comfortable operator’s seatWell padded and contoured,you’ll truly appreciate the comfortof its operator’s seat, especiallyduring long days of operation.
Fast and easy maintenanceA full-open bonnet and newengine layout makes dailyinspection and maintenance ofessential components a snap.Both features now provide youwith easy access to the radiator,battery, coolant, fuel filter, anddual-element air-cleaner.
Two-speed travelNeed to make up time? Step on theK008-3’s hi-speed pedal, and you’llmaneuver around job sites fasterthan any other compact excavatorin its class.
195 m
360 mm
Two-way leverLocated within easy reach, it letsyou switch between control of theblade or the adjustable track width.
With increased space in the operator’sarea, you’ll get the job done fasterand in comfort.
860 mm
700 mm
1,375 mm
Reliable Kubota E-TVCSengineSuper dependable andefficient, the combustioncreated by our engine’s uniqueThree Vortex CombustionSystem reduces exhaustemission, noise, and vibration.
345 mm
Adjustable width track frameTo enable passage through narrow spaces such asdoorways and gates, the adjustable width track framecan reduce the K008-3’s track width down to 700 mmby simply operating a single lever. Plus, changing theblade width is as easy as removing one pin by hand.
Pedal-operated boom swingA convenient toe-heel pedal lets youeasily operate the boom swing.
1,715 mm
mm
Spacious operator’s areaYou’ll find it more comfortablebehind the operating levers of the
K008-3. That’s because we’vegenerously increased the space
between the operating leversand the operator’s seat, and
lengthened the floorboards.
Swing bracket pin bushingsTo increase life of components,swing bracket pins have bushings.
Wider working rangeFor maximum productivity, itsdigging/dumping heights,digging depths, and diggingradius at ground level have allbeen increased.
W O R K I N G P E R F O R M A N C E
©2007 Kubota Corporation
KUBOTA Tractor Australia Pty LtdFreecall: 1800 334 653Email: [email protected]
Web Site: http://www.kubota.com.au
Model
Type of tracks
Model
K008-3
Rubber
Kubota D722-E3
10.1 (7.5) / 2050
719
2750
2230
860 / 700
150
21.0
21.0
1000
460
2.0 / 4.0
770
900
1230
180
0.25
55
60
700 / 860
200
200
180
12.5 / 17.0
12.0
8.3
Output (SAEJ 1349 net)
Displacement
Crawler length
Shoe width
Max. lift above ground
Max. drop below ground
Ground contact pressure
Overall length
Overall height
Overall width
Min. ground clearance
Pump capacity
Hydraulic oil (reservoir/system)
Fuel reservoir
Operating weightIncluding operator’s weight 80 kg.
Auxiliary hydraulic flow
Max. breakout force
Unit swing speed
Tumbler distance
Blade
Bucket
Arm
Travel speed
Max. traction force
Left
Right
Width
Height
HP (kW)/rpm
10.3 (7.7) / 2050Output (SAEJ 1995 gross) HP (kW)/rpm
cc
mm
mm
mm
mm
l/min
l/min
kgf
kgf
km/h
kgf
mm
mm
mm
kgf/cm2
rpm
degree
degree
mm
mm
1000kgs
mm
mm
l/min
l/min
*Specifications are subject to change without notice for purpose of improvement.
Boom swing angle
Dimensions
Engine
Dimensions
Hydraulicsystem
Drivesystem
Swingsystem
Blade
G H
AD
CB
EF
1790
w/ROPS Bar800
700860
700
860
2230
750
LIFTPOINT
HEIGHT(m)
GL
LIFTING CAPACITYOVER-FRONTBLADE DOWN
LIFT POINT RADIUS (m)unit=ton
LIFTING CAPACITYOVER-FRONT
BLADE UP
LIFT POINT RADIUS (m)unit=ton
LIFTING CAPACITYOVER-SIDE
LIFT POINT RADIUS (m)unit=ton
Machine with ROPS canopy and rubber crawler, without bucket
1.8
1.2
0.6
0
1.2
-
-
0.54
0.55
1.8 2.5
0.20
0.23
0.30
0.31
-
0.21
0.21
0.19
MAX
-
0.20
0.19
0.17
1.2
-
-
0.36
0.32
1.8 2.5
0.20
0.21
0.19
0.18
-
0.13
0.13
0.12
MAX
-
0.12
0.11
0.11
1.2
-
-
0.28
0.25
1.8 2.5
0.17
0.17
0.16
0.14
-
0.10
0.10
0.10
MAX
-
0.10
0.09
0.09
Max. digging height
Max. dumping height
Max. digging depth
2870
2035
1715
1375
3025
3075
1120
955
750
Max. vertical digging depth
Max. digging radius @ ground
Max. digging radius
Min. tail turning radius
mm
mm
mm
mm
mm
mm
mm
mm
mm
W/o swing
With swing
The company reserves the right to change the above specifications without notice. This brochure is for descriptive purpose only. Please contact your local Kubota dealer for warranty infomation. For your safety, Kubota strongly recommends the use of a Rollover Protective structure (ROPS) and seat belt almost all applications.
A
B
C
D
E
F
G
H
Min. turning radius
Unit: mm
KUBOTA ULTRA-COMPACT EXCAVATOR
DIMENSIONSSPECIFICATIONS
WORKING RANGELIFTING CAPACITY
Cat. No.8749-01-AA Printed in Japan '08-1D. ◇2 2