KRUSE ENERGY AUCTIONEERS VIRTUAL AUCTION …

KRUSE ENERGY AUCTIONEERS VIRTUAL AUCTION

SEPTEMBER 16-17, 2021 TABLE OF CONTENTS

YARD REFERENCE i

DAY 1

1 COMPOSITE CATALOGS 1

6 WELDING EQUIPMENT 1

14 TOOL RACKS / BASKETS 2

40 WELL CONTROL 4

142 HANDLING TOOLS 12

262 SAFETY VALVES 20

304 CUTTERS / SCRAPERS 23

351 MAGNETS / IMPRESSION BLOCKS 26

378 SPEARS / OVERSHOTS 28

560 JUNK BASKETS 43

598 MILLS 46

812 WASHPIPE 64

988 MISC FISHING TOOLS & RACKS 80

DAY 2

1100 CONSTRUCTION 87

1135 PICKUPS 95

1146 TRAILERS 96

1199 CRANE / CRANE TRUCKS /

RIG-UP TRUCKS 103

1211 FRAC HEATERS / FRAC PUMPERS /

FRAC EQUIPMENT 105

1253 NITROGEN /

COILED TUBING EQUIPMENT 115

1338 2009 1500 HP SCR WALKING-DRILLING

RIG (RIG 326) 129

1355 1500 HP SCR SKIDDING-DRILLING RIG

(RIG 322) 132


(RIG 323) 136

1382 NATIONAL OILWELL 1500 HP SCR

DRILLING RIG (RIG 306) 139

1414 1700 HP SCR DRILLING RIG (RIG 308) 143

1450 2012 1500 HP SCR SKIDDING-DRILLING

RIG (RIG 124) 147

1460 2011 1500 HP SKIDDING-DRILLING RIG

(RIG 116) 149

1474 1996 CITATION 1000 HP SCR MOBILE

DRILLING RIG 153

1475 WILSON 75 PARTIAL DRILLING RIG (R1) 153

1487 GENSETS / MUD PUMPS /

DRILLING COMPONENTS 155

1547 CASING / HANDLING TOOLS 160

1570 DRILL PIPE / DRILL COLLARS 161

1819 STABILIZERS 181

1866 MAST UNIT / ENGINES /

PRODUCTION EQUIPMENT 184

FEATURED EVENT CATALOG 191

K NUMBER CROSS REFERENCE 284


SEPTEMBER 16-17, 2021 YARD REFERENCE

ALL ITEMS SOLD AS-IS, WHERE-IS. ALL SALES FINAL. i

1 Kruse Energy - OKC 6501 SW 44th Street Oklahoma City, OK 73179 Contact: Lance Cross Phone: 405.596.4998 Email: [email protected] MUST call in advance to schedule pick up. Checkout: Sept. 16th thru Sept. 30th M-F, 8-4; Loadout Available Call to Confirm 2 Kruse Energy - Midland 509 E CR 120 Midland, TX 79706 Contact: Tamara Casteel Phone: 432.813.9690 Email: [email protected] MUST call in advance to schedule pick up. Checkout: Sept. 16th thru Sept. 30th M-F, 8-4; Loadout Available Call to Confirm 3 Rainbow Fishing & Rental Tools 12 Donald Drive Laurel, MS 39440 Contact: Roy Wyrick or Jerry Phone: 601.422.5518 or 601.498.0163 Email: [email protected] MUST call in advance to schedule pick up. Checkout: Sept. 16th thru Sept. 30th M-F, 8-4;Loadout Available $50 per hour - 1 hour minimum 4 Ritchie Bros Auctioneers (America) Inc 5589 141st Ave NW Williston, ND 58801 Contact: Jesse Bettencourt Phone: 701.690.2296 Email: [email protected] MUST call in advance to schedule pick up. Checkout: Sept. 16th thru Sept. 30th M-F, 8-4

5 Ritchie Bros Auctioneers (America) Inc 4444 Ritchie Dr Longmont, CO 80504 Contact: Brittany Mondragon Phone: 303.589.7456 Email: [email protected] MUST call in advance to schedule pick up. Checkout: Sept. 16th thru Sept. 30th M-F, 8-4 6 Gravity - Artesia Yard 6551 Seven Rivers Hwy Artesia, NM 88210 Contact: Michael Steed Phone: 575.736.1030 MUST call in advance to schedule pick up. Checkout: Sept. 16th thru Sept. 30th M-F, 8-4 7 Gravity - Pecos Yard 32 County Road 203 Pecos, TX 79772 Contact: Brian Fuentes Phone: 432.447.0851 MUST call in advance to schedule pick up. Checkout: Sept. 16th thru Sept. 30th M-F, 8-4 8 Unit Drilling 16531 E. Oklahoma Ave. Wheeler, TX 79096 Contact: Brandon Field Phone: 405.227.2336 Email: [email protected] Checkout BY APPOINTMENT ONLY: Sept. 16th thru Sept. 30th 9 Unit Drilling 24-42 Basco Ave Farson, WY 82932 Contact: Brandon Field Phone: 405.227.2336 Email: [email protected] Checkout BY APPOINTMENT ONLY: Sept. 16th thru Sept. 30th



ALL ITEMS SOLD AS-IS, WHERE-IS. ALL SALES FINAL. ii

10 Washita Valley Enterprises - Unit Drilling 10151 County Rd 1060 Hydro, OK 73048 Contact: Brandon Field Phone: 405.227.2336 Email: [email protected] Checkout BY APPOINTMENT ONLY: Sept. 16th thru Sept. 30th 11 Ike Liotto 8227 HWY 22 Saint Amant, TX 78011 Contact: Ike Liotto Phone: 225.270.8356 MUST call in advance to schedule pick up. Checkout: Sept. 16th thru Sept. 30th M-F, 8-4 12 Hollowhawk Oilfield Services 2827 W 2000 S Roosevelt, UT 84066 Contact: Orlando Zubiate Phone: 432.823.1858 MUST call in advance to schedule pick up. Checkout: Sept. 16th thru Sept. 30th M-F, 8-4 13 Virtue Oilfield Rentals LLC 3604 FM 1936 Odessa, TX 79764 Contact: Skip Parkey Phone: 432.557.8680 Checkout BY APPOINTMENT ONLY: Sept. 16th thru Sept. 30th 14 Judy Wells 326 CR 121 Sweetwater, TX 79556 Contact: Judy Anderson Phone: 903.421.6718 Checkout BY APPOINTMENT ONLY: Sept. 16th thru Sept. 30th; BUYER RESPONSIBLE FOR LOADOUT.

15 Bunning Trucking - Unit Drilling 1600 Elk St Rock Springs, WY 82901 Contact: Bunning Trucking Phone: 307.362.3791 Checkout BY APPOINTMENT ONLY: Sept. 16th thru Sept. 30th 16 Westridge Drilling 509 Pickett Mineral Wells, TX 76068 Contact: G.C. Broadus Phone: 817.247.4329 Checkout BY APPOINTMENT ONLY: Sept. 16th thru Sept. 30th; Load Out Available for a Fee up to #12,000’s: $100.00/Hour with a $50.00 Minimum, and forklift for loadout only available through Sept. 30th, this excludes Items 5461990, 5461994, 5461995, & 54619 17 Pioneer Natural Resources - King Yd Pin Drop - Near SCR 1101 Midland, TX 79706 Contact: Hector Martinez Phone: 432.571.3377 Email: [email protected] MUST call in advance to schedule pick up. Checkout: Sept. 16th thru Sept. 30th M-F, 9-3 18 Pioneer Natural Resources - Hwy 80 Yd 4815 E HWY 80 Midland, TX 79706 Contact: Krista Erives Phone: 432.269.2097 Email: [email protected] MUST call in advance to schedule pick up. Checkout: Sept. 16th thru Sept. 30th M-F, 9-3 19 Pioneer Natural Resources - HWY 80 WH Yd 2011 NCR 1140 Midland, TX 79705 Contact: Chris Cornwell Phone: 432.214.6295 Email: [email protected] MUST call in advance to schedule pick up. Checkout: Sept. 16th thru Sept. 30th M-F, 9-3



ALL ITEMS SOLD AS-IS, WHERE-IS. ALL SALES FINAL. iii

20 Pioneer Natural Resources - Curlew Yd Pin Drop - E County Rd 180 Midland, TX 79706 Contact: Hector Martinez Phone: 432.571.3377 Email: [email protected] MUST call in advance to schedule pick up. Checkout: Sept. 16th thru Sept. 30th M-F, 9-3 21 McBride Operating 4010 Water View Longview, TX 75605 Contact: Joe McBride Phone: 903.746.7698 Ext. 0 Email: [email protected] MUST call 24 hours in advance to schedule pick up. Checkout: Sept. 16th thru Sept. 30th M-F, 8-4


SEPTEMBER 16-17, 2021 LOT LOC TITLE LOT LOC TITLE

ALL ITEMS SOLD AS-IS, WHERE-IS. ALL SALES FINAL. 1

DAY 1

COMPOSITE CATALOGS

Choice of 5 - Lots 1-5 1 3 A Composite Catalog of Oil Field

Equip 1958 - 59 Vol 1&2 K#: K015416

2 3 A Composite Catalog of Oil Field

Equip 1968 - 69 Vol 1,2&3 K#: K015417


Equip 1974 - 75 Vol 1&3 K#: K015418


Equip 1984-85 Vol 1&4 K#: K015415

5 3 A Composite Catalog OF Oilfield

Equip. & Services 1978-79 (A-Z) Vol1-4, 1988-89 (A-Z) Vol 1-3, 1984-85 D-H Vol2 K#: K29207

WELDING EQUIPMENT 6 3 A Miller SRH-333 Arc Welder w/

Stand & Fridge w/ Rods & Misc. 220 3-Phase Unit w/ Leads, Comes with Various Type Welding Rods, Brazing Flux & More K#: K29170

Choice of 5 - Lots 7-11 7 3 A (2) 10Lb Boxes of Kutrite

Composite Rods; 3/16” x 1/8” K#: K29203

8 3 A (2) 10LB Boxes of Kutrite

Composite Rods; 1/8” x 1/6” K#: K29202

9 3 A (2) 10Lb Boxes of 1/4" Kutrite

Composite Rods K#: K29204

10 3 A (2) Nickle Silver Tinning Rods

+ Misc. Flux Coated 3/16”-18”, 10lb Boxes K#: K29205

11 3 A Misc. Tinning Rods

3 /32” x 36” Bronze (2) Boxes, Carbide 1/16” (2) Boxes, 18-30 Mesh Carbide (3 Boxes) K#: K29206

12 3 A Shop Built Smelting Pot/ Weld

Cooler 30’ DIA x 16’ Deep W/ Rents, Lid, Stack, & Legs K#: K27606

13 3 A Tweco Mig Welding Gun W/3

Spools of Wire (1) Full Spool (2) Partial Spools K#: K27100




TOOL RACKS / BASKETS

Choice of 8 - Lots 14-21 14 3 A Pioneer Expanded Metal Tool

Basket w/ Lift Eyes 2’-6” W x 8’ L x2’ H K#: K27607

15 3 A Rainbow Expanded Metal Parts

Basket 4’ W x 6’ L x2’ H K#: K27611

16 3 A Pioneer Expanded Metal Parts

Basket 3’ W x 8’ L x2’ H W/ Lifting Eyes K#: K27610


Basket W/ Lift Eyes 3’ W x 8’ L x2’ H K#: K27608


Basket W/ Lift Eyes 3’ W x 8’ L x2’ H K#: K27609

19 3 A Shop Built Expanded Metal

Parts Basket 3’ W x 4’ L x 2’ H W/ Lifting Eyes (Asset # RRF21219) K#: K27613

20 3 A 4'W x 6'L 2'H Expanded Metal Parts Basket K#: K27612

21 3 A Expanded Metal Basket W/

Thread Protectors 56" x 37" x 28"H K#: K23828

22 3 A QTY (2) Steel Storage Boxes

W/Steel Lids, 18”W x 18”L x 18”H K#: K24269

Choice of 8 - Lots 23-30 23 3 A QTY (2) Heavy Duty Steel

Inspection Table/Racks (1) 27”W x 99”L x 38”H & (1) 28”W x 94”L x 39”H K#: K27644

24 3 A QTY (1) Heavy Duty Steel

Inspection Table/Rack 48”W x 96”L x 37”H K#: K27645

25 3 A 6’H 2-Sided Grapple Rack

10’L w/ 10-Tiers & 7’L w/ 6-Tiers (Welded Together) K#: K015446

26 3 A 6’H x 12’L 2-Sided Grapple

Rack (Majority w/ 8-Tiers) K#: K015445




27 3 A 3’H x 5’6”W x 7’L 2-Tier Tool Rack w/ Black Bear 1-Ton Chain Hoist K#: K32251

28 3 A 2’6”H x 2’W x 12’L 2-Sided 32

Bay Tool Rack K#: K32254

29 3 A 2’6”H x 2’W x 12’L 2-Sided 24

Bay Tool Rack K#: K32253

30 3 A 5’H x 5’W x 12’L 3-Section Tool

Rack w/ Upper Mid Section K#: K32255

Choice of 9 - Lots 31-39 31 3 A 3’H x 4’W x 12’6”L 9-Bay Tool

Rack & 3’H x 6’W x 3’L Tool Rack w/ Chains K#: K32256

32 3 A (2) 3’H x 12’L x 5’W 3-Bay Tool

Racks w/ Chains K#: K015444

33 3 A 3’6”H x 2’8”W x 14’L Sub Rack/

Table w/ Chains K#: K015450

34 3 A 3’H x 3’W x 13’6”L 4-Bay Tool Rack w/ Chains K#: K32252

35 3 A 3’6”H x 3’W x 12’L Sub Rack

/Table w/ Chains & 3’H x 3’W 5-Tier Sub Rack K#: K015449

36 3 A 2’6”H x 3’W x 14’L 4-Bay Tool

Rack w/ Chains K#: K015447

37 3 A (3) Triangular Tool Racks w/

Chains 2’6”H x 6’L, 3’H x 6’L, & 3’H x 4’6”L K#: K015448

38 3 A 5-Tier Tool Rack & (2) Shelf

Units 3’H x 3’4” W Tool Rack, 6’H x 18”W x 16”L 3-Tier Grapple Shelf, & 3’H x 3’W x 18”L 4-Tier Steel Shelf K#: K32257

39 3 A (2) 7'H x 4'W x 2'Deep 5-Tier

Steel Caged Cabinets K#: K29198




WELL CONTROL 40 3 A Integrated MFG 11” x 5,000#

HYD Double B.O.P. Studded Top & Bottom, W/O Studs, W/ Blind and 3-1/2” Rams VIN/SN: A68-3 K#: K24559

Choice of 3 - Lots 41-43 41 3 A Integrated MFG 7-1/16” x

5,000# HYD Double B.O.P. Studded Top & Bottom, W/Studs on Bottom, W/O Rams, (1) 2” Plug Valve VIN/SN: 487058-1 K#: K24560

42 3 A Integrated MFG 7-1/16” x

5,000# HYD Double B.O.P. Studded Top & Bottom, W/Studs on Bottom, W/O Rams, (1) 2” Plug Valve VIN/SN: 489664-1 K#: K24562

43 3 A Integrated MFG 7-1/16” x

5,000# HYD Double B.O.P. S/N: A14-44, Studded Top & Bottom, W/Studs on Bottom, W/O Rams, (1) 2” Plug Valve VIN/SN: A14-44 K#: K24561

44 3 A QTY (2) Cameron QRC 11” x

5,000# HYD B.O.P.s Flanged Top & Bottom (Rams Unverifiable) K#: K24563

Choice of 5 - Lots 45-49 45 3 A 7” Integrated B.O.P. Complete

Ram Assembly F/ 11" 5M BOP K#: K24344

46 3 A 5-1/2” Integrated B.O.P.

Complete Ram Assembly f/ 11" 5M BOP K#: K24345


Complete Ram Assembly F/ 11" 5M BOP K#: K24346


Complete Ram Assembly F/ 11" 5M BOP W/Extra Set of Packers, K#: K24347

49 3 A 2-3/8” Integrated Complete

Ram Assembly F/ 11" 5M BOP K#: K24348

Choice of 8 - Lots 50-57 50 3 A 5-1/2” Sentinel Pipe Ram f/ 7-

1/16” BOP w/ Packer & Seals---SA-21188 K#: K30201

51 3 A 5” Sentinel Pipe Ram f/ 7-1/16”

BOP w/ Packer & Seals----SA-21250 K#: K30200




52 3 A 4-1/2” Sentinel Pipe Ram f/ 7-1/16” BOP w/ Packer & Seals---SA-21186 K#: K30199

53 3 A 4” Sentinel Pipe Ram f/ 7-1/16”

BOP w/ Packer & Seals---SA-21189 K#: K30198

54 3 A 3-1/2” Sentinel Pipe Ram f/ 7-



1/16” BOP w/ Packer & Seals----SA-21212 K#: K30192


1/16” BOP w/ Packer & Seals K#: K30197


1/16” BOP w/ Packer & Seals----SA-21215 K#: K30193

Choice of 8 - Lots 58-65 58 3 A 2-7/8” Sentinel Pipe Ram f/ 7-





1/16” BOP w/ Packer & Seals K#: K30191




1/16” BOP w/ Packer & Seals ---SA-21143 K#: K30189

63 3 A CSO/ Blind Ram F/ 7-1/16"

BOP W/ Packer & Seal SA-21145 K#: K30203




64 3 A CSO/ Blind Ram F/ 7-1/16" BOP W/ Packer & Seal SA- 21142 K#: K30204

65 3 A CSO/ Blind Ram F/ 7-1/16"

BOP W/ Seal SA-21213 K#: K30202

Choice of 4 - Lots 66-69 66 3 A QTY (33) Cameron QRC B.O.P.

Rams, CSO - 4-1/2" F/Integrated 7-1/16” x 5M B.O.P.s, From Blind to 4-1/2” K#: K27637

67 3 A QTY (9) Cameron QRC 11"

B.O.P. Rams, CSO-7" K#: K27647

68 3 A Large QTY of Cameron QRC

Rams 11” x 5M B.O.P.s From Blind to 8-5/8” (2 Pallets) K#: K27638

69 3 A SS Ram Rods & Misc. Parts for

11" 3M & 5M QRC BOP (7) SS Ram Rods, Misc. Parts & Seals for 11" 3M & 5M QRC BOP. (3) SS Ram Rods & Misc parts for 7-1/16" QRC K#: K27097

Choice of 2 - Lots 70-71 70 3 A Hyd. Closing Unit/Test Pump

Complete W/ Test Mandrels Mandrels 2-3/8" - 7", 7-1/16" 5K Test Flange, Safety Rack K#: K23849

71 3 A 4-1/2"XH BOP Test Joint

K#: K30243

Choice of 3 - Lots 72-74 72 3 A 11" 5M Studded Drilling Spool

W/ (2) 2-1/16" Flanged Outlets K#: K29196

73 3 A 7-1/16” 5M x 22”H Driling

Spool w/ 2-1/16" Flanged Outlet K#: K24580

74 3 A 7-1/16” 3M x 26”H Drilling

Spool W/ (2) 3” LP Outlets K#: K24564

Choice of 7 - Lots 75-81 75 3 A 11” 5M x 11” 3M x 15”H

Adapter Spool K#: K24566




76 3 A 9” 3M x 7-1/16” 3M x 15”H Adapter Spool Asset# 20232 K#: K24582

77 3 A 7-1/16” 10M x 7-1/16” 5M x 14-

1/2”H Adapter Spool K#: K24578

78 3 A 7-1/16” 5M x 7-1/16” 3M x 17-


79 3 A 7-1/16” 5M x 7-1/16” 3M x 13”H

Adapter Spool w/ (2) 2" LP Outlets K#: K24577

80 3 A 7-1/16” 3M x 7-1/16” 2M x 24” H

Adapter Spool K#: K24570

81 3 A 7-1/16” 3M x 7-1/16” 2M x 13-


Choice of 6 - Lots 82-87 82 3 A 11” 3M x 24”H Spacer Spool

K#: K24565

83 3 A 11” 3M x 36”H Spacer Spool W/ (1) 6” Threaded Outlet K#: K24574

84 3 A 11” 3M x 24” H Spacer Spool

w/ 2-1/16" Flanged Outlet K#: K24571

85 3 A QTY (1) 7-1/16” 5M x 7’L

Spacer Spool K#: K27642

86 3 A 7-1/16” 5M x 49”H Spacer

Spool K#: K24575

87 3 A 7-1/16” 5M x 16”H Spacer

Spool K#: K24573

Choice of 6 - Lots 88-93 88 3 A QTY (1) 7-1/16” 5M x 9’L

Spacer Spool Asset# 20023 K#: K27641

89 3 A 7-1/16” 3M x 24”H Spacer

Spool K#: K24569




90 3 A 7-1/16” 3M x 36”H Spacer Spool K#: K24579

91 3 A 7-1/16” 3M x 24”H Spacer

Spool Asset# 2xx57 K#: K24572

92 3 A 7-1/16” 3M x 24”H Spacer

Spool K#: K24568

93 3 A 7-1/16” 3M x 24”H Spacer

Spool W/ (1) 2” LP Outlets K#: K24567

94 3 A 4" 4M 3-Way Flanged Spacer

Spool & 4-1/16" x 3-1/16" x 13"H 5M Adapter Spool (1) 4” 4M x 21-1/2”H Spacer Spool W/(1) 4” Flanged Outlet, (1) 4-1/16” 5M x 3-1/16” 5M x 13”H Adapter Spool K#: K24581

95 3 A QTY Shop Built Guide Plates

(4) 7-1/16” 5M (2) 11” 3M, & (1) 11” 5M K#: K24270

96 3 A 7-1/16" Flow Nipple w/ 4" Fig

100 Outlet K#: K29212

Choice of 8 - Lots 97-104 97 3 A 13-5/8” 5M x 11” 5M D.S.A.

W/Studs & Nuts K#: K24586

98 3 A 13-5/8” 5M x 11” 3M D.S.A.


99 3 A 13-5/8” 10M x 11” 3M D.S.A.


100 3 A 13-5/8” 5M x 13-5/8” 3M D.S.A.


101 3 A 11” 5M x 11” 3M D.S.A.


102 3 A 11” 5M x 11” 3M D.S.A.


103 3 A 11” 3M x 9” 3M D.S.A.


104 3 A 11” 3M x 9” 2M D.S.A.





Choice of 6 - Lots 105-110 105 3 A 11” 5M x 7-1/16” 5M D.S.A.

W/Some Studs & Nuts K#: K24592

106 3 A 11” 5M x 7-1/16” 5M D.S.A.


107 3 A 11” 10M x 7-1/16” 3M D.S.A.


108 3 A 11” 5M x 7-1/16” 2M D.S.A.


109 3 A 11” 3M x 7-1/16” 2M D.S.A.


110 3 A 9” 2M x 7-1/16” 3M D.S.A.


Choice of 5 - Lots 111-115 111 3 A 7-1/16” 15M x 7-1/16” 10M

D.S.A. W/Studs & Nuts K#: K24589

112 3 A 7-1/16” 10M x 7-1/16” 5M D.S.A. W/Studs & Nuts K#: K24591

113 3 A 7-1/16” 15M x 7-1/16” 3M


114 3 A 7-1/16” 3M x 7-1/16” 2M D.S.A.


115 3 A 4-1/16” 10M x 4-1/16” 5M


Choice of 8 - Lots 116-123 116 3 A (3) Companion & (1) Blind

Flange, Including 8-1/8" Hinderliter 7-1/16" 5M x 8-1/8" Hinderliter, 7-1/16" 5M x 5" 8RD, 7-1/16" 3M x 2-7/8" EUE, 6" 3M Blind Flange K#: K29220

117 3 A (4) Companion Flanges,

Including 7-1/16" 5M Rector 7-1/16" 5M Rector, 7-1/16" 2M x 2-3/8" 8RD, 7-1/16" x 2-1/16" Double Stud, 7-1/16" QD K#: K29221




118 3 A (3) Companion Flanges & (2) DSA's Companion Flanges;(2) 2-1/16” 5M w/ 2” Line Pipe, 2-1/16” 5M w/ 2” Line Pipe, Single Studded 7/16 3M Ansi, (2) 2-1/16” 5m x 3M DSA's K#: K29217

119 3 A (4) 2-1/16" 5M Blind Flanges

K#: K29218

120 3 A (4) Companion Flanges & (1)

Blind Flange 2-1/16” 5M x 1/2” NPT, 2-1/16” 5M x 2-7/8” 8-Round, 2-1/16” 5M Lift Flange, 2-1/16” 3M x 2202 WECO, 2-1/16” 3M w/ 2” LP 2-1/16” 3M Blind Flange K#: K29219

121 3 A (4) Companion Flanges

2-1/16” 10m w/ 3-1/2” IF, (3) 2-1/16” 5M x 2-7/8” 8Rd Pin K#: K30217

122 3 A 4-Way Studded Cross, (2)

Companion & (1) Blind Flanges 2-1/16" 5M 4-Way Cross, Companion Flanges; 2-1/16” 5M w/ 2” Line Pipe, 2-1/16” 5M w/ 3" 8RD, 2-1/16” 5M Blind Flange K#: K29216

123 3 A (4) 7-1/16" Companion Flanges 7-1/6” 5M x 5-1/2” 8-Round, 7-1/16” 3M x 8-5/8” 8-Round, 7-1/16” 5M x 5-1/2” 8-Round, 7-1/16” 3M x 8-5/8” 8-Round K#: K29215

Choice of 6 - Lots 124-129 124 3 A (3) Companion Flanges

Incl. 7-1/16” 5m x 8 5/8” 8Rd, 7-1/16” 3m x 8-5/8” 8-Round Conn., 7-1/16” 5m x 5 ½” 8-Round K#: K30216

125 3 A (3) 7-1/16" Companion Flanges

7-1/6” 5M x 8-5/8” 8-Round, 7-1/16” 3M x 8-5/8” 8-Round, 7-1/16” 5m x 5 -1/2” 8-Round K#: K29214

126 3 A 7-1/16" 3M Well Head Adapter

& (2) 2-1/16" 5M Valves w/ Adj. Choke K#: K30242

127 3 A (6) Asst. Flanges

7-1/16” 3M x 2-7/8” 8RD Companion, (2) 7-1/16” 3M Single Stud, 11” 3M Weld On, 7-1/16” x 2-1/16” 5M Adapter Spool, 7-1/16” 3M x 4-1/16” 5M Double Stud K#: K32258

128 3 A (1) Weld-on 7-1/16" Flange, (1)

2-1/16" SS Blind Flange K#: K23850




129 3 A Combination Single Stud Adaptor 11"- 5M to 7-1/16"- 5M K#: K27075

Choice of 2 - Lots 130-131 130 3 A (3) 7-1/16” 5000# Gate Valves

K#: K30228

131 3 A QTY (2) 2-1/16” 4M Gate Valves

(QTY (2) 2” 1502 Plug Valves K#: K26078

Choice of 4 - Lots 132-135 132 3 A QTY (4) HALLS 7-1/16” x 3M

Stripper Heads K#: K27636

133 3 A (3) Halls 7-1/16" 3M Stripper

Heads K#: K27635

134 3 A QTY (3) 7-1/16" x 3M Halls

Stripper Heads K#: K24635

135 3 A 7-1/16" x 3M JU Tubing

Stripper w/ (10) Rubbers (10) Rubbers from 2-3/8" to 3-3/4" K#: K24349

Choice of 3 - Lots 136-138 136 3 A QTY (7) HSSR-20 Stripper

Rubber F/ 2-3/8” Tubing (UNUSED) Supreme & Hall Type Replacement (UNUSED) K#: K30019

137 3 A QTY (8) HSSR-25 Stripper

Rubber F/2-7/8” Tubing (UNUSED) Supreme & Hall Type Replacement (UNUSED) K#: K30020

138 3 A QTY (5) Hall Stripper Rubbers

(UNUSED) (2) 4”, (1) 3-1/2”, (1) 1-1/2”, (1) 1-1/4” K#: K30021

Choice of 2 - Lots 139-140 139 3 A QTY (21) R-Type S-4 Ring

Gaskets (UNUSED) (10) R-75/S-4, (1) R-45 Rubber Coated, (2) R-35/46-S, (4) R-45/4R Rubber Coated, (4) R-46-S K#: K30022

140 3 A QTY (10) RX/BX Type Ring

Gaskets (UNUSED) (1) RX 53-S, (1) RX 53-Rubber Coated, (1) RX 49-S, (1) RX 45-54, (1) BX 158-S4, (5) BX156-S4 K#: K30023




Choice of 8 - Lots 141-148 141 3 A YT 75-Ton Slip-Type Elevator

Dressed F/ 3-1/2" Pipe K#: K30175

HANDLING TOOLS 142 3 A YT 75-Ton Slip-Type Elevator

w/ 3-1/2" Slips Undressed K#: K30174

143 3 A AOT MYT 40-Ton Slip-Type

Elevator Dressed F/ 2-7/8" Pipe K#: K30168

144 3 A YT 75-Ton Slip-Type Elevator


145 3 A MW YT 75-Ton Slip-Type

Elevator W/ 2-7/8" Slips Undressed K#: K30177

146 3 A YT 75-Ton Slip-Type Elevator


147 3 A AOT YT 75-Ton Slip-Type


148 3 A YT 75-Ton Slip-Type Elevator Dressed F/ 2-3/8" Pipe K#: K30176

Choice of 4 - Lots 149-152 149 3 A YT 75-Ton Slip Type Elevator

(Not Dressed) w/ Slip Assy. Pins & Springs K#: K23818

150 3 A YT 75-Ton Slip Type Elevator





W /Slip Assembly K#: K23829

Choice of 7 - Lots 153-159 153 3 A AOT MYT 40-Ton Slip-Type


154 3 A MYT 40-Ton Slip-Type Elevator





155 3 A K-Fox MYT 40-Ton Slip-Type Elevator Dressed F/ 2-7/8" Pipe K#: K30166









Choice of 6 - Lots 160-165 160 3 A AOT MYT 40-Ton Slip-Type




162 3 A MYT 40 Ton Tubing Elevator Dressed for 2-3/8" Tubing K#: K23831


Elevator Dressed F/ 2-3/8" Pipe Dressed F/ 2 3/8” Pipe SA- 20537 K#: K30164

164 3 A K-Fox MYT 40-Ton Slip-Type


165 3 A MYT 40-Ton Tubing Elevator

Dressed for 2-3/8" Tubing K#: K23830

Choice of 4 - Lots 166-169 166 3 A BJ MYT 40-Ton Tubing

Elevator W/ Slips K#: K23820

167 3 A MYT 40 Ton Tubing Elevator

W/ Slip Assembly K#: K23832

168 3 A MYT AOT 40 Ton Tubing

Elevator W/ Slips K#: K23821




169 3 A Qty (2) MYT 40 Ton Tubing Elevator Bodies K#: K23833

170 3 A HYT Elevator Setting Plate

AOT 3-1/2" K#: K015426

Choice of 2 - Lots 171-172 171 3 A MYT Elevator 2-7/8" Slip

Assembly K#: K015420

172 3 A MYT Elevator 2-7/8" Slip-

Assembly K#: K015419

173 3 A MYT/YT Elevator Inserts

Sizes- 1-1/2”, 1" , 2-1/16”, 2-3/8”, 2-7/8”, & 3-1/2” K#: K29192

Choice of 3 - Lots 174-176 174 3 A (7) YT Elevator Setting Plates

K#: K015424

175 3 A (7) YT Elevator Setting Plates

K#: K015423

176 3 A (5) YT Elevator Guide Plates K#: K015425

Choice of 2 - Lots 177-178 177 3 A (5) MYT Elevator Setting Plates

1-1/2" - 2-2/3" 1-1/2", 2-1/16", 1.990", 1.660", 2-3/8" K#: K015422

178 3 A MYT Elevator Setting Plates 2-

7/8", 2-1/16", 2.375", 1" K#: K015421

Choice of 4 - Lots 179-182 179 3 A WTM 5” 225-Ton B.N. Drill Pipe

Elevator K#: K24619

180 3 A BJ 4-1/2” 250-Ton B.N. Drill

Pipe Elevator K#: K24618

181 3 A WTM 3-1/2” 150-Ton B.N. Drill


182 3 A WTM 3-1/2” 150-Ton B.N. Drill





Choice of 7 - Lots 183-189 183 3 A Baash-Ross 11-Seg Drill Collar

Slips W/Inserts, W/O Handles K#: K24611

184 3 A 12-Seg Drill Collar Slips

W/Inserts & (3) Handles K#: K24616

185 3 A WTM 6-3/4” – 8-1/4” 11-Seg

Drill Collar Slips W/O Inserts, (1) Handle K#: K24605

186 3 A Baash-Ross 6-1/4” – 8-1/4” 11-

Seg Drill Collar Slips W/Inserts & (3) Handles K#: K24608

187 3 A 12-Seg Drill Collar Slips


188 3 A WTM 5-1/2” – 7” 10-Seg Drill

Collar Slips W/Inserts (3) Handles K#: K24606

189 3 A Varco 8-1/4” – 9” 12-Seg Drill

Collar Slips W/Inserts & (3) Handles K#: K24604

Choice of 7 - Lots 190-196 190 3 A Baash-Ross 5-1/2” – 7” 11-Seg

Drill Collar Slips W/O Inserts, (3) Handles K#: K24612

191 3 A Baash-Ross 5-1/8” – 7” 13-Seg

Drill Collar Slips W/Inserts & (3) Handles K#: K24607

192 3 A Baash-Ross 11-Seg Drill Collar

Slips W/Inserts & (2) Handles K#: K24609

193 3 A WTM 4-1/4” – 5-3/4” 9-Seg Drill

Collar Slips W/Inserts & (3) Handles K#: K24613

194 3 A Baash-Ross 3-3/4” – 5-1/4” 11-

Seg Drill Collar Slips W/O Inserts, (2) Handles K#: K24614

195 3 A Baash-Ross 3-1/4” – 5-1/4” 11-

Seg Drill Collar Slips W/Inserts & (3) Handles K#: K24615




196 3 A QTY (2) Drill Collar Slips (1) Baash-Ross 5-1/2” – 7” 10-Seg W/Inserts & (3) Handles, & (1) Misc 7-Seg Drill Collar Slips K#: K25610

Choice of 2 - Lots 197-198 197 3 A Varco 3-1/2” Drill Pipe Slips


198 3 A Varco 3-1/2” Drill Pipe Slips


Choice of 4 - Lots 199-202 199 3 A QTY (1) AOT 100-Ton API Bowl

K#: K27633

200 3 A QTY (1) AOT 100-Ton API Bowl

K#: K24632


K#: K27634


K#: K27631

Choice of 8 - Lots 203-210 203 3 A AOT TS-100 5-1/2” Bowl

Dressed F/ 4" Pipe K#: K24656

204 3 A AOT TS-100 5-1/2” Bowl

Dressed F/ 4-1/2” Pipe K#: K24653

205 3 A Baash-Ross TS-100 5-1/2”

Bowl Dressed F/5-1/2” Pipe K#: K24651

206 3 A Ortco TS-100 5-1/2” Bowl

W/Slips W/O Inserts K#: K24662

207 3 A AOT TS-100 5-1/2” Bowl

Dressed F/5” Pipe K#: K24652

208 3 A Baash-Ross TS-100 5-1/2”

Bowl W/Slips W/O Inserts K#: K24663

209 3 A Baash-Ross TS-100 5-1/2”

Bowl Dressed F/4-1/2" Pipe K#: K24655




210 3 A Baash-Ross TS-100 5-1/2” Bowl Dressed F/3-1/2” Pipe K#: K24659

Choice of 6 - Lots 211-216 211 3 A Baash-Ross TS-100 4-1/2”


212 3 A Baash-Ross TS-100 4-1/2”

Bowl Dressed F/4” Pipe K#: K24657

213 3 A Ortco TS-100 4-1/2” Bowl

Dressed F/4-1/2” Pipe K#: K24654

214 3 A Ortco TS-100 4-1/2” Bowl

K#: K24664

215 3 A Ortco TS-100 4-1/2” Bowl

Dressed F/3-1/2” Pipe K#: K24658

216 3 A Baash-Ross TS-100 3-1/2”


Choice of 3 - Lots 217-219 217 3 A 4-1/2" ORTCO TS-100 Slip

Inserts (Lrg Qty) Sizes- 5-1/2”, 5", 4 1/2”, 4-1/8", 4", 3-1/2", 3-1/8", 2-7/8" K#: K29193

218 3 A 4-1/2” ORTCO TS-100 Slip

Inserts Sizes- 4-1/2”, 4-1/4", 4", 3-1/2”, 3-1/8”, 2 7/8” K#: K29195

219 3 A ORTCO TS-100 Bowl/Slip

Inserts Sizes- 2 7/8”, 2-3/8", 2-1/16”, 1-1/2", 1 1/4”, 1", 3/4" K#: K29194

220 3 A QTY (2) 3-1/2” TS-100 Slips

(1) Dressed F/3-1/2” & (1) 3-1/8” K#: K24665

Choice of 6 - Lots 221-226 221 3 A Web Wilson 7” 100-Ton Double

Latch Square Shoulder Elevator K#: K24630

222 3 A Web Wilson 5-15/16” 100-Ton

Double Latch Square Shoulder Elevator K#: K24632




223 3 A Web Wilson 5-3/4” 100-Ton Double Latch Square Shoulder Elevator K#: K24631

224 3 A BJ 5-1/2” 150-Ton Double


225 3 A BJ 5-1/8” 100-Ton Double latch

Square Shoulder Elevator K#: K24636

226 3 A BJ 4-3/4” 100-Ton Double


Choice of 6 - Lots 227-232 227 3 A BJ 4-7/8” 100-Ton Double


228 3 A BJ Type 4-1/2” 100-Ton Double


229 3 A BJ Type 4-1/2” 100-Ton Double


230 3 A BJ 4-1/2” TS-100 Double Latch Square Shoulder Elevator K#: K24638

231 3 A Web Wilson 4-1/2” 100-Ton


232 3 A BJ 3-7/8” 100-Ton Center Latch


Choice of 7 - Lots 233-239 233 3 A BJ 3-3/4” 100-Ton Center Latch











237 3 A BJ 3-1/2” 100-Ton Center Latch Square Shoulder Elevator K#: K24642



239 3 A Web Wilson 3-1/4” 100-Ton


Choice of 8 - Lots 240-247 240 3 A BJ 8-5/8" 150-Ton Side Door

Elevator K#: K24622

241 3 A Web Wilson 8-1/4” 150-Ton

Side Door Elevator K#: K24623

242 3 A Web Wilson 8-1/4” 50-Ton Side

Door Elevator K#: K24625

243 3 A 8-1/8” Square Shoulder Side


244 3 A Web Wilson 7-5/8” Side Door Elevator K#: K24626

245 3 A Web Wilson 7-1/4” Side Door

Elevator K#: K24627

246 3 A Web Wilson 5-3/4” 50-Ton Side


247 3 A B.J. Type MDD 4-1/2” Side


248 3 A Set (2) Foley FDT 1411 Tongs

Dressed F/ 3-1/2” to 5-1/2”, W/ (5) Assorted Tong Heads K#: K24271

249 3 A (2) BJ 1" Rod Elevators & (8)

Fulgrip Tubing Tongs (3) Kelco Fulgrip Tubing Tongs (5) Fulgrip Tubing Tongs K#: K27649

Choice of 3 - Lots 250-252 250 3 A QTY (2) Type C 7-SEG Safety

Clamps W/Wrenches K#: K30026




251 3 A QTY (2) Type C 12-SEG Safety Clamps W/Wrenches K#: K30024

252 3 A QTY (2) Type C 8-SEG Safety


Choice of 5 - Lots 253-257 253 3 A QTY (2) Safety Clamps; Type C

7-Seg & Type T4-Seg W/ (1) Wrench K#: K30027

254 3 A QTY (2) Type T Safety Clamps

(1) 6-SEG, (1) 5-SEG W/Wrenches K#: K30028

255 3 A QTY (2) Type T Safety Clamps

(2) 5-SEG, W/ (1) Wrench K#: K30029

256 3 A QTY (2) Type T 5-SEG Safety


257 3 A QTY (2) Type T 5-SEG Safety


258 3 A Type "T" Safety Clamp Parts Type-T Segments, Pins, Handles, Adjusting Bolts & Nuts K#: K29201

Choice of 2 - Lots 259-260 259 3 A Qty (1) Shop Built False Rotary

Table (2) Pcs, Pin-Type ( K#: K27615

260 3 A Qty (1) Shop Built False Rotary

Table (2) Pcs, Pin-Type K#: K27614

Choice of 8 - Lots 261-268 261 3 A 3-1/2" 8D TIW Safety Valve

K#: K23737

SAFETY VALVES 262 3 A 2-7/8" 8RD TIW Safety Valve

K#: K23742

263 3 A 2-7/8" 8RD TIW Safety Valve

K#: K23740


K#: K23736




265 3 A 2-7/8" 8RD TIW Safety Valve K#: K23739


K#: K23738


K#: K23744


K#: K23741

Choice of 8 - Lots 269-276 269 3 A 2-7/8" 8RD TIW Safety Valve

K#: K23743


K#: K23727


K#: K23728


K#: K30909


K#: K30901



K#: K30907


K#: K30903

Choice of 8 - Lots 277-284 277 3 A 2-3/8" 8RD TIW Safety Valve

K#: K30906


K#: K30905


K#: K30911


K#: K30912


K#: K30904


K#: K30902






K#: K30910

Choice of 9 - Lots 285-293 285 3 A 2-7/8" PH-6 TIW Safety Valve

K#: K23745

286 3 A 2-7/8" PH-6 TIW Safety Valve

K#: K23748


K#: K23747


K#: K23746


K#: K30917


K#: K30918


K#: K30916

292 3 A 2-3/8" PH-6 TIW Safety Valve K#: K30919


K#: K30914

Choice of 7 - Lots 294-300 294 3 A 2-7/8" IF Kelly Valve

K#: K23731

295 3 A 2-7/8" IF Kelly Valve

K#: K23733


K#: K23732


K#: K23729


K#: K23734


K#: K23735


K#: K23730




Choice of 2 - Lots 301-302 301 3 A 2-7/8" PH-6 Inside BOP Valve

K#: K23749

302 3 A 2-3/8" PH-6 Inside BOP Valve

K#: K23750

Choice of 9 - Lots 303-311 303 3 A 5-5/8” OD External Cutter w/ 5-

1/2” WP Conn, Guide & Dressed w/ Spring Dog K#: K26044

CUTTERS / SCRAPERS 304 3 A 5-5/8” OD External Cutter w/ 5-

1/2” WP Conn. Guide & Dressed w/ Spring Dog K#: K26045

305 3 A 4-11/16” OD External Cutter w/

4-1/2” WP Conn, Guide & Dressed w/ Springdog K#: K26047

306 3 A 4-11/16” OD External Cutter w/

4-1/2” WP Conn. Dressed & Crossover Guide & Dressed w/ Spring Dog & 4-11/16” x 4-1/2” WP Crossover K#: K26046

307 3 A 4-1/2” OD External Cutter w/4-1/2” WP Conn, Guide & Dressed w/ Springdog K#: K26049

308 3 A 4-1/2” OD External Cutter w/4-

1/2” WP Conn. Dressed & Guide Pin Guide & Dressed w/ Spring Dog & 3-3/4” Guide Pin x 3-3/4” COT Crossover K#: K26048

309 3 A 3-7/8” OD Ratchet Style

External Cutter w/ 3-3/4” COT Conn. Guide K#: K26051

310 3 A 3-7/8” OD External Cutter w/ 3-

3/4” COT Conn, Guide & Dressed w/ Springdog K#: K26050

311 3 A 4-11/16” OD Hyd. External

Cutter w/ 4-1/2” WP Conn. & Guide K#: K26052

Choice of 6 - Lots 312-317 312 3 A 7” Internal Casing Cutter w/ 3-

1/2” IF Conn. & 2-3/8” 8RD Bottom Conn. K#: K26038




313 3 A 5-1/2” Internal Casing Cutter w/ 2-3/8” IF Conn. 15.50 -17LB K#: K26040

314 3 A 5-1/2” Internal Casing Cutter w/

2-3/8” IF Conn, 2-3/8” 8RD Bottom Conn. K#: K26039


2-3/8” Reg Conn. & 2-3/8” 8Rd Bottom Conn. K#: K26042


2-3/8” Reg Conn. K#: K26041

317 3 A 4” Internal Casing Cutter w/ 2-

3/8” Reg Conn. K#: K26043

Choice of 2 - Lots 318-319 318 3 A (4) External Cutters

5-5/8” OD, 4-11/16” OD, 3-7/8” OD Not Dressed & 5-1/2” OD WP Hyd Cutter K#: K29200

319 3 A (3) Po-Boy Cutters

4-11/16” OD, 4-3/8” OD, & 3-3/4” OD K#: K26054

320 3 A 3-3/4” OD Under Reamer w/ 2-3/8 Reg. Conn. K#: K26053

321 3 A (2) 4-9/16” Hyd Cutter Guides,

(1) 4-1/2" WP Cutter Top Sub & 3-7/8" Clulow Guid w/ (1) 4 1/2” WP Top Sub & 4 ½” OD x 3 7/8” Clulow Socket Guide K#: K29127

Choice of 3 - Lots 322-324 322 3 A 4-1/2” OD External Cutter Parts

(2) Preload Sleeves (24) Knives, Bag Of Teflon Thrust Washers K#: K29156

323 3 A 3-7/8” OD External Cutter Parts

(3) Spring Dog Bodies (1 Dressed), Pre-Load Sleeve, Set Screws & Rivet Pins, (8) Cutting Knives & Misc. K#: K29155

324 3 A 4-11/16” OD External Cutter

Parts (2) Spring Dog Bodies, (1) Set Of Cutters, Spring, (2) Spacers, & Approx. 12 Cutting Knives & Misc. K#: K29154

Choice of 5 - Lots 325-329 325 3 A 10-3/4” Casing Scraper w/ 6-

5/8” Reg Conn & Lift Bail K#: K27529




326 3 A 7-5/8" D.M. Best Casing Scraper 3-1/2" Reg K#: K24281

327 3 A 7" M&M Casing Scraper 3-1/2"

Reg K#: K24282

328 3 A 7" D.M. Best Casing Scraper w/

3-1/2" Reg Conn K#: K24283

329 3 A 7" D.M. Best Casing Scraper w/

3-1/2" Reg Conn K#: K24284

Choice of 8 - Lots 330-337 330 3 A 5-1/2" 26-LB D.M. Best Casing

Scraper w/ 2-3/8" Reg Conn K#: K24290

331 3 A 5-1/2" 23-LB D.M. Best Casing


332 3 A 5-1/2" D.M. Best Casing


333 3 A 5-1/2" D.M. Best Casing Scraper w/ 2-7/8" Reg Conn K#: K24287

334 3 A 5-1/2" DM Best Type Casing


335 3 A 5-1/2" M&M Type Casing


336 3 A 5-1/2" M&M Casing Scraper w/

2-7/8" Reg Conn K#: K24286

337 3 A 5-1/2" M&M Casing Scraper w/

2-7/8" Reg Conn K#: K24285

Choice of 5 - Lots 338-342 338 3 A 4-1/2" D.M. Best Casing


339 3 A 4-1/2" D.M. Best Casing





340 3 A 4-1/2" M&M Casing Scraper w/ 2-3/8" Reg Conn K#: K24293

341 3 A 4" M&M Casing Scraper w/ 2-

3/8" Reg Conn K#: K24295

342 3 A 4" M&M Casing Scraper w/ 2-

3/8" Reg Conn K#: K24294

Choice of 3 - Lots 343-345 343 3 A 3-1/2" Tubing Scraper w/ 1-

13/16"WFJ Conn K#: K24296

344 3 A 2-7/8" Tubing Scraper w/ 1-

13/16" WFJ Conn K#: K24297

345 3 A QTY (6) Misc Scraper Bodies

DM Best Type Scraper Bodies (4) 5-1/2", (1) 7", (1) 4-1/2", 5-1/2"Subs, (1) Top Sub (1) Bottom Sub for 5-1/2" M&M Scraper, 4-1/2" M&M Scraper Subs (1) Top Sub (1) Bottom Sub K#: K24342

Choice of 4 - Lots 346-349 346 3 A 7” Casing Brush w/ 3-1/2” Reg

Conn K#: K27531

347 3 A 5-1/2” Casing Brush w/ 2-7/8”

Reg Conn K#: K27530

348 3 A 4-1/2” Casing Brush w/ 2-3/8”

Reg Conn Not Dressed K#: K27533

349 3 A 4” Casing Brush w/ 2-3/8” Reg

Conn (unused) K#: K27532

Choice of 8 - Lots 350-357 350 3 A 14” OD Fishing Magnet w/ 6-

5/8” Reg Conn & Lift Bail K#: K27525

MAGNETS / IMPRESSION BLOCKS 351 3 A 8” OD Fishing Magnet w/ 4-1/2”

Reg. Conn. (3) Guides; (2) Mill & (1) Cut Lip & Lifting Bail---SA- 97154 K#: K26030




352 3 A 7” OD Fishing Magnet w/ 4-1/2” Reg. Conn. w/ (2) Guides; (1) Mill & (1) Cut-Lip ---Sa-01000 K#: K26031

353 3 A 5-3/4” OD Fishing Magnet w/ 3-

1/2” Reg. Conn. w/ 7” OD Wireline Stripping Guide & Lift Bail K#: K26032


7/8” Reg. Conn. w/ Mill Guide K#: K26033


7/8” Reg. Conn. w/ Cut Lip Guide K#: K26034


3/8” RD Collar (3) Guides; (2) Mill & (1) Cut Lip Guide K#: K26035

357 3 A (2) Fishing Magnets; 2-5/8"OD

w/ 5/8" SR Conn & 2-1/8"OD w/ 3/4" SR Conn w/ Mill Guide K#: K26036

Choice of 6 - Lots 358-363 358 3 A Ditch Magnet

K#: K30152

359 3 A Ditch Magnet

K#: K30153


K#: K30154


K#: K30151


K#: K015430


K#: K015431

Choice of 6 - Lots 364-369 364 3 A 9-1/2” OD Lead Impression

Block w/ 3-1/2” 8RD Conn K#: K22776

365 3 A 7-1/2” OD Lead Impression

Block w/ 4-1/2” XH Conn K#: K22775




366 3 A 7-1/2” OD Lead Impression Block w/ 3-1/2” 8RD Conn K#: K22777

367 3 A 6” OD Lead Impression Block

w/ 2-7/8” 8RD Conn K#: K22778





Choice of 5 - Lots 370-374 370 3 A 4-1/4” OD Lead Impression






373 3 A 3” OD Lead Impression Block w/ 2-3/8” 8RD Conn K#: K22784


Block w/ 3/4” SR Conn K#: K22785

Choice of 2 - Lots 375-376 375 3 A 5-3/4” Bowen Knuckle Joint w/

4-1/2” FH Conn K#: K27526

376 3 A (2) Assy # 38910 2-1/8” OD

Knuckle JTS w/ 3/4” SR Conn. K#: K29126

Choice of 4 - Lots 377-380 377 3 A 2-7/8" 8RD x 3-3/4” OD Sand

Pump Dressed Dressed--SA-20389 K#: K30253

SPEARS / OVERSHOTS 378 3 A 2-7/8" 8RD x 3-3/4” OD Sand

Pump Dressed Dressed----SA-20277 K#: K30254




379 3 A 2-3/8" 8RD x 3 1/8” OD Sand Pump Dressed Dressed----SA-2605 K#: K30252

380 3 A 2-3/8" 8RD x 3-1/8” OD Sand

Pump Not Dressed----SA-2606 K#: K30251

Choice of 4 - Lots 381-384 381 3 A (3) 2-7/8” 8-RD Flapper Valves,

Jet Sub, (3) Notch Collars For 3-3/4” OD Sand Pump w/ 2-7/8” 8-Round Conn.---SA-20281, 20280, 20228, 20279 K#: K30256

382 3 A (3) 2-7/8" 8RD Flapper Valves,

Jet Sub, & (3) Notch Collars For 3-3/4” OD Sand Pump w/ 2-7/8” 8-Round Conn K#: K30255


Jet Sub, Drain Sub, Notch Collar For 3-1/8” OD Sand Pump w/ 2-3/8” 8-Round Conn K#: K30258


Jet Sub, Drain Sub, Notch Collar For 3-1/8” OD Sand Pump w/ 2-3/8” 8-Round Conn K#: K30257

Choice of 6 - Lots 385-390 385 3 A 7” OD, GR# 9268 ITCO Type

Releasing Spear w/ 4-1/2"FH Conn K#: K27534

386 3 A 5” OD GR# 9682 ITCO Type

Releasing Spear w/ 2-3/8"IF Conn & Stock Spear Nut (UNUSED) K#: K27535


Rleasing Spear w/ 2-7/8"IF Conn K#: K27536


Releasing Spear w/ 2-3/8"Reg Conn (Spear Nut Threads Need Chased) K#: K27538


Releasing Spear w/ 2-3/8" Reg Conn (No Spear Nut) K#: K27539


Releasing Spear w/ 2-3/8"REG Conn K#: K27537




Choice of 6 - Lots 391-396 391 3 A 2-7/8” OD GR# 1230 ITCO Type

Releasing Spear w/ 2-7/8" Reg Conn Milled Spear Nut K#: K27541

392 3 A 2-7/8” OD GR# 1230 ITCO Type

Releasing Spear w/ 2-7/8" Reg Conn K#: K27540

393 3 A 2-7/8” OD GR# 1230 ITCO Type

Releasing Spear w/ 1-13/16"WFJ Conn K#: K27542

394 3 A 2-3/8” OD GR# 1348 ITCO Type

Releasing Spear w/ 2-3/8” Reg Conn. K#: K27543

395 3 A 2-3/8” OD GR# 1348 ITCO Type


396 3 A 2-3/8” OD GR# 1348 ITCO Type


Choice of 5 - Lots 397-401 397 3 A 1.66” OD GR# 11197 ITCO

Type Releasing Spear w/ 3/4” SR Collar Box K#: K27546

398 3 A 1.66” OD GR# 11197 ITCO Type Releasing Spear w/ 5/8” SR Collar Box K#: K27547

399 3 A 1.66” OD GR# 11197 ITCO

Type Releasing Spear w/ 3/4” SR Extension K#: K27548

400 3 A 1.313” OD GR# 19352 ITCO

Type Releasing Spear w/ 5/8” SR Conn K#: K27549

401 3 A 1.05” OD GR# 16457 ITCO

Type Releasing Spear w/ 5/8” SR Conn. K#: K27550

402 3 A (2) ITCO Type Releasing

Spears Mandrels (Damaged Whickers) (1) 2-7/8” GR# 1230 w/ 2-3/8” IF & (1) 2-3/8” GR# 1348 w/ 2-3/8” Reg K#: K26001

Choice of 6 - Lots 403-408 403 3 A (3) 2-7/8” 8RD Spear Stop Subs

K#: K29105




404 3 A (3) 2-3/8” Reg Stop Subs + (5) Stops 3-3/4” OD, 6 "OD, 4-1/2" OD, 8-3/4" OD, 6-1/2” OD K#: K29104

405 3 A (3) 2-3/8” 8RD Spear Stop Subs

K#: K29106

406 3 A (2) Stop Subs

6-1/2” OD w / 3-1/2” IF Conn & 6” OD w/ 2-7/8” IF Conn K#: K29108


10" OD w / 2-7/8” IF Conn. & 11 "OD w/ 4-1/2” XH Conn K#: K29107


6-1/8” 0D w/ 2-3/8” IF Conn. & 9-1/4” OD w/ 3-1/2” Reg. Conn K#: K29109

409 3 A Releasing Spear Components

(2) Extensions w/ 3/4” SR & 1-13/16 WFJ Connections, (6) Asst OD Stops, (7) Spear Tops + misc. K#: K29103

410 3 A GR# 15803 12-3/4” OD Series 150 Overshot w/ 7-5/8” Reg Conn. K#: K24351

Choice of 3 - Lots 411-413 411 3 A GR# 5334 11-3/4” OD Series

150 Overshot 6-5/8" Reg Conn K#: K24353

412 3 A 11-3/4" OD GR# 5334 Overshot

Bowl & 44"L Extension & (2) Controls K#: K24354

413 3 A (3) Over Sized Guides f/ 11-3/4”

Overshot 19” OD, 24” OD, 20” OD K#: K30240

414 3 A GR# 9057 9-1/2” OD Series 150

Overshot w/ 4-1/2" FH conn K#: K24361

415 3 A (2) 9-1/2" OD GR# 9057

Extensions; 32"L & 21"L K#: K23655

416 3 A GR#9853 9” OD Series 150

Overshot & (2) Extensions 4-1/2" Reg Conn, 32” L Extensions K#: K24359




417 3 A GR# 9853 8-7/8” OD Series 150 Overshot & 32"L Extension 4-1/2" Reg Conn K#: K24360

Choice of 6 - Lots 418-423 418 3 A GR# 9222 8-1/8” OD Series 150

Overshot w/ 4-1/2" IF Conn K#: K24363

419 3 A GR# 9222 8-1/8” OD Series 150

Overshot w/ 4-1/2" FH Conn K#: K24362

420 3 A GR# 9222 8 1/8” OD 36"L OS

Extension, (2) Cut Lip Guides & 4-1/2" FH Top Sub (1) 9-1/4" Oversized Cut Lip Guide K#: K24364

421 3 A GR# 9222 8-1/8” OD 20"L OS

Extension & (4) Cut-Lip Guides 8-7/8” & 9-1/4" OD Oversized Guides K#: K24365

422 3 A (5) Oversized Cut-Lip Guides

F/ 8-1/8" OD GR# 9222 Overshot (1) 8-3/8” OD x 4-3/16"ID Duck Nest, (1) 8-1/8" OD x5-½” ID Duck Nest, (1) 8-7/8” OD, (1) 14” OD, (1) 8-1/2" OD K#: K24371

423 3 A (2) 8-1/8” OD Crossovers & OS Guide & (1) 8-7/8” OD Top Sub 8-1/8” Bowl Pin x 8-1/8” WP, 8-1/8” Guide Pin x 8-1/8” WP, 8-3/8” OD x 6-1/4” ID O.S. Guide, Top Sub Has 9851 Stamped On It; Grapple # is Unknown.---SA- 13482, 20953, 15520 K#: K29069


Overshot w/ 4-1/2" IF Conn (Unused) K#: K24374

425 3 A GR# 9687 7-3/8” OD Series 150

Overshot w/ 4-1/2" FH Conn K#: K24375

426 3 A GR# 9687 7-3/8” OD 38"L

Extension & (2) Cut-Lip Guides w/ Duck Nests 5.5” & 4.5" ID Cut-Lip Guides K#: K24377

427 3 A GR# 9687 Guide Pin and Bowl

Pin Crossover Bushings 7 3/8” Overshot Guide Pin x 7 5/8” WP Pin, 7 3/8” Overshot Bowl Pin x 7 5/8” WP Box K#: K24376

428 3 A 7-3/4" OD x 32"L & 6-7/8" OD x

32"L Overshot Extensions K#: K31015




429 3 A GR# 8619 6-5/8” OD Series 150 Overshot, 26"L Extension, & Bowl Pin Crossover Overshot w/ 3-1/2" IF Conn, 6-5/8” OS Bowl Pin x 7” WP Pin Box K#: K24378

430 3 A GR# 4498 6-3/8” OD Series 150

Overshot w/ 3-1/2" IF Conn & 26"L Extension K#: K24379


Overshot w/ 2-7/8" IF Conn K#: K24381

432 3 A GR# 6112 5-3/4” OD Series 150

Overshot w/ 3-1/2" 8RD Conn K#: K24382

433 3 A GR# 6112 5-3/4” OD Series 150

Overshot w/ 2-7/8" 8RD Conn K#: K24380

434 3 A GR# 6112 5-3/4” OD Series 150

Overshot w/ Left Hand Blank Conn K#: K24383

Choice of 4 - Lots 435-438 435 3 A (2) 5-3/4” OD Overshot

Extensions & Top Sub w/ 3-1/2" IF Conn 29” L & 26.5” L Extensions. K#: K24385

436 3 A (2) 5-3/4” OD Overshot

Extensions & Top Sub w/ 3-1/2 8RD Conn Extension; 27.5” L & 22” L K#: K24386

437 3 A (2) 5-3/4” OD Overshot

Extensions 31"L & 25"L & Top Sub w/ 3-1/2" IF Conn K#: K24384

438 3 A GR#6112 5-3/4” OD x 27.5” L

Lower Extension K#: K31012

Choice of 8 - Lots 439-446 439 3 A (4) GR# 6112 5-3/4” OD

Oversized Kutrite Guides 8-1/4” OD x 2-7/8” ID, 6-1/2”OD x 2-3/8”ID, 6-1/4”OD x 5-1/4”ID, 6-1/2”OD x 2-3/8” ID. K#: K31014

440 3 A (4) GR# 6112 5-3/4” OD

Oversized Kutrite Guides 6-1/4” OD x 2-9/16” ID, 6-5/8” OD x 2-3/8” ID, 6-3/8” OD x 2-3/8”ID, 6-3/8” OD x 2-3/8” ID, 6-3/8” OD x 2-3/8” ID. K#: K31013




441 3 A (4) GR# 6112 Cut Lip Guides w/ Duck Nests (1) 3-1/16” ID , (1) 3-21/32” ID, (1) 6.5” OD x 2-7/8” ID Over-Sized Guide, (1) 5.75” OD x 3-1/16” ID K#: K24391

442 3 A (4) GR# 6112 Cut Lip Guides w/

Duck Nests (1) 2-1/2” ID, (1) 3” ID, (1) 6.25” OD x 2 5/8” ID, (1) 6-3/16” OD x 4-5/8” ID K#: K24390

443 3 A (4) GR# 6112 5-3/4" OD Guides

w/ Duck Nests (1) 2-3/8” ID Mill (1) 3-1/2” ID Cut-Lip (1) 2-3/8” ID Cut-Lip (1) 3-1/2” ID Cut-Lip K#: K24389

444 3 A (4) GR# 6112 Cut Lip Guides w/

Duck Nests (1) 6” OD, (1) 4.5” ID, (1) 2-3/8” ID, (1) 6 5/8” OD x 1 3/8” ID K#: K24392

445 3 A (4) GR# 6112 Oversized Guides

(1) 6 ¼” OD x 2 3/8” ID Duck Nest (1) 8” OD x 1-1/2” ID Duck Nest, (1) 11 5/8” OD (1) 7-5/8" OD K#: K24395

446 3 A (4) GR# 6112 Guides (1) 8-1/4” OD Oversized Guide w/ 4” Ducknest, (1) 2-3/8” ID Mill Guide, (1) 6-1/2” OD Oversized Guide, (1) 9-3/4” OD Oversized Guide K#: K24394

Choice of 4 - Lots 447-450 447 3 A GR# 6112 5-3/4" OD Bowl Pin x

Guide Pin Cross Over Bushing K#: K24388

448 3 A GR# 6112 5-3/4"OD Bowl Pin x

Guide Pin Cross Over Bushing K#: K24387

449 3 A GR# 6112 5-3/4" Guide Pin x 5-

1/2" WP Box Cross Over Bushing K#: K24419

450 3 A GR# 6112 5-3/4"OD Bowl Pin x

5-1/2" WP Cross Over Bushing K#: K24420

451 3 A (2) 5-3/8” OD Overshot Cut-lip

Guides K#: K23667

Choice of 3 - Lots 452-454 452 3 A 4-11/16” OD GR# 9122 Series

150 Overshot w/ 3-1/2” IF Conn. K#: K29001




453 3 A 4-11/16” OD GR# 9122 Series 150 Overshot w/ 2-7/8” IF Conn Cut Lip Guide w/ 2-7/8" ID Duck Nest K#: K29002

454 3 A 4-11/16" OD Overshot Bowl,

Extension, Top Sub, & (2) Guides 4-11/16” OD x 30” L Extension 4-11/16” Bowl, 3-1/2” IF Top Sub & (2) Guides K#: K29003

Choice of 5 - Lots 455-459 455 3 A 4-11/16” OD GR# 1741 Side

Door Overshot w/ 2-7/8” Reg. Conn. K#: K29199

456 3 A 4-1/8” OD GR# 1741 Series 150

Overshot w/ 2-3/8" IF Conn & Bowl Pin Crossover 4-1/8” Bowl Pin x 4-1/2” WP Crossover K#: K29040


w/ Duck Nests 5-5/8” OD x 1-3/4” ID, 5” OD x 1-3/4” ID, 4-1/8” OD x 2 -1/2” ID, 4-3/4” OD x 2-3/8” ID K#: K29043


6” OD , 4-5/8” OD x 2-3/4” ID Duck Nest , 4-5/8” OD x 2” ID Duck nest , & 4-1/8” OD Mill (Uncut) K#: K29042

459 3 A 4-1/8” OD x 36”L Extension & GR# 1741 Top Sub w/ 2-7/8" 8RD Conn K#: K29041


150 Overshot w/ 2-7/8” IF Conn. K#: K29004

461 3 A 4-1/2” OD GR# 6662 Series 150

Overshot w/ 2-3/8” IF Conn. K#: K29007

462 3 A 4-9/16” OD GR# 6662 Series

150 Overshot w/ 2-3/8” IF Conn. SA-20097 K#: K29008

463 3 A 4-9/16” OD GR# 6662 Series

150 Overshot w/ 2-3/8” IF Conn. SA-20026 K#: K29009

464 3 A 4-9/16” OD GR# 6662 Series

150 Overshot w/ 2-7/8” 8rd Conn. SA-20026 K#: K29006

465 3 A 4-9/16” OD GR# 6662 Series

150 Overshot w/ 2-7/8” 8rd Conn. K#: K29005




Choice of 8 - Lots 466-473 466 3 A 4-9/16” OD x 36” L Extension

K#: K29010

467 3 A 4-9/16” OD x 33” L Extension

“Bored F/Stop” SA-21074 K#: K29011

468 3 A 4-9/16” OD x 31” L Extension

K#: K29014

469 3 A 4-9/16” OD x 31” L Extension

K#: K29013

470 3 A 4-9/16” x 30” L Extension

K#: K29016

471 3 A 4-9/16” x 30” L Extension

K#: K29015

472 3 A 4-9/16” OD x 24” L Extension

“Bored F/Stop” SA-20362 K#: K29012

473 3 A 4-9/16” x 22”L Extension

SA-20314 K#: K29017

Choice of 6 - Lots 474-479 474 3 A (4) 4-9/16” OD Overshot Cut-

Lip Guides w/ Duck Nests 6” OD x 2” ID, 3-21/32” ID, 2-3/8” ID, 3-1/16” ID K#: K29023

475 3 A (4) 4-9/16” OD Overshot Cut-

Lip Guides w/ Duck Nests (3) 2-3/8” ID & (1) 2.702” ID K#: K29022

476 3 A (4) 4-9/16” OD Overshot Cut-

Lip Guides w/ Duck Nest 2-3/8 ID”, 5-3/4” OD x 3-1/16” ID, 2-3/8” ID, 3-1/16” ID K#: K29024

477 3 A (3) Oversized 4-9/16” Overshot

Guides 5-3/4” OD x 3-1/2” ID Plain Mill, 5-1/2” OD Cut Lip, 5-9/16” Cut Lip K#: K29020

478 3 A (4) 4-9/16” Overshot Guides

7-5/8” OD Cut- Lip, 5-3/8” OD x 3” ID, Cut Lip w/ Duck Nest, 2-7/8” ID Fan Type, 2-3/8” ID Cut Lip w/ Duck Nest K#: K29021

479 3 A (3) 4-9/16” Overshot Guides;

(2) Cut-Lip & (1) Plain K#: K29019




Choice of 8 - Lots 480-487 480 3 A (2) 4-9/16" OD Overshot

Crossovers 4-9/16” Guide Pin x 4-1/2” WP & 4-9/16” Guide Pin x 5-3/4” Guide Box K#: K29070

481 3 A 4-9/16” Bowl Pin x 4-9/16”

Guide Pin Crossover K#: K29034

482 3 A 4-9/16” OS Bowl Pin x 4-1/2"

WP Box Overshot Crossover K#: K29018

483 3 A 4-9/16” Overshot Bowl Pin x 4-

1/2” WP Crossover K#: K29031

484 3 A 4-9/16” Overshot Bowl Pin x 4 -




486 3 A 4 9/16” Overshot Bowl Pin x 4-


487 3 A 4-9/16” Bowl Pin x 4-9/16” Guide Pin Crossover K#: K29033

488 3 A 4-3/8” OD GR# B3607 Series

150 Overshot w/ 2-7/8” 8rd Conn. K#: K29025

Choice of 3 - Lots 489-491 489 3 A 4-3/8” OD Overshot Top Sub w/

2-7/8" 8RD Conn & (2) Cut Lip Guides w/ Duck Nests 2-3/8” ID & 2-7/8” ID K#: K29028

490 3 A 4-3/8” OD x 31” L Extension

Bored F/Stop SA-14876 K#: K29027


Bored F/Stop K#: K29026

Choice of 5 - Lots 492-496 492 3 A 4-3/8” Overshot Guide Pin x 4-

3/8” Overshot Bowl Pin Crossover Sa-20927 K#: K29038




493 3 A 4-3/8” Overshot Guide Pin x 4-3/8” Overshot Bowl Pin Crossover K#: K29039


3/8” RFJ Crossover K#: K29035


3/8” RFJ Crossover K#: K29036

496 3 A 4-3/8” Overshot Guide Pin x 4-

3/8” RFJ Pin Crossover SA- 20331 K#: K29037

Choice of 2 - Lots 497-498 497 3 A 3-15/16” OD GR# B3596 Series

150 Overshot w/ 2-3/8" Reg Conn & Extra Guide Guide w/ 2 3/8” ID Duck Nest K#: K29044

498 3 A 3-7/8” OD GR# B1837 Series

150 Overshot w/ 2 3/8” IF Conn. & Extension & Top Sub 36” L Extension (Bored) f/ Stop & Top Sub w/ 2 3/8” 8-Round Conn. K#: K29045


150 Overshot w/ 2 3/8” Reg. Conn. K#: K29047

500 3 A 3-3/4” OD GR# 3759 Series 150

Overshot w/ 2 3/8” IF Conn. Mill Guide w/ 3” ID Ducknest K#: K29046

Choice of 6 - Lots 501-506 501 3 A 3-3/4” GR#37590 Top Sub w/ 2-

3/8” IF Conn. & (3) Guides Guides;(1) Cut Lip & (2) Plain K#: K29049

502 3 A 3-3/4” GR#37590 Top Sub w/ 2-

3/8” 8-Round Conn. & (2) Guides (1) Cut-Lip & (1) Uncut K#: K29048

503 3 A 3-3/4” OD x 19-1/2” L Lower

Extension K#: K29053


Bored f/ Stop K#: K29050


K#: K29051




506 3 A 3-3/4” OD x 20-1/2” L Extension K#: K29052

Choice of 5 - Lots 507-511 507 3 A (2) 3-3/4” OD Overshot Bowl

Pin x 3-3/4” COT Crossover (1) Box & (1) Pin K#: K29058

508 3 A 3-3/4” OD Overshot Bowl Pin x

3-3/4” COT Box Crossover K#: K29057


3-3/4” OS Guide Pin Crossover K#: K29055


3-3/4” OS Guide Pin Crossover K#: K29056

511 3 A 3-3/4” OD Overshot Guide Pin

x 3-3/4” Dot Box Crossover K#: K29054

Choice of 2 - Lots 512-513 512 3 A (5) GR# 37590 Guides

6” OD Oversized, Duck Nests; 3-1/16” ID, 3-1/8” ID , 2-19/32” ID, 2-3/8” ID K#: K29060

513 3 A (5) GR# 37590 Guides 4-5/8” OD , 4-1/8” OD x 2 3/8” ID, 1-1/2” ID, 2-7/8” ID, & 2 3/8” ID K#: K29059

Choice of 6 - Lots 514-519 514 3 A 3-5/8” OD GR# 9272 Series 150

Overshot w/ 2-3/8” Reg. Conn. Guide Has 2-3/8” ID Ducknest K#: K29062

515 3 A 3-5/8” OD GR# 9272 Series 150

Overshot w/ 2-3/8” Reg. Conn. K#: K29061

516 3 A 3-5/8” OD GR# 9272 Overshot

Bowl & Top Sub w/ 2-7/8" 8RD Conn K#: K29063

517 3 A (2) GR# 9272 Top Subs w/ 2-3/8

Reg & 2-3/8 8Rd Conn K#: K29064

518 3 A (2) GR# 9272 Top Subs w/2-

3/8” 8Rd Conn. K#: K29065

519 3 A (2) 3-5/8” Overshot

Crossovers; Bowl Pin x 3-3/4"COT & Guide Pin x 3-3/4 DOT Pin K#: K29066





Overshot w/ 2-3/8” 8Rd Conn. & 3.300 OD OS Guide K#: K29068

521 3 A 3-1/8” OD GR# 9307

Continuous Overshot w/ 3-1/4” WP Conn. K#: K29067


10 Sucker Rod Overshot w/ 1-1/2" Non-Upset 10Rd Conn K#: K29085

523 3 A 2-27/32” OD GR# 9872 Series

10 Sucker Rod Overshot w/ 1" SR Conn K#: K29084

524 3 A 2-27/32” OD GR# 9872, 22” L

Ext., Top Sub w/ 1-13/16” FJ Conn. & Cut-Lip Guide K#: K29086

Choice of 2 - Lots 525-526 525 3 A 2-5/8” OD GR# 10204 Overshot

w/ 2-1/16” CS Conn. K#: K29087

526 3 A 2-5/8” OD GR # 10204, 22” L Extension & (2) Top Subs 1-13/16” WFJ & 2-3/8” CS Connections K#: K29088


Rod Overshot w/ 3/4" SR Conn K#: K29090

528 3 A 2-5/16” OD GR# 9403 Series 10

Rod Overshot w/ 7/8" SR Conn K#: K29089


Rod Overshot w/ 7/8" SR Conn & Extra Guide K#: K29094

530 3 A 2-1/8” OD GR# 27768 Series 10

Rod Overshot w/ 7/8" SR Conn & Extra Guide K#: K29095


10 Rod Overshot w/ 3/4 SR Box Conn& (2) Extra Guides K#: K29097




532 3 A 1-29/32” OD GR# 9343 Series 10 Rod Overshot w/ 1-1/4” CS Conn & (2) Extra Guides K#: K29098

533 3 A 1-29/32” OD GR# 78993

Continuous Rod Overshot w/ 1-1/4” CS Conn & Spare Comp. Spare Top Sub w/ 2-3/8” CS Conn. & (3) Guides: 3” OD O.S. & (2) Milled Guides K#: K29096

534 3 A 1-21/32” OD GR# 16493 Series

10 Rod Overshot w/ 3/4” SR Conn. K#: K29102

Choice of 9 - Lots 535-543 535 3 A 7-5/8” OD GR# 11633 Short

Catch Overshot w/ 4-1/2" FH Conn & Guide Pin Crossover 7-5/8” Short Catch Bowl Pin x 7-5/8” WP K#: K29071

536 3 A 5-7/8” OD GR# 10563 Short

Catch Overshot w/ 3-1/2” IF Conn. + Ext. & Bowl Pin 19” L Extension & 5-7/8” S.C. Bowl Pin x 5-1/2” WP Crossover K#: K29072

537 3 A 5-7/8” OD x 44” L Short Catch

Extension & Bowl pin x 5 ½” WP Crossover K#: K29073

538 3 A 5-3/4” OD GR# 13068 Short Catch Overshot w/ 3-1/2” IF Conn & Bowl Pin Incl. 5-3/4” Bowl Pin x 5-3/4” WP Crossover K#: K29074

539 3 A 4-11/16” GR# 10546 Short

Catch Overshot W/ 2-7/8" IF Conn + Ext. & Bowl Pin 24” L Extension, 4-11/16” Bowl Pin x 4-1/2" WP Crossover K#: K29075

540 3 A 4-3/8” OD GR# B11026 Short

Catch Overshot w/ 2-3/8” IF Conn. K#: K29076

541 3 A 4-3/8” OD GR# B11026 Short

Catch Overshot Bowl & Bowl Pin 4-3/8” Bowl Pin x 4-1/2” WP Crossover K#: K29077

542 3 A 4-1/8” OD GR# 10437 Short

Catch Overshot w/ 2-3/8" IF Conn K#: K29078

543 3 A 3-3/4” OD GR# 13538 Short

Catch Overshot w/ 2-3/8” 8RD Conn. K#: K29079




Choice of 6 - Lots 544-549 544 3 A 2-5/16” GR# 9403 Series 20

Short Catch Rod Overshot w/ 3/4” SR Conn. K#: K29091

545 3 A 2-5/16” OD GR# 9403 Rod

Overshot Components 31” L Ext., (2) Top Subs w/ 3/4” SR & 1-1/4” NU 10RD Connections, Stop, Plain Guide, & Guide Pin x Bowl Pin Crossover K#: K29092

546 3 A 2-5/16” OD GR# 9403 Rod

Overshot Components 20.5” L Ext., Top Sub w/ 1-13/16” WFJ Conn, 2-3/4” OD O.S. Guide, Plain Guide, Guide Pin x Bowl Pin Crossover K#: K29093

547 3 A 1-29/32” OD GR# 78993 Rod

Overshot Components 33” L Extension, 3/4” SR Top Sub & (4) Guides K#: K29099

548 3 A 1-3/4” OD GR# 18358 Series 20

Short Catch Rod Overshot & Extra Top Sub w/ 1" CS Conn & Extra 1” CS Box Top Sub K#: K29101

549 3 A 1-3/4” OD GR# 18358 Series 20 Short Catch Rod Overshot & Extra Top Sub w/ 3/4” SR Conn. & 3/4” SR Box Top Sub K#: K29100

Choice of 4 - Lots 550-553 550 3 A (2) Series 150 Homemade

Short Catch Overshot Bowls 5-3/4” OD GR# 6112 & 4-11/16” OD GR# 6662 K#: K29080

551 3 A (2) Series 150 Homemade

Short Catch Overshot Bowls 4-9/16” OD GR# 6662 (Unused) & 4-1/2” OD GR#6662 K#: K29081








Choice of 4 - Lots 554-557 554 3 A GR# 11243 7” Type A Casing

Patch (Complete) W/Extra Parts, Bowl, Top Sub, Guide, (2) Grapples, (3) MCPO, (3) Packer Protectors, (3) Type A Packers K#: K24339

555 3 A GR# 11243 7” Type A Casing

Patch (Complete) W/Extra Parts, Bowl, Top Sub, Guide, (3) Grapples, (3) Packer Protectors, (1) Type A Packer, (3) MCPO K#: K24340

556 3 A (4) GR# 11228 Casing Patch

Grapples, (2) Guides, (2) Packers & Stops (4) 5.5” Grapple Baskets w (3) Mill Controls, (2) Packers, Stops & (2) Guides; 6 5/8” OD & 6 ¾” OD K#: K29159

557 3 A WKM 7" Casing Hanger Slips

K#: K015409

558 3 A (3) Packer Spear Grapples

(UNUSED) GRH 69712 w/ 3.250 ID Catch, (2) GR# 96079 w/ 2.550 & 2.668 Catches K#: K29157

Choice of 2 - Lots 559-560 559 3 A 11” OD Reverse Circulating

Junk Basket w/ 6-5/8” Reg Conn K#: K27528

JUNK BASKETS 560 3 A 7-7/8” OD Reverse Circulating

Junk Basket w/ 5-1/2 Reg Conn, 8-1/2 OD w/ Kutrite K#: K27527

Choice of 10 - Lots 561-570 561 3 A 9-1/2” OD Boot Basket W/6-

5/8” REG Conn. K#: K24315

562 3 A 8-5/8” OD Boot Basket W/ 6-

5/8” REG Conn. K#: K24317


5/8” REG Conn. K#: K24316


1/2” REG Conn. K#: K24318

565 3 A 7” OD Boot Basket W/ 4-1/2”

REG Conn. K#: K24322




566 3 A 7” OD Boot Basket W/ 4-1/2” REG Conn. K#: K24321





569 3 A 5-1/2” OD Boot Basket W/3-

1/2” REG Conn. K#: K24323



571 3 A 30.75”OD Pinger Style Junk

Catcher, (2) Rotary Shoes, Stabilizer & Cement Shoe Junk Catcher w/ 7-5/8” Reg Conn, 11-3/4” WP Rotary Shoe, 25-3/4”OD Rotary Shoe ( Not Dressed), 30”OD Set Screw Stabilizer w/ 7-5/8” Reg Conn, 16” OD Screw In Cement Shoe w/ 4-1/2” IF Conn K#: K015435

Choice of 8 - Lots 572-579 572 3 A 4-1/2” OD Boot Basket W/3-

1/2” REG Conn. K#: K24325

573 3 A 4-1/2” OD Boot Basket W/2-

7/8” REG Conn. K#: K24326


7/8” REG Conn. K#: K24327






3/8” REG Conn. K#: K24330


3/8” PAC Conn. F/4” Liner K#: K24331




579 3 A 3-1/8” OD Boot Basket W/ 2-3/8” PAC Conn. F/4” Liner K#: K25332

Choice of 7 - Lots 580-586 580 3 A (2) Assy 14598W Wilson Type

Junk Catchers f/145595 Junk Basket, Both Dressed, (1) w/ O.S. Retainer Ringer & Spare Retainer Ring K#: K29143

581 3 A (2) Assy # 472187006 Junk

Catchers (1) 2 3/8” & (1) 2 7/8” K#: K29151

582 3 A (2) Assy 47315 Junk Catchers

(1 Dressed) f/ 2 7/8” Tubing K#: K29150

583 3 A (3) Assy 47315 Junk Catchers

(1 Dressed) f/ 2 3/8” Tubing & (2) Not Dressed K#: K29149

584 3 A (2) Assy 14593W Wilson Type

Junk Catchers Both Dressed & Spare Retainer (Unused) f/14590 K#: K29146

585 3 A (3) Assy # 472187006 Junk Catchers (2) Dressed (1) 2 3/8” & 2-7/8" K#: K29152

586 3 A (2) Junk Catchers

(1) Wilson Type Assy 21735W & (1) 47318 Dressed f/ 2 3/8” Tubing K#: K29153

Choice of 7 - Lots 587-593 587 3 A (2) Assy. 21795W Wilson Type

Junk Catches Both Dressed (Unused) f/6635 Junk Basket K#: K29147


Junk Catchers Both Dressed w/ Spare Teeth K#: K29144


Junk Catchers (1) Dressed w/ Spare Teeth K#: K29145


Junk Catchers (1 Dressed) f/ 4572 Junk Basket K#: K29142




591 3 A (2) Assy 21790W Wilson Type Junk Catchers (1) Dressed f/ 4572 Junk Basket, K#: K29141


Junk Catchers (1) Dressed f/4572 Junk Basket & Extra Teeth K#: K29140

593 3 A Assy. 21780W Wilson Type

Junk Catcher Dressed f/ 7453 Junk Catcher K#: K29148

594 3 A (2) Wash Pipe Basket Catcher

Bodies; 7-5/8" WP & 5-3/4" WP K#: K29120

Choice of 2 - Lots 595-596 595 3 A 5-3/4” WP Junk Basket w/ (2)

7/8”- 3/4”, (1) 3/4”- 5/8” Traps K#: K29129

596 3 A 4-1/2” OD Mouse Trap w/ 4-1/2”

WP Top Sub & 7/8” Rod Trap K#: K29128

Choice of 2 - Lots 597-598 597 3 A 32-3/4” OD, 6’ L Bladed

Watermelon Mill w/ 7-5/8” Reg Box X Pin Conn Asset #14051 K#: K27451

MILLS 598 3 A 17-3/8” OD, 7’ L Tapered String

Mill w/ 5-1/2” FH Pin X 7-5/8” Reg Box Conn Asset #14886 K#: K27452

Choice of 9 - Lots 599-607 599 3 A 17-1/2” OD Concave Mill w/ 6

5/8” Reg Conn K#: K27524

600 3 A 17-1/2” OD Bladed Tapered Mill

w/ 6-5/8” Reg Conn K#: K27483

601 3 A 14-1/4” OD, 5’6” L String Mill

w/ 6-5/8” Reg Box X Pin Conn K#: K27453

602 3 A 12-1/4” OD Concave Stabilizer

Mill w/ 6-5/8” Reg Conn K#: K25828




603 3 A 12-1/4” OD Concave Mill w/ 6-5/8” Reg Conn K#: K25826

604 3 A 12” OD Bladed Pilot Mill w/ 6-

5/8” Reg Conn K#: K27479

605 3 A 12” OD, 5’6” L String Mill w/ 6-

5/8” Reg Box X Pin Conn K#: K27455

606 3 A 10” OD Tapered Mill w/ 6-5/8”

Reg Conn K#: K27482

607 3 A 9-1/2” OD Flat Bottom

Stabilizer Mill w/ 6-5/8” Reg Conn K#: K25827

Choice of 7 - Lots 608-614 608 3 A 9-7/8” OD Bladed Stabilizer Mill

w/ 4-1/2 Reg & Packman Kutrite “Metal Muncher” K#: K25830

609 3 A 9-7/8” OD Bladed Stabilizer Mill

w/ Packman Kutrite “Metal Muncher”, 4-1/2” Reg Conn K#: K25829

610 3 A 9” OD Bladed Pilot Mill w/ 4-1/2” Reg Box Conn K#: K27477

611 3 A 9-3/4” OD, Bullnose Bladed

Pilot Mill w/ 4-1/2” Reg Box Conn K#: K27460

612 3 A 8-3/4” OD, Bullnose Pilot Mill

w/ 4-1/2” Reg Conn K#: K27462

613 3 A 8-3/4” OD, Bullnose Pilot Mill

w/ 4-1/2” Reg Conn K#: K27463


w/ 4-1/2” Reg Conn K#: K25834

Choice of 6 - Lots 615-620 615 3 A 8-3/4” OD Tapered Mill w/ 4-

1/2” Reg Conn K#: K27464


Mill w/ 4-1/2” Reg Conn K#: K25838




617 3 A 8-3/4” OD Concave Stabilizer Mill w/ 4-1/2” Reg Conn K#: K25836


Stabilizer Mill w/ 4-1/2” Reg Conn Asset #20712 K#: K25831

619 3 A 8-3/4” OD Piranha Stabilizer

Mill w/ 4-1/2” Reg Conn Asset #20712 K#: K25832

620 3 A 8-1/2” OD Flat Bottom Mill w/ 4-

1/2” Reg Conn Asset #12368 K#: K27474

Choice of 8 - Lots 621-628 621 3 A 8-3/8” OD Flat Bottom Mill w/ 4-

1/2” Reg Conn Asset #14839 K#: K25835


w/ 4-1/2” Reg Conn Asset #14849 K#: K27475

623 3 A 8-1/4” OD Bladed Tapered Mill w/ 4-1/2” Reg Conn Asset #12217 K#: K27459

624 3 A 7-7/8” OD Flat Bottom Mill w/ 4-

1/2” Reg Conn Asset #14840 K#: K25837












Choice of 7 - Lots 629-635 629 3 A 9-7/8” OD, 6’ L String Mill w/ 4-

1/2” FH Box X Pin Conn Asset #21011 K#: K27454

630 3 A 9-7/8” OD Pilot Mill w/ 2 7/8” IF

Pin X 4-1/2” FH Box K#: K27484

631 3 A 8” OD String Mill w/ 4-1/2” FH

Box X Pin Asset #21023 K#: K27469


Stabilizer Mill w/ 4-1/2” FH Conn Asset #20848 K#: K25840

633 3 A 11-3/4” Watermelon String Mill

w/ 4-1/2” IF Conn Asset #14994 K#: K27481

634 3 A 10-3/4” OD String Mill w/ 4-1/2”

XH Conn Asset #15017 K#: K27480

635 3 A 8-3/4” OD, 5’6” L String Mill w/ 4-1/2” XH Box X Pin Asset #20450 K#: K27458

Choice of 6 - Lots 636-641 636 3 A 6-1/8” OD x 3-1/2” Reg Bladed

Stabilizer Mill w/ Packman Kutrite “Metal Muncher” w/ 3 ½” Reg Conn K#: K25842

637 3 A 6” OD Bladed Stabilizer Mill w/

3-1/2” Reg w/ Packman Kutrite “Metal Muncher” w/ 3 ½” Reg Conn Asset #10978 K#: K25841


w/ 3-1/2” Reg w/Packman Kutrite “Metal Muncher” K#: K25752

639 3 A 7-5/8” OD Stabilizer Mill w/ 3-

1/2” Conn Asset #16100 K#: K25848

640 3 A 7” OD Flat Bottom Stabilizer





641 3 A 7” OD Concave Mill w/ 3-1/2” Reg Conn Asset #15000 K#: K25850

Choice of 8 - Lots 642-649 642 3 A 6-3/4” OD Piranha Stabilizer







Stabilizer Mill w/ 3-1/2” Reg Conn Asset #20299 K#: K25844

646 3 A 6-5/8” OD, Tapered Mill w/ 3-

1/2” Reg Box Conn Asset #N/A K#: K27461

647 3 A 6-1/8” OD Bladed Stabilizer Mill w/ 3-1/2” Reg Conn Asset #14401 K#: K25757

648 3 A 6-1/4” OD Tapered Mill w/ 3-

1/2” Reg Conn Asset #11918 K#: K25763


1/2” Reg Conn Asset #924 K#: K27467

Choice of 8 - Lots 650-657 650 3 A 6” OD Tapered Mill w/ 3-1/2”

Reg Conn Asset #628 K#: K25765


3-1/2” Reg Conn Asset #11544 K#: K25753


3-1/2” Reg Conn Asset #11542 K#: K25758




653 3 A 6” OD Bladed Stabilizer Mill w/ 3-1/2” Reg Conn Asset #11555 K#: K25756


3-1/2” Reg Conn Asset #11549 K#: K25759

655 3 A 6” OD Concave Stabilizer Mill


656 3 A 6” OD Junk Stabilizer Mill w/ 3-

1/2” Reg Conn Asset #12168 K#: K25846

657 3 A 6” OD Piranha Stabilizer Mill w/

3-1/2” Reg Conn Asset #20381 K#: K25845

Choice of 8 - Lots 658-665 658 3 A 5-7/8” OD Tapered String Mill

w/ 3-1/2” Reg Pin X 2-7/8” 8RD w/ Nipple Asset #88248 K#: K27471

659 3 A 5-7/8” OD Tapered Mill w/ 3-1/2” Reg Conn Asset #07924 K#: K25764


1/2” Reg Conn Asset #20865 K#: K25762

661 3 A 5-3/4” OD Concave Mill w/ 3-

1/2” Reg Conn Asset #14842 K#: K25847


1/2” Reg Conn Asset #89247 K#: K27465



664 3 A 5-5/16” OD Bladed Stabilizer





665 3 A 5-1/4” OD Bladed Stabilizer Mill w/ 3-1/2” Reg Conn Asset #21130 K#: K25754

Choice of 7 - Lots 666-672 666 3 A 7-5/8” OD Pilot Mill w/

Packman Kutrite “Metal Muncher” w/ 2-3/8” IF Pin X 2 7/8” IF Box Asset #20870 K#: K27456

667 3 A 9-7/8” OD Pilot Mill w/ 2-3/8” IF

Pin X 2-7/8” IF Box Asset #20874 K#: K27485


Pin x 2-7/8” IF Box Asset #20885 K#: K27496




Pin X 2-7/8” IF Box Asset #20456 K#: K27457

671 3 A 8-3/4” OD Pilot Mill w/ 2-3/8” IF Pin x 2-7/8” IF Box Conn Asset #21275 K#: K27499


Pin x 2-7/8” IF Box Conn Asset #20882 K#: K27497

Choice of 7 - Lots 673-679 673 3 A 8-5/8” OD Pilot Mill w/ 2-3/8” IF

Pin x 2-7/8” IF Box Conn Asset #20409 K#: K27498






X 2-7/8” IF Box (needs Kutrite) Asset #20872 K#: K27486




677 3 A 6-5/8” OD Pilot Mill w/ 2-3/8” IF Pin x 2-7/8” IF Box Conn Asset #20883 K#: K27500

678 3 A 7-7/8” OD String Mill w/ 2-7/8”

IF Box X Box Asset #20408 K#: K27487

679 3 A 6” OD String Mill w/ 2-7/8” IF


Choice of 8 - Lots 680-687 680 3 A 6” OD String Mill w/ 2-7/8” IF


681 3 A 6” OD String Mill w/ 2-7/8” IF


682 3 A 5-1/2” OD String Mill w/ 2-7/8”

IF Box X Pin Asset #21152 K#: K27472

683 3 A 5-1/4” OD String Mill w/ 2-7/8” IF Box X Pin Asset #83670 K#: K27473

684 3 A 6-5/8” OD Bullnose Tapered

Mill w/ 2-7/8” IF Box Asset #20867 K#: K27502


7/8” IF Box Conn Asset #06160 K#: K27501

686 3 A 6” OD Bullnose Mill w/ 2-7/8” IF

Box Conn Asset #21095 K#: K27503

687 3 A 6” OD Tapered Mill w/ 2-7/8” IF

Conn Asset #20866 K#: K27492

Choice of 7 - Lots 688-694 688 3 A 6-1/8” OD Junk Stabilizer Mill

w/ 2-7/8” Reg w/ Packman Kutrite “Metal Muncher” Asset #21272 K#: K25779




689 3 A 4-3/4” OD Piranha Stabilizer Mill w/ 2-7/8”Reg w/Packman Kutrite “Metal Muncher” Asset #20425 K#: K25768


w/ 2-7/8” Reg w/Packman Kutrite “Metal Muncher” Asset #20422 K#: K25773


7/8” Reg w/ Packman Kutrite “Metal Muncher” Asset #20204 K#: K25769


w/ 2-7/8” Reg w/Packman Kutrite “Metal Muncher” Asset #20846 K#: K25767

693 3 A 4-5/8” OD Bladed Mill w/ 2-7/8”

Reg w/ Packman Kutrite “Metal Muncher” Asset #20061 K#: K25770

694 3 A 4-5/8” OD Bladed Stabilizer Mill w/ 2-7/8” Reg w/Packman Kutrite “Metal Muncher” Asset #20421 K#: K25766


7/8” Reg Conn Asset #05610 K#: K25783


7/8” Reg Conn K#: K25775



698 3 A 4-3/4” Bladed Mill w/ 2-7/8”


699 3 A 4-3/4” Bladed Mill w/ 2-7/8”





700 3 A 4-5/8” Piranha Stabilizer Mill w/ 2-7/8” Reg Conn Asset #20482 K#: K25776

701 3 A 4-5/8” Bladed Mill w/ 2-7/8”


702 3 A 4-5/8” Bladed Mill w/ 2-7/8”


703 3 A 4-1/2” OD Bladed Mill w/ 2-7/8”


704 3 A 4-1/4” OD Bladed Mill w/ 2-7/8”

Reg Conn Asset# 21303 K#: K25774

Choice of 8 - Lots 705-712 705 3 A 4-3/4” OD String Mill w/ 2-3/8”

IF Box X Pin Conn Asset #20289 K#: K27507


707 3 A 4-5/8” OD String Mill w/ 2-3/8”

IF Box X Box Asset #21299 K#: K27509


3/8” IF Box Conn Asset# NA K#: K27466

709 3 A 4-5/8” OD String Mill w/ 2-3/8”

IF Box X Pin Asset #20700 K#: K27488

710 3 A 4-1/2” OD String Mill w/ 2-3/8”

IF Box X Pin Conn Asset #20869 K#: K27506

711 3 A 4-1/2” OD Bullnose Mill w/ 2-

3/8” IF Box Conn Asset #20847 K#: K27514





Choice of 7 - Lots 713-719 713 3 A 3-7/8” OD Piranha Stabilizer

Mill w/2-3/8" Reg & Packman Kutrite “Metal Muncher” K#: K25790

714 3 A 3-7/8”OD Concave Stabilizer

Mill w/ 2-3/8” Reg & Packman Kutrite “Metal Muncher” Asset #14848 K#: K25791

715 3 A 3-7/8”OD Concave Stabilizer

Mill w/ 2-3/8” Reg & Packman Kutrite “Metal Muncher” Asset #21327 K#: K22752


w/ 2-3/8” Reg & Packman Kutrite “Metal Muncher” Asset #21032 K#: K25784



718 3 A 3-7/8” OD Bladed Stabilizer Mill w/ 2-3/8” Reg & Packman Kutrite “Metal Muncher” Asset #21330 K#: K25785




w/ 2-3/8" Reg Conn. & Packman Kutrite "Metal Muncher" Kutrite K#: K29253

721 3 A 3 3/8” OD Bladed Stabilizer Mill

w/ Packman Kutrite “Metal Muncher” w/ 2 3/8” Reg Conn Asset #21502 K#: K25789

722 3 A 3.351” OD Bladed Mill w/ 2-3/8”

Reg Conn & Packman Kutrite “Metal Muncher” Asset #21110 K#: K22751




723 3 A 3-1/4”OD Concave Stabilizer Mill w/ 2-3/8” Reg & Packman Kutrite “Metal Muncher” Asset #20469 K#: K22753

724 3 A 3-1/8”OD Bladed Stabilizer Mill




Choice of 7 - Lots 726-732 726 3 A 7-5/8”OD Pilot Mill w/ 2-3/8”

Reg Pin X 2-7/8” IF Box Asset #20583 K#: K22771


3/8” Reg Conn Asset #20697 K#: K22763

728 3 A 4-3/4” OD Slicked String Mill w/

2-3/8” Reg Box X Pin Asset #20880 K#: K22769

729 3 A 4-3/4” OD String Mill w/ 2-3/8” Box Conn Asset #20879 K#: K22764




3/8” Reg Conn Asset #20862 K#: K22756

732 3 A 4-5/8” OD Bullnose Mill w/ 2-

3/8” Reg Conn Asset #13238 K#: K22773

Choice of 8 - Lots 733-740 733 3 A 4-5/8” Bladed Stabilizer Mill w/

2-3/8” Reg Conn Asset #14190 K#: K22772


3/8” Reg Conn Asset #21284 K#: K22760




735 3 A 4-1/2” OD Piranha Stabilizer Mill w/ 2-3/8” Reg Conn Asset #20845 K#: K25795

736 3 A 4-1/2” OD String Mill w/ 2-3/8”

Reg Box X Pin Conn Asset #20877 K#: K22768

737 3 A 4-1/2” OD Pilot Mill w/ 2-3/8”

Reg Pin X 2-3/8” IF Box Conn (needs Kutrite) Asset #21139 K#: K22765


3/8” Reg Conn Asset #20863 K#: K22755

739 3 A 4-1/4” OD String Mill w/ 2-3/8”

Reg Box Conn Asset #20500 K#: K22766


3/8” Reg Conn Asset #20859 K#: K22757


3/8” Reg Conn Asset #20864 K#: K22758

742 3 A 4-1/8” OD String Mill w/ 2-3/8”

Reg Box X Pin Asset #20702 K#: K22770






3/8” Reg Conn Asset #10115 K#: K22754


3/8” Reg Conn Asset #20679 K#: K22761




747 3 A 3-7/8” OD Junk Stabilizer Mill w/ 2-3/8” Reg Conn Asset #11838 K#: K22774





750 3 A 3-7/8” OD X-Bar Stabilizer Mill


751 3 A 3-3/4” OD String Mill w/ 2-3/8”


752 3 A 3-3/4” OD String Mill w/ 2-3/8”

Reg Box X Pin Conn Asset #20878 K#: K22767

753 3 A 3-3/4” OD Piranha Stabilizer Mill w/ 2-3/8” Reg Conn Asset #21043 K#: K25794


3/8” Reg Conn Asset #20698 K#: K22759



756 3 A (5) 4-3/8” OD & 4-3/4” OD Mills

w/ 2-3/8” Reg. Conn. (2) Bladed & (3) Bullnose K#: K29125

Choice of 2 - Lots 757-758 757 3 A 4” OD String Mill w/ 2-7/8” ‘F’

Hydril Conn Asset #13237 K#: K27470

758 3 A 3-7/8” OD String Mill w/ 2-3/8”

PAC Box X Pin Asset #20886 K#: K27468




Choice of 8 - Lots 759-766 759 3 A 4-5/8” OD X-Bar Mill w/ 2-7/8”

8RD Conn Asset #20851 K#: K27515

760 3 A 3.351” OD X-Bar Mill w/ 2-3/8”


761 3 A 3.351” OD X-Bar Mill w/ 2-3/8”


762 3 A 3.351” OD X-Bar Mill w/ 2-3/8”


763 3 A 3.303” OD String Mill w/ 2-3/8”

8-Round Conn K#: K29243

764 3 A 3-3/8” OD String Mill w/ 2-3/8”

8-Round Conn K#: K29244

765 3 A 3.351” OD String Mill w/ 2-3/8”


766 3 A 4” OD Tapered Mill w/ 2-3/8” 8RD Conn Asset #20849 K#: K27513

Choice of 7 - Lots 767-773 767 3 A 3-5/8” OD Flat Top Mill w/ 2-

3/8” PH-6 Conn & Packman Kutrite “Metal Muncher” Asset #21333 K#: K22788

768 3 A 3.351” OD Concave Mill w/ 2-

3/8” PH-6 Conn & Packman Kutrite “Metal Muncher” w/ 2-3/8” PH-6 Conn Asset #21312 K#: K22790


3/8” PH-6 Conn & Packman Kutrite “Metal Muncher” Asset #N/A K#: K22793

770 3 A 3.351” OD Concave Mill w/ 2-

3/8” PH-6 Conn & Packman Kutrite “Metal Muncher” Asset #21310 K#: K22789




771 3 A 3 ¼” OD Concave Mill w/ Packman Kutrite “Metal Muncher” Asset #21332 K#: K22792

772 3 A 3.303” OD Flat Top Mill w/ 2-

3/8” PH-6 Conn & Packman Kutrite “Metal Muncher” w/ 2-3/8” PH-6 Conn Asset #21340 K#: K22787

773 3 A 3-1/4” OD X-Bar Mill w/ 2-3/8”

PH-6 Conn & Packman Kutrite “Metal Muncher” Asset #21325 K#: K22791

Choice of 8 - Lots 774-781 774 3 A 3-3/4" Tapered Mill w/ Kutrite

K#: K29208

775 3 A 3-3/4” OD Tapered Mill w/ 2

3/8” PH-6 Conn Asset #21324 K#: K22800


3/8” PH-6 Conn Asset #21323 K#: K22799

777 3 A 3-3/8” OD Tapered Mill w/ 2-3/8” PH-6 Conn K#: K22796


3/8” PH-6 Conn Asset #N/A K#: K22798


3/8” PH-6 Conn Asset #N/A K#: K22797

780 3 A 3.351” OD X-Bar Bullnose Mill

w/ 2-3/8” PH-6 Conn (no Kutrite) Asset #21337 K#: K22795

781 3 A 3.351” OD X-Bar Bullnose Mill

w/ 2-3/8” PH-6 Conn (no Kutrite) Asset #21326 K#: K22794


w/ 2-1/16” CS Conn. K#: K29256


1-1/2” CS Hyd. Box Conn. K#: K29255




784 3 A 2-5/8” OD Bladed Mill w/ 1-1/2” CS Conn. K#: K29258

785 3 A 2-15/16” Bladed Mill w/ 1-1/2”

CS Conn. K#: K29257

786 3 A 3-1/4” OD Concaved Mill w/ 1-

1/2" CS Box Conn (Undressed) K#: K29254

787 3 A 2-7/8” OD String Mill w/ 1” CS

Box Conn. K#: K29248

788 3 A 2” OD String Mill w/ 1” CS

Conn K#: K29252

789 3 A 1-3/4” OD Mill w/ 1” CS Box

Conn. K#: K29250

790 3 A 2-1/4” OD Bladed Mill w/ 1-1/2”

MT Box Conn. K#: K29249


13/16” WFJ Box Conn. K#: K29247


13/16” WFJ Box Conn. K#: K29245

793 3 A 2-5/8” OD Bladed Mill w/ 1-

13/16” WFJ Box Conn. K#: K29251

794 3 A 2-1/4” OD Bladed Mill w/ 1-

13/16” WFJ Box Conn. K#: K29246

795 3 A (2) 18” OD Flat Bottom Mills w/

11-3/4" WP Conn K#: K30241

796 3 A Lrg Qty of Assorted

Wireline/Rod Mills Includes: Bladed, Bull Nose, Concaved Mills, Some w/ Kutrite K#: K30180

Choice of 6 - Lots 797-802 797 3 A 2-5/8”- 4-3/16” OD Taper Tap

W/ 4-1/2” XH Conn. K#: K24333




798 3 A 3”-3-3/4” OD Taper Tap W/ 2-7/8” IF Conn. K#: K24334

799 3 A 2-3/4”- 3-1/8” OD Taper Tap W/

2-3/8” 8-Round Conn. K#: K24335

800 3 A QTY (2) Taper Taps

(1) 1-9/16” – 2-1/4” OD W/1-13/16” WFS Conn. (1) 1-7/16” – 2-1/8”-3/4” OD SR- 225-2004 K#: K24336

801 3 A 3-7/8” ID – 2” ID Box Tap W/2-

7/8” IF Conn. K#: K24338

802 3 A Large QTY of Various Sizes of

1” Box Taps K#: K24337

Choice of 8 - Lots 803-810 803 3 A 6-1/8” OD Casing Swage w/ 3-

1/2” Reg Conn K#: K27517

804 3 A 6-1/8” OD Casing Swage w/ 2-

7/8” IF Box Conn K#: K27516

805 3 A 4.800” OD Casing Swage w/ 2-3/8” Reg Conn K#: K27519


3/8” Reg Conn K#: K27518


3/8” Reg Conn K#: K27520


3/8” Reg Conn K#: K27521


3/8” Reg Conn K#: K27522

810 3 A 2” OD Tubing Swage w/ 1-

13/16” WFJ Conn K#: K27523

811 3 A (785’) (25 JTS) of 9” OD PFT

Wash Pipe W/ 9” PFT Conns K#: K27617




WASHPIPE 812 3 A (330’) (9 JTS) of 9” Wash Pipe

(Uncut) (NOTE: Unmilled Raw Ends) K#: K27618

813 3 A (1107’) (35 JTS) of 8-1/8” OD

WP Wash Pipe W/ 8-1/8” WP Conns K#: K27569

814 3 A (318’) (10 JTS) of WP 7” OD

Wash Pipe W/ 7" WP Conns K#: K27567

815 3 A (501’) (17 JTS) of 5-1/2” OD WP

Wash Pipe W/ 5-1/2” WP Conns K#: K27571

816 3 A (351’) (12 JTS) of 5” OD WP

Wash Pipe W/ 5” WP Conns K#: K27570

817 3 A (915’) (29 JTS) of 4-1/2” OD

Wash Pipe W/ 4-1/2" WP Conns K#: K24667

818 3 A (1076’) (33 JTS) of 4-3/8” WP Wash Pipe W/ 4-3/8” WP Conns K#: K27572

819 3 A (376’) (12 JTS) of 3-3/4” OD

COT Wash Pipe W/ 3-3/4” COT Conns K#: K24666

820 3 A (216’) (7 JTS) of 3-5/8” WP


821 3 A (137’) (6 JTS) of 3-1/4” WP


822 3 A Washpipe (10) 5-1/2"- (4) 4-1/2"

- (3) 3-3/4" COT 2 0f 3 3-3/4" COT W/ Lift Plugs, Needs Connection Work K#: K27094

Choice of 7 - Lots 823-829 823 3 A 9-1/2" WP Rotary Shoe & 10-

3/4" WP Shoe (NOT Dressed) K#: K30231




824 3 A Qty (3) 9” PFT Rotary Shoes (1) 9-⅞” OD x Slick ID Rough Packer Type, (1) 9-⅝” OD x Slick ID Rough Tooth Type, & (1) 9” OD x 7-⅝” ID Packer Type K#: K24106

825 3 A Qty (3) 9” PFT Rotary Shoes

(2) 9-⅞” OD Rough Cross Bar & (1) 9” x 48” Shoe Stock K#: K24105


(2) 9-⅞” OD Rough Cross Bar & (1) 9-⅜” OD x Slick ID Rough Tooth Type K#: K24104


(1) 9-⅝” OD x Slick ID Rough Tooth Type, (1) 9-⅜” OD x Slick ID Rough Packer Type, & (1) 9” OD x Slick ID Cutlip Type K#: K24109


(1) 9-⅞” OD x Slick ID Packer Type, (1) 9-⅞” OD W/ Cable Packer Type, & (1) 9-⅞” Cross Bar Type K#: K24101


(1) 9-⅞” OD x Slick ID Rough Cutlip/Packer type, (1) 9-⅞” OD W/ Cable Packer Typer, (1) 9-½” OD x Slick ID Packer Type K#: K24102

Choice of 4 - Lots 830-833 830 3 A Qty (4) 9" PFT Rotary Shoes

(2) 9” PFT 9-⅞” OD x Slick ID Rough Packer Type, (1) 9” PFT 9-½” OD x Slick ID Rouch Packer Type, & (1) 9-⅞” PFT 9-⅞” OD x Slick ID Rough Packer Type K#: K24103

831 3 A Qty (3) 9" PFT Rotary Shoes

(2) 9-⅞” OD x Slick ID Rough Cutlip, & (1) 9-½” OD x 7-⅝” ID Rough Packer Type K#: K24108

832 3 A Qty (3) 9" PFT Rotary Shoes

(1) 9-⅞” OD Rough Cross Bar, (1) 9-⅞” OD x Slick ID Cutlip, & (1) 9-½” OD x 7-⅝” ID Packer Type K#: K24107

833 3 A 9” WP Rotary Shoe 9-5/8” OD x

5-1/2” ID Rough Wavy Bottom Type 9-5/8” OD x 5-1/2” ID Rough Wavy Bottom Type K#: K27640

Choice of 2 - Lots 834-835 834 3 A Qty (1) 9” PFT Top Bushing w/

4-1/2" FH Conn K#: K24177

835 3 A Qty (1) 9” PFT Screw In Top

Busing w/ 4-1/2" FH & 2-7/8" PH-6 Connections K#: K24178




Choice of 3 - Lots 836-838 836 3 A 9" PFT Washpipe Extension

10'L K#: K23840

837 3 A 9” PFT Shoe Stock &


838 3 A 9" PFT Shoe Stock 49-1/2"

Long K#: K23843

Choice of 10 - Lots 839-848 839 3 A Qty (1) 8-1/2” WP 8-3/8” OD x

6-3/4” ID Rough Packer Type Rotary Shoe K#: K24110

840 3 A Qty (3) 8-1/8” WP Rotary Shoes

(1) 8-3/4” OD x Slick ID Cutlip & (2) 8-3/4” OD Cross Bar K#: K24114


(1) 8-5/8” OD Cross Bar, (1) 8-3/4” OD x Slick ID Packer Type, & (1) 8-3/4” OD x Slick ID Rough Packer Type Cripled Shoe K#: K24112

842 3 A Qty (3) 8-1/8” WP Rotary Shoes (1) 8-5/8” OD Cross Bar, (1) 8-1/2” OD x 5-1/8” ID Packer Type, & (1) 8-1/2” OD x Slick ID Rough Packer Type K#: K24111


(1) 8-3/4” OD x Slick ID Rough Packer Type, (1) 8-3/4” OD x Slick ID Rough Cutlip Type, & (1) 8-1/8” OD x Slick ID Cutlip Type K#: K24117


(1) 8-5/8” OD x Slick ID Packer Cut Lip Type, (1) 8-3/4” OD x Slick ID Packer Type, (2) 8-1/8” OD Shoe Stock K#: K24116


8-5/8” OD x Slick ID Packer Cutlip Type, (1) 8-5/8” OD x Slick ID Paker Cutlip Type, & (1) 8-3/8” OD x Slick ID Rough Packer Type K#: K24119


(1) 8-3/4” OD x Slick ID Rough Cutlip Type, (1) 8-3/4” OD x Slick ID Rough Packer Type, & (1) 8-3/4” OD x Slick ID Rough Cut Lip Type K#: K24118


(1) 8-5/8” OD Cross Bar, (1) 8-3/4” OD x Slick ID Packer Type, & (1) 8-3/4” OD x Slick ID Cutlip Type K#: K24113




848 3 A Qty (4) 8-1/8” WP Rotary Shoes (1) 8-3/4” OD x Slick ID Tooth Type, (1) 8-3/4” OD x Slick ID Rough Packer Type, (1) 8-3/4” OD x Slick ID Packer Type, & (1) 8-5/8” OD x Slick ID Packer Cutlip Type K#: K24115

Choice of 5 - Lots 849-853 849 3 A Qty (1) 8-1/8” WP Screw In Top

Bushing w/ 4-1/2" FH Box Conn K#: K24180

850 3 A Qty (1) 8-1/8” WP Screw In Top

Bushing w/ 4-1/2" FH Box Conn K#: K24182


Bushing w/ 4-1/2" Fh & 2-7/8" PH-6 Connections K#: K24179


Bushing w/ 4-1/2" Fh & 2-7/8" PH-6 Connections K#: K24181

853 3 A 2-7/8” IF J-Sub w/ 8-1/8” WP

Bushing K#: K29123

Choice of 3 - Lots 854-856 854 3 A Qty (1) 8-1/8” WP Wash Pipe

Extension w/ 5-1/2" Duck Nest K#: K24184

855 3 A 8-1/8” OD x 5'7"L Washpipe


856 3 A Qty (1) 8-1/8” WP Wash Pipe

Extension w/ 4-1/2" Duck Nest K#: K24183

Choice of 6 - Lots 857-862 857 3 A Qty (4) 7-5/8” WP Rotary Shoes

(1) 7-7/8” OD x 4" ID Stop Rough Cutlip Packer Type, (1) 7-7/8” OD x 4’ ID Stop Packer Type, (1) 7-7/8” OD x Slick ID Packer Type, & (1) 7-7/8” OD x Slick ID Rough Packer Type K#: K24125


(1) 7-7/8” OD Rough Crossbar, (1) 7-7/8” OD x Slick ID Cutlip Packer Type, & (1) 7-7/8” OD x Slick ID Rough Cutlip Packer Type K#: K24123


(1) 8-3/8” OD Crossbar Rough Packer Type, (1) 8-1/4” OD x 6-5/8” ID Rough Packer Type, & (1) 7-7/8” OD x Slick ID Rough Cutlip Packer Type K#: K24120




860 3 A Qty (3) 7-5/8” WP Rotary Shoes (1) 7-7/8” OD x Slick ID Packer Type, (1) 7-7/8” OD x 6-1/8” ID Rough Packer Type, & (1) 7-7/8” OD Crossbar K#: K24124


(1) 8-5/8” OD x Slick ID Rough Packer Type, (1) 7-7/8” OD x 6-3/8” ID W X-Bar Packer Type, & (1) 8-3/4” OD x Slick ID Packer Type K#: K24121


(1) 8-3/4” OD x Slick ID Cutlip Packer Type, (1) 7-7/8” OD x Slick ID Cutlip Packer Type, (1) 7-7/8” OD x Slick ID Rough Packer Type K#: K24122

Choice of 5 - Lots 863-867 863 3 A Qty (1) 7-5/8” WP Top Bushing

w/ 4-1/2” FH Box Conn (Asset # 13966) K#: K24187

864 3 A Qty (1) 7-5/8” WP Top Bushing

w/ 4-1/2” FH Box & 2-7/8” PH-6 Pin W/ 4-1/2” FH Box & 2-7/8” PH-6 Pin K#: K24185


w/ 4-1/2” FH Box Conn (Asset # 20818) K#: K24186

866 3 A 2-7/8” IF J-Sub w/ 7-5/8” WP Bushing K#: K29122

867 3 A Qty (1) 7-5/8” WP Wash Pipe

Extension w/ 5-1/2” Duck Nest K#: K24188

Choice of 7 - Lots 868-874 868 3 A Qty (3) 7” WP Rotary Shoes

(1) 7-1/8” OD x 3-1/2” ID W/ Bushing Inserts Rough Packer Type, (1) 7-1/8” OD x 3-1/2” ID W/Bushing Inserts Rough Packer Type, & (1) 7-5/8” OD x Slick ID Cutlip Packer Type K#: K24128

869 3 A Qty (3) 7” WP Rotary Shoes

(1) 7-5/8” OD x Slick ID Rough Packer Type, (1) 7-5/8” OD x Slick ID Cutlip Type, & (1) 7-5/8” OD Crossbar Tooth Type K#: K24127

870 3 A Qty (3) 7” WP Rotary Shoes

(1) 7-5/8” OD x Slick ID Packer Type, (1) 7-5/8” OD x Crossbar Tooth Type, & (1) 7-5/8” OD x Slick ID Rough Cutlip Packer Type K#: K24126

871 3 A Qty (1) 7” WP Top Bushing

W/ 4-1/2” FH Box Conn (Asset # 20438) K#: K24190




872 3 A Qty (1) 7” WP Top Bushing W/ 4-1/2” FH Box Conn (Asset # 20437) K#: K24189

873 3 A Qty (1) 7” WP Wash Pipe

Extension W/ 5-1/2” ID Duck Nest K#: K24192

874 3 A Qty (1) 7” WP Wash Pipe

Extension W/ 4-1/2” ID Duck Nest K#: K24191

Choice of 2 - Lots 875-876 875 3 A Rotary Shoe 6-5/8" OD x 5-7/8"

ID W/6-5/8" WP Box 9.88' L K#: K27095

876 3 A Rotary Shoe 6-5/8" OD x 5-3/4"

ID W/ 6-5/8" WP Box 124.05"L K#: K27096


(1) 6-1/2” OD x 4-5/8” ID Packer Type, (1) 5-3/4” OD x Pinged Tooth Type, & (1) 6” OD x Pinged W/ Wire Packer Type K#: K24133

878 3 A Qty (3) 5-3/4” WP Rotary Shoes (2) 6-1/8” OD x 4-3/4” ID Packer Type & (1) 6” OD x 2-7/8” ID Packer Type K#: K24129


(2) 6-1/2” OD x 4-3/4” ID Packer Type & (1) 6” OD x 4-5/8” ID Packer Type K#: K24130


(1) 6-5/8” OD x 4-1/4” ID Packer Type, (1) 5-3/4” Wash Over Shoe, (1) 6-1/8” x 4-1/2” ID Packer Type K#: K24131


(1) 6-1/8” OD x 3/4” ID Packer Type, (1) 5-3/4” OD x Slick ID Packer Type, (1) 6” OD x 4-1/2” ID Packer Type K#: K24132


w/ 2-7/8” IF Box Conn W/ 2-7/8” IF Box Conn (Asset # 20817) K#: K24194


w/ 2-7/8” IF Box Conn (Asset #11821) K#: K24195




884 3 A Qty (1) 5-3/4” WP Top Bushing w/ 3-1/2” 8-Round Box Conn (Asset # 20816) K#: K24193

Choice of 2 - Lots 885-886 885 3 A Qty (1) 5-3/4” WP Wash Pipe

Extension w/ 5-3/4” WP Box Conn, W/ 4” ID Duck Nest (Asset# N/A) K#: K24196

886 3 A (31’) ((1) JT) of 5-3/4” OD WP

Wash Pipe w/ 5-3/4" WP Conns K#: K27568


(2) 6” OD Rough Reverse Drag, (1) 6” OD x Slick ID Rough Packer Type, (1) 5-3/4” Rough Crossbar Tooth Type, & (1) 5-3/4” OD x Window Shoe Rough Packer Type K#: K24135


(1) 6” OD Rough Crossbar Tooth Type, (1) 6-5/8” x Slick ID Washing Shoe Tooth Type, (1) 6-1/8” x Slick ID Rough Wavy Bottom Packer Type, (1) 5-1/2” OD x Slick ID Tooth Type Washing Shoe, & (1) 6-1/2” OD Rough Crossbar Tooth Type K#: K24138

889 3 A Qty (5) 5-1/2” WP Rotary Shoes (1) 6” OD x Slick ID Tooth Type Washing Shoe, (1) 6-1/8” OD x 4-1/2” ID Rough Packer Type, (1) 6” OD x 3-1/2” ID Rough Packer Type, (1) 6-1/8” OD x 4-5/8” ID Rough Packer Type, & (1) 6-1/4” OD x 4-1/2” ID Rough Packer Type K#: K24141


(1) 6-1/8” OD x 4-5/8” ID Rough Packer Type, (1) 6” OD x Slick Inside Rough Packer Type, (1) 6-1/8” OD x Slick ID Rough Packer Type, (1) 6” OD Rough Crossbar Tooth Type, & (1) 5-5/8” OD x Slick ID Cutlip Type K#: K24136


(1) 6” OD Rough Crossbar Tooth Type, (1) 5-1/2” OD x Slick ID Tooth Type Washing Shoe, (1) 6” OD x 4-3/4” ID Rough Packer Type Window Shoe, (1) 5-1/2” OD x Slick ID Cutlip Type W/ Catchers, & (1) 6-1/8” Rough Crossbar Tooth Type K#: K24140


(1) 5-3/4” OD Rough Crossbar Tooth Type, (1) 6-3/8” OD Rough Crossbar Tooth Type, (1) 6” OD x 4” ID Rough Packer Type, (1) 6” OD x 4-3/8” ID Rough Packer Type, & (1) 5-3/4” OD x 4-3/8” ID Rough Packer Type K#: K24137




893 3 A Qty (4) 5-1/2” WP Rotary Shoes (2) 6-1/8” OD x 3-1/2” ID Rough Packer Type, (1) 6-1/8” OD Window Shoe Rough Packer Type, & (1) 6” OD x 4-1/2” ID Rough Packer Type K#: K24134


(1) 5-1/2” Stock Pinged, (1) 6” OD x 4-1/2” ID Rough Packer Type, (1) 6-1/8” OD x 4-5/8” ID Rough Packer Type, & (1) 6” OD x 4-1/2” ID Rough Reverse Drag K#: K24139






(2) 5-3/8” OD x Slick ID Rough Packer Type & (2) 5-3/8” OD x Slick ID Packer Type K#: K24143

898 3 A Qty (3) 5” WP Rotary Shoes (1) 5-1/2” OD W/ Wire Packer Type, (1) 5-3/8” OD x 4” ID W/ Wire Rough Packer Type, & (1) 5-3/8” OD x 4” ID W/ Wire Rough Packer Type K#: K24142

899 3 A Qty (1) 5” WP Top Bushing w/

2-3/8” IF Box Conn (Asset # 21226) K#: K24199

900 3 A Qty (1) 4-5/8"OD, 2-7/8” 8-

Round Rotary Shoe, Slick ID Cutlip Type K#: K24176

901 3 A (3) 5" WP Washpipe Rotary

Shoes 5-3/4"OD x 4"ID w/ Wire, 5-3/8"OD x 4"ID w/ Wire, & (1) Shoe Stock K#: K24144

Choice of 9 - Lots 902-910 902 3 A (2) 4-1/2” WP String Baskets &

(1) Flapper Retainer K#: K29130


(1) 4-5/8” OD x 3-1/4” ID Rough Packer Type, (1) 4-3/4” OD x Slick ID Washover Tooth Type, (1) 4-1/2” OD x Slick ID Tooth Type Washing Shoe, (1) 4-1/2” OD x 3-1/2” ID Rough Packer Type, & (1) 4-3/4” OD x 3-3/4” ID Rough Packer Type K#: K24149




904 3 A Qty (5) 4-1/2” WP Rotary Shoes (1) 4-5/8” OD x 3-1/2” ID Rough Packer Type, (1) 4-5/8” OD x Slick ID Packer Type, (1) 4-5/8” OD X Slick ID Rough Packer Type, (1) 4-3/4” OD x Rough Crossbar Tooth Type, & (1) 4-5/8” OD Crossbar (Needs Repair) K#: K24151


(1) 4-1/2” OD Shoe Stock, (1) 4-1/2” OD x 3-1/8” ID Rough Flat Type, (1) 4-3/4” OD x 3-1/2” ID Rough Packer Type, (1) 4-5/8” x 3-21/32” ID Rough Packer Type, & (1) 4-5/8” OD x 3-1/2” ID Rough Packer Type K#: K24146


(1) 5-3/8” OD Rough Crossbar Tooth Type, (1) 4-5/8” x Slick ID Rough Packer Type, (1) 4-5/8” OD x 3-1/2” ID Rough Reverse Drag, (1) 4-3/4” OD x Slick ID Rough Packer Type, & (1) 4-3/4” OD x 3-1/2” ID Rough Packer Type K#: K24157


(2) 4-5/8” OD x Slick ID Rough Packer Type, (1) 4-5/8” Rough Crossbar Tooth Type, (1) 4-5/8” OD x 3-3/8” ID Pinged Rough Packer Type, & (1) 4-5/8” OD x Slick ID Rough Packer Type K#: K24154

908 3 A Qty (5) 4-1/2” WP Rotary Shoes (1) 4-5/8” OD x 3-1/2” ID Rough Tooth Type, (1) 4-5/8” OD x 3-1/2” ID Rough Packer Type, (1) 4-3/4” OD x 3-5/8” ID Rough Reverse Drag, (1) 4-1/2” OD x 3-3/8” ID W/ Wire Rough Packer Type, & (1) 4-5/8” OD Rough Crossbar Tooth Type K#: K24155


(1) 4-5/8” OD x 3-21/32” ID Packer Type, (1) 4-5/8” OD x 3-1/4” ID Packer Type, (1) 4-5/8” OD x 3-1/2” ID Packer Type, & (1) 4-3/4” OD x Slick ID Cutlip Type K#: K24161


(1) 4-5/8” OD Rough Crossbar Tooth Type, (1) 4-5/8” OD x 3-1/2” ID Rough Packer Type, (1) 4-5/8” OD x 3-1/2” ID Rough Reverse Drag, (1) 4-1/2” OD x 3-3/16” ID Rough Wavy Bottom, & (1) 4-5/8” OD x 3-1/2” ID Rough Packer Type K#: K24159


(2) 4-3/4” OD Rough Crossbar Tooth Type, (1) 5-3/8” OD x 4-1/2” ID Rough Packer Type, (1) 5-3/8” OD Rough Crossbar Tooth Type, & (1) 4-5/8” OD Pinged W/ Wire Rough Wavy Bottom K#: K24145




912 3 A Qty (5) 4-1/2” WP Rotary Shoes (1) 4-3/4” OD x 2-3/4” ID Rough Reverse Drag, (1) 4-3/4” OD x Slick ID W/ Wire Rough Packer Type, (1) 4-3/4” OD x 2-3/4” ID Rough Packer Type, (1) 5-3/8” OD x 3-1/2” ID W/ Wire Rough Packer Type, & (1) 4-5/8” OD x Slick ID Tooth Type K#: K24156


(1) 4-5/8” OD x Slick ID Packer Type, (1) 4-5/8” OD x Slick ID Rough Packer Type, (1) 4-1/2” OD Rough Crossbar Tooth Type, (1) 4-5/8” OD W/ Wire Tooth Type, & (1) 4-3/4” OD x 2-3/4” ID Rough Packer Type K#: K24152


(1) 4-3/4” OD X 2-3/4” ID Rough Packer Type, (1) 4-3/4” OD x 3-1/2” ID Rough Packer Type, (1) 4-3/4” OD Rough Crossbar Tooth Type, (1) 4-3/4” OD x 3-1/2” ID Rough Packer Type, & (1) 4-1/2” OD x 3-1/2” ID Rough Packer Type K#: K24158


(1) 4-5/8” OD Rough Crossbar Tooth Type, (1) 4-1/2” OD Rough Crossbar Tooth Type, (1) 4-5/8” OD x 3-1/2” ID Packer Type, (1) 4-3/4” OD x 2-3/8” ID Packer Type, & (1) 4-3/4” OD x 3-7/8” ID Packer Type K#: K24153

916 3 A Qty (5) 4-1/2” WP Rotary Shoes (1) 4-5/8” OD Rough Crossbar Tooth Type, (1) 4-3/4” OD x 3-1/2” ID Rough Packer Type, (1) 4-5/8” Rough Crossbar Tooth Type, (1) 4-3/4” OD x 3-1/2” ID Rough Packer Type, & (1) 4-3/4” OD x 3-1/2” ID Rough Cutlip Packer Type K#: K24148


(1) 4-3/4” OD Rough Crossbar Tooth Type, (1) 4-3/4” OD x 3-1/16” ID Rough Packer Type, (1) 4-3/4” OD x 3” ID Rough Packer Type, (1) 4-3/4” OD x 2-3/4” ID Rough Cutlip Type, & (1) 4-3/4” OD x 3-1/2” ID Rough Packer Type K#: K24147


(1) 4-5/8” Rough Crossbar Tooth Type, (1) 4-5/8” OD x 4” ID Packer Type, (1) 4-3/4” OD x 3-5/8” ID Rough Packer Type, (1) 4-5/8” OD x 4-1/4” ID Rough Crossbar, & (1) 4-3/4” OD Pinged Rough Packer Type K#: K24150


(1) 4-5/8” OD x 2-7/8” ID Rough Packer Type, (1) 4-5/8” OD x 2-3/4” ID Rough Packer Type, (1) 4-3/4” OD x Slick ID Rough Packer Type, & (1) 4-5/8” OD x 3-1/2” ID Packer Type K#: K24160

920 3 A Qty (1) 4-1/2” WP Washpipe

Extension w/ 4-1/2” WP Conn W/ 2-3/8” Duck Nest (Asset# N/A) K#: K24258





w/ 2-7/8” IF Box (Asset #78021) K#: K24253


w/ 2-7/8” IF Box Conn (Asset # N/A) K#: K24256



924 3 A Top Bushing 4-1/2"WP W/2-

3/8"IF Box K#: K015433


w/ 2-3/8” IF Box Conn (Asset # 20667) K#: K24200

926 3 A Qty (1) 4-1/2" WP Top Bushing

w/ 2-3/8” IF Box & 2-3/8” 8-Round Box Inside (Asset # 21306) K#: K24252

927 3 A Qty (1) 4-1/2" WP Top Bushing w/ 2-3/8” 8-Round Box Conn (Asset # 10661) K#: K24251


w/ 2-3/8” 8-Round Box Conn (Asset #12361) K#: K24255


w/ 2-3/8” 8-Round Box Conn (Asset #1014) K#: K24257

930 3 A 4-1/2” WP J-Slot Bushing

K#: K29124

931 3 A (9) 4-1/2” WP Lifting Plugs

K#: K29186

932 3 A Canfield Bushing w/ Various

Stops 1-7/8” IP x 4-1/2” OD Canfield Bushing, (2) 2-3/8” 8-Round Bushing w/ 1” Stop Rod, 1-13/16” WFJ x 1-13/16” WFJ w/ 2-3/4” OD Stop Rod. K#: K30133




Choice of 7 - Lots 933-939 933 3 A Qty (5) 4-3/8” RFJ Rotary

Shoes (1) 4-1/2” OD Pinged Flat Type, 91) 4-1/2” OD x 3-1/2” ID Packer Type, (1) 4-3/4” OD Stock, (1) 4-1/2” OD x 3-1/2” ID Packer Type, & (1) 4-1/2” OD Rough Crossbar Tooth Type K#: K24163

934 3 A Qty (4) 4-3/8” RFJ Rotary

Shoes (1) 4-1/2” OD x 3-1/8” ID Bored W/ Catcher Packer Type, (1) 4-1/2” OD Crossbar Tooth Type, (1) 4-1/2” OD x 3-5/8” ID Pinged Flat Type, & (1) 4-3/8” OD x 3-1/16” ID Packer Type K#: K24162

935 3 A Qty (4) 4-3/8” RFJ Rotary

Shoes (1) 4-5/8” OD x 3-1/2” ID Packer Type, (1) 4-5/8” OD x Slick ID Packer Type, (1) 4-3/8” OD x 3-3/16” ID Wavy Bottom Type, & (1) 4-3/4” OD x 3-21/32” ID Packer Type K#: K24164

936 3 A Qty (3) 4-3/8” RFJ & (1) 4-3/8”

WP Rotary Shoes (1) 4-5/8” OD x 3-5/8” ID Packer Type, (1) 4-1/2” Rough Crossbar Tooth Type, (1) 4-3/8” OD Rough Crossbar Tooth Type, & (1) 4-5/8” OD x Slick ID Packer Type K#: K24165

937 3 A Qty (1) 4-3/8” RFJ Top Bushing


938 3 A Qty (1) 4-3/8” RFJ Top Bushing W/ 2-3/8” IF Box Conn (Asset #20335) K#: K24259

939 3 A Lrg Qty Of 4-3/8” WP Lifting

Plugs K#: K29178


(1) 4-3/8” OD Rough Crossbar Tooth Type, (1) 4-1/4” OD Rough Crossbar Tooth Type, (1) 4-1/4” OD Rough Crossbar Tooth Type, (1) 4-3/8” OD x Slick ID Packer Type, (1) 4-1/8” OD x 3-1/16” ID Packer Type, (1) 4-1/4” OD x 2-7/8” ID Packer Type K#: K24166

941 3 A Qty (1) 4” WP Top Bushing w/

2-3/8” Reg Box Conn (Asset #01408) K#: K24268

942 3 A 4-1/8" OD Washover Shoe w/ 2-

7/8” 8-Round Conn K#: K29242




Choice of 9 - Lots 943-951 943 3 A Qty (6) 3-3/4” COT Rotary

Shoes (1) 3-7/8” OD x 2-3/8” ID W/ Catcher Packer Type, (1) 3-3/4” OD x 2-13/16” ID Packer Type, (1) 3-7/8” OD x Slick ID W/ Wire Packer Type, (1) 4-1/8” OD x 3-1/16” ID Packer Type, (1) 3-3/4” OD x Slick ID Stock, & (1) 3-3/4” OD x 2-3/8” ID Packer Type K#: K24172

944 3 A Qty (5) 3-3/4” COT Rotary

Shoes (1) 3-3/4” OD Rough Crossbar Tooth Type, (1) 3-7/8” OD x 3-1/16” Rough Reverse Drag Type, (1) 3-7/8” OD Rough Crossbar Tooth Type, (1) 3-7/8” OD x 3-1/2” ID Packer Type, & (1) 3-3/4” OD x 3-1/8” ID Packer Type K#: K24174

945 3 A Qty (5) 3-3/4” COT Rotary

Shoes (1) 3-7/8” OD x 3-1/2” Packer Type, (1) 3-7/8” OD x 3-1/16” ID Packer Type, (1) 3-3/4” OD x Slick ID Packer Type, (1) 3-3/4” OD Rough Crossbar Tooth Type, (1) 3-7/8” OD x 3-1/16” ID Rough Reverse Drag K#: K24173

946 3 A Qty (5) 3-3/4” COT Rotary

Shoes (1) 4-1/8” OD x 2-7/8” ID Packer Type, (1) 4-1/8” OD x 2-7/8” ID Studded Packer Type, (1) 3-3/4” OD x 3-1/16” ID Rough Cutlip Packer Type, (1) 3-3/4” Rough Crossbar Tooth Type, & (1) 3-3/4” OD x 1-3/8” ID Packer Type K#: K24167

947 3 A Qty (5) 3-3/4” COT Rotary Shoes (2) 3-3/4” OD Tooth Type Washing Shoes, (1) 3-7/8” OD Tooth Type Washing Shoe, & (2) 3-3/4” OD Stock K#: K24170

948 3 A Qty (5) 3-3/4” COT Rotary

Shoes (1) 3-3/4” OD x Slick ID Blank Shoe, (1) 3-7/8” OD x 2-7/8” ID Packer Type, (1) 3-3/4” OD x Slick ID Packer Type, (1) 3-7/8” OD x 2-19/32” Packer Type, & (1) 3-3/4” OD x Slick ID Blank Shoe K#: K24175

949 3 A Qty (5) 3-3/4” COT Rotary

Shoes (1) 3-7/8” OD x Slick ID W/ Wire Packer Type, (1) 3-3/4” OD x Slick ID Packer Type, (1) 3-7/8” OD x Slick ID Tooth Type, (1)3-3/4” OD x 3-1/16” ID Rough Cutlip Packer Type, & (1) 3-7/8” OD x Slick ID Rough Cutlip Packer Type K#: K24171

950 3 A Qty (5) 3-3/4” COT Rotary

Shoes (1) 4-1/8” OD x 3” ID Packer Type, (1) 3-7/8” OD Rough Crossbar Tooth Type, (1) 3-3/4” OD Rough Crossbar Tooth Type, (1) 3-7/8” OD x Slick ID Rough Reverse Drag Type, & (1) 3-7/8” OD x 3-1/2” ID Rough Packer Type K#: K24169




951 3 A Qty (5) 3-3/4” COT Rotary Shoes (2) 3-3/4” OD Rough Crossbar Tooth Type, (1) 4-1/8” OD x 3-1/8” ID Rough Wavy Bottom Type, (1) 3-3/4” OD x 3-1/16” ID Packer Type, & (1) 4-1/8” OD x Slick ID Packer Type K#: K24168

952 3 A 3-3/4" OD COT x 3-1/16" ID Cut

Lip Mill Shoe 11.09' Long K#: K23844

Choice of 6 - Lots 953-958 953 3 A Qty (1) 3-3/4” COT Top

Bushing w/ 2-3/8” IF Box Conn K#: K24262

954 3 A Qty (1) 3-3/4” COT Top

Bushing w/ 2-3/8” IF Box Conn (Asset #20819) K#: K24261

955 3 A Qty (1) 3-3/4” COT Top

Bushing W/ 2-3/8” Reg Box Conn (Asset #20190) K#: K24267

956 3 A Qty (1) 3-3/4” COT Top

Bushing w/ 2-3/8” 8-Round Box Conn (Asset #71146) K#: K24265

957 3 A Qty (1) 3-3/4” COT Top Bushing w/ 2-3/8” PH-6 Box Conn (Asset #21234) K#: K24264

958 3 A Qty (1) 3-3/4” COT Top

Bushing w/ 2-3/8” PH-6 Box Conn (Asset #20493) K#: K24263

Choice of 4 - Lots 959-962 959 3 A 3-5/16" OD Washpipe

Components Top Sub w/ 2-3/8” PH-6, Extension- 3-5/16” SP, 3-5/8” Bored Shoe Stock, Rotary Shoe 3.351” OD, 2-1/8” ID, K#: K29163

960 3 A (2) Jts. 2-1/4" OD Washpipe &

Components Joints; 25'L & 20'L, (2) Alligator Spears, (2) Rotary Shoes, (2) Crossover Subs- 2-1/4” WP x 1-1/4” Reg., 2-3/8” SP WP x 2-3/8” 8-Round. Shoe Stock Bored For Carbide, (1) 3-3/8” SP WP Shoe Stock, Rotary Shoe- 2-3/4” OD x 1-5/8” ID x 2-1/4” Conn. PT Shoe w/ 2-1/4” Wash Pipe & (2) Lift Plugs. K#: K29166




961 3 A 3-1/4" WP Rotary Shoes, Crossover Subs & Extensions 3-1/4” SP Ext., (3) Rotary Shoes ((1) w/ Reverse Drag), 2-3/8” ID, (1) 3.303” OD, 3-1/4” OD. Crossover- 3-5/16” SP x 3-1/4” WP, 3-1/4” WP x 2-3/8” PPC. Wavey Bottom Shoe w/ Wire 3-1/4” WP Conn., Reverse Drag 3-1/4” WP Conn. K#: K29164A

962 3 A 2-3/8" CS Box Wash Down

Retriever K#: K27092

Choice of 9 - Lots 963-971 963 3 A QTY (6) Specialty Rotary

Shoes (1) 5-1/2” XH Conn x Alligator Spear, (1) 4-1/2” XH Conn x 6” OD x Mill Stock, (1) 2-7/8” 8-Round Conn x 6” OD x 2-7/8” PH-6 Pin Inside Cutlip Type, (1) 4-1/2” WP Conn x 4-1/2” OD Wall Hook Guide, (1) 2-3/8” PH-6 Conn x 3-7/8” OD x Slick ID Cutlip Type, & (1) 8-3/8” PFT Conn x 8-3/4” OD x Slick ID Rough Cutlip Type K#: K24276

964 3 A QTY (6) Specialty Rotary

Shoes (1) 8-3/8” PFT Conn x 8-1/4” OD x Slick ID Wavy Bottom, (1) 8-1/8” WP Conn x 8-1/2” OD x 7” ID Kripled Guide, (1) 8-1/8” WP Conn x 10-1/2” OD x 4-1/8” ID Rough Packer Type, (1) 8-3/8” PFT Conn x 8-1/2” OD x 7-1/8” ID Wavy Bottom, (1) 5-1/2” WP Conn x 6-1/2” OD x Slick ID Wavy Bottom & (1) 9-5/8” PFT Conn x 10-3/8” OD x 8-1/4” ID Rough Packer Type K#: K24272

965 3 A QTY (5) Specialty Rotary Shoes (2) 4-1/2” WP Conn x 4-1/2” OD x Slick ID Cutlip Type, (1) 4-1/2” WP Conn x 4-3/4” OD x Slick ID Cutlip Type, (1) 5-3/4” WP Conn x 5-3/4” OD x Wall Hook Guide Cutlip Type, & (1) 7-5/8” Mill Stock K#: K24279


Shoes (1) 7-5/8” WP Conn x 8-3/4” OD Spear Skirt Cutlip Type, (1) 2-7/8” PH-6 Conn x 8-1/8” OD x 2-7/8” Pin Inside Cutlip Type, (1) 4-1/2” WP Conn x 4-1/2” OD Fan Tooth Type, (2) 8-1/8” OD Mill Stock K#: K24277


Shoes (1) 8-3/8” Conn x 8-7/8” OD x Wall Hook Guide Cutlip Type, (1) 2-3/8” 8-Round Conn x 8-1/4” OD Cutlip Type, (1) 7” WP Conn x 8-5/8” OD x 2-7/8” ID Cutlip Oversized Guide, (1) 8-1/8” WP Conn x 8-1/8” OD Wall Hook Guide Cutlip Type & (1) 5-1/2” WP Conn x 7-7/8” OD Strapped W/Wire Cutlip Type K#: K24275


Shoes (1) 4-1/2” FH Conn x 8-1/8” OD x 4-1/2” FX Pin Inside, (1)2-7/8” IF Conn x 8-5/8” OD Cutlip Oversized Guide, (1) 3-1/2” 8-Round Conn x 6” OD x 3-1/2” 8-Round Box Inside, (1) 5-1/2” XL Conn x Alligator Spear, & (1) 5-1/2” XL Conn x 6-3/4” OD x Slick ID Cutlip Type K#: K24280




969 3 A QTY (4) Specialty Rotary Shoes (1) 2-3/8” 8-Round Conn x 5-1/2” 8-Round Box, (1) 5-1/2” WP Conn x 5-7/8” OD x 2-7/8” ID Cutlip Type, (1) 3-1/2” IF Conn x 5-7/8” OD x 2-7/8” 8-Round Pin Inside Cutlip Type, & (1) 3-3/4” COT Conn x Wall Hook Guide K#: K24278


Shoes (1) 8-3/8” PFT Conn x 8-7/8” OD x Slick ID Rough Tooth Type, (1) 8-3/8” PFT Conn x 8-1/2” OD x 7-1/4” ID Packer Type, (1) 9-5/8” Conn x 13” OD x 8” ID Rough Packer Type, & (1) 8-1/8” WP Conn x 8-1/18” OD x 7” ID Window Packer Type K#: K24274


Shoes (1) 5-1/2” WP Conn x 6” OD Pinged W/Wire Cutlip Type, (1) 5-1/2” WP Conn x 5-7/8” OD x 4-5/8” ID Window Packer Type, (1) 8-1/4” Conn x 8-1/4” OD x 7-1/4” ID Packer Type, (1) 8-1/4” Conn x 9-1/2” OD x 7-1/4” ID Rough Packer Type, (1) 5-1/2” XL Conn x 6” OD x 4-1/4” ID Cutlip Type, & (1) 7” BOT Conn x 7-7/8” OD x 3-1/2” ID Packer Type K#: K24273

Choice of 6 - Lots 972-977 972 3 A (5) Washpipe Extensions

4-1/2” LTC x 12’ L, 5” WP x 10’ L, 7” WP x 12’L, 3-3/4” COT x 8’L, 3-1/4” WP x 8’L K#: K30206

973 3 A (3) Washpipe Extensions 4-1/2” x 9.31’, 5” x 8.16’, 5” x 6.08’ K#: K30210

974 3 A (3) Washpipe Extensions & (1)

2-3/8" Reg Appx 10'L Stabilizer 4” WP x 9.88’ L, 4-1/2” WP x 10’ L, 3-3/4” COT x 9.75’L K#: K30207

975 3 A (4) Washpipe Extensions; (2)

9"PFT x 6'L & (2) 7-5/8"WP x 6'L & 5'2"L K#: K30213

976 3 A (3) Washpipe Extensions, (1)

Washdown, & (1) Pony Rod 4-1/2" WP x 6'L, 3-3/4" COT x 4'L, 7" WP x 4'L, 2-7/8" 8RD Perforated Washdown, 1" SR x 7-1/2'L Pony Rod K#: K30222

977 3 A 11-3/4" PFT x9-5/8" X-line & 9"

PFT x 9-5/8" WP Crossover Subs K#: K23822

Choice of 6 - Lots 978-983 978 3 A (13) 5-1/2" - 9" OD Shoe Stocks

3’ L Average K#: K30244

979 3 A (18) 5-1/2” OD Shoe Stock

(7) 8’L, (11) Approx. 5’L K#: K30247




980 3 A (14) 7-1/2"OD - 9"OD Shoe Stock Length Ranging From 16” to 50” K#: K30246

981 3 A (2) Washpipe Extensions & (1)

String Mill 9” PFT x 8'L Extension w/ 7"ID Duck Nest, 2-7/8” IF x 6-1/8" OD String Mill, & 3-3/4" COT x 8'L Extension K#: K30209

982 3 A Lg. Qty of 4-1/2"OD- 7-1/2"OD

Shoe Stock K#: K30245

983 3 A (4) 3-5/8” OD Shoe Stock & 2-

3/8" Reg Top Sub K#: K29165

Choice of 4 - Lots 984-987 984 3 A (6) Asst Wash Pipe Guides

3-3/4" BOT w/ 4-1/2” WP Top Sub, 4-1/4 "OD Basket Guide w/ 3-3/4” COT, (2) 4-1/2" WP, 5-1/2" WP K#: K29112

985 3 A (5) Wall Hook Guides

(3) 8-1/8" WP, (1) 9" PFT, (1) 7-5/8" WP K#: K30250

986 3 A (3) Washpipe Crossovers 9-3/4" Xline x 10-3/4" Xline, 7-5/8"WPX x 7-5/8" Xline, 7-5/8"WPX x 9-5/8"WP K#: K23823

987 3 A (5) Wallhook Guides

(1) 9" PFT, (2) 7-5/8" WP, (1) 7-1/2" WP, (1) 5-1/2" WP K#: K30214

MISC FISHING TOOLS & RACKS

Choice of 3 - Lots 988-990 988 3 A Logan Stiff Arm for 2.5 Swivel-

Standard (UNUSED) K#: K23836

989 3 A Logan Stiff Arm f/ 2.5 Power

Swivel (Unused) K#: K23837

990 3 A Stiff Arm for 2.5 Swivel- Shorty

K#: K23838

991 3 A Swivel Stand for 2.5 Power

Swivel K#: K27077

992 3 A 3.5 Power Swivel Parts

K#: K015414




993 3 A Misc Parts for 2.5 Power Swivel Washpipe Packing, Set Screws & o-Rings, Unused Pressure Gauges, Torque Gauges, Stiff Arm Pins, Hyd Fittings K#: K015413

994 3 A (1) Power Swivel Hyd. Motor &

(1) Electric Starter K#: K29171

995 3 A Oil, Fuel, Air Filters for 2.5 &

3.5 Power Swivels K#: K015410

996 3 A Qty (1) 3-1/2” 6-Thread Top

Bushing w/ 2-3/8" 8RD Conn K#: K24266

997 3 A 3-1/2” OD Slated (Back Off)

Collar w/ 2-3/8” IF Conn. K#: K30236

998 3 A 2-7/8" 8RD Landing Nipple

K#: K30913

999 3 A (321”) (10 JTS) of 2-7/8” Un-

milled Raw Materials (UNUSED) K#: K27603

1000 3 A (4) JTS. 1-1/4" CS Tubing W/ (2) Mule Shoes K#: K27088

1001 3 A (14) JTS. 1"CS Tubing W/ (1)

Mule Shoe K#: K27087

Choice of 8 - Lots 1002-1009 1002 3 A (11) N80 & (4) P110 Tubing Pup

w/ 2-7/8” 8-Round Conn. N80 Approx. Lengths (In Feet)-11.72, 6, 11.7, 5.82, 3.8(3 ½” 8-Round Conn.), 7.9, 9.49, 6, 4’2”, 2. P110 Approx. Lengths (In Feet)-9.69,7.89, 10.1, 10.09. K#: K30187

1003 3 A (6) N80 & (6) P110 Tubing Pup

Joints w/ 2-7/8” PH6 Conn. N80 Approx. Lengths (In Feet)- 5.91, 7.61, 7.1, 4.03, 9.98, 3.39. 2. P110 Approx. Lengths (In Feet)-2.3, 3.17, 2.6, 9.63, 7.54, 5.63 K#: K30188

1004 3 A (6) 2-3/8” PH-6 5.95# P110

Tubing Pup Joint Approx. Lengths: 9.67’, 7.44’, 7.32’, 5.82’,3.76’, 1.91’ K#: K30183




1005 3 A (6) 2-3/8” Ph-6, 5.95# P110 Tubing Pup Joint Set Approx. Lengths: 9.24’, 7.58’, 5.65’, 3.77’, 3.34’, 1.74’ K#: K30181

1006 3 A (7) 2-3/8” PH-6, P-110 5.95#

Tubing Pup Joints Approx. Lengths: 7.65’, 7.70’, 3.84’, 5.56’, 5.38’, 5.11’,1.78’, K#: K30182

1007 3 A (6) 2-3/8” PH-6 5.95# P110

Tubing Pup Joints 7.57’, 5.74’, 5.73’, 3.94’, 3.41’, 2.01’ K#: K30184

1008 3 A (6) N80 & (5) P110 Tubing Pup

Joints w/ 2-3/8” 8-Round Conn. N80 Approx. Lengths (In Feet); 7.69, 6’3”, 6, 8, (2) 3.91. P110 Approx. Lengths (In Feet);7.95, 9.61, 7.9, 9.73, 9.7 K#: K30186

1009 3 A (6) 2-3/8” CS P110 4.7# Tubing

Pup Joint 9.65’, 7,83’, 5.87’, 2.8’, 3.66’, 3.79’ K#: K30185

1010 3 A QTY (14) Misc Mule Shoes

K#: K24343

1011 3 A 2-3/8" CS Box 27' Long Shoe K#: K27090

1012 3 A 5-1/2" 8 Rd. LTC Pup Joint 7.9'

Long K#: K23842

1013 3 A 4-1/2" LTC Pup Joint 12.4'

Long K#: K23841

1014 3 A 2-3/8" 8 Rd. 18'L Extension

K#: K27091

1015 3 A (2) 3/4" WT. Bars, (1) 3/4" Rod

Jar, (4) Tubing Clamps Tubing Clamps (1) 1"CS, (2) 1-1/2" CS, (1) 2-1/16"CS, K#: K23824

1016 3 A Complete Wireline Stripping

Kit w/ (2) T-Bars, 4-1/2"XH Sub, Brass, Spare Latch Bolts K#: K26037

1017 3 A QTY (2) 2-9/16” 5M Bowen

B.O.P.s W/Extra Rams K#: K26079




1018 3 A (5) Rope Spears 7” Casing w/ 3-1/2 IF Conn, 5-1/2” Casing w/ 2-3/8” IF Conn, 4-1/2” Casing 2-3/8 8rd Conn, 3-1/2” w/ 2-3/8” IF Conn, 3-1/4” w/ 2-3/8” 8rd Conn K#: K26029

1019 11 O QTY (10) Assorted Sized Wire

Line Mills Sizes from 1-1/2”, 1-7/8” & 2-1/2” K#: K22365*

1020 11 O QTY (7) Assorted Wire Line

Tools K#: K22366*

1021 3 A Qty (13) Pony Rods 3/4"SR -

1"SR K#: K23825

1022 3 A Qty (2) 2-3/8” IF Shop Built

Long Rope Spears (1) 32.20’ L & (1) 21.69’ L K#: K27604

1023 3 A (1) Joint 3/4" Sucker Rod

(UNUSED) K#: K27089

1024 3 A 1-7/8”OD Mouse Trap & (4) Wireline Spears Mouse Trap w/ 5/8” SR Conn, (3) 3/4” SR Sgl Spears & (1) 5/8” SR Double Spear K#: K32259

1025 3 A Asst. Rod Collars and

Changeovers & (2) Chase Tools K#: K30136

Choice of 4 - Lots 1026-1029 1026 3 A Asst. Fishing Tools

4-1/2" WP Wall Hook Guide, 2-3/8" PH-6 Pup Joint & Mule Shoe, 2-7/8" 8RD Stabilizer Shoe, (2) 2-7/8" 8RD Pup Joints, 1-1/2" CS Mule Shoe, 2-3/8" 8RD Washing Shoe, 2-3/8" IF Stabilizer, 2-3/8" IF String Mill, & 3-1/2" IF x Blank (UNCUT) K#: K30232

1027 3 A Asst. Fishing Tools

(2) Alligator Spears, (2) 8-1/8” WP Ext. (1) 9” PFT Extension (3) 5-1/2” WP Extensions (2) Spear Extensions, 1-13/16” WFJ x 5.5’L, (2) 4.5” WP Ext. (1) 3-3/4” COT Pinged Ext. K#: K30235

1028 3 A Asst. Fishing Tools

2-7/8" IF String Mill, 2-3/8" Reg Junk Catcher, (2) 2-3/8" Reg Junk Baskets, 7" WP Mule Shoe, 2-3/8" PH-6 & 2-3/8" IF Pup Joints, 7"WP Mule Shoe, 3-1/2" WP Uncut Shoe K#: K30233




1029 3 A Pallet of Misc Fishing & Rental Tool Parts Top Subs, Change Overs, Collars, Stock & Misc K#: K24341

Choice of 18 - Lots 1030-1047 1030 3 A 6-Tier Steel Tool Rack

8’H x 10’L x 6' Deep K#: K30208

1031 3 A 16'H x 20.5'W 5-Tier Steel Tool

Rack (PIPE RACK IS CEMENTED INTO GROUND. BUYER RESPONSIBLE FOR REMOVAL Can Cut or Dig). CONTENTS ON RACK NOT INCLUDED K#: K29230

1032 3 A 14'H x 20.5'W 4-Tier Steel Tool

Rack (PIPE RACK IS CEMENTED INTO GROUND. BUYER RESPONSIBLE FOR REMOVAL, CAN CUT OR DIG)CONTENTS ON RACK NOT INCLUDED K#: K29232

1033 3 A 14'H x 14'W 4-Tier Tool Rack

Was Cemented in Ground K#: K29210

1034 3 A 14'H x 17'W 4-Tier Steel Tool Rack Buyer Responsible For Removal, Can dig or Cut Out K#: K29229

1035 3 A 14'H x 20.5' W 4-Tier Steel Tool

Rack (PIPE RACK IS CEMENTED INTO GROUND. BUYER RESPONSIBLE FOR REMOVAL, CAN CUT OR DIG)CONTENTS ON RACK NOT INCLUDED K#: K29231

1036 3 A 7 Tier Pipe Rack (Needs

Repair) Shipping Dimensions 28'L x 8'6"H K#: K23827

1037 3 A 72"H x 63"W 19-1/4" Deep

Steel Stud Rack CONTENTS NOT INCLUDED K#: K30135

1038 3 A (3) 5-Tier Steel Tool Racks

5’H x 5’ W x 2’ Deep K#: K30205

1039 3 A (2) 6'H x 3' W 5-Tier Shelving

Units K#: K29197




1040 3 A 10'H x 20'L 6 Tier Pipe Rack Made from 5-1/2"OD Pipe BUYER RESPONSIBLE FOR REMOVAL, CEMENTED IN GROUND K#: K23839

1041 3 A 5'H x 4-1/2'W x 2' Deep 5-Tier

Steel Tool Rack K#: K30227

1042 3 A Qty (2) Steel Tool Racks

(1) 4’ W x 6’ L x 6’ H, 6-Tier Double Sided & (1) A-Frame Type Stand K#: K27616

1043 3 A (3) Tool Racks

(1) 10'L DSA Rack, (1) 5'H 5-Tier Tool Rack, (1) 4'H x 12'L 4-Tier Steel Tool Rack (CONTENTS NOT INCLUDED) K#: K30219

1044 3 A 4'H x 5'W x 19'L Table Rack

K#: K29213

1045 3 A 5'H x 4-1/2'L x 4'W 6-Tier Steel

Tool Rack (CONTENTS NOT INCLUDED) K#: K30234

1046 3 A 3'H x 4'W x 14'L Tool Stand

K#: K27073

1047 3 A (6) 2’H x 4’W x 2’L Stackable Steel Rack Sections K#: K015443

Choice of 4 - Lots 1048-1051 1048 3 A (7) Stabbing Guides

2-7/8” 7.9Lb, (3) 2-3/8” 5.95Lb, 1-1/4” CS, 2-7/8” 8.7lb, 2-1/16” K#: K29172

1049 3 A (6) Stabbing Guides

2-3/8” 4.7lb, (3) 2-3/8” 5.95, 2-3/8” 4.7lb, 2-7/8” 7.9lb K#: K29175


4” UF, (2) 2-3/8” 4.7lb, 2-3/8” 5.95lb, 2-7/8” 7.9lb, 2-3/8” 5.95 K#: K29174


2-3/8” 4.7lb, 2-3/8” 5.95lb, 2-7/8” 6.5lb, 2-3/8” 5.95lb, 2-7/8” 7.9lb, 2-3/8” 5.95lb. K#: K29173

1052 3 A Large QTY Casing & Tubing

Drifts 5-1/2”- 1-1/4” K#: K26084




Choice of 10 - Lots 1053-1062 1053 3 A 2-1/4”-5” WP Thread

Protectors & Lifting Plugs Some with Lifting Plugs K#: K29182

1054 3 A Lrg Qty Of 8-1/8” WP Thread

Protectors Some w/ Lifting Plugs K#: K29184

1055 3 A Lrg Qty Of 4-1/2” WP Thread

Protectors K#: K29187

1056 3 A 6"-9" OD WP Thread

Protectors & Lifting Plugs K#: K29185

1057 3 A Lift Bales & Metal Thread

Protectors Lift Bales - (1) 5-1/2" FH, (1) 4-1/2" Reg, (1) 3-1/2" Reg, Metal Protectors -(5) 2-7/8" IF Pin, (1) 2-7/8" 8rd Box, (2) 2-7/8" 8rd Pin K#: K015428

1058 3 A 4”-4-3/8” WP Thread

Protectors & Lifting Plugs K#: K29179

1059 3 A Lrg Qty Of 4-1/2” WP Thread Protectors w/ (1) 4 ¾” Thread Protector K#: K29188

1060 3 A Lrg WP Thread

Protectors/Lifting Plug (2) 9” PFT Lifting Plugs, (1) 9” PFT Thread Protectors, (1) 8-1/2” Thread Protectors K#: K29183

1061 3 A Lrg Qty OF 5-1/2” Lifting Plugs

& Thread Protectors K#: K29180

1062 3 A Lrg Qty OF 3-3/4” WP Lifting

Plugs & Thread Protectors K#: K29181

END OF DAY 1

SALE WILL CONTINUE SEPTEMBER 17 AT 9:00 AM BEGINNING WITH LOT 1,100




DAY 2

CONSTRUCTION 1100 7 F 2014 Doosan P425 HP375

Portable Air Compressor Doosan Air Compressor P/B 375 HP Cumming Diesel Engine, W/ Electric Start, Radiator, Gauges, Exhaust Muffler, Insulated Enclosure, All MTD on S/A Bumper Pull Trailer, W/ 2-5/16” Hitch, Landing Gear, Spring Suspension, 225/75 R15 Tires, Steel Wheels, (Asset# AC24) Hours Unverifiable, (TX-M01-3528) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 458124UTXF15 K#: K24921

Choice of 4 - Lots 1101-1104 1101 6 F 2012 Cummins 200kW Gen Set

(INOP) M/N C200D6R-A040A032, S/N G120359961, 1 Phase/134kW/134kVA, 3 Phase/200kW/250kVA, p/b Cummins 6 Cylinder Turbo Diesel Engine, Metered Hours 3,401, Control Panel w/Gauge Cluster & Outlets, Mtd Fuel Tank, All Mtd On T/A Trailer Chassis, Manual Jack, Safety Chains, 7.50R16LT Tires w/Steel Wheels, OAL 19’, Seller Asset GN1337, VIN 5632G1929CM000371. MISSING FRONT PASSENGER RIM & TIRE, ENGINE IS PARTIALLY DISASSEMBLED. VIN/SN: 5632G1929CM000371 Meter Reads: 3401 K#: K28023

1102 6 F 2012 Cummins 150kW Gen Set (INOP) M/N CD150D6R-A040A031, S/N C120320381, 1 Phase/100kW/100kVA, 3 Phase/150kW/187.5kVA, p/b Cummins 6 Cylinder Turbo Diesel Engine, Metered Hours 1,103, Control Panel w/Gauge Cluster & Outlets, Mtd Fuel Tank, All Mtd On T/A Trailer Chassis, Manual Jack, Safety Chains, ST235/80R16 Tires w/Steel Wheels, OAL 19’, Seller Asset GN1187, VIN 1M9DA19BXCM646312. MISSING FRONT DRIVER SIDE RIM & TIRE. VIN/SN: 1M9DA19BXCM646312 Meter Reads: 1103 K#: K28024

1103 6 F 2012 Power Pro 150kVA Gen

Set (INOP) Hokuetsu Industries, M/N SDG150S, S/N 1728B10292, 3 Phase, 150kVA, 240/480V, p/b Isuzu 6 Cylinder Diesel Engine, M/N BH-6HK1XYGD-07, Metered Hours 1,170, Control Panel w/Gauge Cluster & Outlets, Mtd Fuel Tank, All Mtd On T/A Trailer Chassis, Manual Jack, Safety Chains, Emergency Breakaway Cable, ST225/75R15 Tires w/Steel Wheels, OAL 17’, Seller Asset GN1307, VIN 5UABU1619CV001313. VIN/SN: 5UABU1619CV001313 Meter Reads: 1170 K#: K28069




1104 6 F 2011 Multiquip 120kW Gen Set (INOP) M/N DCA-150SSIU, S/N 7910223, AC Generator, M/N DB-1651I, S/N 728032, 1 Phase/87kW/87kVA, 3 Phase/120kW/150kVA, p/b Isuzu 6 Cylinder Diesel Engine, M/N 6HK1X, Metered Hours 8,305, Control Panel w/Gauge Cluster, Outlets, Mtd Fuel Tank, All Mtd On T/A Trailer Chassis, Manual Jack, Safety Chains, Emergency Breakaway Cable, ST235/85R16 Tires w/Steel Wheels, OAL 17’, Seller Asset GN0871, VIN 5SLBG1627BL007641. MISSING HITCH, COOLANT SYSTEM IS DISASSEMBLED. VIN/SN: 5SLBG1627BL007641 Meter Reads: 8305 K#: K28027

Choice of 4 - Lots 1105-1108 1105 6 F 2012 Multiquip 56kW Gen Set

(INOP) M/N DCA-70SSIU2, S/N 7352399, AC Generator, M/N DH0750I, S/N 738238, 1 Phase/40kW/40kVA, 3 Phase/56kW/70kVA, p/b Isuzu 4 Cylinder Diesel Engine, M/N 4JJ1X, Metered Hours 39,364, Control Panel w/Gauge Cluster, Outlets, Mtd Fuel Tank, All Mtd On T/A Trailer Chassis, Manual Jack, Safety Chains, Emergency Breakaway Cable, ST225/75D15 Tires w/Steel Wheels, OAL 16’, Seller Asset GN1203, VIN 5SLBG1624CL009686. MISSING FRONT DRIVER RIM & TIRE, FRONT OF ENGINE IS PARTIALLY DISASSEMBLED. VIN/SN: 5SLBG1624CL009686 Meter Reads: 39364 K#: K28029

1106 6 F 2011 Multiquip 56kW Gen Set (INOP) M/N DCA-70SSIU2, S/N 7352063, AC Generator, M/N DH0750I, S/N 732256, 1 Phase/40kW/40kVA, 3 Phase/56kW/70kVA, p/b Isuzu 4 Cylinder Diesel Engine, M/N 4JJ1X, Metered Hours 21,256, Control Panel w/Gauge Cluster, Outlets, Mtd Fuel Tank, All Mtd On T/A Trailer Chassis, Manual Jack, Safety Chains, Emergency Breakaway Cable, ST225/75R15 Tires w/Steel Wheels, OAL 16’, Seller Asset GN1010, VIN 5SLBG1623BL008964. MISSING FRONT DRIVER & PASSENGER RIMS & TIRES. VIN/SN: 5SLBG1623BL008964 Meter Reads: 21256 K#: K28025

1107 6 F 2008 Multiquip 56kW Gen Set

(INOP) M/N DCA-70SSIU2, S/N 7350866, AC Generator, M/N DB-0831I2, S/N 692335, 1 Phase/40kW/40kVA, 3 Phase/56kW/70kVA, p/b Isuzu 4 Cylinder Diesel Engine, M/N FF-4BG1T, Metered Hours 21,513, Control Panel w/Gauge Cluster, Outlets, Mtd Fuel Tank, All Mtd On T/A Trailer Chassis, Manual Jack, Safety Chains, ST225/75R15 Tires w/Steel Wheels, OAL 15’, Seller Asset GN0523, VIN 5SLBG16288L003610. MISSING HITCH ASSEMBLY. **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5SLBG16288L003610 Meter Reads: 21513 K#: K28026




1108 6 F 2008 Multiquip 36kW Gen Set (INOP) M/N DCA-45SSIU3, S/N 7204466, AC Generator, M/N DB0501I2, S/N 685275, 1 Phase/26kW/26kVA, 3 Phase/36kW/45kVA, p/b Isuzu 4 Cylinder Diesel Engine, M/N BB-4JG1T, Metered Hours 1,295, Control Panel w/Gauge Cluster, Outlets, Mtd Fuel Tank, All Mtd On T/A Trailer Chassis, Manual Jack, Safety Chains, Emergency Breakaway Cable, ST225/75R15 Tires w/Steel Wheels, OAL 15’6”, Seller Asset GN0007, VIN ILLEGIBLE. VIN/SN: 7204466 Meter Reads: 1295 K#: K28028

Choice of 2 - Lots 1109-1110 1109 7 F 2014 Power Pro 150 SDG1505-

8B1 Trailer MTD Generator S/N: 1728B10792, 150-KVA Generator, P/B Isuzu 6-Cylinder Diesel Engine, W/ Electric Start, Radiator, Gauges, Exhaust Muffler, Fuel Tank, Insulated Enclosure, All MTD on 2014 Fabrique T/A Bumper Pull Trailer, 2-5/16” Hitch, Landing Gear, W/ Spring Suspension, 235/80 R16 Tires, Steel Wheels, 9,178 Metered Hours, TX-629-550H (Asset# GN2211) (NOTE: (2) Low Tires) VIN/SN: 5UABU1619EV002612 Meter Reads: 9178 K#: K24916

1110 7 F 2012 Power Pro 150 SDG150S Trailer MTD Generator S/N: 1728B10304, 150-KVA Generator, P/B Isuzu 6-Cylinder Diesel Engine, W/ Electric Start, Radiator, Gauges, Exhaust Muffler, Fuel Tank, Insulated Enclosure, All MTD on 2012 Fabrique T/A Bumper Pull Trailer, 2-5/16” Hitch, Landing Gear, W/ Spring Suspension, 235/80 R16 Tires, Steel Wheels, 6,553 Metered Hours, TX-540-76P (Asset# GN1388) (NOTE: (1) Low Tire) VIN/SN: 5UABU1616CV001415 Meter Reads: 6553 K#: K24917

Choice of 14 - Lots 1111-1124 1111 7 F 2012 MQ Power Whisperwatt

DCA-70SS1U2 Trailer MTD Generator S/N: 7353009, Whisperwatt 40-KW Generator, P/B Isuzu 4JJ1X 4-Cylinder Diesel Engine, W/ Electric Start, Radiator, Gauges, Exhaust Muffler, Fuel Tank, Insulated Enclosure, All MTD on 2013 Fabrique T/A Bumper Pull Trailer, 2-5/16” Hitch, Landing Gear, W/ Spring Suspension, 225/75 R15 Tires, Steel Wheels, 20,187 Metered Hours, TX-131-504H, (Asset# GN1751) VIN/SN: 5SLBG1625CL012063 Meter Reads: 20187 K#: K24910




1112 7 F 2012 MQ Power Whisperwatt DCA-70SS1U2 Trailer MTD Generator S/N: 7352632, Whisperwatt 40-KW Generator, P/B Isuzu 4JJ1X 4-Cylinder Diesel Engine, W/ Electric Start, Radiator, Gauges, Exhaust Muffler, Fuel Tank, Insulated Enclosure, All MTD on 2012 Fabrique T/A Bumper Pull Trailer, 2-5/16” Hitch, Landing Gear, W/ Spring Suspension, 225/75 R15 Tires, Steel Wheels, 29,015 Metered Hours, TX-061-614H (Asset# GN1373) VIN/SN: 5SLBG1628CL010596 Meter Reads: 29015 K#: K24911

1113 7 F 2011 MQ Power Whisperwatt

DCA-70SS1U2 Trailer MTD Generator S/N: 7351704, Whisperwatt DB-050112 40-KW Generator, P/B Isuzu BB-4JJ1X 4-Cylinder Diesel Engine, W/ Electric Start, Radiator, Gauges, Exhaust Muffler, Fuel Tank, Insulated Enclosure, All MTD on 2011 Fabrique T/A Bumper Pull Trailer, 2-5/16” Hitch, Landing Gear, W/ Spring Suspension, 225/75 R15 Tires, Steel Wheels, 17,516 Metered Hours, TX-221-35L, (Asset# GN885) (NOTE: (3) Low Tires) VIN/SN: 5SLBG1622BL008308 K#: K24905

1114 7 F 2012 MQ Power Whisperwatt DCA-704512 Trailer MTD Generator S/N: 8802451, Whisperwatt 40-KW Generator, P/B Isuzu 4JJ1X 4-Cylinder Diesel Engine, W/ Electric Start, Radiator, Gauges, Exhaust Muffler, Fuel Tank, Insulated Enclosure, All MTD on 2013 Fabrique T/A Bumper Pull Trailer, 2-5/16” Hitch, Landing Gear, W/ Spring Suspension, 205/75 R15 Tires, Steel Wheels, 550 Metered Hours, TX-541-30P, (Asset# GN1563) (NOTE: Radiator is uninstalled) VIN/SN: 5SLBG1422CL011536 Meter Reads: 550 K#: K24909


DCA-125SS1U Trailer MTD Generator S/N: 7510469, Whisperwatt 72-KW Generator, P/B Isuzu 4HK1X 4-Cylinder Diesel Engine, W/ Electric Start, Radiator, Gauges, Exhaust Muffler, Fuel Tank, Insulated Enclosure, All MTD on 2012 Fabrique T/A Bumper Pull Trailer, 2-5/16” Hitch, Landing Gear, W/ Spring Suspension, 225/75 R15 Tires, Steel Wheels, 14,244 Metered Hours, TX-161-78M (Asset# GN1079) (NOTE: (4) Low Tires) (NOTE: Engine Disassembled) VIN/SN: 5SLBG1626CL009382 Meter Reads: 14244 K#: K24920




1116 7 F 2011 MQ Power Whisperwatt DCA-70SS1U2 Trailer MTD Generator S/N: 7351598, Whisperwatt 40-KW Generator, P/B Isuzu 4JJ1X 4-Cylinder Diesel Engine, W/ Electric Start, Radiator, Gauges, Exhaust Muffler, Fuel Tank, Insulated Enclosure, All MTD on 2011 Fabrique T/A Bumper Pull Trailer, 2-5/16” Hitch, Landing Gear, W/ Spring Suspension, 225/75 R15 Tires, Steel Wheels, 10,957 Metered Hours, TX-827-18J (Asset# GN756) (NOTE: Missing (1) Wheel & Tire) VIN/SN: 5SLBG1622BL006381 Meter Reads: 10957 K#: K24913


DCA-70SS142 Trailer MTD Generator S/N: 7352652, Whisperwatt 40-KW Generator, P/B Isuzu 4JJ1X 4-Cylinder Diesel Engine, W/ Electric Start, Radiator, Gauges, Exhaust Muffler, Fuel Tank, Insulated Enclosure, All MTD on 2012 Fabrique T/A Bumper Pull Trailer, 2-5/16” Hitch, Landing Gear, W/ Spring Suspension, 225/75 R15 Tires, Steel Wheels, 30,678 Metered Hours, TX-540-51P, (Asset# GN1383) VIN/SN: 5SLBG1625CL010829 Meter Reads: 30678 K#: K24907

1118 7 F 2007 MQ Power Whisperwatt DCA-70SS1 Trailer MTD Generator S/N: 3794617, Whisperwatt 40-KW Generator, P/B Isuzu FF-4BG1T 87HP 4-Cylinder Diesel Engine, W/ Electric Start, Radiator, Gauges, Exhaust Muffler, Fuel Tank, Insulated Enclosure, All MTD on 2007 Fabrique T/A Bumper Pull Trailer, 2-5/16” Hitch, Landing Gear, W/ Spring Suspension, 225/75 R15 Tires, Steel Wheels, 16,605 Metered Hours, TX-M02-1537 (Asset# GN411) (NOTE: 2 Low Tires) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5SLBG16267L002440/3794617 Meter Reads: 16605 K#: K24912


DCA-07501 Trailer MTD Generator MQ Power Whisperwatt DCA-07501 Trailer MTD Generator S/N: 7351561, Whisperwatt 40-KW Generator, P/B Isuzu 4JJ1X 4-Cylinder Diesel Engine, W/ Electric Start, Radiator, Gauges, Exhaust Muffler, Fuel Tank, Insulated Enclosure, All MTD on 2011 Fabrique T/A Bumper Pull Trailer, 2-5/16” Hitch, Landing Gear, W/ Spring Suspension, 225/75 R15 Tires, Steel Wheels, 27,372 Metered Hours, TX-827-16J (Asset# GN755) (NOTE: (2) Flat Tires) (NOTE: Missing Generator) VIN/SN: 5SLBG1625BL006391 Meter Reads: 27372 K#: K24914




1120 7 F 2011 MQ Power Whisperwatt DCA-70SS142 Trailer MTD Generator S/N: 7351860, Whisperwatt 40-KW Generator, P/B Isuzu 4JJ1X 4-Cylinder Diesel Engine, W/ Electric Start, Radiator, Gauges, Exhaust Muffler, Fuel Tank, Insulated Enclosure, All MTD on 2011 Fabrique T/A Bumper Pull Trailer, 2-5/16” Hitch, Landing Gear, W/ Spring Suspension, 225/75 R15 Tires, Steel Wheels, 37,290 Metered Hours, TX-222-06L, (Asset# GN927) VIN/SN: 5SLBG1629BL008421 Meter Reads: 37290 K#: K24908


DCA-150SS1U Trailer MTD Generator S/N: 7910042, Whisperwatt 87-KW Generator, P/B Isuzu 6HK1X 4-Cylinder Diesel Engine, W/ Electric Start, Radiator, Gauges, Exhaust Muffler, Fuel Tank, Insulated Enclosure, All MTD on 2010 Fabrique T/A Bumper Pull Trailer, 2-5/16” Hitch, Landing Gear, W/ Spring Suspension, 235/80 R16 Tires, Steel Wheels, 16,911 Metered Hours, TX-557-04F (Asset# GN76) (NOTE: (3) Low Tires) (NOTE: Engine Disassembled) VIN/SN: 5SLBG1625AL005126 Meter Reads: 16911 K#: K24919

1122 7 F 2008 MQ Power Whisperwatt DCA-300SSK4 Trailer MTD Generator MQ Power Whisperwatt DCA-300SSK4 Trailer MTD Generator S/N: 3825546, 300-KVA Generator, P/B Komatsu SAA6D125E-5 6-Cylinder Diesel Engine, W/ Electric Start, Radiator, Gauges, Exhaust Muffler, Fuel Tank, Insulated Enclosure, All MTD on 2008 Fabrique T/A Gooseneck Trailer, No Hitch, Dual Landing Gear, W/ Spring Suspension, 235/80 R17.5 Tires, Steel Wheels, 42,261 Metered Hours, TX-M04-2223 (Asset# GN547) (NOTE: Missing Hitch) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 3825546 Meter Reads: 42261 K#: K24922


DCA-70SS1U Trailer MTD Generator S/N: 7350683, Whisperwatt 40-KW Generator, P/B Isuzu FF-4BG1T 87HP 4-Cylinder Diesel Engine, W/ Electric Start, Radiator, Gauges, Exhaust Muffler, Fuel Tank, Insulated Enclosure, All MTD on 2007 Fabrique T/A Bumper Pull Trailer, NO Hitch, Landing Gear, W/ Spring Suspension, 225/75 R15 Tires, Steel Wheels, 28,703 Metered Hours, TX-M04-4281 (Asset# GN445) (NOTE: (1) Tire Has Tread Coming Loose) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5SLBG16267L002532 K#: K24915




1124 7 F 2005 MQ Power Whisperwatt DCA-04801 Trailer MTD Generator S/N: 72054271, Whisperwatt 26-KW Generator, P/B Isuzu 4JJ1T 4-Cylinder Diesel Engine, W/ Electric Start, Radiator, Gauges, Exhaust Muffler, Fuel Tank, Insulated Enclosure, All MTD on 2011 Fabrique T/A Bumper Pull Trailer, 2-5/16” Hitch, Landing Gear, W/ Spring Suspension, 225/75 R15 Tires, Steel Wheels, 34,850 Metered Hours, TX-020-28M, (Asset# GN916) VIN/SN: 1E9GF1529CR153828 Meter Reads: 34850 K#: K24906

Choice of 4 - Lots 1125-1128 1125 7 F 2008 MQ Power Whisperwatt

DCA-45SS163 Trailer MTD Generator S/N: 7204441, Whisperwatt DB-050112 26-KW Generator, P/B Isuzu BB-4JG1T 55.3 HP 4-Cylinder Diesel Engine, W/ Electric Start, Radiator, Gauges, Exhaust Muffler, Fuel Tank, Insulated Enclosure, All MTD on 2003 Fabrique T/A Bumper Pull Trailer, 2-5/16” Hitch, Landing Gear, W/ Spring Suspension, 225/75 R15 Tires, Steel Wheels, 27,294 Metered Hours, TX-M03-5703, (Asset# GN72) (NOTE: Missing (2) Wheels & Tires) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 1E9GF8921AR153774/720441 Meter Reads: 27294 K#: K24904

1126 7 F 2006 MQ Power Whisperwatt DCA-45SS143 Trailer MTD Generator S/N: 7203741, Whisperwatt DB-050112 26-KW Generator, P/B Isuzu BB-4JG1T 55.3 HP 4-Cylinder Diesel Engine, W/ Electric Start, Radiator, Gauges, Exhaust Muffler, Fuel Tank, Insulated Enclosure, All MTD on 2006 Fabrique T/A Bumper Pull Trailer, 2-5/16” Hitch, Landing Gear, W/ Spring Suspension, 225/75 R15 Tires, Steel Wheels, 22,052 Metered Hours, TX-M00-6714, (Asset# GN296) (NOTE: (1) Flat Tire) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 7203741 Meter Reads: 22052 K#: K24903


DCA-25514 Trailer MTD Generator S/N: 7105475, Whisperwatt 14.4-KW Generator, P/B Isuzu QD-60 (C-240) 30.6 HP 4-Cylinder Diesel Engine, W/ Electric Start, Radiator, Gauges, Exhaust Muffler, Fuel Tank, Insulated Enclosure, All MTD on 2001 Fabrique T/A Bumper Pull Trailer, 2-5/16” Hitch, Landing Gear, W/ Spring Suspension, 205/75 R15 Tires, Steel Wheels, 74 Metered Hours, TX-M04-4429, (Asset# GN593) (NOTE: Missing (1) Hub & (1) Wheel and Tire) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 7105475 Meter Reads: 74 K#: K24901




1128 7 F 2013 MQ Power Whisperwatt DCA-25514 Trailer MTD Generator S/N: 8104733, Whisperwatt 14.4-KW Generator, P/B Isuzu 4LE2 4-Cylinder Diesel Engine, W/ Electric Start, Radiator, Gauges, Exhaust Muffler, Fuel Tank, Insulated Enclosure, All MTD on 2013 Fabrique T/A Bumper Pull Trailer, 2-5/16” Hitch, Landing Gear, W/ Spring Suspension, 225/75 R15 Tires, Steel Wheels, 25,129 Metered Hours, TX-828-871J, (Asset# GN1816) VIN/SN: 5SLBG1621DL012613 Meter Reads: 25129 K#: K24902

1129 1 I CAT 12,000LB Capacity Forklift

(INOP-BOS) p/b 6 Cyl. Diesel Engine, Cab Cover, Solid Tires, Forks 6"W x 71-1/2"L 2-1/2"H, Meter Reads 13,242 Hrs, 77"W x 17'L x74"H Overall Dimensions, Weight 16,000 lbs Approx. Meter Reads: 13242 K#: K28996

1130 2 V Caterpillar V40B 4000#

Pneumatic Tire Forklift p/b 4 Cyl LPG Eng, w/ 42" Forks, 156" 2-Stage Mast, Canopy, 7.00-12 F, 6.50-10 R, THIS ENGINE COULD NOT BE STARTED. THE MAIN COMPONENTS COULD NOT BE OPERATIONALLY CHECKED. VIN/SN: 33N975 Meter Reads: 9962 K#: K018410

Choice of 2 - Lots 1131-1132 1131 2 AD 2012 Case 570NXT Landscape

Loader w/ 4 Spd A/T, 84" GP Bucket, 85" Hyd Box Scraper, Scarifier, Canopy, 12x16.5 F, 19.5-24 R, NO KEY VIN/SN: JJGN570NCCC570642 K#: K018468

1132 2 M Case 570MXT Landscape

Loader w/ 4 Spd A/T, 82" GP Bucket, 85" Box Scraper, Canopy, 12x16.5 F, 19.5-24 R, NO KEY OR REAR HYD LIFT CYLINDERS. THIS ENGINE COULD NOT BE STARTED. THE MAIN COMPONENTS COULD NOT BE OPERATIONALLY CHECKED. VIN/SN: JJG0301789 K#: K018469

Choice of 2 - Lots 1133-1134 1133 16 U Gomaco GT 6000 90 Curb &

Gutter Machine p/b Detroit Diesel Engine, Open Air Operator Station, Control Panel, Hopper, Curb/Gutter Mold, Mtd HPU, Variable Height Frame, 10”W Steel Track Drive, Overall Dimensions 10’L x 12’W x 10’H. (BUYER RESPONSIBLE FOR LOADOUT.) VIN/SN: MC10175-04 K#: K30387




1134 16 U Gomaco GT 6000 90 Curb & Gutter Machine p/b Detroit Diesel Engine, Open Air Operator Station, Control Panel, Pressure Bottle w/Hose, Mtd HPU, Variable Height Frame, 10”W Steel Track Drive, Overall Dimensions 10’L x 10’W x 10’H. (BUYER RESPONSIBLE FOR LOADOUT.) K#: K30388

PICKUPS 1135 2 Y 2017 Ford F350 XL INOP Crew

Cab Pickup p/b 6.7L V8 Diesel Eng , DEF, A/T, w/ 8' Bed, Spring Susp, 275/70R18, KEYS LOCATED IN THE OFFICE VIN/SN: 1FT8W3BT1HED60063 K#: K018412

Choice of 2 - Lots 1136-1137 1136 2 Y 2019 Ford F250 XL 4x4 INOP

Crew Cab Pickup p/b 6.7L V8 Diesel Eng, DEF, A/T w/ 6'8" Bed, Weather Guard Tool box, Job Site Box, Spring Susp, 245/75R17, NO KEY VIN/SN: 1FT7W2BT5KEC90824 K#: K018419

1137 2 Y 2017 Ford F250 XLT 4x4 Crew

Cab Pickup p/b 6.2L V8 Gas Eng, A/T, w/ 6'8" Bed, Weather Guard Tool Box, Spring Susp, 265/70R17, THIS ENGINE COULD NOT BE STARTED. THE MAIN COMPONENTS COULD NOT BE OPERATIONALLY CHECKED. KEYS LOCATED IN THE OFFICE VIN/SN: 1FT7W2B69HEE58015 Meter Reads: 104548 K#: K018414

Choice of 4 - Lots 1138-1141 1138 2 Y 2014 Ford F250 XL 4x4 Crew

Cab Pickup p/b 6.7L V8 Diesel Eng, DEF, A/T, w/ 8' Bed, Spring Susp, 285/70R17, THIS ENGINE COULD NOT BE STARTED. THE MAIN COMPONENTS COULD NOT BE OPERATIONALLY CHECKED. KEYS LOCATED IN THE OFFICE VIN/SN: 1FT7W2BT7EEA90807 K#: K018415

1139 2 Y 2014 Ford F250 XL INOP Crew

Cab Pickup p/b 6.7L V8 Diesel Eng, DEF, A/T w/ 8' Bed, L-Shaped Fuel Tank, Weather Guard Tool Box, Spring Susp, 265/70R17, KEYS LOCATED IN OFFICE VIN/SN: 1FT7W2BT2EEB40979 K#: K018417

1140 2 Y 2014 Ford F250 XL 4x4 INOP

Crew Cab Pickup p/b 6.7L V8 Diesel Eng, DEF, A/T w/ 8' Bed, Spring Susp, 265/70R17, NO KEY VIN/SN: 1FT7W2BT5EEA90806 K#: K018420

1141 2 Y 2012 Ford F250 XL Crew Cab

Pickup p/b 6.2L Gas Eng, A/T, w/ 6'8" Bed, Spring Susp, 265/70R17, THIS ENGINE COULD NOT BE STARTED. THE MAIN COMPONENTS COULD NOT BE OPERATIONALLY CHECKED. KEYS LOCATED IN THE OFFICE VIN/SN: 1FT7W2A64CED06587 K#: K018413




Choice of 2 - Lots 1142-1143 1142 2 Y 2018 Ford F150 XL Crew Cab

Pickup p/b 5.0L V8 Gas Eng, A/T w/ 5'6" Bed, Weather Guard Tool Box, Spring Susp, 265/70R17, KEYS LOCATED IN THE OFFICE VIN/SN: 1FTEW1C59JKC36086 Meter Reads: 116159 K#: K018411

1143 2 Y 2014 Ford F150 XLT 4x4 INOP

Crew Cab Pickup p/b 5.0L V8 Gas Eng, A/T, w/ 5'6" Bed, Spring Susp, 275/65R18, NO KEY VIN/SN: 1FTFW1EF7EKD27079 K#: K018418

Choice of 2 - Lots 1144-1145 1144 2 Y 2014 Ford E350 XL INOP 11

Passenger Crew Van p/b 5.4L V8 Gas Eng, A/T w/ Spring Susp, 245/75R16, KEYS LOCATED IN THE OFFICE VIN/SN: 1FBSS3BL7EDA66321 K#: K018421

1145 2 Y 2013 Ford E350 XL INOP 14

Passenger Crew Van p/b 5.4L V8 Gas Eng, A/T w/ Spring Susp, 245/75R16, KEYS LOCATED IN THE OFFICE VIN/SN: 1FBSS3BL4DDB25548 K#: K018422

TRAILERS 1146 2 C 2010 Wells Cargo 7’6”W x 16’L

T/A Enclosed Utility Trailer w/ 5000# Axles, Ball Hitch, Elec Brakes, Nose Cone, 225/75R15, Wired for Elec, (2) Roof Mtd A/C Units VIN/SN: 1WC200G27A2065267 K#: K018363*

1147 2 M 8' w x 28'L T/A Mobile Office

w/ (2) Offices, Bathroom, Walkway w/ Alum Steps, Wall Mtd A/C Unit, Ball Hitch, Elec Brakes, Spring Susp, 8-14.5 VIN/SN: 48099 K#: K018474

Choice of 6 - Lots 1148-1153 1148 2 C 2012 Forest River Sand Piper

33’L T/A Travel Trailer w/ Ball Hitch, (2) Slide-Outs, Canopy, Spring Susp, 225/75R15, (1) Bedroom, Full Kitchen & Bathroom, (2) Roof Mtd A/C Units VIN/SN: 4X4TSAH28CJ026471 K#: K015010*

1149 2 C 2012 Forest River Sandpiper

33’ T/A Travel Trailer w/ Ball Hitch, (2) Slide-Outs, (2) Roof Mtd A/C Units, Spring Susp, 225/75R15, (1) Bedroom, Full Kitchen & Bathroom VIN/SN: 4X4TSAH27CJ026185 K#: K015030*




1150 2 C 2011 Forest River Windjammer 33’ T/A Travel Trailer w/ Ball Hitch, (2) Slide-Outs, Electric Leveling Jacks, (1) Roof Mtd A/C Unit, 225/75R15, (1) Bedroom, Full Kitchen & Bathroom VIN/SN: 4X4TRLF25B1837296 K#: K015029*

1151 2 C 2013 Dutchmen 25’ T/A Travel

Trailer w/ (1) Bedroom, Bunk Beds, Full Kitchen & Bathroom, Canopy, Ball Hitch, (1) Roof Mtd A/C Unit, Spring Susp, 205/75R14 VIN/SN: 47CTDEN25DM447008 K#: K018473

1152 2 C 2015 Forest River Wildwood

27' T/A Travel Trailer w/ (1) Slide-Out, Canopy, Roof Mtd A/C Unit, (1) Bedroom, Bunk Beds, Full Kitch & Bathroom, Ball Hitch, Elec Jacks, Elec Brakes, Spring Susp, 205/75R15 VIN/SN: 4X4TWDD27FA255076 K#: K018463

1153 2 C 2012 Forest River Rockwood

25’L T/A Travel Trailer w/ Ball Hitch, Elec Leveling Legs, (1) Slide-Out, 205/75R14, (1) Bedroom, Full Kitch & Bathroom, (1) Roof Mtd A/C Unit VIN/SN: 4X4TRLB24CD115677 K#: K015011*

Choice of 5 - Lots 1154-1158 1154 2 C 2015 Forest River Wildwood

25'L T/A Travel Trailer w/ Ball Hitch, Elec Brakes, Elec Jacks, Canopy, Spring Susp, 205/75R14, (1) Bedroom, Bunk Beds, Full Kitchen & Bathroom, (1) Roof Mtd A/C Unit, VIN/SN: 4X4TWDB20F7347887 K#: K018481


27’6”L T/A Travel Trailer w/ Ball Hitch, Elec Brakes, Elec Jack, (1) Slide-Out, Canopy, Spring Susp, 225/75R15, (1) Bedroom, Full Kitchen & Bathroom, (1) Roof Mtd A/C VIN/SN: 4X4TWDD29FA254916 K#: K018483

1156 2 C 2012 Forest River Rockwood

29’L T/A Travel Trailer w/ Ball Hitch, Elec Brakes, (1) Slide-Out, 225/75R15, (2) Bedrooms, Full Kitchen & Bathroom, (1) Roof Mtd A/C Unit, Outdoor Cooking Area w/ Sink, Cook top & Mini Refrigerator, Aux Shower VIN/SN: 4X4TRLH26C1843574 K#: K018482


27’L T/A Travel Trailer w/ Ball Hitch, Elec Brakes, Elec Jack, (1) Slide-Out, Canopy, Spring Susp, 225/75R15, (1) Bedroom, Full Kitchen & Bathroom, (1) Roof Mtd A/C, DOOR LOCKED VIN/SN: 4X4TWDD26FA254324 K#: K018484




1158 2 C 2013 Dutchmen 25’L T/A Travel Trailer w/ Ball Hitch, Canopy, Spring Susp, 205/75R14, (1) Bedroom, Bunk Beds, Full Kitchen & Bathroom, (1) A/C Unit VIN/SN: 47CTDEN25DT209830 K#: K018485

Choice of 2 - Lots 1159-1160 1159 2 C 2010 Ameri-Tech T/A Change

House w/ Shower, Toilet, Urinal, Sink, Hot Water Heater, Ball Hitch, Elec Brakes, Spring Susp, 8-14.5 VIN/SN: 31100326 K#: K017037

1160 2 C 2011 General Shelters T/A

Change House w/ Shower, Urinal, Sink, Hot Water Heater, Ball Hitch, Elec Brakes, Spring Susp, 8-14.5 VIN/SN: 66660 K#: K017038

Choice of 5 - Lots 1161-1165 1161 4 B 2019 PJ 41'L T/A GN Flatbed

Trailer Type FD302, GVWR 25,000 LBS, GAWR 10,000 LBS Ea, Safety Chains, Manual Jacks, Front Storage Box, 25’L x 8’1”W Deck w/6’L Dovetail, OAL 41’, Spring Assisted Fold Down Monster Ramps, ST235/80R16 Tires w/Alloy Wheels, (1) Full Size Spare, Seller Asset 4333, VIN 4P5FD3025K1297190. VIN/SN: 4P5FD3025K1297190 K#: K28563

1162 5 B 2019 PJ G/N T/A Flatbed Trailer GVWR 25,000 LBS, GAWR 10,000 LBS Ea, Safety Chains, Dual Manual Jacks, Front Storage Compartment, Spring Assisted Fold Down Monster Load Ramps, 25’L x 8’1”W Deck w/6’L Dovetail, OAL 41’, ST235/80R16 Tires w/Steel Wheels, Seller Asset 4334, VIN 4P5FD3025K1300055. VIN/SN: 4P5FD3025K1300055 K#: K28527

1163 5 B 2017 PJ G/N T/A Flatbed Trailer

(NEEDS TIRE) GVWR 25,000 LBS, GAWR 12,000 LBS Ea, Safety Chains, Dual Manual Jacks, Front Storage Compartment, Spring Assisted Fold Down Monster Load Ramps, 30’2”L x 8’1”W Deck w/6’L Dovetail, OAL 45’, ST235/80R16 Tires w/Alloy Wheels, Seller Asset 4319, VIN 4P5FD3526J1274122. INNER REAR PASSENGER DUAL TIRE IS SHREDDED, WILL NEED A REPLACEMENT PRIOR TO MOVE. VIN/SN: 4P5FD3526J1274122 K#: K28528

1164 4 B 2009 Load Max 34'L T/A GN

Flatbed Trailer (TRAILER ONLY) DOES NOT INCLUDE ASSETS SHOWN ON TOP OF TRAILER. GVWR 28,000 LBS, Safety Chains, Manual Jacks, Front Storage Box, 24’L x 8’1”W Deck, OAL 34’, ST235/80R16 Tires w/Steel Wheels, (1) Full Size Spare, Seller Asset 4308, VIN 5L8GS242191015735. VIN/SN: 5L8GS242191015735 K#: K28564




1165 2 C 1998 Tri-Star Trailer 8’W x 30’L T/A Gooseneck Equipment Trailer w/ 7000# Axles, Elec Brakes, Spring Susp, 7.50R16 VIN/SN: 1T9FS3026WW500302 K#: K017044*

Choice of 3 - Lots 1166-1168 1166 2 C 2008 Lamar 8’W x 35’L T/A

Gooseneck Equipment Trailer Elec Brakes, Spring Susp, 7.50R16 VIN/SN: 5RVGN32248M000321 K#: K017007*

1167 2 C 2004 Target 8’W x 35’L T/A

Gooseneck Equipment Trailer w/ 6000# Axles, Elec Brakes, Spring Susp, 7.50R16 VIN/SN: 5H0GU322X4S005177 K#: K017006*

1168 2 C 2006 8'W x 30'L S/A

Gooseneck Equipment Trailer w/ 4' Dove Tail, Elec Brakes, Spring Susp, 235/85R16 VIN/SN: 4BEBF342X6C143275 K#: K018407

1169 1 C 2011 Apache 8’x24’ TA

Gooseneck Trailer (INOP) T/A Flatbed Trailer (Trailer Can Not Be Towed Down Road) VIN/SN: 4XVGG2436BD103877 K#: K22122

Choice of 2 - Lots 1170-1171 1170 5 B 2005 Hay Shed B/P T/A Flatbed

Trailer GVWR 13,459 LBS, Safety Chains, Single Manual Jack, 16’6”L x 6’8”W Deck, OAL 21’, LT235/85R16 Tires w/Steel Wheels, Seller Asset 4310, VIN 2H9TL26D351058196. VIN/SN: 2H9TL26D351058196 K#: K28534

1171 1 C 2014 Stagecoach 14’L x 8’6”W

T/A Utility Trailer Bumper-Pull, (4) Leveling Jacks, Top Mounts, ST235/80R16 Tires VIN/SN: 5NYBU1024ENSC7439 K#: K25712*

1172 2 V 2015 Tiger Trailers 8313T52

7'W x 18'L T/A Equipment Trailer w/ 5200# Axles, Ball Hitch, Elec Brakes, LWS Vac Unit w/ Jurop Pump p/b Honda 1 cyl Gas Eng, Spring Susp, 225/75R15 VIN/SN: 5UTBU1826FM002796 K#: K018408

1173 2 V 2015 Lamar UT1614 7'W x 16'L

T/A Equipment Trailer w/ 7000# Axles, Ball Hitch, Spring Susp, 7.50R16, FRONT AXLE REMOVED VIN/SN: 5RVUT1627FM026416 K#: K018409




1174 2 C 2016 Texas Bragg NA508ST29 S/A Utility Trailer w/ 2995# Axle, Ball Hitch, Satellite Dish Stand, 205/75D15 VIN/SN: 17XFT0819G1055001 K#: K017046*

1175 1 C 6'W x 16'L x 8H' T/A Trash

Trailer w/ Contents: Trash Pumps & Hoses K#: K22120

1176 2 C 2012 Lawhorn 7’W x 16’L T/A

Cooling Trailer w/ Ball Hitch, Elec Brakes, Spring Susp, 205/75D15, Bench Seating, (2) 14"W x 102"L x 12"H Alum Tanks, VIN/SN: 44ZTK1624CT015542 K#: K018479

Choice of 2 - Lots 1177-1178 1177 16 U 1982 T/A B/P Trailer

Manual Jack, Safety Chains, Pintle Hook, Mtd Reel A-Frame, 10.00-15TR Tires w/Steel Wheels, OAL 16’. VIN/SN: UT9CF2876CWCFY001 K#: K30372

1178 16 U 1995 Homemade T/A B/P

Trailer W/11'L X 4'D Tank T/A 8.25R15TR Tires, Manual Jack, Safety Chain, Pintle Hook, OAL 21’. UNIT MISSING VIN PLATE. **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: No Vin Available K#: K30359

Choice of 3 - Lots 1179-1181 1179 2 C 2018 East Texas Trailers 16’

T/A Fuel Containment Trailer w/ 7000# Axles, Ball Hitch, (5) 108 Gal Fuel Tanks, Spring Susp, 235/80R16 VIN/SN: 58SBT1628JE009810 K#: K018416

1180 2 C 2017 Texas Trailers 8’W x 16’L

T/A Fuel Containment Trailer w/ (5) Fuel Tanks, 7000# Axles, Ball Hitch, Elec Brakes, Spring Susp, 235/85R16 VIN/SN: 58SBT1621HE007469 K#: K017008*

1181 2 C 2014 Parker Trailers 8’W x 16’L

T/A Fuel Containment Trailer w/ (4) Fuel Tanks, 7000# Axles, Ball Hitch, Elec Brakes, Spring Susp, 235/85R16 VIN/SN: 13ZHP1620E1002002 K#: K017009*

Choice of 2 - Lots 1182-1183 1182 2 C 2013 Orteq GNHT T/A

Gooseneck Hose Tugger Trailer w/ Hyd Hose Tugger p/b 1 Cyl, 10000# Axles, Elec Brakes, 235/80R16 Duals, VIN/SN: 1Z9GU2829DG384681 K#: K017011*




1183 1 C 2013 Orteq 28'L T/A GN 20K Hose Tugger Trailer Orteq 20K Hose Tugger, Tool Racks, Folding Rear Drop-Down Ramp, Landing Gear, Misc. Hose, Battery, 7.50R16LT Dual Tires (Lic# OK-AH2396) VIN/SN: 1Z9GU2827DG384629 K#: K25710*

1184 7 F 2014 Lamar Monorail T/A

Gooseneck Trailer 7’W x 30’L Wood Deck, 35’L Monorail, Dual Landing Gear, Spring Suspension, 235/75 R16 Tires, Steel Wheels, (2) Stabilizer Jacks, TX-713-960H (Asset# 306) VIN/SN: 5RVGC3022EM024668 K#: K24924

Choice of 2 - Lots 1185-1186 1185 2 C 2008 Top Hat LH16X7-10EF

7'W x 16'L T/A Monorail Trailer w/ Ball Hitch, Elec Brakes, Spring Susp, 235/85R16, Racking Boards VIN/SN: 4R7BU16208T083325 K#: K018461

1186 2 C 2007 Shop Fabricated 7'W x

16'L T/A Gooseneck Monorail Trailer w/ 2-Ton Crane Hoists, Hardline Racks, Spring Susp VIN/SN: 2007204302J K#: K017042*

Choice of 2 - Lots 1187-1188 1187 2 C 2010 Orteq GNPT 8’W x 35’L

T/A Gooseneck Pipe Trailer W/ 6000# Axles, Spring Susp VIN/SN: 1Z9GU3524AG384027 K#: K017041*

1188 2 C 2010 Orteq GNPT 8’W x 35’L

T/A Gooseneck Pipe Trailer w/ 6000# Axles, 235/85R16 VIN/SN: 1Z9GU3523AG384018 K#: K017043*

1189 2 C 2008 Miller EZE Load 102” S/A

Reel Trailer w/ Hyd Lift Cylinder, Ball Hitch, Spring Susp, Rolling Tail Board, 205/75D15 VIN/SN: 149BS12138G138250 K#: K018362*

1190 2 J 2015 Shop Fabricated T/A

Derrick Dolly w/ Beam Susp, 11R24.5 VIN/SN: NM203320 K#: K018459

1191 2 J Full Set of Derrick Bolsters

w/ 12' - 22' Bolsters, Crown Bolster, Storage Rack K#: K018460




1192 2 J 2005 Holden HRD50 8'6"W x 37'L Tri/Axle Oilfield Lowboy Trailer w/ 21700# Axles, 9' Neck, Inverted 5th Wheel, Rolling Tail Board, Spring Susp, 11R22.5 VIN/SN: 12HRD47345N509629 K#: K018457

1193 2 J 1970 Nabors 8'W x 35'L 50-Ton

Tri/Axle Oilfield Lowboy Trailer w/ 8' Neck, Inverted 5th Wheel, Rolling Tail Board, Spring Susp, 275/70R22.5 VIN/SN: 16956LD3 K#: K018456

1194 4 B 2011 Fontaine 48'L T/A Step

Deck Trailer M/N HAUSD12CTA, GVWR 74,684 LBS, GAWR 20,000 LBS Each, Manual Jacks, 10’L Front Deck, 38’L Rear Deck, Mtd Storage Skid w/Chains & Storage Box, 255/70R22.5 Tires w/Alloy Wheels, Seller Asset 4604, VIN 13N248206B1552698. MINOR DAMAGE TO TRAILER DECKING. VIN/SN: 13N248206B1552698 K#: K28589

1195 7 F 2001 Witzco Challenger 35-Ton

T/A RGN Lowboy Trailer 8’-6” W x 22’-6”L Wood Main Deck, 9’L Deck Over Axles, (2) 24”L Folding Ramps on Front F/Loading, RGN P/B Single Cylinder Gas Engine, D-Rings, Oversize Fold-Out Beams, Spring Suspension, King Pin, 11 R22.5 Tires, Budd Wheels (NM-5631FTG) (Asset#LB192) VIN/SN: 1W8A11D241S000437 K#: K24925

Choice of 2 - Lots 1196-1197 1196 2 AE 2009 Doonan 482FC12A

80000# Tri/A Generator Trailer Chassis w/ (2) Ace C96C Air Cooled Exchangers, Walk Way, A/R Susp, 315/80R22.5, Manual Jack, Overall Dimensions : W: 12'10", L: 50'4", H: 14'8" VIN/SN: 1D9BV483891609123 K#: K018386

1197 2 AE 2009 Doonan 482FC12A

80000# Tri/A Generator Trailer Chassis w/ (2) Ace C96C Air Cooled Exchangers, Walk Way, A/R Susp, 315/80R22.5, Manual Jack, Overall Dimensions : W: 12'10", L: 50'4", H: 14'8" VIN/SN: 1D9BV483391609099 K#: K018385

1198 2 J Nabors 8'W x 36'L T/A Oilfield

Flatbed Trailer w/ Inverted 5th Wheel, Spring Susp, 11R22.5, Rolling Tailboard VIN/SN: NM939336883 K#: K018480




CRANE / CRANE TRUCKS / RIG-UP TRUCKS 1199 2 G 2010 Link-Belt HTC8660 60-

Ton Hydraulic Truck Crane p/b Caterpillar C13 ACERT 365 Hp 6 Cyl Diesel Eng, DPF, A/T, A/C, Rooster Sheave, 36-Ton 2-Sheave Block, Johnson 356# Ball, 117.46' 4-Section Boom, Anti Two-Block, Greer LMI, Rated Capacity Limiter, Aux Winch, 5th Outrigger, (3) 3600# Counter Weights, Counter Weight Removal Device, Alum Wheels, 8-Bag A/R Susp, 425/65R22.5 F, 11R22.5 R, THIS ENGINE COULD NOT BE STARTED. THE MAIN COMPONENTS COULD NOT BE OPERATIONALLY CHECKED. VIN/SN: 1F9L8K01XAL028255 Meter Reads: 47737 K#: K018486

1200 2 M 2007 Sterling LT8500 T/A INOP

w/ National 11105 Hyd Truck Crane p/b Caterpillar C9 350 Hp Diesel Eng, Eaton Fuller 8LL Trans, w/ 31' 3-Section Boom, 1-Sheave Block, Dual Controls, Knapheide 8'W x 22'L Flat Bed, Hyd Outriggers, 258" WB, Hendrickson Spring Over Beam Susp, 20000# F, 40000# Rears, PTO, 425/65R22.5 F, 11R22.5 R, NO KEY. BUYER IS RESPONSIBLE FOR THE REMOVAL OF THIS ITEM VIN/SN: 2FZHAWDA87AX08715 K#: 017936*

1201 2 M 2006 Freightliner M2 106 T/A Bucket Truck p/b Caterpillar C7 250Hp 6 Cyl Diesel Eng, Allison A/T, w/ 18000# Frt, 40000# Rears, Altec AM900-E100 91' Insulated Boom, 18' Bed, Hyd Outriggers, 243" WB, Spring Susp, 315/80R22.5 F, 11R22.5 R, 6015 Hrs, 13'3" Operating Height VIN/SN: 1FVHCYDC36HW99801 Meter Reads: 22002 K#: K018466

1202 2 J 2005 International 5600i T/A

Gin Pole Truck p/b Cummins ISX 435V 15 L 6 Cyl Diesel Eng, Spicer 6 Spd Trans, Spicer AMO 1000 4 Spd Aux Trans, w/ 20000# Frt, 58000# Rears, PTO, Tulsa 80 100000# Main Winch, Tulsa 34 Secondary Winch, Tulsa Underslung 24 Winch, 21'6" Gin Poles, 21' Steel Flat Bed, King Pin, Rolling Tail Board, 298" WB, Hendrickson Spring Over Beam Susp, 455/65R22.5 F, 11R24.5 R VIN/SN: 1HSXHAPT25J172407 Meter Reads: 428245 K#: K015041

1203 2 J 2002 International 5600i T/A

Gin Pole Truck p/b Cummins N14 Select Plus 435 Hp 6 Cyl Diesel Eng, Spicer 6 Spd Trans, Spicer AMO 1000 4 Spd Aux Trans, w/ 20000# Frt, 58000# Rears, PTO, Tulsa 80 100000# Main Winch, Tulsa 34 Secondary Winch, Tulsa Underslung 24 Winch, 21'6" Gin Poles, 21' Steel Flat Bed, King Pin, Rolling Tail Board, 298" WB, Hendrickson Spring Over Beam Susp, 455/65R22.5 F, 11R24.5 R VIN/SN: 1HTXHAET92J033059 Meter Reads: 517823 K#: K015042




Choice of 3 - Lots 1204-1206 1204 2 L 2007 Kenworth T800 T/A Winch

Truck p/b CAT Cll ACERT 335Hp Diesel Eng, Eaton Fuller FRO14210C 10Spd Trans, w/ 12000# F, RT44-145P 44000# Rears, PTO, Braden AMS20-18B 40000# Mechanical Winch, Lowboy Ramps, Tail Roller, 172" WB, Neway A/R Susp, 11R22.5, NOTE: NO KEY. THIS ENGINE COULD NOT BE STARTED. THE MAIN COMPONENTS COULD NOT BE OPERATIONALLY CHECKED. VIN/SN: 1XKDDT9X37R163078 K#: K018472

1205 2 L 2007 Kenworth T800 T/A Winch

Truck p/b CAT Cll ACERT 335Hp Diesel Eng, Eaton Fuller FRO14210C 10Spd Trans, w/ 12000# F, RT44-145P 44000# Rears, PTO, Braden AMS20-18B 40000# Mechanical Winch, Lowboy Ramps, Tail Roller, 172" WB, Neway A/R Susp, 11R22.5, NOTE: NO KEY. THIS ENGINE COULD NOT BE STARTED. THE MAIN COMPONENTS COULD NOT BE OPERATIONALLY CHECKED. VIN/SN: 1XKDDT9X67J160822 K#: K018471

1206 2 L 2005 Kenworth T800 T/A Winch Truck p/b CAT Cll ACERT 335Hp Diesel Eng, Eaton Fuller FRO14210C 10Spd Trans, w/ 12000# F, RT44-145P 44000# Rears, PTO, Braden AMS20-18B 40000# Mechanical Winch, Lowboy Ramps, Tail Roller, 172" WB, Neway A/R Susp, 11R22.5, NOTE: NO KEY. PTO SHAFT REMOVED. THIS ENGINE COULD NOT BE STARTED. THE MAIN CMOPONENTS COULD NOT BE OPERATIONALLY CHECKED. VIN/SN: 1XKDDT9X55J082045 Meter Reads: 151247 K#: K018470

1207 1 K 2007 GMC C5500 4x4 Crew

Cab S/A Winch Truck (INOP) p/b Duramax 8 Cylinder Diesel Engine, Air Conditioner, Cruise Control, Power Windows, Engine Brake, Exhaust Brake, Automatic Transmission, 8000 lb Front Axle, 13500 lb Rears, 19500 lb GVWR, Aluminum Wheels, 245/70R19.5 Front Tires, 245/70R19.5 Rear Tires, Spring Suspension, 224 in Wheelbase, 14 ft 10 in x 95 in Bed, Rotzler Winch, VIN/SN: 1GDE5E39X7F419314 K#: K22107




1208 1 K 2005 Freightliner TRK 4x2 Sleeper S/A Winch Truck 6 Cylinder Diesel Engine, 2005 US EPA Label, CARB Compliant, Air Conditioner, Cruise Control, Power Windows, Engine Brake, Eaton Fuller 10-Speed Manual Transmission, Differential Lock, 6350 kg Front Axle, 100432 kg Rears, 16783 kg GVWR, Flat Top Sleeper Cab, Aluminum Wheels, 11R24.5 Front Tires, 11R24.5 Rear Tires, Air Ride Suspension, 188 in Wheelbase, PTO, 13 ft 9 in x 96 in Bed, Rotzler Winch, VIN/SN: 1FVACYDJ76HV47696 K#: K22108

1209 1 K 2001 Freightliner 6x2 T/A

Winch Truck (INOP) p/b Detroit Series 60 6 Cylinder 12.7 L Diesel 430 hp Engine, Air Conditioner, Cruise Control, Meritor Manual Transmission, 12000 lb Front Axle, 40000 lb Rears, 52000 lb GVWR, Air Ride Cab, 58 in Flat Top Sleeper Cab, Aluminum Wheels, 11R24.5 Front Tires, 11R24.5 Rear Tires, 312 in Wheelbase, Wet Kit, Winch, Dual Fuel Tanks VIN/SN: 1FUJAHCG81LH72508 Meter Reads: 25792 K#: K22106

1210 2 M 1969 Kaiser 5-Ton 6x6 Day Cab

Truck Tractor p/b 6 Cyl Diesel Eng, 5 Spd Trans, w/ 167" WB, Spring Susp, 16.00R20, 1421 Hrs VIN/SN: 12642 Meter Reads: 18207 K#: K018467

FRAC HEATERS / FRAC PUMPERS / FRAC EQUIPMENT

1211 12 Q 1999 Sterling A9522 6x4 T/A Frac Water Super Heater Truck (INOP) p/b CAT 3406 14.6L Diesel Engine, Eaton Fuller 18-Spd Trans, 268"WB, Air Ride Suspension, Alum Budd Wheels, 315/80R22.5 Front & 11R24.5 Rear Tires, w/Burner, Propane Tank, & Mission 2500 Supreme 4x4 Centrifical Pump VIN/SN: 2FWYGXYB9XAB42197 K#: K00RBA3

Choice of 2 - Lots 1212-1213 1212 12 Q 2009 Overland T/A Frac Water

Super Heater Trailer w/Burner, Propane Tank, Mission Magnum 5x4 Centrifical Pump p/b J.Deere 4-Cyl Diesel Engine, All Mtd. on T/A Frac Water Super Heater Trailer, Air Ride Suspension, 255/70R22.5 Tires VIN/SN: 1Z92H352891258198 K#: K00RBA2

1213 12 Q 2006 Overland T/A Frac Water

Super Heater Trailer w/Burner, Propane Tank, Mission Centrifical Pump (Disassembled), p/b J.Deere 4-Cyl Diesel Engine, All Mtd. on T/A Frac Water Super Heater Trailer, Rayco Spring Suspension, 225.70R22.5 Tires VIN/SN: 1Z920332261258624 K#: K00RBA1




Choice of 9 - Lots 1214-1222 1214 2 Y 2011 NOV Rolligon TPT-2251

2250 HP T/A Frac Pumper HPU p/b Cummins QSKTA50-CE 2250 Hp 3067 CID V12 Diesel Eng, Caterpillar Trans, w/ AW Flow Products 8" Triplex Pump, Kerr THD45A007 4.50" 14,147 Psi Forged Steel Fluid End, Mtd on 2011 Mertz 7018-01-000 80000# Trailer w/ 20280# Axles, A/R Susp, Alum Wheels, 275/70R22.5, SN: SF11-7090H VIN/SN: 1M91P4426BA211474 K#: K018430

1215 2 Y 2011 NOV Rolligon TPT-2251

2250 HP T/A Frac Pumper HPU p/b Cummins QSKTA50-CE 2250 Hp 3067 CID V12 Diesel Eng, Caterpillar Trans, w/ Gardner Denver GD-2250T 8" Triplex Pump, 5" 12,102 Psi Forged Steel Fluid End, Mtd on 2011 Mertz 7018-01-000 80000# Trailer w/ 20280# Axles, A/R Susp, 275/70R22.5, SN: SF10-7024C VIN/SN: 1M91P4424BA211425 K#: K018427


2250 HP T/A Frac Pumper HPU p/b Cummins QSKTA50-CE 2250 Hp 3067 CID V12 Diesel Eng, Caterpillar Trans, w/ JMAC 2250 8" Triplex Pump, Kerr THD45A007 4.50" 14,1417 Psi Forged Steel Fluid End, Mtd on 2011 Mertz 7018-01-000 80000# Trailer w/ 20280# Axles, A/R Susp, 275/70R22.5, Alum Wheels, SN: SF10-7024G VIN/SN: 1M91P442XBA211431 K#: K018432

1217 2 Y 2011 NOV Rolligon TPT-2251 2250 HP T/A Frac Pumper HPU p/b Cummins QSKTA50-CE 2250 Hp 3067 CID V12 Diesel Eng, Caterpillar Trans, w/ Gardner Denver GD-2250T 8" Triplex Pump, Kerr THDF1X45A003 4.50" 15000 Psi Forged Steel Fluid End, Mtd on 2011 Mertz 7018-01-000 80000# Trailer w/ 20280# Axles, A/R Susp, 275/70R22.5, SN: SF10-7024H VIN/SN: 1M91P4421BA211432 K#: K018429


2250 HP T/A Frac Pumper HPU p/b Cummins QSKTA50-CE 2250 Hp 3067 CID V12 Diesel Eng, Caterpillar Trans, w/ OFM 2250 8" Triplex Pump, SPM TWS2250-SS 5" Stainless Steel 12,150 Psi Forged Steel Fluid End, Mtd on 2011 Mertz 7018-01-000 80000# Trailer w/ 20280# Axles, A/R Susp, 275/70R22.5, SN: SF10-7024F VIN/SN: 1M91P442XBA211428 K#: K018428


2250 HP T/A Frac Pumper HPU p/b Cummins QSKTA50-CE 2250 Hp 3067 CID V12 Diesel Eng, Caterpillar Trans, w/ Forum 8" Triplex Pump, Hercules TWS-2250 5" 11,500 Psi Forged Steel Fluid End, Mtd on 2011 Mertz 7018-01-000 80000# Trailer w/ 20280# Axles, A/R Susp, 275/70R22.5, Alum Wheels, SN: SF11-7090I VIN/SN: 1M91P4429BA211470 K#: K018437




1220 2 Y 2011 NOV Rolligon TPT-2401 2250 HP T/A Frac Pumper HPU p/b Cummins QSKTA50-CE 2250 Hp 3067 CID V12 Diesel Eng, Caterpillar Trans, w/ Gardner Denver GD-2250T 8" Triplex Pump, Kerr THDF1X45A003 4.50" 15000 Psi Forged Steel Fluid End, Mtd on 2011 Mertz 7018-01-000 80000# Trailer w/ 20280# Axles, A/R Susp, 275/70R22.5, Alum Wheels, SN: SF11-7090P VIN/SN: 1M91P4429BA211467 K#: K018439


2250 HP T/A Frac Pumper HPU p/b Cummins QSKTA50-CE 2250 Hp 3067 CID V12 Diesel Eng, Caterpillar Trans, w/ AW Flow Products 8" Triplex Pump, Gardner Denver 5.5" 10,000 Psi Forged Steel Fluid End, Mtd on 2011 Mertz 7018-01-000 80000# Trailer w/ 20280# Axles, A/R Susp, 275/70R22.5, alum Wheels, SN: SF10-7024E VIN/SN: 1M91P4428BA211427 K#: K018436


2250 HP T/A Frac Pumper HPU p/b Caterpillar 3512 2250 Hp V12 Diesel Eng, w/ JMAC J2250 8" Triplex Frac Pump, Hercules TWS-2250 5" Forged Steel Fluid End, Mtd on 2011 Mertz 7018-01-000 80000# T/A Trailer w/ 20280# Axles, A/R Susp, 275/70R22.5, SN: SF10-7018G VIN/SN: 1M91P4426BA211412 K#: K018423

Choice of 3 - Lots 1223-1225 1223 2 Y 2007 NOV Rolligon TPT-2251

2250 HP T/A Frac Pumper HPU p/b Cummins QSK45 2250 Hp V12 Diesel Eng, Stewart & Stevenson S9820-M Trans, w/ Gardner Denver GD-2250T 8" Triplex Pump, Hercules TWS-2250 5" 11,500 Psi Forged Steel Fluid End, Mtd on 2007 Rolligon 80000# Trailer w/ 23360# Axles, A/R Susp, 275/70R22.5, Alum Wheels, SN: SF05-2364A VIN/SN: 1R9S042247A494049 K#: K018431

1224 2 Y 2006 NOV Rolligon 2250 HP

T/A Frac Pumper HPU p/b Cummins QSK-45 V12 Diesel Eng, Ralston S9820M Trans, w/ Dragon 2250 8" Triplex Pump, Hercules TWS-2250 5" 11,500 Psi Forged Steel Fluid End, Mtd on 2006 80000# Trailer w/ 23360# Axles, A/R Susp, Alum Wheels, 11R22.5, VIN/SN: 1R9S042286A494040 K#: K018438


2250 HP T/A Frac Pumper HPU p/b Cummins QSK45-C 2250 Hp V12 Diesel Eng, Allison S9810M Trans, w/ AW Flow Products 2250 8" Triplex Pump, Kerr THDF1X45A002 4.50" 14,147 Psi Forged Steel Fluid End, Mtd on 2006 80000# Trailer w/ 23360# Axles, A/R Susp, Alum Wheels, 11R22.5, SN: SF05-2362P VIN/SN: 1R9S0422X6A494041 K#: K018435




1226 2 Y 2002 NOV Rolligon 2250 HP T/A Hydraulic Power Unit p/b Caterpillar 3512 2250 Hp V12 Diesel Eng, Stewart 7 Stevenson Trans, Mtd on 2002 T/A Trailer w/ Spring Susp, Alum Outers, 11R22.5 VIN/SN: 1F9GH362221239258 K#: K018426

Choice of 9 - Lots 1227-1235 1227 1 L 2013 Mertz Tri/A Frac Pump

Power Train Trailer (INOP) Frac Pump Mount Platform w/Catwalk, Pump Oil Tank, Webasto Thermodynamics Unit, Air Operated Diaphragm Pump, Oil Cooler w/Fan, Drive Shaft w/Connection Flange, A/T Transmission w/Fluid Reservoir & Horizontal Radiator w/Parker Hyd Motor, All p/b 2012 Detroit MTU 57.24L Diesel Eng, Family No. CMDD57.2XTC, Unit No. 547100329, 21,243 Metered Hours, Horizontal Radiator w/Parker Hyd Motor, Mtd Filter Element Housings, (2) Mtd Fuel Tanks, Mtd Hyd Tank, Tractor PTO Starter Lines, Motor, & Controls, Mtd Gauge Cluster, All Mtd On Tri/A Trailer Chassis, M/N 102161381, GVWR 92,000 LBS, Manual Jacks, 11R22.5 Tires w/Steel Wheels, 9,522 Metered Miles, VIN 1M91H4239DA211111, Seller Asset 12364613. UNIT IS MISSING PUMP POWER END & PUMP FLUID END. UNIT IS SELLING AS A TRAILER MTD POWER TRAIN. VIN/SN: 1M91H4239DA211111 K#: K26761*

1228 1 L 2013 Mertz Tri/A Frac Pump Power Train Trailer (INOP) Frac Pump Mount Platform w/Catwalk, Pump Oil Tank, Webasto Thermodynamics Unit, Air Operated Diaphragm Pump, Oil Cooler w/Fan, Drive Shaft w/Connection Flange, A/T Transmission w/Fluid Reservoir & Horizontal Radiator w/Parker Hyd Motor, All p/b Detroit MTU 57.24L Diesel Eng, Family No. CMDD57.2XTC, Unit No. 547100330, 21,076 Metered Hours, Horizontal Radiator w/Parker Hyd Motor, Mtd Filter Element Housings, (2) Mtd Fuel Tanks, Mtd Hyd Tank, Tractor PTO Starter Lines, Motor, & Controls, Mtd Gauge Cluster, All Mtd On Tri/A Trailer Chassis, M/N 102161381, GVWR 92,000 LBS, Manual Jacks, 11R22.5 Tires w/Steel Wheels, 16,437 Metered Miles, VIN 1M91H4232DA211080, Seller Asset 12308149. UNIT IS MISSING PUMP POWER END & PUMP FLUID END. UNIT IS SELLING AS A TRAILER MTD POWER TRAIN. VIN/SN: 1M91H4232DA211080 K#: K26760*




1229 1 L 2012 Mertz Tri/A Frac Pump Power Train Trailer (INOP) Frac Pump Mount Platform, Pump Oil Tank, Webasto Thermodynamics Unit, Oil Cooler w/Fan, Drive Shaft w/Connection Flange, A/T Transmission w/Fluid Reservoir & Horizontal Radiator w/Parker Hyd Motor, All p/b 2012 Detroit MTU 4.8L Diesel Eng, Family No. CMDD57.2XTC, Unit No. 5472000004, 55,477 Metered Hours, Horizontal Radiator w/Parker Hyd Motor, Mtd Filter Element Housings, (2) Mtd Fuel Tanks, Mtd Hyd Tank, Tractor PTO Starter Lines, Motor, & Controls, Mtd Gauge Cluster, All Mtd On Tri/A Trailer Chassis, M/N 102069694, GVWR 86,000 LBS, Manual Jacks, 11R22.5 Tires w/Steel Wheels, 1,105 Metered Miles, VIN 1M91H4231EA211666, Seller Asset 12092230. UNIT IS MISSING PUMP POWER END & PUMP FLUID END. UNIT IS SELLING AS A TRAILER MTD POWER TRAIN. VIN/SN: 1M91H4231CA211666 K#: K26754*

1230 1 L 2012 Mertz Tri/A Frac Pump Power Train Trailer (INOP) Frac Pump Mount Platform w/Catwalk, Pump Oil Tank, Webasto Thermodynamics Unit, Air Operated Diaphragm Pump, Oil Cooler w/Fan, Drive Shaft w/Connection Flange, A/T Transmission w/Fluid Reservoir & Horizontal Radiator w/Parker Hyd Motor, All p/b 2012 Detroit MTU 57.24L Diesel Eng, Family No. CMDD57.2XTC, Unit No. 547100227, 17,411 Metered Hours, Horizontal Radiator w/Parker Hyd Motor, Mtd Filter Element Housings, (2) Mtd Fuel Tanks, Mtd Hyd Tank, Tractor PTO Starter Lines, Motor, & Controls, Mtd Gauge Cluster, All Mtd On Tri/A Trailer Chassis, M/N 102069694, GVWR 86,000 LBS, Manual Jacks, 11R22.5 Tires w/Steel Wheels, VIN 1M91H4239CA211673, Seller Asset 12108120. UNIT IS MISSING PUMP POWER END, PUMP FLUID END, ENGINE STARTER, & ENGINE BLOCK INSPECTION PLATE. UNIT IS SELLING AS A TRAILER MTD POWER TRAIN. VIN/SN: 1M91H4239CA211673 K#: K26758*




1231 1 L 2012 Mertz Tri/A Frac Pump Power Train Trailer (INOP) Frac Pump Mount Platform w/Catwalk, Pump Oil Tank, Webasto Thermodynamics Unit, Air Operated Diaphragm Pump, Oil Cooler w/Fan, Drive Shaft w/Connection Flange, A/T Transmission w/Fluid Reservoir & Horizontal Radiator w/Parker Hyd Motor, All p/b 2012 Detroit MTU 57.24L Diesel Eng, Family No. CMDD57.2XTC, Unit No. 547100209, 17,297 Metered Hours, Horizontal Radiator w/Parker Hyd Motor, Mtd Filter Element Housings, (2) Mtd Fuel Tanks, Mtd Hyd Tank, Tractor PTO Starter Lines, Motor, & Controls, Mtd Control Panel & Gauge Cluster, All Mtd On Tri/A Trailer Chassis, M/N 102069694, GVWR 86,000 LBS, Manual Jacks, 11R22.5 Tires w/Steel Wheels, 6,207 Metered Miles, VIN 1M91H4237CA211557, Seller Asset 12036347. UNIT IS MISSING PUMP POWER END & PUMP FLUID END. UNIT IS SELLING AS A TRAILER MTD POWER TRAIN. VIN/SN: 1M91H4237CA211557 K#: K26755*

1232 1 L 2012 Mertz Tri/A Frac Pump Power Train Trailer (INOP) Frac Pump Mount Platform w/Catwalk, Pump Oil Tank, Webasto Thermodynamics Unit, Oil Cooler w/Fan, Drive Shaft w/Connection Flange, A/T Transmission w/Fluid Reservoir & Horizontal Radiator w/Parker Hyd Motor, All p/b 2012 Detroit MTU 57.24L Diesel Eng, Family No. CMDD57.2XTC, Unit No. 547100275, 19,280 Metered Hours, Horizontal Radiator w/Parker Hyd Motor, Mtd Filter Element Housings, (2) Mtd Fuel Tanks, Mtd Hyd Tank, Tractor PTO Starter Lines, Motor, & Controls, Mtd Gauge Cluster, All Mtd On Tri/A Trailer Chassis, M/N 102069694, GVWR 86,000 LBS, Manual Jacks, 11R22.5 Tires w/Steel Wheels, 22,904 Metered Miles, VIN 1M91H4236CA211758, Seller Asset 12129902. UNIT IS MISSING PUMP POWER END, PUMP FLUID END, & TURBOCHARGER WASTE GATE. UNIT IS SELLING AS A TRAILER MTD POWER TRAIN. VIN/SN: 1M91H4236CA211758 K#: K26757*




1233 1 L 2012 Mertz Tri/A Frac Pump Power Train Trailer (INOP) Frac Pump Mount Platform w/Catwal, Pump Oil Tank, Webasto Thermodynamics Unit, Oil Cooler w/Fan, Drive Shaft w/Connection Flange, A/T Transmission w/Fluid Reservoir & Horizontal Radiator w/Parker Hyd Motor, All p/b 2012 Detroit MTU 57.24L Diesel Eng, Family No. CMDD57.2XTC, Unit No. 547100206, 18,189 Metered Hours, Horizontal Radiator w/Parker Hyd Motor, Mtd Filter Element Housings, (2) Mtd Fuel Tanks, Mtd Hyd Tank, Tractor PTO Starter Lines, Motor, & Controls, Mtd Control Panel & Gauge Cluster, All Mtd On Tri/A Trailer Chassis, M/N 102161381, GVWR 86,000 LBS, Manual Jacks, 11R22.5 Tires w/Steel Wheels, 8,316 Metered Miles, VIN 1M91H4237CA211526, Seller Asset 12018228. UNIT IS MISSING PUMP POWER END & PUMP FLUID END. UNIT IS SELLING AS A TRAILER MTD POWER TRAIN. VIN/SN: 1M91H4236CA211520 K#: K26753*

1234 1 L 2012 Mertz Tri/A Frac Pump Power Train Trailer (INOP) Frac Pump Mount Platform w/Catwalk, Pump Oil Tank, Webasto Thermodynamics Unit, Oil Cooler w/Fan, Drive Shaft w/Connection Flange, A/T Transmission w/Fluid Reservoir & Horizontal Radiator w/Parker Hyd Motor, All p/b 2012 Detroit MTU 4.8L Diesel Eng, Family No. CMDD57.2XTC, Unit No. 5472000025, 18,889 Metered Hours, Horizontal Radiator w/Parker Hyd Motor, Mtd Filter Element Housings, (2) Mtd Fuel Tanks, Mtd Hyd Tank, Tractor PTO Starter Lines, Motor, & Controls, Mtd Gauge Cluster, All Mtd On Tri/A Trailer Chassis, M/N 102069694, GVWR 86,000 LBS, Manual Jacks, 11R22.5 Tires w/Steel Wheels, 23,456 Metered Miles, VIN 1M91H4230CA211514, Seller Asset 12072026. UNIT IS MISSING PUMP POWER END & PUMP FLUID END. UNIT IS SELLING AS A TRAILER MTD POWER TRAIN. VIN/SN: 1M91H4230CA211514 K#: K26759*




1235 1 L 2012 Mertz Tri/A Frac Pump Power Train Trailer (INOP) Frac Pump Mount Platform w/Catwalk, Pump Oil Tank, Webasto Thermodynamics Unit, Oil Cooler w/Fan, Drive Shaft w/Connection Flange, A/T Transmission w/Fluid Reservoir & Horizontal Radiator w/Parker Hyd Motor, All p/b 2012 Detroit MTU 4.8L Diesel Eng, Family No. CMDD57.2XTC, Unit No. 547200005, 17,228 Metered Hours, Horizontal Radiator w/Parker Hyd Motor, Mtd Filter Element Housings, (2) Mtd Fuel Tanks, Mtd Hyd Tank, Tractor PTO Starter Lines, Motor, & Controls, Mtd Gauge Cluster, All Mtd On Tri/A Trailer Chassis, M/N 102069694, GVWR 86,000 LBS, Manual Jacks, 11R22.5 Tires w/Steel Wheels, 16,058 Metered Miles, VIN 1M91H4232CA211756, Seller Asset 12129893. UNIT IS MISSING PUMP POWER END & PUMP FLUID END. UNIT IS SELLING AS A TRAILER MTD POWER TRAIN. VIN/SN: 1M91H4232CA211756 K#: K26762*

Choice of 12 - Lots 1236-1247 1236 1 L 2011 Mertz T/A Frac Pump

Equipment Trailer (Trailer Only) M/N 101455307, GVWR 63,000 LBS, GAWR 21,200 LBS, Manual Jacks, Various Mounting Brackets, Catwalks, 11R22.5 Tires w/ Alloy Wheels, 38,316 Metered Miles, VIN 3A9A1HZ5XB9205041. VIN/SN: 3A9A1HZ5XB9205041 K#: K26764*

1237 1 L 2011 Mertz T/A Frac Pump Equipment Trailer (Trailer Only) M/N 101455307, GVWR 63,000 LBS, GAWR 21,200 LBS, Manual Jacks, Various Mounting Brackets, Catwalks, 11R22.5 Tires w/Alloy Wheels, 6,395 Metered Miles, VIN 1M91H3627BA211892. VIN/SN: 1M91H3627BA211892 K#: K26774*

1238 1 L 2011 Mertz T/A Frac Pump

Equipment Trailer (Trailer Only) Frac Pump GVWR 63,000 LBS, GAWR 21,200 LBS, Manual Jacks, Various Mounting Brackets, Catwalks, 11R22.5 Tires w/Alloy Wheels, 7,893 Metered Miles. VIN/SN: 1M91H3620CA211704 Meter Reads: 7893 K#: K22113


Equipment Trailer (Trailer Only) Frac Pump GVWR 63,000 LBS, GAWR 21,200 LBS, Manual Jacks, Various Mounting Brackets, Catwalks, 11R22.5 Tires w/Alloy Wheels, 11902 Metered Miles. VIN/SN: 1M91H3623BA311552 K#: K22111




1240 1 L 2011 Mertz T/A Frac Pump Equipment Trailer (Trailer Only) Frac Pump GVWR 63,000 LBS, GAWR 21,200 LBS, Manual Jacks, Various Mounting Brackets, Catwalks, 11R22.5 Tires w/Alloy Wheels, 4,721 Metered Miles. VIN/SN: 1M91H3623AA211242 Meter Reads: 4921 K#: K22109


Equipment Trailer (Trailer Only) Frac Pump GVWR 63,000 LBS, GAWR 21,200 LBS, Manual Jacks, Various Mounting Brackets, Catwalks, 11R22.5 Tires w/Alloy Wheels, 24,491 Metered Miles. VIN/SN: 1M91H36307A22107 Meter Reads: 24491 K#: K22114


Equipment Trailer (Trailer Only) Frac Pump GVWR 63,000 LBS, GAWR 21,200 LBS, Manual Jacks, Various Mounting Brackets, Catwalks, 11R22.5 Tires w/Alloy Wheels, No Meter. VIN/SN: 1M91HL3622AA211054 K#: K22115

1243 1 L 2011 Mertz T/A Frac Pump Equipment Trailer (Trailer Only) Frac Pump GVWR 63,000 LBS, GAWR 21,200 LBS, Manual Jacks, Various Mounting Brackets, Catwalks, 11R22.5 Tires w/Alloy Wheels, 3118 Metered Miles. VIN/SN: 1M91H362XA221097 Meter Reads: 3118 K#: K22118


Equipment Trailer (Trailer Only) Frac Pump GVWR 63,000 LBS, GAWR 21,200 LBS, Manual Jacks, Various Mounting Brackets, Catwalks, 11R22.5 Tires w/Alloy Wheels, No Meter. VIN/SN: 1M91H3626BA211091 Meter Reads: 3406 K#: K22116


Equipment Trailer (Trailer Only) Frac Pump GVWR 63,000 LBS, GAWR 21,200 LBS, Manual Jacks, Various Mounting Brackets, Catwalks, 11R22.5 Tires w/Alloy Wheels, 7,917 Metered Miles. VIN/SN: 1M91H4627BA211022 Meter Reads: 7917 K#: K22110




1246 1 L 2011 Mertz T/A Frac Pump Equipment Trailer (Trailer Only) Frac Pump GVWR 63,000 LBS, GAWR 21,200 LBS, Manual Jacks, Various Mounting Brackets, Catwalks, 11R22.5 Tires w/Alloy Wheels, No Meter. VIN/SN: 1M91H362X6A211022 K#: K22117


Equipment Trailer (Trailer Only) Frac Pump GVWR 63,000 LBS, GAWR 21,200 LBS, Manual Jacks, Various Mounting Brackets, Catwalks, 11R22.5 Tires w/Alloy Wheels, 3,948 Metered Miles. VIN/SN: 1M91H3620BA22250 Meter Reads: 3948 K#: K22112

Choice of 2 - Lots 1248-1249 1248 2 Y 2012 NOV Enerflow BL-125 T/A

Twin Screw Frac Blender HPU p/b (2) Caterpillar C15 ACERTS,(2) Durst D13655 Pump Drives w/ (2) Gorman-Rupp VGH6D31-B Centrifugal Pumps, (4) SPX 006-U2 Hyd Pumps, Mixing Tub w/ Agitator, Hyd Auger Lift, K-Tron Coperion Chemical Feeder, Climate Controlled Operators Cabin, (4) Siemens Simatic Multi Panel Touch Screen Controls, 14-Valve Manifold w/ Actuators, 12-Valve Manifold w/ Actuators, Mtd on 2012 Peerless CH-45-3A 88184# Trailer w/ 22487# Axles, A/R Susp, Alum Wheels, 11R24.5, SN: E0111813A1301218 VIN/SN: 2PLC04537CBB16325 K#: K018425

1249 2 Y 2011 NOV Enerflow BL-125 T/A Twin Screw Frac Blender HPU p/b (2) Caterpillar C15 ACERTS,(2) Durst D13655 Pump Drives w/ (2) Gorman-Rupp VGH6D31-B Centrifugal Pumps, (4) SPX 006-U2 Hyd Pumps, Mixing Tub w/ Agitator, Hyd Auger Lift, K-Tron K2 Modular Chemical Feeder, Climate Controlled Operators Cabin, (4) Siemens Simatic Multi Panel Touch Screen Controls, 14-Valve Manifold w/ Actuators, 12-Valve Manifold w/ Actuators, Mtd on 2011 Peerless CH-45-3A 88184# Trailer w/ 22487# Axles, A/R Susp, Alum Wheels, 11R24.5, SN: E0100502A1301207 VIN/SN: 2PLC04535BBF14535 K#: K018424

Choice of 2 - Lots 1250-1251 1250 2 Y 2015 Cancade Company

Scorpian Tri/Axle Sand Silo Transport Trailer HPU p/b 4 Cyl Diesel Eng, w/ 36,287 Kg GVWR, 8164 Kg GAWR, Hendrickson A/R Susp, Alum Wheels, 235/75R17.5, VIN/SN: 2C91356E0F1086767 Meter Reads: 320 K#: K018434

1251 2 Y 2012 Cancade Company

Scorpian Tri/A Sand Silo Transport Trailer HPU p/b 4 Cyl Diesel Eng, w/ 32000 Kg GVWR, 9000 Kg GAWR, Hendrickson A/R Susp, Alum Wheels, 235/75R17.5, VIN/SN: 2C91356E4C1086279 Meter Reads: 173 K#: K018433




1252 2 W 2009 NOV Mission Sandmaster T/A Water Transfer Trailer Mission 10x8x14 Cent Pump p/b Cummins QSB6.7 260 Hp 6 Cyl Diesel Eng, twin Disc SP211HP3, w/ (3) 4" 8-Valve Manifolds, 120 Gal Fuel Tank, Mtd on 2012 Oilfield Repair Specialities T/A Trailer w/ 7000# Axles, Pintle Hitch, Spring Susp, 245/70R17.5, Racking Board, Trailer VIN: 1Z9FF212XCH368014 VIN/SN: M98489 Meter Reads: 1256 K#: K018402

NITROGEN / COILED-TUBING EQUIPMENT

Choice of 6 - Lots 1253-1258 1253 5 B 2012 Cryogenic Vessels 9,579

Gallon 3-Axle Nitrogen Bulk Trailer Operating Temp -320*F To +100*F, .121” Shell Thickness, .141” Head Thickness, Shell S/N 96117, Mtd Hyd Motor p/b Kubota 4 Cyl Diesel Engine, 34 Metered Hours, Ext Cooling Fins, Rear Mtd Centrifugal Pump w/Plumbing, Controls, & Ext Gauge Clusters, All Mtd On Tri/A Trailer Chassis, GVWR 87,184 LBS, Manual Jacks, 275/80R22.5 Tires w/Alloy Wheels, Seller Asset 8508, VIN 1C9SC4535CM811049. VIN/SN: 1C9SC4535CM811049 K#: K28536

1254 5 B 2012 Cryogenic Vessels 9,579 Gallon 3-Axle Nitrogen Bulk Trailer Operating Temp -320*F To +100*F, 40 PSI MAWP, .121” Shell Thickness, .141” Head Thickness, Shell S/N 96126, Hyd Tank & Hyd Motor p/b 4 Cyl Kubota Diesel Engine, 6 Metered Hours, Ext Controls & Gauges, Rear Mtd Centrifugal Pump w/Plumbing, Controls, & Gauge Clusters, All Mtd On Tri/A Trailer Chassis, GVWR 87,184 LBS, GAWR 11,340 LBS Ea, Manual Jacks, Ext Cooling Fins, 295/75R22.5 Tires w/Alloy Wheels, Seller Asset 8509, VIN 1C9SC4531CM810111. VIN/SN: 1C9SC4531CM810111 K#: K28551

1255 5 B 2006 Cryogenic Vessels 17,959

Gallon T/A Nitrogen Bulk Trailer Operating Temp -320*F To +100*F, .188” Shell Thickness, .207 Head Thickness, Shell S/N 18021, Mtd Hyd Motor p/b Kubota 4 Cyl Diesel Engine, 293 Metered Hours, Ext Cooling Fins, (2) Rear Mtd Centrifugal Pumps w/Plumbing, Controls, & Ext Gauge Clusters, All Mtd On T/A Trailer Chassis, GVWR 42,798 LBS, (8) Manual Jacks, 275/80R22.5 Tires w/Alloy Wheels, Seller Asset 8601, VIN 1C9SC45226M810338. VIN/SN: 1C9SC45226M810338 K#: K28537




1256 5 B 2003 Cryogenic Vessels 7,145 Gal T/A Nitrogen Bulk Trailer Operating Temp -320*F To +100*F, 81 PSI MAWP, 4.76MM Shell Thickness, 5.74MM Head Thickness, Shell S/N 76020, Ext Cooling Fins, Rear Mtd Plumbing, Controls, & Gauge Cluster, All Mtd On T/A Trailer Chassis, GVWR 66,363 LBS, GAWR 21,200 LBS Ea, Manual Jacks, 295/75R22.5 Tires w/Alloy Wheels, Seller Asset 8505, VIN 1C9SC43263M810020. VIN/SN: 1C9SC43263M810020 K#: K28553

1257 5 B 1997 Cryenco T/A Nitrogen

Bulk Trailer Operating Temp -320*F Design Temp, Water Weight Capacity 62,839 LBS, Tank S/N J1468, Mtd On T/A Trailer Chassis, GVWR 69,000 LBS, GAWR 20,000 LBS Ea, Manual Jacks, Ext Cooling Fins, Rear Mtd Plumbing, Controls, & Gauge Cluster, 275/80R22.5 Tires w/Alloy Wheels, Seller Asset 8503, VIN 1C9J14689WJ452001. VIN/SN: 1C9J14689WJ452001 K#: K28547

1258 5 B 1976 Lox Equipment T/A

Nitrogen Bulk Trailer Operating Temp -320*F To +100*F, 38 PSIG MAWP, Ext Cooling Fins, Rear Mtd Plumbing, Controls, & Gauge Cluster, On T/A Trailer Chassis, Manual Jacks, 11R22.5 Tires w/Steel Wheels, Seller Asset 8501, VIN 7560. VIN/SN: 7560 K#: K28552

Choice of 4 - Lots 1259-1262 1259 4 B 2001 Pro Tech Cryogenic 7,500

Gal T/A Nitrogen Transport Trailer Operating Temp -320*F To +100*F, 46 PSI MAWP, Shell Thickness .135”, Head Thickness .188”, Shell S/N 37943A, Mtd On T/A Trailer Chassis, Manual Jacks, Ext Cooling Fins, Rear Mtd Plumbing, Controls, & Gauge Cluster, 11R22.5 Tires w/Alloy Wheels, Seller Asset 8504, VIN 2W9PRJE3T512013286. VIN/SN: 2W9RJE3T512013286 K#: K28568

1260 4 B 2005 Cryogenic Vessels T/A

Nitrogen Transport Trailer Operating Temp -320*F To +100*F, 81 PSI MAWP, Shell Thickness .188”, Head Thickness .226”, Gross Volumetric Capacity 28,360 Gallons, Shell S/N 76025, Mtd On T/A Trailer Chassis, GVWR 68,179 LBS, GAWR 25,000 LBS Ea, Manual Jacks, Ext Cooling Fins, Rear Mtd Plumbing, Controls, & Gauge Cluster, 295/75R22.5 Tires w/Alloy Wheels, Seller Asset 8506, VIN 1C9SC442X4M810084. VIN/SN: 1C9SC442X4M810084 K#: K28569

1261 4 B 1982 Alloy Crafts T/A Nitrogen

Transport Trailer Operating Temp -320*F To +100*F, Shell Thickness .105”, Head Thickness 3/16”, Shell M/N 20247, Mtd On T/A Trailer Chassis, GVWR 67,900 LBS, GAWR 20,000 LBS Ea, Manual Jacks, Ext Cooling Fins, Rear Mtd Plumbing, Controls, & Gauge Cluster, 11R22.5 Tires w/Alloy Wheels, VIN 12403. VIN/SN: 12403 K#: K28590




1262 4 B 1998 Cryenco T/A Nitrogen Transport Trailer Operating Temp -320*F, Water Capacity 49,225 LBS, Shell S/N J1467, Mtd On T/A Trailer Chassis, GVWR 69,000 LBS, GAWR 20,000 LBS Ea, Manual Jacks, Ext Cooling Fins, Rear Mtd Plumbing, Controls, & Gauge Cluster, 295/75R22.5 Tires w/Steel Wheels, Seller Asset 8507, VIN 1C9J1467XWJ452001. VIN/SN: 1C9J1467XWJ452001 K#: K28593

Choice of 3 - Lots 1263-1265 1263 5 B 2014 Peerless 4-Axle Coiled

Tubing Reel Trailer (NO CT REEL) 2013 NOV Hydra Rig Coil Tubing Spooler Arm, M/N DSR-3-2, Mtd 4’ x 4’ Climate Controlled Operators Cabin, Mtd Hyd Tank & Parker Hyd Motor p/b John Deere 4 Cyl Diesel Engine, S/N PE4045L245594, Ext Controls & Gauges, All Mtd On Quad Axle Trailer Chassis, M/N CH-54-4A, GVWR 163,142 LBS, GAWR 22,487 LBS Ea, Hyd Jacks, 11R22.5 Tires w/Alloy Wheels, Seller Asset 7805, VIN 2PLC05441EBC16729. VIN/SN: 2PLC05441EBC16729 K#: K28549

1264 5 B 2001 Sanjel Tri/A Coiled

Tubing Reel Trailer w/CT Reel Coil tubing Reel w/Drive Assy, Spooler Arm, Guide Arm, & Partial Wrapping Of 1-3/4”OD Tubing, Mtd Hyd Tank & Hyd Motor p/b John Deere 4 Cyl Diesel Engine, S/N PE4045D325064, 676 Metered Hours, Ext Controls & Gauges, All Mtd On Tri/A Trailer Chassis M/N 8975, GVWR 67,501 LBS, GAWR 22,500 LBS Ea, Manual Jacks, 11R24.5 Tires w/Alloy Wheels, Seller Asset 7701, VIN 2H9TD3EZ21C070127. VIN/SN: 2H9TD3EZ21C070127 K#: K28550

1265 5 B 2013 Peerless 4-Axle Coil Tubing Reel Trailer (NO CT REEL) M/N CH-49-4A, GVWR 144,488 LBS, GAWR 22,487 LBS Ea, Manual Jacks, 13’2”L Front Deck, 12’3”L x 7’4”W Coil Tubing Basin, 19’L Rear Deck, OAL 45’, 275/70R22.5 Tires w/Alloy Wheels, Seller Asset 5504, VIN 2PLC04948DBF16320. VIN/SN: 2PLC04948DBF16320 K#: K28546

Choice of 2 - Lots 1266-1267 1266 5 B 2007 Peerless Tri/A Coiled

Tubing Reel Trailer (NO TUBING) 2013 NOV Hydra Rig Coil Tubing Reel, M/N 3CB4000174, S/N HRC06CS39713R, Seller Asset R8-N, Mtd 5’ x 5’ Operators Cabin, All Mtd On Tri/A Trailer Chassis, M/N CH-50-3A, GVWR 99,825 LBS, GAWR 22,553 LBS Ea, Manual Jacks, 11R22.5 Tires w/Alloy Wheels, Seller Asset 7802, VIN 2PLC050387BD12812. VIN/SN: 2PLC050387BD12812 K#: K28548

1267 5 B 2002 Aspen Tri/A Coiled

Tubing Reel Trailer 2017 NOV Hydra Rig DID Coil Tubing Reel, 172x88x72 ASM, S/N 105089-000-1, Seller Asset R8-Q, Mtd 5’ x 5’ Operators Cabin, All Mtd On Tri/A Trailer Chassis, GVWR 118,152 LBS, M/N 0F50-3, Manual Jacks, 11R24.5 Tires w/Alloy Wheels, Seller Asset 7801, VIN 2A9PF50382N125191. VIN/SN: 2A9PF50382N125191 K#: K28535




Choice of 3 - Lots 1268-1270 1268 4 B 2015 Peerless 4-Axle Coiled

Tubing Reel Trailer w/3-Axle Jeep & T/A Booster Stimline Coil Tubing Reel Base w/Hyd Motor, Drive Assy, Spooler Arm, & 2-3/8”OD Tubing, Seller Asset CR440068, Cummins 7.5kW Diesel Generator, M/N 7.5 HDKAT-419348, S/N I190634390, 2,730 Metered Hours, Mtd 72 Gallon Fuel Tank, 8’ x 5’3” Climate Controlled Operator Cabin w/Control Panel, Injector Head Base Mount, All Mtd On Quad Axle Trailer Chassis, M/N CH-64-4A, GVWR 178,574 LBS, GAWR 22,487 LBS Ea, Hyd Jacks, 275/70R22.5 Tires w/Alloy Wheels, Seller Asset 7806, VIN 2PLC06445FBB17516, 2015 Peerless T/A Booster Trailer, M/N TAT-20-C-2ASS, GVWR 44,974 LBS, GAWR 22,487 LBS Ea, Manual Jacks, 275/70R22.5 Tires w/Alloy Wheels, Seller Asset 7909, VIN 2PLH01525GBD17514, 2015 Peerless Tri/A Jeep Trailer, M/N JP-55-R-3A, GVWR 122,136 LBS, GAWR 20,282 LBS Ea, Manual Jacks, Sliding Fifth Wheel Plate, 255/70R22.5 Tires w/Alloy Wheels, Seller Asset 7952, VIN 2PLH03636GBE17513. VIN/SN: 2PLC06445FBB17516 K#: K28577

1269 4 B 2015 Peerless 3-Axle Coiled Tubing Reel Trailer w/Peerless T/A Booster Trailer (Missing CT Reel & Injector) Stimline Coil Tubing Reel Base w/Hyd Motor & Spooler Arm, Injector Head Base Mount, 8’ x 5’3” Climate Controlled Operator Cabin w/Control Panel, Cummins 7.5kW Diesel Generator, M/N 7.5HDKAT-41934R, S/N L170287426, 6,495 Metered Hours, Mtd 50 Gallon Fuel Tank, All Mtd On Tri/A Trailer Chassis, M/N CH-53-3A, GVWR 169,535 LBS, GAWR 22,487 LBS Ea, Manual & Hyd Jacks, Rear Leveling Jacks, Fold Down Ladders, 315/80R22.5 Tires w/Alloy Wheels, Seller Asset 7808, VIN 2PLC05331FBE17167, 2014 Peerless T/A Booster Trailer, M/N TAT-20-C-2ASS, GVWR 44,974 LBS, GAWR 22,487 LBS Ea, Manual Jacks, 275/70R22.5 Tires w/Alloy Wheels, Seller Asset 7910, VIN 2PLH01522FBH17352. NO REEL OR TUBING. VIN/SN: 2PLC05331FBE17167 K#: K28575




1270 4 B 2014 Peerless 3-Axle Coiled Tubing Reel Trailer w/T/A Booster Trailer Stimline Coil Tubing Reel Base Seller Asset RB-28, w/Hyd Motor & Spooler Arm, Seller Asset OSR-18, Injector Head Base Mount, 8’ x 5’3” Climate Controlled Operator Cabin w/Control Panel, Cummins 10kW Diesel Generator, M/N 10HDKCC-42345H, S/N D190546533, 1,420 Metered Hours, Mtd 50 Gallon Fuel Tank, All Mtd On Tri/A Trailer Chassis, M/N CH-53-3A, GVWR 169,535 LBS, GAWR 22,487 LBS Ea, Hyd Jacks, Rear Leveling Jacks, Fold Down Ladders, 315/80R22.5 Tires w/Alloy Wheels, Seller Asset 7807, VIN 2PLC0533XFBE17166, 2014 Peerless T/A Booster Trailer, M/N TAT-20-2ASS, GVWR 44,974 LBS, GAWR 22,487 LBS Ea, Manual Jacks, 275/70R22.5 Tires w/Alloy Wheels, Seller Asset 17437, VIN 2PLH01528FBL17437. NO TUBING ON REEL. VIN/SN: 2PLC0533XFBE17166 K#: K28576

Choice of 3 - Lots 1271-1273 1271 4 B 2012 NOV Hydra Rig 4-Axle

Coiled Tubing Reel Trailer w/2”OD Tubing NOV Hydra Rig Coil Tubing Reel, Drive Assy, Hyd Motor, Spooler Arm, & 2”OD Tubing, Seller Asset R-38, Injector Head Base Mount, Hose Reel w/Hyd Hose, 4’ x 4’ Operator Cabin, All Mtd on 2012 Peerless 4-Axle Trailer Chassis, M/N CH-54-4A, GVWR 165,346 LBS, GAWR 22,487 LBS Ea, Manual Jacks, Fold Down Ladders, 11R22.5 Tires w/Alloy Wheels, Seller Asset 7804, VIN 2PLC05445CBK15707, Full Unit S/N HRC11CS85011 TRL. VIN/SN: 2PLC05445CBK15707 K#: K28574

1272 4 B 2007 Specialized 3-Axle Coiled Tubing Reel Trailer w/Reel & 2”OD Tubing 2009 NOV Hydra Rig Coil Tubing Reel, M/N 3CB404470, S/N HRC016602309R-1, w/Drive Assy, Hyd Motor, & 2”OD Tubing, Seller Asset R-29, Injector Head Base Mount, 5’ x 5’ Operator Cabin, All Mtd On Tri/A Trailer Chassis, Detachable Fifth Wheel, M/N XL80, GVWR 97,560 LBS, GAWR 20,280 LBS Ea, Manual Jacks, 255/70R22.5 Tires w/Alloy Wheels, Seller Asset 7703, VIN 4U3J050347L006605. VIN/SN: 4U3J050347L006605 K#: K28572

1273 4 B 2009 Peerless 3-Axle Coiled

Tubing Reel Trailer w/2”OD Tubing 2008 NOV Hydra Rig Coil Tubing Reel, M/N 3CB024357, S/N HRC-DID4000TR-67001, Seller Asset R8-C, w/Drive Assy, Hyd Motor, Spooler Arm, & 2”OD Tubing, 5’ x 5’ Operator Cabin, All Mtd On Tri/A Trailer Chassis, M/N CH-50-3A, GVWR 102,074 LBS, GAWR 22,487 LBS Ea, Manual Jacks, Fold Down Ladders, 11R22.5 Tires w/Alloy Wheels, Seller Asset 7803, VIN 2PLC050319BJ14184. VIN/SN: 2PLC050319BJ14184 K#: K28573




1274 4 B 2011 Trailking 47'L 4-Axle Extendable Step Deck Trailer INJECTOR SHOWN NOT INCL Trailer M/N TK100CD-843, GVWR 118,120 LBS, GAWR 20,280 LBS Ea, Manual Jacks, (2) Mtd JOBOX’s, 12’8”L Front Deck, 21’L Middle Deck, 13’6”L Rear Deck, 255/70R22.5 Tires w/Alloy Wheels, Seller Asset 7706, VIN 1TKB04831BM033821, 4’5”L Fold Down S/A Extendable Deck, Seller Asset 7903, VIN Tag Illegible. DOES NOT INCLUDE INJECTOR HEAD. VIN/SN: 1TKB04831BM033821 K#: K28560

Choice of 3 - Lots 1275-1277 1275 4 B 2011 Stellar 4-Axle Coiled

Tubing Reel Trailer (NO REEL) Mtd Coil Tubing Reel Base w/Hyd Motor & Spooler Arm, (3) Mtd Hyd Powered Hose Reels, 8’ x 8’ Operator Cabin, Assorted Components Shown, All Mtd On Quad Axle Trailer Chassis, GVWR 100,208 LBS, GAWR 25,000 LBS Ea, Hyd Jacks, Rear Hyd Leveling Jacks, 275/70R22.5 Tires w/Alloy Wheels, Seller Asset 7016, VIN 2N9CT5041BE065217. NO REEL OR TUBING. VIN/SN: 2N9CT5041BE065217 K#: K28594

1276 4 B 2012 Stellar 4-Axle Coiled

Tubing Reel Trailer (NO REEL) M/N Quad Cartridge Reel, GVWR 142,000 LBS, GAWR 25,000 LBS, Manual Jacks, 149”L x 105”W Reel Basin, 275/70R22.5 Tires w/Alloy Wheels, Seller Asset 5503, VIN 2N9CT5046BE065262. NO REEL OR TUBING. VIN/SN: 2N9CT5046BE065262 K#: K28571

1277 4 B 1997 Peerless 3-Axle Coiled Tubing Reel Trailer NOV Hydra Rig Coil Tubing Reel, Seller Asset R8-M, On Tri/A Trailer Chassis, GVWR 102,735 LBS, Manual Jacks, Coil Tubing Reel Base Mounts, 11R24.5 Tires w/Alloy Wheels, Seller Asset 7001, VIN 2H9TG3EZXVC070101. NO TUBING ON REEL. VIN/SN: 2H9TG3EZXVC070101 K#: K28570

1278 4 B 2008 Fontaine 48'L T/A Step

Deck Trailer M/N VDT-1-8048AWK, GVWR 74,685 LBS, GAWR 20,000 LBS Ea, Dual Manual Jacks, 10’L Front Deck, 38’L Rear Deck, OAL 48’, 255/70R22.5 Tires w/Alloy Wheels, Seller Asset 4603, VIN 13N24820681547817. DOES NOT INCLUDE STRIPPER PACKER UNITS SHOWN OR S/A BOOSTER TRAILER SHOWN. VIN/SN: 13N24820681547817 K#: K28566

1279 4 B 2015 Peerless T/A Jeep Trailer

M/N JP-40-R-MP-T-2A, GVWR 87,854 LBS, GAWR 22,487 LBS Ea, Manual Jacks, Sliding Fifth Wheel Plate, 275/70R22.5 Tires w/Alloy Wheels, Seller Asset 7953, VIN 2PLH02823FBM17480. VIN/SN: 2PLH02823FBM17480 K#: K28561




1280 4 B 2012 Peerless SAT-10-LR-1ASS Booster Axle 2011 Peerless S/A Booster Trailer, M/N SAT-10-LR-1ASS, GVWR 22,487 LBS, Manual Jacks, 275/70R22.5 Tires w/Alloy Wheels, Seller Asset 7906, VIN 2PLH0121XCBM16171. VIN/SN: 2PLH0121XCBM16171 K#: K28147

1281 4 B 2011 NOV Hydra Rig HR680

Injector Head w/CT Guide 12,500 LB Max Transport Capacity, 95,000 LB Max Lift Eye Capacity, P/N CC302520, O/N 3903, (2) Fairfeld Torque Hub Drive Units p/b (2) Linde Hyd Motors, Stemco Rev Counter, Ext Gauges, Seller Asset I-810. VIN/SN: CC302520 K#: K28578

Choice of 4 - Lots 1282-1285 1282 5 B 2009 NOV Hydra Rig HR680

Injector Head (INOP) 12,500 LB Max Transport Capacity, 95,000 LB Max Lift Eye Capacity, P/N CC302272, O/N 302503, (2) Drive Units, Stemco Rev Counter, Ext Gauges, Ext Controls, All Mtd In Transport Cage, Seller Asset I-807. UNIT IS MISSING TUBING DRESSINGS AND CONTROLS ARE PARTIALLY DISASSEMBLED. VIN/SN: CC302272 K#: K28521

1283 5 B 2006 NOV Hydra Rig HR680 Injector Head (INOP) 12,500 LB Max Transport Capacity, 95,000 LB Max Lift Eye Capacity, P/N CC300838, O/N 302072, (2) Drive Units p/b (2) Linde Hyd Motors, Stemco Rev Counter, Ext Gauges. UNIT IS MISSING TUBING DRESSINGS AND CONTROLS. VIN/SN: CC300838 K#: K28523


Injector Head (INOP) 12,500 LB Max Transport Capacity, 95,000 LB Max Lift Eye Capacity, P/N CC300841, O/N 302075, (2) Drive Units p/b (2) Linde Hyd Motors, Ext Gauges, Ext Controls, All Mtd In Transport Cage, Seller Asset I-805. UNIT IS MISSING TUBING DRESSINGS. VIN/SN: CC300841 K#: K28522


Injector Head (INOP) 12,500 LB Max Transport Capacity, 95,000 LB Max Lift Eye Capacity, P/N CC300840, O/N 302074, (2) Rexroth Drive Units p/b (1) Eaton Hyd Motor & (1) Linde Hyd Motor, Stemco Rev Counter, Ext Gauges, All Mtd In Transport Cage, Seller Asset I-804. UNIT IS MISSING HYD CONTROLS AND TUBING DRESSINGS. VIN/SN: CC300840 K#: K28519




Choice of 3 - Lots 1286-1288 1286 5 B 2017 NOV Hydra Rig HR6100

Injector Head 15,000 LB Max Transport Capacity, 115,000 LB Max Lift Eye Capacity, P/N CC303759, O/N 303575, (2) Drive Units p/b (2) Eaton Hyd Motors, Stemco Rev Counter, Ext Gauges, Ext Controls, All Mtd In Transport Cage. VIN/SN: CC303759 K#: K28524


Injector Head (INOP) 15,000 LB Max Transport Capacity, 115,000 LB Max Lift Eye Capacity, P/N CC303307, O/N 303214, (2) Drive Units p/b (2) Hyd Motors, Ext Gauges. UNIT IS MISSING NECESSARY DRIVE COMPONENTS. VIN/SN: CC303307 K#: K28588


Injector Head (INOP) 15,000 LB Max Transport Capacity, 115,000 LB Max Lift Eye Capacity, P/N CC302569, O/N 302673, (1) Drive Unit p/b (1) Hyd Motor, Ext Gauges. UNIT IS MISSING NECESSARY DRIVE COMPONENTS. VIN/SN: CC302569 K#: K28587

1289 5 B (2) NOV Hydra Rig HR6100 Injector Head Frames w/Assorted Components (1) 2011, P/N CC302568, O/N 302672, 15,000 LB Max Transport Capacity, 115,000 LB Max Lift Eye Capacity, Has Gauge Cluster & Hyd Hose Connection Panel, Seller Asset 450094, (1) 2017, P/N CC303817, O/N 303641, 15,000 LB Max Transport Capacity, 115,000 LB Max Lift Eye Capacity, Has Hyd Hose Connection Panel. W/K28558 & K28559, (16) Pallets Of Coil Tubing Injector Head Rebuild Components , Pressure Cans, Filter Housing, Hyd Motors, Drive Gears, Drive Chains, Hyd Hose. VIN/SN: CC302568 & CC303817 K#: K28557

1290 4 B Coiled Tubing Injector

Replacement Parts (2) Pallets Of Leveling Jacks, (2) Injector Head Lifting Cages, (1) Injector Head Guide Arm, (1) 95,000 LB Pull Hyd Tilt Frame, (1) Pallet Of Injector Head Frame Guards, & (1) Pallet Of Assorted Injector Head Drive Components. K#: K28592

Choice of 2 - Lots 1291-1292 1291 4 B 2012 Surefire Coiled Tubing

Reel w/Base (NO TUBING) 183”OD x 92”W Reel, M/N 2400-0437, S/N SF-001411SA, Chain Ring, Drive Assy, & 1502 Flow Components, Seller Asset CR44072. NO TUBING ON REEL. VIN/SN: SF-001411SA K#: K28579




1292 4 B Stimline Coiled Tubing Reel w/Base (NO TUBING) 183”OD x 92”W Reel, M/N 4006029, S/N SL-1174-082014, Chain Ring, Drive Assy, & 1502 Flow Components, Seller Asset CR44072. NO TUBING ON REEL. VIN/SN: SL-1174-082014 K#: K28580


Spooler Base w/Coiled Tubing Reel (NO TUBING) M/N 2400-0431, S/N SF-001462, 16’L x 10’W, Seller Asset SR-3, w/2011 Sunfire Coil Tubing Reel, M/N 2400-0437, S/N SF-001410SB, w/2” 1502 Components, Chain Ring, Chain, & Drive Gear Assy, Seller Asset OSR-19. NO TUBING. VIN/SN: SF-001462 & SF-001410SB K#: K28543

1294 5 B 163” x 92” Coiled Tubing Reel

(NO TUBING) w/164” CT Reel Base Mtd Chain Ring, Mtd Drive Gear Assy, 2” 1502 Iron, Seller Asset SR-8. NO TUBING. K#: K28539

1295 5 B 172” x 72” Hydra Rig Coiled

Tubing Reel (NO TUBING) No Drive Components, Only CT Reel. NO TUBING. K#: K28540


Spooler Base M/N 2400-0515, S/N SF-001681, 15’L x 8’6”W, w/Spooler Arm, Hyd Hose, Hyd Connections, Spooler Controls, & Pressure Gauge Cluster, Seller Asset SB-22. VIN/SN: SF-001681 K#: K28542

1297 5 B 2011 Surefire Coiled Tubing

Spooler Base M/N 2400-0441, S/N SF-001408R, 16’L x 10’W, w/Spooler Arm, Hyd Hose, & Hyd Connections, Seller Asset RB-24. VIN/SN: SF-001408R K#: K28541

1298 5 B 2011 Surefire Coiled Tubing

Spooler Base M/N 2400-0441, S/N SF-001409R, 16’L x 10’W, w/Hyd Hose, Seller Asset RB-25. VIN/SN: SF-001409R K#: K28544

1299 5 B Surefire Coil Tubing Spooler

Base M/N 4001252, S/N SL-1137-122013, 16’L x 10’W, w/Hyd Hose, Seller Asset RB-27. VIN/SN: SL-1137-122013 K#: K28545




Choice of 3 - Lots 1300-1302 1300 5 B 2011 Big Tex Crane Works T/A

B/P BOP Control Trailer GVWR 30,000 LBS, Safety Chains, Pintle Hook, Air Brakes, Single Manual Jack, Dual Pump 15K BOP + 10K Tool Hyd Controls, Mtd Glycol & Antifreeze Tanks, (2) Hose Reels w/Hose, 22’L x 8’6”W Deck, OAL 29’, 215/75R17.5 Tires w/Alloy Wheels + Full Size Spare, Comes w/Iron Storage Rack, (4) 10’L x 4-1/16” ID 10K Risers, & (2) 7-1/16” To 4-1/16” Reducer Spools, Seller Asset 4605, VIN 16VHX222182783124. UNIT HAS FLAT FRONT DRIVER TIRE, WILL NEED AIR OR REPLACEMENT PRIOR TO MOVE. VIN/SN: 16VHX222182783124 K#: K28529

1301 5 B 2011 Crane Works T/A BOP

Control Trailer GVWR 25,000 LBS, Safety Chains, Pintle Hook, Air Brakes, Single Manual Jack, Dual Pump 15K BOP + 10K Tool Hyd Controls, Mtd Glycol & Antifreeze Tanks, (2) Hose Reels w/Hose, 22’L x 8’6”W Deck, OAL 29’, 215/75R17.5 Tires w/Alloy Wheels, Seller Asset 4603, VIN 16VHX2225B2783126. VIN/SN: 16VHX2225B2783126 K#: K28533

1302 5 B 2011 Big Tex T/A BOP Control Trailer GVWR 30,000 LBS, GAWR 12,000 LBS Ea, Safety Chains, Pintle Hook, Air Brakes, Single Manual Jack, Dual Pump 15K BOP + 10K Tool Hyd Controls, Mtd Glycol & Antifreeze Tanks, (1) Hose Reel w/Hose, 22’L x 8’6”W Deck, OAL 29’, 215/75R17.5 Tires w/Alloy Wheels + Full Size Spare, Seller Asset 4606, VIN 16VHX222XB2783123. VIN/SN: 16VHX222XB2783123 K#: K28532

Choice of 2 - Lots 1303-1304 1303 5 B 2012 Crane Works T/A Trailer

GVWR 25,000 LBS, Safety Chains, Pintle Hook, Air Brakes, Single Manual Jack, 22’L x 8’6”W Deck, OAL 30’, Dual Rear Jacks, 215/75R17.5 Tires w/Alloy Wheels + Full Size Spare, Seller Asset 4601, VIN 16VHX222XC2720265. VIN/SN: 16VHX222XC2720265 K#: K28530

1304 5 B 2012 Crane Works T/A Trailer

GVWR 25,000 LBS, Safety Chains, Pintle Hook, Air Brakes, Single Manual Jack, 22’L x 8’6”W Deck, OAL 30’, Dual Rear Jacks, 215/75R17.5 Tires w/Alloy Wheels, Comes w/(1) 4-1/16” 15K Spool, Seller Asset 4602, VIN 16VHX2227C738237. VIN/SN: 16VHX2227C2738237 K#: K28531




1305 4 B 2006 Trailtech 18'L F/D T/A Utility Trailer w/Diesel HPU Caproni HPU, p/b Kubota Z482-ES 2 Cyl Diesel Engine, 2,077 Metered Hours, Mtd Fuel & Hyd Tanks, (3) Hose Reels w/Hose, (5) Pressure Bottles, All Mtd In 5’6”L x 3’10”W Transport Cage, All Mtd On T/A B/P Trailer, GVWR 13,800 LBS, GAWR 6,000 LBS Ea, Safety Chains, Manual Jack, 6’L x 1’4”W Toolbox, 18’L x 6’7”W Deck, OAL 24’, ST235/85R16 Tires w/Steel Wheels, (1) Full Size Spare, Seller Asset 4311, VIN 2CUL2TJ9662018998. VIN/SN: 2CUL2TJ9662018998 K#: K28562

Choice of 2 - Lots 1306-1307 1306 5 B Forum 4-1/16” 15K PSI Triple

Blowout Preventer 2” Tubing, H2S Service, Stud x Flange, BX-155 Flange, (1) 2” 1502 Port, S/N P11631. VIN/SN: P11631 K#: K28504

1307 5 B 2011 Forum 4-1/16” 15K PSI

Double Blowout Preventer 2” Tubing, H2S Service, Stud x Flange, BX-155 Flange, (1) 2” 1502 Port, S/N P11497. VIN/SN: P11497 K#: K28505

Choice of 7 - Lots 1308-1314 1308 5 B Lee Specialties 5-1/8” 10K PSI

Quad Blowout Preventer w/Lubricator Package 2-3/8” Tubing, H2S Service, Stud x Stud, S/N 1406-617, Seller Asset BL-501, w/(2) 10’L & (2) 9’L 10K Lubricator Riser Sections, (1) 10K Tee Spool, All On 7’ x 7’ Transport Skid. VIN/SN: 1406-617 K#: K28520

1309 5 B 2016 Nexus 5-1/8” 10K PSI

Quad Blowout Preventer Stud x Flange, w/10K Tee Spool, S/N 110416NX-01. VIN/SN: 110416NX-01 K#: K28509

1310 5 B 2010 Forum 4-1/16” 10K PSI

Quad Blowout Preventer 2” Tubing, H2S Service, Stud x Stud, BX-155 Flange, (1) 2” 1502 Port, w/BOP Stand, S/N P10357. VIN/SN: P10357 K#: K28515

1311 5 B 2010 Forum 4-1/16” 10K PSI

Quad Blowout Preventer 2” Tubing, H2S Service, Stud x Flange, BX-155 Flange, (1) 2” 1502 Port, w/BOP Stand, S/N P10150. VIN/SN: P10150 K#: K28511




1312 5 B Lee Specialties 4-1/16” 10K PSI Quad Blowout Preventer H2S Service, Stud x Flange, w/BOP Stand, S/N 1202-1978, Seller Asset BL-413. VIN/SN: 1202-1978 K#: K28517

1313 5 B Lee Specialties 3-1/16” 10K PSI

Quad Blowout Preventer (INOP) H2S Service, Stud x Stud, w/BOP Stand, S/N 0405-078. (1) RAM IS DISASSEMBLED. VIN/SN: 0405-078 K#: K28516

1314 5 B 2008 Parveen 3.06” 10K PSI

Quad Blowout Preventer Stud x Flange, BX-154 Flange, w/BOP Stand, S/N 61AD/08-01. VIN/SN: 61AD/08-01 K#: K28506

Choice of 5 - Lots 1315-1319 1315 4 B Lee Specialties 4-1/16” 10K PSI

Quad Blowout Preventer H2S Service, Stud x Flange, (1) 2” 1502 Port, S/N PM683UU0076, w/BOP Stand, Seller Asset BL-407. VIN/SN: PM683UU0076 K#: K28586


Quad Blowout Preventer H2S Service, Stud x Flange, (1) 2” 1502 Port, S/N 0812-107, w/BOP Stand, Seller Asset BL-402. VIN/SN: 0812-107 K#: K28583

1317 4 B Lee Specialties 4-1/16” 10K PSI Quad Blowout Preventer H2S Service, Stud x Flange, (1) 2” 1502 Port, S/N 1103-819, w/BOP Stand, Seller Asset BL-408. VIN/SN: 1103-819 K#: K28582


Quad Blowout Preventer H2S Service, Stud x Flange, (1) 2” 1502 Port, S/N 0804-531, w/BOP Stand, Seller Asset BL-409. VIN/SN: 0804-531 K#: K28584


Quad Blowout Preventer H2S Service, Stud x Flange, (1) 2” 1502 Port, S/N 1007-1499, w/(4) 10’L 10K Lubricator Riser Sections, All Mtd On 7’ x 7’ Transport Skid, Seller Asset BL411/BL407. VIN/SN: 1007-1499 K#: K28581


Quad Blowout Preventer 1-1/4” Tubing, H2S Service, Stud x Flange, (2) 2” 1502 Plug Valves, S/N 0807-146, w/BOP Stand, Seller Asset BL-303. VIN/SN: 0807-146 K#: K28565




Choice of 5 - Lots 1321-1325 1321 5 B 2012 Forum 5-1/8” 10K PSI

Triple Blowout Preventer 1-3/4” Tubing, H2S Service, Stud x Flange, BX-169 Flange, (1) 2” 1502 Port, w/10K Bleed 90* Spool Adapter, S/N P12553. VIN/SN: P12553 K#: K28510

1322 5 B 2012 Forum 5-1/8” 10K PSI

Triple Blowout Preventer w/Lubricator Package 2” Tubing, H2S Service, Stud x Flange, BX-169 Flange, S/N 12940, Spool Adapters, (4) 8’L & (1) 6’L 10K Lubricator Riser Sections, All On 7’ x 7’ Transport Skid. VIN/SN: 12940 K#: K28503

1323 5 B 2012 Forum 5-1/8” 10K PSI

Triple Blowout Preventer 1-3/4” Tubing, H2S Service, Stud x Flange, (1) 2” 1502 Port, S/N P12885. VIN/SN: P12885 K#: K28508

1324 5 B 2012 Forum 5-1/8” 10K PSI

Triple Blowout Preventer 2” Tubing, H2S Service, Stud x Flange, BX-169 Flange, w/10K Tee Spool & BOP Stand, S/N P12866. VIN/SN: P12866 K#: K28518

1325 5 B Forum 5-1/8” 10K PSI Triple Blowout Preventer Stud x Flange, w/10K Tee Spool, S/N 12498, Seller Asset BF-501. VIN/SN: 12498 K#: K28554

Choice of 4 - Lots 1326-1329 1326 5 B 2013 Forum 5-1/8” Double

Blowout Preventer (INOP) 1-3/4” Tubing, H2S Service, Stud x Flange, (1) 2” 1502 Port, w/BOP Stand, S/N P12898, Seller Asset BF-503. BOTTOM RAM CAP BOLTS ARE LOOSE. VIN/SN: P12898 K#: K28501

1327 5 B Forum 5-1/8” 10K PSI Double

Blowout Preventer (INOP) H2S Service, Stud x Stud, S/N 12124. UNIT DISASSEMBLED AND MISSING (1) RAM END. VIN/SN: 12124 K#: K28526

1328 5 B 2018 Lee Specialties 7-1/16”

5K PSI Double Blowout Preventer H2S Service, Stud x Stud, R-46 Flange, (2) 2” 1502 Ports, w/BOP Stand, S/N 0502-299B2. VIN/SN: 0502-299B2 K#: K28513




1329 4 B Lee Specialties 7” 5K PSI Double Blowout Preventer H2S Service, Stud x Stud, (2) 2” 1502 Port, S/N 0511-094, w/BOP Stand, Seller Asset BL-70. VIN/SN: 0511-094 K#: K28585

Choice of 5 - Lots 1330-1334 1330 5 B Texas Oil Tools 4-1/16” 10K

PSI Stripper Packer S/N M06686, Seller Asset 20069. VIN/SN: M06686 K#: K28507

1331 5 B Texas Oil Tools 4-1/16” 10K

PSI Stripper Packer 2” Line, S/N 081-26578, Seller Asset 20070. VIN/SN: 081-26578 K#: K28525

1332 5 B Coiled Tubing Stripper Packer

3.82” & 5.1” ID’s. K#: K28555

1333 5 B Coiled Tubing Stripper Packer

2.4” & 2.6” ID’s, S/N M06373. VIN/SN: M06373 K#: K28556

1334 4 B (5) Coiled Tubing Stripper

Packers (5) 4-1/16” Coil Tubing Stripper Packers, 2” Tubing, S/N’s M11390, M10402, 122-37366, M05026, & (1) Illegible. K#: K28145

Choice of 3 - Lots 1335-1337 1335 5 B 2” 1502 Iron Package

w/Transport Rack Lg Qty Of 10’L Joints, Plug Valves, Single Swivel Chicksans, Pup Joints, & 90* Elbows, All Stored On 12’L x 8’2”W x 6’H Storage Rack + 1’L Storage Compartment, Seller Asset 20324. K#: K28538

1336 4 B 10K Lubricator Package

w/Rack (5) 6’L & (1) 5’6”L Riser Sections, Chain Hoists, Ratchet Chain Binders, Werner Ladder, All On 8’L x 5’6”W A-Frame Transport Skid. K#: K28591

1337 4 B (9) 6’L 10K Lubricator Riser

Package w/(1) Storage Skid K#: K28567




2009 1500 HP SCR WALKING-DRILLING RIG (RIG 326)

1338 9 N 2009 1500HP SCR Walking-Drilling Rig Package (Rig 326) JN-1500 Drawworks p/b (2) GE 752’s w/ Eaton Airflex 336 WCB • JN 150’H 1,000,000# SHL Mast • 30’H Box on Box Sub • Lee C Moore (Woolslayer) 800T Walking System • DZ-500 (50T) BOP Handler • (3) CAT 3512C/Kato 1204KW Gensets • (1) Champion & (2) 50 DG PALATEK Screw Comprs • 1855-Bbl (3) Pit Mud System • (1) HHF-1600 & (1) JN F-1600 Triplex Mud Pumps Ea. p/b (2) GE 752’s • (2) Derrick FLC-504 Shakers • Charge Pump Skid • 140-Bbl Trip Tank • (2) 320-Bbl Water Tanks • 18,000-Gal Fuel Tank • TFI (6) Station Accumulator • 4-1/16” x 10M Choke Manifold • ZP275 RT • YC-450 Block • SL-450 Swivel • Dog Houses • Parts House • Handling Tools (The Following 3 Rig Components are Located in Rock Springs, WY: Tesco ECI-900 500T AC Top Drive • Omron 3x4 Digital SCR House • Walking System House) K#: K24929

1339 9 N 2009 JN-1500 1500 HP

Drawworks, R.Table, Block, Swivel, & Beckett (Rig 326) 2009 JN-1500 1500 HP Drawworks (S/N: JN06-JC500-02) Grooved F/ 1-3/8” Drill Line, P/B (2) Yonge 800 KW 750 HP Traction Motors S/N: N/A & N/A, Each W/ (1) 10 HP Blower, 2011 YS 50 Model 336WCB 50” Hydromatic Brake, (2) HYD Catheads, HYD Control Panel, All MTD on 10’W x 27’L Skid, Master Skidded, Stpetro ZP375 37-1/2” Rotary Table, S/N: 106-025, W/Set (2) Split Master Bushing, W/Chain Drive Assembly, Quingdao 500-Ton Travelling Block, S/N: 11003, W/ 500-Ton Raising Beckett K#: K24930

1340 9 N 2009 JN 150'H Mast, 30'H BxB Sub, Driller Cabin, Catwalk, & Suitcases (Rig 326) 2009 JN 150’H Cantilever Mast 1,000,000# SHL, W/ (6) Sheave Crown Block, W/ (1) 60” Fast Line Sheave, Grooved 1-3/8” Drill Line, Dead Line Anchor, Stand Pipe, Rotary Hose, 2006 30'H (6) Piece Box-On-Box Type Walking System Substructure, Lee C Moore (Woolslayer) 800T Walking System, W/Dog House Support Arms, Plumbed, Walkways, Spreader Beams, Rotary Beams, Stairs, Floor Spreader Beams, Misc HYD Hoses, Stairs, Walkways, Safety Rails, V-Door Ramp, Approx. 37’W x 30’H x 37’L Assembled Dimensions, All Skidded, Assorted Suitcases, Mast Stand, Racking board, Rig Lights, (2) 5-Ton Air Hoists, Wind Walls, Grayspin Mark 10 Pipe Spinner S/N: 1222BV, Double-Wide Top Dog House/ Drillers Cabin, 20’W x 32’L Flat Top, Crimped Steel, W/ (2) 4’L Covered Porch Extension, (4) Entrance Doors, Knowledge Box, Bench Storage, (6) Lockers, M.S.D.S. Box, (2) Dayton Heaters, Plumbing, Skidded, Five Star Wire Line Measuring Device & Skidded Frame, P/B HYD Motor, HYD Tank, Skidded W/Lifting Eyes, 8’W x 2’H x 20’ K#: K24931

1341 9 N Lee C. Moore Woolslayer 800T

Walking System & DZ-500 50T BOP Handler (Rig 326) (4) Walking Feet, (1) B.O.P. Handling Device K#: K24943




Choice of 3 - Lots 1342-1344 1342 9 N CAT 3512C/AA27673008 1204

KW Diesel Powered Genset (Rig 326) S/N: 18327-01, P/B Cat 3512C 1101 HP Diesel Engine S/N: LLA00351, W/Air Starter, 2006 Ace 150 PSI Heat Exchanger, Gauges, Control Panel, Exhaust Muffler, Rig Lighting, All MTD 12’W x 11’H x 42’L Covered Skid, Master Skidded (Hours Unverifiable) K#: K24933

1343 9 N CAT 3512C/AA27673008 1204


1344 9 N CAT 3512C/AA27673008 1204


1345 9 N Omron 3x4 Digital SCR House (Rig 326) 3x4 Panels, 10’W x 40’L W/ 12’L Covered Porch Extension, (10) Allen-Bradley Panels, Outdoor Electrical Receptacles, Fluorescent Lighting, (1) 1000 KVA Transformers, (2) Specific Systems 6-Ton A/C Units, (2) Entrance Doors, Skidded, W/Top Drive Control Panel K#: K24932

1346 9 N 2007 FB1600 1600 HP Triplex

Mud Pump (Rig 326) S/N: 07-C094, Forged Steel Fluid Ends W/Quick Change Caps, P/B (2) Amerimex 1000 HP Traction Motors, S/N: 750 & N/A, Each W/ (1) 10 HP Blower, Continental Emsco Type Pulsation Dampener, JA-3-11 3” Shear Relief Valve, National Oilwell 6,000# Mud Gauge, (1) 1-1/2” x 1-1/2” Rod Cooling Pump P/B 10 HP Electric Motor, Rig Lighting, All MTD In 12’W x 30’L Covered Skid, Master Skidded K#: K24937

1347 9 N 2006 HHF1600 1600 HP Triplex

Mud Pump (Rig 326) S/N: 06-159, Forged Steel Fluid Ends W/Quick Change Caps, P/B (2) Amerimex 1000 HP Traction Motors, S/N: N/A & N/A, Each W/ (1) 10 HP Blower, Continental Emsco Type Pulsation Dampener, JA-3-11 3” Shear Relief Valve, National Oilwell 6,000# Mud Gauge, (1) 1-1/2” x 1-1/2” Rod Cooling Pump P/B 10 HP Electric Motor, Rig Lighting, All MTD In 12’W x 30’L Covered Skid, Master Skidded K#: K24938




1348 9 N 1855-Bbl 3-Pit Mud System, Water Tanks, Fuel Tanks, Trip Tank, Shakers (Rig 326) 680-BBL Crimped Steel Mud Shaker Tank, Open Top, 10’W x 8’H x 48’L, 3- Compartment, (2) Mission 4” x 3” x 13” Cent Pumps Each P/B 75 HP Electric Motors, Folding Walkways, Plumbing, Drain, 560-BBL Crimped Steel Mud Suction Tank, Open Top, 10’W x 8’H x 40’L, 3-Compartment, W/ 8’L Covered Porch Extension, W/ (2) Cobra 8” x 6” x 14” Cent Pumps Each P/B 100 HP Electric Motors, Folding Walkways, Plumbing, Drain, Skidded, 450-BBL Crimped Steel Mud Tank, 8’W x 8’H x 40’L W/8’L Covered Porch Extension, W/(2) Mission 8” x 6” x 11” Cent Pumps, Each P/B 100 HP Electric Motors, Rig Lighting, Folding Walkways, Skidded, 10’W x 50’L Cent Pump House, Skidded (NOTE: Doors Welded Closed) 10’Dia x 30’L Round Fuel Tank, W/Enclosed Pump Room (Welded Closed) W/ Fuel Transfer Pumps, Steel Ladder, Skidded, 210-BBL Crimped Steel Water Tank, Open Top, 10’W x 8’H x 15’L, W/ 10’L Covered Porch Extension, W/ 16’L Covered Porch Extension, (1) Five Star 4” x 3” x 11” Cent Pumps Each P/B 30 HP Electric Motors, Stee K#: K24940

1349 9 N Sullivan Palatek Air

Compressor House (Rig 326) (2) Sullivan Palatek 50DG Air Compressors, Each P/B 50 HP Electric Motors, W/Air Volume Tanks, (1) Sullivan Palatek D-185 Air Compressor, P/B John Deere 4-Cylinder Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Rig Lighting, All MTD in 10’W x 11’H x 42’L Covered Skid, Skidded K#: K24936

1350 9 N Parts House, (2) Change Houses, & Pipe Racks (Rig 326) (1) Crimped Steel Parts House 8’W x 40’L, Tool/Parts Shelving, Work Benches, Bolt Bins, Rig Lights, Heater, Skidded, (1) Crimped Steel Change House, 8’W x 30’L (20) Lockers, Bench Storage, W/5’L Covered Porch Extension, Fluorescent Lighting, (2) Dayton Heaters, Skidded, (1) Crimped Steel Parts House, Tool/Parts Shelving, Bench Storage, Parts Bins, Fluorescent Lighting, Skidded, (13) 6-Sets of 42”H x 27’L Triangular Pipe Racks, Misc Air Heating Ducting K#: K24944

1351 9 N Charge House & (3) Suitcase

Houses (Rig 326) (2) Cobra 6” x 8” x 14” Cent Pumps Each P/B 50 HP Electric Motors, W/Mud Pump Plumbing, Heater, Rig Lights, All MTD in 8’W x 40’L Covered Skid, Skidded, W/(3) 8’W x 40’L Suitcase Houses/Hallways, W/ Rig Lighting (Used to Tie Rig Components Together) K#: K24939

1352 9 N (3) Junk Baskets, Camp

Transformer, & Misc Handling Tools (Rig 326) (1) 8’W x 3’H x 40’L Steel Junk Basket, Skidded W/Contents: Tongs, Pipes, Hoses, Change Over & Lift Subs, Elevator, Stairs, Safety Rails, Cable, & Misc, (1) 8’W x 3’H x 20’L Steel Junk Basket, Skidded, (1) 6’W x 3’H x 16’L Steel Junk Basket, Skidded, Dongan 480-Volt Camp Transformer, Skidded, W/Lift Frame K#: K24942




1353 9 N Koomey 6-St Accumulator/Choke Manifold House, (2) Cameron 11" 10K BOPs (Rig 326) Koomey Type 6-Station Accumulator Closing Unit, 10,000 PSI Working Pressure, Approx. 200-Gallon HYD Tank, (18) 11-Gallon Accumulator Bottles, Triplex Pump P/B 50 HP Electric Motor, (2) Air Pumps, 10’W x 50’L Crimped Steel House, W/Round Top, Fluorescent Lighting, Master Skidded, 4-1/16” x 10,000# Choke Manifold, W/ (2) 4-1/16” x 10,000# Gate Valves, (9) 2-1/16” x 10,000# Gate Valves, W/ (2) Assorted Drilling Blocks, MTD On Adjustable Height Skid, Rig Lighting, 10,000 Gauge, All MTD in 12’W x 30’L Crimped Steel House, W/ 15’L Porch Extension, Master Skidded, Cameron 11” x 10,000# DBL B.O.P. Flanged Top & Bottom, Cameron 11” x 10,000# Single B.O.P. Flanged Top & Bottom, 11” x 10,000# Drilling Spool W/(2) 4-1/16” x 10,000# Outlets, (4) 4-1/16” x 10,000# Gate Valves K#: K24941

1354 15 N Tesco ECI900 500-T Top Drive,

Power Module, Grasshopper House, & Track (Rig 326) Tesco ECI 900 500-Ton AC Electric Drive S/N:664, Skidded, 2008 Tesco Cathead/Brake HPU Power Unit, P/B 50 HP Electric Motor, 150-Gallon HYD Revisor, Model PM 900 HP, S/N: T-30048-008 MD 500 Drive, Electrical Panels, HYD Control Panel, 2008 Tesco Mechanical Module Model MM900HP, S/N: T-30048-009, HYD Cooling System, All MTD in 12’W x 40’L Crimped Steel House, Skidded, 10’W x 50’L Crimped Steel Grasshopper House, W/Top Drive Grasshopper Skid MTD on Top of House, Skidded, 2-Knuckle Folding Ground Grasshopper, Top Drive Loop MTD on 8’W 8’W x 3’H Skid, Skidded 8-Piece Top Drive Track, Set (2) 3” OD x 84”L Elevator Links K#: K24945

1500 HP SCR SKIDDING-DRILLING RIG (RIG 322)

1355 9 N 1500HP SCR Skidding-Drilling Rig Package (Rig 322) C.Emsco C-1 Type 11 Drawworks p/b (2) GE 752’s w/Parmac V-200 • Ideal 142’H 1,000,000# SHL Mast • 27’H Box on Box Sub • Lee C Moore (Woolslayer) 400T Skidding System • D2-500 (50T) BOP Handler • (3) CAT 3512C/Kato 1204KW Gensets • (1) Palatek & (2) G.Denver 50HP Screw Comprs • Omron GE Power Break 3x4 SCR House • (2) G.Denver PZ-11 Triplex Mud Pumps Ea. p/b (2) GE 752’s • 1050-Bbl (3) Pit Mud System • (2) Derrick Super G 503 Shakers • Charge Pump Skid • 120-Bbl Trip Tank • (2) 500-Bbl Water Tanks • Palatek D-185 Comprs • Emsco RA-52 500T Block • LB 500 500T Swivel • Oilwell 27-1/2” RT • 20,000-Gal Fuel Tank • 4-1/16” x 10M Choke Manifold • Cameron (7) Station Accumulator • Dog Houses • Parts House • Handling Tools K#: K29363

1356 9 N C.Emsco C-1 1500HP

Drawworks, 27.5" R.Table, & 500-T Block (Rig 322) C.Emsco C-1 1500 HP Drawworks (S/N: 23) Grooved F/ 1-3/8” Drill Line, P/B (2) GE 752 1000 HP Traction Motors S/N: 7362825 & 7525936, Each W/ (1) 10 HP Blower, Parmac V-200 48” Hydromatic Brake, (2) HYD Catheads, HYD Control Panel, All MTD on 10’W x 20’L Skid, Master Skidded, National Oilwell Type B 27-1/2” Rotary Table, W/ (1) Master Bushing, C.Emsco RA-52-6 500- Ton Travelling Block, S/N: 73, W/ (6) 48” Sheaves, Grooved F/1-3/8” Drill Line, & (1) 500-Ton Raising Beckett K#: K29364




1357 9 N Ideal 142'H 1,000,000# SHL Mast, 27'H Sub, Drillers Cabin, & Catwalk (Rig 322) Ideal 142’H 1,000,000# SHL Cantilever Mast, W/ (6) Sheave Crown Block, W/ (1) 60” Fast Line Sheave, Grooved 1-3/8” Drill Line, Dead Line Anchor, Mast Stand, Stand Pipe, Rig Lighting, Rotary Hose, REacking Board, A-Legs, Assorted Suitcases, (6) Piece Ideal 27’H Box-On-Box Type Substructure, W/Dog House Support Arms, Plumbed, Walkways, Spreader Beams, Rotary Beams, Stairs, Floor Spreader Beams, Misc HYD Hoses, Stairs, Walkways, Safety Rails, V-Door Ramp, Approx. 30’W x 27’H x 36’L Assembled Dimensions, All Skidded, Wind Walls, (1) 5,000# Air Hoist, (2) 8’W x 32’L Round Top Flat Steel Top Doghouse, W/ (1) 4’L Porch Extension, (2) Entrance Doors, Knowledge Box, Bench Storage, (6) Lockers, M.S.D.S. Box, (2) Heaters, Plumbing, Fluorescent Lighting, Tool/Parts Storage, Skidded, Shopbuilt Single-Section Slingshot Type Catwalk, 4’-6”W x 50’L x 42”H, Skidded K#: K29365

Choice of 3 - Lots 1358-1360 1358 9 N 2006 CAT 3512C/AA27673008

1204 KW Diesel Powered Genset (Rig 322) S/N: 18138-15, P/B Cat 3512C 1101 HP Diesel Engine S/N: LLA00173, W/Air Starter, 2006 Ace J96 Heat Exchanger, Gauges, Control Panel, Exhaust Muffler, W/5’L x 2’W x 6’H Steel Oil Container W/Pump, Hose & Hose Reel, All MTD 10’W x 11’H x 36’L Covered Skid, Master Skidded (Hours Unverifiable) K#: K29369

1359 9 N 2006 CAT 3512C/AA27673008 1204 KW Diesel Powered Genset (Rig 322) S/N: 18138-06, P/B Cat 3512C 1101 HP Diesel Engine S/N: LLA00172, W/Air Starter, 2006 Ace J96 Heat Exchanger, Gauges, Control Panel, Exhaust Muffler, W/5’L x 2’W x 6’H Steel Oil Container W/Pump, Hose & Hose Reel, All MTD 10’W x 11’H x 36’L Covered Skid, Master Skidded (Hours Unverifiable) K#: K29368

1360 9 N 2006 CAT 3512C/AA27673008

1204 KW Diesel Powered Genset (Rig 322) S/N: 18138-04, P/B Cat 3512C 1101 HP Diesel Engine S/N: LLA00186, W/Air Starter, 2006 Ace J96 Heat Exchanger, Gauges, Control Panel, Exhaust Muffler, All MTD 10’W x 11’H x 36’L Covered Skid, Master Skidded (Hours Unverifiable) K#: K29367

1361 9 N Omron GE Power Break 3x4

SCR House (Rig 322) 3x4 Panels, 10’W x 32’L W/ 10’L Covered Porch Extension, (8) GE 9000 Series Panels, Outdoor Electrical Receptacles, Fluorescent Lighting, (1) 480- Volt Transformers, (2) Ruud 5-Ton A/C Units, (2) Entrance Doors, Skidded K#: K29366




Choice of 2 - Lots 1362-1363 1362 9 N G.Denver PZ11 1600HP Triplex

Mud Pump (Rig 322) Forged Steel Fluid Ends W/Quick Change Caps, P/B (2) GE 752 1000 HP Traction Motors, Each W/ (1) 10 HP Blower, K-20 x 5,000# Type Pulsation Dampener, 3” Shear Relief Valve, 6,000# Mud Gauge, (1) 1” x 1-1/2” Rod Cooling Pump P/B 10HP Electric Motor, (1) Cobra 8” x 6” x 11” Cent Pump P/B 60 HP Electric Motor, Heater, Rig Lighting, All MTD In 12’W x 30’L Covered Skid, Master Skidded K#: K29371

1363 9 N G.Denver PZ-11 1600HP

Triplex Mud Pump (Rig 322) Forged Steel Fluid Ends W/Quick Change Caps, P/B (2) GE Model 752 1000 HP Traction Motors, Each W/ (1) 10 HP Blower, K-20 x 5,000# Type Pulsation Dampener, 3” Shear Relief Valve, 6,000# Mud Gauge, (1) Mission 1” x 1-1/2” Rod Cooling Pump P/B 10HP Electric Motor, (1) MCM 8” x 6” x 11” Cent Pump P/B 60 HP Electric Motor, Heater, Rig Lighting, All MTD In 12’W x 30’L Covered Skid, Master Skidded K#: K29372

1364 9 N 1050-Bbl 3-Pit Mud System, (2) Water Tanks, Fuel Tank & (2) Shakers (Rig 322) (1) 500-BBL Crimped Steel Mud Shaker Tank, W/Open Top, 10’W x 8’H x 38’L, 3- Compartment, W/ 11’L Pump House, Folding Walkways, Plumbing, Drain, Rig Lighting, (2) 10 HP Mud Agitators, Skidded (NOTE: Door Welded Shut) (1) 550-BBL Crimped Steel Mud Suction Tank, W/Open Top, 10’W x 8’H x 40’L, 3-Compartment, W/ 10’L Pump House, Folding Walkways, Plumbing, Drain, (2) 10 HP Mud Agitators, Skidded (NOTE: Door Welded Shut) (1) 10’W x 8’H x 38’L 425-BBL Flat Steel Open Top Mud Tank, W/7’L Pump House, Walkways, Skidded, 8’W x 8’ x 30’L Rectangular Steel Fuel Tank, W/ (1) 1” x 1” Transfer Pump P/B 5HP Electric Motor, Hoses, Nozzle, Steel Ladder, Skidded, 8’W x 28’L Flat Steel Mud House (NOTE: Doors Welded Shut) (1) 10’Dia. x 36’L Round Steel Water Tank W/ Steel Ladder, Plumbing, Drain, Skidded, (1) 10’Dia. x 36’L Round Steel Water Tank, W/5’L Pump House, W/ Steel Ladder, Plumbing, Drain, Skidded (NOTE: Door Welded Shut) (2) Derrick Model FLC-503 Shale Shakers Each P/B (2) Derrick Super G Motor K#: K29374




1365 9 N Koomey 5-St Accumulator, 10K Choke Manifold, (2) Cameron 11" 10K BOPs (Rig 322) Koomey 5- Station Accumulator Closing Unit, 10,000 PSI Working Pressure, Approx. 220-Gallon HYD Tank, (12) 11-Gallon Accumulator Bottles, Triplex Pump P/B 20 HP Electric Motor, (1) Air Pump, 12’W x 20’L Covered Skid, W/Round Top, Rig Lighting, Heater, Oil Tank W/Pump Hose & Hose Reel, Master Skidded, 4-1/16” x 10,000# Choke Manifold, W/ (2) 4-1/16” x 10,000# Gate Valves, (5) 2-1/16” x 10,000# Gate Valves, (1) 2-1/16” x 10,000# Needle Valve, W/ (3) Assorted Drilling Blocks, Heater, Parts Storage, Rig Lighting, MTD On Adjustable Height Skid, Master Skidded, (1) Cameron 11” x 10,000# DBL B.O.P. Flanged Top & Bottom, (1) Cameron 11” x 10,000# Single B.O.P. Flanged Top & Bottom, (1) 11” x 10,000# Drilling Spool W/(2) 4-1/16” x 10,000# Outlets, (2) 4-1/16” x 10,000# Gate Valves, (2) 2-1/16” x 5,000# Gate Valves, 60”Dia. X 20’H Vertical Degasser, Work Platform, Skidded K#: K29375

1366 9 N (1) Change House & (1) Parts

House (Rig 322) (1) 8’W x 40’L Change House, W/ (20) Lockers, Bench Storage, Tables, Parts/Bolt Bins, Fluorescent Lighting, Heater, Misc Rig Parts, Skidded (1) 8’W x 30’L Parts House, Bolt Bins, Parts Shelving, Heater, Rig Lighting, Misc Rig Parts, Skidded K#: K29377

1367 9 N Air Compressor House (Rig 322) (2) Gardner Denver Electra-Saving II Air Compressors, Each P/B 30 HP Electric Motors, W/Air Volume Tanks, (1) Sullivan Palatek 50DG Air Compressor, P/B 50 HP Electric Motor, Rig Lighting, W/48” Bug Blower, Tool Storage, Bolt Bins, Parts Shelving, Stairs, Misc Rig Parts, All MTD in 10’W x 9’H x 40’L Covered Skid, Skidded K#: K29370

1368 9 N Air Compressor Hallway (Rig

322) (1) Sullivan Palatek D-185 Air Compressor P/B John Deere 4-Cylinder Diesel Engine W/Electric Start, Radiator, Gauges, Skidded, All MTD in 6’W x 30’L Steel Covered Skid, Skidded K#: K29373

1369 9 N (2) Junk Baskets, (6)

Triangular Pipe Racks (Rig 322) (1) 8’W x 4’H x 36’L Steel Junk Basket, Skidded W/Contents, Mud Buckets, Elevator, Tongs, Wireline Measuring Device, Pipes & Misc Rig Parts, (1) 8’W x 4’H x 36’L Steel Junk Basket, Skidded W/Contents: W/Drill Line Spool W/1-3/8” Drill Line, (2) 4’W x 4’L x 4’H Steel Baskets, (3) Sets (6) 18”H x 27’L Triangular Pipe Racks K#: K29376




1500 HP SCR SKIDDING-DRILLING RIG (RIG 323)

1370 9 N 1500HP SCR Skidding-Drilling Rig Package (Rig 323) C.Emsco C-1 Type-11 Drawworks p/b (2) GE 752’s w/Parmac V-200 • Lee C Moore 142’H 1,000,000# SHL Mast • 25’H Box on Box Sub • Lee C Moore (Woolslayer) 400T Skidding System • DZ-500 (50T) BOP Handler • Omron IDM 3x4 Digital SCR House • (2) Emsco FB-1600 Triplex Mud Pumps Ea. p/b (2) GE 752’s • Charge Pump Skid• 1400-Bbl (3) Pit Mud System • (2) 500-Bbl Water Tanks • 120-Bbl Trip Tank • National 27-1/2” RT • Emsco RA-52 500T Block • National P-400 Swivel • 4-1/16” x 10M Choke Manifold • (2) Swaco Mongoose PT Shakers • 18,000-Gal Fuel Tank • Dog Houses • Parts House • Handling Tools • Koomey (6) Station Accumulator K#: K29351

1371 9 N C.Emsco C-1 1500HP

Drawworks, 27.5" RT, 500-T Block, & 450-T Swivel (Rig 323) Continental Emsco C-1 1500 HP Drawworks, Grooved F/ 1-3/8” Drill Line, P/B (2) Amerimex Series A 1000 HP Traction Motors S/N: 93930-4 & 93930-3, Each W/ (1) 10 HP Blower, Parmac V-200 50” Hydromatic Brake S/N: 49768, (2) HYD Catheads, HYD Control Panel, All MTD on 12’W x 28’L Skid, Master Skidded, National Oilwell 27-1/2” Rotary Table, W/ (1) Master Bushing, Continental Emsco RA-52 500-Ton Travelling Block S/N: 63, W/ (6) 48” Sheaves, Grooved F/1-3/8” Drill Line, SL450 450-Ton Swivel, S/N: HT20072004 K#: K29352

1372 9 N Lee C Moore 142'H Mast, 25'H BxB Sub, (2) Doghouses, Catwalk (Rig 323) Lee C. Moore 142’H Cantilever Mast, 1,000,000# SHL, W/ (7) Sheave Crown Block, W/ (1) 60” Fast Line Sheave, Grooved 1-3/8” Drill Line, Dead Line Anchor, Stand Pipe, Mast Stand, (6) Piece Box-On-Box Type Substructure, W/Dog House Support Arms, Plumbed, Walkways, Spreader Beams, Rotary Beams, Stairs, Floor Spreader Beams, Misc HYD Hoses, Stairs, Walkways, Safety Rails, V-Door Ramp, Swivel Stand, Wind Walls, Assorted Rig Mats, Ground Skids, Racking Board, A-Legs, Rig Lighting, Approx. 35’W x 25’H x 35’L Assembled Dimensions, All Skidded, Driller's Cabin, Off-Driller's Side Dog House (Ea. 10’W x 32’L) Ea W/ (2) 4’L Covered Porch Extension, (2) Entrance Doors, Knowledge Box, Bench Storage, (6) Lockers, M.S.D.S. Box, (4) Heaters, Plumbing, Skidded, W/ Five Star Wire Line Measuring Device, W/Lift Frame, P/B HYD Motor, HYD Tank, Tool Storage, Fluorescent Lighting, Remote Closing Unit, Skidded, Shopbuilt Single-Section Catwalk, 6’W x 50’L x 42”H Steel Deck, Skid K#: K29353

1373 9 N Omron IDM 3x4 Digital SCR

House (Rig 323) 3x4 Panels, 10’W x 30’L W/ 10’L Covered Porch Extension, (9) Allen-Bradley Panels, Outdoor Electrical Receptacles, Fluorescent Lighting, (1) 600- Volt Transformers, (1) 1000 KVA Transformer, (2) 6-Ton A/C Units, (2) Entrance Doors, Stairs, Skidded K#: K29354




Choice of 2 - Lots 1374-1375 1374 9 N 2011 Emsco FB-1600 Triplex

Mud Pump (Rig 323) S/N: 2011-02, Forged Steel Fluid Ends W/Quick Change Caps, P/B (2) Amerimex Series A 1000 HP Traction Motor, S/N: N/A & N/A, Each W/ (1) 10 HP Blower, Continental Emsco Pulsation Dampener, 6,000# Mud Gauge, (1) Mission 1” x 1-1/2” Rod Cooling Pump P/B 10 HP Electric Motor, Fluorescent Lighting, All MTD In 12’W x 32’L Covered Skid, Master Skidded K#: K29356

1375 9 N Emsco FB-1600 Triplex Mud

Pump (Rig 323) S/N: 400, Forged Steel Fluid Ends W/Quick Change Caps, P/B (2) Amerimex Series A 1000 HP Traction Motor, S/N: 7511018 & N/A, Each W/ (1) 10 HP Blower, Continental Emsco Pulsation Dampener, 6,000# Mud Gauge, (1) Mission 1” x 1-1/2” Rod Cooling Pump P/B 10 HP Electric Motor, Fluorescent Lighting, All MTD In 12’W x 32’L Covered Skid, Master Skidded K#: K29357

1376 9 N 1400-Bbl 3-Pit Mud System, (2) Water Tanks, Fuel Tank, & (2) Shakers (Rig 323) 700-BBL Flat Steel Mud Shaker Tank, Open Top, 10’W x 8’H x 50’L, 4- Compartment, Folding Walkways, Plumbing, Drain, (3) 10 HP Mud Agitators, Skidded, 550-BBL Flat Steel Mud Suction Tank, Open Top, 10’W x 8’H x 40’L, 3-Compartment, Folding Walkways, Plumbing, Drain, (3) 10 HP Mud Agitators, W/8’L Pump House Skidded, (NOTE: Door Welded Shut) 10’Dia (or ‘W) x 36’L Steel Fuel Tank, W/4’L Pump House, Hoses W/Nozzle & Filter, Steel Ladder, Skidded (NOTE: Door Welded Shut) 285-BBL Crimped Steel Water Tank, Open Top, 10’W x 8’H x 20’L, W/ 20’L House, (NOTE: Door Welded Shut on House) 500-BBL Crimped Steel Water Tank, Open Top, 10’W x8’H x 36’L, Steel Ladder, Plumbing, Drain, Top MTD Work Platform, Skidded, 10’W x 28’L Flat Steel Mud House (NOTE: Doors Welded Shut) (2) Mongoose Shale Shakers, Each P/B (3) Motors, Master Skidded W/Plumbing & Lift Frame K#: K29359

1377 9 N Drilling Compressor House

(Rig 323) (2) Sullivan Palatek 50DG Air Compressors, Each P/B 50 HP Electric Motors, W/Air Volume Tanks, (1) Quincy Rotary Air Compressor, P/B Lister 2-Cylinder Air Cooled Diesel Engine, W/Electric Start, Gauges, Exhaust Muffler, Rig Lighting, Tool Storage, Roof MTD Exhaust Fan, All MTD in 10’W x 10’H x 36’L Covered Skid, Skidded K#: K29355




1378 9 N Koomey 6-St Accumulator, 10K Choke Manifold, (2) Cameron BOPs & Handler(Rig 323) Koomey Type 6-Station Accumulator Closing Unit, 10,000 PSI Working Pressure, Approx. 200-Gallon HYD Tank, (15) 11-Gallon Accumulator Bottles, Triplex Pump P/B 25 HP Electric Motor, (2) Air Pumps, 10’W x 24’L Covered Skid, W/Round Top, Fluorescent Lighting, Heater, Assorted 2” S.S. Hoses, Master Skidded 4-1/16” x 10,000# Choke Manifold, W/ (2) 4-1/16” x 10,000# Gate Valves, (5) 2-1/16” x 10,000# Gate Valves, (1) 2-1/16” x 5,000# Gate Valves, W/ (2) Assorted Drilling Blocks, MTD On Adjustable Height Skid, All Inside 10’W x 20’L Room W/ 10’W x 8’H x 15’L 200-BBL Trip Tank, W/Approx. 5’L Pump House, Master Skidded (NOTE: Doors Welded Shut) Shopbuilt 60” Dia x 20’H Vertical Degasser, Skidded W/Lift Frame, (1) Cameron 11” x 10,000# DBL B.O.P. Flanged Top & Bottom, (1) Cameron 11” x 10,000# Single B.O.P. Flanged Top & Bottom, (1) 11” x 10,000# Drilling Spool W/ (2) 4-1/16” x 10,000# Outlets, (1) 4-1/16” x 10,000# Gate Valve, (1) 4-1/16” x 10,000 Needle Valve, & DZ-500 500-Ton B.O.P. Handling K#: K29360

1379 9 N Charge Pump House (Rig 323)

(2) Cobra 8” x 6” x 14” Cent Pumps Each P/B 75 HP Electric Motors, W/Mud Pump Plumbing, Heater, Rig Lights, All MTD in 10’W x 30’L Covered Skid, Skidded, W/(1) 8’W x 32’L Hallway House, W/Rig Lighting (Used to Tie Rig Components Together) K#: K29358

1380 9 N (1) Parts/Change House, (1) Parts House, & (4) Triangular Pipe Racks (Rig 323) 8’W x 40 ’L Parts/Change House Combo, W/5’L Covered Porch Extension, W/ (20) Lockers, Bench Storage, Tables, Parts/Bolt Bins, Fluorescent Lighting, Heater Skidded, (1) 8’W x 30’L Flat Steel Parts House, W/Heater, Vise, Work Bench, Tool Storage, Parts Bins, Fluorescent Lighting, Skidded, (2) Set (4) 42”H x 27’L Triangular Pipe Racks K#: K29362

1381 9 N (5) Junk Baskets, Camp

Transformer, & Handling Tools (Rig 323) (1) 8’W x 3’H x 32’L Steel Junk Basket, Skidded W/Heaters, Bug Blower, 50 HP Cent Pump, (1) 8’W x 3’H x 32’L Steel Junk Basket, Skidded W/Tongs, Lift & Change Over Subs, Misc Rig Equipment, (1) 8’W x 2’H x 32’L Steel Junk Basket, Skidded W/Misc Pipe, Weld-On Fittings & Misc Rig Parts, (2) 2’W x 3’H x 5’L Steel Junk Baskets, W/(2) Bit Breakers, (3) 480-Volt Panel Camp Transformer, All MTD on 3’W x 10’L Covered Skid W/Round Roof K#: K29361




NATIONAL OILWELL 1500 HP SCR DRILLING RIG (RIG 306)

1382 8 N National Oilwell 1500HP SCR Drilling Rig Package (Rig 306) National Oilwell 840-E 1400 HP S/D Drawworks, Parco 142’ H Cantilever Mast, Box on Box Substructure, Top Dog House/ Drillers Cabin, (3) MTU Model LS-661-06 1225 KW Powered Generator Skid, SCR House, 650-BBL Crimped Steel Mud Shaker Tank, 500-BBL Crimped Steel Mud Suction Tank, 110- BBL Flat Steel Trip Tank, (2) Derrick 4-Panel Hyperpool Shale Shaker Skid, Derrick 2-Cone Desilter W/Hopper, 16 - Cone Desander W/Hopper, Charge Skid, National Oilwell A27 Rotary Table, (2) Junk Baskets, (2) Parts Houses, National Oilwell P-500 500-Ton Swivel, National Oilwell 500-Ton Travelling Block, 10,000# Choke Manifold, 1982 Koomey Type 80 180-11S 6-Station Accumulator Closing Unit, Vertical Degasser, Five Star Wire Line Measuring Device & Skidded Frame, Line Washing Station, Rig Manager's House, Lubster, Man Baskets & Camp Transformer K#: K30259

1383 8 N National Oilwell 840-E 1400HP

Drawworks (Rig 306) (S/N: H38-104) Grooved F/ 1-3/8” Drill Line, Dretech Model 8350 50” Hydromatic Brake, (2) HYD Catheads, 1,000,000 # Weight Indicator, HYD Control Panel, All MTD on 10’W x 42’L Skid, Master Skidded, Drawworks Power Skid: QTY (2) AmerMex 1000 HP Traction Motors, W/Drive Assembly, Each W/ (1) 10 HP Blower, Skidded (2) Ingersoll-Rans 5,000# HYD Winches K#: K30261

1384 8 N Parco 142’H 1,250,000# SHL Cantilever Mast & Pyramid 30'H BxB Sub (Rig 306) (S/N: N/A) 1,250,000 # SHL, W/ (6) Sheave Crown Block, W/ (1) 42” Fast Line Sheave, Grooved 1-3/8” Drill Line, Dead Line Anchor, Stand Pipe, (4) Parco Piece Box-On-Box Type Substructure, W/Dog House Support Beams, Plumbed, Walkways, Spreader Beams, Rotary Beams, Floor Spreader Beams, Misc HYD Hoses, Stairs, Walkways, Safety Rails, V-Door Ramp, Approx 24’W x 20’H x 45’L Assembled Dimensions, All Skidded, Assorted Sized Suitcases W/Mis Hoses, Air Volume Tanks, Rig Lights, W/ 4’W x 4’H x 60’L Single-Section Steel Catwalk, Skidded, W/Stairs & Safety Rails K#: K30260

Choice of 3 - Lots 1385-1387 1385 8 N MTU 12V4000G73/1225KW

Diesel Powered Genset (Rig 306) Model LS-661-06, S/N: CG1L10500, P/B 2011 MTU 12V4000G73 1105HP Diesel Engine S/N: N/A, W/Air Starter, Ace Air Cooled Heat Exchanger, Gauges, Control Panel, Exhaust Muffler, (2) Sullivan Palatek Model 50DG Air Compressors, Each P/B 50 HP Electric Motors, Fluorescent Lighting W/ Air Volume Tank, All MTD 12’W x 54’L Covered Skid, Master Skidded (Hours Unverifiable) VIN/SN: CG1L10500 K#: K30263




1386 8 N MTU 12V4000G73/1225KW Diesel Powered Genset (Rig 306) Model LS-661-06, S/N: CG1L10436, P/B 2011 MTU 12V4000G73 1105HP Diesel Engine S/N: N/A, W/Air Starter, Ace Air Cooled Heat Exchanger, Gauges, Control Panel, Exhaust Muffler, Fluorescent Lighting, 6’H x 2’Deep x 4’W Tool/Storage Box, Roof MTD Exhaust Fan, All MTD 12’W x 54’L Covered Skid, Master Skidded (Hours Unverifiable) VIN/SN: CG1L10436 K#: K30265

1387 8 N MTU 12V4000G73/1225KW

Diesel Powered Genset (Rig 306) Model LS-661-06, S/N: CG1L10499, P/B 2011 MTU 12V4000G73 1105HP Diesel Engine S/N: N/A, W/Air Starter, Ace Air Cooled Heat Exchanger, Gauges, Control Panel, Exhaust Muffler, (1) Sullivan Palatek Model D185 Air Compressor, P/B 4-Cylinder Diesel Engine, S/N: N/A, (2) S.S. Toes W/ Transfer Pumps, Hoses, & Hose Reels, Fluorescent Lighting W/ Air Volume Tank, All MTD 12’W x 54’L Covered Skid, Master Skidded (Hours Unverifiable) VIN/SN: CG1L10499 K#: K30264

1388 8 N Ross Hill 1400 SCR House (Rig

306) 12’W x 40’L W/ 8’L Covered Porch Extension, Assorted Electrical Panels, , Outdoor Electrical Receptacles, Fluorescent Lighting, Transformers, (2) A/C Units, (2) Entrance Doors, Skidded (NOTE: Both Doors Welded Closed, & Could NOT Look Inside) K#: K30266

1389 8 N Driller's Side Doghouse (Rig 306) 9’W x 35’L Round Top, Flat Steel, W/ 4’L Porch Extension, (2) Entrance Doors, Totco 1,000,000 # Weight Indicator, Remote Closing Unit, Lockers, Knowledge Box, Bench Storage, (2)Heaters, Plumbing, Fluorescent & Rig Lights, Skidded K#: K30262

Choice of 2 - Lots 1390-1391 1390 8 N 500-BBL Crimped Steel Mud

Suction Tank (Rig 306) Open Top, 11’W x 8’H x 32’L, 3-Compartment, W/ 10’L Covered Porch Extension, W/ (4) Five Star 6” x 8” x 14” Cent Pumps Each P/B 60 HP Electric Motors, Folding Walkways, Plumbing, Drain, (4) 10 HP Mud Agitators, Skidded K#: K30268

1391 8 N 650-BBL Crimped Steel Mud

Shaker Tank (Rig 306) Open Top, 11’W x 8’H x 42’L, 4- Compartment, W/ 10’L Storage Room & Porch Extension, Folding Walkways, Ladder, Plumbing, Drain, (2) 10 HP Mud Agitators, Skidded K#: K30267

1392 8 N 110- BBL Flat Steel Trip Tank

(Rig 306) 8’W x 8’H x 10’L Flat Steel, Open Top, W/ 5’L Porch Extension, (1) Five Star 3” x 4” x 13” Cent Pumps each P/B 50 HP Electric Motor, Control Panel, Master Skidded K#: K30269




1393 8 N Crimped Steel Mud/Storage House (Rig 306) 9’W x 50’L House, Mud Hopper, Sink, Heater, Exhaust Fan, Rig & Fluorescent Lighting, Skidded K#: K30274

Choice of 2 - Lots 1394-1395 1394 8 N Derrick 2-Cone Desilter

W/Hopper (Rig 306) K#: K30271

1395 8 N (16) Cone Desander W/Hopper

(Rig 306) K#: K30272

Choice of 2 - Lots 1396-1397 1396 8 N 600-BBL Steel Water Tank (Rig

306) Open Top, 10’W x 8’H x 44’L, Steel Ladder, Plumbing, Drain, Skidded K#: K30276

1397 8 N 600-BBL Steel Water Tank (Rig

306) Open Top, 10’W x 8’H x 44’L, Steel Ladder, Plumbing, Drain, Skidded K#: K30275

1398 8 N Rig Managers House (Rig 306) 12’W x 50’L Rig Managers House, W/ (1) Office Area, Living Area, (1) Bedroom, (1) Bathroom, Kitchen, Sink, Stove, Refrigerator, Microwave, Heat & A/C Unit, Couch & Chair, Lights, Skidded K#: K30290

Choice of 3 - Lots 1399-1401 1399 8 N Parts/Change House Combo

(Rig 306) 8’W x 42’L Parts/Change House Combo, W/Lockers, Bench Storage, Tables, Parts/Bolt Bins, Heater, Fluorescent Lighting, Skidded K#: K30277

1400 8 N Parts House (Rig 306)

5’W x 10’L Flat Steel Parts/Change House Combo, W/Lockers, Bench Storage, Tables, Parts/Bolt Bins, Heater, Fluorescent Lighting, Skidded (NOTE: Door Welded Closed, Could Not See Inside) K#: K30281


8’W x 12’L Crimped Steel Parts/Change House Combo, W/Parts/Bolt Bins, Fluorescent Lighting, Assorted S.S. Hoses, Assorted Drive Chains, Skidded K#: K30282




1402 8 N 1982 Koomey Type 80 180-11S 6-Station Accumulator (Rig 306) 10,000 PSI Working Pressure, Approx. 200-Gallon HYD Tank, (18) 11-Gallon Accumulator Bottles, Triplex Pump P/B 20 HP Electric Motor, (2) Air Pumps, 8’W x 20’L Covered Skid, W/Flat Top, Fluorescent Lighting, Master Skidded K#: K30286

1403 8 N 10,000# Choke Manifold (Rig

306) 4-1/16” x 10,000# Choke Manifold, W/ (4) 4-1/16” x 10,000# Gate Valves, (2) 2-1/16” x 10,000# Gate Valves, W/ (2) Assorted Drilling Blocks, MTD On Adjustable Height Skid, W/Safety Rails, Master Skidded K#: K30285

1404 8 N National Oilwell 27.5" Rotary

Table (Rig 306) 27-1/2” Opening W/AmeriMex 1000 HP Traction Motor W/Chain Drive Assembly, All MTD to Main Beam F/Substructure K#: K30278

1405 8 N National Oilwell 500-Ton

Travelling Block(Rig 306) 27-1/2” Opening K#: K30284

1406 8 N National Oilwell P-500 500-Ton

Swivel (Rig 306) K#: K30283

1407 8 N Charge Pump Skid (Rig 306) QTY (2) Five Star 6” x 5” x 11” Cent Pumps Each P/B 50 HP Electric Motors, All MTD on 8’W x 42’L Skid, Skidded K#: K30273

1408 8 N Line Washing Station (Rig 306)

4’W x 4’L x 4’H Steel Tank, H-P Triplex Pump P/B 10 HP Electric Motor, W/Lift Frame K#: K30289

1409 8 N Lubester, Man Baskets &

Camp Transformer (Rig 306) 3’W x 3’H x 12’L 4-Compartment Lubester, Skidded, (3) Forklift Man Baskets, 480-Volt 3-Phase Transformer W/Roof & Lift Frame K#: K29331

1410 8 N Atmospheric Degasser (Rig

306) 60” Dia x 20’H Degasser, W/Ladder, All MTD On Adjustable Height Skid, Skidded K#: K30287

1411 8 N Five Star Wire Line Measuring

Device & Skidded Frame (Rig 306) P/B HYD Motor, HYD Tank, Skidded W/Lifting Eyes, W/.092 x 25,000’ of Wire K#: K30288




Choice of 2 - Lots 1412-1413 1412 8 N 40'L Junk Basket (Rig 306)

8’W x 3’H x 40’L Steel Junk Basket, Skidded W/Contents of Tongs, Mud Bucket, Pipe Spinner, Elevators, Pipe, Hoses & Misc Rig Equipment K#: K30280

1413 8 N 15'L Junk Basket (Rig 306)

8’W x 2’H x 15’L Steel Junk Basket, Skidded W/Contents of Assorted HYD Hoses K#: K30279

1700 HP SCR DRILLING RIG (RIG 308) 1414 10 N 1700HP SCR Drilling Rig

Package (Rig 308) Ideco E-1700 S/D Drawworks, 1982 Oilwell Industries 142’H 1,000,000# SHL Cantilever Mast, 6-Pc 30’H Box-On-Box Substructure, Continental Emsco Power Swivel w/Mast Stand, Ideco 275-K Rotary Table w/Split Master Bushing, Catwalk & V-Door, 500kN Travel Block, Elevator Links, 3-Tank Mud System, Mud Gas Separator, 1,000 BBL Water Tank System, 500 BBL Fuel Tank, IR Air Winch, YP Air Winch, Rig Mats, Suitcase Skids, Driller Side Dog House, Parts Houses, Change Houses, Rig Managers House, Bunk House, SCR House, Assorted Tools & Subs. K#: K28077

1415 1 N Ideco E-1700 S/D Drawworks (Rig 308) 1-3/8" Leebus Grooving, El Magco 3032W Water Cooled Brake, S/N RRJ 7898W, 12-1/2 Ton Anchor Block, Catheads 68-126, 68-87, Driller's Console w/ Omron Control Panel, Blancett Flowmeter & Pnuematic Controls, Master Skidded 23'L x 11'W, w/ Blank Porch Skid (No Motors) 21'L x 4'W. LOCATED AT SW 27TH ST. OKC. VIN/SN: 243 K#: K26450

1416 10 N 1982 Oilwell Industries 142’H

1,000,000# SHL Cantilever Mast (Rig 308) S/N 820904, Base Beam, Spreader Beam, 6-Sheave Crown Cluster, 50” OD, 1-Sheave Fast Line, 60” OD, 1-3/8” Line, Top Drive Tracks, Top Drive Carrier Frame, Racking Board, (2) 400 LB Max Load Personnel Baskets, w/Pipe Racks Shown. VIN/SN: 820904 K#: K28078

1417 10 N Oilwell 30'H (6)-Piece Box-On-

Box Substructure (Rig 308) Walled Units, Deadline Anchor, (2) Mtd Pressure Bottles, Stainless Steel Flex Line, All Stairs & Railings. K#: K28079

1418 10 N Omron 3x4 Digital SCR House

(Rig 308) Rear Electrical Connection Ports. K#: K28093




1419 10 N Driller's Side Doghouse (Rig 308) Remote Closing Unit, Work Benches, Storage Cabinets. K#: K28102

1420 10 N Change House (Rig 308)

w/Lockers & Rear Storage Room. K#: K28096

1421 10 N Crew House (Rig 308)

(2) Sleeping Quarters Rooms, (2) Shower/Bathroom Combo Rooms, Common Kitchenette/Dining Area. K#: K28094

1422 10 N Rig Managers House (Rig 308)

Climate Controlled, Ext Electrical Connections, Sleeping Quarters, Washroom, Kitchen/Dining Area, Office Area w/Workbench. K#: K28099

Choice of 4 - Lots 1423-1426 1423 10 N Parts House (Rig 308)

w/Pneumatic Pipe Spinner, Rig Lights, & Assorted Components Shown. K#: K28095


w/Misc Rig & Safety Components. K#: K28098

1425 10 N Parts House (Rig 308) w/Stainless Steel Flex Line. K#: K28101


w/Assorted Mud Pump Components. K#: K28100

Choice of 3 - Lots 1427-1429 1427 10 N 49'L Mud Suction Tank (Rig

308) 35’L x 10’11”W x 6’10”H Tank w/9’L Canopy, OAL 49’, (2) Derrick Equipment Mud Agitators & (2) Unk Manufacturer Mud Agitators, Ea p/b 10 HP Electric Motor, (4) Aplleton Control Panels, Electrical Cable Leads w/Appleton Connections, (2) MCM 250 Series 6x8x14 Centrifugal Pumps w/Manifold, Ea p/b Electric Motor, Seller Asset 810-904. K#: K28086

1428 10 N 51'L Mud Shaker Tank w/Built-

In 50-Bbl Premix Tank (Rig 308) 45’L x 10’11”W x 6’10”H Tank, OAL 51’, (1) Mud Agitator p/b Electric Motor, Railings, Flow Pipe, Fold Down Catwalk, Seller Asset 810-904. K#: K28087

1429 10 N 49'L Mud Volume Tank (Rig

308) 35’L x 10’11”W x 6’10”H Tank w/9’L Canopy, OAL 49’, (4) Mud Agitators, Ea p/b Electric Motor, (2) Five Star 6x8x14 Centrifugal Pumps w/Manifold, Ea p/b 100 HP Siemens & Baldor Electric Motor, Seller Asset 810-904. K#: K28088




1430 10 N 100-Bbl Trip Tank (Rig 308) Five Star 3x2x8 Centrifugal Pump, p/b 50 HP Siemens Electric Motor, Stairs w/Railings, Open Top w/Grating. K#: K28089

1431 10 N National Oilwell Desander &

Derrick Desilter (Rig 308) (3) Chamber Desander, M/N DSN-3V-10CTX, S/N H010002, (12) Chamber Desilter, M/N S-412-S, S/N 10770-01-00. K#: K28104

Choice of 3 - Lots 1432-1434 1432 10 N 32’L x 10’D Round Water Tank

(Rig 308) OAL 38’, w/Manifold, Seller Asset 2. K#: K28090

1433 10 N 32’L x 10’D Round Water Tank

(Rig 308) OAL 42’, (1) Five Star 5x4x14 Centrifugal Pump, p/b 50 HP GE Electric Motor, (1) MCM 250 Series 3x4x14 Centrifugal Pump, p/b 30 HP Siemens Electric motor, w/Manifold, Seller Asset 1. K#: K28091

1434 10 N 32’L x 10’6”D Round Fuel Tank

(Rig 308) OAL 42’, (3) Transfer Pumps, p/b (2) 1 HP Marathon Electric Motors & (1) 1/2 HP Baldor Electric Motor, w/Manifold, Hose, Fill Nozzle, & Mtd Pressure Tanks, Seller Asset 82-102. K#: K28092

1435 10 N Ideco 275-K Rotary Table w/Split MB (Rig 308) w/17’4”L x 12’5”W Base & Table Components Shown. K#: K28082

1436 10 N 550KN Traveling Block (Rig

308) 6-Sheave, 60” OD, 1-3/8” Line, Seller Asset 5-1-86. K#: K28084

1437 10 N C.Emsco Power Swivel w/Mast

Stand (Rig 308) S/N 135, w/Service Loop Basket (No Hose). K#: K28080

1438 10 N Koomey Type-80 8-Station

Closing Unit w/(2) Suitcase Skids (Rig 308) (22) Bottle, Mtd Pressure Bottle w/Pump, p/b 1-3/4 HP Baldor Electric Motor, Triplex Charge Pump, p/b 25 HP US Electric Motor, (1) 39’L x 4’5”W Hyd Hose Suitcase Skid, (1) 32’L x 3’6”W Flow Line Suitcase Skid. K#: K28107

1439 10 N 10’L x 4’D Atmospheric

Degasser (Rig 308) Adjustable Height Skid K#: K28106




1440 10 N (1) Charge Pump Skid & (1) 7,500 PSI Flow Control Skid w/(3) Rig Mats (Rig 308) 37’L x 8’W Rig Mats, (2) MCM 250 Series Centrifugal Pumps, S/N’s 42931 & 42570, Ea p/b Electric Motor, (2) Mission Pedestal 1x1.5C11 Pumps, Ea p/b 5 HP Siemens Electric Motor, All Mtd On 33’L x 10’W Skid, Seller Asset 39-308, (1) 23’L x 5’9”W 7,500 PSI Flow Control Skid w/(2) 3-1/2” ID Flex Lines, 4-1/16” Flanged Ends, (2) 2” Flow Control Valves, (2) 4” Flow Control Valves, (1) 15,000 PSI 2” 1502 Plug Valve w/10,000 PSI Flex Line. K#: K28083

1441 10 N (2) Manual Augers w/(2) Rig

Mats & Assorted Flow Line (Rig 308) (1) 37’L x 8’W Rig Mat, (2) 10’L x 8’W Rig Mats, Assorted Flow Lines Of Varying ID & Length. K#: K28109

1442 10 N 5-Compartment Lubester (Rig

308) 10’L x 4’W Tank. K#: K28108

1443 10 N 50'L Catwalk & 38'L V-Door

(Rig 308) 50’L x 5’W Catwalk On Cantilever Frame, 38’L x 4’8”W V-Door, Seller Asset 810-903. DOES NOT INCLUDE STAIRS OR TRAVEL BLOCK SHOWN IN PHOTO. K#: K28085

Choice of 5 - Lots 1444-1448 1444 10 N Junk Basket Skid w/IR Air

Winch, YP Air Winch, & Assorted Tools (Rig 308) IR Air Winch, 2018 Yantai Petroleum Machinery Air Winch, 22.8 HP, S/N 18008, Transformer w/Electrical Cable Leads, 10’L x 7’W Junk Basket w/Assorted Slips, Tools, Subs, All On 26’L x 7’W Skid. K#: K28097

1445 10 N 35’6”L Junk Basket & 500

Gallon Fuel Tank (Rig 308) OAL 41’, w/Grating, Dallas Tank Co 500 Gallon Fuel Tank, MAWP 200 PSI At 130*F, S/N P-8504. K#: K28112

1446 10 N 36’L Junk Basket w/Assorted

Rig Components (Rig 308) OAL 40’, w/Elevator Links, Assorted Walls & Walkways. K#: K28110

1447 10 N 27’L Junk Basket w/WL Survey

Unit & Tongs (Rig 308) OAL 32’, w/Survey Unit, Tongs, & Wind Walls. K#: K28114

1448 10 N 31’L Junk Basket w/Assorted

Rig Components (Rig 308) OAL 34’, w/Bug Blower, Subs, Power Swivel Flow Line, Access Oil Tool Rotating Mouse Hole, & Assorted Flow Line. K#: K28111




1449 10 N (4) Skidded Suitcases w/(6) Rig Mats (Rig 308) 37’L x 8’W Rig Mats, Suitcase Skids 35’L x 1’8”W, 18’L x 4’6”W, 10’L x 4’6”W, & 15’7”L x 6’3”W. DOES NOT INCLUDE STAIRS OR BEAMS SHOWN IN PICS. K#: K28081


(RIG 124) 1450 9 N 2012 1500HP SCR Skidding-

Drilling Rig Package (Rig 124) HH JC-50D Drawworks p/b (2) GE 752’s w/Eaton Airflex 336 WCB • HH 147’H 700,000# SHL Mast • 26’H Box on Box Sub • Unit 400T Skidding System • TFI DZ-500 (50T) BOP Handler • (2) HH F-1600 Triplex Mud Pumps Ea. p/b (2) GE 752’s • 1,000-Bbl (2) Pit Mud System • Low Pressure Charge Skid • (2) Derrick FLC-504 Shakers • Derrick De-sander/De-silter • (2) 400-Bbl Water Tanks • 120-Bbl Trip Tank • Emsco 27-1/2” RT • YC315 350T Block • 4-1/16” x 10M Choke Manifold • Dog Houses • Parts House • Handling Tools • TFI (6) Station Accumulator K#: K29378

1451 9 N HH HC-50D 1500HP Drawworks, 27.5" RT, 350-T Block & 500-T Swivel (Rig 124) HH JC-50D 1500 HP Drawworks (S/N: JC11-027) Grooved F/ 1-3/8” Drill Line, P/B (2) Yonge YZ08 1000 HP Traction Motors S/N: 108A100048 & 108100022, Each W/ (1) 10 HP Blower, Eaton Airflex 336 WCB 48” Hydromatic Brake, (2) HYD Catheads, HYD Control Panel, All MTD on 10’W x 20’L Skid, Master Skidded, Continental Emsco 27-1/2” Rotary Table S/N: 485, W/ (1) Master Bushing, Chain Drive Assembly, Ghoyou 350- Ton Travelling Block, S/N: H08-067, W/ (6) 50” Sheaves, Grooved F/1-3/8” Drill Line, & (1) 350-Ton Raising Beckett, SL 450 500-Ton Swivel K#: K29379

1452 9 N HH 147'H 700K Mast, 27'H BxB

Sub, Drillers Cabin, & Catwalk (Rig 124) HH 147’H Cantilever Mast, 700,000# SHL, W/ (6) Sheave Crown Block, W/ (1) 60” Fast Line Sheave, Grooved 1-3/8” Drill Line, Dead Line Anchor, Mast Stand, Stand Pipe, Rig Lighting, Rotary Hose, Racking Board, A-Legs, Assorted Suitcases, HH (6) Piece Ideal 27’H Box-On-Box Type Substructure, W/Dog House Support Arms, Plumbed, Walkways, Spreader Beams, Rotary Beams, Stairs, Floor Spreader Beams, Misc HYD Hoses, Stairs, Walkways, Safety Rails, V-Door Ramp, Approx. 30’W x 26’H x 35’L Assembled Dimensions, All Skidded, Wind Walls, (2) Double-Wide Each 10’W x 35’L Round Top Flat Steel Top Doghouses, Each W/ (1) 4’L Porch Extension, (2) Entrance Doors, Remote Closing Unit, Knowledge Box, Bench Storage, (6) Lockers, M.S.D.S. Box, (2) Heaters, Plumbing, Fluorescent Lighting, Tool/Parts Storage, Skidded, Shopbuilt Single-Section Slingshot Type Catwalk, 5’W x 50’L x 42”H, Skidded K#: K29380




Choice of 2 - Lots 1453-1454 1453 9 N 2012 HH F-1600 Triplex Mud

Pump (Rig 124) S/N: 09-101, Forged Steel Fluid Ends W/Quick Change Caps, P/B (2) Yonge Model YZ08 1000 HP Traction Motors, Each W/ (1) 10 HP Blower, Continental Emsco Pulsation Dampener, 3” Shear Relief Valve, Model 7 6,000# Mud Gauge, (1) Mission 1” x 1-1/2” Rod Cooling Pump P/B 10HP Electric Motor, Heater, Rig Lighting, Roof MTD Exhaust Fan, All MTD In 12’W x 30’L Covered Skid, Master Skidded K#: K29382

1454 9 N 2012 HH F-1600 Triplex Mud

Pump (Rig 124) S/N: 09-105, Forged Steel Fluid Ends W/Quick Change Caps, P/B (2) Yonge Model YZ08 1000 HP Traction Motors, Each W/ (1) 10 HP Blower, Continental Emsco Pulsation Dampener, 3” Shear Relief Valve, Type D 6,000# Mud Gauge, (1) Cobra 1” x 1-1/2” Rod Cooling Pump P/B 10HP Electric Motor, Heater, Rig Lighting, Roof MTD Exhaust Fan, All MTD In 12’W x 30’L Covered Skid, Master Skidded K#: K29381

1455 9 N 1000-Bbl 2-Pit Mud System, Water Tanks, Fuel Tanks, Mud House, Shakers (Rig 124) (1) 600-BBL Crimped Steel Mud Suction Tank, W/Open Top, 10’W x 8’H x 42’L, 3- Compartment, W/ 8’L Pump House, Folding Walkways, Plumbing, Drain, Rig Lighting, (2) 10 HP Mud Agitators, Skidded (NOTE: Door Welded Shut) (1) 550-BBL Crimped Steel Mud Shaker Tank, W/Open Top, 10’W x 8’H x 42’L, 3-Compartment, W/ 8’L Pump House, Folding Walkways, Plumbing, Drain, (2) 10 HP Mud Agitators, Skidded (NOTE: Door Welded Shut) 10’Dia. x 28’L Rectangular Steel Fuel Tank, W/5’L Pump House, Steel Ladder, Skidded (NOTE: Door Welded Shut) 10’W x 30’L Crimped Steel Mud House, W/ Mud Hopper, Heater, Benches, Eye Wash Station, Rig Lights, Fluorescent Lighting, Safety Rails, Skidded, (1) 10’W x 8’H x 33’L Steel Water Tank, W/12’L Porch Extension, (1) Five Star 4” x 3” x 14” Cent Pump P/B 20 HP Electric Motor, W/ Steel Ladder, Plumbing, Drain, Skidded, (1) 10’W x 8’H x 33’L Steel Water Tank, W/12’L Porch Extension, (2) Cobra 4” x 3” x 14” Cent Pumps Each P/B 20 HP Electric Motor, W/ Steel Ladder, Plumbing K#: K29384




1456 9 N 50'L Charge House & (4) Enclosed Rig Hallways (Rig 124) (2) Cobra 8” x 6” x 14” Cent Pumps Each P/B 75 HP Electric Motors, W/Mud Pump Plumbing, Heater, Rig Lights, (2) Heaters, All MTD in 10’W x 50’L Covered Skid, Skidded, W/(1) 8’W x 32’L Hallway House, W/Rig Lighting (Used to Tie Rig Components Together) (1) 12’W x 30’L Hallway W/480-Volt Transformer, Oil Tank W/Pump, Hose & Hose Reel, Skidded, (1) 8’W x 50’L Hallway W/Suitcases in Floor, Rig Lighting, Skidded (1) 8’W x 40’L Hallway W/Tool Storage, Rig Lighting, Skidded, (1) 8’W x 40’L Hallway/Parts House Combo, W/Parts Shelving, Rig Lighting, Suitcases in Floor, Skidded K#: K29383

1457 9 N 24'L Change House (Rig 124)

(1) 8’W x 24’L Change House, W/10’L Covered Porch Extension, W/(20) Lockers, Bench Storage, Tables, Parts/Bolt Bins, Fluorescent Lighting, Heater, Misc Rig Parts, Skidded K#: K29387

1458 9 N DS 7-St Accumulator, TFI DZ-

500 BOP Handler, & Degasser (Rig 124) DS 7- Station Accumulator Closing Unit, 10,000 PSI Working Pressure, Approx. 200-Gallon HYD Tank, (20) 11-Gallon Accumulator Bottles, Triplex Pump P/B 20 HP Electric Motor, (2) Air Pumps, 10’W x 22’L Covered Skid, W/Flat Top, Rig Lighting, Assorted 2” S.S. Hoses, Heater, Master Skidded, HYD B.O.P. Handling Device 60” Dia. X 20’H Vertical Degasser, Work Platform, Skidded K#: K29385

1459 9 N (2) Junk Baskets, (14) 27'L Triangular Pipe Racks (Rig 124) (1) 8’W x 3’H x 24’L Steel Junk Basket, Skidded W/Contents, Mud Buckets, Ducting, HYD Hoses, Elevator, Tongs, Wireline Measuring Device, Pipes & Misc Rig Parts, (1) 8’W x 3’H x 36’L Steel Junk Basket, Skidded W/Contents: Lift Subs, Drill Pipe Slips, Drill Collar Slips, Heater, Mud Bucket, Elevator, (2) Five Star 8” x 6” x 14” Cent Pumps Each P/B 50 HP Electric Motors, Drilling Blocks, Misc Pipe & HYD Hoses, Misc Rig Parts, (2) 4’W x 4’L x 4’H Steel Baskets, (7) Sets (14) 18”H x 27’L Triangular Pipe Racks K#: K29386

2011 1500 HP SKIDDING DRILLING RIG (RIG 116)

1460 9 N 2011 1500HP SCR Skidding-Drilling Rig Package (Rig 116) 150’H 1,000,000# SHL JN-1500 Mast • 25’H Box on Box Sub • Lee C Moore (400T) Skidding System • DZ-500 (50T) BOP Handler • (3) CAT 3512C/Kato 1204KW Gensets • (2) Palatek DG50 & (1) D185 Screw Comprs • Omron 3x4 Digital SCR House • (2) RSF-1600 Triplex Mud Pumps Ea. p/b (2) GE 752’s • 11x10M Single & Double BOPs • 1500-Bbl (3) Pit Mud System • Low Pressure Charge Skid • (2) 70-Bbl Water Tanks • Emsco LB-400 Swivel • 500T Block • 4-1/16” x 10M Choke • Dog Houses • Parts House • Handling Tools (Missing Drawworks) K#: K29388




1461 9 N QJ 150'H 700K Mast, 25'H BxB Sub, Drillers Cabin, & Catwalk (Rig 116) QJ 150’H 700,000# SHL Cantilever Mast, W/ (6) Sheave Crown Block, W/(1) 60” Fast Line Sheave, Grooved 1-3/8” Drill Line, Deadline Anchor, Stand Pipe, Mast Stand, Qindao Jieneng (6) Piece Box-On-Box Type Substructure, W/Dog House Support Arms, Plumbed, Walkways, Spreader Beams, Rotary Beams, Stairs, Floor Spreader Beams, Misc HYD Hoses, Stairs, Walkways, Safety Rails, V-Door Ramp, Approx. 36’W x 25’H x 37’L Assembled Dimensions, All Skidded, Drill Line Spool W/1-3/8” Drill Line, A-Legs, Wind Walls, Racking Board, Air Volume Tanks, Ground Skids, Set (2) AOT HT-100 Tongs, (2) Drillers Cabins (Double-Wide) Each 10’W x 36’L Flat Top, Crimped Steel, Each W/ 4’L Covered Porch Extension, (2) Entrance Doors, Knowledge Box, Bench Storage, (6) Lockers, M.S.D.S. Box, (3) Heaters, Plumbing, Misc Rig Parts, Fluorescent Lighting, Skidded, Shopbuilt Slingshot Type 60”W x 42”H x 50’L Single-Section Catwalk, Skidded K#: K29390

Choice of 3 - Lots 1462-1464 1462 9 N CAT 3512/AA27673008 1204

KW Diesel Powered Genset (Rig 116) S/N: 19440-02, P/B Cat 3512 1101 HP Diesel Engine S/N: LLA00788, W/Air Starter, Ace J96 Heat Exchanger, Gauges, Control Panel, Exhaust Muffler, Oil Tank W/Transfer Pump, Hose & Hose Reel, Tool Storage, Roof MTD Exhaust Fan, All MTD 10’W x 11’H x 36’L Covered Skid, Master Skidded (Hours Unverifiable) (NOTE: Lines Have Been Cut) K#: K29392

1463 9 N CAT 3512/AA27673008 1204 KW Diesel Powered Genset (Rig 116) S/N: 19440-03, P/B Cat 3512 1101 HP Diesel Engine S/N: LLA00786, W/Air Starter, Ace J96 Heat Exchanger, Gauges, Control Panel, Exhaust Muffler, (2) Sullivan Palatek 50DG Air Compressors, Each P/B 50 HP Electric Motors, W/Air Volume Tanks, Rig Lighting, Roof MTD Exhaust Fan, All MTD 10’W x 11’H x 36’L Covered Skid, Master Skidded (Hours Unverifiable) (NOTE: Lines Have Been Cut) K#: K29394

1464 9 N CAT 3512/AA27673008 1204

KW Diesel Powered Genset (Rig 116) S/N: 19440-05, P/B Cat 3512 1101 HP Diesel Engine S/N: LLA00987, W/Air Starter, Ace J96 Heat Exchanger, Gauges, Control Panel, Exhaust Muffler, Sullivan Palatek D-185 Air Compressor P/B John Deere 4-Cylinder Diesel Engine, W/Air Volume Tank, Rig Lighting, Roof MTD Exhaust Fan, All MTD 10’W x 11’H x 36’L Covered Skid, Master Skidded (Hours Unverifiable) (NOTE: Lines Have Been Cut) K#: K29393

1465 9 N Omron 3x4 Digital SCR House

(Rig 116) 3x4 Panels, 12’W x 40’L W/ 10’L Covered Porch Extension, (8) Allen-Bradley Panels, Outdoor Electrical Receptacles, Fluorescent Lighting, (1) 480- Volt Transformers, (2) Specific Systems 6-Ton A/C Units, (2) Entrance Doors, Skidded (NOTE: Lines Have Been Cut & Some Panels Disassembled) K#: K29391




Choice of 2 - Lots 1466-1467 1466 9 N 2006 RSF-1600 Triplex Mud

Pump (Rig 116) S/N: RSF-1600-14-021M, Forged Steel Fluid Ends W/Quick Change Caps, P/B (2) Yonge YZ08 1000 HP Traction Motor, Each W/ (1) 10 HP Blower, Continental Emsco Pulsation Dampener, 3” Shear Relief Valve, Type D 6,000# Mud Gauge, (1) Mission 1” x 1-1/2” Rod Cooling Pump P/B 10 HP Electric Motor, Fluorescent Lighting, All MTD In 12’W x 26’L Covered Skid, Master Skidded K#: K29395

1467 9 N 2004 ZYZJ ZYF-1600 Triplex

Mud Pump (Rig 116) S/N: 2006-01, Forged Steel Fluid Ends W/Quick Change Caps, P/B (2) Yonge YZ08 1000 HP Traction Motor, Each W/ (1) 10 HP Blower, Continental Emsco Pulsation Dampener, 3” Shear Relief Valve, Model 7 6,000# Mud Gauge, (1) Cobra 1” x 1-1/2” Rod Cooling Pump P/B 10 HP Electric Motor, Fluorescent Lighting, All MTD In 12’W x 26’L Covered Skid, Master Skidded K#: K29396

1468 9 N 1500-Bbl 3-Pit Mud System, (2) Water Tanks, Fuel Tank, Derrick Shakers (Rig 116) (1) 450-BBL Crimped Steel Mud Shaker Tank W/Open Top, 10’W x 8’H x 32’L, 3- Compartment, W/5’L Pump House, W/Folding Walkways, Skidded (NOTE: Doors Welded Shut) (1) 600-BBL Crimped Steel Mud Suction Tank W/Open Top, 10’W x 8’H x 45’L, 3-Compartment, W/8’L Pump House, W/Folding Walkways, Skidded (NOTE: Doors Welded Shut) (1) 10’Dia. x 32’L Round Steel Fuel Tank, W/5’L Pump House, Skidded, (1) 10’W x 8’H x 45’L Crimped Steel Mud Tank W/8’L Pump House, Folding Walkways, Plumbing, Drain, Skidded, (1) 425-BBL Crimped Steel Water Tank W/Open Top, 10’W x 8’H x 30’L, W/ 12’L Porch Extension, (1) Five Star 4” x 3” x 11” Cent Pumps P/B 30 HP Electric Motors, Steel Ladder, Plumbing, Drain, W/ (1) Fiver Star 48” Bug Blower, Rood MTD Exhaust Fan, Skidded, (1) 340-BBL Crimped Steel Water Tank W/Open Top, 10’W x 8’H x 24’L, W/ 14’L Covered Porch Extension, Steel Ladder, Plumbing, Drain, W/ (1) Oil Tank W/Pump Hose, & hose Reel, Rig Lighting, Skidded, (1) 170- BBL Trip Tank, 10’W x 8’H x 12’L Crimped K#: K29398




1469 9 N Charge Pump House & (4) Enclosed Rig Hallways (Rig 116) (2) Cobra 8” x 6” x 14” Cent Pumps Each P/B 75 HP Electric Motors, W/Mud Pump Plumbing, Heater, Rig Lights, All MTD in 10’W x 36’L Covered Skid, Skidded, W/ (4) Hallway Houses: (1) 12’W x 26’L Covered Skid Hallways Skid, W/Oil Tank, Transfer Pump, Hose & Hose Reel, Skidded, (1) 480-Volt Transformer, Roof MTD Exhaust Fan, Skidded, (1) 8’W x 40’L Suitcase Hallway House, Rig Lighting, Skidded, (2) 8’W x50’L Suitcase/Parts Hallway Houses, Parts Storage, Rig Lighting, Skidded K#: K29397

1470 9 N (1) 30'L Change House & (1)

30'L Parts House (Rig 116) (1) 8’W x 30 ’L Change House, W/4’L Covered Porch Extension, W/ (20) Lockers, Bench Storage, Fluorescent Lighting, Skidded, (1) 8’W x 30’L Parts House W/ Tool/Parts Shelving, Parts/Bolt Bins, Fluorescent Lighting, (2) Heaters, Weld-On Flanges, Hammer Unions, Ladder, Mini Fridge, Work Bench, Misc Rig Parts, Skidded K#: K29401

1471 9 N 7-St Accumulator, (2) Cameron 10K BOPs, Degasser (Rig 116) Beijing 6-Station Accumulator/Closing Unit, 10,000 PSI Working Pressure, Approx. 200-Gallon HYD Tank, (12) 11-Gallon Accumulator Bottles, Triplex Pump P/B 20 HP Electric Motor, (2) Air Pumps, 10’W x 20’L Covered Skid, W/Round Top, Fluorescent Lighting, Assorted 2” S.S. Flex Hoses, Master Skidded (1) Cameron 11” x 10,000# DBL B.O.P. Flanged Top & Bottom, (1) Cameron 11” x 10,000# Single B.O.P. Flanged Top & Bottom, (1) 11” x 10,000# Drilling Spool W/(2) 4-1/16” x 10,000# Outlets, (1) 4-1/16” x 10,000# Gate Valves, (2) 2-1/16” x 5,000# Gate Valves, 60”Dia. X 20’H Vertical Degasser, Skidded K#: K29399

1472 9 N LH 500-T Block & C.Emsco

400-T Swivel (Rig 116) LH YC-450 500- Ton Traveling Block, W/ (6) 60” Sheaves, Grooved F/1-3/8” Drill Line W/ (1) 500-Ton Raising Beckett, Continental Emsco LB-400 400-Ton Swivel, S/N: 225 K#: K29389

1473 9 N (2) Junk Baskets & (20) 27'L

Triangular Pipe Racks (Rig 116) (1) 8’W x 3’H x 36’L Steel Junk Basket, Skidded W/Contents: Change Over & Lift Subs, Elevator, Drill Collar Slips, Mud Bucket, Stairs, Safety Rails, Misc Rig Parts, (1) 8’W x 3’H x 24’L Steel Junk Basket, Skidded W/Contents: Assorted Pipes, Fiver Star Wireline Measuring Device, Misc Rig Parts, (2) Sets (4) 18”H x 27’L Triangular Pipe Racks, & (8) Sets (16) 42”H x 27’L Triangular Pipe Racks K#: K29400




1996 CITATION 1000 HP SCR MOBILE DRILLING RIG

1474 21 AB 1996 Citation 1000HP SCR Mobile Drilling Rig 12,500' Drilling Depth w/4" Drill Pipe. Citation 1000HP Drawworks p/b Toshiba 1000HP Traction Motor w/Water Brake, w/1-1/4" Line, Mtd. on T/A Narrow-Neck Trailer, Cabot 127'H 550,000# SHL Cantilever Mast, 15'H 2-Section Telescoping Substructure (40'L & 18'W), (2) Kato 800KW Gensets p/b (2) CAT D398 Diesel Engines (Eng Hours: 18,454/39,505), w/(3)-Bay IPS SCR Systems, Mtd. in Van Trailers, G.Denver PZ9 1000HP Triplex Pump p/b GE 752 Traction Motor, 2-Pit 550-Bbl Mud System w/(2) Shale Shakers, Desander/Desilter, 500-Bbl Water Tank, Water/Fuel Tank Combo, Toolpusher House, Change House, Junk Box w/Handling Tools, Shaffer 11" 5K Ann. BOP, Shaffer LWS 11" 5K Double BOP, 5-Station Accumulator, 5K 1500-Series Choke Manifold, Oilwell 20.5" Rotary Table, Ideco 360-T Block/Hook Combo, Emsco 300-T Swivel, 5-1/4" Hex Kelly & Bushing, 58'L Catwalk, Slickline Unit, Tubulars: (11,900') 4" R2 BN Drill Pipe w/4"FH Conn, HB, (3) 8" OD x 30'L Drill Collars w/6-5/8 H-90 Conn, (15) 6-1/2" OD x 30'L Drill VIN/SN: No serial number found K#: U547527*

WILSON 75 PARTIAL DRILLING RIG (R1) 1475 14 S Wilson 75 Partial Drilling Rig

Package (R1) 134’H Cantilever Mast w/2006 YG225 Block Hook Combo, 4-Pc Box-On-Box 16’H Substructure, Wilson Power Rig S/D Drawworks w/Dual Inline CAT Engines, Catwalk & V-Door w/(2) 18”H Pipe Racks, 5,000 PSI Flowback Skid, 10-Chamber Desilter, 2-Chamber Desander, Shaker, & 35’L Junk Basket w/Assorted Pipe. (BUYER RESPONSIBLE FOR LOADOUT.) K#: K28117

1476 14 S Wilson 75 Drawworks w/Dual

Inline CAT 6-Cyl Engines (R1) 1-1/8” Leebus Groove, Foster Catheads, Drillers Console, 23” Water Brake, S/N 37328, Twin CAT Inline 6 Cylinder Turbo Diesel Engines, Ea w/National Oilwell Type F Torque Converters, Mtd 4’6”L x 2’D Pressure Bottle, All Mtd On 30’L x 10’W Skid. (BUYER RESPONSIBLE FOR LOADOUT.) K#: K28120

1477 14 S 134’H Cantilever Mast w/2006

YG225 Block Hook Combo (R1) Mast w/Racking Board, 5-Sheave Crown Cluster, 36”OD, 1-Sheave Fastline, 55”OD, 1-1/8” Line, Line Spool w/Stand & Line, Mast Stand, Beams, 2006 YG225 250 Ton Block, 5-Sheave, 36”OD, Voore CSCNAJ Hook. DOES NOT INCLUDE PIPE RACKS OR CATWALK SHOWN IN PICS. (BUYER RESPONSIBLE FOR LOADOUT.) K#: K28118




1478 14 S 16'H 4-Pc Box-On-Box Substructure (R1) 44’L x 7’H Top Sections, 50’L x 9’H Bottom Sections, DJ Air Hoist, Transformer w/Lifting Cage, National Supply Deadline Anchor, Mtd Pressure Bottle, Tool Frames, All Stairs & Railings. (BUYER RESPONSIBLE FOR LOADOUT.) K#: K28119

1479 14 S Catwalk & V-Door w/(2) 18”H

Pipe Racks (R1) 20’8”L x 6’W V-Door, 55’L x 6’1”W Catwalk. DOES NOT INCLUDE MAST, LINE DRUM, OR TRAVEL BLOCK SHOWN IN PICS. (BUYER RESPONSIBLE FOR LOADOUT.) K#: K28121

1480 14 S 35’L Mud Volume Tank (R1)

35’L x 7’10”W, OAL 38’, Various ID Flow Line, Kelly, & Misc Components Shown. (BUYER RESPONSIBLE FOR LOADOUT.) K#: K28128

1481 14 S Shale Shaker (R1)

Single Shaker Motor, Belt Driven, p/b 5 HP Siemens Electric Motor, Siemens ON/OFF Switch, (1) 10” Port. (BUYER RESPONSIBLE FOR LOADOUT.) K#: K28127

Choice of 2 - Lots 1482-1483 1482 14 S 10-Cone Desilter (R1)

55”L x 32”W Basin w/6” Port, (2) 6” Flow Lines. (BUYER RESPONSIBLE FOR LOADOUT.) K#: K28125

1483 14 S 2-Cone Desander (R1) 31”L x 14”W Basin w/6” Port, (2) 8” Flow Lines. (BUYER RESPONSIBLE FOR LOADOUT.) K#: K28126

1484 14 S 5,000# Choke Manifold (R1)

(1) 4-1/16” Studded Flange Connection Port, (3) 4”ID Hose Ports, (2) 2” 400 Lines w/Flow Control Valves, (7) Wheel Valves, All Mtd On 12’L x 7’7”W x 2’6”H Skid, OAL 15’. (BUYER RESPONSIBLE FOR LOADOUT.) K#: K28122

1485 14 S Transfer Pump Skid w/Pumps

(R1) 4’L x 4’W x 2’6”H Tank, (1) Mission 1x1.5C11 Pedestal Pump, & (1) Mission 1.5x2R Pedestal Pump, Ea p/b 5 HP GE AC Electric Motor, Mtd Control Panel, All Mtd On 10’L x 5’W Skid. (BUYER RESPONSIBLE FOR LOADOUT.) K#: K28124

1486 14 S 10’L x 4’D Atmospheric

Degasser (R1) (BUYER RESPONSIBLE FOR LOADOUT.) K#: K28123




GENSETS / MUD PUMPS / DRILLING COMPONENTS

Choice of 2 - Lots 1487-1488 1487 8 N CAT 3456/450KW Diesel

Powered Genset Magna Max 450 KW Genset, P/B CAT 3456 Diesel Engine S/N: 3PG1335, W/Electric Starter, Radiator Gauges, Exhaust Muffler, Skidded, QTY (2) Sullivan Palatek 30DG Air Compressors, Each P/B 30 HP Electric Motors, W/Air Volume Tanks, GE Evolution Series 9000 Electrical Panel, Storage, Fluorescent Lighting, All MTD in 11’W x 42’L Round Top Generator House, Master Skidded K#: K23639

1488 8 N CAT C15/380KW Diesel

Powered Genset Magna Max 380 KW Genset P/B Cat C15 Diesel Engine, S/N: JRE00193, W/Electric Starter, Radiator Gauges, Exhaust Muffler, Skidded, Magna Max 450 KW Genset P/B Cat 3456 S/N: 3PG01660, W/Electric Starter, Radiator Gauges, Exhaust Muffler, Skidded, QTY (2) Sullivan Palatek Air Compressors, Each P/B 30 HP Electric Motors, Air Volume Tanks, GE E9000 Electric Panel, Storage, Fluorescent Lighting, All MTD In 11’W x 42’L Round Top Generator House, Master Skidded K#: K23641

1489 8 N SCR House

10’W x 30’L W/ 8’L Covered Porch Extension, Assorted Electrical Panels, , Outdoor Electrical Receptacles, Fluorescent Lighting, Transformers, (2) A/C Units, (2) Entrance Doors, Skidded (NOTE: Both Doors Welded Closed, & Could NOT Look Inside) K#: K23644

Choice of 2 - Lots 1490-1491 1490 8 N FC-1000 Triplex Mud Pump p/b

CAT D3508 Diesel Engine S/N: N/A, 6-3/4” Piston Size, Forged Steel Fluid Ends W/Quick Change Caps, Five Star 6” x 5” x 11” Cent Pump P/B 50 HP Electric Motor, Continental Emsco Type Pulsation Dampener, P/B Cat D-3508 Diesel Engine, S/N: N/A, W/Air Starter, Gauges, Exhaust Muffler (Radiator Core Has Been Cut Out) National Torque Converter, Belt Drive Assembly W/Shroud, Air Volume Tank, Master Skidded K#: K29259

1491 8 N FC-1000 Triplex Mud Pump p/b

CAT D3508 Diesel Engine S/N: N/A, 6-3/4” Piston Size, Forged Steel Fluid Ends W/Quick Change Caps, Five Star 6” x 5” x 11” Cent Pump P/B 50 HP Electric Motor, Continental Emsco Type Pulsation Dampener, P/B Cat D-3508 Diesel Engine, S/N: CBB00401, W/Air Starter, Gauges, Exhaust Muffler (Radiator Core Has Been Cut Out) National Torque Converter, Belt Drive Assembly W/Shroud, Air Volume Tank, Master Skidded K#: K23640

1492 13 R Ideco T-800 Triplex Mud Pump

p/b CAT D398 Diesel Engine 6-3/4" Liner Size, W/Forged Steel Fluid Modules W/Quick Change Caps, Hydril K-20 Pulsation Dampener, Mud Gauge, Oteco 2" Shear Relief Valve, Belt Drive Assembly, P/B Cat D398 850 HP Diesel Engine, S/N: 66B03516, W/O Starter, Perex Pak Radiator, Fan & Shroud, Gauges, Fuel & Air Tans, Master Skidded VIN/SN: L69 K#: K24926




1493 1 C 224-Bbl Mud Tank w/ Baffles & Internal Plumbing, Ladder & Catwalk. K#: K22123

1494 8 N 110-BBL Trip Tank

8’W x 8’H x 10’L, Flat Steel, Open Top, W/6’L Covered Porch Extension, Five Star 6” x 5” x 11” Cent Pump P/B 30 HP Electric Motor, Skidded K#: K23643

1495 8 N Derrick Tandem Shale Shakers

QTY (2) Derrick Shale Shakers, Each P/B (2) Derrick Super G Motors, All MTD on 8’W x 16’L Skid, Skidded K#: K23647

Choice of 3 - Lots 1496-1498 1496 1 N Ameri-Tech 39'L Crew House

10'W x 39'L x 10'H, 2-Bed, 2-Bath, Skidded VIN/SN: 10-14066 K#: K28997

1497 8 N 50'L Crew House

12’W x 50’L, W/(3) Bedrooms, (2) Bathrooms, Kitchen, Living Area, Refrigerator, Stove, Sink, Kitchen Table, Couch, Water Heater, Heat-A/C Unit, Skidded K#: K23642

1498 8 N 50'L Rig Managers House 12’W x 50’L, (2) Bedrooms, (2) Bathrooms, Kitchen, Refrigerator, Stove, Sink, Microwave, Couch, Clothes Washing Machine, Heat-A/C Unit, Skidded K#: K23650

1499 8 N 20'L Rectangular Fuel Tank

8’W x 8’H x 20’L Flat Steel Fuel Tank, W (2) 3’L Porch Extensions, (2) 1.5” x 1.5” Fuel Transfer Pumps, Each P/B 5 HP Electric Motors, Skidded K#: K29260

1500 1 H 12,000 Gallon Fuel Tank

w/Containment Fuel Tank w/ Integrated containment, 7'w x 30'L x 11'H w/ Loading Hitches K#: K22125

1501 1 H 8,000 Gallon Fuel Tank w/ Fuel

Porch p/b Marathon 1 HP Electric Motor & Hoses, 21'L x 8'W x 9'H K#: K28995

1502 3 A Skidded Fuel Tank

42” DIA x 90” L, Steel Fuel Tank, Skidded, W/ Tuthill Fill-Rite Series 700A 110-Volt Electric Transfer Pump, W/ Filter System, Auto Cut Off Nozzle & Fuel Hose, W/ 14-½” W x 8’-6” L Catwalk W/ Step K#: K27619




1503 3 A 7.5’ W x 14’ L Steel Skid K#: K29228

1504 13 R 2008 Koomey Type 80 5-

Station Accumulator MA060-11SB3, W/ (8) 11-Gallon Accumulator Bottles, (2) Triplex Pumps Each P/B 25 HP Electric Mowers, Approx. 200-Gallon HYD Tank, Large Assorted 2" S.S. Hoses, All MTD on 8'W x 22'L Skid, W/Removable/Adjustable Roof, W/Rig Lighting, Master Skidded VIN/SN: 6085 K#: K24927

1505 8 N Koomey Type 80 5-Station

Accumulator S/N: N/A, W/ (20) 11-Gallon Accumulator Bottles, Approx. 200-Gallon HYD Tank, Triplex Pump P/B 20 HP Electric Motor, (2) Air Pumps, Gauges, Control Panel, All MTD on 6’W x 15’L Covered Skid, Skidded K#: K23648

1506 3 A 4-Station Skid MTD

Accumulator Closing Unit Approx. 80-Gallon HYD Tank, (4) Approx. 11-Gallon Accumulator Bottles, Kerr KU-1250 Duplex Pump, P/B Duetz MAG Air Cooled Single Cylinder Diesel Engine S/N: N/A, Twin Disc C106SP-5 Torque Converter, Belt Drive Assembly W/Guard, Battery Box, All MTD on 5’W x 10’L Steel Skid, Skidded W/Lift Frame K#: K24603

1507 1 N PSK PY-01 KQ Portable

Hydraulic Power Source K#: K28985

1508 2 W Quincy Q490 Air Compressor p/b Koerner 100 Hp Elec Motor w/ Air Cooler p/b Baldor Elec Motor, Centrimaze Dry Type Air Filter, Skid Mtd VIN/SN: QS490ACA331116 K#: K018403

Choice of 2 - Lots 1509-1510 1509 8 N Continental Emsco 27-1/2”

Rotary Table S/N: 521, W/ (1) Master Bushing K#: K23645

1510 8 N PJ Petro ZP-275 Rotary Table

27-1/2”, W/ (1) Spilt Master Bushing & (1) Master Bushing K#: K23646

1511 8 N Continental Emsco 300-Ton

Block W/ (5) 36” Sheaves Grooved F/1-3/8” Drill Line K#: K23649

1512 1 N Stainless Steel Driller’s

Console K#: K28984

1513 1 N (2) 4-Station BOP Control

Panels K#: K28983 '




1514 1 N Lg Qty Pulsation Dampener Mounting Blocks & Strainers (6 plts) K#: K28982

Choice of 4 - Lots 1515-1518 1515 1 N Twin Disc F-16003 Torque

Converter K#: K28963

1516 1 N Twin Disc F-16003 Torque


1517 1 N Twin Disc F11524 TCI Torque


1518 1 N Twin Disc F1161 TCO Torque


Choice of 4 - Lots 1519-1522 1519 1 N Oil Works 195-100 Torque


1520 1 N Oilworks 195-100 Torque


1521 1 N Oil Works 27" HD Torque Converter K#: K28960

1522 1 N Oil Works 27" HD Torque


Choice of 3 - Lots 1523-1525 1523 1 N Oil Well TCC-955 CAT Torque


1524 1 N Oilwell TCC-955 CAT Torque


1525 1 N Oilwell TCC-955 CAT Torque


Choice of 9 - Lots 1526-1534 1526 1 N National Oilwell C-300-64

Torque Converter K#: K28975

1527 1 N National Oilwell C-300-64





1528 1 N National Oilwell C-300-64 Torque Converter K#: K28968













Choice of 4 - Lots 1535-1538 1535 1 N National Oilwell C-245-100








Choice of 4 - Lots 1539-1542 1539 1 N (11) Kelley Saver Subs w/

Brass K#: K28980

1540 1 N (7) Kelley Saver Subs w/ Brass

K#: K29981


K#: K28979


K#: K28978




Choice of 3 - Lots 1543-1545 1543 3 A 8-7/8” OD x 4’H Mud Bucket &

(2) Lay Flat Hoses K#: K26081

1544 3 A 2-7/8” OD x 4’H Mud Bucket &

(2) Lay Flat Hoses K#: K26082

1545 3 A 4” OD x 6’H Mud Bucket & (2)

Lay Flat Hoses K#: K26080

1546 1 N (15) Ceramic Mudpump Liners

K#: K29000

CASING / HANDLING TOOLS 1547 1 X PMG TS 5-1/2” 100 Ton API

Bowl w/Slip (No Dies) K#: K22119

Choice of 2 - Lots 1548-1549 1548 1 E Eckels 5-1/2” Hydraulic Casing

Tongs K#: K22136

1549 1 E Eckels 5-1/2” Hydraulic Casing

Tongs K#: K22135

1550 1 E (2) JT/Four International SSW-40 Pipe Spinners K#: K22134

1551 1 E Foster Hyd. Kelley Spinner

w/Hanger K#: K22137

1552 1 E Varco 400 Ton Hyd. Spider w/

5-1/2" Slips K#: K22147

1553 1 E Varco 37.5" FMS Body

K#: K22148

Choice of 4 - Lots 1554-1557 1554 1 E Varco 400 Ton 3-1/2”-5-1/2”

Casing Spider Slip Inserts K#: K22138

1555 1 E Varco 400 Ton 3-1/2”-5-1/2

”Casing Spider Slip Inserts K#: K22141

1556 1 E Varco 400 Ton 3-1/2”-5-1/2”

Casing Spider Slip Inserts K#: K22140




1557 1 E Varco 400 Ton 3-1/2”-5-1/2” Casing Spider Slip Inserts K#: K22139

Choice of 3 - Lots 1558-1560 1558 1 E (2) BJ 350 Ton 5-1/2" Casing

Spider Slip Inserts K#: K22144

1559 1 E (2) BJ 350 Ton 5-1/2" Casing


1560 1 E (2) BJ 350 Ton 7" Casing


Choice of 2 - Lots 1561-1562 1561 1 E Varco SL 24” Slips

K#: K22143

1562 1 E Varco SL 20” Slips

K#: K22142

Choice of 2 - Lots 1563-1564 1563 1 E (4) YT 75 Ton Slip Type

Elevators (No Slips) K#: K22132

1564 1 E (3) MYT 40 Ton Slip Type Elevators (No Slips) K#: K22133

Choice of 2 - Lots 1565-1566 1565 1 E (2) 250 Ton 5” MCG Elevators

K#: K22131

1566 1 E Varco (1) 350 Ton 5” Elevator

K#: K22130

Choice of 3 - Lots 1567-1569 1567 1 E (2) 3-1/16 5M Manual Gate

Valves K#: K22129

1568 1 E (1) 4-1/16” 15M HCR Valve

K#: K22127

1569 1 E (1) 4-1/16” 15M HCR Valve

K#: K22128

DRILL PIPE / DRILL COLLARS 1570 8 N 24,118’ (778 Joints) 5-1/2”

Grade 105 19.50 # Drill Pipe W/ NC46 Conns, 6-1/4” Average OD Tool Joints, HB, DWB, W/O Papers K#: K29299




Choice of 2 - Lots 1571-1572 1571 9 N 10,726’ (346 Joints) 5” Mixed

Grade 19.50# Drill Pipe W/4-1/2” IF Conns, 6-1/8” Average OD Tool Joints, HB, DWB, Without Papers K#: K29422

1572 9 N 10,199’ (329 Joints) 5” G-105

19.50# Drill Pipe W/4-1/2” IF Conns, 6-1/8” Average OD Tool Joints, HB, DWB, Without Papers K#: K29453

Choice of 4 - Lots 1573-1576 1573 9 N 5,115’ (165 Joints) 5” G-105


1574 9 N 4,278’ (138 Joints) 5” G-105


1575 9 N 3,968’ (128 Joints) 5” G-105


1576 9 N 620’ (20 Joints) 5” G-105 19.50# Drill Pipe W/4-1/2” IF Conns, 6-3/8” Average OD Tool Joints, HB, DWB, Without Papers K#: K29426

1577 8 N 12,307’ (397 Joints) 4-1/2”

16.60 # Drill Pipe W/4-1/2” XH Conns, DWB, W/O Papers K#: K29298

Choice of 2 - Lots 1578-1579 1578 9 N 14,756’ (476 Joints) 4” S-135

14.40# Drill Pipe W/4” FH Conns, 5-1/4” Average OD Tool Joints, HB, DWB, Without Papers K#: K29404

1579 9 N 14,446’ (466 Joints) 4” S-135

14.40# Drill Pipe W/4” FH Conns, 5-3/16” Average OD Tool Joints, HB, DWB, Without Papers K#: K29425

1580 3 A (1240’) (40 JTS) of 4-½” OD

Range 2 16.60# Drill Pipe W/ 4-½” H-90 Conns, 6” Average OD B.N. Tool Joints (No Papers) K#: K27620




Choice of 2 - Lots 1581-1582 1581 9 N (1,085’) (35 JTS) of 5” Heavy

Weight Drill Pipe W/BN Tool Joints, 4-1/2” IF Conns, HB K#: K29417

1582 9 N (248’) (8 JTS) of 5” Heavy

Weight Drill Pipe W/BN Tool Joints, 4-1/2” IF Conns, HB K#: K29444

Choice of 3 - Lots 1583-1585 1583 9 N (1,395’) (45 JTS) of 4” Heavy

Weight Drill Pipe W/BN Tool Joints, 4” FH Conns, HB K#: K29424

1584 9 N (713’) (23 JTS) of 4” Heavy


1585 9 N (682’) (22 JTS) of 4” Heavy


Choice of 12 - Lots 1586-1597 1586 8 N 8-3/16” OD x 2-7/8”ID x 30.86’L

Slick Drill Collar W/NC 56 Conns, Single Recessed, HB K#: K29328

1587 8 N 8-1/8” OD x 2-7/8”ID x 31.26’L Slick Drill Collar W/NC 56 Conns, Single Recessed, HB K#: K29304

1588 8 N 8-1/8” OD x 2-15/16”ID x

30.84’L Slick Drill Collar W/NC 56 Conns, Single Recessed, HB K#: K29330

1589 8 N 8-1/8” OD x 2-7/8”ID x 30.76’L


1590 8 N 8-1/16” OD x 2-7/8”ID x 31.12’L


1591 8 N 8-1/16” OD x 2-7/8”ID x 31.25’L


1592 8 N 8” OD x 2-15/16”ID x 31.13’L





1593 8 N 8” OD x 2-7/8”ID x 31.10’L Slick Drill Collar W/NC 56 Conns, Single Recessed, HB K#: K30292

1594 8 N 8” OD x 2-3/4”ID x 30.97’L Slick

Drill Collar W/NC 56 Conns, Single Recessed, HB K#: K30298

1595 8 N 8” OD x 2-13/16”ID x 30.77’L


1596 8 N 8” OD x 2-7/8”ID x 30.70’L Slick


1597 8 N 8” OD x 2-7/8”ID x 30.02’L Slick


Choice of 16 - Lots 1598-1613 1598 8 N 7-15/16” OD x 2-7/8”ID x



1600 8 N 7-15/16” OD x 3”ID x 29.68’L


1601 8 N 7-15/16” OD x 2-7/8”ID x


1602 8 N 7-7/8” OD x 2-15/16”ID x


1603 8 N 7-7/8” OD x 2-7/8”ID x 31.05’L


1604 8 N 7-7/8” OD x 2-7/8”ID x 31.04’L






1606 8 N 7-7/8” OD x 2-7/8”ID x 31.04’L


1607 8 N 7-13/16” OD x 2-15/16”ID x


1608 8 N 7-7/8” OD x 2-7/8”ID x 30.80’L


1609 8 N 7-7/8” OD x 2-13/16”ID x


1610 8 N 7-7/8” OD x 2-7/8”ID x 30.51’L


1611 8 N 7-7/8” OD x 3”ID x 30.12’L Slick Drill Collar W/NC 56 Conns, Single Recessed, HB K#: K29312

1612 8 N 7-7/8” OD x 3”ID x 29.22’L Slick


1613 8 N 7-7/8” OD x 2-7/8”ID x 26.62’L




1615 8 N 7-3/4” OD x 2-7/8”ID x 29.35’L


1616 8 N 7-3/4” OD x 3-1/8”ID x 28.83’L

Slick Drill Collar W/NC 56 Conns, Double Recessed, HB K#: K29310





1618 8 N 7-3/4” OD x 3-1/8”ID x 28.65’L


1619 8 N 7-3/4” OD x 3-1/8”ID x 28.42’L


1620 8 N 7-3/4” OD x 3-1/8”ID x 28.31’L


1621 8 N 7-3/4” OD x 3-1/4”ID x 27.96’L


1622 8 N 7-5/8” OD x 3-1/4”ID x 30.85’L



1624 8 N 7-5/8” OD x 3-1/8”ID x 29.78’L


1625 8 N 7-5/8” OD x 3-1/8”ID x 28.54’L


1626 8 N 7-1/2” OD x 3”ID x 30.84’L Slick



Slick Drill Collar W/4-1/2” XH Conns, Single Recessed, HB K#: K29278

1628 8 N 6-1/4” OD x 2-3/8”ID x 30.74’L





1629 8 N 6-1/4” OD x 2-3/8”ID x 30.72’L Slick Drill Collar W/4-1/2” XH Conns, Single Recessed, HB K#: K29263

1630 8 N 6-1/4” OD x 2-1/2”ID x 30.41’L


1631 8 N 6-1/4” OD x 2-7/16”ID x 30.40’L


1632 8 N 6-1/4” OD x 2-1/2”ID x 30.96’L


1633 8 N 6-1/4” OD x 2-1/2”ID x 30.50’L


1634 8 N 6-1/4” OD x 2-9/16”ID x 30.89’L



1636 8 N 6-1/4” OD x 2-3/8”ID x 30.62’L


1637 8 N 6-1/4” OD x 2-5/8”ID x 30.48’L


1638 8 N 6-1/4” OD x 2-5/8”ID x 30.62’L


1639 8 N 6-1/4” OD x 2-9/16”ID x 30.43’L


1640 8 N 6-1/4” OD x 2-1/2”ID x 30.47’L






1642 8 N 6-1/4” OD x 2-1/2”ID x 30.40’L


1643 8 N 6-1/4” OD x 2-1/2”ID x 30.64’L


1644 8 N 6-1/4” OD x 2-7/16”ID x 30.42’L


1645 8 N 6-1/4” OD x 2-1/2”ID x 30.84’L


1646 8 N 6-1/4” OD x 2-5/8”ID x 30.83’L



1648 8 N 6-1/4” OD x 2-1/2”ID x 30.97’L


1649 8 N 6-1/4” OD x 2-3/8”ID x 30.09’L




1651 8 N 6-1/4” OD x 2-9/16”ID x 29.67’L


1652 8 N 6-1/4” OD x 2-1/2”ID x 29.85’L






1654 8 N 6-1/4” OD x 2-9/16”ID x 29.67’L


1655 8 N 6-1/4” OD x 2-1/2”ID x 29.67’L


1656 8 N 6-1/4” OD x 2-1/2”ID x 29.93’L


1657 8 N 6-1/4” OD x 2-5/8”ID x 29.11’L


1658 8 N 6-1/4” OD x 2-1/2”ID x 29.67’L



1660 8 N 6-1/4” OD x 2-5/8”ID x 29.36’L


1661 8 N 6-1/4” OD x 2-5/8”ID x 29.68’L


1662 8 N 6-1/4” OD x 2-1/2”ID x 29.71’L


1663 8 N 6-1/4” OD x 2-3/8”ID x 29.64’L


Choice of 6 - Lots 1664-1669 1664 9 N 8” OD x 2-15/16” ID x 31.01’L

Slick Drill Collar W/6-5/8” REG Conns, Single Recessed, HB K#: K29436




1665 9 N 7-7/8” OD x 2-15/16” ID x 30.86’L Slick Drill Collar W/6-5/8” REG Conns, Single Recessed, HB K#: K29434

1666 9 N 7-7/8” OD x 2-13/16” ID x

30.67’L Slick Drill Collar W/7-5/8” REG XH Conns, Single Recessed, HB K#: K29415

1667 9 N 7-7/8” OD x 2-15/16” ID x

29.15’L Slick Drill Collar W/6-5/8” REG Conns, Single Recessed, HB K#: K29435

1668 9 N 7-3/4” OD x 2-13/16” ID x


1669 9 N 7-3/4” OD x 2-13/16” ID x


Choice of 3 - Lots 1670-1672 1670 9 N 9” OD x 3-1/16” ID x 15.21’L

Spiral Pony Collar W/7-5/8” REG Conns, Single Recessed, HB (NOTE: Pin End Cut OFF) K#: K29443

1671 9 N 8-1/2” OD x 3-1/2” ID x 19.91’L Slick Pony Collar W/7-5/8” REG XH Conns, Single Recessed, HB K#: K29412

1672 9 N 7-3/4” OD x 2-5/16” ID x 12.31’L

Slick Pony Collar W/6-5/8” REG Conns, Single Recessed, HB (NOTE: Box Has Been Cut OFF) K#: K29452

Choice of 12 - Lots 1673-1684 1673 9 N 6-3/4” OD x 2-5/16” ID x 31.05’L


1674 9 N 6-1/2” OD x 2-5/16” ID x 31.17’L


1675 9 N 6-1/2” OD x 2-1/2” ID x 31.14’L


1676 9 N 6-1/2” OD x 2-3/8” ID x 31.16’L





1677 9 N 6-1/2” OD x 2-5/16” ID x 30.82’L Slick Drill Collar W/4-1/2” XH Conns, Single Recessed, HB K#: K29440

1678 9 N 6-1/2” OD x 2-3/8” ID x 30.83’L


1679 9 N 6-1/2” OD x 2-5/16” ID x 30.77’L


1680 9 N 6-1/2” OD x 2-5/16” ID x 30.62’L

Spiral Drill Collar W/4-1/2” XH Conns, Single Recessed, HB K#: K29408

1681 9 N 6-1/2” OD x 2-1/4” ID x 31.08’L


1682 9 N 6-7/16” OD x 2-3/8” ID x 31.19’L


1683 9 N 6-7/16” OD x 2-7/16” ID x 31.27’L Slick Drill Collar W/4-1/2” XH Conns, Single Recessed, HB K#: K29433

1684 9 N 6-7/16” OD x 2-3/8” ID x 31.09’L


Choice of 11 - Lots 1685-1695 1685 9 N 6-5/16” OD x 2-5/16” ID x

31.29’L Slick Drill Collar W/4-1/2” XH Conns, Single Recessed, HB K#: K29407

1686 9 N 6-5/16” OD x 2-7/16” ID x


1687 9 N 6-5/16” OD x 2-3/8” ID x 31.06’L


1688 9 N 6-1/4” OD x 2-5/16” ID x 30.75’L





1689 9 N 6-1/4” OD x 2-7/16” ID x 30.39’L Spiral Drill Collar W/4-1/2” XH Conns, Single Recessed, HB K#: K29448

1690 9 N 6-1/4” OD x 2-1/2” ID x 30.18’L


1691 9 N 6-3/16” OD x 2-7/16” ID x


1692 9 N 6-3/16” OD x 2-7/16” ID x

30.01’L Spiral Drill Collar W/4-1/2” XH Conns, Single Recessed, HB K#: K29449

1693 9 N 6-1/8” OD x 2-5/16” ID x 30.48’L


1694 9 N 6-1/8” OD x 2-7/16” ID x 30.48’L


1695 9 N 6-1/8” OD x 2-7/16” ID x 30.03’L Spiral Drill Collar W/4-1/2” XH Conns, Single Recessed, HB K#: K29451

Choice of 7 - Lots 1696-1702 1696 3 A 5-⅝” OD x 2-¼” ID x 29.79’ L

Slick Drill Collar W/ 4-½” IF Conn K#: K27444

1697 3 A 4-¾” OD x 2-¼” ID x 31.18’ L

Slick Drill Collar W/ 3-½” IF Conn Zipped Grooved F/ Elevator & Slips K#: K27441

1698 3 A 4-¾” OD x 2-⅜” ID x 30.85’ L


1699 3 A 4-¾” OD x 2-⅜” ID x 30.85’ L


1700 3 A 4-¾” OD x 2-⅜” ID x 30.15’ L





1701 3 A 4-¾” OD x 2-7/16” ID x 30.07’ L Spiral Drill Collar W/ 3-½” IF Conn Zipped Grooved F/ Elevator & Slips K#: K27447

1702 3 A 4-¾” OD x 2-½” ID x 29.53’ L


Choice of 19 - Lots 1703-1721 1703 3 A 4-⅛” OD x 2-¼” ID x 31.39’ L

Slick Drill Collar W/ 2-⅞” XH Conn K#: K27551

1704 3 A 4-⅛” OD x 2-1/16” ID x 31.26’ L


1705 3 A 4-⅛” OD x 2-⅜” ID x 31.12’ L


1706 3 A 4-⅛” OD x 2-3/16” ID x 31.08’ L


1707 3 A 4-⅛” OD x 2” ID x 31.03’ L Slick

Drill Collar W/ 2-⅞” XH Conn K#: K27554

1708 3 A 4-⅛” OD x 2-3/16” ID x 30.97’ L Slick Drill Collar W/ 2-⅞” XH Conn K#: K27450

1709 3 A 4-⅛” OD x 2-1/16” ID x 30.91’ L

Spiral Drill Collar W/ 2-⅞” XH Conn K#: K27565

1710 3 A 4-⅛” OD x 2-⅞” ID x 30.85’ L


1711 3 A 4-⅛” OD x 2-⅜” ID x 30.70’ L


1712 3 A 4-⅛” OD x 2-¼” ID x 30.68’ L


1713 3 A 4-⅛” OD x 2-9/16” ID x 30.42’ L


1714 3 A 4-⅛” OD x 2-3/16” ID x 30.37’ L


1715 3 A 4-⅛” OD x 2-¾” ID x 30.16’ L

Spiral Drill Collar W/ 2-⅞” XH Conn K#: K27552




1716 3 A 4-⅛” OD x 2-⅝” ID x 29.97’ L Slick Drill Collar W/ 2-⅞” XH Conn K#: K27556

1717 3 A 4-⅛” OD x 2-⅜” ID x 28.68’ L


1718 3 A 4-⅛” OD x 2-⅜” ID x 29.68’ L


1719 3 A 4-⅛” OD x 2-⅛” ID x 29.54’ L


1720 3 A 4-⅛” OD x 2-¼” ID x 29.38’ L


1721 3 A 4-⅛” OD x 2-3/16” ID x 28.99’ L


Choice of 36 - Lots 1722-1757 1722 3 A 3-½” OD x 2-⅛” ID x 30.28’ L

Slick Drill Collar W/ 2-⅜” IF Conn K#: K24682

1723 3 A 3-½” OD x 1-¾” ID x 32.08’ L Slick Drill Collar W/ 2-⅜” IF Conn K#: K24688

1724 3 A 3-½” OD x 1-½” ID x 32.04’ L

Slick Drill Collar w/ 2-3/8 IF Conn K#: K24669

1725 3 A 3-½” OD x 1-¾” ID x 32.03’ L


1726 3 A 3-½” OD x 1-¾” ID x 32.02’ L


1727 3 A 3-½” OD x 1-¾” ID x 32.01’ L


1728 3 A 3-½” OD x 2” ID x 32.01’ L Slick

Drill Collar W/ 2-⅜” IF Conn K#: K24671

1729 3 A 3-½” OD x 1-¾” ID x 31.71’ L


1730 3 A 3-½” OD x 1-¾” ID x 31.68’ L





1731 3 A 3-½” OD x 1-⅞” ID x 31.40’ L Spiral Drill Collar W/ 2-⅜” IF Conn K#: K24693

1732 3 A 3-½” OD x 1-⅞” ID x 31.40’ L

Spiral Drill Collar W/ 2-⅜” IF Conn K#: K24697

1733 3 A 3-½” OD x 1-⅞” ID x 31.39’ L


1734 3 A 3-½” OD x 1-⅞” ID x 31.39’ L


1735 3 A 3-½” OD x 1-⅞” ID x 31.38’ L


1736 3 A 3-½” OD x 1-⅞” ID x 31.37’ L


1737 3 A 3-½” OD x 1-⅞” ID x 31.37’ L


1738 3 A 3-½” OD x 1-⅞” ID x 31.36’ L


1739 3 A 3-½” OD x 1-⅞” ID x 31.33’ L Spiral Drill Collar W/ 2-⅜” IF Conn K#: K27438

1740 3 A 3-½” OD x 1-⅞” ID x 31.32’ L


1741 3 A 3-½” OD x 1-½” ID x 31.30’ L


1742 3 A 3-½” OD x 1-¾” ID x 31.13’ L


1743 3 A 3-½” OD x 1-⅞” ID x 31.03’ L


1744 3 A 3-½” OD x 1-⅞” ID x 30.95’ L


1745 3 A 3-½” OD x 1-⅞” ID x 30.85’ L


1746 3 A 3-½” OD x 1-⅞” ID x 30.81’ L





1747 3 A 3-½” OD x 1-9/16” ID x 30.73’ L Slick Drill Collar W/ 2-⅜” IF Conn K#: K24679

1748 3 A 3-½” OD x 1-¾” ID x 30.70’ L


1749 3 A 3-½” OD x 1-⅝” ID x 30.66’ L


1750 3 A 3-½” OD x 1-⅝” ID x 30.63’ L


1751 3 A 3-½” OD x 1-7/16” ID x 30.57’ L


1752 3 A 3-½” OD x 2” ID x 30.48’ L Slick


1753 3 A 3-½” OD x 2” ID x 30.45’ L Slick


1754 3 A 3-½” OD x 1-¾” ID x 30.44’ L

Slick Drill Collar w/ 2-3/8 IF Conn K#: K24668

1755 3 A 3-½” OD x 1-½” ID x 30.26’ L Slick Drill Collar W/ 2-⅜” IF Conn K#: K24681

1756 3 A 3-½” OD x 1-½” ID x 30.25’ L


1757 3 A 3-½” OD x 1-½” ID x 30.07’ L


Choice of 18 - Lots 1758-1775 1758 3 A 3-⅛” OD x 1-1/14” ID x 29.91’ L

Slick Drill Collar W/ 2-⅜” Reg Conn K#: K27579

1759 3 A 3-⅛” OD x 1-5/16” ID x 29.62’ L


1760 3 A 3-⅛” OD x 1-5/16” ID x 29.61’ L


1761 3 A 3-⅛” OD x 1-⅜” ID x 29.59’ L





1762 3 A 3-⅛” OD x 1-5/16” ID x 29.54’ L Slick Drill Collar W/ 2-⅜” Reg Conn K#: K27580

1763 3 A 3-⅛” OD x 1-5/16” ID x 29.43’ L


1764 3 A 3-⅛” OD x 1-⅜” ID x 29.41’ L


1765 3 A 3-⅛” OD x 1-5/16” ID x 29.31’ L


1766 3 A 3-⅛” OD x 1-5/16” ID x 29.24’ L


1767 3 A 3-⅛” OD x 1-⅜” ID x 29.23’ L


1768 3 A 3-⅛” OD x 1-½” ID x 29.18’ L


1769 3 A 3-⅛” OD x 1-7/16” ID x 29.05’ L


1770 3 A 3-⅛” OD x 1-⅜” ID x 29.02’ L Slick Drill Collar W/ 2-⅜” Reg Conn K#: K27582

1771 3 A 3-⅛” OD x 1-¼” ID x 29.00’ L


1772 3 A 3-⅛” OD x 1-5/16” ID x 28.97’ L


1773 3 A 3-⅛” OD x 1-⅜” ID x 28.78’ L


1774 3 A 3-⅛” OD x 1-5/16” ID x 28.68’ L


1775 3 A 3-⅛” OD x 1-5/16” ID x 28.46’ L


Choice of 10 - Lots 1776-1785 1776 3 A 2-⅞” OD x 1-⅝” ID x 30.70’ L

Slick Drill Collar W/ 2-⅜” PAC Conn K#: K27598




1777 3 A 2-⅞” OD x 1-¼” ID x 30.62’ L Slick Drill Collar W/ 2-⅜” PAC Conn K#: K27593

1778 3 A 2-⅞” OD x 1-⅜” ID x 30.32’ L


1779 3 A 2-⅞” OD x 1-3/16”ID x 30.26’ L


1780 3 A 2-⅞” OD x 1-⅜” ID x 30.13’ L


1781 3 A 2-⅞” OD x 1-⅜” ID x 30.06’ L


1782 3 A 2-⅞” OD x 1-⅛” ID x 29.97’ L


1783 3 A 2-⅞” OD x 1-7/16” ID x 29.51’ L


1784 3 A 2-⅞” OD x 1-½” ID x 29.92’ L


1785 3 A 2-⅞” OD x 1-½” ID x 28.99’ L Slick Drill Collar W/ 2-⅜” PAC Conn K#: K27592

1786 3 A QTY (13) 2-⅞”, 3-½”, & 3-⅛”

Drill Collars W/ 2-⅜” IF Conn (SCRAP) K#: K27440

1787 1 P (4) 6-1/2" Drill Collars w/ DC

Rack w/ 4-1/2" XH Connections, (2)-31'L, (1) 30'9"L, (1) 29'7"L, Drill Collar Racks (2) Pieces 18"W x 27'L x 27"H K#: K32397

Choice of 9 - Lots 1788-1796 1788 3 A QTY (1) 5” OD 4140 Grade

9.29’L Long Drill Pipe Pup Joint W/4-1/2” IF Box & Pin Conn K#: K27643

1789 3 A 4-1/2"IF x 176"L Drill Pipe Pup

Joint K#: K29227

1790 3 A 4-1/2" IF x 5''L x 5” OD Drill

Pipe Pup Joint K#: K29222

1791 3 A 4-1/2"IF Drill Pipe Pup Joint w/

5"OD Tool Joint K#: K30226




1792 3 A 3-1/2” IF x 66"L Drill Pipe Pup Joint, Tubing Pup Joint, & 2-3/8" 8RD Mule Shoe K#: K29223

1793 3 A 3-1/2" IF x 14'6" L Drill Pipe

Pup Joint K#: K29226

1794 3 A 3-1/2"IF x 10'L Drill Pipe Pup

Joint K#: K29225

1795 3 A 3-1/2”IF x 8'L Drill Pipe Pup

Joint K#: K29224

1796 3 A Asst. EUE Pup Joints

K#: K30218

1797 9 N QTY (4) 8’W x 5’H x 36’L Pipe

Tubs, Skidded (NOTE: Can NOT Be Picked Up Until K29417 & K29418 Has Been Removed) K#: K29419

Choice of 3 - Lots 1798-1800 1798 9 N (2) 42”H x 27’L Triangular Pipe

Racks (NOTE: Can NOT Be Picked Up Until ALL Drill Collars Have Been Removed) K#: K29437

1799 9 N (2) 20”H x 27’L Triangular Pipe Racks (NOTE: Can NOT Be Picked Up Until K29404 Has Been Removed) K#: K29416

1800 9 N (2) 18”H x 30’L Laydown Pipe

Racks (NOTE: Can NOT Be Picked Up Until ALL Pipe & Collars Have Been Removed) K#: K29454

Choice of 4 - Lots 1801-1804 1801 9 N (2) 16”H x 44’L I-Beam Pipe

Racks (NOTE: Can NOT Be Picked Up Until K29424 & K29425 Have Been Removed) K#: K29438

1802 9 N (2) 16”H x 30’L I-Beam Pipe

Racks (NOTE: Can NOT Be Picked Up Until ALL Pipe & Collars Have Been Removed) K#: K29446

1803 9 N (2) 16”H x 28’L I-Beam Pipe

Racks (NOTE: Can NOT Be Picked Up Until K29422 Has Been Removed) K#: K29423




1804 9 N (2) 16”H x 28’L I-Beam Pipe Racks (NOTE: Can NOT Be Picked Up Until K29420 Has Been Removed) K#: K29421

Choice of 3 - Lots 1805-1807 1805 3 A (2) Steel Pipe Racks

(2) Free Standing Racks F/ Pipe/Tubulars, 8’ W x 6’ H K#: K27621

1806 3 A (2) Steel Pipe Racks

(2) Free Standing Racks F/ Pipe/Tubulars, 8’ W x 6’ H K#: K27622

1807 3 A (2) 3'H x 14'L x 3'3"W

Triangular Pipe Racks K#: K30215

Choice of 6 - Lots 1808-1813 1808 3 A (2) 3’H x 12’L T-Type Pipe

Racks K#: K015438

1809 3 A (2) 3’H x 12’L Triangular Pipe

Racks K#: K015440

1810 3 A Qty (2) (1) Set of Steel Pipe Racks (2) Free Standing Racks F/ Pipe/Tubulars, 8’ W x 6’ H K#: K27623


Racks K#: K015439

1812 3 A (2) 2’8”H x 17’L T-Type Pipe

Racks K#: K015442


Racks K#: K015441

1814 1 P (4) Section Pipe Racks

(2) Pieces 3'W x 38'L x 9H K#: K32395

Choice of 2 - Lots 1815-1816 1815 1 P Pipe Racks

(2) Pieces 40'W x 90"L x 36"H K#: K32398

1816 1 P Pipe Rack

(2) Pieces 29"W x 90"L x 59"H K#: K32396




1817 1 P A Frame Tool Tool Rack w/(6) Tiers 4'W x7'L x 7'H K#: K32399

1818 1 P Stabilizer Rack 5'W x 10'L x

3"H K#: K32394

STABILIZERS

Choice of 9 - Lots 1819-1827 1819 1 P Stabilizer 8”OD x 74-7/8”OAL

W/4-1/2” XH Box x 4-1/2” XH Pin K#: K32371

1820 1 P Stabilizer 6-7/8” OD x 71-5/16”

OAL W/4-1/2” XH Box x 4-1/2” XH Pin w/SR K#: K32368

1821 1 P Stabilizer 8-3/16” OD x 83-

5/16”OAL W/4-1/2” XH Box x 4-1/2” XH Pin K#: K32369

1822 1 P Stabilizer Rack (2) Pieces

54”W x 77”L x 38” H K#: K32400

1823 1 P Stabilizer 9-3/4”OD x 81-1/4” OAL w/6-5/8” Regular Box x 6-5/8” Regular Pin K#: K32366

1824 1 P Stabilizer 7-3/16” OD x 72-1/8”

OAL W/4-1/2” XH Box x 4-1/2” XH Pin w/SR K#: K32367

1825 1 P Stabilizer 8”OD x 74-3/4”OAL

W/4-1/2” XH Box x 4-1/2” XH Pin K#: K32370

1826 1 P Stabilizer 5-3/4"”OD x 51-3/8”L

w/ 3-1/2” IF Box x 3-1/2 IF Pin K#: K32358

1827 1 P Stabilizer 9-3/4”OD x 81-1/4”

OAL w/6-5/8” Regular Box x 6-5/8” Regular Pin K#: K32365

Choice of 12 - Lots 1828-1839 1828 1 P Stabilizer 11"OD x 96-

5/16"OAL NC 56 Box x NC 56 Pin K#: K32363

1829 1 P Stabilizer 11-3/4” OD 59-1/2”

OAL w/ 6-5/8” Regular Box x 6-5/8 Regular Box K#: K32351




1830 1 P Stabilizer 11-3/4” OD x 55-1/2” OAL w/ 6-5/8 Regular Box & 4-1/2” XH Box K#: K32355

1831 1 P Stabilizer 11-1/2” OD x 61-1/4”

OAL w/ 4-1/2” IF Box x 4-1/2” XH Pin K#: K32356

1832 1 P Stabilizer 11-1/4”OD x 69-1/2”

OAL w/ 6-5/8” Regular Box x 6-5/8” Regular Pin K#: K32360

1833 1 P Stabilizer 11-5/8” OD x 96-7/8”

OAL W/ NC 56 Box x NC 56 Pin K#: K32361

1834 1 P Stabilizer 11-1/2”OD x 76-

5/8”OAL w/ 4-1/2 IF Box x 4-1/2”XH Pin K#: K32359

1835 1 P Stabilizer 11”OD x 76-5/8”OAL

w/ 4-1/2 IF Box x 4-1/2”XH Pin K#: K32357

1836 1 P Stabilizer 11-3/4” OD x 55-1/4”

OAL w/ 6-5/8” Regular Box & 4-1/2” XH Box K#: K32353

1837 1 P Stabilizer 10-1/2" OD x 81-1/4"OAL W/ 6-5/8" Regular Box x 6-5/8" Regular Pin K#: K32364

1838 1 P Stabilizer 12”OD X 53-5/16”

OAL w/ NC 56 Box x NC 56 Pin K#: K32354

1839 1 P Stabilizer 11-3/4” OD x 65-

1/4”OAL w/ 6-5/8” Box & 4-1/2”XH Box K#: K32352

Choice of 10 - Lots 1840-1849 1840 3 A (2) 8-3/4"OD Stabilizers; (1) 4-

1/2"XH & (1) 4-1/2" FH K#: K015436

1841 3 A (2) 8-3/4” OD Stabilizers w/ 4-

1/2” XH & 4-1/2” FH Connections K#: K015437

1842 3 A (4) 3-7/8"OD to 6"OD

Stabilizers (WASHPIPE EXTENSION NOT INCLUDED) K#: K30221

1843 3 A (3) Stabilizers & (2) Tubing

Crossovers 2-3/8” IF x 4-1/2” OD, 2-3/8” IF x 4-3/4” OD, 2-3/8” IF x 4-5/8 OD, (2) Tubing Crossovers K#: K30223




1844 1 P Stabilizer 7-3/8”OD x 57-5/8” L W/ 4-1/2 XH connections K#: K32374

1845 1 P Stabilizer 7-3/8”OD x 66-5/8” L

W/ 4-1/2 XH connections K#: K32375

1846 3 A 9-7/8” OD Stabilizer w/ 2-3/8” IF

Conn K#: K29209

1847 3 A (2) Stabilizers; 2-7/8"IF x 7-

1/16" OD & 2-3/8"IF x 9-7/8"OD 2 7/8” IF x 7 1/16” OD, 2 3/8” IF x 9 7/8” OD K#: K30211

1848 3 A (5) 3-5/8"OD to 6"OD

Stabilizers (WASHPIPE EXTENSION NOT INCLUDED) K#: K30220

1849 3 A Qty (2) Key Seat Wipers Single

Clutch 4-1/2" XH Conn K#: K23845

Choice of 16 - Lots 1850-1865 1850 3 A QTY (%) 2-7/8” IF Lift Subs

Asset# 14838, 14835, 14837,14836, N/A K#: K24303

1851 3 A (4) 2-7/8” IF Lift Subs K#: K24302

1852 3 A QTY (4) 2-3/8” IF Lift Subs

Asset# 90425, 90035, 0330, N/A K#: K24309

1853 3 A (4) 2-3/8” IF Lift Subs

K#: K24313

1854 3 A (4) 2-7/8” IF Lift Subs

K#: K24300

1855 3 A QTY (4) 2-3/8” IF Lift Subs

Asset# 90081, 90055, 01350, 90015 K#: K24310

1856 3 A (4) 2-7/8” IF Lift Subs

K#: K24301

1857 3 A QTY (4) 2-3/8” IF Lift Subs

Asset# 2140, 21039, 21038, 21037 K#: K24312

1858 3 A QTY (5) 2-3/8” IF Lift Subs

K#: K24307

1859 3 A (4) 2-3/8” IF Lift Subs

K#: K24306




1860 3 A QTY (3) 2-3/8” IF Lift Subs Asset# 04055, 04155, XXX K#: K24314

1861 3 A QTY (4) 2-3/8” IF Lift Subs

Asset# 90465, 20555, 20554, 90475 K#: K24308

1862 3 A (4) 2-3/8” IF Lift Subs

K#: K24304

1863 3 A (3) 3-1/2” IF Lift Subs

K#: K24298

1864 3 A QTY (4) 2-3/8” IF Lift Subs

Asset# 90415, 0134, 90437,90447 K#: K24311

1865 3 A (5) 2-3/8” IF Lift Subs

K#: K24305

MAST UNIT / ENGINES / PRODUCTION 1866 16 U 1996 61'H Telescoping Mast

Unit w/Ideco Block/Hook Combo 61’H Telescoping Mast, Ram Main Winch, Braden Utility Winch, Ideco DTB75 Travel Block/Hook Combo, 3-Sheave, 26”OD, 1” Line, Operator Console, All Mtd on 40’L x 11’W Double Stacked Skid w/11’L x 11’W Secondary Skid. (BUYER RESPONSIBLE FOR LOADOUT.) VIN/SN: SK11705 K#: K30386

Choice of 9 - Lots 1867-1875 1867 16 U National J-275 Pump p/b

Cummins 6-Cyl Diesel Engine 6 in Intake, 1.5 in Discharge, Triplex Cummins Inline 6 Cylinder Diesel Engine, w/Fluid Kinetics 3,000 PSI Pulsation Dampener, Detroit Diesel Allison Manual Clutch, Control Panel, & Gauge Cluster, All On 24'L x 8'W Skid. VIN/SN: 1140 K#: K30342

1868 16 U National J-165 Pump p/b CAT

6-Cyl Diesel Engine 6 in Intake, 1.5 in Discharge, Triplex, Cat Inline 6 Cylinder Diesel Engine, w/Fluid Kinetics 5,000 PSI Pulsation Dampener, CAT Manual Clutch, Control Panel, Gauge Cluster, Mtd Pressure Bottle w/Fisher Controls 10 PSI Regulator, All On 20'L x 11'W Skid. VIN/SN: 14867-D K#: K30343

1869 16 U National J-165 Pump p/b

Cummins 6-Cyl Diesel Engine 4 in Intake, Triplex Cummins Inline 6 Cylinder Diesel Engine, 4,723 PSI Block, w/Oteco 5,000 PSI Pressure Relief Valve, Fluid Kinetics 5,000 PSI Pulsation Dampener, Manual Clutch, Control Panel, Gauge Cluster. VIN/SN: 14861 K#: K30340

1870 16 U National J-165 Pump

4.25 in Intake, 2.37 in Discharge, Triplex, 5,000 PSI Triplex, Belt Drive, p/b 150 HP Pacemaker Electric Motor, All On 10'L x 2'7"W Skid. K#: K30317




1871 16 U National J-100 Pump p/b CAT 6-Cyl Diesel Engine 4 in Intake, 2 in Discharge, Triplex Cat Inline 6 Cylinder Diesel Engine, 5,000 PSI Block, w/Fluid Kinetics 5,000 PSI Pulsation Dampener, Twin Disc Manual Clutch, Control Panel, & Gauge Cluster, All On 20'L x 6'6"W Skid. VIN/SN: 15203-D K#: K30341


4 in Intake, 2 in Discharge, Triplex, 5,000 PSI Triplex, Belt Drive, p/b Baldor Electric Motor, All On 10'L x 3'7"W Skid. VIN/SN: 9843 K#: K30316


3.5 in Intake, 1.75 in Discharge, Triplex, 5,000 PSI Triplex, Belt Drive, p/b 40 HP Elektrim Electric Motor, All On 12'6"L x 5'5"W Skid. UNIT IS DISASSEMBLED. K#: K30318


3.5 in Intake, 1.75 in Discharge, Triplex, 5,000 PSI Triplex, Fluid Kinetics 5,000 PSI Pulsation Dampener, Belt Drive, p/b 40 HP US Electric Motor, All On 15'L x 5'3"W Skid. PLUNGERS ARE DISASSEMBLED. VIN/SN: 9155 K#: K30319

1875 16 U National J-60 Pump 2 in Intake, 2 in Discharge, Triplex, w/South Gate 5,000 PSI Pulsation Dampener, Murphy Magic Control Panel, Mtd Pressure Bottles, (2) Kimray Gas Regulators, p/b 60 HP GE Electric Motor, All On 15'L x 8'W Skid. VIN/SN: 7527 K#: K30345

Choice of 3 - Lots 1876-1878 1876 16 U Wheatley Bros WBD 100 Pump

p/b Detroit 4-Cyl Diesel Engine 4 in Intake, 4 in Discharge, Duplex, Detroit Inline 4 Cylinder Diesel Engine, 1,300 PSI Block, w/Piping, Manual Clutch, 3’ x 1’3” Toolbox, 3’8”L x 1’1”W x 2’1”H Fuel Tank, p/b Detroit Diesel Inline 4 Cyl Engine, All Mtd On 15’6”L x 5’7”W Skid, OAW 9’. VIN/SN: WDB148 K#: K30356

1877 16 U Gardner Denver 2-RXE Pump

p/b Waukesha 6-Cyl Diesel Engine Inline 6 Cylinder Diesel Engine, Piping, Mtd Pressure Bottles, Air Fin Circulation Radiator, Control Panel, Gauge Cluster, p/b Waukesha Inline 6 Cyl Diesel Enging, All Mtd On 22’L x 8’W Skid, OAW 11’. ENGINE IS MISSING STARTER. VIN/SN: 205328 K#: K30355

1878 16 U Gardner Denver RLB Pump

w/Mtd Pressure Bottles, Piping, Kimray 4,000 PSI Regulator, All Mtd On 12’L x 8’W Skid w/8’H Canopy. UNIT IS MISSING DRIVE COMPONENT. VIN/SN: 447307 K#: K30369




Choice of 2 - Lots 1879-1880 1879 16 U (1) PE Myers & Bros Injection

Pump w/Mtd Pressure Bottle, 4”ID Connection Port, & Piping, All On 6’6”L x 3’8”W Skid. UNIT DOESN’T HAVE DRIVE COMPONENT. VIN/SN: 73-117 K#: K30365

1880 16 U (1) PE Myers & Bros Injection

Pump w/Mtd Pressure Bottle, 4”ID Connection Port, & Piping, All On 6’6”L x 3’8”W Skid, Comes w/Spare Pump & Skid, S/N 69-179. UNIT DOESN’T HAVE DRIVE COMPONENT. VIN/SN: 73-102 K#: K30366

Choice of 2 - Lots 1881-1882 1881 16 U Vac Skid p/b Detroit 8-Cyl

Diesel Engine Detroit Diesel 8 Cylinder Diesel Engine K#: K30322

1882 16 U Air-X-Changer 42-VV

Air Exchanger w/Radiator Fins, (2) 150 PSI Pressure Bottles, (1) 135 PSI Pressure Bottle, (1) 200 PSI Pressure Bottle, Piping w/Valves & Connection Ports, Mtd Control Panel, All Mtd On 13’6”L x 8’W Skid. VIN/SN: 950153 K#: K30358

Choice of 6 - Lots 1883-1888 1883 16 U Waukesha H2476 8-Cyl Diesel

Engine 8 Cylinder Diesel Engine. UNIT IS MISSING STARTER. VIN/SN: 60178 K#: K30354

1884 16 U Waukesha F1905GRU 6-Cyl

Diesel Engine Inline 6 Cylinder Diesel Engine, Twin Disc Manual Clutch. UNIT IS MISSING STARTER. VIN/SN: 70368 K#: K30352

1885 16 U Waukesha Cadet 6-Cyl Diesel

Engine Inline 6 Cylinder Diesel Engine. UNIT IS MISSING STARTER. K#: K30351

1886 16 U Waukesha 6-Cyl Diesel Engine

Inline 6 Cylinder Diesel Engine, w/Control Panel. UNIT IS MISSING STARTER. K#: K30353

1887 16 U Detroit 6-Cyl Diesel Engine

Detroit Inline 6 Cylinder Diesel Engine, Manual Clutch. UNIT IS MISSING STARTER & EXHAUST STACK. VIN/SN: 6A406547 K#: K30331




1888 16 U General Motors 6057-C 6-Cyl Diesel Engine Inline 6 Cylinder Diesel Engine. VIN/SN: 6A-108239 K#: K30332

Choice of 2 - Lots 1889-1890 1889 16 U Pump Jack Motor

w/3-Groove Drive Pulley, Weight Wheel, & Cooling System. MISSING COOLING FAN. K#: K30305

1890 16 U Fairbank Morse Pump Jack

Motor w/4-Groove Drive Pulley, Weight Wheels, & Cooling System. K#: K30301

Choice of 2 - Lots 1891-1892 1891 16 U Gardner Denver AVSARB Skid

Mounted Electric Air Compressor p/b GE Type KF Electric Motor. VIN/SN: A9GA999 K#: K30307

1892 16 U Quincy 350 Skid Mounted Air

Compressor p/b 30 HP Baldor Electric Motor w/3-Groove Drive Pulley, Mtd Pressure Bottle w/2”ID Ports, Mtd Control Panels, All Mtd On 7’L x 3’9”W Skid. VIN/SN: 20031190100 K#: K30357

1893 16 U 2310' (77) Jts 4-3/16” Drill Pipe 2,310' Avg Total Length, Various # Ratings, w/NC35 Connections, 4-3/16" Avg OD Joints. K#: K30399

Choice of 3 - Lots 1894-1896 1894 16 U 9455' (305) Jts 3-1/2" Drill Pipe

9,455' Avg Total Length, Various # Ratings, w/3-1/2" XH Connections, 4-5/8" Avg OD Joints. K#: K30397

1895 16 U 2760' (92) Jts 3-1/2” Drill Pipe

2,760' Avg Total Length, Various # Ratings, w/3-1/2" Regular Connections, 4-3/8" Avg OD Joints. K#: K30401

1896 16 U 2250' (75) Jts 3-1/2” Drill Pipe

2,250 Avg Total Length, Various # Ratings, w/3-1/2" Regular Connections, 4-1/8" Avg OD Joints. K#: K30400

Choice of 2 - Lots 1897-1898 1897 16 U 5500' (164) Jts 5-1/2” Wash

Pipe 5,500 Avg Total Length, Various # Ratings. K#: K30402




1898 16 U 2158' (56) Jts 5-1/2" Wash Pipe Joints 2,158' Avg Total Length, Various # Ratings. DOES NOT INCLUDE THE GALVANIZED PIPE SHOWN. K#: K30405

1899 16 U (1) 47'L x 4-1/2” Wash Pipe

w/Cut Lip Guide Pipe 6-5/8"OD x 6"ID. LISTING IS FOR ONE STRING OF THIS PARTICULAR PIPE. DOES NOT INCLUDE ANY OTHER PIPE IN THIS LISTING. K#: K30398

Choice of 2 - Lots 1900-1901 1900 16 U 550' (14) Jts 4-1/2" Tubing

Joints 550 Avg Total Length, Various # Ratings. K#: K30404

1901 16 U Qty (4) Various ID Tubing

Joints (1) 38'L x 7-5/8", (1) 21'L x 7", (2) 39'8"L x 8-5/8". THIS LISTING IS FOR ONLY THESE 4 JOINTS. DOES NOT INCLUDE OTHER PIPE SHOWN. K#: K30403

1902 16 U Qty (7) ASTM A53A Schedule

40 Galvanized Pipe Joints 21'L x 3"OD. DOES NOT INCLUDE ANY OTHER PIPE SHOWN. K#: K30406

Choice of 3 - Lots 1903-1905 1903 1 C 2013 Stagecoach 28’6”L T/A

GN Oil/Gas Separator Trailer 2012 NTPV 30x120 Separator, 1440-PSI, Manifold, w/Spare Iron, Valves, & Misc, ST235/85R16 Tires (Missing Gooseneck Connection) (Lic# TX-587405J) VIN/SN: 5NYGU2024DNSC6401 K#: K25705*

1904 1 C 2006 TopHat 33’L T/A GN

Oil/Gas Separator Trailer 2007 JW Williams 30" x 10'L Separator, 1440 PSI, Manifold, Kimray Air Valve, Nu-Flu Mc-II Flow Analyzer, Landing Gear, ST235/85R16 Tires (Missing Gooseneck Connection) (Lic# OK-5010JA) VIN/SN: 4R7G024266T072160 K#: K25711*

1905 1 C 2007 Norris 23’L x 8’6”W T/A

Oil/Gas Separator Trailer 2010 Wadsworth Vertical Separator, Bumper-Pull, 235/85R16 Tires (Lic# TX-54591E) VIN/SN: 1NUS18287C007A50 K#: K25713*

Choice of 5 - Lots 1906-1910 1906 1 C 2011 Shopbuilt 35’L x 8’W T/A

Flare Stack Trailer Bumper-Pull, 27'L Flare w/Winch, (2) Leveling Jacks, Toolbox w/Battery, ST205/75R15 Tires (Lic# OK-1948KC) VIN/SN: FTUSFN32NBS630061 K#: K25702*




1907 1 C 2011 Shopbuilt 35’L x 8’W T/A Flare Stack Trailer Bumper-Pull, 38'L Flare w/1000# Winch, Toolbox, ST205/75R15 Tires (Missing BOTH Front Tires) (Lic# OK-8750JZ) VIN/SN: FTUSFN32NBS640022 K#: K25704*

1908 1 C 2013 Shopbuilt 22’L x 8’W T/A

Flare Stack Trailer Bumper-Pull, 24'L Flare w/Winch, (4) Leveling Jacks, Steel Deck, ST225/75R15 Tires (Missing (1) Front Tire) (Lic# TX-064016H) VIN/SN: TR207445 K#: K25709*

1909 1 C 2013 Shopbuilt 22’L x 8’W T/A

Flare Stack Trailer Bumper-Pull, 25'L Flare w/Winch, (4) Leveling Jacks, Steel Deck, ST225/75R15 Tires (Lic# OK-460021) VIN/SN: 20130584808C K#: K25701*

1910 1 C 2013 Summit 6x60 37’L T/A

Flare Stack Trailer VIN/SN: 4S9GF2222DC297108 K#: K22121

Choice of 3 - Lots 1911-1913 1911 2 C 2012 Titan CF0828 8'W x 28'L

T/A Gooseneck Flare Trailer w/ 7000# Axles, Elec Brakes, 235/80R16, Manual Winch VIN/SN: 4TGF28200C1060828 K#: K018462

1912 2 C 2014 TWI 7'W x 22'L T/A Flare Trailer w/ Hyd Lift, Retractable Stabilizers, Racking Boards, 7000# Axles, Elec Brakes, Ball Hitch, Spring Susp, 235/80R16 VIN/SN: 4T9C1B227EF071049 K#: K018465

1913 2 C 2011 Big Tex 10OA-16 8'W x

16'L T/A Flare Trailer w/ Emergency Shut Off Control Panel, Manual Winch , Zareba 15 Mile Elec Controller, Ball Hitch, Elec Brakes, Spring Susp, 225/75D15 VIN/SN: 16VFX1629B2H87369 K#: K018464

Choice of 5 - Lots 1914-1918 1914 16 U Ideal Type F NSCO Swivel

4 Thread Per Inch Bottom Connection, 3"ID Top Connection, w/Lifting Assy. VIN/SN: 147D003 K#: K30346

1915 16 U Ideal Type U Swivel

4 Thread Per Inch Bottom Connection, 4"ID Top Connection, w/Lifting Assy. VIN/SN: 7005 K#: K30347

1916 16 U Oil Well S5-200 Swivel

4 Thread Per Inch Bottom Connection, 4"ID Top Connection, w/Lifting Assy. K#: K30349




1917 16 U Brewster 4-SX Swivel 4" Square Bottom Connection, 3"ID Top Connection, w/Lifting Assy & Quad Roller Bushing. VIN/SN: S7331 K#: K30348

1918 16 U IISA King Swivel

4 Thread Per Inch Bottom Connection, 4"ID Top Connection, w/Lifting Assy. VIN/SN: 4 K#: K30350

Choice of 4 - Lots 1919-1922 1919 16 U 28’L x 12’D Round Tank

Overall Dimensions 30’L x 12’6”W x 14’H, Comes w/(1) Stair Set Behind Tank. (BUYER RESPONSIBLE FOR LOADOUT) K#: K30382

1920 16 U 27'L x 6'D Round Tank

OAL 33’. K#: K30336

1921 16 U 17’L x 7’6”D Round Tank

Single Compartment, OAL 20'. K#: K30344

1922 16 U 25'L Separator Tank

w/2” & 3” ID ports, Rear Hatch, & Temp Gauge, OAL 25’. K#: K30362

Choice of 2 - Lots 1923-1924 1923 2 AC 3" IPS DR-11 X 1080' Poly Pipe

(UNUSED) PE4710, ASTMF2619, API-15LE, C-1, WTXL4 K#: K018440

1924 2 AC 3" IPS DR-11 X 1080' Poly Pipe

(UNUSED) PE4710, ASTMF2619, API-15LE, C-1, WTXL4 K#: K018441

END OF SALE

THANK YOU FOR YOU PARTICIPATION

JOIN US DECEMBER 1 FOR ANOTHER

KRUSE ENERGY VIRTUAL AUCTION!


SEPTEMBER 16-17, 2021 LOC TITLE LOC TITLE


START OF FEATURED AUCTION ALL TIMES CENTRAL

Items Sell: 9:00 AM-9:05 AM

1 E Pulsair DS200 Air Compressor K#: K22150

2 V (3) Fuel Tanks

(1) Square, (1) L-Shaped, (1) L-Shaped Fuel Tank/Tool Box Combo K#: K018493

16 U Pump Master Control Panel

Fuji Electric 100 HP 150 Amp Panel, Buss Connections, VFD Controls, Display, w/Electrical Cable Leads. K#: K30330

16 U US Electric Motors 150 HP Electric

Electric Motor w/2-1/4” Keyshaft. VIN/SN: 84268810 K#: K30333

1 I Gravely Assorted Attachments Home

& Garden (2) Hoods, & (2) Safety Guards. K#: K32505

1 I Standard Transformer Co. 1,500kVA Transformer Electrical Connections, 100 Gallon Reservoir, Cooling Fins, Overall Dimensions 6'L x 5'W x 8'H. VIN/SN: PDA0069 K#: K32557

2 F (2) L-Shaped Fuel Tanks

w/ (1) Pump K#: K018498

3 A 2016 Model NE-490 Blasting

Cabinet S/N: N/A, 110-Volt, W/ Stand K#: K27624

3 A Craftsman Tool Box, Work Bench /

Misc. Chains, Straps, Cables & Shackels Work Bench- 3'H x 2'6"W x 6'L w/ Shelf K#: K015432

1 I Solar Turbines Inc Filters & Drierite

Desiccators (1) Pallet Of Solar Turbine 17”L x 2-1/2”ID Oil Filters, P/N 190181-1, & (1) Pallet Of 16”L Drierite Compartment Desiccator Units. K#: K32565

1 I (3) Baldor 1.5HP Electric Motors

(1) Pallet Containing (3) Crates, Ea w/(1) 1.5HP Baldor Electric Motor. VIN/SN: 35A03-1273 K#: K32575




16 U Quincy 5120 Skid Mounted Air Compressor p/b Waukesha 6-Cyl Diesel Engine Inline 6 Cylinder Diesel Engine, w/(2) Mtd Pressure Bottles, Storage Boxes, Air Fin Recirculating Radiator, p/b Waukesha Inline 6 Cyl Diesel Engine, All Mtd On 17’L x 7’6”W Skid, OAW 9’. VIN/SN: 20040510-0130 K#: K30368

Items Sell: 9:05 AM-9:10 AM 1 I Gravely Assorted Attachments Home

& Garden (1) Hood, (1) Seat, (3) Kohler Engine Gaurds. K#: K32514

1 I (24) Genteq 1/3 HP Electric Motors

115V, Single Phase, Flat Edged Shaft. K#: K32536

1 I Qty Of Epson Powerlite 570 Short

Throw Projectors K#: K32558

2 V (3) Fuel Tanks

(1) Rectangle, (1) L-Shaped w/ Pump, (1) L-Shaped Fuel Tank/Tool Box Combo K#: K08492

1 H (2) Sullivan-Palatek 30DG Air

Compressors 460V, 3Ph, 60HZ, 39Amp, 30HP Motor K#: K22124

1 I Assorted Electrical Control Components w/52"H File Cabinet Assorted Omron Sockets, Wago Relays, Phoenix Buss Connectors, Allen Bradley Relays, Wago Buss Connectors. K#: K32530


& Garden Bladed Wheels & Harrows. K#: K32512

1 I Assorted Electrical Control

Components w/52"H File Cabinet Assorted ASCO, Crompton, & Direct Logic Buss Connectors, Lg Qty Of Assorted IDEC Relays, (1) SEL-700G Generator Protections Relay. K#: K32529

2 V (3) Fuel Tanks

(2) L-Shaped, (1) Rectangle K#: K018491

16 U Quincy 310 Skid Mounted Air

Compressor w/1-Groove Drive Pulley. VIN/SN: 307323 K#: K30339

1 I (1) Baldor 1.5HP Electric Motor

(1) Pallet. VIN/SN: F0811040911 K#: K32579




3 A Drill Press, Battery Charger & Bench Grinder Model DP300L Delta Table Top Drill Press S/N:031641, P/B Electric Motor, NAPA Model 90-150 Automatic Battery Charger, Up to 225 AMPS, 6 & 12 Volt, Electric Bench Grinder W/ Grinding Disc & Wire Wheel, Irwin Drill Bit Assortment VIN/SN: 031641 K#: K27627


& Garden Attachment Mounting Brackets, Rototiller Handles, Assorted Components. K#: K32515

2 J (2) Tulsa Rufnek Winches

K#: K018458


Components w/52"H File Cabinet Cummins Speed Control Units, Assorted ECU's, Assorted Circuit Boards, (1) Tripp-Lite PSU, (1) Woodward Load Sharing Module. K#: K32531

16 U Quincy 5120 Skid Mounted Electric

Air Compressor p/b 25 HP Louis Allis Electric Motor. VIN/SN: 387844 K#: K30308

1 I Assorted Electrical Control Components w/52"H File Cabinet (6) SATEC PM175 Power Meters, (1) Eaton Ellipse ASR 450 PSU, (1) Woodward Potentiometer Panel, (1) Siemens Simatic Panel Display, (1) SEL-700G Generator Protection Relay, (9) Siemens OP 393-III Operating Panels. K#: K32527


& Garden 48"W Plow, & 30"W Cutter Wheel. K#: K32507

2 V 2018 Cleveland 50 Gal Alum Side

Mount Fuel Tank VIN/SN: 066092 K#: K018490*


w/ (1) Pump K#: K018495

1 I Assorted Electric Motors w/Various

Attachments Assorted Electric Motors w/Various Pump & Fluid Movement Attachments. K#: K32577

3 A 7'H x 8'W x 27"D Wooden Home-

Made Work Bench w/ Cabinets Contents Shown Not Included K#: K29161




16 U Skid Mounted Electric Air Compressor p/b 10 HP Louis Allis Electric Motor. K#: K30309

1 P Extendable Forklift Boom

8"OD x 7'L, Fork Pockets 7-5/8"W x 24"L x 2-5/8"H K#: K32362


& Garden (1) Axle Shaft, (1) Tow-Behind Seat w/Steering Wheel, Harrow Blades & Wheels. K#: K32504


& Garden Cutter Shears, Seat, Tow-Behind Wheels, & Axle Shaft. K#: K32516

1 I (2) CWC Air Compressors

3-Groove 19”OD Drive Pulleys. (1) Pallet. VIN/SN: 636370 K#: K32580


w/ (1) Pump K#: K018496

16 U Ramsey Winch w/Spare Winch Drum Ramsey Winch w/Cable, (1) Chain Drive Winch Reel w/Drums & No Cable. VIN/SN: 692 K#: K30409


Components w/52"H File Cabinet (1) Woodward Import/Export Control Module, (1) Woodward Load Sharing Module, (1) Allen Bradley Power Flex 400 Control Panel, (1) Power Logic ION 7750 Control Panel, (1) Siemens OP 393-III Operating Panels, (1) Basier Electric Static Voltage Regulator, (2) Basier Electric Buss Connectors. K#: K32532

2 V (2) Tool Boxes

(1) Job Box, (1) RKI Tool Box K#: K018488


w/ (1) Pump K#: K018500

3 A 15"W x 4'L Fork Attachments w/

Runner Attachments F/ Linde F'Lift K#: K29211




16 U 2013 Pump Master Control Panel Fuji Electric 60 HP 91 Amp Panel, Buss Connections, VFD Control, Display Screen, Skid Mtd. VIN/SN: 06570-3 K#: K30329


Compressor w/2-Groove Drive Pulley. VIN/SN: 290536 K#: K30337

3 A Caged Storage Cabinet w/ Casters

75” W x 29” D x 7’H. Contents Not Incl. K#: K29162


& Garden (3) Bladed Wheels, & (2) Right Angle Gearboxes. K#: K32506

1 I Powerohm 333 Amp Neutral

Grounding Resistor VIN/SN: 00160 K#: K32581

16 U Mixer (Attachment)

7’9”W x 2’8”H w/Hyd Hose Connections. K#: K30390

1 I Gravely Assorted Attachments Home & Garden (1) Hood, & (3) Tow-Behind Axles w/Wheels. K#: K32508

1 I (6) Olsun Electric Corp 25kVA

Transformers 480V At 52A, 120/240V At 208/104A. K#: K32547


w/ (1) Pump K#: K018499


w/ (1) Pump K#: K018494

1 AA Quincy 350 Air Compressor

K#: K28993

3 A 8’x 4’ Steel Work Bench w/ Casters

& Kobalt 6" Vice K#: K29177


Compressor w/2-Groove Drive Pulley. VIN/SN: 974632-2 K#: K30407




3 A Pallet of Winch Parts & 1/4" Air Hose K#: K27071

3 A (3) Sets of Steel Stamps - Letters,

Numbers, Special Charactors K#: K27084

Items Sell: 9:25 AM-9:30 AM 1 I Assorted Allen Bradley Components

12-Bit Analog Input Modules, 12-120VAC Output Modules, Control Logic XT Communications Panel w/Spare Network Cards. K#: K32549


w/ (1) Pump K#: K018401

1 I (3) Precision Electric Pumps &

Assorted Control Panels (1) Pallet Containing Fisher Control Panel, Cummins Control Module, Power Command Control Panel w/Display, Caterpillar Control Panel w/Display. K#: K32568

1 I (8) Prince 3,000 PSI Manual Hyd

Pressure Bottles w/Hoses (1) Pallet. K#: K32576

16 U Quincy Skid Mounted Air Compressor w/2-Groove Drive Pulley. K#: K30338

1 I (3) Gravely Rototillers Home & Garden

(3) Walk-Behind Rototillers, Ea p/b Single Cylinder Gasoline Engine, 28" Cutter Deck w/Right Angle Drive Gearbox, & (1) Tow-Behind Seat w/Axle & Wheels. K#: K32517


& Garden K#: K32504--D1

3 A Makita Chop Saw & Various Sized

Hand Grinder + Misc. Includes Toolbox (DEWALT BENCH GRINDER NOT INCLUDED) K#: K29168


K#: K018497

1 AA Quincy 325M Air Compressor

K#: K28994

3 A (34) 1-3/8” x 1-1/8” Combo Studs,

(19) 1-1/8” x 1-3/8” Combo Studs Approx. (34) 1 3/8” x 1 1/8” Comb. Studs, (19) 1 1/8” x 1 3/8” K#: K30147




16 U Mixer (Attachment) 7’9”W x 2’8”H w/Hyd Hose Connections. K#: K30389


& Garden (2) 51” Shaft Driven Brushes, (2) Tow Behind Seats, (1) Tow Behind Axle, (2) 28” Cutter Decks. K#: K32524

1 I Quincy 370-A Air Compressor

Belt Driven, p/b 15HP Baldor Electric Motor. VIN/SN: 6225270 K#: K32548

1 I 2000 Custom Power BCF1-60-12-120

Battery Charger Charger Inputs: 120V, 1 Phase, 21 Amps, Charger Outputs: 125VDC, 12 Amps, (3) Disconnect Switches, 1'8"W x 1'7"D x 3'H. VIN/SN: 9779 K#: K32546

1 I Gravely Plow & Wheel Attachments

Home & Garden K#: K32501

1 I Assorted Power Sources & Power

Analyzers (1) California Instruments 5001iX 5kVA AC Power Source, (3) MAGTROL 5100 Power Analyzers. K#: K32533

1 I Portable Hyd Power Jack w/Control Block & Hose Leads (1) Pallet. K#: K32574

1 I Assorted Relays, Gauges, & Fuses

(1) Pallet Containing Assorted Qty & Manufacturer Of Relays, Fuses, Murphy Gauges, NAPA Oil Pressure Sending Units, IDEC Relays, CAT Power Relays. K#: K32573

1 I Qty Of Doors w/No Hardware

K#: K32571

1 I Assorted Stellar Electronics

Components Lg Qty Of Stellar ST2500 Data Communicator Modules & Stellar 12V-2.1AH Rechargeable Battery Packs. K#: K32564

16 U Sivalls Tank

Parts Units, 8’L x 3’D & 10’L x 30”D. VIN/SN: 12409 K#: K30377

16 U Illinois Water Treatment Tank

4’D x 5’H Tank, Closed Top. K#: K30323




16 U G.Denver Air Compressors (Parts Only) Gardner Denver Air Compressor Parts Units. K#: K30335

Items Sell: 9:35 AM-9:40 AM 1 I Gravely 52” Mower Home & Garden

Front Attachment Brackets, Rear Hitch Assy, p/b Twin Cylinder Gasoline Engine, Spare Engine Housing, Spare Body Cover, Spare Twin Cylinder Gasoline Engine. K#: K32523

1 I Computer Printer Supplies

Lg Qty Of Assorted Printer Toner Cartridges & Ink. K#: K32535

6 F 186”L x 78”W Spreader Beam

12”H x 8’W Beams. K#: K28071

1 I Gravely Rototiller Blades Home &

Garden K#: K32513

16 U Gomaco 12” Curb Mold For Curb &

Gutter Machine w/Hopper & Mounts. VIN/SN: MC17878-21 K#: K30392

16 U (8) Pressure Tanks Various Pressure Ratings & Manufacturers. K#: K30384

1 I Gravely Rototiller Blade Guards Home

& Garden K#: K32509

1 I Computer Printer Supplies

Lg Qty Of Assorted Printer Fusers, Toner Cartridges, Ink, & Imaging Drums. K#: K32534

1 I (4) Gravely Axle Shafts Home &

Garden 1-1/2" Key Shaft, 25-7/8"L Axle Shaft Housing. K#: K32503

1 I 1980 Trayer Engineering Fused

Vacuum Transformer Transfer Switches, Electrical Connections, 5'L x 3'4"W x 3'D, w/Mounting Feet. VIN/SN: 79219 K#: K32540

2 V 300 Gal Poly Tank

K#: K018487




1 I Assorted Control Panels, Power Factor Controllers, & Disconnect Switches (3) Pallets Containing Allen Bradley Control Panels, Onan Cummins Control Panel, Tank Level Gauge Box, Fuse Boxes, Cutler-Hammer High Voltage Fuses, (1) Eberspacher Electric Motor, & (1) Capstone Turbine Corp Control Panel. K#: K32566

Items Sell: 9:40 AM-9:45 AM 1 I (4) Gravely Rototillers Home & Garden

(4) Gravely Walk-Behind Rototillers, Ea p/b Single Cylinder Gasoline Engine, (3) Tow-Behind Seats. K#: K32525

1 I Simplx 100 Gal Cap Fuel Tank

2'W x 2'D x 3'7"H. K#: K32545

16 U Oil Transfer Pump w/Tank

2’4”W x 7”D x 2’3”H Tank w/Piping, Mtd Transfer Pump, p/b 5 HP Reliance Electric Motor. TANK HAS RESIDUAL OIL IN IT. K#: K30324

16 U Gomaco 24” Curb Mold w/Taper For

Curb & Gutter Machine w/Hopper & Mounts. K#: K30394

16 U Gomaco 18” Curb Mold For Curb & Gutter Machine w/Hopper & Mounts. VIN/SN: MC10927-31 K#: K30391


(3) Gravely Walk-Behind Rototillers, Ea p/b Single Cylinder Gasoline Engine, (1) 28” Cutter Deck. K#: K32521

1 I (5) Gravely Axle Shafts Home &

Garden 1-1/2" Key Shaft, 25-7/8"L Axle Shaft Housing. K#: K32502


(3) Gravely Walk-Behind Rototillers, Ea p/b Single Cylinder Gasoline Engine, (1) 28” Cutter Deck, (1) Tow-Behind Axle w/Wheels. K#: K32518

1 I Zenith Type-1 Control Panel

Relay Board, Zenith 400A Automatic Transfer Switch, All In 2'W x 1'6"D x 5'H Cabinet, w/Square D Breaker Panel, Cutler-Hammer 10kVA Transformer, (2) Spare 300VA GE Transformers, All Mtd On 7'6"L x 2'6"W Skid. VIN/SN: 187367 K#: K32552




1 I Cummins Inline 6 Cyl Diesel Engine (INOP) ENGINE DOES NOT RUN. VIN/SN: 10242214 K#: K32544

1 I Assorted Transformer Blocks & GPU

Modules (1) Pallet Containing Assorted Cutler-Hammer & ABB Transformer Blocks, & (2) GPU 2000R Modules. K#: K32572

16 U Detroit 6-Cyl Diesel Engine

V6 Cylinder Diesel Engine. VIN/SN: DD06D0243524 K#: K30418

Items Sell: 9:45 AM-9:50 AM 1 I Delaval IMO Pump w/Basin

3'7"L x 2'6"W x 2'H Basin, Plumbing, Belt Driven Pump, p/b 20HP Imperial Electric Motor. VIN/SN: 79 3200 K#: K32555

16 U (6) Pressure Tanks

Various Pressure Ratings & Manufacturers. K#: K30383


Curb & Gutter Machine w/Hopper & Mounts. VIN/SN: MC12975-21 K#: K30393

1 I Onan Control Panel 208V, 3 Phase, 1600A Panel, (2) Westinghouse SPBNH Control Panels w/Transfer Switches, Time Control Unit, VFD Control Panels, All In 3'9"W x 4'D x 7'6"H Cabinet. VIN/SN: W886644573 K#: K32550

1 I Assorted Cutler-Hammer Motor

Control Panels K#: K32537


(3) Gravely Walk-Behind Rototillers, Ea p/b Single Cylinder Gasoline Engine, (2) Tow-Behind Seats. K#: K32526


(3) Gravely Walk-Behind Rototillers, Ea p/b Single Cylinder Gasoline Engine, (1) 38” Cutter Deck. K#: K32520

1 I Tramont Corp Flammable Liquids Tank

3'9"W x 4'W x 4'H Tank. VIN/SN: 43911 K#: K32551

2 C Total Rebuild Hydrostatic Test

Pump w/ SC D6000B180 Pump K#: K015049




2 C Hydrostatic Test Pump Control Panel K#: K015048

3 A Grease Gun for 5 Gallon Bucket

K#: K27081


Curb & Gutter Machine w/Hopper & Mounts. VIN/SN: MC17808-21 K#: K30395

Items Sell: 9:50 AM-9:55 AM 1 I Assorted Electrical Control

Components w/52"H File Cabinet (1) Woodward Digital Synchronizer Control, (2) Woodward Load Sharing Modules, (2) Woodward SPM Synchronizer Panels, (1) Woodward Import/Export Control Panel, (2) Woodward Motors, (1) Woodward Circuit Board. K#: K32528

6 F Skidded Fuel Station w/Pump &

Spill Containment 16’4”L x 8’D Tank, Mtd Gas Boy Pump w/Fill Hose & Nozzle, 25’L x 9’W x 4’H Spill Containment, OAL 30’. K#: K28073

1 E Techno Wash AQT 1000 Steam

Cleaner VIN/SN: TW51018 K#: K22149

16 U Gomaco 48” V-Taper Mold For Curb & Gutter Machine w/Hopper & Mounts. VIN/SN: MC12698-21 K#: K30396

1 I (7) Gravely Tow-Behind Axles

w/Wheels Home & Garden K#: K32510


(3) Gravely Walk-Behind Rototillers, Ea p/b Single Cylinder Gasoline Engine, (1) 28” Cutter Deck, (1) Tow-Behind Axle w/Wheels. K#: K32519

3 A ATD 1/2" Drive Torque Wrench -

250 FT. Lbs. K#: K27085

1 I Assorted Qty Of Breaker Panels, Fuse

Boxes, & Disconnect Switches (3) Pallets Containing (2) Empty 5’H x 1’7”W x 6”D Breaker Panels, Assorted Qty Of Fuse Boxes, Breaker Panels, & Electrical Disconnect Switches. K#: K32567

1 I (6) Shaw-Walker Fire Resistant File

Cabinets Ranging From 3'3"H To 4'5"H. CABINET DRAWERS ARE LOCKED, NO KEYS. K#: K32561




1 I (4) Shaw-Walker Fire Resistant File Cabinets 3'3"H. DRAWERS DO NOT HAVE KEYS BUT ARE UNLOCKED. K#: K32563

3 A (2) Strap Wrenches

K#: K27099

3 A (3) Sledge Hammers (1) Hammer

Head K#: K015434

Items Sell: 9:55 AM-10:00 AM 1 I GreenHeck HVAC Unit

Filter Cabinet, Blower Unit, HVAC Connections, 3HP Supply Motor, All In 18'L x 3'10"W x 3'11"H Cabinet. VIN/SN: 17874899 K#: K32553

1 I Gravely Westchester Mower Home &

Garden Front Wheel Drive, Rear Wheel Steer, Front Attachment Coupling, p/b Single Cylinder Gasoline Engine. NO CUTTER DECK, ENGINE IS DISASSEMBLED. K#: K32522

19 Z Lrg Qty Of Heavy-Duty Pad

Locks(UNUSED) Approx. 1299 Locks K#: K29348

19 Z Lrg Qty Of Brass Pad Locks(UNUSED) Approx. 2058 Locks K#: K29347

6 F Skidded Fuel Station w/Pump &

Spill Containment 16’4”L x 8’D Tank, Mtd Gas Boy Pump w/Fill Hose & Nozzle, 25’L x 9’W x 4’H Spill Containment, OAL 30’. K#: K28074

3 A Pedestal Chain Vise w/ Extra Chain

K#: K27080

3 A Ingersoll Rand Air Impact Tool W/

Various Sockets K#: K29176

1 I (6) Shaw-Walker Fire Resistant File

Cabinets 3'3"H. CABINET DRAWERS ARE LOCKED, NO KEYS. K#: K32562

3 A Lrg Qty Of Various Type Hand

Tools Assortment Of Pipe Wrenches (24”-60”) w/Chain Tongues K#: K30249




1 I (2) Onan 4kW Gen Sets (INOP) Ea p/b Onan 2 Cylinder Gasoline Engine, 120/240V Single Phase. VIN/SN: 0575948054 K#: K32559

3 A (2) Kerosene Heaters

(1) Dayton 125000 BTU, (1) Munters 160000BTU K#: K29160

1 I American Battery ABC11-120-20

Electric Battery Charger Disconnect Switches, Inputs: 208-240V, 28A, Single Phase, Outputs: 120V, 20A. VIN/SN: 0201066 K#: K32560

Items Sell: 10:00 AM-10:05 AM 3 A QTY (3) 3-1/4”-2-3/4” Open Bearing

Milltooth Drill Bits W/2-3/8” API REG Conn. (UNUSED) W/Box, (1) 3-1/4” Varel, (1) 2-7/8” Gemini, (1) 2-3/4” Gemini K#: K30012

3 A 6” L2 Open Bearing Mill Tooth Drill

Bit (UNUSED) W/3-1/2” REG Conn. K#: K26094

3 A Varel 5-1/8” LH2 Open Bearing

Milltooth Drill Bit (UNUSED) W/2-7/8” FH Conn. W/Box K#: K30004

3 A Atlas Copco 5-3/4” OHR Open Bearing Milltooth Drill Bit (UNUSED) W/ 3-1/2” REG Conn. W/Box K#: K30002

3 A API 6” BK7 Open Bearing Mill

Tooth Drill Bit (UNUSED) W/3-1/2” REG Conn. K#: K26097

3 A QTY (2) 4-5/8” – 4-1/2” Open

Bearing Milltooth Drill Bits (UNUSED) (1) 4-5/8” W/2-7/8” REG Conn. (1) 4-1/2” Varel L2 W/2-3/8” Short Conn. W/Box K#: K30007

3 A QTY (3) Gemini 4-3/4” Badder XG

TCI Rock Bits W/2-7/8” API REG Pin (UNUSED) W/Box K#: K30017

3 A QTY (3) 3-5/8” Open Bearing

Milltooth Drill Bits W/ 2-3/8” Conn., (1) Varel L2 (UNUSED) W/Box, (1) Gemini (UNUSED) W/Box, (1) Varel L2 K#: K30011

3 A QTY (5) 4-7/8”-4-1/8” 3-Wing Bladed

Drill Bits (4) (UNUSED) K#: K30013




3 A QTY (2) 4-3/4” Open Bearing Milltooth Drill Bits (Unused) (1) Varel 4-3/4” L2 Open Bearing Milltooth W/2-7/8” SHT Conn. (1) Russian 4-3/4” Open Bearing Milltooth W/2-7/8” REG Conn. (UNUSED) W/Box K#: K30006

3 A QTY (4) 3-7/8” Open Bearing

Milltooth Drill Bits W/2-3/8” REG Conn. (1) Varel (UNUSED) W/Box K#: K30009

3 A Varel5-1/8” L2 Open Bearing

Milltooth Drill Bit (UNUSED) W/2-7/8” REG FH Conn. W/Box K#: K30005

Items Sell: 10:05 AM-10:10 AM 3 A API 6-1/8” K-1K Open Bearing Mill

Tooth Drill Bit (UNUSED) W/3-1/2” REG Conn. K#: K26098

3 A Varel 6-5/8” L2 Open Bearing Mill

Tooth Drill Bit (UNUSED) K#: K26087

3 A Varel 6” L2 Open Bearing Mill Tooth

Drill Bit (UNUSED) W/3-1/2” REG Conn. W/Box K#: K26090

3 A API 6” SPEC 7 Open Bearing Mill Tooth Drill Bit (UNUSED) W/3-1/2” REG Conn. K#: K26095

3 A Varel 5-3/4” L2 Open Bearing

Milltooth Drill Bit (UNUSED) W/3-1/2” REG Conn. W/Box K#: K30001

3 A QTY (3) Varel 4-1/8” L2 Open

Bearing Milltooth Drill Bits (UNUSED) W/ 2-3/8” Short Conn. W/Box K#: K30008


Tooth Drill Bit (UNUSED) W/3-1/2” REG Conn. W/Box K#: K26085



3 A QTY (3) 3-3/4”-3-7/8” Varel Open

Bearing Milltooth Drill Bits W/2-3/8” REG Conn. (1) Used 3-3/4”, (1) UNUSED 3-3/4” W/Box, (1) UNUSED 3-3/8” W/Box K#: K30010




3 A API 6” BK7 Open Bearing Mill Tooth Drill Bit (UNUSED) W/3-1/2” REG Conn. K#: K26096





Items Sell: 10:10 AM-10:15 AM 17 Z (2) 2021 44’ FL-8-D Flare Stacks

(Unused) S/N- ICT-1757, ICT-1743. Radiation- 1004 BTU/SF/ HR, Flow Rate- 8MMSCFD, Comb. Efficiency- 98.01, Tip Exit Area- 35.510, Each w/ (2) Wenco 7000 Series In-line Flame Arrestors. Incl. Concrete Bases. K#: K29333

17 Z 40’ & 44’ Flame Stacks (1 Unused)

(1) 2018 FL-8-D, S/N- ICT-1381, Flow Rate- 8M50FD, Tip Exit Area- 35.510 SQIN, Comb. Efficiency- 98.01, Radiation- 1004 BTU/SF/HE, w/ 6” x 150# In-Line Flame Arrestor & 4” x 150# In-Line Flame Arrestor. (1) Unused 40’ FL-6-D, S/N- ICT- 1359, Tip Area Exit- 26.576 SQIN, Comb. Efficiency- 98.15, Radiation- 953 BTU/SF/HR, w/ (2) In-Line Flame Arrestors, Electric Ignition System & Solar Panel K#: K29334

20 Z (2) Scrubber Separator Vessels(UNUSED) (1) 2021 4’ x 10’ Vertical Scrubber 125#MAWP, S/N- ICT 3270, w/ Welded Outlets & Inlets. (1) 2021 48” x 48” Horizontal Flare Scrubber Vessel, 125#MAWP, S/N- NC244, Deck- ¼”, Shell- ¼”, Bottom Thickness- ¼”, w/ Lifting Eyes, Various Welded Ports. Stand Mtd. Lot Incl. Detached Exhaust Port. K#: K29344

3 A 4-7/8” Bit Diamond Point F/ 4-5/8”

Core Barrel Extension K#: K30018

3 A 6-1/8” Open Bearing Mill Tooth Drill

Bit (UNUSED) W/3-1/2" Reg Conn K#: K26099



3 A QTY (4) 3-5/8”-2-3/4” 3-Wing Bladed

Drill Bits K#: K30015

3 A (1) 2-1/4” Dual Cone Milltooth Drill

Bit (6) 3-1/8” Milltooth Cones K#: K30016




3 A Varel 6-5/8” L2 Open Bearing Mill Tooth Drill Bit (UNUSED) W/3-1/2” REG Conn. W/Box K#: K26086



3 A Varel 5-5/8” L2 Open Bearing

Milltooth Drill Bit (UNUSED) W/3-1/2” REG Conn. W/Box K#: K30003

3 A QTY (2) 4-1/2” T&B 3-Wing Bladed

Drill Bits W/2-3/8” Conn. (UNUSED) W/Box K#: K30014

Items Sell: 10:15 AM-10:20 AM 3 A QTY (5) 9-7/8” OD Sealed Bearing

Mill Tooth Drill Bit K#: K26057

3 A QTY (8) 5-3/8” – 4-3/4” Open

Bearing Mill Tooth Drill Bits K#: K26069

3 A QTY (3) 7-7/8” Sealed Bearing Mill

Tooth Drill Bits K#: K26061

3 A QTY (11) 4-3/4” Open Bearing Mill Tooth Drill Bits K#: K26071

3 A QTY (4) 7-7/8”- 7-3/8” Sealed &

Opened Bearing Mill Tooth Drill Bits K#: K26059

3 A QTY (4) 8-5/8”- 7-7/8” Sealed


3 A QTY (9) 6-3/4” – 6” Open Bearing

Mill Tooth Drill Bits K#: K26066

3 A QTY (5) 6-1/4” Open Bearing Mill

Tooth Drill Bits K#: K26063

3 A QTY (8) 6-1/8” – 5-7/8” Open


3 A QTY (7) 6-1/8” – 5-7/8” Open





3 A QTY (6) 6-5/8” – 6-1/8” Drill Bits (5) Open Bearing Mill Tooth Bits, (1) 6-1/8” Paddle Bit K#: K26065

3 A QTY (11) 3-7/8” – 3-3/8" Open


Items Sell: 10:20 AM-10:25 AM 18 Z 30.5’ Aereon Flare Stack (UNUSED)

S/N- F50000 1945, Approx. 2’ ID, 8” & 6” Flanged Outlets, w/ Control Panels, (1) Protego 8” x 150# Flanged Flame Arrestor, (1) Protego 6” x 150# Flanged Flame Arrestor, (1) New York CO. Vane Axial Fan p/b 20HP 3 Phase Baldor Reliance Electric Motor Incl. Misc. Assy. Hardware. K#: K29332

6 F Subdrill MS-V2A Mud Bucket

S/N V2-022. K#: K28064


S/N V2-025. K#: K28066

3 A QTY (10) 4-3/4” – 4-1/4” Open


3 A QTY (10) 4-1/2” – 3-7/8” Open Bearing Mill Tooth Drill Bits K#: K26074

3 A QTY (3) 4-3/8”, 4-1/2”, 4-1/8” Open


3 A QTY (13) 4-3/4” – 5-5/8” Open


3 A QTY (9) 4-1/8”- 3-1/4” Open Bearing

Mill Tooth Drill Bits K#: K26077

3 A QTY (5) 9-1/2”- 8-1/4” Sealed &

Opened Bearing Mill Tooth Drill Bits K#: K26058

3 A QTY (5) 6-3/4”- 6” Sealed & Opened


3 A QTY (5) 6-1/2” – 6-1/4” Open


3 A QTY (8) 4-3/4” – 4-5/8” Open

Bearing Mill tooth Drill Bits K#: K26070




Items Sell: 10:25 AM-10:30 AM 3 A 2" 1502 HP Rubberized Hose

K#: K27078

3 A Drum Rack 26'W x 12'L x 30"H

K#: K23846

1 E Cameron 7” Drill Pipe Ram Blocks

f/11” BOP K#: K22126


S/N V2-029. K#: K28065

3 A 2" 1502 HP Rubberized Hose W/

5/8" Cable Guide 50' Long K#: K23848

1 AA Surplus CAT Engine Parts

K#: K28992

1 AA (6) DBI SALA 4"x 4" Portable Safety

Mast & Lq Qty of Safety Harnesses K#: K28990

13 R QTY (4) Southwest Model 9P-100

Mud Pump Modules W/Studs & Nuts K#: K24928

1 AA Surplus Rig Parts K#: K28991

1 AA (6) DBI SALA 30' SRL''s

K#: K28998

3 A 2" 1502 HP Rubberized Hose W/

5/8" Cable Guide 50' Long K#: K23847

16 U Martin Decker Weight Indicator

(1) Weight Indicator w/Cases & Hose, (2) Weight Pods, (1) Homelite 3” Trash Pump, p/b Single Cylinder Gasoline Engine. K#: K30408

Items Sell: 10:30 AM-10:35 AM 20 Z 2021 Pitts 1000BBl Steel

Production Tank (Oil)(UNUSED) S/N- 1175, MAWP-1602, Deck/Head- ¼”, Shell Thickness- ¼”/3”/16, Bottom/Head- ¼” (NOTE: BUYER MUST BE IN COMPLIANCE WITH OVERSIZED GUIDELINES FOR TRANSPORTATION) K#: K29340

20 Z 2021 Pitts 1000BBl Steel

Production Tank (Oil)(UNUSED) S/N- 1173, MAWP-1602, Deck/Head- ¼”, Shell Thickness- ¼”/3”/16, Bottom/Head- ¼” (NOTE: BUYER MUST BE IN COMPLIANCE WITH OVERSIZED GUIDELINES FOR TRANSPORTATION) K#: K29341




20 Z 2021 Pitts 1000BBl Steel Production Tank (WC)(UNUSED) S/N- 1172, MAWP-1602, Deck/Head- ¼”, Shell Thickness- ¼”/3”/16, Bottom/Head- ¼” (NOTE: BUYER MUST BE IN COMPLIANCE WITH OVERSIZED GUIDELINES FOR TRANSPORTATION) K#: K29342


Production Tank (Oil)(UNUSED) S/N- 1174, MAWP-1602, Deck/Head- ¼”, Shell Thickness- ¼”/3”/16, Bottom/Head- ¼”. Equip. w/ 8” x 36” Drip Pot MAWP-125# S/N- ICT-3383 (NOTE: BUYER MUST BE IN COMPLIANCE WITH OVERSIZED GUIDELINES FOR TRANSPORTATION) K#: K29338

20 Z 2021 ICT 8’ x 42’ Vapor Recovery

Tower(UNUSED) MAWP- 125#, S/N- ICT-3234, w/ Lifting Eyes, & Various Welded Inlets & Outlets. K#: K29343


Production Tank (WB)(UNUSED) S/N- 1171, MAWP-1602, Deck/Head- ¼”, Shell Thickness- ¼”/3”/16, Bottom/Head- ¼”. Equip. w/ 8” x 36” Drip Pot MAWP-125# S/N- ICT-3385 (NOTE: BUYER MUST BE IN COMPLIANCE WITH OVERSIZED GUIDELINES FOR TRANSPORTATION) K#: K29339

20 Z 2021 Pitts 1000BBl Steel Production Tank (Water)(UNUSED) S/N- 1170, MAWP-1602, Deck/Head- ¼”, Shell Thickness- ¼”/3”/16, Bottom/Head- ¼”. Equip. w/ 8” x 36” Drip Pot MAWP-125# S/N- ICT-3310 (NOTE: BUYER MUST BE IN COMPLIANCE WITH OVERSIZED GUIDELINES FOR TRANSPORTATION) K#: K29337

3 A 2014 Logan PS85 2.5 Trailer MTD

Power Swivel S/N: 0291414, P/B Cat C4.4 4-Cylinder Diesel Engine S/N: 44425530, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Honor HPU, (2) HYD Tanks, Speedair Air Compressor w/Air Volume Tank, HYD Hose W/HYD Reel, Logan 5,000# Control Station, Roller Stator HYD Utility Winch, Toolbox, Battery Box, Spare Tire Mount W/Spare Tire, All MTD on 2014 Ameritrail MFG 6’-4”W x 14’L T/A Bumper Pull Trailer, W/Steel Deck, 2-5/16” Adjustable Hitch, Bull Dog Landing Gear, Spring Suspension, 235/85R16 Tires, Steel Wheels (MS-M4546S) VIN/SN: 17YBP142XEB057074 K#: K24551

3 A Assorted Sizes of Hydraulic Hoses

(2) 5100PSI 1-1/16", Other assorted sizes K#: K27083




3 A EVCO 2.5 Trailer MTD Power Swivel S/N: N/A, P/B Detroit 4-Cylinder Diesel Engine, S/N: N/A, W/ Electric Start, Radiator, Gauges, Exhaust Muffler (1,136.2 Metered Hours) W/ HPU, Air, HYD & Fuel Tanks, Toolbox, Battery Box, HYD Hose W/HYD Reels, EVCO 5,000# Control Station, Warn Pro Vantage 4500# Electric Utility Winch, Spare Tire Mount W/Spare Tire, All MTD on EVCO 5’W x 15’L T/A Bumper Pull Trailer, W/Steel Deck, 2-5/16” Hitch, Landing Gear, Spring Suspension, 235/80R16 Tires, Steel Wheels (MS-F6380R) VIN/SN: 7246269-3 K#: K24555

3 A Lrg Qty Of Hydraulic Hoses (Poor

Condition) K#: K30239

3 A Bowen S-3.5 Skid MTD Power

Swivel S/N: 2647, P/B Detroit 6V-92 Diesel Engine S/N: N/A, W/Electric Start, Radiator, Gauges, Exhaust Muffler (Hours Unverifiable) HPU, HYD Hose W/HYD Reels, Manual Crank Winch, Air, HYD & Fuel Tanks, 5,000# Control Station, All MTD on 7’W x 14’L Streel Skid, Skidded VIN/SN: 2647

Items Sell: 10:35 AM-10:40 AM 19 Z (Qty 70) Split Core Uni-Directional

Transducers(UNUSED) 4-20 mA Output DC K#: K29346

17 Z (2) 2021 30”x 10’ Separator Vessels(UNUSED) MFR.- Pitts, S/N- NC198, NC197, MAWP- 125#, Deck/Head-3/8”, Shell- 3/8”, Bottom/Head- 3/8”, w/ Lifting Eyes, & Various Welded Inlets & Outlets, Incl. (2) Concrete Bases & Lot of Drip Pots. K#: K29335

17 Z (3) 2021 48” x 10’ Separator

Vessels(UNUSED) Mfr.- Pitts, S/N- NC226, NC229, NC225, MAWP-250#, Deck/Head-1/2”, Shell-1/2”, Bottom/Head-1/2”, Various Welded Inlets & Outlets Incl. (1) 4” x 150# Flanged Outlet & (2) 6” x 150# Flanged Outlet. Incl. (3) Concrete Bases & Lot of Drip Pots. K#: K29336

16 U Pump Jack Motor

w/3-Groove Drive Pulley, Weight Wheel, & Cooling System. K#: K30302

20 Z (2) Peakflow 2.5” Roper Type

Transfer Pumps(UNUSED) M/N- 22-20210909, Each p/b 5HP Electric Motor, Equip. w/ 2.5” Flanged Inlet & Outlet Ports. Both Stand Mtd. K#: K29345




3 A EVCO 2.5 Trailer MTD Power Swivel S/N: N/A, P/B Detroit 4-Cylinder Diesel Engine, S/N: N/A, W/ Electric Start, Radiator, Gauges, Exhaust Muffler (1,070 Metered Hours) W/ HPU, Air, HYD & Fuel Tanks, Toolbox, Battery Box, HYD Hose W/HYD Reels, EVCO 5,000# Control Station, Warn Pro Vantage 4500# Electric Utility Winch, Spare Tire Mount W/Spare Tire, All MTD on EVCO 5’W x 15’L T/A Bumper Pull Trailer, W/Steel Deck, 2-5/16” Hitch, Landing Gear, Spring Suspension, 235/80R16 Tires, Steel Wheels (MS-G2941S) VIN/SN: 7246269-4 K#: K24553

3 A EVCO 2.5 Trailer MTD Power Swivel

S/N: N/A, P/B Detroit 4-Cylinder Diesel Engine, S/N: N/A, W/ Electric Start, Radiator, Gauges, Exhaust Muffler (941.5 Metered Hours) W/ HPU, Air, HYD & Fuel Tanks, Toolbox, Battery Box, HYD Hose W/HYD Reels, EVCO 5,000# Control Station, Warn Pro Vantage 4500# Electric Utility Winch, Spare Tire Mount W/Spare Tire, All MTD on EVCO 5’W x 15’L T/A Bumper Pull Trailer, W/Steel Deck, 2-5/16” Hitch, Landing Gear, Spring Suspension, 235/80R16 Tires, Steel Wheels (MS-F6379R) VIN/SN: 7246269-5 K#: K24554

3 A 2014 Logan PS85 2.5 Trailer MTD Power Swivel P/B Cat C4.4 4-Cylinder Diesel Engine S/N: 44425537, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Honor HPU, (2) HYD Tanks, Speedair Air Compressor w/Air Volume Tank, HYD Hose W/HYD Reel, Logan 5,000# Control Station, Roller Stator HYD Utility Winch, Toolbox, Battery Box, Spare Tire Mount W/Spare Tire, All MTD on 2014 Ameritrail MFG 6’-4”W x 14’L T/A Bumper Pull Trailer, W/Steel Deck, 2-5/16” Adjustable Hitch, Bull Dog Landing Gear, Spring Suspension, 235/85R16 Tires, Steel Wheels (MS-M4545S) VIN/SN: 17YBP1428EB056716 K#: K24557

16 U Pump Jack Motor

w/3-Groove Drive Pulley, Weight Wheel, & Cooling System. K#: K30304

16 U Gaso Pump P33J Pump p/b 4-Cyl

Diesel Engine 3 in Intake, 2 in Discharge, Triplex, Inline 4 Cylinder Diesel Engine, Triplex Block, Belt Driven, Twin Disc C11CHP3 Manual Clutch, p/b Inline 4 Cyl Diesel Engine, All Mtd On 9’L x 4’6”W Skid, OAW 7’ VIN/SN: 5979 K#: K30367

16 U Arrow Pump Jack Motor

w/4-Groove Drive Pulley, Weight Wheel, Manual Clutch, & Cooling System. K#: K30303




16 U Pump Jack Motor w/3-Groove Drive Pulley, Weight Wheel, Manual Clutch, & Cooling System. K#: K30306

Items Sell: 10:40 AM-10:45 AM 16 U (3) Reducer Pulley Boxes

K#: K30313

16 U Lufkin N1202C Gear Box

w/1-1/2 HP Electric Motor & Piping. VIN/SN: 14105 K#: K30311

16 U (2) Tank Skids w/External Pressure

Bottles w/Regulator & Pressure Relief Valves. VIN/SN: V5473 K#: K30375

16 U Discharge Iron & Wheel Valve Lot

7-1/16” Flange Spools w/2-1/16” Crossover Valves, Change Over Spools, Flanged Tee Spools. K#: K30385

16 U Lufkin N1202C Gear Box

w/2 HP Electric Motor & Piping. VIN/SN: 14104 K#: K30310

16 U (1) PE Myers & Bros Injection Pump w/Mtd Pressure Bottle, 4”ID Connection Port, & Piping, All On 6’6”L x 3’8”W Skid. UNIT DOESN’T HAVE DRIVE COMPONENT. VIN/SN: 73-97 K#: K30364

3 A EVCO/Bowen 2.5 Trailer MTD

Power Swivel S/N: 2083, P/B Cummins 4-Cylinder Diesel Engine S/N: 46548735, W/Electric Start, Radiator, Gauges, Exhaust Muffler (453 Metered Hours) W/EiP HPU, Radio Controlled, Air, HYD, & Fuel Tanks, Toolbox, Battery Box, HYD Hose W/HYD Reel, Logan 5,000# Control Station, Warn Pro Vantage 4500# Electric Utility Winch, Spare Tire Mount W/Spare Tire, All MTD on EVCO 5’W x 15’L T/A Bumper Pull Trailer, W/Steel Deck, 2-5/16” Hitch, Landing Gear, Spring Suspension, 235/85R16 Tires, Steel Wheels, Radio Controlled, (MS-C7326R) VIN/SN: 281 K#: K24552

3 A EVCO 2.5 Trailer MTD Power Swivel

S/N: N/A, P/B Detroit 4-Cylinder Diesel Engine, S/N: N/A, W/ Electric Start, Radiator, Gauges, Exhaust Muffler (Hours Unverifiable) W/ HPU, Air, HYD & Fuel Tanks, Toolbox, Battery Box, HYD Hose W/HYD Reels, EVCO 5,000# Control Station, Ramsey HYD Utility Winch, Spare Tire Mount W/Spare Tire, All MTD on EVCO 5’W x 15’L T/A Bumper Pull Trailer, W/Steel Deck, 2-5/16” Hitch, Landing Gear, Spring Suspension, 235/80R16 Tires, Steel Wheels (MS-G2940S) NOTE: Engine run video shows Kruse Sticker # K24556. Kruse Sticker # was changed to K27630 after unit was painted. VIN/SN: 20534 K#: K27630




16 U (2) Tank Skids w/External Pressure Bottles w/Regulator Valves & Directional Flow Blocks. K#: K30373


Bottles w/Regulator & Pressure Relief Valves. K#: K30380

16 U (1) PE Myers & Bros Injection Pump

w/Mtd Pressure Bottle, 4”ID Connection Port, & Piping, All On 6’6”L x 3’8”W Skid. UNIT DOESN’T HAVE DRIVE COMPONENT. VIN/SN: 73-41 K#: K30363



Items Sell: 10:45 AM-10:50 AM 16 U (10) Misc Pressure Bottles

Various PSI Ratings & Manufacturers. VIN/SN: 6695 K#: K30381

16 U Fluid Transfer Skid Piping, Mtd Insulated Pressure Bottle, Gear Pump, p/b 1 HP Electric Motor, 4x3 Centrifugal Pump, p/b Electric Motor, Smith Meters Flow Counter w/Display, Mtd Control Panel, All Mtd On 8’4”L x 6’W Skid. K#: K30371

16 U Amarillo Gear Box

50 HP At 1760 RPM, Right Hand Drive. VIN/SN: 1BL17436 K#: K30320

3 A 4 9/16” OD Washdown Cutter

Dressed w/ T- Dog & 4-1/2" WP Conn K#: K30155

16 U Dampener & Discharge Iron

(1) 5,000 PSI Dampener, (1) 3,000 PSI Dampener, 2”ID Iron w/Various ID Flange Connections. K#: K30321

3 A 2" YVC Ball Valve 5M (Unused)

K#: K015427

3 A 5-9/16” OD Washdown Cutter

Dressed T -Dog w/ 5-1/2" WP K#: K30158


Dressed w/ T-Dog w/ 5-1/2" WP Conn K#: K30157




16 U (2) Tank Skids w/External Pressure Bottles w/Regulator Valves & Directional Flow Block. K#: K30374


Bottles w/Regulator Valve & Flow Control Block. VIN/SN: 3219 K#: K30379



16 U 2” Check Valves & 2” Flow Control

Valves K#: K30414

Items Sell: 10:50 AM-10:55 AM 6 F STW Customs Dual Stage Fuel

Scrubber Skidded, Seller Asset SCR0052. K#: K28044

6 F STW Customs Dual Stage Fuel


6 F STW Customs Dual Stage Fuel Scrubber Skidded, Seller Asset SCR0066. K#: K28040
















Ratchet Pawl Assy. Dressed f/ 2-7/8” CS & PH6 & Extra Pawl Set K#: K29139


Dressed w/ T- Dog w/ 4-1/2" WP Conn K#: K30156

3 A 4-9/16” OD Wash Down Cutter

Ratchet Pawl Assy. Dressed F/ 2-3/8" CS PN# H2L3480C K#: K29131

Items Sell: 10:55 AM-11:00 AM 6 F STW Customs Dual Stage Fuel


3 A 4-9/16” Washdown Cutter Ratchet

Pawl Assy (Not Assembled) PN#H2L3480C Rest Springs, (2) Spring Retainers, (4) Races (2 Unused) (2) Bearings, Cap Screws, (3) Slip Dog Sets, Bowl, Ratchet Pawl, Spring Cap Screws K#: K29133






6 F 2011 Allmand MXL8K Light Tower

(INOP) S/N 0013MXL11, Marathon Synchronous Pancake AC Generator, M/N 201CSA5420, S/N 698592, 1 Phase, 8kW, 8kVA, 120/240V, 66.7/33.3A, p/b Kubota D1105 3 Cylinder Diesel Engine, S/N AP0971, Metered Hours Unk, Control Panel w/Gauges & Outlets, Mtd Fuel Tank, Manually Telescoping Mast w/(4) Lights, All On S/A Trailer Chassis, Manual Jack, (2) Leveling Jacks, Safety Chains, ST225/75R15 Tires w/Steel Wheels, Seller Asset LT0426, VIN TAG MISSING. MISSING BATTERY & STARTER ASSY. **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 0013MXL11 K#: K28067







3 A Drill Pipe Float Valve, Flapper Valve

(UNUSED) 3.5IF Model F Float Valve, 4R Model G Flapper Valve, K#: K27072

3 A 4-9/16” OD Wash Down Cutter

Ratchet Pawl Assy. Dressed F/ 2-3/8" CS PN- H2L3480C K#: K29132

16 U (3) 2-1/16” 5,000 PSI Gate Valves

K#: K30413


Ratchet Pawl Assy. Dressed F/ 2-3/8"CS & PH-6 PN- H213501 & (2) Sets Of Ratchet Pawls. C 3.125-3.437 & C 3.437-3.687 K#: K29138

Items Sell: 11:00 AM-11:05 AM 16 U (2) Reducer Pulley Boxes

K#: K30315

16 U 2” & 2-3/8” Discharge Iron Gate

Valves K#: K30412

16 U (5) 2-1/16” Valves & Assorted

Downhole Tools (1) Pallet Of Valves & (1) Pallet Of Tools. K#: K30416

16 U (2) Reducer Pulley Boxes

K#: K30314

1 I (5) Qmark 7.5 kW Space Heaters

480V, 22 Amp, 3 Phase. K#: K32538

16 U (3) Reducer Pulley Boxes

One Drive Pulley Assy Is Damaged. K#: K30312

1 I (1) Fluid Transfer Station

(2) Pressure Bottles, Plumbing, ITT Neo-Dyn Adjustable Differential Pressure Switch, All On 28” x 30” Skid. K#: K32569




1 I (1) Fluid Transfer Station (2) Pressure Bottles, Plumbing, ITT Neo-Dyn Adjustable Differential Pressure Switch, All On 28” x 30” Skid. K#: K32570

16 U 22”-36” Speed Shore Trench Rails

w/(2) 1-1/2”ID Stainless Valves K#: K30411

3 A AOT HYT 150-Ton Slip-Type


16 U (4) Stainless Valves, (1) Kimray

Regulator, & (3) Subs K#: K30417

16 U (10) 2-1/16” 2,000 PSI Gate Valves

K#: K30415

Items Sell: 11:05 AM-11:10 AM 1 I (2) Elmac Technologies 100MM Flame

Arrestors VIN/SN: 11193 K#: K32556

16 U (1) Meter Run

2-3/8” Flanged & Threaded Ends, ABB Transmitter Control Panel, Kimray 2,000 PSI PDC Valve. K#: K30327

16 U (1) Meter Run 2” 200 Hammer Union Ends, Kimray 2,000 PSI PDC Valve, Kimray 2,000 PSI Gas Regulator. K#: K30334

16 U Cameron 13-5/8” 3,000 PSI Single

Blowout Preventer w/Flange x Port Adapter. VIN/SN: 900QRC K#: K30370

16 U (1) Meter Run

3-1/16” Flanged Ends, Dynapak Metering Box, Emerson Actuating Valve. K#: K30325

1 I (4) TCI Stainless Steel 4”ID 150PSI

Valves VIN/SN: 068325-03 K#: K32554

1 I (1) 36”ID Flange x Flange Flex Fitting

(1) Pallet. K#: K32578

16 U (1) Meter Run

2” Flanged Ends, Emerson Actuating Valve, Topworx Valve Position Identifier, Interceptor Gas Sampling System. K#: K30328




3 A Lrg Qty Of Various Type Hand Tools Assortment Of Pipe Wrenches (36”-60”) w/Chain Tongues K#: K30248

3 A 48” Nov Aluminum Pipe Wrench

Assy.-5066001005, S/N-1638402-1. w/ Clevis K#: K30179

16 U (1) Meter Run

2-3/8” Flanged & Threaded Ends, Kimray 2,000 PSI Gas Regulator, ABB Transmitter, Kimray 2,000 PSI PDC Valve. K#: K30326

3 A Weed Eater & Dual Head Tripod

Work Lights K#: K29189

Items Sell: 11:10 AM-11:15 AM 6 F 2012 Magnum MLT3060M Light

Tower (INOP) S/N 1203126, 1 Phase, 6kW, 6kVA, 240V, 25A, p/b Mitsubishi L3E 3 Cylinder Diesel Engine, S/N 231525, Metered Hours 7,531, Control Panel w/Gauges & Outlets, Mtd Fuel Tank, Manually Telescoping Mast w/(4) Lights, All On S/A Trailer Chassis, Manual Jack, (2) Leveling Jacks, Safety Chains, ST175/80D13 Tires w/Steel Wheels, Seller Asset LT1829, VIN 5AJLS1615CB003126. STARTER GEAR SPINS BUT DOESN’T ENGAGE FLYWHEEL. **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS1615CB003126 Meter Reads: 7531 K#: K28056

6 F 2011 Magnum MLT3060K Light

Tower (INOP) S/N 1200485, 1 Phase, 6kW, 6kVA, 240V, 25A, p/b Kubota D1005 3 Cylinder Diesel Engine, S/N BU6662, Metered Hours 6,671, Control Panel w/Gauges & Outlets, Mtd Fuel Tank, Manually Telescoping Mast w/(4) Lights, All On S/A Trailer Chassis, Manual Jack, (3) Leveling Jacks, Safety Chains, ST175/80D13 Tires w/Steel Wheels, Seller Asset LT1741, VIN 5AJLS1617CB000485. STARTS AND THEN IMMEDIATELY SHUTS DOWN. **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS1617CB000485 Meter Reads: 6671 K#: K28053




6 F 2012 Magnum MLT3060K Light Tower S/N 1210169, 1 Phase, 6kW, 6kVA, 240V, 25A, p/b Kubota D1005 3 Cylinder Diesel Engine, S/N CC0329, Metered Hours 9,966, Control Panel w/Gauges & Outlets, Mtd Fuel Tank, Manually Telescoping Mast w/(4) Lights, All On S/A Trailer Chassis, Manual Jack, Safety Chains, ST175/80D13 Tires w/Steel Wheels, Seller Asset LT1777, VIN 5AJLS1412CB210169. **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS1412CB210169 Meter Reads: 9966 K#: K28075


Tower S/N 1218932, 1 Phase, 6kW, 6kVA, 240V, 25A, p/b Kubota D1005 3 Cylinder Diesel Engine, S/N 1CN5959, Metered Hours 12,243, Control Panel w/Gauges & Outlets, Mtd Fuel Tank, Manually Telescoping Mast w/(4) Lights, All On S/A Trailer Chassis, Manual Jack, (2) Leveling Jacks, Safety Chains, ST175/80D13 Tires w/Steel Wheels, Seller Asset LT1739, VIN TAG MISSING. **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 1218932 Meter Reads: 12243 K#: K28058

6 F 2010 Magnum MLT3060K Light Tower (INOP) S/N 1102165, 1 Phase, 6kW, 6kVA, 240V, 25A, p/b Kubota D1005 3 Cylinder Diesel Engine, S/N AZ1275, Metered Hours 10,808, Control Panel w/Gauges & Outlets, Mtd Fuel Tank, Manually Telescoping Mast w/(4) Lights, All On S/A Trailer Chassis, Manual Jack, (3) Leveling Jacks, Safety Chains, ST175/80D13 Tires w/Steel Wheels, Seller Asset LT1795, VIN 5AJLS1611BB002165. WON’T TURN OVER OR START. **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS1611BB002165 Meter Reads: 10808 K#: K28057

6 F 2011 Allmand NLP8K Light Tower

S/N 1201PR011, Marathon Synchronous Pancake AC Generator, M/N 01CSA5420, S/N 806983, 1 Phase, 8kW, 8kVA, 120/240V, 66.7/33.3A, p/b Kubota D1005 3 Cylinder Diesel Engine, S/N AY2973, Metered Hours 5,309, Control Panel w/Gauges & Outlets, Mtd Fuel Tank, Manually Telescoping Mast w/(4) Lights, All On S/A Trailer Chassis, Manual Jack, Safety Chains, ST175/80D13 Tires w/Steel Wheels, Seller Asset LT0524, VIN ILLEGIBLE. **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 1201PR011 Meter Reads: 5309 K#: K28076




6 F 2013 Magnum MLT3060K Light Tower (INOP) S/N 1218928, 1 Phase, 6kW, 6kVA, 240V, 25A, p/b Kubota D1005 3 Cylinder Diesel Engine, S/N 1CN5636, Metered Hours 12,444, Control Panel w/Gauges & Outlets, Mtd Fuel Tank, Manually Telescoping Mast w/(4) Lights, All On S/A Trailer Chassis, Manual Jack, (3) Leveling Jacks, Safety Chains, ST175/80D13 Tires w/Steel Wheels, Seller Asset LT1834, VIN 5AJLS1415CB218928. TURNS OVER BUT WON’T START. **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS1415CB218928 Meter Reads: 12444 K#: K28060


Tower S/N 1300717, 1 Phase, 6kW, 6kVA, 240V, 25A, p/b Kubota D1005 3 Cylinder Diesel Engine, S/N 1CT1981, Metered Hours 10,510, Control Panel w/Gauges & Outlets, Mtd Fuel Tank, Manually Telescoping Mast w/(4) Lights, All On S/A Trailer Chassis, Manual Jack, (3) Leveling Jacks, Safety Chains, ST175/80D13 Tires w/Steel Wheels, Seller Asset LT1823, VIN 5AJLS1416DB300717. **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS1416DB300717 Meter Reads: 10510 K#: K28059

6 F 2012 Magnum MLT3060M Light Tower S/N 1216667, 1 Phase, 6kW, 6kVA, 240V, 25A, p/b Mitsubishi L3E 3 Cylinder Diesel Engine, S/N 234071, Metered Hours 8,462, Control Panel w/Gauges & Outlets, Mtd Fuel Tank, Manually Telescoping Mast w/(4) Lights, All On S/A Trailer Chassis, Manual Jack, (3) Leveling Jacks, Safety Chains, ST175/80D13 Tires w/Steel Wheels, Seller Asset LT1827, VIN 5AJLS1414CB216667. **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS1414CB216667 Meter Reads: 8462 K#: K28054

6 F 2012 Magnum MLT3060M Light

Tower S/N 1205111, 1 Phase, 6kW, 6kVA, 240V, 25A, p/b Mitsubishi L3E 3 Cylinder Diesel Engine, S/N A1710, Metered Hours 5,858, Control Panel w/Gauges & Outlets, Mtd Fuel Tank, Manually Telescoping Mast w/(4) Lights, All On S/A Trailer Chassis, Manual Jack, (3) Leveling Jacks, Safety Chains, ST175/80R13 Tires w/Steel Wheels, Seller Asset LT1826, VIN ILLEGIBLE. MISSING FENDERS. **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 1205111 Meter Reads: 5858 K#: K28052




6 F 2012 Magnum MLT3060K Light Tower (INOP) S/N 1202011, 1 Phase, 6kW, 6kVA, 240V, 25A, p/b Kubota D1005 3 Cylinder Diesel Engine, S/N BV0182, Metered Hours 11,257, Control Panel w/Gauges & Outlets, Mtd Fuel Tank, Manually Telescoping Mast w/(4) Lights, All On S/A Trailer Chassis, Manual Jack, (3) Leveling Jacks, Safety Chains, ST175/80D13 Tires w/Steel Wheels, Seller Asset LT1831, VIN 5AJLS1615CB002011. STARTER GEAR WON’T STAY ENGAGED TO START ENGINE WHILE TURNING ENGINE OVER. **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS1615CB002011 Meter Reads: 11257 K#: K28062

6 F 2006 CAT WCW64MH Light Tower

(INOP) M/N WCW-64-MH, S/N C06-03-01393, 2005 Mecc Alte Spa Generator, 1 Phase, 6kW, 6kVA, 120/240V, 50/25A, p/b CAT 3 Cylinder Diesel Engine, Metered Hours 754, Control Panel w/Gauges & Outlets, Mtd Fuel Tank, Manually Telescoping Mast w/(4) Lights, All On S/A Trailer Chassis, Manual Jack, (3) Leveling Jacks, Safety Chains, ST175/80D13 Tires w/Steel Wheels, Seller Asset LT1729, VIN TAG MISSING. STARTS AND THEN IMMEDIATELY SHUTS DOWN. **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: C060301393 Meter Reads: 754 K#: K28063

Items Sell: 11:15 AM-11:20 AM 6 F 2011 Magnum MLT3060M Light

Tower S/N 1112467, 1 Phase, 6kW, 6kVA, 240V, 25A, p/b Mitsubishi L3E 3 Cylinder Diesel Engine, S/N 225703, Metered Hours 7,092, Control Panel w/Gauges & Outlets, Mtd Fuel Tank, Manually Telescoping Mast w/(4) Lights, All On S/A Trailer Chassis, Manual Jack, (3) Leveling Jacks, Safety Chains, ST175/80R13 Tires w/Steel Wheels, Seller Asset LT1799, VIN 5AJLS1611BB012467. **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS1611BB012467 Meter Reads: 7092 K#: K28050


Tower S/N 1112444, 1 Phase, 6kW, 6kVA, 240V, 25A, p/b Mitsubishi L3E 3 Cylinder Diesel Engine, S/N A15025, Metered Hours 5,891, Control Panel w/Gauges & Outlets, Mtd Fuel Tank, Manually Telescoping Mast w/(4) Lights, All On S/A Trailer Chassis, Manual Jack, (2) Leveling Jacks, Safety Chains, ST175/80D13 Tires w/Steel Wheels, Seller Asset LT1801, VIN 5AJLS1610BB012444. **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS1610BB012444 Meter Reads: 5891 K#: K28051




7 F 2010 Magnum MLT3060M S/A Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Mitsubishi Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 6-KW Generator, 2” Hitch, Landing Gear, 175/80 R13 Tires, (7,062) Metered Hours (TX-M07-6814) (Asset# LT1797) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS1616CB005113 K#: K24872

7 F 2012 Magnum MLT3060 S/A

Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Mitsubishi Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 6-KW Generator, 2” Hitch, Landing Gear, 175/80 R13 Tires, (87,158) Metered Hours (TX-M06-3992) (Asset# LT1781) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS1416CB216668/1212362 Meter Reads: 7158 K#: K24885

7 F 2008 Allmand Maxi-Lite Sho-HD S/A Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, Pintle Hitch, Landing Gear, 225/75 R15 Tires, (Unverifiable) Metered Hours (TX-913-M81) (Asset# LT1219) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 0801MXL08 K#: K24869


Tower S/N 1203893, 1 Phase, 6kW, 6kVA, 240V, 25A, p/b Mitsubishi L3E 3 Cylinder Diesel Engine, S/N A1399, Metered Hours 5,868, Control Panel w/Gauges & Outlets, Mtd Fuel Tank, Manually Telescoping Mast w/(4) Lights, All On S/A Trailer Chassis, Manual Jack, (3) Leveling Jacks, Safety Chains, ST175/80D13 Tires w/Steel Wheels, Seller Asset LT1820, VIN 5AJLS1614CB003893. **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS1614CB003893 Meter Reads: 5868 K#: K28061

1 C 2008 Magnum MLT4200IMH T/A

INOP Light Tower/Water Tank Combo Pancake 20KW AC Generator p/b Isuzu 4-Cyl Diesel Engine, Light Tower w/(4) Lights (Missing Bulbs), Water Tank, Bumper-Pull, ST255/90D16 Tires VIN/SN: 5AJGS16188B001508 Meter Reads: 516 K#: K25706*




6 F 2013 Magnum MLT4060K Light Tower (INOP) S/N 1313357, 1 Phase, 6kW, 6kVA, 240V, 25A, Marathon Synchronous Pancake AC Generator, M/N 201CSA5411, S/N 878445, p/b Kubota D1005 3 Cylinder Diesel Engine, S/N 1DN5724, Metered Hours 15,432, Control Panel w/Gauges & Outlets, Mtd Fuel Tank, Manually Telescoping Mast w/(4) Lights, All On S/A Trailer Chassis, Manual Jack, (3) Leveling Jacks, Safety Chains, ST175/80D13 Tires w/Steel Wheels, Seller Asset LT1819, VIN ILLEGIBLE. TURNS OVER BUT WON’T START. **Title is not available. Bill of sale will be provided to convey ownership upon request.** Meter Reads: 15432 K#: K28055

1 C 2011 Magnum MTT20 T/A INOP

Light Tower/Water Tank Combo Pancake 20KW AC Generator p/b Isuzu 4-Cyl Diesel Engine, Light Tower w/(4) Lights (Missing Bulbs), Water Tank, Bumper-Pull, 7.50-16LT Tires VIN/SN: 5AJGS1610BB014261 Meter Reads: 24244 K#: K25707*

7 F 2011 Allmand Maxi-Lite Sho-HD S/A Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, Pintle Hitch, Landing Gear, 225/75 R15 Tires, (7,866) Metered Hours (TX-640-M85) (Asset# LT517) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 0208MXL11 Meter Reads: 7866 K#: K24859


Tower S/N 1204868, 1 Phase, 6kW, 6kVA, 240V, 25A, p/b Mitsubishi L3E 3 Cylinder Diesel Engine, S/N A1767, Metered Hours 8,711, Control Panel w/Gauges & Outlets, Mtd Fuel Tank, Manually Telescoping Mast w/(4) Lights, All On S/A Trailer Chassis, Manual Jack, (3) Leveling Jacks, Safety Chains, ST175/80D13 Tires w/Steel Wheels, Seller Asset LT1802, VIN 5AJLS161XCB004868. **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS161XCB004868 Meter Reads: 8711 K#: K28068

1 C 2014 Magnum MLT4200 T/A INOP

Light Tower/Water Tank Combo Pancake 20KW AC Generator p/b Isuzu 4-Cyl Diesel Engine, Light Tower w/(4) Lights (Missing Bulbs), Water Tank, Bumper-Pull, 7.50-16LT Tires VIN/SN: 5AJLS1824EB410606 Meter Reads: 8523 K#: K25708*




Items Sell: 11:20 AM-11:25 AM 7 F 2011 Magnum MLT3060M S/A

Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Mitsubishi Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 6-KW Generator, 2” Hitch, Landing Gear, 175/80 R13 Tires, (7,514) Metered Hours (TX-M07-6800) (Asset# LT1783) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS1615BB012469/1112469 Meter Reads: 7514 K#: K24880

7 F 2011 Allmand Night-Lite Pro-2 S/A

Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, Pintle Hitch, Landing Gear, 175/80 R13 Tires, (7,245) Metered Hours (TX-719-M97) (Asset# LT807) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 0593PR0211 Meter Reads: 7245 K#: K24887

7 F 2011 Allmand Night-Lite Pro Sho-HD S/A Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kholer Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, Pintle Hitch, Landing Gear, 175/80 R13 Tires, (4,527) Metered Hours (TX-M01-1678) (Asset# LT645) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 1846PR011 Meter Reads: 4527 K#: K24900


Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 6-KW Generator, 2” Hitch, Landing Gear, 175/80 R13 Tires, (9,834) Metered Hours (TX-M07-6811) (Asset# LT1794) (NOTE: 2-Flat Tires) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS1418CB210175/1210175 Meter Reads: 9834 K#: K24899





7 F 2011 Allmand Maxi-Lite Sho-HD S/A

Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, Pintle Hitch, Landing Gear, 225/75 R15 Tires, (4,269) Metered Hours (TX-337-M83) (Asset# LT482) VIN/SN: 0076MXL11 Meter Reads: 4269 K#: K24855

7 F 2011 Allmand Night-Lite Pro Sho-

HD S/A Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, Pintle Hitch, Landing Gear, 175/80 R13 Tires, (670) Metered Hours (TX-845-M90) (Asset# LT528) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 1205PR011 Meter Reads: 670 K#: K24898

7 F 2012 Magnum MLT3060 S/A Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Mitsubishi Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 6-KW Generator, Pintle Hitch, Landing Gear, 175/80 R13 Tires, (9,532) Metered Hours (TX-M06-3987) (Asset# LT1773) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS1619CB001328/1203128 Meter Reads: 9532 K#: K24879

7 F 2011 Allmand Night-Lite Pro-2 S/A

Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, 2” Hitch, Landing Gear, 175/80 R13 Tires, (6,563) Metered Hours (TX-711-M97) (Asset# LT800) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 0586PR0211 Meter Reads: 6563 K#: K24888




7 F 2011 Allmand Maxi-Lite Sho-HD S/A Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, 2” Hitch, Landing Gear, 225/75 R15 Tires, (10,962) Metered Hours (TX-240-M95) (Asset# LT738) (NOTE: Engine Disassembled) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 0558MXL11 Meter Reads: 10962 K#: K24857


HD S/A Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, Pintle Hitch, Landing Gear, 175/80 R13 Tires, (7,352) Metered Hours (TX-168-M95) (Asset# LT780) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 2458PR011 Meter Reads: 7352 K#: K24889


Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, 2” Hitch, Landing Gear, 225/75 R15 Tires, (10,732) Metered Hours (TX-34M-593) (Asset# LT1142) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 0554MXL12 Meter Reads: 10732 K#: K24871

Items Sell: 11:25 AM-11:30 AM 7 F 2013 Allmand Maxi-Lite Sho-HD S/A

Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, Pintle Hitch, Landing Gear, 225/75 R15 Tires, (14,106) Metered Hours (TX-34M-733) (Asset# LT1186) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 0037MXL13 Meter Reads: 14106 K#: K24853


Generator Light Plant W/(3) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, Pintle Hitch, Landing Gear, 225/75 R15 Tires, (8,694) Metered Hours (TX-34M-641) (Asset# LT1172) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 0016MXL13 K#: K24868




7 F 2011 Allmand Night-Lite Pro Sho-HD S/A Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, Pintle Hitch, Landing Gear, 175/80 R13 Tires, (6,904) Metered Hours (TX-559-M97) (Asset# LT757) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 2294PR011 Meter Reads: 6904 K#: K24883

7 F 2012 Magnum MLT3060K S/A

Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 6-KW Generator, 2” Hitch, Landing Gear, 175/80 R13 Tires, (9,393) Metered Hours (TX-M06-3989) (Asset# LT1775) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 1210131 Meter Reads: 9393 K#: K24881

7 F 2012 Magnum MLT3060 S/A Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 6-KW Generator, 2” Hitch, Landing Gear, 175/80 R13 Tires, (5,502) Metered Hours (TX-M06-3994) (Asset# LT1780) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS1413CB213162 Meter Reads: 5502 K#: K24874


Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 6-KW Generator, 2” Hitch, Landing Gear, 175/80 R13 Tires, (5,502) Metered Hours (TX-M06-3994) (Asset# LT1780) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS1416CB212362 Meter Reads: 8787 K#: K24873




7 F 2010 Allmand Maxi-Lite Sho-HD S/A Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, 2” Hitch, Landing Gear, 225/75 R15 Tires, (Unverifiable) Metered Hours (TX-917-M81) (Asset# LT381) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 0118MXL10 K#: K24864


Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 6-KW Generator, 2” Hitch, Landing Gear, 175/80 R13 Tires, (9,024) Metered Hours (TX-M07-6806) (Asset# LT1789) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS1419CB219161/1219161 Meter Reads: 9024 K#: K24886



HD S/A Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, Pintle Hitch, Landing Gear, 175/80 R13 Tires, (6,933) Metered Hours (TX-529-M92) (Asset# LT607) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 1723PR011 Meter Reads: 6933 K#: K24896


HD S/A Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, Pentle Hitch, Landing Gear, 175/80 R13 Tires, (222) Metered Hours (TX-184-M95) (Asset# LT796) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 2474PR011 Meter Reads: 222 K#: K24895




7 F 2012 Magnum MLT3060 S/A Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 6-KW Generator, Pintle Hitch, Landing Gear, 175/80 R13 Tires, (8,151) Metered Hours (TX-M07-6816) (Asset# LT1800) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS1413CB211623/1211523 Meter Reads: 8151 K#: K24878

Items Sell: 11:30 AM-11:35 AM 7 F 2011 Allmand Night-Lite Pro Sho-

HD S/A Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, Pintle Hitch, Landing Gear, 175/80 R13 Tires, (67,540) Metered Hours (TX-M07-7242) (Asset# LT763) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 2300PR011 Meter Reads: 7540 K#: K24893

7 F 2011 Allmand Night-Lite Pro-2 S/A Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, Pintle Hitch, Landing Gear, 175/80 R13 Tires, (6,232) Metered Hours (TX-720-M97) (Asset# LT808) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 0594PR0211 Meter Reads: 6232 K#: K24890

7 F 2010 Magnum MLT3060M S/A

Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Mitsubishi Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 6-KW Generator, 2” Hitch, Landing Gear, 175/80 R13 Tires, (10,335) Metered Hours (TX-M07-6803) (Asset# LT1786) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS1616AB007831/1007831 Meter Reads: 10335 K#: K24884




7 F 2011 Allmand Maxi-Lite Sho-HD S/A Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, Pintle Hitch, Landing Gear, 225/75 R15 Tires, (12,895) Metered Hours (TX-26M-75) (Asset# LT1118) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 0395MXL12 Meter Reads: 12895 K#: K24856


Generator Light Plant W/(3) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, Pintle Hitch, Landing Gear, 175/80 R13 Tires, (11,963) Metered Hours (TX-26M-441) (Asset# LT1107) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 0377MXL12 Meter Reads: 11963 K#: K24866



7 F 2011 Allmand Maxi-Lite Sho-HD S/A Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, 2” Hitch, Landing Gear, 175/80 R13 Tires, (6,427) Metered Hours (TX-665-M85) (Asset# LT546) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 1270PR011 Meter Reads: 6427 K#: K24892


Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Mitsubishi Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 6-KW Generator, 2” Hitch, Landing Gear, 175/80 R13 Tires, (10,730) Metered Hours (TX-M06-3988) (Asset# LT1774) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS161XCB04854/1204854 Meter Reads: 10730 K#: K24876





7 F 2011 Magnum MLT3060M S/A

Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Mitsubishi Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 6-KW Generator, 2” Hitch, Landing Gear, 175/80 R13 Tires, (8,526) Metered Hours (TX-M07-6804) (Asset# LT1787) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJL1617AB004419 Meter Reads: 8526 K#: K24875

7 F 2011 Allmand Maxi-Lite Sho-HD S/A Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, Pintle Hitch, Landing Gear, 225/75 R15 Tires, (Hours Unverifiable) (TX-610-M92) (Asset# LT661) (Note: Engine Disassembled) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 0410MXL11 K#: K24852


Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, Pintle Hitch, Landing Gear, 225/75 R15 Tires, (Unverifiable) Metered Hours (TX-M01-1689) (Asset# LT481 **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 0075MXL11 K#: K24861

Items Sell: 11:35 AM-11:40 AM 4 B Dyna Energetics Multitronic V

Firing Panel w/Padded Hard Case S/N 0036. VIN/SN: 0036 K#: K28600

2 V Ranch Hand GGC151BL1 Pickup

Truck Brush Guard K#: K018489




7 F 2011 Allmand Night-Lite Pro Sho-HD S/A Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, Pintle Hitch, Landing Gear, 175/80 R13 Tires, (858) Metered Hours (TX-839-M90) (Asset# LT527) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 1204PR011 Meter Reads: 858 K#: K24894

7 F 2010 Allmand Maxi-Lite ML8 Sho-

HD S/A Generator Light Plant W/(3) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, 2” Hitch, Landing Gear, 205/75 R15 Tires, (Hours Unverifiable) (TX-920-M81) (Asset# LT388) (Note: Engine Disassembled) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 0121MXL10 K#: K24851

7 F 2012 Magnum MLT3060 S/A Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 6-KW Generator, 2” Hitch, Landing Gear, 175/80 R13 Tires, (9,620) Metered Hours (TX-M07-6805) (Asset# LT1788) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS141XCB219007/1219007 Meter Reads: 9620 K#: K24882


Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, 2” Hitch, Landing Gear, 175/80 R13 Tires, (3,309) Metered Hours (TX-671-M85) (Asset# LT542) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 1266PR011 Meter Reads: 3309 K#: K24891




7 F 2011 Allmand Maxi-Lite Sho-HD S/A Generator Light Tower W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, Pintle Hitch, Landing Gear, 225/75 R15 Tires, (10,145) Metered Hours (TX-706-M92) (Asset# LT589) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 0322MXL11 Meter Reads: 10145 K#: K24854


Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, Pintle Hitch, Landing Gear, 225/75 R15 Tires, (8,207) Metered Hours (TX-M00-4175) (Asset# LT1222) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 0574MXL08 Meter Reads: 8207 K#: K24860





Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 6-KW Generator, 2” Hitch, Landing Gear, 175/80 R13 Tires, (8,506) Metered Hours (TX-M06-3990) (Asset# LT1776) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 5AJLS1412CB210155/1210155 Meter Reads: 8506 K#: K24877




7 F 2011 Allmand Night-Lite Pro Sho-HD S/A Generator Light Plant W/(4) Light Fixtures, P/B 3-Cylinder Kubota Diesel Engine, W/Electric Start, Radiator, Gauges, Exhaust Muffler, Enclosure, Control Panel, W/Marathon Pancake 8-KW Generator, Pintle Hitch, Landing Gear, 175/80 R13 Tires, (8,052) Metered Hours (TX-M02-1568) (Asset# LT545) **Title is not available. Bill of sale will be provided to convey ownership upon request.** VIN/SN: 1269PR011 Meter Reads: 8052 K#: K24897

Items Sell: 11:40 AM-11:45 AM 4 B Dyna Energetics Surface Tester

w/Padded Hard Case S/N 0206. VIN/SN: 0206 K#: K28597

2 F (2) Pickup Truck Brush Guards

K#: K015043


K#: K015045

4 B Dyna Energetics Infinity Surface

Tester w/Padded Hard Case S/N 0074. VIN/SN: 0074 K#: K28595

4 B Dyna Energetics Multitronic V Firing Panel S/N 0030. VIN/SN: 0030 K#: K28604

4 B Dyna Energetics Multitronic V



Firing Panel S/N 0045. VIN/SN: 0045 K#: K28603

4 B Dyna Energetics Surface Tester



K#: K015044






4 B Dyna Energetics Surface Tester w/Padded Hard Case S/N 0154. VIN/SN: 0154 K#: K28599

4 B Dyna Energetics Surface Tester


Items Sell: 11:45 AM-11:50 AM 3 A Qty (2) Reciever Hitch 5000# W/ 2"

Ball Key Lock Pin, (3) Replacement Light Plugs K#: K27086

3 A Appx. (81) 1", (7) 3/4", & (6) 7/8" x

1" BOP Studs K#: K30137

3 A Qty (2) 5-1/2'L x 3-1/2'W Metal Tool

Pick Up Bed Liners (1) Liner Needs Repair, 5-1/2' x 3-1/2' K#: K27079

3 A (15) 1/4” Studs

K#: K30138

3 A (16) 1-3/8” x 1-1/8” Combo Bolts

Approx. (16) 1 3/8” x 1 1/8” Comb. Bolts K#: K30149

3 A (35) 1/2” Studs K#: K30139

3 A (97) 1-3/8” Studs

Approx. (97) 1 3/8” Studs K#: K30144

3 A (19) 1-1/2” Bolts

Approx. (19) 1 ½” Bolts K#: K30142

3 A (45) 1” Bolts & (22) 1” Studs (No

Nuts) Approx. (45) 1” Bolts & (22) 1” Studs (No Nuts) K#: K30146

3 A (42) 1-7/8” Studs w (70) Nuts

Approx.(42) 1 7/8” w (70) Nuts K#: K30141

3 A Appx. (84) 1-3/8” Studs

Approx. (84) 1 3/8” Bolts K#: K30140

3 A (10) 1-7/8” Studs

Approx. (10) 1 7/8” Studs K#: K30148




Items Sell: 11:50 AM-11:55 AM 6 F 2004 Big Tex T/A B/P Fresh Water

Station Trailer Mtd 925 Gallon Capacity Poly Tank, Mtd 4’L x 3’W Storage Box, All Mtd On T/A Trailer Chassis, Manual Jack, Safety Chains, 12’L x 6’11”W Deck w/1’6”H Rails, OAL 16’, ST225/75R15 Tires w/Steel Wheels, Seller Asset FWS0017, VIN 16VPX122341H35285. MISSING FRONT PASSENGER RIM & TIRE, FRONT DRIVER TIRE IS FLAT. VIN/SN: 16VPX122341H35285 K#: K28031

6 F 2008 Big Tex T/A B/P Fresh Water

Station Trailer Mtd 925 Gallon Capacity Poly Tank, Mtd 4’L x 3’W Storage Box, All Mtd On T/A Trailer Chassis, Manual Jack, Safety Chains, 12’L x 6’11”W Deck w/1’6”H Rails, OAL 16’, ST225/75R15 Tires w/Steel Wheels, Seller Asset FWS0056, VIN 16VPX122281H06253. JACK ASSY IS SLIGHTLY BENT. VIN/SN: 16VPX122281H06253 K#: K28032


Station Trailer Mtd 925 Gallon Capacity Poly Tank, Goulds I5S Transfer Pump, p/b 1/2 HP Century Electric Motor, Mtd Pressure Tank, Mtd Inside 4’L x 3’W Storage Box, All Mtd On T/A Trailer Chassis, Manual Jack, Safety Chains, 12’L x 6’11”W Deck w/1’6”H Rails, OAL 16’, ST225/75R15 Tires w/Steel Wheels, Seller Asset FWS0034, VIN 16VPX122661H85021. MISSING FRONT DRIVER & PASSENGER RIMS & TIRES. VIN/SN: 16VPX122661H85021 K#: K28030

6 F 2004 Big Tex T/A B/P Fresh Water Station Trailer Mtd 925 Gallon Capacity Poly Tank, Goulds I5S Transfer Pump, p/b 1/2 HP Century Electric Motor, 4’L x 3’W Storage Box, All Mtd On T/A Trailer Chassis, Manual Jack, Safety Chains, 12’L x 6’11”W Deck w/1’6”H Rails, OAL 16’, ST225/75R15 Tires w/Steel Wheels, Seller Asset FWS0019, VIN 16VPX122141H39934. MISSING FRONT DRIVER WHEEL HUB, RIM & TIRE, MISSING FRONT PASSENGER RIM & TIRE. VIN/SN: 16VPX122141H39934 K#: K28033

2 F 2007 Big Tex 6’8”W x 16’L T/A

Trash Trailer w/ Ball Hitch, Elec Brakes, Spring Susp, 225/75R15 VIN/SN: 16VPX162171E45240 K#: K018406


Station Trailer 925-Gallon, Storage Box, All MTD on 2008 BigTex T/A Bumper Pull Trailer, W/ 2-5/16” Hitch, Landing Gear, Spring Suspension, 225/75 R15 Tires, Steel Wheels (NO LIC. Plate) (Asset# 60) VIN/SN: 16VPX122681H15859 K#: K24923




6 F 2004 Big Tex Fresh Water Station T/A Flatbed Trailer Mtd 925 Gallon Capacity Poly Tank, Goulds I5S Transfer Pump, p/b 1/2 HP Century Electric Motor, Mtd Pressure Tank, Mtd Inside 4’L x 3’W Storage Box, All Mtd On T/A Trailer Chassis, Manual Jack, Safety Chains, 12’L x 6’11”W Deck w/1’6”H Rails, OAL 16’, ST225/75R15 Tires w/Steel Wheels, Seller Asset FWS0016, VIN 16VPX122841H35282. MISSING FRONT PASSENGER TIRE IS FLAT. VIN/SN: 16VPX122841H35282 K#: K28072

6 F 2012 Hefty T/A B/P Trash Trailer

16’L x 7’W x 6’3”H Cage, OAL 20’, Safety Chains, ST235/80R16 Tires w/Steel Wheels, Seller Asset TT0023, VIN 5NKBU1628CP006692. PASSENGER TIRES ARE FLAT, MISSING JACK, MISSING REAR DRIVER WHEEL HUB, RIM, & TIRE. VIN/SN: 5NKBU1628CP006692 K#: K28034

2 F 2014 3'6"W x 6'L S/A Trailer

Chassis w/ Ball Hitch, 225/75R15 VIN/SN: 4B91W0916EW018091 K#: K015031*

16 U (4) Portable Pressure Bottles

(3) Jatco Air Tanks, (1) Manchester Air Tank, w/Some Line & Valves. K#: K30410

3 A (26) 7/8” & (21) 1” Studs Approx. (26) 7/8” & (21) 1” Bolts K#: K30143

3 A (11) 1-5/8” x 1-3/8” Combo Studs

Approx. (11) 1 5/8” x 1 3/8” Comb. Bolts K#: K30145

Items Sell: 11:55 AM-12:00 PM 1 I Busch MM1142BV Vacuum Pump

p/b 3.5kW Lafert Electric Motor. VIN/SN: U134900141 K#: K32541

2 F (4) Electric Submersible Water

Pumps w/ (3) Godwin 5.8 Hp 555 Gpm, (1) Mody 7.5 Hp, Floats K#: K018451


Pumps (4) Godwin 5.8 Hp 555 Gpm, (1) Mody 7.5 Hp K#: K018455

1 I 2011 Becker VXLF Vacuum Pump

200mBar Pump, p/b 5.5kW Electric Motor. VIN/SN: 2614365 K#: K32542




1 I Intervac PLM 42/5C/F Vacuum Pump Mtd Filter Housing, Mtd Tank, p/b 10HP Dayton Electric Motor, Control Panel, 58,954 Metered Hours, All Mtd On 4'8"L x 3'W Skid. VIN/SN: 5643 K#: K32543

1 I Travaini PVLB-200 200 Gal Vacuum

System Ea p/b 5.6kW Baldor Eletric Motors, Mtd On 1997 Brunner Eng, 200 PSI. VIN/SN: 97040422 K#: K32539

3 A Qty (3) Shop Built Steel Water

Filtering Systems 26” DIA x 49” L W/ Steel Door, Filter Rods, Junk Basket, Skidded w/ Lifting Eyes, Incl. Unused Filters K#: K27605


Pumps w/ (3) Godwin 5.8 Hp 555 Gpm, (1) Mody 7.5 Hp, Floats K#: K018452

2 C Tsurumi EPT3-80HA 3" 357 Gpm

Water Pump p/b Honda 1 Cyl Diesel Eng VIN/SN: 025308 K#: K015050

2 F (3 ) Godwin Electric Submersible Water Pumps w/ (4) Floats K#: K018453


Pumps (3) Godwin 5.8 Hp 555 Gpm, (1) Flygt 8.9 Hp, Floats K#: K018454

3 A Dewalt Heavy Duty 8” Bench

Grinder, Gladiator Welding Cabinet & Flammable Cab. 5'5"H x 2'10"W x 2'10" Justrite Liquid Storage Cabinet, Contents in Welding Cabinet Included. Misc. Items Incl. Brazing Tips, Cutting Torch, Victor Gauges, Welding Cart & More. K#: K29169

Items Sell: 12:00 PM-12:05 PM 3 A (3) GR # 6112 LCS Basket Grapples

Catch Sizes; 2.702, (2) 2 7/8” K#: K24431

3 A (3) GR # 6112 LCS Basket Grapples

(UNUSED) 3”, 2 7/8”, 3 21/32” & (2) Controls K#: K24398

3 A (3) GR# 15809 Grapples w/ Controls

(Unused) (2) Baskets; 10” & 9.5”, (1) 10 ¾” Spiral, (1) Type A Packer K#: K24352




3 A (3) GR# 6112 LCS Basket Grapples (UNUSED) w/ Controls 2.782”, 3 3/32”, 3 1/16” & (1) Packer K#: K24397

3 A (4) GR# 9862 Spear Grapples

(Unused) Catch Sizes- (2) 4.805, (2) 4.961 K#: K26008

2 F 2007 MQ Power TRLR150XFH T/A

Generator Fuel Tank Trailer Chassis w/ 6000# Axles, Spring Susp, 235/85R16 VIN/SN: 5SLBG17227L002062 K#: K018364*

2 F 2004 MQ Power 4 x 11 T/A

Generator Fuel Tank Trailer Chassis w/ 4500# Axles VIN/SN: 1E9GF892XBR153094 K#: K017050*

3 A (3) GR# 6112 NIT Basket Grapples

(UNUSED) w/ Controls 3 1/16” (LCS) & (2) 2 7/8” K#: K24429

2 F 2011 4'8"W x 17'L T/A Gooseneck

Generator Fuel Tank Trailer Chassis w/ Elec Brakes, 215/75R15 VIN/SN: TR203455 K#: K015040*

3 A 4-9/16” Washdown Cutter T-Dog Assy. PN 1L06000312625 K#: K29135

3 A Grease Fittings, O-Rings, Snap

Rings, Roll Pins,& Misc Fittings & Connectors K#: K27098

3 A 4-9/16” Washdown Cutter T-Dog

Assy. PN 1L06000312625 K#: K29134

Items Sell: 12:05 PM-12:10 PM 3 A (3) GR# 6112 LCS Basket Grapples

(UNUSED) 3 1/16”, 3 3/32”, 2 19/32” K#: K24430

11 O QTY (1) 11-3/4” OD Overshot

(UNUSED) W/Dual Grapple Baskets, W/6-5/8” REG CONN K#: K22353*

11 O QTY (1) 11-1/2” OD Reverse

Circulation Overshot W/6-5/8” REG CONN K#: K22356*




11 O QTY (1) 10-3/4” Reverse Circulation Overshot W/6-5/8” REG CONN K#: K22355*




Circulating Overshot W/4-1/2” REG CONN K#: K22364*




(UNUSED) W/6-5/8” REG CONN K#: K22354*



11 O QTY (1) 12-1/8” OD Overshot (UNUSED) W/Dual Grapple Baskets, W/6-5/8” REG CONN K#: K22351*




W/6-5/8” REG CONN K#: K22363*

Items Sell: 12:10 PM-12:15 PM 3 A (3) GR# 6662 Basket Grapples

(UNUSED) Catch Sizes; 3-3/32”, (2) 2-1/16”, & 2-1/4” ID Stop K#: K23693

3 A (3) GR# 6662 Basket Grapples

(UNUSED) Catch Sizes; (2) 3-1/16” & (1) 2-7/8” w/ Control, & 3” Stop K#: K23676


(UNUSED) Catch Sizes; 3-1/16”, (2) 2-3/8” & 2” EUE Collar K#: K23679




3 A (3) GR# 6662 Basket Grapples (UNUSED) Catch Sizes; 3-1/16”, 2-7/8”, 2-3/32” K#: K23692


(UNUSED) w/ Controls 5 ½” LCS & 4 ½” K#: K24367


(UNUSED) Catch Sizes; (1) 3-1/16”, (2) 2-19/32” w/ Stop K#: K23716


(UNUSED) Catch Sizes; 2.900, 2-19/32”, 2-15/16” K#: K24442

3 A (3) GR #37590 Basket Grapples

(UNUSED) W/ (1) Control & Stop Catch Sizes; 2-3/16”, 2-19/32”, 2-1/16” w/ Control & 2-3/16" ID Stop K#: K30958

3 A (4) GR# 6112 Spiral Grapples

(UNUSED) + (3) Controls 4-5/8” RHW, 4-1/2”, (2) 4-3/4” K#: K24417



(UNUSED) Catch Sizes; (1) 3”, (1) 2-3/8” w/ Control, (1) 2-1/16” K#: K23684


(UNUSED) W/Dual Grapple Baskets, W/6-5/8” REG CONN K#: K22352*


(UNUSED) w/ Controls 6 ¼” & 6 1/8” K#: K23651


(UNUSED) w/ (2) Stops Catch Sizes; 1-7/8”, 1”, 2-1/2” & 2-1/2” & 1-7/8” ID Stops K#: K30957

3 A (4) GR# 9403 Short Catch Grapples

(Unused) Catch Sizes; 1-1/2”, 1.660”, 1-13/16”, 5/8” K#: K31069




3 A (2) GR# 5334 Basket Grapples (UNUSED) W/ Controls 6 ¾” & 7 ½” K#: K24423


(UNUSED) Catch Sizes; (2) 2-3/8” w/ Controls, 2-3/4” K#: K23701


(UNUSED) Catch Sizes; 1-3/8”, 2-3/8” w/Mill Control, 3-1/16” K#: K23715

3 A (3) GR# 6112 RHW Basket Grapples

(UNUSED) 3-1/8”, 2-3/4”, 2-19/32” K#: K24414

3 A (3) GR #10546 LCS Short Catch

Grapples (UNUSED) w/ (1) Control Catch Sizes; 3-1/16”, (2) 2-19/32” K#: K30984


(UNUSED) Catch Sizes; (3) 2-7/8” K#: K23709

3 A (3) GR# 6662 Basket Grapples (UNUSED) Catch Sizes; (2) 2-3/8” w/ Controls, 3-3/32” K#: K23705


(UNUSED) W/ Controls 5 7/8” & 6 1/8” K#: K24356


(UNUSED) w/ (2) Controls & (1) Type A Packer Catch Sizes; (2) 3.230, (2) 3-1/2” K#: K23726

Items Sell: 12:20 PM-12:25 PM 3 A (3) GR #37590 Basket Grapples

(UNUSED) W/ (1) Control & Stop Catch Sizes; 2-3/8” w/ Control, 2-19/32” RHW, 2-3/8” RHW & 2-3/8” Stop K#: K30962


(Unused) w/ (1) Control & Stop Catch Sizes; 7/8”, (2) 2-3/8” K#: K31061


(UNUSED) w/ (1) Control Catch Sizes; (2) 2-11/16, 2-1/8 w/ Control K#: K30966






(UNUSED) Catch Sizes; 2-3/4” w/ Control, 2-1/8”, 2-7/8” K#: K23690


(UNUSED) Catch Sizes; (2) 2-7/8”& 2-3/8 w/Mill Control K#: K23711


(UNUSED) w/ Controls Catch Sizes; (2) 2-3/8”, 2-7/8”, & 2-1/2” EUE Collar K#: K23678


(UNUSED) w/ Controls 7 5/8”, 7”, 5 ½” K#: K24358


(Unused) Catch Sizes-6.470”, 6.564” K#: K26005

3 A (3) GR# 6662 Basket Grapples (UNUSED) Catch Sizes; (1) 2.702”, (1) 2-3/8” w/ Control & 2-7/8” K#: K23680


(UNUSED) 2.702”, 2-3/8”, 3-1/16” K#: K24450


(Unused) Catch Sizes- 5.970”, 6.220” K#: K26002


(UNUSED) w/ Controls 5 ½” & 4 ½” K#: K24372


(UNUSED) 4 ¼”, 4”, 2 ¼”, & 2 ¼” & 2” Stop K#: K24399


(UNUSED) w/ Controls Catch Sizes; (3) 3-1/8” K#: K23694




3 A (3) GR# 6112 RHW Basket Grapples (UNUSED) 4-1/4” w/ Control, 4-1/4”, 3-1/8” K#: K24415


(UNUSED) Catch Sizes; 2-3/4”, 3”, 2.702" K#: K23691

3 A (2) 4 ½” Gr# 9687 Basket Grapples

(UNUSED) w/ Controls K#: K24424


(UNUSED) Catch Sizes; 1.660”, 3.220 w/ Control, 2-5/8” & 2” EUE Collar K#: K23685


(UNUSED) Catch SIzes; 3”, 3-1/16” w/ Control, 2-7/8” K#: K23703

3 A (3) GR# 6662 LCS Basket Grapples

(UNUSED) w/ Controls Catch Sizes; 3-3/32”, 2-19/32”, 2-3/32” K#: K23670

3 A (3) GR# 6112 RHW Basket Grapples (UNUSED) 2-19/32”, 3-3/4”, 2-3/8” K#: K24449


(UNUSED) w/ Controls 5 1/8” & 5 ½” K#: K24370


(UNUSED) w/ (3) Controls & (1) Stop Catch Sizes; (3) 2-7/8” & (1) 1-3/4” K#: K31063

Items Sell: 12:30 PM-12:35 PM 3 A (3) GR# 6662 Spiral Grapples

(UNUSED) w/ (1) Control & Type A Packer Catch Sizes; 3-1/2”, (2) 3-21/32” K#: K23724


(Unused) Catch Sizes-2.875, 3.345 K#: K26014


(UNUSED) 2 5/8”, 3 5/8”, 3 7/16” & (2) Stops; 3 5/8” & 3 ¼” K#: K24436




3 A (2) GR# 9222 Basket Grapples (UNUSED) w/ Controls 6” & 6 3/8” K#: K23656


(UNUSED) w/ Controls 5 3/8” & 6 1/8” K#: K24427


(Unused) w/ (1) Control & Stop Catch Sizes; (2) 2-19/32”, 2-3/8” K#: K31060


(Unused) w/ (1) Control & Stop Catch Sizes; (2) 2-3/8” NIT & (1) 2-19/32” LCS K#: K31059


(UNUSED) w/ (1) Control Catch Sizes; (2) 2-3/8” & 4-1/8” K#: K24421


(UNUSED) 2 3/8”, 3 ¾”, 3 3/32” K#: K24441

3 A (3) GR# 6662 Basket Grapples (UNUSED) Catch Sizes; (1) 3/4”& (2) 2-7/8” K#: K23717


(Unused) Catch Sizes; 1-11/16”, 1-13/16”, 7/8”, 1-5/8” K#: K31068


(Unused) Catch Sizes- 7.187, 6.220 K#: K26003

Items Sell: 12:35 PM-12:40 PM 3 A (3) GR# 6662 LCS Basket Grapples

(UNUSED) w/ Controls Catch Sizes; 3-3/32”, 2-19/32”, 2-7/8” K#: K23671


(UNUSED) 4”, 2-3/8”, 4-1/8” K#: K24446


(UNUSED) w/ (2) Controls Catch Sizes; 2-3/8” NIT w/ Control, (2) 2-19/32” LCS; (1) w/ Control K#: K30956




3 A (3) GR# 6662 Basket Grapples (UNUSED) Catch Sizes; 2-7/8”, 2-3/8” w/ Control, 3-3/32” K#: K23704


(UNUSED) 1-1/2” w/ Control, 2-7/8” w/ Control & 2”, & 2” Stop K#: K24411

3 A (3) GR #13538 Short Catch

Grapples (UNUSED) w/ (1) Control Catch Sizes; 2-19/32”, 2-5/16” , 2-3/8” K#: K30979


(UNUSED) 3 1/8”, 3”, 2 3/8” K#: K24433


(UNUSED) Catch Sizes; (1) 2”, (1) 2-3/8” w/ Control, (1) 2-7/8”, & 2” Stop K#: K23681


(UNUSED) w/ Controls Catch Sizes; 3”, 3-1/16”, 2-7/8”, & 3” Stop K#: K23674

3 A (2) GR# 9687 Basket Grapples (UNUSED) w/ Controls 5” & 4 1/8” w/ (2) Stops; 4 3/8” & 4 ¾” K#: K24373


(UNUSED) 2”, 2-3/4”, 3-3/4”, & (2) Stops K#: K24413


Grapples (UNUSED) w/ (1) Control Catch Sizes; 2-3/4”, 2-1/2”, 2-3/8” K#: K30989




(UNUSED) w/ (1) Control Catch Sizes; 2-3/8”, 2-5/16” , 2-19/32” K#: K30967


(UNUSED) 3.220, 3 21/32, 3 1/16” K#: K24400




3 A (3) GR# 9272 Basket Grapples (Unused) w/ (1) Control & Stop Catch Sizes; 1.900”, 2-3/8”, 1-1/4” K#: K31062


(UNUSED) w/ (2) Controls Catch Sizes; 2-5/8”, 2-3/8” w/ Control, 2-1/8” w/ Control, & 2-3/8” Collar Stop K#: K30961

3 A (3) GR# 6662 LCS Basket Grapples

(UNUSED) w/ Controls Catch Sizes; 3-1/16” RHW, 3-1/16”, 2-19/32” & 2-1/4” Stop K#: K23672


(UNUSED) Catch Sizes; 2-3/8” w/ Control, 1-3/4” w/ Control, 1-1/2” & 2” Stop K#: K30960


(UNUSED) Catch Sizes; 2-19/32”, (2) 2-7/8” w/ Stop K#: K23708


(Unused) Catch Sizes; 1-3/8”, 1-11/16”, 1-9/16”, 1-7/16” K#: K31067

3 A (2) GR# 9268 Spear Grapples (Unused) Catch Sizes- 6.564”, 7.064” K#: K26004


(UNUSED) 3 21/32”, 4”, 4 ¼” K#: K24435


(UNUSED) Catch Sizes; (2) 3.220 w/ Controls & 2-1/16” K#: K23683


(UNUSED) w/ (1) Control & Type A Packer Catch Sizes; 3.327”, 3-1/4”, 3-3/8” K#: K23725


(UNUSED) Catch Sizes; (1) 2-7/8”, (1) 2-5/8” w/ Control, (1) 3” K#: K23686


(UNUSED) 3”, 1 ½”, 2 3/8 w/ Control & (3) Stops K#: K24410




3 A (3) GR# 6662 Basket Grapples (UNUSED) Catch Sizes; 3”, (2) 2-3/8” w/ Mill Control K#: K23712


(UNUSED) w/ Controls Catch Sizes; 3-1/16” LCS, 3-1/16”, 2-7/8” K#: K23673


Grapples (UNUSED) w/ (1) Control Catch Sizes; (2) 3-1/16” & 3-1/8” K#: K30985


(UNUSED) Catch Sizes; 3-3/32”, 2.702", 2-7/8” w/ Stop K#: K23713


(UNUSED) Catch Sizes; (2) 2-3/4” w/ (1) Control & 2-3/8” w/ Control K#: K23669


(UNUSED) w/ Controls 4 ¼” & 5 ¾” K#: K24428

3 A (3) GR# 6112 Basket Grapples (UNUSED) 2 7/8”, (2) 3 1/16” K#: K24439






(UNUSED) Catch Sizes; 2-5/16”, 3-1/16”, 2-19/32”, & 2-1/4” ID Stop K#: K23706


(UNUSED) 2 3/8”, 2 19/32”, 3 21/32” K#: K24440


(UNUSED) Catch Sizes; 1-1/8”, 2-19/32” w/ Control, 2-3/8” w/ Control K#: K23699




3 A (3) GR# 6112 Basket Grapples (UNUSED) 2 3/8”, 3 1/16”, 2 19/32 K#: K24432


(UNUSED) 3-3/4”, 3-1/2”, 4-1/8” K#: K24447


(UNUSED) w/ Controls 3 1/16” (LCS) & 2 3/8” K#: K24396


(UNUSED) Catch Sizes; 3-1/8” w/ Control, 2.900”, 2-7/8” w/ Control, & 2-1/2” Stop K#: K23677


(UNUSED) w/ (1) Control Catch Sizes; (2) 2-7/8”, 3-3/32” K#: K24408


(UNUSED) + (3) Controls (2) 4-1/2” & 4-5/8” K#: K24418

3 A (3) GR #37590 Basket Grapples (UNUSED) Catch Sizes; 2” w/ Control, 1-1/2”, 1-5/8” & 1-5/8” Collar Stop K#: K30959






(UNUSED) Catch Sizes; (1) 1”, (1) 2-7/8”, (1) 2-19/32 w/ Control K#: K23689

3 A (2) 5 ½” GR# 9222 Basket Grapples

(UNUSED) (1) 4 3/4” ID Stopper & 6 ¾” Type A Packer K#: K23652






3 A (3) GR# 6112 Basket Grapples (UNUSED) 2-3/8” w/ Control, 2-3/32” w/ Control & 3” K#: K24409








(UNUSED) & Stop Catch Sizes; 1-5/8”, 7/8”, 3/4” & 1/2” Stop K#: K30963


(UNUSED) Catch Sizes; (2) 2-7/8” w/ Controls, 3-1/16”,& 3-1/2” Stop K#: K23675

3 A (4) GR# 9403 NIT Short Catch Grapples (UNUSED) Catch Sizes; (2) 1.660, 1.600, 1-7/16” K#: K31066




(UNUSED) 3 1/16”, 3 3/8”, 4 ¼” K#: K24405


(UNUSED) 3 ¼”, 3 ½”, 3” & 3 ½” Stop w/ (2) Controls K#: K24404


(UNUSED) Catch Sizes; 3-3/32”, (2) 3-1/8” K#: K23698






3 A (3) GR# 6112 RHW Basket Grapples (UNUSED) 3-3/8”, 3-21/32”, 2-3/8” K#: K24416


(UNUSED) 2 3/8”, 3 3/8”, 2 7/8” & (2) Packers K#: K24406


(UNUSED) w/ (1) Control 5” & 5 ½” K#: K24368


(UNUSED) W/ Controls 6” & 8 7/8” K#: K23653


(UNUSED) & Stop Catch Sizes; (2) 2-19/32”, 2-5/8” & 3” Stop K#: K30964


(UNUSED) 2 7/8”, 2 19/32”, 2 3/8” K#: K24401

3 A (3) GR# 6112 Basket Grapples (UNUSED) 3 ½”, 3 1/16”, 2 ¼” & 2 ¼” Stop K#: K24407


(UNUSED) (2) 2 3/8”, 3 7/16” & 3 7/8”-2” Stop K#: K24437


(UNUSED) Catch Sizes; 2-7/8”, 3-1/16”, 3-3/32” K#: K23702


(UNUSED) 2 5/8”, 3 1/8”, 4 ¼” & 2 5/8” Stop K#: K24403


(UNUSED) (2) 2-3/8”, 1-3/4” K#: K24412


(UNUSED) Catch SIzes; 2-3/8” w/ Control & (2) 2-7/8” K#: K23707




3 A (3) GR #13538 Short Catch Grapples (UNUSED) w/ (1) Control Catch Sizes; 2”, 2-3/8”, 3-3/4” K#: K30978


(UNUSED) 2-3/8”, 2-1/4”, 3-5/8” K#: K24445


Grapples (UNUSED) Catch Sizes; 3-21/32”, 1-5/8”, 3-1/2”, 3-5/8” K#: K30993


(UNUSED) 4 1/16”, 1 ¾”, 2 ¾” (RHW) K#: K24438


(UNUSED) 3 7/16”, 2 5/8”, 3 3/ 32” K#: K24402


(UNUSED) Catch Sizes; 3-3/32” RHW w/ Control, 3-3/32”, 3-1/16” K#: K23687

3 A (3) GR# 6112 Basket Grapples (UNUSED) (2) 2-3/8”, 3-7/16” K#: K24443




(UNUSED) 3-1/8”, 3-3/32”, 3-21/32” K#: K24448


(UNUSED) w/ (1) Control Catch Sizes; 2-11/16”, (2) 2-3/8 w/ Control K#: K30965


Grapples (UNUSED) w/ (1) Control Catch Sizes; 1-1/2”, 3-21/32”, 2” K#: K30988


(UNUSED) W/ Controls 5 ½” & 5 5/8” K#: K24422




3 A (2) GR# 5334 Basket Grapples (UNUSED) W/ Controls 4 ½” & 5” K#: K24355


(UNUSED) 4 1/8”, 2 5/16”, 3 1/16” K#: K24434

3 A (2) GR# 5334 Grapples (UNUSED)

(1) 6 3/8” Basket w/ Control, (1) 9 ½” Spiral K#: K24357


(UNUSED) Catch Sizes; 3-3/32”, (2) 2-1/2”, & (2) 2-1/2” Stops K#: K23714




Grapples (UNUSED) w/ (1) Control Catch Sizes; 2-5/8”, 1-3/8”, 3” K#: K30992

3 A (3) GR# 6662 NIT Basket Grapples (UNUSED) Catch Sizes; 2-7/8” w/ Control,(2) 2-3/4”,w/ (1) Control & 2 3/8” Stop & 2" EUE Collar K#: K23668


(Unused) Catch Sizes- 3.885, 4.010, 3.947, 3.744 K#: K26010


(UNUSED) 3-1/8”, 2-3/8” w/ Control, 2-7/8” w/ Control K#: K24444


(UNUSED) w/ (2) Controls Catch Sizes; (2) 1-3/4”, 1-7/16” & 1-1/4" ID Stop K#: K30953

3 A (2) 10” GR# 5334 Spiral Grapples

(UNUSED) K#: K23654

3 A (4) GR #9307 Spiral Grapples

(UNUSED) w/ (1) Control Catch Sizes; (2) 2-1/4”, (2) 2-3/8” K#: K30952




3 A (3) GR# 1348 Spear Grapples (Unused) Catch Sizes; 2.430”, 2.211”, 1.992” K#: K31090


Grapples (UNUSED) w/ (1) Control Catch Sizes; 2-1/2”, 2-1/4” K#: K30981


(Unused) Catch Sizes; 7.187 & 6.470 K#: K31098

3 A (3) GR# B10204 Basket Grapples

(Unused) Catch Sizes; 1.660” & (2) 1.5” K#: K31088


(UNUSED) & (1) Control Catch Sizes; 3/4” NIT, 15/16”, 1-1/8” K#: K31072


(UNUSED) w/ (1) Control & Type A Packer Catch Sizes; 3-1/16”, 3”, 2.900” K#: K30973

3 A (2) GR# 9123 3-3/4" Catch Spiral Grapples (UNUSED) w/ Controls K#: K30947

3 A (4) 3-1/2” IF Drill Collar Subs 18

Degree Taper K#: K24299

3 A (3) GR# B3607 Spiral Grapples

(UNUSED) Catch Sizes; 3-1/8”, 3.220”, 3-1/2” K#: K30932

Items Sell: 1:20 PM-1:25 PM 3 A (3) GR# B3607 Basket Grapples

(UNUSED) Catch Sizes; 2-1/4”, (2) 2-19/32” & (1) 2-1/4" Stop K#: K30926


(UNUSED) Catch Sizes; 7/8”, 3/4”, 1” K#: K31073


(UNUSED) w/ (1) Control Catch Sizes; 2-19/32”, 3”, 2-3/8” K#: K30923




3 A (3) GR# 6662 Spiral Grapples (UNUSED) w/ (1) Control Catch Sizes; 3-5/8”, 3-1/2”, 3-7/16” K#: K23723


(UNUSED) w/ (1) Control Catch Sizes; 3-21/32”, 3-5/8”, 3-3/8” K#: K23721

3 A (3) GR# B3607 Grapples (UNUSED)

Catch Sizes; 2-3/8” Basket, 3-1/2” & 3-1/16” Spiral Grapples w/ (1) Control K#: K30931

3 A (3) GR# 10563 Short Catch

Grapples (UNUSED) w/ (1) Control Catch Sizes; (2) 4-5/8”, 4-3/8” K#: K31001


(Unused) Catch Sizes; 2-1/8”, (2) 1-15/16” K#: K31057


Grapples (UNUSED) Catch Sizes; 5-3/4”, 5-5/8”, 5-1/8” K#: K31009

3 A (3) GR# B3607 Basket Grapples (UNUSED) Catch Sizes; 2-7/8”, 2-3/8”, 2-3/4” RHW K#: K30930


(UNUSED) Catch Sizes; 2-3/8”, (2) 2-19/32 K#: K30928


Grapples (UNUSED) Catch Sizes; 4-1/8”, 3-1/4”, 2” K#: K31006

Items Sell: 1:25 PM-1:30 PM 3 A (3) GR# 6662 RHW Basket Grapples

(UNUSED) Catch Sizes; 3”, 3-1/16”, 2-19/32” w/ Stop K#: K23719


(UNUSED) w/ (1) Control & Type A Packer Catch Sizes; 3-21/32”, (2) 3-3/8” K#: K23722


(UNUSED) w/ Controls (2) 2-3/4” NIT & (1) 3-1/8” K#: K30942




3 A (3) GR# 6662 RHW Basket Grapples (UNUSED) Catch Sizes; 2-19/32” LCS, 3-1/16”, 3-19/32”, w/ Stops K#: K23718




(UNUSED) w/ Controls Catch Sizes; (2) 2-1/4” & 2-3/8” K#: K30949


(UNUSED) w/ (1) Control Catch Sizes; 7/8”, 1-3/4”, 2-3/8” K#: K30946


(UNUSED) w/ (1) Control & Type A Packer Catch Sizes; (3) 3 1/16” K#: K30969

3 A (3) GR #37590 Grapples (UNUSED)

Catch Sizes; (1) 2-3/8” Basket & (2) 2.900” Spirals K#: K30975

3 A (2) GR# 9268 Spear Grapples (Unused) Catch Sizes; 6.564” & 7.187” K#: K31099


(Unused) Catch Sizes; 1-3/8”, (2) 1.660 K#: K31052



Items Sell: 1:30 PM-1:35 PM 3 A (3) GR# B11026 Short Catch

Grapples (UNUSED) Catch Sizes; 3”, (2) 3-3/8” K#: K30996


(UNUSED) w/ (1) Control Catch Sizes; 2-3/8”, 2-1/8”, 3” K#: K30925


(UNUSED) w/ (1) Control Catch Sizes; 2-3/8” RHW, 2-1/8”, 2” K#: K30951




3 A (2) GR #10437 Short Catch Grapples (UNUSED) w/ (1) Control Catch Sizes; 2” & 3” K#: K30983


(UNUSED) w/ (2) Controls Catch Sizes; 2.702”, 2-1/16”, 1-7/16” K#: K30945

3 A (3) GR# B11026 Short Catch



Grapples (UNUSED) & (3) Controls Catch Sizes; (2) 1-1/16”, 1-1/4”, 1-3/8” K#: K31079

3 A (3) GR#1348 Spear Grapples

(Unused) Catch Sizes-2.289”, 2.131”, 2.396” K#: K26022


(UNUSED) w/ Controls Catch Sizes; 4-1/8”, (2) 2-7/8” K#: K30943

3 A (3) GR #37590 Spiral Grapples (UNUSED) w/ (1) Control & Type A Packer Catch Sizes; (2) 2-7/8” (1-RHW), 3-1/16” K#: K30972




(UNUSED) Catch Sizes; (2) 3-1/16”, 2-7/8” K#: K30974

Items Sell: 1:35 PM-1:40 PM 3 A (3) GR #37590 Spiral Grapples

(UNUSED) w/ (1) Control Catch Sizes; 3”, 2.900”, 2-7/8” K#: K30971


(Unused) Catch Sizes; 7.187” & 7.689” K#: K31100






3 A (2) 5 ½” GR# 8619 Spiral Grapples (UNUSED) w/ (1) Control K#: K23657




(UNUSED) w/ (1) Control Catch Sizes; 2-19/32”, 3”, 2-3/8” K#: K30924




(Unused) Catch Sizes; 1-9/16”, (2) 1-5/8” K#: K31053


(UNUSED) w/ Controls Catch Sizes; 3-1/8” & (2) 3-1/16” K#: K30944



3 A (3) GR# 9862 Spear Grapples (Unused) Catch Sizes- (2) 4.805, 4.961 K#: K26009


(Unused) Catch Sizes; 1-7/16”, 1-1/4”, 1-13/16” K#: K31071

Items Sell: 1:40 PM-1:45 PM 3 A (3) GR# B11026 Short Catch


3 A (3) GR# B11026 Short Catch



(UNUSED) w/ (2) Controls Catch Sizes; (2) 2” & 2-3/16” K#: K30950


(Unused) (3) GR#1348 Spear Grapples (Unused) K#: K26020




3 A (4) GR#11197 Spear Grapples (3 Unused) Catch Sizes- 1.606”, 1.757”, 1.367”, 1.516 K#: K26025


(UNUSED) w/ (1) Control Catch Sizes; 1-7/8”, 1-1/4”, 2-13/16” & 2” ID Stop K#: K30954




(Unused) Catch Sizes; 5.970”, 6.220”, 6.095” K#: K31097




(Unused) Catch Sizes- 2.766”, 2.748”, 3.203” K#: K26018

3 A (3) GR# 9487 Spear Grapples (Unused) Catch Sizes- 4.479”, 3.557”, 3.291” K#: K26011


(Unused) Catch Sizes; 1-9/16”, 1-3/16”, 1-1/4” K#: K31070

Items Sell: 1:45 PM-1:50 PM 3 A (3) GR# 9403 NIT Short Catch

Grapples (UNUSED) Catch Sizes; 1-1/2”, 1-5/8” 1-3/8” K#: K31065




(UNUSED) & (1) Packer Catch Sizes; (2) 1-13/16” & 2” K#: K31056

3 A (3) GR# 9403 Short Catch Spiral

Grapples (UNUSED) Catch Sizes; 1-7/8”, 2”, 1-15/16” K#: K31076




3 A (3) GR#1348 Spear Grapples (Unused) Catch Sizes- 2.460”, 2.226”, 2.211” K#: K26023


(Unused) Catch Sizes; (2) 1-9/16” & 1-3/4” K#: K31054


(UNUSED) & (1) Control (Unused) Catch Sizes; 1-15/16”, 2”, 2-1/8” K#: K31055


(Unused) Catch Sizes; 2.460”, 1.992”, 1.929” K#: K31089


(Unused) Catch Sizes; 1.660”, (2) 1.3/4” K#: K31051


(Unused) Catch Sizes; (2) 1-15/16”, (2) 1-7/8” K#: K31058

3 A (3) GR# 10563 Short Catch Grapples (UNUSED) w/ (1) Control Catch Sizes; 4-3/4”, 4-3/8”, 3-7/8” K#: K31002


(UNUSED) Catch Sizes; (2) 7/8”, 3/4”, 1” K#: K31075


(UNUSED) Catch Sizes; (2) Short Catch 2” & 1-7/8”, (1) Reg. 1-7/8” K#: K31077


(UNUSED) w/ (1) Control & Type A Packer Catch Sizes; 3”, (2) 2.900” K#: K30968


(UNUSED) Catch Sizes; 2-19/32”, 2-7/8”, 3” & (1) 3-1/4” Stop K#: K23720


(UNUSED) Catch Sizes; 3/4”, 7/8”, 1” K#: K31074




3 A (2) GR# 9123 3-3/4" Catch Spiral Grapples (UNUSED) w/ Controls K#: K30948


Grapples (UNUSED) Catch Sizes; 4”, 4-3/4”, 1-3/4” K#: K31005


(UNUSED) w/ (1) Control Catch Sizes; (3) 2-3/4” K#: K30970


(Unused) Catch Sizes- 2.398”, 1.992”, 1.828” K#: K26019

3 A (4) GR#11197 Spear Grapples (3

Unused) Catch Sizes-1.875”, 1.215”, 1.554”, 1.246” K#: K26026




(Unused) 4.027, (2) 4.010 K#: K26012

11 O QTY (1) 14-1/2” OD Overshot Body W/6-5/8” REG CONN K#: K22362*

Items Sell: 1:55 PM-2:00 PM 3 A (6) Crossover Sub

2-3/8” 8-Round Pin x 2-7/8” Reg Box, 2-3/8” 8-Round Pin x 2-3/8” Reg Box, 2-3/8” PAC Pin x 2-3/8” Reg Box, 2-3/8” CS Pin x 2-3/8” CS Box, 2-3/8” Reg Pin x 2-3/8” Reg Box, 1” CS x 1” CS (Float Sub) K#: K30124

3 A (5) Crossover Subs

2-1/16” CS Pin x 2-7/8” 8-Round Box, 3-1/2” PH6 Pin x 2-7/8” 8-Round Box, 2-7/8” Reg Pin x 2-7/8” 8-Round Box, 2-3/8” DSS HTX x 2-7/8” 8-Round Box, 2-7/8” DSS Pin x 2-7/8” 8-Round Box K#: K30054

3 A (5) Box x Box Crossover Subs

2-7/8” 8-Round x 2-7/8” Reg., 2-3/8” 8-Round x 2-7/8” Reg., 2-3/8” IF x 2-3/8” IF, 2-7/8” PH-6 x 2-3/8” Reg. 2-3/8” IF x 2-7/8” Reg. K#: K31044




3 A (6) Crossover Subs 2-3/8” FH Pin x 2-7/8” 8-Round Box, 2-7/8” DSS x 3-1/2” FH Box, 3-1/2” FH Pin x 2-7/8” 8-Round, 2-3/8” Reg Pin x 2-7/8” PH6 Box, 2-7/8” IF Pin x 2-7/8” PH6 Box, 3-1/2” IF Pin x 3-1/2” Reg Box K#: K30122


(2) 2-3/8” Reg. x 2-3/8” PH6, (2) 2-3/8” 8-Round x 2-3/8” Reg., 2-7/8” PAC x 2-3/8” Reg. K#: K31040


2-3/8” IF Pin x 2-3/8” PH6 Box, 2-3/8” PH 6 Pin x 2-3/8” PH6 Box, 2-3/8” IF Pin x 2-3/8” PH6 Box, 2-3/8” Reg Pin x 2-3/8” PH6 Box, 2-7/8” 8-Roud Pin x 2-3/8” Reg Box K#: K30077


3-1/2” CS Pin x 2-7/8” 8-Round Box, 3-1/2” IF Pin x 2-7/8” 8-round Box, 5-1/2” 8-Round Pin x 2-7/8” 8-Round Box, 2-3/8” IF Pin x 2-7/8” 8-Round Box, 2-7/8” IF Pin x 2-7/8” 8-Round K#: K30056

3 A (5) Crossover Subs 2-3/8” IF Pin x 2-3/8” IF Pin, 2-3/8” PH6 Pin x 3-1/2” Reg Pin, 2-7/8” 8-Round Pin x 3-1/2” Reg Pin, 2-7/8” IF Pin x 3-1/2” Reg Pin, 2-3/8” PH6 Pin x 2-3/8” 8-Round Pin K#: K30126


2-3/8” PH Pin x 2-3/8” 8-Round Box, 1-1/2” NU 10-Round Pin x 2-3/8” 8-Round Box, 2-3/8” Reg. Pin x 2-3/8” 8-Round Box, 1-1/4” 10-Round Pin x 2-3/8” 8-Round Box, 2-3/8” CS Pin x 2-3/8” 8-Round Box K#: K30046


2-3/8” Ph6 Pin x 2-3/8” 8-Round Box, 2-3/8” Reg Pin x 2-3/8” 8-Round Box, 2-3/8” IF Pin x 2-3/8” 8-Round Box, 1-1/4” 10-Round Pin x 2-3/8 8-Round Box, 1-1/4” CS Pin x 2-3/8 8-Round Box K#: K30044

3 A (5) Swivel Subs

2-7/8” PH6, 2-7/8” 8-Round, 1/2” CS, 2-7/8” 8-Round, 2-3/8” PH6 K#: K30082


2-7/8” REG Pin x 2-3/8” REG Box, 2-7/8” 8-Round Pin x 2-3/8” 8-Round Box, 2-3/8” 8-Round Pin x 2-3/8” CS Box, 2-3/8” PH-6 Pin x 2-7/8” CS Pin, 2-7/8” 8-Round Pin x 3” Line Pipe Box K#: K30034




Items Sell: 2:00 PM-2:05 PM 3 A (5) Crossover Subs

2-7/8” PH6 Pin x 2-7/8” 8-Round Box, 2-3/8” 8-Round Pin x 2-7/8” 8-Round Box, 2-3/8” 8-Round Pin x 2-7/8” IF Box, 2-7/8” 8-Round Pin x 2-7/8” Ph6 Box, 2-3/8” IF Pin 2-7/8” PH6 Box K#: K30064


2-3/8” IF Pin x 2-7/8” Reg Pin, 2-3/8” 8-Round Pin x 3-1/2” Reg Pin, 2-3/8” PH6 Pin x 2-7/8” Reg Pin, 2-3/8” Reg Pin x 2-3/8” Reg Pin, 2-3/8” PH6 Pin x 2-3/8” Reg Pin, 2-7/8” Reg Pin x 2-3/8” PH6 Pin K#: K30125


2-3/8” Ph6 Pin x 2-7/8” Ph6 Box, 2-7/8” 8-Round Pin x 2-7/8” PH6 Box, 2-7/8” VAM Pin x 2-7/8” Ph6 Box, 2-3/8” 8-Round Pin x 2-7/8” PH6 Box, 2-7/8” IF Pin x 2-7/8” DSS Box, 2-3/8” IF Pin x 2-7/8” PH6 Box K#: K30069


2-3/8” Reg. x 2-7/8” Reg. (2) 2-3/8” Reg. x 2-3/8” Reg. 2-7/8” 8-Round x 2-7/8” Reg. 2-3/8 Ph6 x 2-7/8” Reg. K#: K31034

3 A (9) Crossover Subs 1-1/2" NU 10-Round Pin x 1-1/2” CS Box, 1-1/4” EU Pin x 1-1/2” NU 10-Round Box, 1-1/4” CS Pin x 1” CS Box, 1-13/16” WFJ x 1” LP Box, 1” CS Pin x 1-1/2” CS Box, 1-1/2” NU Pin x 1-1/4” NU 10-Round Box, 1” CS BOX x 1” CS BOX, 1-1/4” MT Pin x 1-1/4” CS Box, 1” Pin SR x 1-13/16” WFJ Box---- K#: K30128


2-7/8” Reg Pin x 2-7/8” 8-Round, 2-3/8” PAC Pin x 2-3/8” Reg, 2-3/8” PH6 Pin x 2-7/8” Reg, 2-7/8” CS Pin x 2-7/8” 8-Round, 2-7/8” PH6 Pin x 2-7/8” 8-Round, 2-7/8” IF Pin x 2-7/8” IF K#: K30127


2-7/8” 8-round Pin x 2-3/8” Ph6 Box, 2-3/8” IF Pin x 2-3/8” Ph6 Box, 2-3/8” 8-Round Pin x 2-3/8” Ph6 Box, 2-3/8” 8-Round Pin x 2-3/8” Ph6 Box, 2-3/8” 8-Round Pin x 2-3/8” PH6 Box, K#: K30042


2-7/8” IF x 4-1/2” Reg, 2-3/8” PH6 x 3-1/2” Reg., 2-7/8 PH6 x 3-1/2” Reg., 4-1/2” FH x 4-1/2” Reg., 3-1/2” IF x 3-1/2” Reg. 3-1/2” Reg. x 4-1/2” FH K#: K31029




3 A (5) Swivel Subs 2-3/8” IF, 2-3/8” 8-Round, 2-3/8” PH6, 2-7/8” 8-Round, 2-3/8” PH6 K#: K30083


2-3/8” 8-Round Pin x 2-3/8” PAC Box, 2-7/8” PAC Pin x 2-3/8” PAC Box, 2-3/8” PH6 x 2-3/8” PAC Box, 2-3/8” PAC Pin x 2-3/8” PH6 Box, 2-3/8” Reg Pin x 2-7/8” PAC Box K#: K30087


NC44 Pin x 4-1/2” Reg Pin (Pin x Pin), 4-1/2” IF Pin x 3-1/2” FH Box, 4-1/2” IF Pin x 4-1/2” Reg Box (Pin x Pin), 5-1/2” H-90 Pin x 4-1/2” FH Box K#: K30097


2-7/8” IF Pin x 2-3/8” PH6 Box, 2-3/8” IF Pin x 2-3/8” PH6 Box, 2-3/8” Reg Pin x 2-3/8” Ph6 Box, 2-7/8” 8-Round Pin x 2-3/8” 8-Round Box, 2-3/8” 8-Round Pin x 2-3/8” PH6 Box K#: K30040


4-1/2” FH Pin x 6-5/8” Reg Box, 4” H-90 Pin x 4-1/2” XH Box, 4-1/2” FH Pin x 4-1/2” XH Box, 2-3/8” PH6 Pin x 2-3/8” IF Box, 2-3/8” 8-Round Pin x 2-3/8” IF Box- K#: K30099

3 A (5) Box x Box Crossover Subs 2-1/16" CS x 4-Thrd N-Rod, 2-3/8” 8-Round x N-Rod, 2-3/8” CS x N-Rod, 2-3/8” CS x 2-3/8” CS, 2-3/8” PH6 x 2-3/8 PH6 K#: K31039


2-7/8” 8-Round Pin x 2-7/8” SL Box, 2-7/8” IF Pin x 2-7/8” DSS HT Box, 2-3/8” 8-Round x 2-3/8” Buttress Box, 2-7/8” IF Pin x 2-7/8” PH6 Box, 2-7/8” 8-Round Pin x 2-7/8” CS Box, 2-7/8” IF Pin x 2-7/8” DSS Box K#: K30072


(3) 3-1/2” IF x 3-1/2” Reg. 2-7/8” 8-Round x 3-1/2” Reg. 2-7/8” IF x 2-7/8” IF K#: K31032


2-7/8” CS Pin x 2-7/8” 8-Round Box 2-3/8” 8-Round x Guide Sub, 2-7/8” CS x 2-7/8” 8-Round Box 3-1/2” IF Pin x 2-7/8” 8-Round Box, 2-3/8” 8-Round x 2-7/8” 8-Round Box K#: K30062


4-1/2" FH x 6-5/8” Reg Stabilizer Bit, 4-1/2" FH x 2-7/8” IF, 4-1/2” FH x 6-5/8” Reg, 6-5/8” Reg x 6-5/8” Reg K#: K31023




3 A (5) Crossover Subs 2-7/8” CS Pin x 2-3/8” IF Box, 2-7/8” 8-Round Pin x 2-3/8” Box, 2-3/8” PH6 Pin x 2-3/8” IF Box, 2-3/8” Reg Pin x 2-3/8” IF Box, 2-3/8” Reg Pin x 2-3/8” IF Box, K#: K30092


2-3/8” 8-Round Pin x 2-7/8” IF Box, 2-3/8” Reg Pin x 2-7/8" PH6 Box, 2-7/8” Reg. Pin x 2-7/8” IF Box, 2-3/8” Ph6 Pin x 2-7/8” PH6 Box, 2-7/8” 8-Round x 2-7/8” CS Box, 2-3/8” IF Pin x 2-7/8” Ph6 Box, K#: K30066


3-1/2” 8-Round Pin x 2-7/8” 8-Round Box, 3-1/2” 8-Round Pin x 2-7/8” 8-Round Box, 3-1/2” CS Pin x 2-7/8” 8-Round Box, 2-7/8” VAM Pin x 2-7/8” 8-Round Box, 2-7/8” IF Pin x 2-7/8” 8-Round Box K#: K30058


2-3/8” DSS Pin x 3-1/2” DSS Box, 2-7/8” 8-Round Pin x 2-7/8” 10-Rod, 2-7/8” 8-Round Pin x 2-7/8” PH6 Box, 2-3/8” IF Pin x 2-7/8” CS Box, 2-7/8” CS Pin x 2-7/8” CS Box, 2 7/8” IF Pin x 2-7/8” Ph6 Box K#: K30074

3 A (5) Crossover Subs 2-7/8” 8-Round Pin x 2-7/8” 10-Round EU Box, 2-7/8” 8-Round Pin x 2-7/8” Buttress Box, 2-7/8” DSS Ht Pin x 2-7/8” DSS HT Landing Nipple, 2-3/8” IF Pin x 2-7/8” VAM Box, 2-3/8” Reg Pin x 2-7/8” SL Box K#: K30075


2-3/8 Reg. x 2-7/8 Reg., 2-7/8” 8-Round x 2-7/8” Reg., 2-7/8” IF x 2-7/8” PH6, 2-7/8” 8-Round x 2-7/8” Reg., 2-3/8” IF x 2-7/8” Reg K#: K31043

Items Sell: 2:10 PM-2:15 PM 3 A (5) Box x Box Crossover Subs

(2) 2-3/8” 8-Round x 2-3/8” Reg. (2) 2-3/8” PH6 x 2-7/8” Reg. 2-3/8” Reg. x 2-3/8” Reg. K#: K31035


2-7/8” PAC Pin x 2-7/8” 8-Round Box, 2-3/8” Reg. Pin x 2-3/8” Pac Box, 2-3/8” WFJ x 2-3/8” PAC Box, 2-3/8” PAC Pin x 2-7/8” PH6 Box, 2-3/8 IF Pin x 2-7/8” PAC Box, K#: K30089


(2) 2-7/8” 8-Round x 2-7/8” Reg., 2-3/8” PAC x 2-3/8” Reg., 2-7/8” DSS x 2-7/8” Reg., 2-7/8” IF x 2-7/8” Reg. K#: K31042




3 A (6) Crossover Subs 4-1/2” XH Pin x 4-1/2” Reg Box, 4-1/2” FH Pin x 4-1/2” IF Box, 5-1/2” Reg Pin x 4-1/2” FH Box, 6-5/8” Reg Pin x 4-1/2” FH Box, 5-1/2” FH Pin x 4-1/2” XH Box, 2-7/8” PL6 Pin x 4-1/2” FH Box K#: K30112


4-1/2” XH x 6-5/8” Reg, 5-1/2” Reg x 6-5/8” Reg, 3-1/2” Reg x 7” WP, 9" PFT x 6-5/8” Reg K#: K31024


2-7/8” 8-round Pin x 2-7/8” Buttress Box, 2-7/8” 8-Round Pin x 2-7/8” Reg Box, 2-3/8” IF Pin x 2-3/8” IF Box Drain Sub, 2-7/8” IF Pin x 2-7/8” Buttress Box, 2-7/8” 8-Round Pin x 2-7/8” Acme Box K#: K30076


1-1/2” DSS Pin x 1-1/2” CS Box, 1-1/4” EUE 10-Round Pin x 1” SR Box, 1-13/16” WFJ x 1-1/4” 10-Round Box, 1-13/16 WFJ x 1-1/4” CS Box, 1-1/2” UE 10-Round Pin x 1-1/2”CS, A-ROD x 1-13/16” WFJ (Box x Box), 1-13/16” WFJ x 2-7/8” 8-Round Box, 1-1/4” Reg Pin x 1-1/4” Reg Box (Drain Box), 1-1/4” CS Pin x 1-1/2” EUE 10-Round, 1” CS Pin x 1” CS Box, 1-1/4” CS Pin x 2” LP Box K#: K30130

3 A (5) Crossover Subs 2-3/8” PH6 Pin x 2-3/8” IF Box, 2-3/8” IF Pin x 2-3/8” IF Box, 2-3/8” PH6 Pin x 2-3/8” IF Box, 2-3/8” PH6 Pin x 2-3/8” IF Box, 2-7/8” PH6 Pin x 2-3/8” IF Box K#: K30100


2-3/8” IF Pin x 3-1/2” IF Box, 2-7/8” PH6 Pin x 3-1/2” IF Box, 2-7/8” 8-Round x 3-1/2” IF Box, 3-1/2” CS Pin x 3-1/2” 8-Round Box, 3” LP Pin x 3-1/2” IF Box K#: K30120


2-3/8” Reg. x 2-3/8” Reg., 2-7/8” 8-Round x 2-3/8” Reg., 2-3/8” IF x 2-3/8” 8- Round., 2-3/8” IF x 2-3/8” Reg., 2-3/8” PH6 x 2-7/8” IF K#: K31041

3 A (5) Box x Box Crossover Subs & (1)

Drag Bit Drag Bit- 7-7/8” OD. Crossovers- 2-7/8” IF x 4-1/2” FH, 2-7/8” FH x 4-1/2” FH, 4-1/2" XH x 4-1/2” Reg, 3-1/2” IF x 4-1/2" Reg, 6-5/8” x 7-5/8” Reg K#: K31022




3 A (5) Crossover Subs 2-3/8” 8-Round Pin x 2-3/8” CS Box, 2-7/8” 8-Round Pin x 2-3/8” CS Box, 2-7/8” 8-Round Pin x 2-1/8” 8-Round Box, 2-7/8” DSS Pin x 2-7/8” 8-Round Pin, 2-3/8” 8-Round Pin x 3” Line Pipe Box, K#: K30033

Items Sell: 2:15 PM-2:20 PM 3 A (4) Box x Box Crossover Subs

3-1/2” 8-Round x 2-7/8” Reg, 4-1/2" IF x 4-1/2” Reg, 4-1/2” FH x 4-1/2” Reg, 2-3/8” CT x 4-1/2” FH K#: K31026


3-1/2” IF Pin x 5” H-90 Box, 4-1/2” FH Pin x 5” H-90 Box, 6-5/8” Reg (Left Hand) Pin x 5-1/2” Reg Box 3-1/2” IF Box x 3-1/2” NU Pin 4-1/2” XH Pin Cutlip Pin x 4-1/2” IF Box (Screw in Sub w/ Drain) 4-1/2” XH Pin Cutlip Pin x 4-1/2” IF Box (Screw in Sub) K#: K30095


4-1/2” XH Pin x 4-1/2” XH Box, 4-1/2” Reg Pin x 3-1/2” IF Pin, 2-7/8” PH6 Pin x 2-3/8” IF Box, 3-1/2” 8-Round Pin x 4-1/2” XH Box, 4-1/2” Reg Pin x 4-1/2” XH Box K#: K30093

3 A (4) Crossover Subs 2-3/8” Ph6 Pin x 2-3/8” 8-Round Box, 2-3/8” CS Pin x 2-3/8” 8-Round Box, 2-3/8” Ph6 Pin x 2-3/8” 8-Round Box, 2-7/8” VAM ACC Pin x 2-3/8” 8-Round K#: K30048


4-1/2” IF Pin x 4-1/2” Reg Pin, 4-1/2” XH Pin x 4-1/2” IF Box, 4-1/2” IF Pin x 5” H-90 Box, 4-1/2” FH Pin x 4-1/2" FH Box (Circulating Sub) K#: K31021


2-3/8” PH-6 Pin x 2-3/8” Ph-6 Box (Bent 2 Deg.), 2-3/8” 8-Round Pin x 2-3/8” Reg Box, 2-3/8” IF Pin x 2-3/8” PH6 Box, 2-3/8” Reg Pin x 2-3/8 PH6 Box, 2-7/8 Reg Pin x 2-3/8” Reg Box K#: K30038


2-3/8” IF Pin x 2-7/8 8-Round Box, 2-7/8” Ph6 Pin x 2-7/8” 8-Round Box, 2-3/8” PH6 Pin x 2-7/8” 8-Round Box, 2-7/8” CS Pin x 2-7/8” 8-Round Box, 2-3/8” Reg Pin x 2-7/8” 8-Round Box K#: K30061




3 A (5) Crossover Subs 2-3/8” IF Pin x 2-3/8” 8-Round Box, 2-7/8” PH6 Pin x 2-3/8” 8-Round Box, 2-1/16” CS Pin x 2-3/8” 8-Round Box, 2-7/8” IF Pin x 2-3/8” 8-Round Box, 2-3/8” 8-Round Pin x 2-3/8” Ph6 Box K#: K30043


3-1/2” CS Pin x 3-1/2” 8-Round Box, 2-7/8” 8-Round Pin x 3-1/2” IF Box, 3-1/2” FH Pin x 2-7/8” 8-Round Box, 2-7/8” PH6 x 3-1/2” IF Box, 2-7/8” IF Pin x 3-1/2” IF Box K#: K30121


(2) 3-1/2” VAM Pin x 2-7/8” 8-Round Box, 2-7/8” SL Pin x 2-7/8” 8-Round Box, 2-7/8” K-FOX x 2-7/8” 8-Round Box K#: K30086


2-7/8” PH6 x 2-7/8” PH6., 1-1/8” 8-Round x 1-1/16 CS, 2-3/8” CS x 2-3/8” Reg., (2) 2-3/8” 8-Round x 2-3/8” Reg. K#: K31038


2-7/8” 8-Round x 3-1/2” Reg., 3-1/2” 8-Round x 3-1/2” Reg. 2-7/8” 8-Round x 3-1/2” Reg 2-3/8” PH6 x 2-3/8” Reg. 2-3/8” 8-Round x 3-1/2” Reg., 3-1/2” Reg. x 3-1/2” IF. K#: K31031


3-1/2” IF Pin x 4-1/2” Reg Box, 4-1/2” FH Pin x 4-1/2” Reg Box, 6-5/8” Reg Pin x 5-1/2” FH Box, 2-3/8” IF Pin x 4-1/2” H-90 Box K#: K30115


2-3/8” 8-Round x 2-7/8” Reg., 2-3/8” PH-6 x 2-3/8” Reg., 2-7/8” PAC x 2-3/8” Reg., 2-3/8” IF x 2-7/8” Reg., 2-3/8” PH-6 x 2-7/8” Reg. K#: K31045


2-7/8” IF x 3-1/2” Reg., 2-3/8” PAL x 3-1/2” Reg., 2-3/8” IF x 3-1/2” Reg., 2-7/8” PH2 x 3-1/2” Reg., (2) 2-7/8” IF x 3-1/2” Reg., K#: K31030


3-1/2” FH (Left Hand) Pin x 3-1/2” IF LH (Left Hand), 5-1/2” 8-Round Pin x 2-7/8” 8-Round Box, 3-1/2” XH Pin x 3-1/2” Reg Box, 3-1/2” 8-Round Pin x 3-1/2” Buttress Box Sub, 3-1/2" IF Pin x 4-1/2” IF Box K#: K30119

3 A (5) Swivel Subs

Pin Sizes: 2-7/8” PH6, 2-3/8” 8-Round, 2-3/8” IF, 2-7/8” PH6, 2-3/8” Ph6 K#: K30080




3 A (5) Crossover Subs 2-3/8” IF Pin x 2-7/8” 8-Round Box, 2-7/8” VAM Pin x 2-7/8” 8-Round Box, 2-3/8” Ph6 Pin x 2-7/8” 8-Round Box, 1-1/2” NU Pin x 2-7/8” 8-Round Box, 2-7/8” PH6 x 2-7/8” 8-Round Box K#: K30059


2-3/8” 8-Round x 2-7/8” Reg. 2-3/8” IF x 2-7/8” Reg. 2-7/8” DSS x 2-7/8” Reg. (2) 2-3/8” PH6 x 2-7/8” Reg. K#: K31033


4-1/2” XH Pin x 5” H-90 Box, 4-1/2” IF Pin x 4-1/2” IF Pin (Pin x Pin) 4-1/2” IF Pin x 7-5/8” 8-Round Box, 4-1/2” IF Pin x 5” H-90 Box 8-Round, 3-1/2” IF Pin x 5” H-90 Box, 5” H-90 Pin x 4-1/2” R-eg Pin (Pin x Pin) K#: K30096


4-1/2” XH Pin x 4-1/2” XH Box, 4-1/2” IF Pin x 3-1/2” FX Box, 4-1/2” Reg Pin x 4-1/2” Reg Box, 2-7/8” IF Pin x 4-1/2” Reg Box, 4-1/2” IF Pin x 4 H-90 Reg Box K#: K30098

3 A (11) Crossover Subs (2) 2-7/8” PH6 P x 2-7/8” PH6 (Pin x Pin), 1-13/16” WFJ x 4-Thread N-Rod (Pin x Box), 2-3/8” CS Pin x 2-1/16” CS Box, 1-1/4” CS Pin x 2-3/8” 8-Round Box (F/3-1/4” Stop Sub) 2-7/8” 8-Round Pin x 2-7/8” Box, 1” CS Pin x 1” CS Box x 2” OD, 1-13/16 WFJ x 2-1/16” CS (Pin x Pin), 1-1/2” 10-Round Pin x 2-1/16” CS Box, 2-3/8” PH6 x 2-7/8” Reg (Shear Sub), 2-7/8” CS Pin x 2-7/8” CS Box---- K#: K30132


2-3/8” Pac x 2-3/8” Reg., (2) 2-3/8” 8- Round x 2-3/8” Reg., 2-3/8” Reg. x 2-7/8” Reg. 2-3/8” PH6 x 2-7/8” Reg. K#: K31036

3 A (5) Swivel Subs

Pin Sizes: 2-3/8” IF, 2-7/8” 8-Round, 2-3/8” 8-Round, 2-7/8” 8-Round, 2-3/8” PH6 K#: K30078

Items Sell: 2:25 PM-2:30 PM 3 A (4) Crossover Subs + (1) Swedge

4-1/2” FH Pin x 3-1/2” Reg Box, 4-1/2” FH Pin x 3-1/2” Reg Box, 4-1/2” FH Pin x 3-1/2” Reg Box, 3-1/2” IF Pin x 3-1/2” Reg Box, 5-1/2” 8-Round x 7” (Swedge) K#: K30109




3 A (5) Crossover Subs 2-3/8” 8-Round Pin x 2-7/8” 8-Round Box, 2-1/2” IF Pin x 2-7/8” 8-Round Box, 2-7/8” 8-Round Pin x 2-7/8” 8-Round Box, 2-3/8” CS Pin x 2-7/8” 8-Round Box 2-7/8” DDS x 2-7/8” 8-Round Box K#: K30063

3 A (4) Crossover Subs & (1) Swedge

7” Buttress Pin x 5-1/2” 8-Round Box, 7” Annular Thread x 2-7/8” 8-Round, 3-1/2” IF Pin x 3-1/2” DSS Box, 5-1/2” Buttress Pin x 2-7/8” 8-Round Box 2-7/8” 8-Round Pin x 7” 8-Round Swedge, K#: K30118


2-3/8” PAC Pin x 2-7/8” PAC Box, 2-7/8” PAC Pin x 2-3/8” PAC Box, 2-5/8” CS Pin x 2-3/8” PAC Box, 2-3/8” PAC Pin x 2-3/8” 8-Round Box K#: K30103


2-3/8” IF Pin x 2-3/8” 8-Round Box, 2-3/8” CS Pin x 2-3/8” 8-Round Box, 2-3/8” Reg Pin x 2-3/8” 8-Roun Box, 1-1/2” CS Pin x 2-3/8” 8-Round Box, 2-3/8” CS Pin x 2-3/8” 8-Round Box K#: K30045

3 A (5) Crossover Subs 4-1/2” H-90 Pin x 3-1/2” IF Box, 4-1/2” Reg Pin x 4-1/2” FH Box, 4-1/2” XH Pin x 4-1/2” FH Box, 4-1/2” XH Pin x 4-1/2” FH Box, 4-1/2” FH Pin x 3-1/2” XH K#: K30111


2-7/8” IF Pin x 2-7/8” IF Box, 2-3/8” IF Pin x 2-7/8” Ph6 Box, 2-7/8” IF Pin x 2-7/8” PH6 Box, 2-3/8” Ph6 Pin x 2-7/8” PH6 Box, 2-7/8” DDS Pin x 2-7/8” PH6 Box K#: K30065


3-7/8” PH-6 Pin x 2-3/8” Reg Box, 2-3/8” 8-Round x 2-3/8” Reg Box, 1-1/2” NU 10-Round x 2-3/8” CS Box, 2-3/8” IF Pin x 2-3/8 Reg Box, 1-1/4” CS Pin x 2-3/8” PH-6 Box, K#: K30037


2-7/8” 8-Round x Blank, 2-3/8” 8-Round Pin x 2-7/8” Box w/ 4-1/2” OD Stop, 2-3/8” 8-Round x 2-7/8” (Pin x Box Sub), 2-7/8” 8-Round Box x Blank, 2-7/8” XL x 2-7/8” 8-Round (Pin x Box Sub), 4-1/2” RO Pin x Blank Sub, 4 N-Rod. K#: K30134




3 A (6) Crossover Subs 1-1/2” EUE 10-Rod Pin x 2-7/8” DSS Box, 2-7/8” IF Pin x 2 7/8” PH6 Box, 2-7/8” 8-Round x 2-7/8” VAM Box, 2-7/8” IF Pin x 3-1/2” DSS Box, 2-7/8” 8-Round Pin x 2-7/8” DSS Box, 2-7/8” IF Pin x 2-7/8” DSS Box K#: K30071


4-1/2” IF Pin x 4-1/2” 8-Round Box, 4-1/2” FH Pin x 4-1/2” FH Box (Drain Sub), 4-1/2” PH6 Pin x 4-1/2” H-90 (Screw In Sub), 5” H-90 Pin x 4-1/2” FH Box K#: K30114


4-1/2” FH Pin x 4-1/2” XH Box, 6-5/8” Reg Box x 4-1/2” IF Box, 4-1/2” XH Pin x 4-1/2” XH Box, 4-1/2” XH Pin x 4-1/2”8-Round Box K#: K30094

Items Sell: 2:30 PM-2:35 PM 3 A (10) Crossover Subs & (1) Coupling

2-7/8” 10-Round NU Pin x 2-7/8” CS Pin, 1-1/4” Reg Pin x 1-1/4” CS Box, 2-7/8” 8-Round Pin x 2-3/8” FL-S Box, 5/8” SR x 1-13/16” WFJ (Pin x Box), 2-3/8” 8Rd x 1-1/2” CS (Pin x Box), 1-1/4” NU x 1-12” CS (Pin x Box), 1-1/4” Reg x 7/8” SF (Pin x Box), 1-7/8” SR Coupling, 2-7/8” DSS Pin x 2-7/8” DSS Pin, 1-1/2” CS Pin x 1-1/4” CS Box, 1-1/2” CS Box x 1-13/16” WFJ Box- K#: K30131


3-1/2” IF Pin x 2-3/8” IF Box, 4-1/2” FH Pin x 2-7/8” IF Box, 4-1/2” FH Pin x 2-7/8” IF Box, 3-1/2” IF Pin x 2-7/8” IF Box K#: K30107


1” CS Pin x 2-3/8” 8-Round Box, 2-3/8” SL Pin x 2-3/8” 8-Round Box, 2-7/8” DSS Pin x 2-3/8” 8-Round Box, 2-7/8” IF Pin x 2-3/8” 8-Round Box 2-7/8” 8-Round Pin x 2-3/8” 8-Round Box K#: K30049


2-7/8” PAC Pin x 2-3/8” PAC Box, 2-3/8” PAC Pin x 2-3/8” IF Box, 2-3/8” PAC Pin x 2-3/8” IF Box, 2-3/8” PAC Pin x 2-3/8” 8-Round Box 2-3/8” Reg Pin x 2-7/8” PAC Box K#: K30104




3 A (5) Crossover Subs 2-7/8” IF Pin x 2-7/8” IF Box Drain Sub, 2-3/8” Reg. Pin x 2-3/8” Reg Box Drain Sub, 2-3/8” 8-Round Pin x 2-1/16” CS Box, 1” SR Pin x 2-3/8” 8-Round Box Drain Sub, 2-3/8” CS Pin x 2-3/8” 8-Round Box K#: K30051


6-5/8”Reg Pin x 7-5/8” Reg Pin, 4-1/2” FH Pin x 4-1/2” Reg Pin, 4-1/2” Reg. Pin x 4-1/2” Reg Box, 4” H-90 Pin x 4-1/2” XH Box K#: K31020

3 A (12) Crossover Subs & (1) Collar

1-13/16” WFJ Pin x 4”-Thread N-Round Box, 1-1/2” CS Pin x 1-1/2” DSS Box, 1-1/2” 10-Round Pin x 2” LP Box, 2-1/16” CS Pin x 1-1/2” 10-Round Box, 2-3/8” 8-Round Pin x 2-3/8” Box, 1-13/16” WFJ Pin x 1-1/4” Reg Box, 2-1/4” EUE Pin x 2-3/8” 8-Round Box, 1-1/4” EUE 10-Round Collar, 3-1/4” SR x 1” CS (Box x Box), 1 13/16” WFJ x 7/8” SR (Box x Box), 1 13/16” WFJ Pin x 1” Rod, 1” CS Pin x 1” CS Box 1 ¼” 10-Round Pin x 1 13/6” WFJ Box ----SA-20368, 20188, 20362, 21193, 20025, 28451, 20761, 20452 K#: K30129

3 A (4) Crossover Subs + Pump in Sub

7-5/8” Reg Pin x 6-5/8” Reg Box, 4-1/2” IF Pin x 5-1/2” H-90 Box, 4-1/2” XH Pin x 5-1/2” H-90 Box, 6-5/8” Reg Pin x 5-1/2” H-90 Box K#: K30113

3 A (5) Crossover Subs 2-7/8” CS Pin x 2-7/8” 8-Round Box, 2-3/8” CS Pin x 2-7/8” 8-Round Box, 2-3/8” IF Pin x 2-7/8” 8-Round Box, 2-3/8” 8-Round Pin 2-7/8” 8-Round Box, 5” 8-Round Pin x 2-7/8” 8-Round Box K#: K30057


2-3/8” IF Pin x 2-3/8” IF Box Drain Sub, 2-7/8” IF Pin x 2-3/8” IF Box, 2-3/8” 8-Round Pin x 2-3/8” IF Box, 2-7/8” IF Pin x 2-3/8” IF Box, 2-7/8” PH6 Pin x 2-3/8” IF Box K#: K30101


2-3/8” PH6 Pin x 2-3/8” PH6 Box, 2-3/8” PH6 Pin x 2-7/8” Reg Box, 2-7/8” PH6 Pin x 2-7/8” IF Box, 2-3/8” IF Pin x 2-3/8” IF Box, 2-3/8” CS Pin x 2-3/8” 8-Round, 2-3/8” 8-Round Pin x 2-3/8” IF Box K#: K30123


2-3/8” DSS Pin x 2-7/8” DSS Box, 2-3/8” Ph6 Pin x 2-7/8” DSS Box, 2-7/8” Ph6 Pin x 2-7/8” DSS Box, 2-7/8” Ph6 Pin x 2-7/8” VAM Box, 2-3/8” 8-Round Pin x 2-7/8” Ph6 Box, 2-7/8” IF Pin x 2-7/8” CS Box K#: K30070





2-3/8” DSS Pin x 2-3/8” 8-Round Box, 2-3/8” Buttress Pin x 2-3/8” 8-Round Box, 2-3/8” PH6 Pin x 2-3/8” 8-Round Box, 2-3/8” CS Pin x 2-3/8” 8-Round Box, 2-3/8” VAM Pin x 2-3/8” 8-Round Box K#: K30052


2-3/8” 8-Round Pin x 2-3/8” Reg Box, 2-3/8” 8-Round Pin x 2-3/8” Ph6 Box, 2-7/8” IF Pin x 2-3/8” PH 6 Box, 2-3/8” IF Pin x 2-3/8” PH 6 Box, 1-1/2” CS PIN x 2-3/8” PH 6 Box K#: K30039


2-3/8 PH-6 Pin x 2-3/8” Reg Box, 2-3/8” IF Pin x 2-3/8” Reg Box, 2-3/8” IF Pin x 2-3/8” PH 6 Box, 2-3/8” PH-6 x 2-3/8” PH-6 Box, 2-3/8” Reg Pin x 2-3/8” CS Box, K#: K30036


2-7/8” PH6 Pin x 2-7/8” DSS Box, 2-7/8” 8-Round Pin x 2-7/8” PH6 Box, 2-7/8” Ph6 Pin x 2-7/8” DSS Box, 2-3/8” 8-Round Pin x 2-3/8” DSS Box, 2-7/8” 8-Round Pin x 2-7/8” VAM Box, 2-7/8” IF Pin x 2-7/8” CS Box K#: K30073

3 A (5) Crossover Subs 2-3/8” PH6 Pin x 2-3/8” IF Box, 2-7/8” PH6 Pin x 2-3/8” 8-Round Box, 2-3/8” PAC Pin x 2-3/8” Reg Box, 2-3/8” IF Pin x 2-7/8” PAC Box, 2-3/8” Reg. Pin x 2-3/8” PAC Box K#: K30090


4-1/2” XH x 4-1/2” Reg, 2-7/8” IF x 4-1/2” Reg, 4-1/2” XH x 6-5/8” Reg, 4-1/2" H-90 x 4-1/2” Reg, K#: K31027


2-7/8” 8-Round Pin x 2-7/8” Ph6 Box, 2-7/8” DSS Pin x 2-7/8” DSS Box, 2-7/8” 8-Round Pin x 2-7/8” 8-Round Box Drain Sub, 2-3/8” PH6 Pin x 2-7/8” Ph6 Box, 2-7/8” 8-round Pin x 2-7/8” Reg Box, 2-3/8” IF Pin x 2-7/8” DSS Box. K#: K30068


2-3/8” PH6 Pin x 2-7/8” Ph6 Box, 2-7/8” 8-Round Pin x 2-7/8” PH6 Box, 2-3/8” Reg. Pin x 2-7/8” SL Box, 2-7/8” 8-Round Pin x 2-3/8” PH6 Box, 2-3/8” IF Pin x 2-3/8” Ph6 Box, 2-7/8” If Pin x 2-7/8” Reg Box. -SA-20050, 20046, 20344, 20705, 20816, 20573 K#: K30067




3 A (5) Crossover Subs 2-7/8” PH6 x 2-7/8” 8-Round Box, 2-3/8” 8-Round Pin x 2-7/8” 8-Round Box, 2-3/8” Reg Pin x 2-7/8” 8-Round Box, 2-7/8” DSS Pin x 2-7/8” 8-Round Box, 3-1/2” FH Pin x 2-7/8” 8-Round Box, K#: K30053


2-3/8” Reg. Pin x 2-3/8” IF Box, 2-3/8” 8-Round Pin x 2-3/8” IF Box, 2-7/8” 8-Round Pin x 2-3/8” IF Box, 2-3/8” IF Pin x 2-3/8” IF Box, 2-3/8” IF Pin x 2-3/8” IF Box (Screw In Sub) K#: K30091


2-3/8” Reg Pin x 2-3/8” 8-Round Box, 2-3/8” Ph6 Pin x 2-3/8” 8-Round Box, 2-1/16” 10-Round Pin x 2-3/8” 8-Roud Box, 2-3/8” IF Pin x 2-3/8” 8-Round Box, 2-11/16” CS Pin x 2-3/8” 8-Round Box K#: K30047


2-3/8” 8-Round Pin x 2-3/8” Reg Box, 2-3/8” IF Pin x 2-3/8” CS Hyd Box, 2-7/8” 8-Round Pin x 2-3/8” Buttress Box, 2-7/8 CS Pin x 2 7/8” 8-Round Pin K#: K30035


4-1/2” XH Pin x 2-7/8” IF Box, 2-7/8” Reg Pin x 2-3/8” Reg Box, 4-1/2” Fh Pin x 2-7/8” IF Box, 3-1/2” H-90 Pin x 3-1/2” FH Box, 2-7/8” IF Pin x 3-1/2” IF Box K#: K30108


2-3/8” CS Pin x 2-3/8” 8-Round Box, 2-7/8” Reg Pin x 2-3/8” 8-Round Box, 2-3/8” PH6 Pin x 2-3/8” 8-Round Box, 2-3/8” CS Pin x 2-3/8” 8-Round Box, 2-7/8” Ph6 Pin x 2-3/8” 8-Round Box K#: K30050

3 A (5) Swivel Subs

3-1/2” 8-Round, 3-1/2” IF, 2-3/8” 8-Round, 2-3/8” 8-Round, 2-3/8” Ph6, 2-7/8” Ph6 K#: K30081


2-7/8” PAC Pin x 2-3/8” IF Box, 2-7/8” PAC Pin x 2-3/8” PH6 Box, 2-7/8” CS Pin x 2-3/8” IF Box (Screw in Sub), 2-7/8” PH6 Pin x 2-3/8” Reg Box, 2-3/8” PAC Pin x 2-3/8” Reg Box K#: K30102


4-1/2” LTC Pin x 2-7/8” 8-Round Box, 3-1/2” CS Pin x 3-1/2” Buttress Box, 2-7/8” IF Pin x 2-7/8” 8-Round Box, 2-7/8” IF Pin x 3-1/2” 8-Round Box, 3-1/2” IF Pin x 2-7/8” 8-Round Box K#: K30105




3 A (5) Box x Box Crossover Subs 2-7/8” 8-Round x 2-7/8” Reg., (2) 2-3/8” 8-Round x 2-7/8” Reg., 2-3/8” Reg. x 2-7/8” Reg., 2-3/8” PH6 x 2-7/8” Reg. K#: K31046


2-3/8” PAC Pin x 2-3/8” 8-Round Box, 2-3/8” IF Pin x 2-7/8” PAC Box, 1-1/2”PH6 Pin x 2-7/8” PAC Box, 2-7/8” PAC Pin x 2-3/8” PAC Box, 2-3/8” PH6 Pin x 2-7/8” PAC Box K#: K30088


4-1/2" Reg x 5” H-90, 2-7/8” IF x 3-1/2” Reg, 4-1/2” Reg x 7-5/8” WP, 4-1/2" Reg x 8-1/8” WP, 4-1/2” Reg x Blank K#: K31025

3 A (5) Swivel Subs

Pin Sizes: 2-7/8” 8-Round, 2-7/8” IF, 3-1/2” 8-Round, 2-7/8” 8-Round, 2-3/8” 8-Round K#: K30079


2-3/8” 8-Round Pin x 2-3/8” PH6 Box, 2-1/16” HY CS Pin x 2-3/8” PH6 Box, 2-3/8” Ph6 Pin x 2-3/8” Reg Box, 2-7/8” IF Pin x 2-3/8” 8-Round Box, 2-7/8” 8-Round in x 2-3/8” Cs Box, K#: K30041

3 A (4) Crossover Subs (2) 2-3/8” K-Fox Pin x 2-3/8” Box, 2-3/8” NKEL Pin x 2-3/8” DSS Box, 2-3/8” QAUNEX DWF x 2-3/8” 8-Round Box K#: K30085


(2) 2-3/8” PH6 x 2-7/8” Reg., 1-1/4” CS x A-Rod., 2-3/8” PH6 x 2-3/8” Reg., 2-3/8” CS x 2-3/8” Reg. K#: K31037

Items Sell: 2:45 PM-2:50 PM 3 A (4) GR 17440 Basket Grapples

(UNUSED) w/ (1) Control Catch Sizes; 1-5/8”, 1-3/8”, 7/8”, 1-1/16” K#: K31018


(UNUSED) w/ (1) Control Catch Sizes; 3” & (2) 3-1/6” K#: K30936



3 A (3) GR# 9343 Short Catch Basket

Grapples (UNUSED) & (1) Control Catch Sizes; 1.063” NIT, 1-3/8”, 1-1/8” K#: K31085




3 A (2) 2-3/8” GR# 9307 Spiral Grapples (UNUSED) w/ (2) Controls K#: K31016


(UNUSED) Catch Sizes; (1) 3-1/16” & (1) 2-3/8” w/ Control K#: K23682

3 A (2) 3.220 GR# 2489 LCS Basket

Grapples (UNUSED) w/ Controls K#: K23659

3 A (5) Crossover Sub

2-7/8” PH6 Pin x 2-7/8” 8-Round Box, 2-7/8” DSS Pin x 2-7/8” 8-Round Box, 2-7/8” VAM Pin x 2-7/8” 8-Round Box, 2-7/8” REG Pin x 2-7/8” 8-Round Box, 2-7/8” IF Pin x 2-7/8” 8-Round Box K#: K30060


4-1/2” FH Pin x 2-7/8” IF Box, 2-7/8” 8-Round Pin x 3-1/2” Reg Box, 2-7/8” XL Pin x 2-7/8” H-90 Box, 3-1/2” IF Pin x 3-1/2” AB Box, 4-1/2” 8 Round Pin x 2-3/8” IIF Box, K#: K30106

3 A (5) Crossover Subs 4” FH Pin x 4-1/2” XH Box, 4-1/2” H-90 Pin x 4-1/2” XH Box, 2-7/8” IF Pin x 4-1/2” XH Box, 4-1/2” FH Pin x 4-1/2” XH Box, 2-3/8” IF Pin x 4-1/2” XH Box K#: K30116


3-1/2” IF Pin x 4” FH Box (w/Hard Band), 2-7/8” IF Pin x 4-1/2” XH Box, 3-1/2” IF Pin x 4” FH Box, 4-1/2” XH Pin x 4-1/2” FH Box (2 Deg. Bent), 4-1/2” XH Pin x 4-1/2” FH Box K#: K30117


4-1/2” FH Pin x 3-1/2” Reg Box, 4-1/2” IF Pin x 4” H-90 Box, 5” H-90 Pin x 4-1/2” FH Box, 4-1/2” FH Pin x 3-1/2” IF Box, 2-7/8” IF x 3-1/2” FH Box K#: K30110

Items Sell: 2:50 PM-2:55 PM 3 A (2) GR# B2489 Spiral Grapples

(UNUSED) + (1) Control 4-1/8” & 4-1/4” K#: K23665

3 A (3) GR# 27768 Grapples (UNUSED)

w/ (2) Controls Catch Sizes; 1-3/8” NIT Short Catch, 1” NIT, 3/4” Baskets K#: K31080




3 A (3) GR# 9343 Short Catch Basket Grapples (UNUSED) & (1) Control Catch Sizes; (2) 1-1/4”, 1-1/8” K#: K31047


Grapples (UNUSED) Catch Sizes; 1-7/8” RHW, 4-1/2” K#: K31007




(UNUSED) 3-7/8” & 3-3/8” K#: K23664


Grapples (UNUSED) & (1) Control Catch Sizes; 1-3/16”, 1-1/4”, 1-5/16” K#: K31087



3 A (3) GR # B1837 Grapples (UNUSED) w/ (3) Controls Catch Sizes; 2-5/8” Basket & (2) Spirals; 3-1/8” & 3-1/16” K#: K30940




(UNUSED) w/ (1) Control Catch Sizes; (2) 3-1/16” & 3” K#: K30935



Items Sell: 2:55 PM-3:00 PM 3 A (3) GR# 9403 Grapples (UNUSED)

Catch Sizes; 3/4” & 7/8” Baskets & 1-5/8” Short Catch Spiral K#: K31049


(UNUSED) Catch Sizes; 1-3/4”, 1-13/16”, 1-11/16” K#: K31083




3 A (4) GR# 9403 Spiral Short Catch Grapples (UNUSED) Catch Sizes; (2) 1-5/8”, 1-1/2" NIT, 1-5/8” NIT K#: K31050


Grapples (UNUSED)& (2) Controls Catch Sizes; 1-7/16”, 1-1/2”, 1-5/8” K#: K31082


(UNUSED) Catch Sizes; 3-3/8”, 3-1/16”, 3” K#: K30933

3 A (2) GR# B2489 Grapples (UNUSED)

(1) Basket; 2.70 LCS, (1) Spiral; 4” K#: K23662




(UNUSED) w/ (1) Control Catch Sizes; 5”, 5-1/8”, 5-1/4” K#: K30977


Grapples (UNUSED) & (1) Control Catch Sizes; 1-5/16”, 1-3/8”, 1-1/16” K#: K31086

3 A (3) GR# 9403 Basket Grapples (UNUSED) Catch Sizes; 5/8”, 13/16”, 1” K#: K31048

3 A (2) 3-1/16” GR# 1741 Spiral

Grapples (UNUSED) & (1) Stop K#: K31064


(Unused) 4.010”, 3.479” K#: K26013

Items Sell: 3:00 PM-3:05 PM 3 A (2) GR# B2489 Basket Grapples

(UNUSED) 3-1/8” & 2-3/8” K#: K23663


Grapples (UNUSED) w/ (1) Control Catch Sizes; 4” & 5-3/4” K#: K31011


(UNUSED) w/ (1) Control Catch Sizes; 3”, 3-5/8”, 3-1/16” K#: K30934




3 A (2) GR# 2489 LCS Basket Grapples (UNUSED) 3-1/16”, 3-21/32” K#: K23660


(UNUSED) w/ (1) Control Catch Sizes; 3-1/4”, 3-1/16”, 3” K#: K30938


Grapples (UNUSED) Catch Sizes; 5”, 4-1/8” K#: K31010




(UNUSED) w/ (2) Controls Catch Sizes; 1-3/4”, 1-1/2”, 1-11/16” K#: K31019



3 A (2) GR# 1230 Spear Grapples (Unused) Catch Sizes; 3.032” & 2.748” K#: K31091


(UNUSED) w/ (1) Control Catch Sizes; 3.220”, 3-1/16”, 2.900” K#: K30937


(Unused) Catch Sizes: .864”, .987 K#: K26028

Items Sell: 3:05 PM-3:10 PM 3 A (2) GR# 1230 Spear Grapples

(Unused) Catch Sizes-2.717”, 2.516” K#: K26017


(Unused) Catch Sizes- 2.938”, 3.485” K#: K26016


(UNUSED) 3-3/32” w/ Control, 3-3/4” K#: K23661




3 A (3) GR# 18358 Short Catch Grapples (UNUSED) & (2) Controls Catch Sizes; 1/2”, 1”, 7/8” K#: K31078

3 A Qty (2) Drilling Spool Racks

(1) 8' Long, (1) 7' x 6" K#: K27074


Grapples (UNUSED)& (2) Controls Catch Sizes; 1-7/16”, 1-5/8”, 1-1/2” K#: K31081

3 A 5-1/2" FH Box x 7-5/8" Reg Pin

Crossover Sub K#: K30921

3 A QTY (23) 1-7/8” – 7/8” Hammer

Wrenches K#: K26083

3 A (4) Asst. Subs: (1) Pump In & (3)

Drain Subs 2-7/8” IF Pump In Sub, 3-1/2” IF & 2-7/8” IF Drain Subs, & 2-7/8” 8RD Mule Shoe Drain Sub K#: K29110

3 A 7-5/8" Reg Box x 5-1/2" FH Pin


3 A (4) Asst Drain Subs 1-13/16” WFJ Pin x 2-7/8” 8RD Pin, 1-13/16” WFT Pin x 2-3/8” 8RD Pin, 2-3/8” Reg Pin x 2-3/8” IF Box 2-7/8” 8RD Box x Pin K#: K29111

3 A 3-1/2" IF Box x 2-7/8" IF Pin


Items Sell: 3:10 PM-3:15 PM 3 A GR# 4498 4 7/8” Spiral Grapple

(UNUSED) w/ (2) Controls (1) Spiral Control & (2) Stops 4-3/4”, 5” K#: K23666

3 A GR# B3596 2-1/4" Catch Basket

Grapple (UNUSED) w/ (2) Controls & Type A Packers K#: K30941

3 A (2) GR# 78993 Continuous Grapples

w/ Controls 1-1/4” & 1-1/4” Split K#: K31017

3 A GR# 17236 Spear Grapple (Unused)

Catch Size- 5.727 K#: K26006




3 A GR# B11026 LCS Short Catch Grapples (UNUSED) Catch Sizes; (2) 2-19/32 K#: K30994

3 A GR# 9687 Basket Grapple w/ 5"

Catch (UNUSED) & (2) Stops 4-3/8" ID & 4-3/4" ID Stops K#: K30939

3 A 4-9/16” Washdown Cutter Knife

Body (Unused) K#: K29137

3 A (21) GR #37590 Asst Size Mill

Controls K#: K30976

3 A (3) Basket Grapples; (1) 6112 4-1/8"

Catch, (2) 37590 2-3/8" Catch K#: K015429

3 A Bear Crossover Subs

(2) 2-3/8”, Bear Connection x 2-3/8” 8-Round & 2-3/8” Bear Tubing Coupling K#: K30084

3 A 4-9/16” Washdown Cutter Parts

(2) Drive Sleeves Spring Retainer, (6) Races (2 Unused), Ratchet Pawl & (1) Bearing K#: K29136

3 A (4) Wash Pipe Crossover Subs 7” Buttress Pin x 2-7/8” 8RD Box, 3-3/4” COT Pin x 4-1/2” WP Box, 3-3/4” DOT Pin x 5-1/2” WP Box, 3-3/4” COT Pin x 4-3/8” RFJ Box K#: K29116

Items Sell: 3:15 PM-3:20 PM 3 A (9) Asst GR# 6112 Controls + (3)

Stops Stops: 3-3/16”, 2-11/16”, 2-7/16” Controls:(4) 4-1/8”, 3-1/8”, 3-3/32”, 3-7/16”, (2) 2-5/8” K#: K23658

3 A (2) GR #1741 Mill Controls & (8)

Type A Packers K#: K30955

3 A (4) Wash Pipe Crossover Subs

5-3/4” WP Box x 8-1/8” WP Pin, 4-3/8” Hyd WP Pin x 4-1/2” WP Box, 4-1/2” Buttress Pin x 4-1/2” WP Box, 4-1/2” Cutter Guide Pin x 4-1/2” WP K#: K29118


3-1/4” WP Pin x 3-5/16” WP Box, 5-3/4” WP Pin x 5-1/2” WP Box, 7” WP Pin x 7-5/8” WP Box, 9” PFT Pin x 8-1/8”WP Box K#: K29114


4-3/8” Hyd WP Box x 5-1/2” WP Pin, 4-1/2” WP Box x 5-3/4” WP Pin, 5-3/4” WP Box x 6-5/8” WP Pin K#: K29119




3 A (4) Wash Pipe Crossover Subs 4” WP Pin x 3-3/4” COT Box, 4-1/2” WP Pin x 4-3/8” RFJ Box, 5-1/2” WP Pin x 5-3/4” WP Box, 4-1/2” WP Pin x 5-3/4” WP Box K#: K29115


4-1/2” WP Pin x 3-3/4” COT Box, Approx. 4-3/16” Bowen Pin x 4-1/2” WP Box, 3-3/4” COT Pin x 3-7/8” Cutter Pin, 4” WP Pin x 3-3/4” Cot Box, 5-1/2” WP Pin x 5-1/2” WP Box, 5-1/2” x Uncut K#: K29117

3 A 4'H x 4'W x 2'Deep Steel Tool Rack

Including Raw Steel Material Contents Incl K#: K29158

3 A QTY (11) Shop Built Washpipe Test

Plates 3-1/16”, 3-3/4” COT, 4-3/8” RFJ, 4-1/2” WP, 5” WP, 5-1/2” WP, 7” WP, 7-5/8” WP, & 8-1/8” WP K#: K27650

3 A (6) Test Sleeves

4-1/2” 11.6#, 5-1/2” 17#, 5-1/2” 23#, 4” 11.30#, 4-1/2” 13.5#, 4-1/2” 10.5# K#: K29233

3 A (4) 2-3/8” 8-Round Pump In Subs w/

1502 WECO Unit K#: K29237

3 A (4) Wash Pipe Crossover Subs 4-3/8” RFJ Pin x 4-1/2” WP Box, 7” WP Pin x 5-3/4” WP Box, 8-1/8” WP Pin x 7-5/8” WP Box, 7-5/8” WP Pin x 8-1/8” WP Box K#: K29113

Items Sell: 3:20 PM-3:25 PM 3 A 250 Gallon Poly Tote W/ Metal

Bump Frame K#: K27076

3 A Qty (3) Metal Shop Tables

48"x33"x31'H W/vise, 24"x24"x30"H, 28"x28"x16"H K#: K23826

3 A (4) 2-7/8” Pump In Sub w/ 1502

WECO Unit K#: K29234

3 A (3) 2-3/8” 8-Round Pump In Sub w/


3 A (3) 2-3/8” 8-Round Pump In Subs w/


3 A Lifting Bales 2-7/8" IF & Reg, 2-3/8"

Reg, 4-1/2" Reg, 3-1/2"IF K#: K015412




3 A 2-3/8" 8Rd Knock Out Sub w/ Rod K#: K29240

3 A 0-12 x .0001 Outside & Inside

Micrometer Set ( Most UNUSED) K#: K27093

3 A (3) 2-3/8" Pump In Subs w/ 1502

WECO Unit K#: K29235

3 A (3) Bleeder Subs

2-3/8” PH6, 2-7/8” PH6, 2-7/8” 8-Round K#: K29241

3 A Lot Of Misc. Swedges, Unions

&Fittings K#: K30150

3 A (2) 3-1/2” 8-Round Pump In Sub w/


Items Sell: 3:25 PM-3:30 PM 3 A Assortment of Gauge Rings

Sizes Range From 3-1/4” ID to 17-7/8” ID K#: K29167

3 A (6) Safety Cables

K#: K27082

3 A Various Type Hoses & Wire Rope

(1) High Press Hyd. Hose, (2) Fluid Hoses, 5/8” Dia. Wire Rope K#: K29191


2-7/8” IF x 4-1/2” Reg, 4-1/2” Reg. x 5” H-90, 4-1/2” IF x 4-1/2” Reg, 3-1/2” CS x 3-1/2” Reg, 3-1/2” Reg. x 4” H-90. K#: K31028

3 A Fishing & Handling Tool Misc Parts

Casing Scraper Blades, Air Slip Inserts, Drill Collar Slip Inserts, Safety Hooks, Clevis, Hyd Unions K#: K015411


SEPTEMBER 16-17, 2021 K-NUMBER CROSS REFERENCE

CLOSING TIME (CENTRAL) OR LOT NUMBER K-# LOT IP ID# K-# LOT IP ID# K-# LOT IP ID# K-# LOT IP ID#


10:35 AM 5517551

K22109 1240 5474016

K28990 10:30 AM 5485086

K28991 10:30 AM 5485088

K29000 1546 5485040

K32351 1829 5485484

K32362 9:15 AM 5485472

K32397 1787 5485480

K32398 1815 5485473

017936* 1200 5443237

K00RBA1 1213 5459703

K00RBA2 1212 5459709

K00RBA3 1211 5459720

K015010* 1148 5404102

K015011* 1153 5404107

K015029* 1150 5404117

K015030* 1149 5404140

K015031* 11:55 AM 5380189

K015040* 12:05 PM 5444372

K015041 1202 5394434

K015042 1203 5394442

K015043 11:45 AM 5394473

K015044 11:45 AM 5394474

K015045 11:45 AM 5394475

K015048 9:50 AM 5394519

K015049 9:50 AM 5394548

K015050 12:00 PM 5394577

K015409 557 5436572

K015410 995 5436575

K015411 3:30 PM 5438985

K015412 3:25 PM 5436579

K015413 993 5436580

K015414 992 5436582

K015415 4 5436440

K015416 1 5436458

K015417 2 5436462

K015418 3 5436471

K015419 172 5436492

K015420 171 5436496

K015421 178 5436501

K015422 177 5436502

K015423 175 5436504

K015424 174 5436509

K015425 176 5436511

K015426 170 5436517

K015427 10:50 AM 5436522

K015428 1057 5436525

K015429 3:15 PM 5436528

K015430 362 5436529

K015431 363 5436533

K015432 9:05 AM 5436537

K015433 924 5436551

K015434 9:55 AM 5436562

K015435 571 5494248

K015436 1840 5494246

K015437 1841 5494249

K015438 1808 5494252

K015439 1811 5494254

K015440 1809 5494258

K015441 1813 5494259

K015442 1812 5494267

K015443 1047 5494272

K015444 32 5494302

K015445 26 5494337

K015446 25 5494351

K015447 36 5494363

K015448 37 5494375

K015449 35 5494378

K015450 33 5494379

K017006* 1167 5403388

K017007* 1166 5403392

K017008* 1180 5403477

K017009* 1181 5403975

K017011* 1182 5404051

K017037 1159 5372061

K017038 1160 5403390

K017041* 1187 5404062

K017042* 1186 5404066

K017043* 1188 5404067

K017044* 1165 5404076

K017046* 1174 5404082

K017050* 12:05 PM 5380302

K018362* 1189 5404091

K018363* 1146 5404097

K018364* 12:05 PM 5380319

K018385 1197 5286733

K018386 1196 5286735

K018401 9:30 AM 5443806

K018402 1252 5477015

K018403 1508 5477016

K018406 11:55 AM 5443820

K018407 1168 5443834

K018408 1172 5443680

K018409 1173 5443683

K018410 1130 5443690

K018411 1142 5477026

K018412 1135 5477067

K018413 1141 5477069

K018414 1137 5477081

K018415 1138 5477107

K018416 1179 5477023

K018417 1139 5477109

K018418 1143 5477114

K018419 1136 5477163

K018420 1140 5477168

K018421 1144 5477170

K018422 1145 5477173

K018423 1222 5488644

K018424 1249 5488651

K018425 1248 5488653

K018426 1226 5488655

K018427 1215 5488657

K018428 1218 5488681

K018429 1217 5488647

K018430 1214 5488688

K018431 1223 5488702

K018432 1216 5488708

K018433 1251 5488723

K018434 1250 5488728

K018435 1225 5488738

K018436 1221 5488780

K018437 1219 5488790

K018438 1224 5488798

K018439 1220 5488705

K018440 1923 5494075

K018441 1924 5494077

K018451 12:00 PM 5394487

K018452 12:00 PM 5394488





K018453 12:00 PM 5394489

K018454 12:00 PM 5394490

K018455 12:00 PM 5394491

K018456 1193 5394447

K018457 1192 5394451

K018458 9:15 AM 5394454

K018459 1190 5394461

K018460 1191 5394464

K018461 1185 5394585

K018462 1911 5394602

K018463 1152 5394609

K018464 1913 5394617

K018465 1912 5394619

K018466 1201 5398084

K018467 1210 5398098

K018468 1131 5398106

K018469 1132 5398108

K018470 1206 5398133

K018471 1205 5398164

K018472 1204 5398178

K018473 1151 5398205

K018474 1147 5398112

K018479 1176 5415834

K018480 1198 5415881

K018481 1154 5415840

K018482 1156 5415845

K018483 1155 5415849

K018484 1157 5415860

K018485 1158 5415880

K018486 1199 5443647

K018487 9:40 AM 5443673

K018488 9:20 AM 5443674

K018489 11:40 AM 5443671

K018490* 9:15 AM 5447651

K018491 9:10 AM 5443785

K018493 9:05 AM 5443798

K018494 9:25 AM 5443799

K018495 9:15 AM 5443800

K018496 9:20 AM 5443801

K018497 9:30 AM 5443802

K018498 9:05 AM 5443803

K018499 9:25 AM 5443804

K018500 9:20 AM 5443805

K08492 9:10 AM 5443797

K22106 1209 5447632

K22107 1207 5447949

K22108 1208 5447950

K22110 1245 5474017

K22111 1239 5474018

K22112 1247 5474019

K22113 1238 5474021

K22114 1241 5474022

K22115 1242 5474023

K22116 1244 5474024

K22117 1246 5474025

K22118 1243 5474026

K22119 1547 5476469

K22120 1175 5476405

K22121 1910 5476403

K22122 1169 5476402

K22123 1493 5476400

K22124 9:10 AM 5466161

K22125 1500 5466157

K22126 10:30 AM 5467374

K22127 1568 5467332

K22128 1569 5467333

K22129 1567 5467310

K22130 1566 5467284

K22131 1565 5467282

K22132 1563 5467267

K22133 1564 5467249

K22134 1550 5467240

K22135 1549 5467187

K22136 1548 5467165

K22137 1551 5467024

K22138 1554 5466736

K22139 1557 5466738

K22140 1556 5466740

K22141 1555 5466741

K22142 1562 5466727

K22143 1561 5466720

K22144 1558 5466635

K22145 1559 5466613

K22146 1560 5466191

K22147 1552 5466187

K22148 1553 5466184

K22149 9:55 AM 5466136

K22150 9:05 AM 5466099

K22351* 12:10 PM 5412145

K22352* 12:15 PM 5412147

K22353* 12:10 PM 5412157

K22354* 12:10 PM 5412158

K22355* 12:10 PM 5412174

K22356* 12:10 PM 5412191

K22358* 12:10 PM 5412194

K22359* 12:10 PM 5412195

K22360* 12:10 PM 5412196

K22361* 12:10 PM 5412200

K22362* 1:55 PM 5412207

K22363* 12:10 PM 5412210

K22364* 12:10 PM 5412214

K22365* 1019 5412221

K22366* 1020 5412233

K22751 722 5374915

K22752 715 5374916

K22753 723 5374917

K22754 745 5377305

K22755 738 5377308

K22756 731 5377311

K22757 740 5377531

K22758 741 5377533

K22759 754 5377536

K22760 734 5377539

K22761 746 5377541

K22762 751 5377542

K22763 727 5377544

K22764 729 5377547

K22765 737 5377549

K22766 739 5377551

K22767 752 5377553

K22768 736 5377554

K22769 728 5377555

K22770 742 5377557

K22771 726 5377558

K22772 733 5377297

K22773 732 5377301

K22774 747 5377303

K22775 365 5377560





K22776 364 5377561

K22777 366 5377562

K22778 367 5377563

K22779 368 5377564

K22780 369 5377605

K22781 370 5377606

K22782 372 5377607

K22783 371 5377608

K22784 373 5377609

K22785 374 5377610

K22786 730 5377559

K22787 772 5377611

K22788 767 5377613

K22789 770 5377614

K22790 768 5377615

K22791 773 5377616

K22792 771 5377617

K22793 769 5377618

K22794 781 5377619

K22795 780 5377620

K22796 777 5377621

K22797 779 5377622

K22798 778 5377623

K22799 776 5377624

K22800 775 5377625

K23639 1487 5424000

K23640 1491 5424001

K23641 1488 5424002

K23642 1497 5424003

K23643 1494 5424004

K23644 1489 5424005

K23645 1509 5424006

K23646 1510 5424007

K23647 1495 5424008

K23648 1505 5424009

K23649 1511 5424010

K23650 1498 5424011

K23651 12:20 PM 5358597

K23652 1:00 PM 5358599

K23653 1:05 PM 5358591

K23654 1:20 PM 5358593

K23655 415 5358595

K23656 12:35 PM 5358602

K23657 1:40 PM 5358612

K23658 3:20 PM 5358665

K23659 2:50 PM 5358666

K23660 3:05 PM 5358667

K23661 3:10 PM 5358668

K23662 3:00 PM 5358669

K23663 3:05 PM 5358670

K23664 2:55 PM 5358671

K23665 2:55 PM 5358672

K23666 3:15 PM 5358673

K23667 451 5358674

K23668 1:15 PM 5359017

K23669 12:50 PM 5359018

K23670 12:30 PM 5359019

K23671 12:40 PM 5359020

K23672 12:45 PM 5359021

K23673 12:50 PM 5359022

K23674 12:40 PM 5359023

K23675 1:00 PM 5359024

K23676 12:15 PM 5359025

K23677 12:55 PM 5359026

K23678 12:25 PM 5359027

K23679 12:15 PM 5359028

K23680 12:25 PM 5359029

K23681 12:40 PM 5359030

K23682 2:50 PM 5359031

K23683 12:45 PM 5359032

K23684 12:15 PM 5359033

K23685 12:30 PM 5359034

K23686 12:50 PM 5359035

K23687 1:10 PM 5359036

K23688 1:00 PM 5359037

K23689 1:00 PM 5359038

K23690 12:25 PM 5359039

K23691 12:30 PM 5359040

K23692 12:15 PM 5359041

K23693 12:15 PM 5359042

K23694 12:30 PM 5359043

K23695 12:45 PM 5359044

K23696 1:00 PM 5359045

K23697 12:15 PM 5359046

K23698 1:05 PM 5359047

K23699 12:55 PM 5359048

K23700 12:25 PM 5359049

K23701 12:20 PM 5359050

K23702 1:05 PM 5359051

K23703 12:30 PM 5359052

K23704 12:40 PM 5359053

K23705 12:20 PM 5359054

K23706 12:55 PM 5359055

K23707 1:10 PM 5359056

K23708 12:45 PM 5359057

K23709 12:20 PM 5359058

K23710 12:55 PM 5359059

K23711 12:25 PM 5359060

K23712 12:50 PM 5359061

K23713 12:50 PM 5359062

K23714 1:15 PM 5359063

K23715 12:20 PM 5359064

K23716 12:15 PM 5359065

K23717 12:35 PM 5359066

K23718 1:30 PM 5359067

K23719 1:30 PM 5359068

K23720 1:55 PM 5359069

K23721 1:25 PM 5359070

K23722 1:30 PM 5359071

K23723 1:25 PM 5359072

K23724 12:35 PM 5359073

K23725 12:50 PM 5359074

K23726 12:20 PM 5359075

K23727 270 5359093

K23728 271 5359094

K23729 297 5359095

K23730 300 5359096

K23731 294 5359097

K23732 296 5359098

K23733 295 5359099

K23734 298 5359100

K23735 299 5359101

K23736 264 5359102

K23737 261 5359103

K23738 266 5359104

K23739 265 5359105

K23740 263 5359106

K23741 268 5359107





K23742 262 5359108

K23743 269 5359109

K23744 267 5359110

K23745 285 5359111

K23746 288 5359112

K23747 287 5359113

K23748 286 5359114

K23749 301 5359115

K23750 302 5359116

K23817 150 5406686

K23818 149 5406685

K23819 151 5406687

K23820 166 5406689

K23821 168 5406690

K23822 977 5406696

K23823 986 5406697

K23824 1015 5406699

K23825 1021 5406700

K23826 3:25 PM 5406702

K23827 1036 5406706

K23828 21 5406707

K23829 152 5406709

K23830 165 5406711

K23831 162 5406714

K23832 167 5406716

K23833 169 5406720

K23834 334 5406721

K23835 335 5406724

K23836 988 5406734

K23837 989 5406736

K23838 990 5406737

K23839 1040 5406739

K23840 836 5406745

K23841 1013 5406756

K23842 1012 5411754

K23843 838 5406758

K23844 952 5406762

K23845 1849 5406767

K23846 10:30 AM 5406768

K23847 10:30 AM 5406771

K23848 10:30 AM 5406773

K23849 70 5406774

K23850 128 5406776

K24101 828 5340765

K24102 829 5340766

K24103 830 5340767

K24104 826 5340768

K24105 825 5340771

K24106 824 5340772

K24107 832 5340774

K24108 831 5340775

K24109 827 5340780

K24110 839 5340781

K24111 842 5340782

K24112 841 5340783

K24113 847 5340784

K24114 840 5340785

K24115 848 5340786

K24116 844 5340788

K24117 843 5340791

K24118 846 5340792

K24119 845 5340793

K24120 859 5340794

K24121 861 5340796

K24122 862 5340797

K24123 858 5340798

K24124 860 5340800

K24125 857 5340801

K24126 870 5340802

K24127 869 5340803

K24128 868 5340922

K24129 878 5340923

K24130 879 5340926

K24131 880 5340927

K24132 881 5340928

K24133 877 5340930

K24134 893 5340933

K24135 887 5340934

K24136 890 5340964

K24137 892 5340969

K24138 888 5340971

K24139 894 5340973

K24140 891 5340975

K24141 889 5340976

K24142 898 5340977

K24143 897 5340991

K24144 901 5341009

K24145 911 5341030

K24146 905 5341057

K24147 917 5341063

K24148 916 5341064

K24149 903 5341066

K24150 918 5342318

K24151 904 5342319

K24152 913 5342320

K24153 915 5342322

K24154 907 5342323

K24155 908 5342324

K24156 912 5342325

K24157 906 5342326

K24158 914 5342327

K24159 910 5342328

K24160 919 5342329

K24161 909 5342330

K24162 934 5342331

K24163 933 5342332

K24164 935 5342333

K24165 936 5342335

K24166 940 5342336

K24167 946 5342337

K24168 951 5342338

K24169 950 5342339

K24170 947 5342340

K24171 949 5342341

K24172 943 5342342

K24173 945 5342343

K24174 944 5342344

K24175 948 5342345

K24176 900 5342346

K24177 834 5342347

K24178 835 5342348

K24179 851 5342349

K24180 849 5342350

K24181 852 5342351

K24182 850 5342352

K24183 856 5342353

K24184 854 5342354

K24185 864 5342355





K24186 865 5342356

K24187 863 5342357

K24188 867 5342358

K24189 872 5342359

K24190 871 5342360

K24191 874 5342361

K24192 873 5342362

K24193 884 5342363

K24194 882 5342364

K24195 883 5342365

K24196 885 5342366

K24197 896 5342367

K24198 895 5342368

K24199 899 5342369

K24200 925 5342370

K24251 927 5342371

K24252 926 5342372

K24253 921 5342373

K24254 923 5342374

K24255 928 5342375

K24256 922 5342376

K24257 929 5342377

K24258 920 5342378

K24259 938 5342379

K24260 937 5342380

K24261 954 5342381

K24262 953 5342382

K24263 958 5342383

K24264 957 5342384

K24265 956 5342385

K24266 996 5342386

K24267 955 5342387

K24268 941 5342388

K24269 22 5342409

K24270 95 5342410

K24271 248 5342411

K24272 964 5342412

K24273 971 5342415

K24274 970 5342416

K24275 967 5342417

K24276 963 5342418

K24277 966 5342419

K24278 969 5342420

K24279 965 5342421

K24280 968 5342422

K24281 326 5344790

K24282 327 5344792

K24283 328 5344793

K24284 329 5344795

K24285 337 5344798

K24286 336 5344806

K24287 333 5344810

K24288 332 5344811

K24289 331 5344820

K24290 330 5344827

K24291 338 5344826

K24292 339 5344828

K24293 340 5344832

K24294 342 5344833

K24295 341 5344860

K24296 343 5344864

K24297 344 5344874

K24298 1863 5349082

K24299 1:20 PM 5349084

K24300 1854 5349086

K24301 1856 5349087

K24302 1851 5349088

K24303 1850 5349089

K24304 1862 5349094

K24305 1865 5349095

K24306 1859 5349096

K24307 1858 5349097

K24308 1861 5349098

K24309 1852 5349099

K24310 1855 5349100

K24311 1864 5349101

K24312 1857 5349102

K24313 1853 5349103

K24314 1860 5349104

K24315 561 5349106

K24316 563 5349107

K24317 562 5349108

K24318 564 5349112

K24319 568 5349125

K24320 567 5349126

K24321 566 5349147

K24322 565 5349148

K24323 569 5349149

K24324 570 5349645

K24325 572 5349646

K24326 573 5349647

K24327 574 5349648

K24328 576 5349649

K24329 575 5349650

K24330 577 5349651

K24331 578 5349652

K24333 797 5349654

K24334 798 5349655

K24335 799 5349656

K24336 800 5349657

K24337 802 5349658

K24338 801 5349659

K24339 554 5349660

K24340 555 5349661

K24341 1029 5349662

K24342 345 5349663

K24343 1010 5349664

K24344 45 5353181

K24345 46 5353183

K24346 47 5353184

K24347 48 5353185

K24348 49 5353186

K24349 135 5354529

K24351 410 5358678

K24352 12:05 PM 5358586

K24353 411 5358679

K24354 412 5358680

K24355 1:15 PM 5358590

K24356 12:20 PM 5358587

K24357 1:15 PM 5358592

K24358 12:25 PM 5358594

K24359 416 5358681

K24360 417 5358682

K24361 414 5358683

K24362 419 5358684

K24363 418 5358685

K24364 420 5358686

K24365 421 5358687





K24366 1:05 PM 5358601

K24367 12:15 PM 5358606

K24368 1:05 PM 5358604

K24369 12:55 PM 5358596

K24370 12:30 PM 5358598

K24371 422 5358688

K24372 12:30 PM 5358609

K24373 12:40 PM 5358611

K24374 424 5358689

K24375 425 5358690

K24376 427 5358691

K24377 426 5358692

K24378 429 5358693

K24379 430 5358694

K24380 433 5358695

K24381 431 5358696

K24382 432 5358697

K24383 434 5358698

K24384 437 5358699

K24385 435 5358700

K24386 436 5358701

K24387 448 5358703

K24388 447 5358704

K24389 443 5358706

K24390 442 5358707

K24391 441 5358708

K24392 444 5358709

K24394 446 5359013

K24395 445 5359014

K24396 12:55 PM 5358615

K24397 12:05 PM 5358617

K24398 12:05 PM 5358619

K24399 12:30 PM 5358638

K24400 12:45 PM 5358620

K24401 1:05 PM 5358622

K24402 1:10 PM 5358624

K24403 1:10 PM 5358626

K24404 1:05 PM 5358630

K24405 1:00 PM 5358637

K24406 1:05 PM 5358631

K24407 1:05 PM 5358632

K24408 12:55 PM 5358634

K24409 1:00 PM 5358643

K24410 12:50 PM 5358641

K24411 12:40 PM 5358658

K24412 1:10 PM 5358646

K24413 12:40 PM 5358648

K24414 12:20 PM 5358650

K24415 12:30 PM 5358662

K24416 1:05 PM 5358659

K24417 12:15 PM 5358663

K24418 12:55 PM 5358664

K24419 449 5358702

K24420 450 5358705

K24421 12:35 PM 5359015

K24422 1:15 PM 5358589

K24423 12:20 PM 5358588

K24424 12:30 PM 5358607

K24425 1:00 PM 5358608

K24426 1:10 PM 5358610

K24427 12:35 PM 5358603

K24428 12:50 PM 5358605

K24429 12:05 PM 5358613

K24430 12:10 PM 5358616

K24431 12:05 PM 5358618

K24432 12:55 PM 5358621

K24433 12:40 PM 5358623

K24434 1:15 PM 5358625

K24435 12:45 PM 5358627

K24436 12:35 PM 5358628

K24437 1:05 PM 5358633

K24438 1:10 PM 5358635

K24439 12:50 PM 5358636

K24440 12:55 PM 5358639

K24441 12:35 PM 5358640

K24442 12:15 PM 5359016

K24443 1:10 PM 5358642

K24444 1:15 PM 5358644

K24445 1:10 PM 5358645

K24446 12:40 PM 5358647

K24447 12:55 PM 5358649

K24448 1:10 PM 5358652

K24449 12:30 PM 5358660

K24450 12:25 PM 5358661

K24551 10:35 AM 5328320

K24552 10:45 AM 5329171

K24553 10:40 AM 5329172

K24554 10:40 AM 5329173

K24555 10:35 AM 5329174

K24557 10:40 AM 5329176

K24559 40 5329179

K24560 41 5329180

K24561 43 5329181

K24562 42 5329182

K24563 44 5329183

K24564 74 5329184

K24565 82 5329185

K24566 75 5329186

K24567 93 5329187

K24568 92 5329188

K24569 89 5329189

K24570 80 5329190

K24571 84 5329191

K24572 91 5329192

K24573 87 5329193

K24574 83 5329707

K24575 86 5329708

K24576 78 5329709

K24577 79 5329710

K24578 77 5329711

K24579 90 5329712

K24580 73 5329713

K24581 94 5329714

K24582 76 5329715

K24583 81 5329716

K24584 98 5329717

K24585 99 5329718

K24586 97 5329719

K24587 100 5329720

K24588 110 5329721

K24589 111 5329722

K24590 107 5329723

K24591 112 5329724

K24592 105 5329725

K24593 106 5329726

K24594 101 5329727

K24595 113 5329728

K24596 104 5329729





K24597 102 5329730

K24598 115 5329731

K24599 114 5329732

K24600 103 5329733

K24601 109 5329734

K24602 108 5329735

K24603 1506 5329736

K24604 189 5329737

K24605 185 5329738

K24606 188 5329739

K24607 191 5329740

K24608 186 5329741

K24609 192 5329742

K24611 183 5329744

K24612 190 5329748

K24613 193 5329749

K24614 194 5329751

K24615 195 5329753

K24616 184 5329754

K24617 187 5329755

K24618 180 5329759

K24619 179 5332682

K24620 182 5332683

K24621 181 5332684

K24622 240 5332685

K24623 241 5332687

K24624 243 5332688

K24625 242 5332689

K24626 244 5332691

K24627 245 5332692

K24628 246 5332824

K24629 247 5332825

K24630 221 5332828

K24631 223 5332829

K24632 200 5342390

K24632 222 5332832

K24633 229 5332840

K24634 228 5332841

K24635 134 5342393

K24635 226 5332843

K24636 225 5332844

K24637 227 5332848

K24638 230 5332849

K24639 236 5332855

K24640 231 5332857

K24641 235 5332865

K24642 237 5332874

K24643 239 5332875

K24644 233 5332877

K24645 224 5332878

K24647 232 5332881

K24648 234 5332882

K24649 197 5332884

K24650 198 5332885

K24651 205 5332955

K24652 207 5332958

K24653 204 5332959

K24654 213 5332963

K24655 209 5332988

K24656 203 5332989

K24657 212 5332990

K24658 215 5332993

K24659 210 5332994

K24660 211 5332995

K24661 216 5332996

K24662 206 5333000

K24663 208 5333001

K24664 214 5333002

K24665 220 5333003

K24666 819 5333004

K24667 817 5333005

K24668 1754 5333747

K24669 1724 5333748

K24670 1726 5333749

K24671 1728 5333750

K24672 1744 5333752

K24673 1751 5333753

K24674 1752 5333754

K24675 1753 5333755

K24676 1730 5333757

K24677 1729 5333758

K24678 1727 5337399

K24679 1747 5337401

K24680 1725 5337406

K24681 1755 5337407

K24682 1722 5337408

K24683 1742 5337411

K24684 1756 5337412

K24685 1748 5337413

K24686 1741 5337422

K24687 1757 5337423

K24688 1723 5337425

K24689 1743 5337426

K24690 1750 5337427

K24691 1749 5337428

K24692 1740 5337429

K24693 1731 5337431

K24694 1736 5337432

K24695 1746 5337434

K24696 1734 5337437

K24697 1732 5337440

K24698 1738 5337457

K24699 1733 5337459

K24700 1745 5337463

K24851 11:40 AM 5409037

K24852 11:35 AM 5409038

K24853 11:30 AM 5409039

K24854 11:40 AM 5409040

K24855 11:25 AM 5409041

K24856 11:35 AM 5409042

K24857 11:25 AM 5409043

K24858 11:30 AM 5409044

K24859 11:20 AM 5409045

K24860 11:40 AM 5409046

K24861 11:35 AM 5409047

K24862 11:35 AM 5409048

K24863 11:40 AM 5409051

K24864 11:30 AM 5409052

K24865 11:35 AM 5409053

K24866 11:35 AM 5409054

K24867 11:25 AM 5409055

K24868 11:30 AM 5409127

K24869 11:20 AM 5409128

K24870 11:40 AM 5409129

K24871 11:25 AM 5409132

K24872 11:20 AM 5409133

K24873 11:30 AM 5409134

K24874 11:30 AM 5409135





K24875 11:35 AM 5409137

K24876 11:35 AM 5409138

K24877 11:40 AM 5409139

K24878 11:30 AM 5409140

K24879 11:25 AM 5409141

K24880 11:25 AM 5409142

K24881 11:30 AM 5409144

K24882 11:40 AM 5409146

K24883 11:30 AM 5409147

K24884 11:35 AM 5409151

K24885 11:20 AM 5409152

K24886 11:30 AM 5409153

K24887 11:25 AM 5409154

K24888 11:25 AM 5409157

K24889 11:25 AM 5409158

K24890 11:35 AM 5409160

K24891 11:40 AM 5409161

K24892 11:35 AM 5409162

K24893 11:35 AM 5409163

K24894 11:40 AM 5409164

K24895 11:30 AM 5409165

K24896 11:30 AM 5409166

K24897 11:40 AM 5409167

K24898 11:25 AM 5409168

K24899 11:25 AM 5409169

K24900 11:25 AM 5409170

K24901 1127 5409189

K24902 1128 5409207

K24903 1126 5409208

K24904 1125 5409209

K24905 1113 5412101

K24906 1124 5412102

K24907 1117 5412104

K24908 1120 5412106

K24909 1114 5412108

K24910 1111 5412109

K24911 1112 5412110

K24912 1118 5412114

K24913 1116 5412115

K24914 1119 5412116

K24915 1123 5412118

K24916 1109 5412119

K24917 1110 5412122

K24919 1121 5412128

K24920 1115 5412129

K24921 1100 5412132

K24922 1122 5412134

K24923 11:55 AM 5412135

K24924 1184 5412137

K24925 1195 5412139

K24926 1492 5439855

K24927 1504 5439856

K24928 10:30 AM 5439857

K24929 1338 5438138

K24930 1339 5438142

K24931 1340 5438143

K24932 1345 5438144

K24933 1342 5438145

K24934 1343 5438150

K24935 1344 5438154

K24936 1349 5438168

K24937 1346 5438169

K24938 1347 5438171

K24939 1351 5438176

K24940 1348 5438180

K24941 1353 5438181

K24942 1352 5438183

K24943 1341 5438185

K24944 1350 5438186

K24945 1354 5446217

K25332 579 5349653

K25610 196 5329743

K25646 238 5332879

K25701* 1909 5403513

K25702* 1906 5403522

K25704* 1907 5403568

K25705* 1903 5403570

K25706* 11:20 AM 5403592

K25707* 11:20 AM 5403597

K25708* 11:20 AM 5403655

K25709* 1908 5403572

K25710* 1183 5403577

K25711* 1904 5403725

K25712* 1171 5403902

K25713* 1905 5403957

K25751 655 5374831

K25752 638 5374832

K25753 651 5374833

K25754 665 5374834

K25755 644 5374835

K25756 653 5374836

K25757 647 5374837

K25758 652 5374838

K25759 654 5374839

K25760 663 5374840

K25761 664 5374841

K25762 660 5374847

K25763 648 5374849

K25764 659 5374850

K25765 650 5374851

K25766 694 5374852

K25767 692 5374853

K25768 689 5374854

K25769 691 5374857

K25770 693 5374858

K25771 697 5374875

K25772 640 5374842

K25773 690 5374876

K25774 704 5374878

K25775 696 5374879

K25776 700 5374881

K25777 702 5374888

K25778 701 5374893

K25779 688 5374856

K25780 703 5374896

K25781 698 5374898

K25782 699 5374900

K25783 695 5374902

K25784 716 5374906

K25785 718 5374907

K25786 725 5374909

K25787 717 5374910

K25788 724 5374911

K25789 721 5374912

K25790 713 5374913

K25791 714 5374914

K25792 750 5377273

K25793 755 5377279





K25794 753 5377282

K25795 735 5377283

K25796 719 5377286

K25797 749 5377288

K25798 743 5377290

K25799 748 5377292

K25800 744 5377294

K25826 603 5374785

K25827 607 5374786

K25828 602 5374787

K25829 609 5374788

K25830 608 5374789

K25831 618 5374790

K25832 619 5374791

K25833 626 5374792

K25834 614 5374793

K25835 621 5374794

K25836 617 5374795

K25837 624 5374796

K25838 616 5374797

K25839 625 5374798

K25840 632 5374799

K25841 637 5374800

K25842 636 5374801

K25843 643 5374823

K25844 645 5374824

K25845 657 5374825

K25846 656 5374826

K25847 661 5374827

K25848 639 5374828

K25849 642 5374829

K25850 641 5374830

K26001 402 5378632

K26002 12:25 PM 5378633

K26003 12:35 PM 5378634

K26004 12:45 PM 5378635

K26005 12:25 PM 5378636

K26006 3:15 PM 5378637

K26007 1:55 PM 5378638

K26008 12:05 PM 5378639

K26009 1:40 PM 5378640

K26010 1:15 PM 5378641

K26011 1:45 PM 5378642

K26012 1:55 PM 5378643

K26013 3:00 PM 5378644

K26014 12:35 PM 5378645

K26015 2:50 PM 5378646

K26016 3:10 PM 5378647

K26017 3:10 PM 5378648

K26018 1:45 PM 5378649

K26019 1:55 PM 5378650

K26020 1:45 PM 5378651

K26021 1:40 PM 5378652

K26022 1:35 PM 5378653

K26023 1:50 PM 5378654

K26024 1:50 PM 5378655

K26025 1:45 PM 5378656

K26026 1:55 PM 5378657

K26027 2:55 PM 5378658

K26028 3:05 PM 5378659

K26029 1018 5378888

K26030 351 5378889

K26031 352 5378890

K26032 353 5378891

K26033 354 5378892

K26034 355 5378893

K26035 356 5378894

K26036 357 5378895

K26037 1016 5378896

K26038 312 5378606

K26039 314 5378607

K26040 313 5378608

K26041 316 5378609

K26042 315 5378610

K26043 317 5378611

K26044 303 5378612

K26045 304 5378613

K26046 306 5378614

K26047 305 5378615

K26048 308 5378616

K26049 307 5378617

K26050 310 5378619

K26051 309 5378620

K26052 311 5378621

K26053 320 5378622

K26054 319 5378623

K26057 10:20 AM 5355290

K26058 10:25 AM 5355294

K26059 10:20 AM 5355295

K26060 10:20 AM 5355300

K26061 10:20 AM 5355301

K26062 10:25 AM 5355302

K26063 10:20 AM 5355303

K26064 10:25 AM 5355306

K26065 10:20 AM 5355310

K26066 10:20 AM 5355311

K26067 10:20 AM 5355312

K26068 10:20 AM 5355316

K26069 10:20 AM 5355317

K26070 10:25 AM 5355318

K26071 10:20 AM 5355319

K26072 10:25 AM 5355320

K26073 10:20 AM 5355321

K26074 10:25 AM 5355322

K26075 10:25 AM 5355325

K26076 10:25 AM 5355343

K26077 10:25 AM 5355344

K26078 131 5355347

K26079 1017 5355348

K26080 1545 5355368

K26081 1543 5355369

K26082 1544 5355370

K26083 3:10 PM 5355371

K26084 1052 5355372

K26085 10:10 AM 5358729

K26086 10:15 AM 5358730

K26087 10:10 AM 5358731

K26088 10:15 AM 5358732

K26089 10:10 AM 5358733

K26090 10:10 AM 5358734

K26091 10:10 AM 5358735

K26092 10:10 AM 5358736

K26093 10:15 AM 5358737

K26094 10:05 AM 5358738

K26095 10:10 AM 5358739

K26096 10:10 AM 5358740

K26097 10:05 AM 5358741

K26098 10:10 AM 5358742





K26099 10:15 AM 5378418

K26450 1415 5499063

K26753* 1233 5417900

K26754* 1229 5417910

K26755* 1231 5417926

K26757* 1232 5417927

K26758* 1230 5417928

K26759* 1234 5417944

K26760* 1228 5417951

K26761* 1227 5417959

K26762* 1235 5417966

K26764* 1236 5417970

K26774* 1237 5417974

K27071 9:25 AM 5406780

K27072 11:00 AM 5406789

K27073 1046 5406790

K27074 3:10 PM 5411720

K27075 129 5406818

K27076 3:25 PM 5406828

K27077 991 5406829

K27078 10:30 AM 5406831

K27079 11:50 AM 5406834

K27080 10:00 AM 5406835

K27081 9:50 AM 5406838

K27082 3:30 PM 5406839

K27083 10:35 AM 5406841

K27084 9:25 AM 5406843

K27085 9:55 AM 5406845

K27086 11:50 AM 5406848

K27087 1001 5406850

K27088 1000 5406851

K27089 1023 5406852

K27090 1011 5406853

K27091 1014 5406854

K27092 962 5406855

K27093 3:25 PM 5406856

K27094 822 5426009

K27095 875 5426011

K27096 876 5426012

K27097 69 5426015

K27098 12:05 PM 5426017

K27099 9:55 AM 5436568

K27100 13 5436571

K27437 1735 5337466

K27438 1739 5337469

K27439 1737 5337470

K27440 1786 5337473

K27441 1697 5337590

K27442 1702 5337591

K27443 1698 5337592

K27444 1696 5337594

K27445 1700 5337595

K27446 1699 5337605

K27447 1701 5337607

K27448 1710 5337609

K27449 1704 5337610

K27450 1708 5337614

K27451 597 5377628

K27452 598 5377629

K27453 601 5377630

K27454 629 5377631

K27455 605 5377633

K27456 666 5377777

K27457 670 5377778

K27458 635 5377634

K27459 623 5377635

K27460 611 5377637

K27461 646 5377641

K27462 612 5377642

K27463 613 5377643

K27464 615 5377644

K27465 662 5377647

K27466 708 5377645

K27467 649 5377648

K27468 758 5377649

K27469 631 5377650

K27470 757 5377651

K27471 658 5377760

K27472 682 5377761

K27473 683 5377765

K27474 620 5377766

K27475 622 5377767

K27476 628 5377768

K27477 610 5377770

K27478 627 5377771

K27479 604 5377772

K27480 634 5377773

K27481 633 5377774

K27482 606 5377775

K27483 600 5377776

K27484 630 5377779

K27485 667 5377780

K27486 676 5377781

K27487 678 5377782

K27488 709 5377783

K27489 706 5377784

K27490 679 5377785

K27491 680 5377786

K27492 687 5377787

K27493 674 5377788

K27494 675 5377789

K27495 669 5377848

K27496 668 5377849

K27497 672 5377850

K27498 673 5377851

K27499 671 5377852

K27500 677 5377853

K27501 685 5377854

K27502 684 5377855

K27503 686 5377856

K27504 681 5377857

K27505 712 5377858

K27506 710 5377859

K27507 705 5377860

K27508 765 5377861

K27509 707 5377862

K27510 761 5377863

K27511 760 5377864

K27512 762 5377865

K27513 766 5377866

K27514 711 5377867

K27515 759 5377868

K27516 804 5377869

K27517 803 5377870

K27518 806 5377871

K27519 805 5377872

K27520 807 5377873

K27521 808 5377874





K27522 809 5377875

K27523 810 5377876

K27524 599 5377877

K27525 350 5377878

K27526 375 5377879

K27527 560 5377880

K27528 559 5377881

K27529 325 5377882

K27530 347 5378010

K27531 346 5378011

K27532 349 5378012

K27533 348 5378013

K27534 385 5378897

K27535 386 5378898

K27536 387 5378899

K27537 390 5378900

K27538 388 5378901

K27539 389 5378902

K27540 392 5378903

K27541 391 5378904

K27542 393 5378905

K27543 394 5378624

K27544 396 5378625

K27545 395 5378626

K27546 397 5378627

K27547 398 5378628

K27548 399 5378629

K27549 400 5378630

K27550 401 5378631

K27551 1703 5337617

K27552 1715 5337619

K27553 1711 5337620

K27554 1707 5337632

K27555 1705 5337640

K27556 1716 5337641

K27557 1713 5337651

K27558 1721 5337655

K27559 1719 5337656

K27560 1720 5337658

K27561 1712 5337659

K27562 1718 5337660

K27563 1717 5337661

K27564 1714 5337664

K27565 1709 5337665

K27566 1706 5337666

K27567 814 5337670

K27568 886 5337671

K27569 813 5337672

K27570 816 5337673

K27571 815 5337674

K27572 818 5337675

K27573 1771 5337676

K27574 1766 5337678

K27575 1761 5337680

K27576 1773 5337681

K27577 1767 5337683

K27578 1772 5337684

K27579 1758 5337685

K27580 1762 5337686

K27581 1765 5337687

K27582 1770 5337690

K27583 1759 5337691

K27584 1769 5337692

K27585 1760 5337693

K27586 1764 5337695

K27587 1774 5337698

K27588 1763 5337699

K27589 1768 5337700

K27590 1775 5337707

K27591 1778 5337708

K27592 1785 5337709

K27593 1777 5337719

K27594 1781 5337736

K27595 1780 5337737

K27596 1779 5337738

K27597 1782 5337740

K27598 1776 5337745

K27599 1784 5337746

K27600 1783 5337747

K27601 821 5340690

K27602 820 5340691

K27603 999 5340692

K27604 1022 5340696

K27605 12:00 PM 5340698

K27606 12 5340710

K27607 14 5340711

K27608 17 5340714

K27609 18 5340715

K27610 16 5340716

K27611 15 5340720

K27612 20 5340728

K27613 19 5340730

K27614 260 5340732

K27615 259 5340738

K27616 1042 5340740

K27617 811 5340741

K27618 812 5340743

K27619 1502 5340745

K27620 1580 5340746

K27621 1805 5340749

K27622 1806 5340750

K27623 1810 5340751

K27624 9:05 AM 5340753

K27627 9:10 AM 5340761

K27630 10:45 AM 5329175

K27631 202 5342389

K27633 199 5342391

K27634 201 5342392

K27635 133 5355345

K27636 132 5342394

K27637 66 5342395

K27638 68 5342396

K27640 833 5342398

K27641 88 5342399

K27642 85 5342400

K27643 1788 5342401

K27644 23 5342402

K27645 24 5342403

K27647 67 5342405

K27649 249 5342407

K27650 3:20 PM 5342408

K28023 1101 5411875

K28024 1102 5411879

K28025 1106 5411880

K28026 1107 5411882

K28027 1104 5411886

K28028 1108 5411887

K28029 1105 5411889





K28030 11:55 AM 5411892

K28031 11:55 AM 5411898

K28032 11:55 AM 5411900

K28033 11:55 AM 5411901

K28034 11:55 AM 5411903

K28035 11:00 AM 5411907

K28036 10:55 AM 5411909

K28037 10:55 AM 5411911

K28038 10:55 AM 5411988

K28039 10:55 AM 5411989

K28040 10:55 AM 5411998

K28041 10:55 AM 5411999

K28042 11:00 AM 5412002

K28043 11:00 AM 5412006

K28044 10:55 AM 5412007

K28045 10:55 AM 5412015

K28046 10:55 AM 5412017

K28047 11:00 AM 5412018

K28048 11:00 AM 5412019

K28049 11:00 AM 5412003

K28050 11:20 AM 5412033

K28051 11:20 AM 5412037

K28052 11:15 AM 5412038

K28053 11:15 AM 5412042

K28054 11:15 AM 5412043

K28055 11:20 AM 5412044

K28056 11:15 AM 5412045

K28057 11:15 AM 5412048

K28058 11:15 AM 5412049

K28059 11:15 AM 5412051

K28060 11:15 AM 5412053

K28061 11:20 AM 5412056

K28062 11:15 AM 5412057

K28063 11:15 AM 5412064

K28064 10:25 AM 5412067

K28065 10:30 AM 5412068

K28066 10:25 AM 5412069

K28067 11:00 AM 5412072

K28068 11:20 AM 5412074

K28069 1103 5412075

K28071 9:40 AM 5412082

K28072 11:55 AM 5412084

K28073 9:55 AM 5412085

K28074 10:00 AM 5412086

K28075 11:15 AM 5412089

K28076 11:15 AM 5412091

K28077 1414 5424125

K28078 1416 5424126

K28079 1417 5424127

K28080 1437 5424128

K28081 1449 5424129

K28082 1435 5424130

K28083 1440 5424131

K28084 1436 5424132

K28085 1443 5424133

K28086 1427 5424134

K28087 1428 5424135

K28088 1429 5424136

K28089 1430 5424137

K28090 1432 5424138

K28091 1433 5424139

K28092 1434 5424140

K28093 1418 5424141

K28094 1421 5424142

K28095 1423 5424143

K28096 1420 5424144

K28097 1444 5424145

K28098 1424 5424146

K28099 1422 5424147

K28100 1426 5424148

K28101 1425 5424149

K28102 1419 5424150

K28104 1431 5424152

K28106 1439 5424154

K28107 1438 5424155

K28108 1442 5424156

K28109 1441 5424157

K28110 1446 5424158

K28111 1448 5424159

K28112 1445 5424160

K28114 1447 5424161

K28117 1475 5435399

K28118 1477 5435404

K28119 1478 5435407

K28120 1476 5435408

K28121 1479 5435412

K28122 1484 5435414

K28123 1486 5435417

K28124 1485 5435440

K28125 1482 5435463

K28126 1483 5435492

K28127 1481 5435495

K28128 1480 5435497

K28145 1334 5441722

K28147 1280 5457824

K28501 1326 5377172

K28503 1322 5377175

K28504 1306 5377179

K28505 1307 5377180

K28506 1314 5377185

K28507 1330 5377188

K28508 1323 5377191

K28509 1309 5377192

K28510 1321 5377193

K28511 1311 5377194

K28513 1328 5377196

K28515 1310 5377211

K28516 1313 5377214

K28517 1312 5377215

K28518 1324 5377217

K28519 1285 5377226

K28520 1308 5377227

K28521 1282 5377228

K28522 1284 5377229

K28523 1283 5377232

K28524 1286 5377233

K28525 1331 5377234

K28526 1327 5377235

K28527 1162 5377237

K28528 1163 5377238

K28529 1300 5377243

K28530 1303 5377249

K28531 1304 5377254

K28532 1302 5377259

K28533 1301 5377260

K28534 1170 5377261

K28535 1267 5377266

K28536 1253 5377267





K28537 1255 5377268

K28538 1335 5377269

K28539 1294 5377277

K28540 1295 5377281

K28541 1297 5377284

K28542 1296 5377287

K28543 1293 5377289

K28544 1298 5377291

K28545 1299 5377293

K28546 1265 5377296

K28547 1257 5377300

K28548 1266 5377302

K28549 1263 5377304

K28550 1264 5377307

K28551 1254 5377309

K28552 1258 5377532

K28553 1256 5377537

K28554 1325 5377540

K28555 1332 5377543

K28556 1333 5377546

K28557 1289 5377548

K28560 1274 5398093

K28561 1279 5398094

K28562 1305 5398096

K28563 1161 5398099

K28564 1164 5398103

K28565 1320 5398109

K28566 1278 5398111

K28567 1337 5398121

K28568 1259 5398128

K28569 1260 5398129

K28570 1277 5398147

K28571 1276 5398159

K28572 1272 5398162

K28573 1273 5398166

K28574 1271 5398168

K28575 1269 5398171

K28576 1270 5398172

K28577 1268 5398174

K28578 1281 5398176

K28579 1291 5398180

K28580 1292 5398181

K28581 1319 5398184

K28582 1317 5398185

K28583 1316 5398186

K28584 1318 5398188

K28585 1329 5398190

K28586 1315 5398200

K28587 1288 5398204

K28588 1287 5398247

K28589 1194 5398264

K28590 1261 5398272

K28591 1336 5398286

K28592 1290 5398287

K28593 1262 5398290

K28594 1275 5398292

K28595 11:45 AM 5398294

K28596 11:45 AM 5398297

K28597 11:45 AM 5398299

K28598 11:45 AM 5398303

K28599 11:45 AM 5398306

K28600 11:40 AM 5398308

K28601 11:45 AM 5398309

K28602 11:45 AM 5398310

K28603 11:45 AM 5398313

K28604 11:45 AM 5398315

K28956 1525 5472848

K28957 1523 5472845

K28958 1518 5472844

K28959 1516 5472843

K28960 1521 5472836

K28961 1522 5472837

K28962 1538 5472838

K28963 1515 5472847

K28964 1527 5472855

K28965 1529 5472852

K28966 1537 5472853

K28968 1528 5472858

K28969 1533 5472859

K28970 1531 5472860

K28971 1536 5472854

K28973 1530 5472856

K28974 1535 5472839

K28975 1526 5472840

K28976 1532 5472841

K28977 1534 5472842

K28978 1542 5472861

K28979 1541 5472862

K28980 1539 5472863

K28982 1514 5472835

K28983 ' 1513 5472834

K28984 1512 5472831

K28985 1507 5472833

K28986 1524 5472846

K28987 1517 5472849

K28988 1519 5472850

K28989 1520 5472851

K28992 10:30 AM 5489063

K28993 9:25 AM 5489064

K28994 9:30 AM 5489065

K28995 1501 5497432

K28996 1129 5495408

K28997 1496 5489387

K28998 10:30 AM 5485084

K29001 452 5378982

K29002 453 5378983

K29003 454 5378984

K29004 460 5378986

K29005 465 5378987

K29006 464 5378988

K29007 461 5378989

K29008 462 5378990

K29009 463 5378991

K29010 466 5378992

K29011 467 5378993

K29012 472 5378994

K29013 469 5379006

K29014 468 5379007

K29015 471 5379008

K29016 470 5379009

K29017 473 5379010

K29018 482 5379011

K29019 479 5379012

K29020 477 5379013

K29021 478 5379014

K29022 475 5379015

K29023 474 5379016

K29024 476 5379017





K29025 488 5379024

K29026 491 5379025

K29027 490 5379026

K29028 489 5379027

K29029 485 5379018

K29030 486 5379019

K29031 483 5379020

K29032 484 5379021

K29033 487 5379022

K29034 481 5379023

K29035 494 5379028

K29036 495 5379029

K29037 496 5379030

K29038 492 5379031

K29039 493 5379032

K29040 456 5379060

K29041 459 5379061

K29042 458 5379062

K29043 457 5379063

K29044 497 5379064

K29045 498 5379065

K29046 500 5379066

K29047 499 5379067

K29048 502 5379068

K29049 501 5379069

K29050 504 5379070

K29051 505 5379071

K29052 506 5379072

K29053 503 5379073

K29054 511 5379074

K29055 509 5379075

K29056 510 5379076

K29057 508 5379077

K29058 507 5379078

K29059 513 5379079

K29060 512 5379080

K29061 515 5379081

K29062 514 5379082

K29063 516 5379083

K29064 517 5379084

K29065 518 5379085

K29066 519 5379086

K29067 521 5379087

K29068 520 5379088

K29069 423 5379089

K29070 480 5379090

K29071 535 5379091

K29072 536 5379092

K29073 537 5379093

K29074 538 5379094

K29075 539 5379095

K29076 540 5379096

K29077 541 5379097

K29078 542 5379098

K29079 543 5379099

K29080 550 5379100

K29081 551 5379101

K29082 552 5379102

K29083 553 5379103

K29084 523 5379104

K29085 522 5379105

K29086 524 5379106

K29087 525 5379107

K29088 526 5379108

K29089 528 5379109

K29090 527 5379110

K29091 544 5379111

K29092 545 5379112

K29093 546 5379113

K29094 529 5379114

K29095 530 5379115

K29096 533 5379116

K29097 531 5379117

K29098 532 5379118

K29099 547 5379119

K29100 549 5379120

K29101 548 5379121

K29102 534 5379122

K29103 409 5379123

K29104 404 5379124

K29105 403 5379125

K29106 405 5379126

K29107 407 5379127

K29108 406 5379128

K29109 408 5379129

K29110 3:10 PM 5379130

K29111 3:10 PM 5379131

K29112 984 5379132

K29113 3:20 PM 5379134

K29114 3:20 PM 5379135

K29115 3:20 PM 5379136

K29116 3:15 PM 5379137

K29117 3:20 PM 5379138

K29118 3:20 PM 5379139

K29119 3:20 PM 5379140

K29120 594 5379141

K29122 866 5379142

K29123 853 5379143

K29124 930 5379144

K29125 756 5379145

K29126 376 5379146

K29127 321 5379133

K29128 596 5379147

K29129 595 5379148

K29130 902 5379149

K29131 10:55 AM 5379150

K29132 11:00 AM 5379151

K29133 11:00 AM 5379152

K29134 12:05 PM 5379153

K29135 12:05 PM 5379154

K29136 3:15 PM 5379155

K29137 3:15 PM 5379156

K29138 11:00 AM 5379157

K29139 10:55 AM 5379158

K29140 592 5379159

K29141 591 5379160

K29142 590 5379161

K29143 580 5379162

K29144 588 5379163

K29145 589 5379165

K29146 584 5379167

K29147 587 5379168

K29148 593 5379169

K29149 583 5379170

K29150 582 5379171

K29151 581 5379172

K29152 585 5379173

K29153 586 5379174





K29154 324 5379175

K29155 323 5379176

K29156 322 5379177

K29157 558 5379178

K29158 3:20 PM 5381429

K29159 556 5381436

K29160 10:00 AM 5381437

K29161 9:15 AM 5381440

K29162 9:20 AM 5381443

K29163 959 5381444

K29164A 961 5381449

K29165 983 5381448

K29166 960 5381817

K29167 3:30 PM 5381818

K29168 9:30 AM 5381819

K29169 12:00 PM 5381820

K29170 6 5381821

K29171 994 5381822

K29172 1048 5381823

K29173 1051 5381824

K29174 1050 5381825

K29175 1049 5382678

K29176 10:00 AM 5382679

K29177 9:25 AM 5382680

K29178 939 5382681

K29179 1058 5382682

K29180 1061 5382684

K29181 1062 5382685

K29182 1053 5382686

K29183 1060 5382687

K29184 1054 5382688

K29185 1056 5382689

K29186 931 5382690

K29187 1055 5382691

K29188 1059 5382692

K29189 11:10 AM 5382693

K29191 3:30 PM 5382723

K29192 173 5382725

K29193 217 5382726

K29194 219 5382729

K29195 218 5382730

K29196 72 5382731

K29197 1039 5382732

K29198 39 5382733

K29199 455 5379180

K29200 318 5379179

K29201 258 5382734

K29202 8 5382735

K29203 7 5382736

K29204 9 5382737

K29205 10 5382738

K29206 11 5382739

K29207 5 5382740

K29208 774 5382741

K29209 1846 5382742

K29210 1033 5382762

K29211 9:20 AM 5382772

K29212 96 5382773

K29213 1044 5382774

K29214 125 5382775

K29215 123 5382776

K29216 122 5382777

K29217 118 5382778

K29218 119 5382779

K29219 120 5382783

K29220 116 5382787

K29221 117 5382788

K29222 1790 5382790

K29223 1792 5382791

K29224 1795 5382792

K29225 1794 5382793

K29226 1793 5382794

K29227 1789 5382795

K29228 1503 5382798

K29229 1034 5382799

K29230 1031 5382800

K29231 1035 5382801

K29232 1032 5382802

K29233 3:20 PM 5388793

K29234 3:25 PM 5388794

K29235 3:25 PM 5388795

K29236 3:25 PM 5388796

K29237 3:20 PM 5388797

K29238 3:25 PM 5388798

K29239 3:25 PM 5388799

K29240 3:25 PM 5388809

K29241 3:25 PM 5388819

K29242 942 5388820

K29243 763 5388821

K29244 764 5388822

K29245 792 5388823

K29246 794 5388824

K29247 791 5388825

K29248 787 5388826

K29249 790 5388827

K29250 789 5388828

K29251 793 5388829

K29252 788 5388830

K29253 720 5388831

K29254 786 5388832

K29255 783 5388833

K29256 782 5388834

K29257 785 5388835

K29258 784 5388836

K29259 1490 5424012

K29260 1499 5424013

K29261 1654 5424014

K29262 1650 5424015

K29263 1629 5424016

K29264 1652 5424017

K29265 1628 5424018

K29266 1634 5424019

K29267 1644 5424020

K29268 1639 5424021

K29269 1636 5424022

K29270 1646 5424023

K29271 1635 5424024

K29272 1638 5424025

K29273 1643 5424026

K29274 1653 5424027

K29275 1637 5424028

K29276 1645 5424029

K29277 1655 5424030

K29278 1627 5424031

K29279 1631 5424032

K29280 1660 5424033

K29281 1657 5424034

K29282 1658 5424035





K29283 1648 5424036

K29284 1663 5424037

K29285 1651 5424038

K29286 1656 5424039

K29287 1647 5424040

K29288 1661 5424041

K29289 1641 5424042

K29290 1659 5424043

K29291 1662 5424044

K29292 1630 5424045

K29293 1633 5424046

K29294 1640 5424047

K29295 1632 5424048

K29296 1649 5424049

K29297 1642 5424050

K29298 1577 5424051

K29299 1570 5424052

K29300 1609 5424053

K29301 1614 5424054

K29302 1591 5424055

K29303 1596 5424056

K29304 1587 5424057

K29305 1618 5424058

K29306 1617 5424059

K29307 1619 5424060

K29308 1623 5424061

K29309 1624 5424062

K29310 1616 5424063

K29311 1621 5424064

K29312 1611 5424065

K29313 1597 5424066

K29314 1610 5424067

K29315 1615 5424068

K29316 1613 5424069

K29317 1626 5424070

K29318 1625 5424071

K29319 1605 5424072

K29320 1620 5424073

K29321 1608 5424074

K29322 1622 5424075

K29323 1598 5424076

K29324 1592 5424077

K29325 1600 5424078

K29326 1612 5424079

K29327 1590 5424080

K29328 1586 5424081

K29329 1589 5424082

K29330 1588 5424083

K29331 1409 5423993

K29332 10:25 AM 5484153

K29333 10:15 AM 5484159

K29334 10:15 AM 5484162

K29335 10:40 AM 5484175

K29336 10:40 AM 5484186

K29337 10:35 AM 5484136

K29338 10:35 AM 5484139

K29339 10:35 AM 5484141

K29340 10:35 AM 5484142

K29341 10:35 AM 5484144

K29342 10:35 AM 5484145

K29343 10:35 AM 5484147

K29344 10:15 AM 5484148

K29345 10:40 AM 5484150

K29346 10:40 AM 5484216

K29347 10:00 AM 5484237

K29348 10:00 AM 5484239

K29351 1370 5444656

K29352 1371 5444659

K29353 1372 5444663

K29354 1373 5444664

K29355 1377 5444666

K29356 1374 5444669

K29357 1375 5444671

K29358 1379 5444673

K29359 1376 5444674

K29360 1378 5444675

K29361 1381 5444681

K29362 1380 5444683

K29363 1355 5447995

K29364 1356 5448000

K29365 1357 5448003

K29366 1361 5448007

K29367 1360 5448009

K29368 1359 5448010

K29369 1358 5448020

K29370 1367 5448022

K29371 1362 5448023

K29372 1363 5448028

K29373 1368 5448034

K29374 1364 5448036

K29375 1365 5448037

K29376 1369 5448041

K29377 1366 5448043

K29378 1450 5448536

K29379 1451 5448540

K29380 1452 5448544

K29381 1454 5448546

K29382 1453 5448554

K29383 1456 5448556

K29384 1455 5448562

K29385 1458 5448564

K29386 1459 5448569

K29387 1457 5448570

K29388 1460 5450445

K29389 1472 5450446

K29390 1461 5450447

K29391 1465 5450448

K29392 1462 5450449

K29393 1464 5450450

K29394 1463 5450451

K29395 1466 5450452

K29396 1467 5450453

K29397 1469 5450454

K29398 1468 5450455

K29399 1471 5450456

K29400 1473 5450457

K29401 1470 5450458

K29402 1584 5450646

K29403 1585 5450647

K29404 1578 5450648

K29405 1674 5450649

K29406 1686 5450650

K29407 1685 5450651

K29408 1680 5450652

K29409 1687 5450663

K29410 1691 5450664

K29411 1673 5450665

K29412 1671 5450666





K29413 1668 5450667

K29414 1669 5450668

K29415 1666 5450669

K29416 1799 5450670

K29417 1581 5450671

K29418 1574 5450672

K29419 1797 5450673

K29420 1575 5450674

K29421 1804 5450675

K29422 1571 5450676

K29423 1803 5450677

K29424 1583 5450678

K29425 1579 5450679

K29426 1576 5450680

K29427 1682 5450681

K29428 1681 5450682

K29429 1676 5450683

K29430 1678 5450684

K29431 1684 5450685

K29432 1675 5450686

K29433 1683 5450687

K29434 1665 5450688

K29435 1667 5450689

K29436 1664 5450690

K29437 1798 5450691

K29438 1801 5450692

K29439 1679 5450693

K29440 1677 5450694

K29441 1688 5450695

K29442 1693 5450696

K29443 1670 5450697

K29444 1582 5450698

K29445 1573 5450699

K29446 1802 5450700

K29447 1694 5450701

K29448 1689 5450702

K29449 1692 5450703

K29450 1690 5450704

K29451 1695 5450705

K29452 1672 5450706

K29453 1572 5450707

K29454 1800 5450708

K29981 1540 5472864

K30001 10:10 AM 5367348

K30002 10:05 AM 5367349

K30003 10:15 AM 5367350

K30004 10:05 AM 5367351

K30005 10:05 AM 5367352

K30006 10:05 AM 5367353

K30007 10:05 AM 5367354

K30008 10:10 AM 5367355

K30009 10:05 AM 5367358

K30010 10:10 AM 5367359

K30011 10:05 AM 5367360

K30012 10:05 AM 5367362

K30013 10:05 AM 5367363

K30014 10:15 AM 5367365

K30015 10:15 AM 5367367

K30016 10:15 AM 5367369

K30017 10:05 AM 5367371

K30018 10:15 AM 5367385

K30019 136 5367386

K30020 137 5367388

K30021 138 5367389

K30022 139 5367390

K30023 140 5367391

K30024 251 5367392

K30025 252 5367393

K30026 250 5367394

K30027 253 5367395

K30028 254 5367396

K30029 255 5367397

K30031 257 5367399

K30032 256 5367400

K30033 2:15 PM 5378660

K30034 2:00 PM 5378661

K30035 2:40 PM 5378662

K30036 2:40 PM 5378663

K30037 2:30 PM 5378664

K30038 2:20 PM 5378665

K30039 2:40 PM 5378666

K30040 2:05 PM 5378668

K30041 2:45 PM 5378669

K30042 2:05 PM 5378670

K30043 2:20 PM 5378671

K30044 2:00 PM 5378672

K30045 2:30 PM 5378673

K30046 2:00 PM 5378674

K30047 2:40 PM 5378675

K30048 2:20 PM 5378676

K30049 2:35 PM 5378677

K30050 2:45 PM 5378678

K30051 2:35 PM 5378679

K30052 2:40 PM 5378680

K30053 2:40 PM 5378681

K30054 2:00 PM 5378682

K30056 2:00 PM 5378683

K30057 2:35 PM 5378684

K30058 2:10 PM 5378685

K30059 2:25 PM 5378686

K30060 2:50 PM 5378687

K30061 2:20 PM 5378688

K30062 2:10 PM 5378689

K30063 2:30 PM 5378690

K30064 2:05 PM 5378691

K30065 2:30 PM 5378692

K30066 2:10 PM 5378693

K30067 2:40 PM 5378694

K30068 2:40 PM 5378695

K30069 2:05 PM 5378696

K30070 2:35 PM 5378697

K30071 2:30 PM 5378698

K30072 2:10 PM 5378699

K30073 2:40 PM 5378700

K30074 2:10 PM 5378701

K30075 2:10 PM 5378702

K30076 2:15 PM 5378703

K30077 2:00 PM 5378667

K30078 2:25 PM 5378704

K30079 2:45 PM 5378705

K30080 2:25 PM 5378706

K30081 2:45 PM 5378707

K30082 2:00 PM 5378708

K30083 2:05 PM 5378709

K30084 3:15 PM 5378710

K30085 2:45 PM 5378711

K30086 2:20 PM 5378712

K30087 2:05 PM 5378713





K30088 2:45 PM 5378714

K30089 2:15 PM 5378715

K30090 2:40 PM 5378716

K30091 2:40 PM 5378717

K30092 2:10 PM 5378718

K30093 2:20 PM 5378719

K30094 2:30 PM 5378720

K30095 2:20 PM 5378721

K30096 2:25 PM 5378722

K30097 2:05 PM 5378723

K30098 2:25 PM 5378724

K30099 2:10 PM 5378725

K30100 2:15 PM 5378726

K30101 2:35 PM 5378727

K30102 2:45 PM 5378728

K30103 2:30 PM 5378729

K30104 2:35 PM 5378730

K30105 2:45 PM 5378731

K30106 2:50 PM 5378732

K30107 2:35 PM 5378733

K30108 2:45 PM 5378734

K30109 2:30 PM 5378735

K30110 2:50 PM 5378736

K30111 2:30 PM 5378737

K30112 2:15 PM 5378738

K30113 2:35 PM 5378739

K30114 2:30 PM 5378740

K30115 2:25 PM 5378741

K30116 2:50 PM 5378742

K30117 2:50 PM 5378743

K30118 2:30 PM 5378744

K30119 2:25 PM 5378745

K30120 2:15 PM 5378746

K30121 2:20 PM 5378747

K30122 2:00 PM 5378748

K30123 2:35 PM 5378749

K30124 2:00 PM 5378750

K30125 2:05 PM 5378751

K30126 2:00 PM 5378752

K30127 2:05 PM 5378753

K30128 2:05 PM 5378754

K30129 2:35 PM 5378755

K30130 2:15 PM 5378756

K30131 2:35 PM 5378757

K30132 2:25 PM 5378758

K30133 932 5378759

K30134 2:30 PM 5378760

K30135 1037 5378761

K30136 1025 5378762

K30137 11:50 AM 5378763

K30138 11:50 AM 5378764

K30139 11:50 AM 5378765

K30140 11:50 AM 5378766

K30141 11:50 AM 5378767

K30142 11:50 AM 5378768

K30143 11:55 AM 5378769

K30144 11:50 AM 5378770

K30145 11:55 AM 5378771

K30146 11:50 AM 5378772

K30147 9:30 AM 5378773

K30148 11:50 AM 5378774

K30149 11:50 AM 5378775

K30150 3:25 PM 5378776

K30151 361 5378777

K30152 358 5378778

K30153 359 5378779

K30154 360 5378780

K30155 10:50 AM 5378781

K30156 10:55 AM 5378782

K30157 10:50 AM 5378783

K30158 10:50 AM 5378784

K30159 159 5378785

K30160 164 5378786

K30161 156 5378787

K30162 160 5378788

K30163 161 5378789

K30164 163 5378790

K30165 153 5378791

K30166 155 5378792

K30167 154 5378793

K30168 143 5378794

K30169 158 5378795

K30170 157 5378796

K30171 144 5378797

K30172 147 5378798

K30173 146 5378799

K30174 142 5378800

K30175 141 5378801

K30176 148 5378802

K30177 145 5378803

K30178 11:05 AM 5378804

K30179 11:10 AM 5378805

K30180 796 5378806

K30181 1005 5378807

K30182 1006 5378808

K30183 1004 5378809

K30184 1007 5378810

K30185 1009 5378811

K30186 1008 5378812

K30187 1002 5378813

K30188 1003 5378814

K30189 62 5378815

K30190 61 5378816

K30191 60 5378817

K30192 55 5378818

K30193 57 5378819

K30194 59 5378820

K30195 58 5378821

K30196 54 5378822

K30197 56 5378823

K30198 53 5378824

K30199 52 5378825

K30200 51 5378826

K30201 50 5378827

K30202 65 5378828

K30203 63 5378829

K30204 64 5378830

K30205 1038 5378831

K30206 972 5378832

K30207 974 5378833

K30208 1030 5378834

K30209 981 5378835

K30210 973 5378836

K30211 1847 5378837

K30212 855 5378838

K30213 975 5378842

K30214 987 5378843

K30215 1807 5378844





K30216 124 5378846

K30217 121 5378847

K30218 1796 5378848

K30219 1043 5378849

K30220 1848 5378850

K30221 1842 5378851

K30222 976 5378852

K30223 1843 5378853

K30226 1791 5378854

K30227 1041 5378855

K30228 130 5378856

K30230 837 5378858

K30231 823 5378859

K30232 1026 5378860

K30233 1028 5378861

K30234 1045 5378862

K30235 1027 5378863

K30236 997 5378864

K30239 10:35 AM 5378865

K30240 413 5378866

K30241 795 5378867

K30242 126 5378868

K30243 71 5378869

K30244 978 5378870

K30245 982 5378871

K30246 980 5378872

K30247 979 5378873

K30248 11:10 AM 5378874

K30249 10:00 AM 5378875

K30250 985 5378876

K30251 380 5378877

K30252 379 5378878

K30253 377 5378879

K30254 378 5378880

K30255 382 5378881

K30256 381 5378882

K30257 384 5378883

K30258 383 5378884

K30259 1382 5423958

K30260 1384 5423959

K30261 1383 5423960

K30262 1389 5423961

K30263 1385 5423962

K30264 1387 5423963

K30265 1386 5423964

K30266 1388 5423965

K30267 1391 5423966

K30268 1390 5423967

K30269 1392 5423968

K30271 1394 5423970

K30272 1395 5423971

K30273 1407 5423972

K30274 1393 5423973

K30275 1397 5423974

K30276 1396 5423975

K30277 1399 5423976

K30278 1404 5423977

K30279 1413 5423978

K30280 1412 5423979

K30281 1400 5423980

K30282 1401 5423983

K30283 1406 5423984

K30284 1405 5423985

K30285 1403 5423986

K30286 1402 5423987

K30287 1410 5423988

K30288 1411 5423989

K30289 1408 5423990

K30290 1398 5423991

K30291 1604 5424084

K30292 1593 5424088

K30293 1606 5424089

K30294 1607 5424090

K30295 1601 5424091

K30296 1595 5424092

K30297 1603 5424093

K30298 1594 5424094

K30299 1602 5424095

K30300 1599 5424096

K30301 1890 5454703

K30302 10:40 AM 5454704

K30303 10:40 AM 5454705

K30304 10:40 AM 5454706

K30305 1889 5454707

K30306 10:40 AM 5454708

K30307 1891 5454709

K30308 9:15 AM 5454710

K30309 9:15 AM 5454711

K30310 10:45 AM 5454714

K30311 10:45 AM 5454713

K30312 11:05 AM 5454715

K30313 10:45 AM 5454716

K30314 11:05 AM 5454717

K30315 11:05 AM 5454718

K30316 1872 5454719

K30317 1870 5454720

K30318 1873 5454722

K30319 1874 5454723

K30320 10:50 AM 5454724

K30321 10:50 AM 5454725

K30322 1881 5454726

K30323 9:35 AM 5454727

K30324 9:45 AM 5454728

K30325 11:10 AM 5454729

K30326 11:10 AM 5454730

K30327 11:10 AM 5454731

K30328 11:10 AM 5454732

K30329 9:20 AM 5454734

K30330 9:05 AM 5454735

K30331 1887 5454736

K30332 1888 5454737

K30333 9:05 AM 5454738

K30334 11:10 AM 5454733

K30335 9:35 AM 5454739

K30336 1920 5454740

K30337 9:20 AM 5454741

K30338 9:30 AM 5454742

K30339 9:10 AM 5454743

K30340 1869 5454744

K30341 1871 5454745

K30342 1867 5454746

K30343 1868 5454747

K30344 1921 5454748

K30345 1875 5454749

K30346 1914 5461951

K30347 1915 5461952

K30348 1917 5461953

K30349 1916 5461954





K30350 1918 5461955

K30351 1885 5461957

K30352 1884 5461958

K30353 1886 5461959

K30354 1883 5461960

K30355 1877 5461961

K30356 1876 5461962

K30357 1892 5461963

K30358 1882 5461964

K30359 1178 5461965

K30362 1922 5461968

K30363 10:45 AM 5461969

K30364 10:45 AM 5461970

K30365 1879 5461971

K30366 1880 5461972

K30367 10:40 AM 5461973

K30368 9:05 AM 5461974

K30369 1878 5461975

K30370 11:10 AM 5461976

K30371 10:50 AM 5461978

K30372 1177 5461979

K30373 10:45 AM 5461980

K30374 10:50 AM 5461981

K30375 10:45 AM 5461982

K30376 10:45 AM 5461983

K30377 9:35 AM 5461986

K30378 10:50 AM 5461985

K30379 10:50 AM 5461987

K30380 10:45 AM 5461988

K30381 10:50 AM 5461989

K30382 1919 5461990

K30383 9:50 AM 5461991

K30384 9:40 AM 5461992

K30385 10:45 AM 5461993

K30386 1866 5461994

K30387 1133 5461995

K30388 1134 5461996

K30389 9:30 AM 5461997

K30390 9:25 AM 5461998

K30391 9:45 AM 5461999

K30392 9:40 AM 5462001

K30393 9:50 AM 5462002

K30394 9:45 AM 5462003

K30395 9:50 AM 5462004

K30396 9:55 AM 5462005

K30397 1894 5464442

K30398 1899 5464443

K30399 1893 5464444

K30400 1896 5464445

K30401 1895 5464446

K30402 1897 5464448

K30403 1901 5464451

K30404 1900 5464453

K30405 1898 5464454

K30406 1902 5464455

K30407 9:25 AM 5464456

K30408 10:30 AM 5464457

K30409 9:20 AM 5464458

K30410 11:55 AM 5464460

K30411 11:05 AM 5464461

K30412 11:05 AM 5464462

K30413 11:00 AM 5464463

K30414 10:50 AM 5464464

K30415 11:05 AM 5464465

K30416 11:05 AM 5464466

K30417 11:05 AM 5464467

K30418 9:45 AM 5464468

K30901 273 5359117

K30902 282 5359118

K30903 276 5359119

K30904 281 5359120

K30905 278 5359121

K30906 277 5359122

K30907 275 5359123

K30908 283 5359124

K30909 272 5359125

K30910 284 5359126

K30911 279 5359127

K30912 280 5359128

K30913 998 5359129

K30914 293 5359130

K30915 274 5359131

K30916 291 5359132

K30917 289 5359133

K30918 290 5359134

K30919 292 5359135

K30920 3:10 PM 5359136

K30921 3:10 PM 5359137

K30922 3:10 PM 5359138

K30923 1:25 PM 5359076

K30924 1:40 PM 5359077

K30925 1:35 PM 5359078

K30926 1:25 PM 5359079

K30927 1:35 PM 5359080

K30928 1:25 PM 5359081

K30929 1:40 PM 5359082

K30930 1:25 PM 5359083

K30931 1:25 PM 5359084

K30932 1:20 PM 5359085

K30933 3:00 PM 5359086

K30934 3:05 PM 5359087

K30935 2:55 PM 5359088

K30936 2:50 PM 5359089

K30937 3:05 PM 5359090

K30938 3:05 PM 5359091

K30939 3:15 PM 5359092

K30940 2:55 PM 5359184

K30941 3:15 PM 5359185

K30942 1:30 PM 5359186

K30943 1:35 PM 5359187

K30944 1:40 PM 5359188

K30945 1:35 PM 5359189

K30946 1:30 PM 5359190

K30947 1:20 PM 5359191

K30948 1:55 PM 5359192

K30949 1:30 PM 5359193

K30950 1:45 PM 5359194

K30951 1:35 PM 5359195

K30952 1:20 PM 5359196

K30953 1:20 PM 5359197

K30954 1:45 PM 5359198

K30955 3:20 PM 5359199

K30956 12:40 PM 5359200

K30957 12:20 PM 5359201

K30958 12:15 PM 5359202

K30959 12:55 PM 5359203

K30960 12:45 PM 5359204

K30961 12:45 PM 5359205





K30962 12:25 PM 5359206

K30963 1:00 PM 5359207

K30964 1:05 PM 5359208

K30965 1:15 PM 5359209

K30966 12:25 PM 5359210

K30967 12:45 PM 5359211

K30968 1:55 PM 5359212

K30969 1:30 PM 5359213

K30970 1:55 PM 5359214

K30971 1:40 PM 5359215

K30972 1:35 PM 5359216

K30973 1:20 PM 5359217

K30974 1:35 PM 5359218

K30975 1:30 PM 5359219

K30976 3:15 PM 5359220

K30977 3:00 PM 5359221

K30978 1:10 PM 5359222

K30979 12:40 PM 5359223

K30980 1:45 PM 5359224

K30981 1:20 PM 5359225

K30982 12:50 PM 5359226

K30983 1:35 PM 5359227

K30984 12:20 PM 5359228

K30985 12:50 PM 5359229

K30986 1:15 PM 5359230

K30987 1:00 PM 5359231

K30988 1:15 PM 5359232

K30989 12:40 PM 5359233

K30990 12:50 PM 5359234

K30991 1:00 PM 5359235

K30992 1:15 PM 5359236

K30993 1:10 PM 5359237

K30994 3:15 PM 5359242

K30995 1:35 PM 5359243

K30996 1:35 PM 5359244

K30997 1:45 PM 5359245

K30998 1:45 PM 5359246

K30999 1:30 PM 5359247

K31000 1:40 PM 5359248

K31001 1:25 PM 5359249

K31002 1:50 PM 5359250

K31003 1:45 PM 5359251

K31004 1:30 PM 5359252

K31005 1:55 PM 5359253

K31006 1:25 PM 5359254

K31007 2:55 PM 5359255

K31008 3:05 PM 5359256

K31009 1:25 PM 5359257

K31010 3:05 PM 5359258

K31011 3:05 PM 5359259

K31012 438 5359260

K31013 440 5359261

K31014 439 5359262

K31015 428 5359263

K31016 2:50 PM 5359264

K31017 3:15 PM 5359265

K31018 2:50 PM 5359266

K31019 3:05 PM 5359267

K31020 2:35 PM 5379033

K31021 2:20 PM 5379034

K31022 2:15 PM 5379035

K31023 2:10 PM 5379036

K31024 2:15 PM 5379037

K31025 2:45 PM 5379038

K31026 2:20 PM 5379039

K31027 2:40 PM 5379040

K31028 3:30 PM 5379041

K31029 2:05 PM 5379042

K31030 2:25 PM 5379043

K31031 2:20 PM 5379044

K31032 2:10 PM 5379045

K31033 2:25 PM 5379046

K31034 2:05 PM 5379047

K31035 2:15 PM 5379048

K31036 2:25 PM 5379049

K31037 2:45 PM 5379050

K31038 2:20 PM 5379051

K31039 2:10 PM 5379052

K31040 2:00 PM 5379053

K31041 2:15 PM 5379054

K31042 2:15 PM 5379055

K31043 2:10 PM 5379056

K31044 2:00 PM 5379057

K31045 2:25 PM 5379058

K31046 2:45 PM 5379059

K31047 2:55 PM 5378978

K31048 3:00 PM 5378979

K31049 3:00 PM 5378980

K31050 3:00 PM 5378981

K31051 1:50 PM 5378923

K31052 1:30 PM 5378924

K31053 1:40 PM 5378925

K31054 1:50 PM 5378926

K31055 1:50 PM 5378927

K31056 1:50 PM 5378928

K31057 1:25 PM 5378929

K31058 1:50 PM 5378930

K31059 12:35 PM 5378931

K31060 12:35 PM 5378932

K31061 12:25 PM 5378933

K31062 12:45 PM 5378934

K31063 12:30 PM 5378935

K31064 3:00 PM 5378949

K31065 1:50 PM 5378948

K31066 1:00 PM 5378950

K31067 12:45 PM 5378951

K31068 12:35 PM 5378952

K31069 12:20 PM 5378953

K31070 1:45 PM 5378954

K31071 1:40 PM 5378955

K31072 1:20 PM 5378956

K31073 1:25 PM 5378957

K31074 1:55 PM 5378958

K31075 1:50 PM 5378959

K31076 1:50 PM 5378960

K31077 1:55 PM 5378961

K31078 3:10 PM 5378962

K31079 1:35 PM 5378963

K31080 2:55 PM 5378964

K31081 3:10 PM 5378965

K31082 3:00 PM 5378966

K31083 3:00 PM 5378967

K31084 3:05 PM 5378968

K31085 2:50 PM 5378969

K31086 3:00 PM 5378970

K31087 2:55 PM 5378972

K31088 1:20 PM 5378922

K31089 1:50 PM 5378921





K31090 1:20 PM 5378920

K31091 3:05 PM 5378918

K31092 2:55 PM 5378914

K31093 3:00 PM 5378913

K31094 2:55 PM 5378912

K31095 2:55 PM 5378911

K31096 1:40 PM 5378910

K31097 1:45 PM 5378909

K31098 1:20 PM 5378908

K31099 1:30 PM 5378907

K31100 1:40 PM 5378906

K32251 27 5494390

K32252 34 5494391

K32253 29 5494394

K32254 28 5494396

K32255 30 5494403

K32256 31 5494405

K32257 38 5494408

K32258 127 5494409

K32259 1024 5494434

K32352 1839 5485485

K32353 1836 5485486

K32354 1838 5485487

K32355 1830 5485488

K32356 1831 5485489

K32357 1835 5485490

K32358 1826 5485504

K32359 1834 5485491

K32360 1832 5485492

K32361 1833 5485493

K32363 1828 5485494

K32364 1837 5485495

K32365 1827 5485496

K32366 1823 5485497

K32367 1824 5485498

K32368 1820 5485499

K32369 1821 5485500

K32370 1825 5485501

K32371 1819 5485502

K32374 1844 5497027

K32375 1845 5497430

K32394 1818 5485475

K32395 1814 5485476

K32396 1816 5485477

K32399 1817 5485474

K32400 1822 5485503

K32501 9:35 AM 5480695

K32502 9:45 AM 5480696

K32503 9:40 AM 5480697

K32504 9:20 AM 5480720

K32504--D1 9:30 AM 5480698

K32505 9:05 AM 5480699

K32506 9:25 AM 5480700

K32507 9:15 AM 5480701

K32508 9:25 AM 5480702

K32509 9:40 AM 5480703

K32510 9:55 AM 5480704

K32512 9:10 AM 5480705

K32513 9:40 AM 5480706

K32514 9:10 AM 5480707

K32515 9:15 AM 5480708

K32516 9:20 AM 5480709

K32517 9:30 AM 5480710

K32518 9:45 AM 5480711

K32519 9:55 AM 5480712

K32520 9:50 AM 5480713

K32521 9:45 AM 5480714

K32522 10:00 AM 5480715

K32523 9:40 AM 5480716

K32524 9:35 AM 5480717

K32525 9:45 AM 5480718

K32526 9:50 AM 5480719

K32527 9:15 AM 5482846

K32528 9:55 AM 5482847

K32529 9:10 AM 5482848

K32530 9:10 AM 5482849

K32531 9:15 AM 5482850

K32532 9:20 AM 5482851

K32533 9:35 AM 5483166

K32534 9:40 AM 5483167

K32535 9:40 AM 5483168

K32536 9:10 AM 5483169

K32537 9:50 AM 5483170

K32538 11:05 AM 5483171

K32539 12:00 PM 5486817

K32540 9:40 AM 5486818

K32541 12:00 PM 5486819

K32542 12:00 PM 5486820

K32543 12:00 PM 5486821

K32544 9:45 AM 5486822

K32545 9:45 AM 5486823

K32546 9:35 AM 5486824

K32547 9:25 AM 5486825

K32548 9:35 AM 5486826

K32549 9:30 AM 5486827

K32550 9:50 AM 5486828

K32551 9:50 AM 5486829

K32552 9:45 AM 5486830

K32553 10:00 AM 5486831

K32554 11:10 AM 5486832

K32555 9:50 AM 5486833

K32556 11:10 AM 5486836

K32557 9:05 AM 5486834

K32558 9:10 AM 5486835

K32559 10:00 AM 5488239

K32560 10:00 AM 5488241

K32561 9:55 AM 5488242

K32562 10:00 AM 5488243

K32563 9:55 AM 5488244

K32564 9:35 AM 5488245

K32565 9:05 AM 5488850

K32566 9:40 AM 5488864

K32567 9:55 AM 5488923

K32568 9:30 AM 5488959

K32569 11:05 AM 5488968

K32570 11:05 AM 5488985

K32571 9:35 AM 5489075

K32572 9:45 AM 5489071

K32573 9:35 AM 5489072

K32574 9:35 AM 5489073

K32575 9:05 AM 5489074

K32576 9:30 AM 5489322

K32577 9:15 AM 5489326

K32578 11:10 AM 5489328

K32579 9:10 AM 5489358

K32580 9:20 AM 5489393

K32581 9:25 AM 5489392

U547527* 1474 5487526

KRUSE ENERGY AUCTIONEERS VIRTUAL AUCTION …

Documents

Transcript of KRUSE ENERGY AUCTIONEERS VIRTUAL AUCTION …