Krossi - Schiavello Group · Desk Bases fixed height range I height adjustable range I leg style...

technical

Krossi

Krossi’s modular design, engineering and material selection is based on Schiavello’s environmentaldesign principals to reduce environmental impact.

Krossi Desking SystemHybrid Desking / Table System with minimum understructure, maximum capabilities and discretely integrated ergonomics. Design efficiency, environmentally considered. A core workplace planning element.

Indexdesk bases 02–04bridge clusters 05–06round tables 07rectilinear meeting and boardroom tables 08desking components (legs) 09–10worktops 11system 18 12cable reticulation 13–14lettric soft-wiring system 15–16product specifications 17

krossi _01

ONLY AVAILABLE IN BRIDGED CLUSTERSNOT FOR INDIVIDUAL USE






krossi _02

Desk Basesfixed height range I height adjustable range I leg style options

Krossi desks are available as both fixed height and height adjustable. The illustrations below show the undercarriages of freestanding desks in fixed height as well as the five height adjustable options.

Each option accommodates varying requirements, offering maximum convenience based upon frequency of adjustment.

Unique to the system is the ability to vary desk heights independently along a single plane. Facilitating sit possibilities of 610 mm - 900 mm with the single stage leg or sit and stand possibilities of 610 mm - 1200 mm with the dual stage leg.

Legs come standard with Toe Pads fitted, Roller Balls available upon request.

code K/R

Rectilinear desk

code K/120-2

120° Workstation 2 leg

code K/RR

90° Workstation

code K/BC-120

120° Bridged ClusterOnly available in bridged clustersNot for individual use

code K/RC

90° Workstation

code K/BC-90

90° Bridged ClusterOnly available in bridged clustersNot for individual use

code K/C

90° Workstation

code K/U

‘U’ configuration

code K/120

120° Workstation

Fixed height leg with stabilizing foot

Single stage height adjustable leg with stabilizing foot

Dual stage height adjustable leg with stabilizing foot

LEG STYLE OPTIONSFor all Krossi desks the maximum twin beam span between legs is 2400 mm. To extend further, a single leg fitted with 180° 2-way top casting is required for additional supportNB: Height adjustable single stage models shown, available in dual and fixed heights. Legs come standard with Toe Pads fitted, Roller Balls available upon request.

HEIGHT ADJUSTABLE RANGEFIXED HEIGHT RANGE

Sit stand - dual stageSit - single stage

900 mmmax

1200 mmmax

610 mmmin

610 mmmin

Long foot 700 mm Centre foot 580 mm Centre foot 700 mm Column leg 180 support legs with stabilizing foot Column 180 support leg

krossi _03

Desk Basesfixed height I technician height adjustment I mechanical height adjustment

code K/R-TA

K/R-MEC

code K/120-2TA

K/120-2MEC

code K/RR-TA

K/RR-MEC

code K/BC-120TA

K/BC-120MEC

code K/RC-TA

K/RC-MEC

Return column leg600 - 800 mm maximum return depth

code K/BC-90TA

K/BC-90MEC

code K/C-TA

K/C-MEC

Return centre foot750 mm minimum return depth

code K/U-TA

K/U-MEC

code K/120-TA

K/120-MEC

TECHNICIAN HEIGHT ADJUSTMENT - without HEX - TA(each leg adjusts individually with a tool)Standard adjustment range: Single Stage 610 mm - 900 mm Dual Stage 610 mm - 1200 mm

MECHANICAL HEIGHT ADJUSTMENT - MEC(each leg adjusts individually with a tool)Standard adjustment range: Single Stage 610 mm - 900 mm Dual Stage 610 mm - 1200 mm

FIXED HEIGHT - FXOverall height 720 mm inc. 25 mm thick worktop

code K/R-FX

code K/120-2FX

code K/RR-FX

code K/BC-120FX

code K/RC-FX


code K/BC-90FX

code K/C-FX

Return centre foot750mm minimum return depth

code K/U-FX code K/120-FX

krossi_04

Desk Basesuser height adjustable I technician height adjustment I electronic height adjustment

USER HEIGHT ADJUSTMENT - UA(single wind up handle) Standard adjustment range Single stage leg610 mm - 900 mm inc. 25 mm worktopStandard adjustment range Dual stage leg610 mm - 1200 mm inc. 25 mm worktop

TECHNICIAN HEIGHT ADJUSTMENT - with HEX - TA(all legs are connected - single adjustment point requiring tool - no handle) Standard adjustment range Single stage leg610 mm - 900 mm inc. 25 mm worktopStandard adjustment range Dual stage leg610 mm - 1200 mm inc. 25 mm worktop

code K/R-UA

K/R-TA

code K/120-2UA

K/120-2TA

code K/RR-UA

K/RR-TA

code K/BC-120UA

K/BC-120TA

code K/RC-UA

K/RC-TA


code K/BC-90UA

K/BC-90TA

code K/C-UA

K/C-TA

Return centre foot750 mm minimum return depth

code K/U-UA

K/U-TA

code K/120-UA

K/120-TA

code K/R-EA

code K/120-2EA

code K/RR-EA

code K/BC-120EA

code K/RC-EA


code K/BC-90EA

code K/C-EA

Return centre foot750mm minimum return depth

code K/U-EA code K/120-EA

ELECTRONIC HEIGHT ADJUSTMENT - EA(touch switch adjustment) Standard adjustment range single stage leg610 mm - 900 mm inc. 25 mm worktopStandard adjustment range dual stage leg610 mm - 1200 mm inc. 25 mm worktop

brideged_clustes3D.aibrideged_clustes3D.ai

krossi _05

When desks are abutted back to back, a connecting bridge completes the unique H-Leg frame. This design eliminates the need for supporting feet which results in less clutter beneath the desk and greater usable storage space, along with a clean open aesthetic.

Each desk in the cluster can either be fixed height or height adjustable, as each operates and adjusts independently. Height adjustable desks have options of technician, mechanical, user or electronic adjustment.

Legs come standard with toe pads fitted, roller balls available on request.

Bridge Clustersrectilinear desks I 90° workstations I 120° workstations

RECTILINEAR DESKSMaximum worktop size 2400 mm x 800 mmPossible overhangs shown for each width on page 13All desks are either fixed height or height adjustable and each desk is independently height adjustable in any mode

120° 3-WAY WORKSTATION (standard)Maximum one piece top size 1350 mm x 1350 mmPossible overhangs shown for each width on page 13

120° 3-WAY WORKSTATION (circular)Maximum one piece top size 1200 mm x 1200 mmPossible overhangs shown for each width on page 13

90° 4-WAY WORKSTATION (circular)Maximum one piece top size 1200 mm x 1200 mmPossible overhangs shown for each width on page 13

800 mm

480 mm

500 mm

450 mm

brideged_clustes3D.ai

brideged_clustes3D.ai

Toe PadRoller Ball

krossi _06

Bridge Clustersrectilinear desks I 90° workstations I 120° workstations I toe pads – roller balls

90° 2-WAY WORKSTATIONMaximum one piece top size 2400 mm x 1800 mmPossible overhangs shown for each width on page 13

90° 4-WAY WORKSTATIONMaximum one piece top size 2400 mm x 1800 mmPossible overhangs shown for each width on page 13

TOE PADS AND ROLLER BALLSToe pads come standard to all Krossi legs. Roller balls must be specifically requested.

krossi _07

Round Tablesfixed height

code KRS/TL2-10H (1000 mm)

Available with roller ball - Toe pads standard

code KRS/TL3-8 (800 mm)











KRS/TL1-13 (1350 mm)

KRS/TL1-15 (1500 mm)



KRS/TL2-10 (1000 mm)


Krossi Fixed Height Round Tables offers a choice of 4 different cast aluminium bases creating a diverse range of table sizes able to accommodate many applications.

Round Table Bases are of an all metal construction making them strong and durable. They come powdercoated in your choice of colour from the standard Schiavello powdercoat range.

Tops are available in laminate, powdercoat and veneer.

Legs come standard with Toe Pads fitted, Roller Balls available upon request to select models only, see below.

FIXED HEIGHT 6 STAR BASE1000 mm diameter base, 25 mm top thickness

FIXED HEIGHT 5 STAR BASE800 mm diameter



Height - 720 mm 1500 mm 1350 mm 1200 mm

Height - 720 mm Height - 1000 mm

1000 mm 900 mm

height - 720 mm Height - 1000 mm

800 mm750 mm650 mm

Height - 350 mm

Height - 350 mm height - 450 mm

450 mm350 mm

800 mm

1600 mm

900 mm

2000 mm

900 mm

1600 mm

900 mm

1800 mm

900 mm

2200 mm

900 mm

2600 mm

1300 mm

2400 mm

1300 mm

2700 mm

1300 mm

3000 mm

krossi _08

Rectilinear Meeting and Boardroom TablesT-Leg I column I 5 star double base I 5 star triple base

code KBT-16.9-TF

KBT-16.9-TL

KBT-16.9-TH

code KBT-18.9-TF

KBT-18.9-TL

KBT-18.9-TH

code KBT-24.13-CF

KBT-24.13-CL

KBT-24.13-CH

code KBT-20.9-TF

KBT-20.9-TL

KBT-20.9-TH

code KBT-27.13-CF

KBT-27.13-CL

KBT-27.13-CH

code KBT-22.9-TF

KBT-22.9-TL

KBT-22.9-TH

code KBT-30.13-CF

KBT-30.13-CL

KBT-30.13-CH

code KBT-24.9-TF

KBT-24.9-TL

KBT-24.9-TH

code KBT-26.9-TF

KBT-26.9-TL

KBT-26.9-TH

Rectilinear Meeting and Boardroom TablesKrossi rectilinear tables feature highly rigid cast and steel beam understructures. Table tops offer many variations for style and finishes as well as optional built-in power/data service outlets.

Krossi tables are available in a range of leg styles, T-Leg, Column, 5 Star and 6 Star. All legs are available in fixed height (F) and single stage height adjustable models; 535 - 720 mm (L) or 700 - 1050 (H).

T-LEG(shown 2400 mm x 900 mm)

COLUMN LEG(shown 2700 mm x 1300 mm)

Fixed height Height adjustable


720 mm535 - 720 mm / 700 - 1050 mm

720 mm535 - 720 mm / 700 - 1050 mm

BRIDGE COLUMN LEGS(shown 6000 mm x 1600 mm)

code KBT-60.16-BF

KBT-60.16-BL

KBT-60.16-BH

code KBT-48.16-BF

KBT-48.16-BL

KBT-48.16-BH

code KBT-54.16-BF

KBT-54.16-BL

KBT-54.16-BH

1600 mm

4800 mm

1600 mm

5400 mm

1600 mm

6000 mm


720 mm535 - 720 mm / 700 - 1050 mm

krossi _09

Desking Components – Legsfixed height – FX I user height adjustment – UA I electronic height adjustment – EA I mechanical height adjustment – MEC I technician height adjustment – TA

SINGLE STAGE HEIGHT ADJUSTABLE LEGSHeight range 610 mm - 900 mmnb: specify left or right hand

DUAL STAGE HEIGHT ADJUSTABLE LEGSHeight range 610 mm - 1200 mmnb: specify left or right hand

FIXED HEIGHT LEGSFixed height - 720 mmnb: specify left or right hand

code KRS/SS-LF-LEG-UA

KRS/SS-LF-LEG-TA

KRS/SS-LF-LEG-EA

KRS/SS-LF-LEG-MEC

Left end and right end leg with long foot 700 mm

code KRS/SS-SF-MID-LEG-UA

KRS/SS-SF-MID-LEG-TA

KRS/SS-SF-MID-LEG-EA

KRS/SS-SF-MID-LEG-MEC

Left end and right end leg with short foot 580 mm

code KRS/SS-LF-MID-LEG-UA

KRS/SS-LF-MID-LEG-TA

KRS/SS-LF-MID-LEG-EA

KRS/SS-LF-MID-LEG-MEC

Left end and right end leg with centre foot 700 mm

code KRS/SS-C-LEG-UA

KRS/SS-C-LEG-TA

KRS/SS-C-LEG-EA

KRS/SS-C-LEG-MEC

Left end and right end column leg

code KRS/SS-C-LEG-180-UA

KRS/SS-C-LEG-180-TA

KRS/SS-C-LEG-180-EA

KRS/SS-C-LEG-180-MEC


code KRS/DS-LF-LEG-UA

KRS/DS-LF-LEG-TA

KRS/DS-LF-LEG-EA

KRS/DS-LF-LEG-MEC


code KRS/DS-SF-MID-LEG-UA

KRS/DS-SF-MID-LEG-TA

KRS/DS-SF-MID-LEG-EA

KRS/DS-SF-MID-LEG-MEC


code KRS/DS-LF-MID-LEG-UA

KRS/DS-LF-MID-LEG-TA

KRS/DS-LF-MID-LEG-EA

KRS/DS-LF-MID-LEG-MEC


code KRS/DS-C-LEG-UA

KRS/DS-C-LEG-TA

KRS/DS-C-LEG-EA

KRS/DS-C-LEG-MEC


code KRS/DS-C-LEG-180-UA

KRS/DS-C-LEG-180-TA

KRS/DS-C-LEG-180-EA

KRS/DS-C-LEG-180-MEC


code KRS/LF-LEG-FX-LH

KRS/LF-LEG-FX-RH


code KRS/SF-MID-LEG-FX-LH

KRS/SF-MID-LEG-FX-RH


code KRS/LF-MID-LEG-FX-LH

KRS/LF-MID-LEG-FX-RH


code KRS/C-LEG-FX-LH

KRS/C-LEG-FX-RH


code KRS/C-LEG-180-FX-LH

KRS/C-LEG-180-FX-RH


krossi _10

Desking Components – Legs fixed height – FX I user height adjustment – UA I electronic height adjustment – EA I mechanical height adjustment – MEC I technician height adjustment – TA

KROSSI DESK LEGSHeight adjustable - single - 610 mm - 900 mmnb: specify left or right hand

KROSSI DESK LEGSHeight adjustable - dual - 610 mm - 1200 mmnb: specify left or right hand

KROSSI DESK LEGSFixed height - 720 mmnb: specify left or right hand

code KRS/SS-LF-180-LEG-UA

KRS/SS-LF-180-LEG-TA

KRS/SS-LF-180-LEG-EA

KRS/SS-LF-180-LEG-MEC

Mid leg with long foot 700 mm

code KRS/SS-SF-180-LEG-UA

KRS/SS-SF-180-LEG-TA

KRS/SS-SF-180-LEG-EA

KRS/SS-SF-180-LEG-MEC

Mid leg with short centre foot 580 mm

code KRS/SS-LEG-90-UA

KRS/SS-LEG-90-TA

KRS/SS-LEG-90-EA

KRS/SS-LEG-90-MEC

Column leg 90°

code KRS/SS-LEG-120-UA

KRS/SS-LEG-120-TA

KRS/SS-LEG-120-EA

KRS/SS-LEG-120-MEC

Column leg 120°

code KRS/DS-LF-180-LEG-UA

KRS/DS-LF-180-LEG-TA

KRS/DS-LF-180-LEG-EA

KRS/DS-LF-180-LEG-MEC


code KRS/DS-SF-180-LEG-UA

KRS/DS-SF-180-LEG-TA

KRS/DS-SF-180-LEG-EA

KRS/DS-SF-180-LEG-MEC


code KRS/DS-LEG-90-UA

KRS/DS-LEG-90-TA

KRS/DS-LEG-90-EA

KRS/DS-LEG-90-MEC

Column leg 90°

code KRS/DS-LEG-120-UA

KRS/DS-LEG-120-TA

KRS/DS-LEG-120-EA

KRS/DS-LEG-120-MEC

Column leg 120°

code KRS/LF-180-LEG-FX


code KRS/SF-180-LEG-FX


code KRS/ LEG-90-FX

Column leg 90°

code KRS/ LEG-120-FX

Column leg 120°

krossi _11

Standard worktops can be specified 25 mm or 33 mm thick with square or soft rounded corners (50 mm radius). Available finishes include selected laminates and timber veneers in a range of colours. Custom edge profiles and finishes are also available upon request, offering vast design possibilities.

STANDARD WORKTOPS

CORNER FINISH OPTIONS EDGE OPTIONS

Worktopsstandard worktops I corner finish options I worktop overhangs

WORKTOP OVERHANGSDesk legs can be positioned to allow a worktop end overhang. This creates a clear space below for placement of a pedestal or other large items. The maximum length of overhang possible for each size desk is illustrated below.

Rectilinear

1650 mm

2400 mm 1650 mm

1800 mm

1350 mm

1800 mm 1350 mm

800 mm750 mm

800 mm750 mm

800 mm750 mm

800 mm750 mm

600 mm

2400 mm

1800 mm

1200 mm

1500 mm

2100 mm 1500 mm

1200 mm

1500 mm

800 mm

1800 mm 1650 mm 1650 mmmax 300 mm max 250 mm max 200 mm

1800 mm 1800 mm 1800 mm

25 mm 25 mm

33 mm 33 mm17 mm

12 mm

1200 mm

2100 mm

90° 120°

Rectilinear Desk Return

Square corners 50 mm radius to front corners 50 mm radius corners to all corners Square Sharknose

krossi _12

System 18system 18 privacy panel I system 18 upstand

System 18 panels with powdercoated aluminium transom profile, and solid decorative faces. Available in a range of finishes including, laminate, powdercoat and veneer. Both System 18 privacy panels and System 18 upstands attach to the worktop and move with desk height adjustment.

code K/SB

Supplied in pairs

code K/SU

Top requires machining in the factory

SYSTEM 18 PRIVACY PANEL18 mm laminate panel with top transom rail. Transom rail suitable for Schiavello accessories. Not to be used with shelves. Standard height 600 mm, maximum length 2400 mm.

SYSTEM 18 – SCREEN UPSTAND300 mm high laminate upstand with top transom rail. Transom rail suitable for Schiavello accessories, not suitable for shelving. Maximum length 2400 mm.

powdercoated bracketsrecessed flush

powdercoated screen bracket

powdercoated cover cap

powdercoatedcover cap

threaded guiderod comes fitted

System 18

System 18

pre-machined

pre-machined

600 mm

300 mm

25 mm worktop

25 mm worktop25 mm worktop

screws

screw

krossi _13

Cable Reticulationcable trays I segregated powdercoated I powdercoated steel I bridge specification

CABLE TRAYS (optional)Krossi desking offers optional cable trays that can mount off a single desk or between bridges. Cables can enter trays from power poles, power blades, umbilicals, wall or floor connections. Bridges needs to be specified as thru or end along with the cable tray type being used.

CABLE TRAYS - SEGREGATED POWDERCOATEDLettric power and data modules clip into the top of the 2-channel segregated cable tray. Maximum length 3000 mm.

CABLE TRAYS - BRIDGE SPECIFICATIONCable trays can run between or thru bridges. All bridges must specify either an end or a thru configuration and the tray type being used. An end bridge will be punched out one side, a thru bridge is punched both sides.

70 mm

lettric face mounted power module

lettric datamodule

125 mm

CABLE TRAYS - POWDERCOATED STEELLettric power and data modules are mounted via a punchout to the front, 70 mm, face of the tray.Standard punching is to the centre of the tray, offset punching available upon request.Maximum length 3000 mm.

Double Trayno punchout

Double Tray2 sided punchout

Single Trayno punchout

Single Tray1 sided punchout

Single Tray

70 mm 70 mm

125 mm 200 mm

Double Tray Single Tray with Lettric Face Mounted Power Module

Segregated Tray

end bridge

end bridge

end bridgepass thru bridge

pass thru bridgepass thru bridge

Segregated Tray Segregated Tray with Lettric Power Module

krossi _14

Cable Reticulationpower blades I power poles I umbilicals I inline vertical duct

Cable routing – E45E45 ducted panels offer a number of cable routing options that complement Krossi desking. They can be combined to satisfy specific requirements while always providing easy access and efficient cable management throughout entire layouts. Cables can be routed to panels from ceiling, walls or floors by utilising umbilicals, power blades, power poles or the inline duct.

POWER BLADESAccess from ceiling or floor. Lengths to order. Range of colours.Please specify cabling requirements.

UMBILICALThe umbilical feeds cabling to the cable tray from ceilings or floors.Specify required length and color.

UMBILICALS / TECHNOLOGY COLUMN120 degree Lettric Technology Column with umbilical above. Column is available in standard powdercoat finish. Please see the Lettric Technology Column technical manual for full details of sizing and outlet configurations.

INLINE VERTICAL DUCTDirect access via removable duct cover.Power and data cabling can be accessed via ceilings, floors and skirtings.Service outlets visible, mounted to duct face.Please specify cabling requirements, adjoining panels and ceiling heights.

300 mm or600 mm wide

floor to ceiling

cable tray

height as required umbilical

cable tray

height as required umbilical

technologycolumn

technology column

height as required

power / data outlets

specify cabling requirements and adjoining panel heights

Removable Duct Cover

200 mm

45 mm

panels attach with standard wallstarter

cables exit powerblade and enter cable tray

cables exit power blade through access holes

ABOVE DESK SERVICE MODULE

ADM-2P-0D ADM-2P-1DADM-2P-2D


ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D

BELOW DESK SERVICE MODULE

IN-DESK SERVICE MODULEIDM-2P-0D (2 GPO)

IDM-2P-1D (2 GPO + 1 DATA)ISM-2P-2D (2 GPO + 2 DATA)

IDM-4P-0D (4 GPO)

IDM-4P-1D (4 GPO + 1 DATA)IDM-4P-2D (4 GPO + 2 DATA)



BDM-2P-0D (2 GPO)

BDM-2P-1D (2 GPO + 1 DATA)BSM-2P-2D (2 GPO + 2 DATA)

BDM-4P-0D (4 GPO)

BDM-4P-1D (4 GPO + 1 DATA)BDM-4P-2D (4 GPO + 2 DATA)



LEC-EX LEC-EX-AS LEC-EX-AS-CCLEC-EX-CC

LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL

LEC-BL LEC-D1 LEC-D2

LEC-??

LEC-??

LEC-??

Cable clips - Not included

LEC-CCLEC-??LEC-??-CC

LEC-PM2 LEC-PM2R LEC-PM2-FM LEC-PM2R-FM


OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D

krossi _15

Lettric Soft-wiring Systemconnectors I tiles I power modules

Lettric Soft-wiring SystemSchiavello soft wiring system delivers power and lighting to workstations. The system is easily connected, disconnected or relocated without the need to isolate power and with minimal inconvenience. All connections within systems are protected by a positive lock mechanism to prevent accidental power disconnection.

There are numerous outlet combinations available for each option. Refer to Schiavello Lettric softwiring catalogue for complete product information and technical specification.

SOFT WIRING CONNECTORSPlease see Lettric Softwiring Catalogue for a comprehensive list of products

TILESPlease see Lettric Softwiring Catalogue for a comprehensive list of products

POWER MODULESPlease see Lettric Softwiring Catalogue for a comprehensive list of products

code LEC-EX

code LEC-SS

code LEC-BL

code LEC-PM2

code LEC-PM4

code LEC-EX-AS

code LEC-TP

code LEC-D1

code LEC-PM2R

code LEC-PM4R

code LEC-EX-CC

code LEC-JB

code LEC-D2

code LEC-PM2-FM

code LEC-PM4-FM

code LEC-EX-AS-CC

code LEC-JB

code LEC-BL-DBL

code LEC-PM2R-FM

code LEC-PM4R-FM

code LEC-D2-AF




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D




ADM-2P-3DADM-2P-4D

ADM-4P-3DADM-4P-4D




IDM-4P-0D (4 GPO)




BDM-2P-0D (2 GPO)


BDM-4P-0D (4 GPO)





LEC-TPLEC-JBLEC-SS

LEC-D2-AFLEC-BL-DBL


LEC-??

LEC-??

LEC-??





OHM-2P-0DOHM-2P-4D

krossi _16

IN-DESK SERVICE MODULEPlease see Lettric Softwiring Catalogue for a comprehensive list of products

BELOW DESK SERVICE MODULEPlease see Lettric Softwiring Catalogue for a comprehensive list of products

ABOVE DESK SERVICE MODULEPlease see Lettric Softwiring Catalogue for a comprehensive list of products

OUTLET HOUSING MODULEPlease see Lettric Softwiring Catalogue for a comprehensive list of products

Lettric Soft-wiring Systemin-desk service module I below desk service module I above desk service module I outlet housing module

code IDM-2P-OD (2 GPO)

IDM-4P-OD (4 GPO)

IDM-2P-4D (2 GPO + 4 DATA)

IDM-4P-4D (4 GPO + 4 DATA)

code BDM-2P-OD (2 GPO)

BDM-4P-OD (4 GPO)

BDM-2P-4D (2 GPO + 4 DATA)

BDM-4P-4D (4 GPO + 4 DATA)

code ADM-2P-OD (2 GPO)

ADM-2P-2D (2 GPO + 2 DATA)

ADM-4P-0D (4 GPO)




code OHM-2P-OD (2 GPO)

OHM-2P-2D (2 GPO + 2 DATA)

Product Specificationsgeneral I height adjustable I cable reticulation I divisional screens I finishes I worktops I sustainable I warranty

GeneralKrossi is a fully refined office desking and table system manufactured in Australia by Schiavello.The system is modular, beam based with a broad range of applications.These include:• Ergonomic rectilinear office desking and workstations available in both conventional and

bridged clusters• Executive desking• Conference and boardroom tables

All items are available as either fixed height or height adjustable with adjustmentoptions to suit just sit as well as sit and stand applications.Tested for strength, durability, stability, function and ergonomics conforming to:Australian Standard AS/NZ 4442:1997 “Office desks”.

Height adjustableKrossi is available in a number of height adjustable options that can be infinitely varied within the particular adjustment range. These options are: • Technician adjustable - easy individual leg adjustment• User adjustable - via an easy winder mechanism• Electronically adjustable - power adjustment for multi user requirements, facilitating

quick changes and sit and stand applicationsStandard height adjustment range: 610 mm to 900 mmSit and stand height adjustment range: 610 mm to 1200 mm

Cable reticulationThe system includes optional clip-on segregated cable reticulation trays and a selection of service outlet modules and soft wiring connections.Also included are integrated components that provide efficient means of routing services cabling to the cable trays from the ceiling, walls or floor, for example, power blades, umbilicals and power poles.The softwiring electrical system is Schiavello Lettric, certified to Australian Standard AS/NZS 3131.

Divisional screensKrossi is compatible with Schiavello System 30, System 45, System 70 and E45divisional screens and includes a complete range of panel attaching brackets suitable for both floor standing and desk suspended panels.

FinishesAll aluminium is powder coated to Australian Standard AS 3715-2002 in a range of standard or custom colours.All metal components are powder coated to Australian standard AS4506 2005 in a range of standard or custom colours.

WorktopsStandard worktops can be specified 25 mm or 33 mm thick with square or soft rounded corners (50 mm radius). Available finishes include selected laminates, timber veneers and powder coated MDF in a range of standard or custom colours. Custom edge profiles and finishes are also available upon request, offering vast design possibilities.

SustainableKrossi is manufactured in accordance with international environmental standards: ISO 14001. All components are either reusable or recyclable. Krossi is Greentag certified by Ecospecifier to levels A, B and C.

WarrantyKrossi is covered by a minimum five year warranty against faulty materials and workmanship. This includes a guarantee to all standard parts, components and service for a period of no less than 10 years from date of installation.

schiavello.com/krossiSCH/TKRO01-A

Schiavello Group Pty Ltd reserves the right to change any or all details without prior notice. All dimensions stated within this document are nominal and/or approximate only and subject to variation.

Melbourne Head OfficeSchiavello (Vic) Pty Ltd1 Sharps RoadTullamarine VIC Australia 3043T: 61) 3 9330 8888F: 61) 3 9330 8899

Melbourne ShowroomSchiavello (Vic) Pty LtdMetropol8 Whiteman StreetSouthbank VIC Australia 3006T: 61) 3 9674 1500F: 61) 3 9674 1650

AdelaideSchiavello (SA) Pty LtdGround Floor, 101 Currie StreetAdelaide SA Australia 5000T: 08) 8112 2300F: 08) 8231 1419

BrisbaneSchiavello (Qld) Pty Ltd265 Coronation DriveMilton QLD Australia 4064T: 07) 3368 3388F: 07) 387602130

CanberraSchiavello (ACT) Pty Ltd2-6 Collie StreetFyshwick ACT Australia 2609T: 02) 6124 0500F: 02) 6280 4370

PerthSchiavello (WA) Pty Ltd1315 Hay StreetWest Perth WA Australia 6005T: 08) 9420 6588 F: 08) 9322 1337

SydneySchiavello (NSW) Pty Ltd69 Campbell StreetSurry Hills NSW Australia 2010T: 02) 9211 3311F: 02) 9212 3788

SingaporeSchiavello Singapore Pte LtdNo.1 Magazine Road#01-05 Central MallSingapore 059567T: 65) 6533 8011F: 65) 6533 2811

Krossi - Schiavello Group · Desk Bases fixed height range I height adjustable range I leg style...

Documents

Transcript of Krossi - Schiavello Group · Desk Bases fixed height range I height adjustable range I leg style...