Kongskilde Vibro Till 2800 - hanki-ker.hu · Vibro Till 2800 • Optional types of levelling and...

13
Vibro Till 2800 V Vibro Till 2800 serie

Transcript of Kongskilde Vibro Till 2800 - hanki-ker.hu · Vibro Till 2800 • Optional types of levelling and...

Page 1: Kongskilde Vibro Till 2800 - hanki-ker.hu · Vibro Till 2800 • Optional types of levelling and finishing attacments • The attacments are split-up in narrow sections, to work independently

Vibro Till 2800

VVibro Till 2800 serie

Page 2: Kongskilde Vibro Till 2800 - hanki-ker.hu · Vibro Till 2800 • Optional types of levelling and finishing attacments • The attacments are split-up in narrow sections, to work independently

Vibro Till 2800

Introduction• From stubble to seedbed in 1 pass

• Vibrating S-tines

• Pulled type cultivators

• Working width from 4 to 8 m

• Heavy duty box section frame

• VTH tines

• 5 rows of tines

• Tine spacing for stubble cultivation: 16 cm

• Transport width : 3.0 m

• Optional types of levelling and finishing attachments

• Power demand : 3.5 - 4.5 hp/tineVTH tine w/o share

Page 3: Kongskilde Vibro Till 2800 - hanki-ker.hu · Vibro Till 2800 • Optional types of levelling and finishing attacments • The attacments are split-up in narrow sections, to work independently

Vibro Till 2800

Cultivator frame

• Heavy duty tubular frame

• Modular built up

• Commen centre frame

• Various side wing widths

Page 4: Kongskilde Vibro Till 2800 - hanki-ker.hu · Vibro Till 2800 • Optional types of levelling and finishing attacments • The attacments are split-up in narrow sections, to work independently

Vibro Till 2800

Frame clearance

• 60 cm underframe clearance

• 5 to 6 rows of tines

• Frame depth : 3.3 m

• Standard tine spacing : 16 cm

• Tine diagrams available for : 8, 10 and 14 cm

Page 5: Kongskilde Vibro Till 2800 - hanki-ker.hu · Vibro Till 2800 • Optional types of levelling and finishing attacments • The attacments are split-up in narrow sections, to work independently

Vibro Till 2800

Tines

• Standard VTH (16.3 mm )

• Spring from convex material

• Optional : VTH-L tine ( 13.3 mm)

Page 6: Kongskilde Vibro Till 2800 - hanki-ker.hu · Vibro Till 2800 • Optional types of levelling and finishing attacments • The attacments are split-up in narrow sections, to work independently

Vibro Till 2800

Wearing parts

Goosefoot Share

7 cm heavy duty share4” Sweep

4” (10 cm) heavy duty shareor standard share

7”Sweep

7” (18.5 cm) heavy dutyshare or standard share

Page 7: Kongskilde Vibro Till 2800 - hanki-ker.hu · Vibro Till 2800 • Optional types of levelling and finishing attacments • The attacments are split-up in narrow sections, to work independently

Vibro Till 2800

• The long drawbar makes turning easy

• The self levelling hitch ensures horizontal lifting of machine

Drawbar

Page 8: Kongskilde Vibro Till 2800 - hanki-ker.hu · Vibro Till 2800 • Optional types of levelling and finishing attacments • The attacments are split-up in narrow sections, to work independently

Vibro Till 2800

• The large walking tandem wheels ensurean even working depth in uneven conditions

• The largest models have support wheels for the side sections. This stabilises the working depth

• The working depth is set on one central position

Depth control

Page 9: Kongskilde Vibro Till 2800 - hanki-ker.hu · Vibro Till 2800 • Optional types of levelling and finishing attacments • The attacments are split-up in narrow sections, to work independently

Vibro Till 2800

Hydraulic system

• The powerfull hydraulic system ensuresstable lifting and lowering of the centre frame and the side wings

• The serial connected cylindres ensure even working depth on central and side wings

• The hydraulic system is ”zero set” at every full lift up

• For lifting the frame a double acting centrally placed hydraulic cylinder is used

Page 10: Kongskilde Vibro Till 2800 - hanki-ker.hu · Vibro Till 2800 • Optional types of levelling and finishing attacments • The attacments are split-up in narrow sections, to work independently

Vibro Till 2800

• Optional types of levelling and finishing attacments

• The attacments are split-up in narrow sections, to work independently and follow the soil surface

Double S-rollerFS Combi harrow

5-bar drag harrow Spike leveller

Rear attachments

LTS rear harrow

Page 11: Kongskilde Vibro Till 2800 - hanki-ker.hu · Vibro Till 2800 • Optional types of levelling and finishing attacments • The attacments are split-up in narrow sections, to work independently

Vibro Till 2800

• S-type rollers are multi functional

Double S-rollerFS Combi harrow

Rear attachments

”Agressive” ”Compaction”

Page 12: Kongskilde Vibro Till 2800 - hanki-ker.hu · Vibro Till 2800 • Optional types of levelling and finishing attacments • The attacments are split-up in narrow sections, to work independently

Vibro Till 2800

Transport

• Transport width : 3m

• Folding / unfolding with double actingcylinder

• Manual transport lock

Transport width 2996 mm.

Page 13: Kongskilde Vibro Till 2800 - hanki-ker.hu · Vibro Till 2800 • Optional types of levelling and finishing attacments • The attacments are split-up in narrow sections, to work independently

Vibro Till 2800

Optional equipment • Brakes

• Light equipment

Tractor requirement• Two double acting valves

• Power requirement depending on soil contidions

Average in Europe:

4 m = 85-100 Hp

5 m = 105-140 Hp

6 m = 135-175 Hp

7 m = 140-180 Hp

8 m = 180-230 Hp