![USER‘S GUIDE - epluse.com · 2018. 8. 2. · FLOAT (read register): Function code / 2) Register number1) [Dec] Register address [HEX] Parameter name 31003 0x03EA Temperature34002](https://static.fdocuments.net/doc/165x107/61490e7a9241b00fbd675003/useras-guide-2018-8-2-float-read-register-function-code-2-register.jpg)
konfigurationsaenderung e 11 - epluse.com
1
When changing the product configuration, the original labels on the device and on the packaging do not match any longer the device setup. In order to avoid later confusion and mistakes, the new configuration shall be made clearly visible by using the self adhesive configuration labels included in the scope of supply. INFORMATION +43 7235 605 0 / [email protected] Langwiesen 7 • A-4209 Engerwitzdorf Tel: +43 7235 605-0 • Fax: +43 7235 605-8 [email protected] • www.epluse.com LG Linz Fn 165761 t • UID-Nr. ATU44043101 Place of Jurisdiction: A-4020 Linz • DVR0962759 Konfigurationsaenderung_e // v1.1 // Modification rights reserved The labels are located on the interior side of the packaging. 1. Write on the label the differences from the original setup. 2. Peel off the configuration label and fix it onto side of the enclosure, preferably onto the part containing the electronics. The original label shall remain visible. 3. In case the device remains on stock after the setup change, use the second label for the packaging. The original label shall remain visible. USER‘S GUIDE Relabeling in case of product configuration change
Transcript of konfigurationsaenderung e 11 - epluse.com
When changing the product configuration, the original labels on the device and on the packaging do not match any longer the device setup. In order to avoid later confusion and mistakes, the new configuration shall be made clearly visible by using the self adhesive configuration labels included in the scope of supply.
INFORMATION +43 7235 605 0 / [email protected] 7 • A-4209 EngerwitzdorfTel: +43 7235 605-0 • Fax: +43 7235 [email protected] • www.epluse.com
LG Linz Fn 165761 t • UID-Nr. ATU44043101Place of Jurisdiction: A-4020 Linz • DVR0962759
Konfi gurationsaenderung_e // v1.1 // Modifi cation rights reserved
The labels are located on the interior side of the packaging.
1. Write on the label the differences from the original setup.
2. Peel off the configuration label and fix it onto side of the enclosure, preferably onto the part containing the electronics. The original label shall remain visible.
3. In case the device remains on stock after the setup change, use the second label for the packaging. The original label shall remain visible.
USER‘S GUIDERelabeling in case of product confi guration change
