KMW Communications Base Station Antennas For...

KMW Communications

Base Station Antennas

For Mobile Communications

www.kmwcomm.com

KMW Inc. (Korea) KMW Communications (USA) KMW Japan Inc. Xi’an Huatian Telecom Inc. China

65 Youngchun‐ri, Dongtan‐myun, Hwasung‐si, Kyungki‐do, 445‐813 Republic of Korea, 445‐813 +82 10 370 8600 [email protected] http://www.kmw.co.kr

1521 E. Orangethorpe Ave. Suite A Fullerton. CA 92831 United States of America +1 714 515 1100 [email protected] http://www.kmwcomm.com

I’s Bid 7F, Shinyokohama 3‐18‐5, Kouhoku, Yokohama‐si, Kanagawa‐ken, Japan (222‐0033) +81 45 478 2202 [email protected] http://www.kmwcomm.com

No. 38 South Tuanjie Road Hi‐Tech Zone of Xi’an Xi’an city, Shaanxi Province P.R China +86 29 8838 4888 [email protected] http://htctelecom.com

KMW Communications



www.kmwcomm.com

KMW Inc. has consistently invested 30% of total revenue in R&D. Our outstanding Engineers who are dedicated to R&D will seek creative Solutions to RF & Air Interface Products. With the upmost achieved RF patents, KMW will continue to support our superior products to our

KMW Inc. delivers innovative and core RF technology and products. As we constantly produce new technology and pursue perfection, KMW Inc. will continue to build a reputation as a global leading company that offers the best solution for the wireless infrastructure market.

KMW Inc. will insure customer satisfaction and high reliability by maintaining quality control throughout the design and manufacturing process to surpass customer expectations.

KMW Inc. is very proud to be regarded as an outstanding company for providing Proactive & Dynamic manner throughout the world. Our ability to create and innovate, we aggressively accept the challenges of future technology and competitors.

R&D Oriented Global Leader

Customer Satisfaction Proactive Manner

AISG Broad Band

Antenna Tower Mounted

Amplifier Power Distribution

Unit

Band Rejection

Filter Multi Step Combiner

Cross Band Coupler

In‐Band Combiner

CAMS

Controller

KMW Communications



www.kmwcomm.com

KMW Communications Introduction Antenna Products AISG High Broad Band Antenna EDTA(Electrical Down Tilt) Antenna Dual Phase® Antenna Fixed Antenna AISG Dual Broad Band Antenna EDTA Antenna AISG Low Broad Band Antenna EDTA Antenna WiMAX Antenna EDTA Antenna Dual Phase® Antenna

TMA Products Tower Mounted Amplifiers Power Distribution Unit

Filter Band Rejection Filter: Triple Mode Filter (Black Hole Filter) Multi Step Combiner: Spectrum Migration (Big Bang) In Band Combiner Dual Band Combiner Cross Band Coupler Cross Band Coupler with Sniffer Port Cross Band Coupler with Sniffer & AISG Port

CAMS (Central Antenna Management System) Accessories Bias‐T Controller PAC‐I (Portable Antenna Controller) PAC‐A (Portable Antenna Controller) AICM (Air Interface Control Master) TICU (Tower Interface Control Unit) Bracket Cables

KMW Table of Product Contents

KMW Communications



www.kmwcomm.com

About KMW KMW‐Simply Intelligent®

KMW has and continues to introduce the industry’s leading RF products. KMW‐Simply Intelligent® antenna, TMA, CBC, and RF components has a proven track record in manufacturing RF products for OEM and wireless operators since 1991.

Our “Research and Development” departments are located in Asia and United States with manufacturing facilities in Korea and China. KMW is ISO certified and has over 200 RF patents and trademarks such as “Dual Phase™” antenna.

OUR VISION

• Providing best solutions for the wireless industry • Maintain strategic leadership in technology, quality, and cost • Work together with people, friends, and family globally to share happiness and greater values

OUR MISSION

• RF Convergence ‐ provide most cost effective RF solutions by optimizing all resources • Better call quality and less maintenance ‐ Increase capacity and decrease CAPEX/OPEX • Create best values for customers, shareholders, and employees

KMW‐Simply Intelligent® is a development philosophy for our global product portfolio. We are the industry’s leader in deployment of advance antenna systems. We take pride in responding to customer’s RF requirements with rapid design cycles, short manufacturing ramp up times and best in class delivery time.

KMW‐Simply Intelligent® has a longstanding history of providing quality RF products to the global OEM world and the wireless operators. KMW manufactures full range of 3G/4G products.

KMW Communications



www.kmwcomm.com

KMW‐Simply Intelligent® antenna portfolio systems utilize advanced phase shifter and radiation techniques. Our

patented Dual Band™ and hybrid antennas provide reliable, cost effective, remote “Tilt and Steering” capabilities

that enables significant savings, virtually eliminating the need for tower crews.

Antennas KMW Antenna Products

Category Tilt Part Number Pol. BW Gain (dBi) Dimension (inch)

AISG

High Broad Band (1710 ~2170MHz)

Dual Phase® (Electrical Downtilt + Azimuth Steering)

HB‐X‐AW‐17‐65‐00T‐RET X 65 17 Φ6.2×48

HB‐X‐AW‐19‐65‐00T‐RET X 65 19 Φ6.2×72

Outdoor DAS

HB‐X‐AW‐16‐90‐00T‐RET X 90 16 Φ6.2×48 HB‐X‐AW‐18‐45‐00T‐RET X 45 18 Φ10.08×48 HB‐X‐AW‐19‐33‐00T‐RET X 33 19 Φ10.08×48 HB‐X‐AW‐23‐33‐00T‐RET X 33 23 Φ10.08×83.9 DA‐X‐AW‐13‐65‐02T X 65 12.7 Φ8.11×24 DA‐X‐AW‐14‐65‐02T3 X 65 13.5 Φ8.11×24

Fixed FX‐X‐CD‐16‐65‐00T X 65 16 12.6×7.87×54 FX‐X‐CD‐18‐65‐00T X 65 18 12.6×7.87×54

AISG

Dual Broad Band (698~896MHz, 1710~2170MHz)

EDTA (Electrical Downtilt)

AM‐X‐CD‐16‐65‐00T‐RET X 65 16 12.6×7.87×54 AM‐X‐CD‐15‐65‐00T‐RET X 65 15 11.8×6.0×48

EDTA

(Electrical Downtilt)

AM‐X‐CD‐15‐90‐00T‐RET X 90 15 11.8×6.0×48 AM‐X‐CD‐17‐65‐00T‐RET X 65 17 11.8×6.0×72 AM‐X‐CD‐17‐90‐00T‐RET X 90 17 11.8×6.0×72 AM‐X‐CD‐18‐65‐00T‐RET X 65 18 11.8×6.0×96 AM‐X‐CD‐18‐90‐00T‐RET X 90 18 11.8×6.0×96 AM‐X‐CW‐13‐90‐00T‐RET X 90 13 11.8×6.0×48 AM‐X‐CW‐14‐65‐00T‐RET X 65 14 11.8×6.0×48

AISG Low Broadband (698‐896MHz)

EDTA

(Electrical Downtilt)

AM‐X‐CW‐14‐90‐00T‐RET X 90 14 11.8×6.0×72 AM‐X‐CW‐15‐65‐00T‐RET X 65 15 11.8×6.0×72 AM‐X‐CW‐16‐90‐00T‐RET X 90 16 11.8×6.0×96 AM‐X‐CW‐17‐65‐00T‐RET X 65 17 11.8×6.0×96 AM‐V‐CW‐14‐65‐00T V 65 14 12.6×5.9×54 AM‐X‐WM‐17‐65‐00T X 65 17 6.54×2.6×48.00

AM‐X‐WM‐17‐65‐00T‐FP X 65 17 6.54×2.6×48.00

WiMAX (2496~2690MHz)

Dual Phase

(Electrical Downtilt + Azimuth Steering)

AQ‐X‐WM‐18‐65‐00T‐RET X 65 18 10×3.54×48 HB‐X‐WM‐17‐65‐00T X 65 17 7.32×48.00

HB‐X‐WM‐14‐65‐00T X 65 14 Φ7.32×24.00

AQ‐X‐WM‐18‐65‐00T‐RET X 65 18 10X3.54X48 AQ‐X‐WM‐16‐90‐00T‐RET X 90 16 Ф10.0×3.54x48 HQ‐X‐WM‐17‐65‐00T‐RET X 65 17.5 Φ10.0×48 HQ‐X‐WM‐16‐90‐00T‐RET X 90 16 Φ10.0×48

KMW Communications



www.kmwcomm.com

1. Dual Phase™ Technology In recent years antennas began to enter the market with remote adjustable tilt function which made some network optimization situations easier and considerably less expensive. KMW anticipated the need to make the Azimuth beam remotely adjustable as well as the Down‐Tilt. Since the remote adjustability of the Tilt angle had been known as “Single‐Phase, Adjustable,” referring to Remote Tilt and Azimuth adjustability as “Dual Phase™” seemed only natural. Since then Dual‐Phase™ antennas have saved carriers Hundreds of Thousands of dollars in CAPEX, due to the cost savings experienced in spite of the additional features, and OPEX experienced because of the savings realized when a KMW antenna needed to be adjusted for network optimization, but the need to call a tower crew to make the adjustments was not necessary.

2. KMW Single RET KMW’s Dual‐Band antennas feature independent control of Electrical Down‐Tilt for each frequency band in the antenna. While other antennas may require Two‐Independent RET (Remote Electrical Tilt) module functions for independent control of each band, the KMW Dual‐Band antennas allow independent control of both bands through a single innovative RET Module.

3. KMW High / Low Broad Band Antenna

With the recent acquisition of additional frequency bandwidth in the “700 MHz band” by carriers, KMW recognized the need to replace existing AWS and PCS‐only antennas with “Dual‐Band” antennas in order to take advantage of the newly allocated frequencies without having to acquire additional Cell‐Sites and fight additional zoning restrictions. The product offering listed here is yet another example of KMW’s ability to anticipate and meet the needs of the carriers.

4. WiMAX / LTE Antenna KMW’s WiMAX / LTE product line reflects our ability to address diverse product requirements that meets and exceeds customer’s requirements. The WiMAX / LTE products were developed to meet the stringent requirements the budding 4G Network push. The antennas and their peripherals are suitable for many WiMAX and LTE (Long Term Evolution) data and voice applications

Antennas KMW Antenna System Summary

KMW Communications



www.kmwcomm.com

KMW provides High Performance Tower Mounted Amplifiers (TMA) that utilize filter technology to provide very low loss and low noise figure. Our single/ twin and dual wide band TMA operates seamlessly with our D.C. pulse antenna control scheme. Product Category Part Number Description

TMA

AWS Twin TMA KUNAPC101000 1710~1755MHz (45MHz)/ 2110~2155MHz (45MHz) PCS TMA KUNATC1030010 1850~1910MHz (60MHz) / 1930~1990MHz (60MHz)

AWS Twin TMA (Broad Band)

KUNAPA103001 1710~1770MHz / 2110~2170MHz

Dual Band‐AWS Twin with Dual 700

Bypass

KUNAPA1050010 698~746MHz / 2110~2170MHz

Dual Band TMA KUNAPA102001 698~716MHz / 728~746MHz / 1710~1770MHz / 2110~2170MHz Dual Band 700

Bypass KUNAPA101001 698~746MHz / 2110~2170MHz / 1710~1770MHz

Sing Band 700MHz KUNAPA1040010 698~716MHz/ 728~746MHz Wide Band TMA KUNAPS2020000 4G WiMAX Full Band TTLNA. Improved User selection Mode.

Diversity port for AISG and Dc feeding

Product Category Part Number Description PDU Power Distribution

Unit KUNCTC102000 Supply Voltage +36[V] ~+72[V], TYP +24[V]

Max Power Consumption Max. 2.4 A Including Alarm Cable & Power cable

TMA

Power Distribution Units are rugged and designed to provide reliable, well conditioned power for our TMAs and other peripheral devices.

KMW TMA Products

PDU KMW Power Distribution Unit

KMW Communications



www.kmwcomm.com

<Triple Mode Resonance & Triple Notches from One Ceramic DR>

Advanced Technology • Triple Mode Resonance & Triple Notches from

One Ceramic DR. • Ceramic Resonator fabrication with maximum Q

factor, accurate resonant frequency and temperature coefficient.

• Extremely sharp rejection & high power handling.

Key Benefits • Frequency full utilization • Low Insertion Loss • Small Size & Light Weight • Low Inter Modulation Distortion • Cast Design & High Productivity

Compared Conventional vs. Black Hole Filter

Cavity Filter (TEM mode)

Ceramic Filter (TM mode)

Ceramic Filter (TEσ01 mode)

Super Conductor

Black Hole Filter

Q Factor 7500 11000 18000 45000 24000×3= 72000

Size Δ Δ Δ Δ O

Weight Δ Δ × × O

Insertion Loss × Δ O O O

Attenuation × Δ O O O

Reliability O O O × O

PIMD O O O ‐ O

Performance vs Cost Δ Δ Δ × O

Handling Power O O O × O

Bad : ×, Normal : Δ, Good : O, Very Good : O

Freq: 860MHz Q: Single Cavity Size (90 x 90 x 90mm)

Triple Mode Technology (Black Hole Filter)Filter

KMW Communications



www.kmwcomm.com

Product Category Part Number Description Band Rejection Filter TBD 700MHz Triple Mode Rejection Filter (Black Hole Filter) Multi Step Combiner TBD Migration Step Selectable In‐Band Co‐Siting Solution (Big Bang)

(1850 – 1990MHz) In‐Band Combiner TBD In‐Band Combiner with 30MHz Guard Band in between Pass Band TBD In‐Band Combiner with 5 MHz Guard Band in between Pass Band

Filter

Dual Band Combiner (AWS/PCS)

KUNAPA201001 AWS/PCS Band Combiner

Cross Band Coupler Standard

KDXCV0012015 Diplexer, AWS & 700MHz

Cross Band Coupler With Sniffer port

KDXCV0012016 Diplexer, AWS & 700MHz with Sniffer Port

Cross Band Coupler With Sniffer/AISG

port

KDXCV0012017 Diplexer, AWS & 700MHz with Sniffer / AISG port

Filter

Base Station Co‐Siting Solution is a growing trend in the mobile/wireless industry. We provide effective, reliable frequency multiplexers with low‐loss single‐band/ dual band/tri‐band solutions.

KMW Filter Products

CAMS Central Antenna Management System

Web interface Central Antenna Management System allows easy communication module, user update function for additional network elements, managed security module, and automatic optimization and load balancing to users to save cost, improve customer satisfaction, and reduce churn.

KMW Communications



www.kmwcomm.com

Accessories KMW Accessory Products

Product Category Part Number Description

Bias‐T

AWS/PCS DC Bias‐T

KASCT8R80005 Bias‐T with Lightening Arrestor. 1710~2170MHz ANT port ‐ N type(Female), BTS port ‐ N type(Male)

KASCTR182034 Bias‐T with Lightening Arrestor. 1850~1990MHz ANT port ‐ DIN type(Female), BTS port ‐ DIN type(Male)

KASCTR182035 Bias‐T with Lightening Arrestor. 1850~1990MHz ANT port ‐ DIN type(Male), BTS port ‐ DIN type(Female)

KASCTR182039 Bias‐T with Lightening Arrestor. 1710~2170MHz ANT port ‐ DIN type(Female), BTS port ‐ DIN type(Male)

KASCTR182040 Bias‐T with Lightening Arrestor. 1710~2170MHz ANT port ‐ DIN type(Male), BTS port ‐ DIN type(Female)

WiMAX Directional Coupler Bias‐T

KASCTRS82000 2496 ~ 2690MHz (TOP)

WiMAX Directional Coupler Bias‐T

KASPTRS82000 2496 ~ 2690MHZ (Bottom)

700 MHz/AWS Smart Bias‐T

KASCTPR82002 Smart Bias‐T (TOP/F/F)[700MHz / AWS]


KASCTPR82003 Smart Bias‐T (Bottom/F/F)[700MHz / AWS]


KASCTPR82004 Smart Bias‐T (TOP/F/M)[700MHz / AWS]


KASCTPR82005 Smart Bias‐T (Bottom/F/M)[700MHz / AWS]


KASCTPR82006 Smart Bias‐T (TOP/M/F)[700MHz / AWS]


KASCTPR82007 Smart Bias‐T (Bottom/M/F)[700MHz / AWS]

Controller Portable Controller PACKIT‐I

Portable Antenna Controller (PAC) Universal Remote Controller Kit for AWS(1710~2170MHz) band for electrical downtilt/Azimuth steering

PAC‐A Portable Antenna Controller (PAC) Universal Remote Controller Kit for WiMAX(2496~2690MHz) for electrical downtilt/Azimuth steering

Air Interface Control Master

KUNAN0401000 Remote Electrical Tilt Antenna controller unit for BTS RACK (AWS Band)

Tower Interface Control Unit (At BTS)

KMWK‐TICU Remote Electrical Tilt Antenna controller unit for BTS RACK (AISG)

Bracket Mounting Bracket KMOPTILTBRK1 Antenna Down tilt Bracket

Cable TMA DC Cable KUNCTC102000 TMA DC Cable Approx 6.5 Ft (For connection between PDU to Bias‐T) requires 1 Unit per TMA

SMA Cable 10M RG‐316 SMA 10M RG‐316 SMA Cable 10M RG‐400 SMA 10M RG‐400 SMA Cable

30M RG‐400 SMA 30M RG‐400 SMA Cable 40M RG‐400 SMA 40M RG‐400 SMA Cable

50M RG‐400 SMA 50M RG‐400 SMA Cable

60M RG‐400 SMA 60M RG‐400 SMA Cable

70M RG‐400 SMA 70M RG‐400 SMA Cable 80M RG‐400 SMA 80M RG‐400 SMA Cable 90M RG‐400 SMA 90M RG‐400 SMA Cable 100M RG‐400 SMA 100M RG‐400 SMA Cable 150M RG‐400 SMA 150M RG‐400 SMA Cable

KMW manufactures antenna’s mounting accessories. Our products include convenience components, such as Bias‐Ts, mechanical tilt brackets, and control cables.

www.kmwcomm.com

KMW Communications Base Station Antennas For Mobile Communications

Antenna Products

www.kmwcomm.com


HB-X-AW-17-65-00T-RET Hybrid 2-way Antenna-Electrical DownTilt & Steering

1710 ~ 2170MHz, X-pol., H65˚ / V 7.5˚

Electrical Specification Frequency Range 1710~2170MHz

Gain 17.0 dBi

Beamwidth Horizontal 65˚

Vertical 7.5˚

Impedance 50Ω

VSWR ≤1.4:1

Polarization Dual, Slant ±45˚

Upper 1st Sidelobe Suppression ≥18 dB (@downtilt 0˚)

Front-to-Back Ratio ≥25 dB

Cross Polarization Ratio ≥18 dB

Adjustable Downtilt Range 0˚ ~ 15˚

Horizontal Beam Steering -30˚ ~ +30˚

Port-to-port Isolation ≥30 dB

PIMD ≤-150 dBc

Input Maximum CW Power 250 W

Control Interface AISG 2.0

Specifications are subject to change.

Horizontal Pattern Vertical Pattern (Downtilt 0˚)

Horizontal Beam Steering Vertical Pattern (Downtilt 15˚)

Dimension (Diameter×H) Φ156×1219mm(Φ6.2×48inch)

Weight (Without clamp) 9.0 kg(19.84 lb)

Connector 2 x 7/16 DIN(F) / Bottom

Max Wind Speed 60m/s(135mph)

Wind Load (@100 mph) 43.82 lbf (194.85 N)

Mechanical Specification

www.kmwcomm.com


HB-X-AW-19-65-00T-RET

Hybrid 2-way Antenna-Electrical DownTilt & Steering

1710 ~ 2170MHz, X-pol., H65˚ / V5.0˚


Gain 19.0 dBi


Vertical 5.0˚

Impedance 50Ω

VSWR ≤1.4:1








PIMD ≤-150 dBc




Horizontal Pattern Vertical Pattern(Downtilt 0˚)

Horizontal Beam Steering Vertical Pattern(Downtilt 6˚)

Dimension (Diameter) Φ156×1829mm(Φ6.2×72inch)

Weight (Without clamp) 12.5 kg(27.55 lb)





www.kmwcomm.com



1710 ~ 2170MHz, X-pol., H90˚ / V7.8˚

Electrical Specification

Frequency Range 1710~2170MHz

Gain 16.0 dBi


Vertical 7.8˚

Impedance 50Ω

VSWR ≤1.4:1








PIMD ≤-150 dBc





Horizontal Beam steering Vertical Pattern(Downtilt 10˚)

Dimension (Diameter×H) Φ156×1219mm (Φ6.2×48inch)

Weight (Without clamp) 9.0 kg (19.84 lb)





www.kmwcomm.com



1710 ~ 2170MHz, X-pol., H45˚ / V7.5˚



Gain 18.5 dBi


Vertical 7.5˚

Impedance 50Ω

VSWR ≤1.4:1







PIMD ≤-150 dBc






Dimension(Diameter×H) Φ256×1219mm(Φ10.08×48inch)

Weight(Without clamp) 14 kg (30.87 lb)





www.kmwcomm.com



1710 ~ 2170MHz, X-pol., H33˚ / V7.2˚



Gain 19.0 dBi


Vertical 7.2˚

Impedance 50Ω

VSWR ≤1.4:1







PIMD ≤-150 dBc






Dimension(Diameter×H) Φ256×1219mm(Φ10.08×48inch)






www.kmwcomm.com


HB-X-AW-23-33-00T-RET [Preliminary]

Hybrid 2-way Antenna-Electrical DownTilt & Steering

1710 ~ 2170MHz, X-pol., H33˚ / V4.2˚


Gain 23.0 dBi


Vertical 4.2˚

Impedance 50Ω

VSWR ≤1.4:1








PIMD ≤-150 dBc






Dimension(Diameter×H) Φ256×2131mm(Φ10.08×83.9inch)






www.kmwcomm.com


DA-X-AW-13-65-02T [Preliminary Spec]

Fixed Electrical DownTilt Antenna

1710 ~ 2180MHz, X-pol., H65˚ / V16˚

Electrical Specifications Frequency Range 1710~2180MHz

Gain 12.7 dBi×3sectors


Vertical 16.0˚

VSWR ≤1.4:1


Impedance 50Ω

Fixed Electrical Downtilt 2˚

Upper 1st Sidelobe Suppression ≥18 dB


Passive Intermodulation, IM3 ≤-150 dBc (@43dBm, 2tones)



l


Dimension(Dia.×H) Φ8.11×24 inches

Weight 35 lbs (Without Mount Adaptor)


1 x SMA(F) / Bottom

Max Wind Speed 150mph


Vertical Pattern (Downtilt 6˚)

www.kmwcomm.com


DA-X-AW-13-65-02T [Preliminary Spec] Fixed Electrical DownTilt Antenna Block Diagram

www.kmwcomm.com


DA-X-AW-14-65-02T3 [Preliminary Spec] Fixed Electrical DownTilt Antenna

1710 ~ 2180MHz, X-pol., H65˚ / V16˚

Electrical Specifications


Gain 13.5 dBi×3sectors

Omni Gain 8.8dBi


Vertical 16.0˚

VSWR ≤1.4:1


Impedance 50Ω

Fixed Electrical Downtilt 2˚

Horizontal Beam steering N/A

Upper 1st Sidelobe Suppression ≥18 dB


Passive Intermodulation, IM3 ≤-150 dBc (@43dBm, 2tones)



l


Dimension(Dia.×H) Φ8.11×24 inches

Weight 30 lbs (Without Mount Adaptor)


1 x SMA(F) / Bottom



www.kmwcomm.com


DA-X-AW-14-65-02T3 [Preliminary Spec] Fixed Electrical DownTilt Antenna

3WAY Combiner


Insertion Loss ≤0.3dB(above 4.78dB)

VSWR ≤1.3:1

Connector Type 7/16 DIN(F)

Impedance 50Ω


Block Diagram

Alpha Beta Gamma

+45 -45

Control

www.kmwcomm.com


FX-X-CD-16-65-00T-RET Dual Band Electrical DownTilt Antenna

698 ~ 894MHz, X-pol., H65˚ / V15˚ 1710 ~ 2170MHz, X-pol., H65˚ / V7.5˚


Frequency Range 698 ~ 894 MHz 1710 ~ 2170 MHz

Gain 14.0 dBi 16.5.0 dBi

Beamwidth Horizontal 65° 65°

Vertical 15° 7.5°

Impedance 50Ω 50Ω

VSWR ≤1.5:1 ≤1.5:1

Polarization Dual, Slant ±45° Dual, Slant ±45°

Front-to-Back Ratio ≥30 dB ≥30 dB

Electrical Downtilt Range Fixed Fixed

Passive Intermediation ≤ -150 dBc ≤ -150 dBc

Input Maximum CW Power 500W 250W

Dimension (W×D×H) 12.6×7.87×54 inches


Connector 4 x 7/16 DIN(F),Bottom

Max Wind Speed 60 m/s



www.kmwcomm.com


FX-X-CD-16-65-00T-RET Dual Band Electrical Down Tilt Antenna

[700MHz_Band Pattern]

[AWS_Band Pattern]



www.kmwcomm.com


FX-X-CD-18-65-00T-RET Dual Band Electrical DownTilt Antenna




Gain 14.0 dBi 16.5 dBi


Vertical 10° 6.0°

Impedance 50Ω 50Ω

VSWR ≤1.5:1 ≤1.5:1



Electrical Downtilt Range Fixed Fixed









www.kmwcomm.com


FX-X-CD-18-65-00T-RET Dual Band Electrical Down Tilt Antenna



[AWS Band Pattern]


www.kmwcomm.com


AM-X-CD-16-65-00T-RET (54”) Dual Band Electrical DownTilt Antenna




Gain 14.0 dBi 16.5.0 dBi


Vertical 15° 7.5°

Impedance 50Ω 50Ω

VSWR ≤1.5:1 ≤1.5:1



Electrical Downtilt Range 0° ~ 8° 0° ~ 8°









www.kmwcomm.com


AM-X-CD-16-65-00T-RET (54”) Dual Band Electrical Down Tilt Antenna


Vertical Pattern(Downtilt 8˚)



[AWS_Band Pattern]


www.kmwcomm.com


AM-X-CW-14-65-00T-RET (4’ 65˚ Broadband Antenna) Single Band Electrical DownTilt Antenna 698 ~ 894MHz, X-pol., H65˚ / V17˚ Electrical Specification

Frequency Range 698~806MHz 806~894MHz

Impedance 50Ω


Gain 14.0dBi / 11.85dBd 15.0dBi / 12.85dBd

Beamwidth Horizontal 67˚ 66˚

Vertical 17.8˚ 16.5˚

VSWR ≤1.4:1


Electrical Downtilt Range 2˚ ~ 16˚

Isolation Between Ports ≥30 dB

Cross Pole Discrimination 10.0 dB @ ±60˚ 15.0 dBi @ 0˚

First Upper Side Lobe Suppression 16dB

Side Lobe Suppression > 16dB @ 0-6˚ Tilt

> 18 dB @ 7-12˚ Tilt(Up to 15˚ from Boresight)

Passive Intermodulation ≤ -150 dBc @ 2x20w


Environmental Compliance IP65 for Radome

IP67 for Connectors

RET Motor Configuration Field Replaceable RET Electronic Control Module /

RET Motor is internal to antenna & not field replaceable

Compliant with AISG 1.1 and 2.0 AISG 1.1 and 2.0


Dimension (W×D×H) 11.8×5.9×48 inches (300×150×1219 mm)

Weight (Without clamp) 30.8 lbs (14.0 kg)

Connector

2 x 7/16 DIN(F), Long Neck

Max Wind Speed 150 mph

Wind Load (@150 mph) 1260 N

www.kmwcomm.com


AM-X-CW-14-65-00T-RET(4’ 65˚ Broadband Antenna)


700MHz band Pattern

700MHz

+45˚

700MHz

45˚

RET

www.kmwcomm.com


AM-X-CW-14-65-00T-RET(4’ 65˚ Broadband Antenna) Antenna Drawings and Installation Diagram

Ø1.97 ~ 3.15inch OD.(50 ~ 80mm OD.)

MOUNT POLE

2 Hex. Cap Bolt, M10Plain Washer, M10Spring Washer, M10

543

Hex. Nut, M10

PART NAME1

No.FIXED CLAMP

17mm Spanner4

240kgf.cm 208lbf.inch

48

4

4Q'TY Recommending Torque

3 4 5

21

www.kmwcomm.com



Single Band Electrical DownTilt Antenna 698 ~ 894MHz, X-pol., H65˚ / V11.5˚ Electrical Specification


Impedance 50Ω


Gain 15.5dBi / 13.35dBd 16.0dBi / 13.85dBd

Beamwidth Horizontal 67.5˚ 67˚


VSWR ≤1.4:1











IP67 for Connectors





Dimension (W×D×H) 11.8×5.9×72 inches (300×150×1829mm)


Connector




www.kmwcomm.com


AM-X-CW-16-65-00T-RET (6’ 65˚ Broadband Antenna)


700MHz band Pattern

700MHz

+45˚

700MHz

45˚

RET

www.kmwcomm.com


AM-X-CW-16-65-00T-RET (6’ 65˚ Broadband Antenna) Antenna Drawings and Installation Diagram

Ø1.97 ~ 3.15inch OD.(50 ~ 80mm OD.)

MOUNT POLE


543

Hex. Nut, M10

PART NAME1

No.FIXED CLAMP

17mm Spanner4


48

4


3 4 5

21

www.kmwcomm.com





Impedance 50Ω


Gain 16.8 dBi / 14.55dBd 17.5 dBi / 15.35dBd



VSWR ≤1.4:1











IP67 for Connectors







Connector




www.kmwcomm.com




700MHz band Pattern

700MHz

+45˚

700MHz

45˚

RET

www.kmwcomm.com



Ø1.97 ~ 3.15inch OD.(50 ~ 80mm OD.)

MOUNT POLE


543

Hex. Nut, M10

PART NAME1

No.FIXED CLAMP

17mm Spanner4


48

4


3 4 5

21

www.kmwcomm.com



Single Band Electrical DownTilt Antenna 698 ~ 894MHz, X-pol., H85˚ / V17˚ Electrical Specification


Impedance 50Ω


Gain 12.2 dBi / 10.05dBd 13.0 dBi / 10.85 dBd


Vertical 18.3˚ 17˚

VSWR ≤1.4:1




Cross Pole Discrimination 10.0 dB @ ±60˚

15.0 dB @0˚

First Upper Side Lobe Suppression 16 dB






IP67 for Connectors







Connector




www.kmwcomm.com




700MHz band Pattern

700MHz

+45˚

700MHz

45˚

RET

www.kmwcomm.com



Ø1.97 ~ 3.15inch OD.(50 ~ 80mm OD.)

MOUNT POLE


543

Hex. Nut, M10

PART NAME1

No.FIXED CLAMP

17mm Spanner4


48

4


3 4 5

21

www.kmwcomm.com



Single Band Electrical DownTilt Antenna 698 ~ 894MHz, X-pol., H85˚ / V12˚ Electrical Specification


Impedance 50Ω


Gain 13.7 dBi / 11.55dBd 14.5 dBi / 12.35dBd


Vertical 13.2˚ 12˚

VSWR ≤1.4:1





15.0 dB @0˚



> 18 dB @ 7-12˚ Tilt (Up to 10˚ from Boresight)




IP67 for Connectors







Connector




www.kmwcomm.com




700MHz band Pattern

700MHz

+45˚

700MHz

45˚

RET

www.kmwcomm.com



Ø1.97 ~ 3.15inch OD.(50 ~ 80mm OD.)

MOUNT POLE


543

Hex. Nut, M10

PART NAME1

No.FIXED CLAMP

17mm Spanner4


48

4


3 4 5

21

www.kmwcomm.com





Impedance 50Ω


Gain 14.8dBi / 12.65dBd 15.5 dBi / 13.35dBd


Vertical 9.2˚ 8˚

VSWR ≤1.4:1





15.0 dB @0˚





Input Maximum CW Power ©500 W


IP67 for Connectors







Connector




www.kmwcomm.com




700MHz band Pattern

700MHz

+45˚

700MHz

45˚

RET

www.kmwcomm.com



Ø1.97 ~ 3.15inch OD.(50 ~ 80mm OD.)

MOUNT POLE


543

Hex. Nut, M10

PART NAME1

No.FIXED CLAMP

17mm Spanner4


48

4


3 4 5

21

www.kmwcomm.com


AM-X-CD-14-65-00T-RET (4’ 65˚ Dual Broadband Antenna) Dual Band Electrical DownTilt Antenna

698 ~ 894MHz, X-pol., H65˚ / V17.0˚

1710 ~ 2170MHz, X-pol., H65˚ / V8.5˚

Electrical Specification Frequency Range 698~894MHz 1710~2170MHz

Impedance 50Ω


Gain 14.0dBi / 11.85dBd @ 698-806MHz 14.8dBi / 12.65dBd @ 824-894MHz

16.1dBi / 13.95dBd @1710-1755MHz 16.3dBi / 14.15dBd @1850-1900MHz 16.0dBi / 13.85dBd @2110-2155MHz

Beamwidth

Horizontal 67˚ @ 698-806MHz 65˚ @ 824-894MHz

60˚ @ 1710-1755MHz 61˚ @ 1850-1900MHz 64˚ @ 2110-2155MHz

Vertical 17.5 @ 698-806MHz 16.5˚ @ 824-894MHz

8.8˚ @ 1710-1755MHz 8.5˚ @ 1850-1900MHz 8.0˚ @ 2110-2155MHz

VSWR ≤1.5:1


Electrical Downtilt Range 2˚ ~ 16˚ 0˚ ~ 10˚


Isolation Between Ports of Different Frequency Elements ≥35 dB



Side Lobe Suppression > 16 dB @ 0-6˚ Tilt


> 16 dB @ 0-6˚ Tilt > 18 dB @ 7-10˚ Tilt

(Up to 15˚ from Boresight)


Input Maximum CW Power 500 W 300 W


IP67 for Connectors






Connector





www.kmwcomm.com


AM-X-CD-14-65-00T-RET (4’ 65˚ Dual Broadband Antenna)


700MHz band Pattern


AWS band Pattern

700MHz

+45˚

700MHz

45˚

RET

AWS

+45˚

AWS

45˚

www.kmwcomm.com


AM-X-CD-14-65-00T-RET (4’ 65˚ Dual Broadband Antenna) Antenna Drawings and Installation Diagram

MOUNT POLE

(50 ~ 80mm OD.)Ø1.97 ~ 3.15inch OD. PART NAME

23

1No.

54 Spring Washer, M10

FIXED CLAMP

Hex. Nut, M10

Plain Washer, M10Hex. Cap Bolt, M10

4Q'TY

4

84

4

240kgf.cm

17mm Spanner

Recommending Torque

208lbf.inch

543

21

www.kmwcomm.com


AM-X-CD-16-65-00T-RET(6’ 65˚ Dual Broadband Antenna) Dual Band Electrical DownTilt Antenna

698 ~ 894MHz, X-pol., H65˚ / V12˚

1710 ~ 2170MHz, X-pol., H65˚ / V6.0˚


Impedance 50Ω



17.3dBi / 15.15dBd @ 1710-1755MHz 17.4dBi / 15.25dBd @ 1850-1900MHz 17.1dBi / 14.95dBd @ 2110-2155MHz

Beamwidth


65˚ @ 1710-1755MHz 67˚ @ 1850-1900MHz 69˚ @ 2110-2155MHz

Vertical 12.3˚ @ 698-806MHz 11.5˚ @ 824-894MHz

6.5˚ @ 1710-1755MHz 6.0˚ @ 1850-1900MHz 5.7˚ @ 2110-2155MHz

VSWR ≤1.5:1







Side Lobe Suppression > 16 dB @ 0-6˚ Tilt > 18 dB @ 7-12˚ Tilt


> 16 dB @ 0-6˚ Tilt > 18 dB @ 7-10˚ Tilt





IP67 for Connectors





300



Connector




www.kmwcomm.com


AM-X-CD-16-65-00T-RET(6’ 65˚ Dual Broadband Antenna)


700MHz band Pattern


AWS band Pattern

700MHz

+45˚

700MHz

45˚

RET

AWS

+45˚

AWS

45˚

www.kmwcomm.com


AM-X-CD-16-65-00T-RET(6’ 65˚ Dual Broadband Antenna) Antenna Drawings and Installation Diagram

MOUNT POLE


23

1No.


FIXED CLAMP

Hex. Nut, M10


4Q'TY

4

84

4

240kgf.cm

17mm Spanner

Recommending Torque

208lbf.inch

543

21

www.kmwcomm.com



698 ~ 894MHz, X-pol., H65˚ / V8.0˚

1710 ~ 2170MHz, X-pol., H65˚ / V7.0˚


Impedance 50Ω




Beamwidth


67˚ @ 1710-1755MHz 65˚ @ 1850-1900MHz 62˚ @ 2110-2155MHz

Vertical 9.2˚ @ 698-806MHz 8.0˚ @ 824-894MHz

7.3˚ @ 1710-1755MHz 7.0˚ @ 1850-1900MHz 6.7˚ @ 2110-2155MHz

VSWR ≤1.5:1







Side Lobe Suppression > 16 dB @ 0-6˚ Tilt > 18 dB @ 7-12˚ Tilt


> 16 dB @ 0-6˚ Tilt > 18 dB @ 7-10˚ Tilt





IP67 for Connectors







Connector




www.kmwcomm.com




700MHz band Pattern


AWS band Pattern

700MHz

+45˚

700MHz

45˚

RET

AWS

+45˚

AWS

45˚

www.kmwcomm.com


AM-X-CD-17-65-00T-RET(8’ 65˚ Dual Broadband Antenna) Antenna Drawings and Installation Diagram

MOUNT POLE


23

1No.


FIXED CLAMP

Hex. Nut, M10


4Q'TY

4

84

4

240kgf.cm

17mm Spanner

Recommending Torque

208lbf.inch

543

21

www.kmwcomm.com


AM-X-CD-13-85-00T-RET(4’ 85˚ Dual Bandband Antenna) Dual Band Electrical DownTilt Antenna

698 ~ 894MHz, X-pol., H85˚ / V17˚

1710 ~ 2170MHz, X-pol., H85 / V8.0˚


Impedance 50Ω


Gain 12.2dBi / 10.05dBd @ 698-806MHz

13.0dBi / 10.8dBd @ 824-894MHz

15.0dBi / 12.85dBd @1710-1755MHz 15.3dBi / 13.15dBd @1850-1900MHz

15.5dBi / 13.35dBd @2110-2155MHz

Beamwidth

Horizontal 85˚ @ 698-806MHz

80˚ @ 824-894MHz

87˚ @ 1710-1755MHz 85˚ @ 1850-1900MHz

82˚ @ 2110-2155MHz

Vertical 18.2˚ @ 698-806MHz

17˚ @ 824-894MHz

8.5˚ @ 1710-1755MHz 8.2˚ @ 1850-1900MHz

7.8˚ @ 2110-2155MHz

VSWR ≤1.5:1





Cross Pole Discrimination 10.0 dB @ ±60˚ / 15.0 dB @0˚


Side Lobe Suppression

> 16 dB @ 0-6˚ Tilt

> 18 dB @ 7-12˚ Tilt


> 16 dB @ 0-6˚ Tilt

> 18 dB @ 7-10˚ Tilt





IP67 for Connectors







Connector 4 x 7/16 DIN(F), Long Neck



www.kmwcomm.com




700MHz band Pattern


AWS band Pattern

700MHz

+45˚

700MHz

45˚

RET

AWS

+45˚

AWS

45˚

www.kmwcomm.com



MOUNT POLE


23

1No.


FIXED CLAMP

Hex. Nut, M10


4Q'TY

4

84

4

240kgf.cm

17mm Spanner

Recommending Torque

208lbf.inch

543

21

www.kmwcomm.com



698 ~ 894MHz, X-pol., H85˚ / V12˚

1710 ~ 2170MHz, X-pol., H85˚ / V5.0˚


Impedance 50Ω




Beamwidth


87˚ @ 1710-1755MHz 85˚ @ 1850-1900MHz 82˚ @ 2110-2155MHz

Vertical 13.2˚ @ 698-806MHz 12.0˚ @ 824-894MHz

5.5˚ @ 1710-1755MHz 5.2˚ @ 1850-1900MHz 4.8˚ @ 2110-2155MHz

VSWR ≤1.5:1





Cross Pole Discrimination© 10.0 dB @ ±60˚ / 15.0 dB @0˚



> 16 dB @ 0-6˚ Tilt

>18 dB @ 7-12˚ Tilt


> 16 dB @ 0-6˚ Tilt

>18 dB @ 7-10˚ Tilt





IP67 for Connectors










www.kmwcomm.com




700MHz band Pattern


AWS band Pattern

700MHz

+45˚

700MHz

45˚

RET

AWS

+45˚

AWS

45˚

www.kmwcomm.com



MOUNT POLE


23

1No.


FIXED CLAMP

Hex. Nut, M10


4Q'TY

4

84

4

240kgf.cm

17mm Spanner

Recommending Torque

208lbf.inch

543

21

www.kmwcomm.com


AM-X-CD-16-85-00T-RET (8’ 85˚ Dual Broadband Antenna) Dual Band Electrical DownTilt Antenna

698 ~ 894MHz, X-pol., H85˚ / V8.0˚

1710 ~ 2170MHz, X-pol., H85˚ / V5.0˚


Impedance 50Ω


Gain 14.7dBi / 12.55dBd @ 698-806MHz

15.5dBi / 13.35dBd @ 824-894MHz

16.0dBi / 13.85dBd @ 1710-1755MHz 16.3dBi / 14.15dBd @ 1850-1900MHz

16.5dBi / 14.35dBd @ 2110-2155MHz

Beamwidth

Horizontal

85˚ @ 698-806MHz

80˚ @ 824-894MHz

87˚ @ 1710-1755MHz 85˚ @ 1850-1900MHz

82˚ @ 2110-2155MHz

Vertical

9.2˚ @ 698-806MHz

8.0˚ @ 824-894MHz

5.5˚ @ 1710-1755MHz 5.2˚ @ 1850-1900MHz

4.8˚ @ 2110-2155MHz

VSWR ≤1.5:1





Cross Pole Discrimination 10.0 dB @ ±60˚ / 15.0 dB @0˚



> 16 dB @ 0-6˚ Tilt

>18 dB @ 7-12˚ Tilt


> 16 dB @ 0-6˚ Tilt

>18 dB @ 7-10˚ Tilt




Environmental Compliance IP65 for Radome / IP67 for Connectors










www.kmwcomm.com


AM-X-CD-16-85-00T-RET (8’ 85˚ Dual Broadband Antenna)


700MHz band Pattern


AWS band Pattern

700MHz

+45˚

700MHz

45˚

RET

AWS

+45˚

AWS

45˚

www.kmwcomm.com



MOUNT POLE


23

1No.


FIXED CLAMP

Hex. Nut, M10


4Q'TY

4

84

4

240kgf.cm

17mm Spanner

Recommending Torque

208lbf.inch

543

21

www.kmwcomm.com


AM-V-CW-14-65-00T Electrical DownTilt Antenna

698 ~ 894MHz, V-pol., H65˚ / V15˚


Gain 14.1 dBi / 12.0dBd


Vertical 15˚

Impedance 50Ω

VSWR ≤1.4:1

Polarization Vertical



Passive Intermodulation ≤ -150 dBc


Control Interface Knob Type



Dimension(W×D×H) 12.6×5.9×54inches


Connector 2 x 7/16 DIN(F)

Max Wind Speed 60m/s

Mechanical Specifications

www.kmwcomm.com


AM-X-WM-17-65-00T

Electrical DownTilt Antenna

2496 ~ 2690MHz, X-pol., H65˚ / V7˚


Gain 17.5 dBi


Vertical 7˚

Impedance 50Ω

VSWR ≤1.35:1(Downtilt 0˚ ~ 10˚)






Passive Intermodulation, IM3 ≤ -153 dBc


Control Interface AISG (Version 2.0)



Vertical


Dimension

Antenna (Without clamp)

6.54×2.6×48.00 inch

RET 2.34×1.18×7.73 inch

Weight

Antenna (Without clamp)

14.2 lbs

RET 1.2 lbs

Connector 2 x 7/16 Din(F)


www.kmwcomm.com


AM-X-WM-17-65-00T

www.kmwcomm.com


AM-X-WM-17-65-00T-FP Electrical DownTilt Antenna

2496 ~ 2690MHz, X-pol., H65˚ / V7˚


Gain 17.5 dBi


Vertical 7˚

Impedance 50Ω

VSWR ≤1.35:1(Downtilt 0˚ ~ 10˚)












Dimension Antenna

(Without clamp) 6.54×2.6×48.00 inch

RET 2.34×1.18×7.73 inch

Weight Antenna

(Without clamp) 14.2lbs X 3 (42.6 lbs)

RET 1.2 lbs X 3 (3.6 lbs)



www.kmwcomm.com


AM-X-WM-17-65-00T-FP Antenna Drawings and Installation Diagram

2

3

4

1

CLAMPFLAG POLE

6Antenna Bracket223 Sector Clamp

Mounting Support Clamp

3Q'TYPart Name

23

1

4

No.EDTA with RET

www.kmwcomm.com


AQ-X-WM-18-65-00T-RET

Electrical DownTilt Quad-pole Antenna

2496 ~ 2690MHz, XX-pol., H65˚ / V6.5 ˚

Electrical Specification of Antenna


M



Frequency Range 2496~2690 MHz

Gain 4×18.0dBi


Vertical 6.5˚

Impedance 50Ω

VSWR ≤1.4:1

Polarization Qual, Slant ±45˚

Upper 1st Sidelobe Suppression ≥18 dB up to15 degrees above horizon


Adjustable Electrical Downtilt Range 0˚ ~ 10˚

Tracking < 2.5dB (±60˚ sector edges)

Cross-pol ratio >15dB (On boresight),

>10dB (±60˚ sector edges)

Null Fill >-1dBi down to 12degrees below horizon

Port to Port Isolation ≥30 dB




Dimension(W×D×H) 10×3.54×48inches

Weight (Without clamp) 13.5 kg

Connector 4 x 7/16 Din(F)/Bottom

Max Wind Speed 135mph (60m/s)


www.kmwcomm.com


HB-X-WM-17-65-00T Electrical Down Tilt and Azimuth Steering Antenna

2496 ~ 2690MHz, X-pol., H65˚ / V7˚


Gain 17.5 dBi


Vertical 7˚

Impedance 50Ω

VSWR ≤1.35:1(Downtilt 0˚ ~ 10˚)














Dimension Antenna

(Without clamp) 7.32×48.00 inch

RET 2.05×1.78×6.34 inch

Weight Antenna

(Without clamp) 30.0 lbs

RET 1.4 lbs



www.kmwcomm.com


HB-X-WM-17-65-00T Dual Phase Electrical Down Tilt & Azimuth Steering

www.kmwcomm.com


HB-X-WM-14-65-00T Hybrid 2-way Antenna-Electrical DownTilt & Steering

2496 ~ 2690MHz, X-pol., H65˚ / V14˚



Gain 14.0 dBi


Vertical 14˚

Impedance 50Ω

VSWR ≤1.35:1









Control Interface AISG

Horizontal Pattern Vertical Pattern(Downtilt 0˚) Mechanical Specification


Dimension Antenna

(Without clamp) Φ7.32×24.00 inch

Weight Antenna (Without clamp) 12.3 lbs

Connector 2 x 7/16 Din(M)


www.kmwcomm.com


HB-X-WM-14-65-00T Hybrid 2-way Antenna-Electrical DownTilt & Steering Antenna Drawings and Installation Diagram

www.kmwcomm.com


AQ-X-WM-18-65-00T-RET Electrical Downtilt Quad Pol. Antenna

2496 ~ 2690MHz, XX-pol., H65˚ / V6.5 ˚







Gain 4×18.0dBi


Vertical 6.5˚

Impedance 50Ω

VSWR ≤1.4:1













Dimension(W×D×H) 10.0×3.54x48inches




www.kmwcomm.com


AQ-X-WM-16-90-00T-RET

Electrical Downtilt Quad Pol. Antenna

2496 ~ 2690MHz, XX-pol., H90˚ / V6.5 ˚







Gain 4×16.0dBi


Vertical 6.5˚

Impedance 50Ω

VSWR ≤1.4:1













Dimension(W×D×H) 10.0×3.54x48inches




www.kmwcomm.com


HQ-X-WM-17-65-00T-RET Hybrid 2 way Quad Pol. Antenna Electrical Downtilt & Steering

2496 ~ 2690MHz, XX-pol., H90˚ / V6.5 ˚







Gain 4×17.5dBi


Vertical 6.5˚

Impedance 50Ω

VSWR ≤1.43:1














Dimension(W×D×H) Φ10.0×48inches




www.kmwcomm.com


HQ-X-WM-16-90-00T-RET

Hybrid 2 way Quad Pol. Antenna Electrical Downtilt & Steering

2496 ~ 2690MHz, XX-pol., H90˚ / V6.5 ˚ Electrical Specification




Gain 4×16.0dBi


Vertical 6.5˚

Impedance 50Ω

VSWR ≤1.43:1














Dimension(W×D×H) Φ10.0×48inches




0


www.kmwcomm.com

TMA Products

0


www.kmwcomm.com

Parameter Specification

Electrical Specification Uplink

Frequency Range 1710 ~ 1755 MHz (45MHz)

Gain 12 ±1 dB

Return Loss ≥18 dB

Noise Figure 1.1dB Typical, Mid Band

1.5dB Typical, Full Band

OIP3 +24 dBm. Typical

Tx band Rejection >80 dB

Group Delay Max. <40ns

Group Delay Variation <8ns (@5Mhz)

Bypass Insertion Loss <1.6dB Typical

Bypass Return Loss >14dB

Supply voltage +10V ~ +30V

Power Consumption 7.5W Max.

Inrush Current Max. 1.0A Electrical Specification Downlink

Frequency Range 2110 ~2155 (45Mhz)

Insertion Loss 0.3 dB, max.

Return Loss ≥18dB

Rx Band Rejection >50dB

Group Delay Max. <15ns

Group Delay Variation <8ns (@5MHz)

Average Operating Power 200Watts

Power handling Survival 4.0 KW

3rd order PIM in Rx Band (@ BTS 2*43dBm) -117 dBm Max.

Impedance 50 ohms Mechanical Specification

Weight 3.6 Kg Typical

Dimension 313.6mm x 146.0mm x 89.9mm W/BKT

Color Gray Connector Type (@ ANT) 7-16 DIN female

Connector Type (@ BTS) 7-16 DIN female

Mounting Wall, Pole

RBS 1, RBS 2 TMA DC Power & OOK

RET Port RET DC Power & RS-485

RET Specification AISG Version AISG 1.1/2.0

AISG Connector AISG Compliant, IP67

AWS Twin TMA (AISG)

0


www.kmwcomm.com


Environmental Specification

Temperature range -40°C to _ 65°C

Humidity 20-100

Air Pressure, kpa 86 to 106

Solar radiation, W/m2 1120

Lightning Protection 20KA, 8/20us

EMC and safety approvals EN 301 489-8 (2002-08)

Weather protection IP67

Wind load@115km/h 35N

Wind Speed 55ml / s

AWS Twin TMA (AISG)

0


www.kmwcomm.com

A n te n n a

R F Feed e r

R F Feed e r

T IC U(A IS G P rim a ry S ta t io n )

B TS

R G 3 16 C ab le1 . A ISG [O O K ]2 . D C P o w e r

R ET

R F Feed e r

A IS G C ab le1 . A ISG [R S485]2 . D C P o w e r

TM A

M a in D iv .

O O K B ias- T

R F Feed e r1 . R F2 . A ISG [O O K ]3 . D C P o w e r

O O K B ias- T

R F Feed e r1 . R F2 . A ISG [O O K ]3 . D C P o w e r

R F Feede r

R G 31 6 C ab le1 . A ISG [O O K ]2 . D C P o w e r

0


www.kmwcomm.com

[Drawing]

RB

S 1

(TM

A D

C)

RB

S 2

(AN

T D

C)

(AN

T D

C)

AN

T 2

AN

T 1

AWS Twin TMA

0


www.kmwcomm.com


Electrical Specification Uplink

Frequency Range 1850 ~ 1910 MHz (60MHz)

Gain 12 ±1 dB

Ripple 1.6 dB max.

Return Loss ≥ 18dB

Noise Figure 2.0 dB Max.

OIP3 +25 dBm. Max.

Total Group Delay < 160 ns

Group Delay variation < 100 ns

Group Delay distortion < 10 ns (any 240 KHz)

Bypass Insertion Loss < 2.95dB max.

Bypass Return Loss > 14dB

Supply voltage [V] +10 ~ +30

Power Consumption [W] 7.5 Max.

Inrush Current [A] Max. 1.0 Electrical Specification Downlink

Frequency Range 1930 ~ 1990 MHz (60 MHz)

Insertion Loss 0.6 dB max.

Ripple 0.5 dB max.

Return Loss ≥ 18dB

Total Group Delay < 50ns

Group Delay variation < 30ns

Average Operating Power 250 watts

Power Handling Survival 5.0 KW

3rd Order PIM in Rx band (@BTS 2*42dm) -115 dBm max

Impedance 50 ohms

Mechanical

Specification

Weight 6.2 Kg

Dimension (mm) 376.6 x 220.0 x 88.5 W/BKT

Color MUNSEL 6.0

Connector type (@ ANT) 7-16 DIN Female

Connector type (@ BTS) 7-16 DIN Female

Mounting Wall, Pole

RBS 1, RBS 2 TMA DC Power & OOK

RET Port RET DC Power & RS-485

RET Specification AISG Version AISG 1.1/2.0


PCS TMA (AISG)

0


www.kmwcomm.com

A n t e n n a

R F F e e d e r

R F F e e d e r

T I C U( A I S G P r i m a r y S t a t i o n )

B T S

R G 3 1 6 C a b l e1 . A I S G [ O O K ]2 . D C P o w e r

R E T

R F F e e d e r

A I S G C a b l e1 . A I S G [ R S 4 8 5 ]2 . D C P o w e r

T M A

M a i n D i v .

O O K B i a s - T

R F F e e d e r1 . R F2 . A I S G [ O O K ]3 . D C P o w e r

O O K B i a s - T

R F F e e d e r1 . R F2 . A I S G [ O O K ]3 . D C P o w e r

R F F e e d e r

R G 3 1 6 C a b l e1 . A I S G [ O O K ]2 . D C P o w e r



Temperature Range -40°C to +65°C

Humidity 20 ~ 100

Thermal Shock IEC 68 2-14, Test Na

Altitude (ft) 11,000

Air Pressure (kpa) 86 to 106

Solar Radiation [W/m^2] 1120

Salt fog IEC 68-2-11

Lightning Protection ±20KA, 8/20us. ALL port

EMC and safety approvals EN 301 489-8 (2002-08)

-RE, CE, ESD, EFT Weather protection IP66

Sand and Dust IEC 68-2-68 Wind Load @ 115 [km/h] 50

Wind Speed [km.h] >200

PCS TMA (AISG)

0


www.kmwcomm.com

[Drawing]

AN

T 1

RB

S 1

(TM

A D

C)

AN

T 2

(AN

T D

C)

(AN

T D

C)

RB

S 2

PCS TMA (AISG)

0


www.kmwcomm.com

Parameter Proposal Specification

AWS Up-Link Frequency Range 1710 ~ 1770MHz

TX Band Rejection, dB 80dBc. min

Gain 13dB±1dB

Filter Rejection @ 1700MHz 25dBc. min


Noise Figure, dB @ -40˚C ~ +65˚C 1.45dB. max (@1MHz Avg.)

Return Loss Normal 18.0dB. min

Bypass 15.0dB. min

Bypass Loss 1.60dB. max

Input IP3, dBm @ -40˚C ~ +65˚C +10dBm. min

AWS Down-Link

Frequency Range 2110 ~ 2170MHz

Insertion Loss 0.3 max

Return Loss 18.0dB. min

Maximum Input Power AVG : 500watt, Peak : 5,000watt

PIM @ ANT port 155dBc. min Phase Linearity Variation (over any 180KHz with in Band pass)

5deg. max

Group Delay Variation (over any 180KHz with in Band pass)

25nS. max

Amplitude Variation (over any 180KHz with in Band pass)

0.2dB. max

Environmental

Specifications

DC Input Range +7.0 ~ +30V

DC Current 220mA. max

Power Consumption in Watts 2.0W max

Lightning Protection 2KA (8/20usec)

Operation Temperature -40 ~ +65

IP Rating IP67

Wind Load@ 115 km/h(70 mph)N (lbf) 107 (24)

Maximum wind speed, m/s, (mph) 67, (150)

RET

Specifications

AISG Version 1.1 and 2.0


Mechanical

Specifications

Dimensions 249x87.2x230

Weight 7Kg [15.4 lbs.]

RF Connector 7/16 DIN(Female, Long Neck)


Single Band AWS Twin

0


www.kmwcomm.com

[Drawing]

BTS 1 RET BTS 2

ANT 2ANT 1

Single Band AWS Twin

0


www.kmwcomm.com


700MHz Bypass (Both Ports)

Frequency Range, MHz 698 ~ 746MHz

Rejection, dB 80dBc. Min

Insertion Loss, dB 0.2 max

Return Loss, dB 18.0dB. min


PIM @ ANT port 155dBc. min

AWS Up-Link (Both Ports)



Gain 13dB±1dB



Noise Figure, dB @ -40˚C ~ +65˚C 1.6dB. max


Bypass 15.0dB. min



AWS Down-Link

(Both Ports)





PIM @ ANT port 155dBc. min Phase Linearity Variation

(over any 180KHz with in Band pass) 5deg. max


25nS. max


0.2dB. max

Environmental

Specifications






IP Rating IP67



RET

Specifications



Mechanical Dimensions 334x87x230

AWS Twin Dual 700 Bypass

0


www.kmwcomm.com

Specifications Weight 7.9Kg [17.41 lbs.]



[Drawing]

0


www.kmwcomm.com


700M Up Link RX Frequency Range, MHz 698 ~ 716MHz

TX Band Rejection, dB 80dB. Min

Gain, dB 13dB±1dB Bandpass= 15.5MHz, Roll off begins at 699.25 and 714.75MHz

15.5MHz

Filter Rejection @ 697.8MHz 40dB min



Return Loss, dB Normal 18.0dB. min

Bypass 15.0dB. min

Bypass loss, dB 2.6dB. max


700M Down Link

TX Frequency Range, MHz 728 ~ 746MHz




Intermodulation @ antenna ports 155dBc. min Group Delay Variation (over any 180KHz with in Band pass)

50nS. max

AWS Up-Link Frequency Range 1710 ~ 1770MHz


Gain 13dB±1dB



Noise Figure, dB @ -40˚C ~ +65˚C 1.45dB. max(@1MHz Avg.)


Bypass 15.0dB. min



AWS Down-Link






5deg. max


25nS. max


0.2dB. max

Dual Band TMA

0


www.kmwcomm.com

Environmental

Specifications






IP Rating IP67



RET

Specifications



Mechanical

Specifications

Dimensions 320x129x332

Weight 13.5Kg [29.76 lbs.]



0


www.kmwcomm.com

[Drawing]

BTS RET

ANT 1 ANT 2

Dual Band TMA

0


www.kmwcomm.com

Parameter Proposal Specification 700M Bypass Frequency Range 698 ~ 746MHz

Insertion Loss 0.2dB. max Return Loss 18.0dB. min AWS Band Rejection 80.0dB. min Maximum Input Power AVG : 500watt, Peak : 5,000watt PIM @ ANT port 155dBc

AWS Down-Link

Frequency Range 2110 ~ 2170MHz Insertion Loss 0.3 max Return Loss 18.0dB. min Phase Linearity Variation (over any 180KHz with in Band pass)

5deg. max


25nS. max


0.2dB. max

PIM @ ANT port 155dBc. min Maximum Input Power AVG : 500watt, Peak : 5,000watt

AWS Up-Link Frequency Range 1710 ~ 1770MHz Gain 13dB±1dB Bypass Loss 1.60dB. max Return Loss Normal 18.0dB. min

Bypass 15.0dB. min

Noise Figure 1.45dB. max

IIP3 +10dBm. min

Attenuation 2110 ~ 2170MHz 80dBc. min

1700MHz 25dBc. min

1800MHz 25dBc. min

Environmental

Specifications






IP Rating IP67

Wind Load @ 115km/h (Wind Speed) 107N (67m/s)

RET

Specifications



Mechanical

Specifications


Weight 4.5Kg [9.92 lbs.]



Dual Band TMA with 700MHz Bypass

0


www.kmwcomm.com

[Drawing]

174.0 87.0

230.0

0


www.kmwcomm.com


700M Up Link RX Frequency Range, MHz 698 ~ 716MHz


Gain, dB 13dB±1dB Bandpass= 15.5MHz, Roll off begins at 699.25 and 714.75MHz

15.5MHz




Return Loss, dB Normal 18.0dB. min

Bypass 15.0dB. min

Bypass loss, dB 2.4dB. max


700M Down Link

TX Frequency Range, MHz 728 ~ 746MHz





40deg. max


50nS. max


0.3dB. max

Environmental

Specifications






IP Rating IP67



RET

Specifications



Mechanical

Specifications


Weight 17Kg [37.48 lbs.]



Single Band 700 Twin

0


www.kmwcomm.com

[Drawing]

BTS 2

ANT 2ANT 1

BTS 1 RET

0


www.kmwcomm.com

1. Electrical Specifications

Parameter Specification Remark

Frequency 2502~2690MHz

Insertion loss 1.0dB(room temperature)

1.1dB(operating temperature) 2502~2690MHz

Bypass loss Same value of Tx Insertion Loss

Return loss(S11,S22) 16dB min

Ripple +/-0.5dB

Handling

Avg 60W 20W/FA, 3FA, OFDMA(10M)

Peak Power 2KW

PIMD 75dBc (@bypass : 70dBc)

43dBm/tone

Out Band spec

Frequency : 2493MHz

Group delay 300ns max.

Attenuation

0.535~2150MHz 80dB min

2486~2493MHz 30dB min

2705~3300MHz 68dB min

3650~6875MHz 60dB min

10.55~23.6GHz 1dB min

Wide Band TMA

Tx (UL) path

0


www.kmwcomm.com


Frequency 2502~2690MHz

Gain 12dB ~ 14dB Ref. 13dB

Bypass loss Same value of Tx Insertion Loss

Return loss(S11,S22) 15dB min

Ripple +/-0.75dB

OIP3 +33dBm

Noise Figure 2.0dB(room temperature)

2.2dB(operating temperature) 2502~2690MHz

Attenuation

0.535~2150MHz 80dBc min @ Rx Gain Ref 14dB

2486~2493MHz 30dBc min @ Rx Gain Ref 14dB



10.55~23.6GHz 1dB min


RF sync. Det. Operate BTS 0, 1 Envelop detector

DC feeding BTS 0, 1

FSK sync. Det. Operate BTS 0, 1

AISG communication BTS 0, 1

AISG Interface AISG 2.0 2.176MHz OOK

Power Consumption 20W max / 15W type

(+15VDC normal operation) Without RET operation

TDD Sync. Method

(RF is dominant mode operations.

FSK sync. Det. Mode is optional)

RF sync. Detection

Design reference is

Signal BW 10MHz

Frame time 5ms

Symbol 47

CP 1/8

FSK(with AICU to TTLNA)

@provide ref. sync(LVTTL). Is BTS 7.6MHz(DL)/12.3MHz(UL)

Control & Power Part

Rx (UL) path

Wide Band TMA

0


www.kmwcomm.com


Operating TDD sync.

Mode selection of TICU

(used by web GUI)

FSK only mode FSK only present

RF only mode RF only present

FSK dominant RF standby mode FSK & RF present

RF dominant FSK standby mode FSK & RF present

Tx(DL) fixed mode Compulsion mode

Rx(UL) fixed mode Compulsion mode

Operating mode & bypass or different mode change functions description

FSK only mode

Sync. Signal check sequence.

FSK0→FSK1

Changed bypass mode

- LNA fail, TDD S/W fail

- Tx energy detected at Rx time

feedback rotation

bypass fixed & alarm.

Note (1)

RF only mode


RF0 or RF1

Changed bypass mode


Setting for RF sync. Parameters

feedback rotation


Note (2) with TICU(web GUI)

FSK dominant RF standby

mode

[Manufacture Default Mode]


FSK0 or FSK1→RF0 or RF1

Changed bypass mode



Setting for RF sync. Parameters

feedback rotation


Note (1)


RF dominant FSK standby

mode


RF0 or RF1→FSK0 or FSK1

Changed bypass mode



Setting for RF sync. parameters

feedback rotation


Note (1)


Tx(DL) fixed mode Compulsion mode of remotely Bypass and the same

Status.

Rx(UL) fixed mode

Compulsion mode of remotely

(If Tx power is detected in Rx fixed

mode, change into bypass Mode)

Operating TDD sync. Mode selection & control

Wide Band TMA

0


www.kmwcomm.com

< Note > • Tx energy detected at Rx time: FSK sync. Operation only.

(Schottky diode design for) Peak detector using fixed threshold level: TBD; example) 10dBm

• Action for detected over threshold power level is turnaround bypass fixed mode and alarm

(Turnaround bypass fixed mode condition is one time detecting over threshold power)

• Mode recovery is manual remotely re-settable for TICU (using web GUI) • Remotely TTLNA RF sync. mode setting Parameters for TICU.


Signal BW 10M

Frame length(time) 5ms

Symbol count

Total 47

DL 28

UL 19

Cycle prefix 1/8

RTG Full time 60us

Advanced offset 47us

TTG Full time 105.7143us

Delayed offset 50us

Wide Band TMA

0


www.kmwcomm.com

Switching Time & range

Environmental Specifications

Mechanical Specifications


Size [Inch] 17.2 ×7.32 ×2.84 Without BKT

19.4 ×7.32 ×3.67 With BKT

Weight [kg] 7.3 Without BKT

7.6 With BKT

RF Port type DIN 7/16” Female

AISG Port type AISG complaint connector Female


Switching time of RTG, RTG 10us max RTG region is 60us,

TTG region is 105.7143us

BTS provide ref. sync. to TICU

TTLNA switching region

(with switching time)

RTG operating switching time

position & range

TTG operating switching time

position & range

RTG advanced time is (TBD1)us

TTG delayed time is (TBD2)us

Start position (TBD1)us,

range 30us max

Start position (TBD2)us,

range 27us max

Ref. of DL frame start time

Ref. of DL frame end time

TTLNA internal switching time

position offset is

RTG(advanced time)

TTG(delayed time)

47us ± 3us

50us ± 3us

Ref. of DL frame start time

Ref. of DL frame end time


Operating Temperature -40F~125F

Storage Temperature -40F~176F / non-destruction

Relative Humidity 5~100%

Lightning Protection 8/20us, 20kA (Ant., BTS port)

8/20us, 5kA (AISG port)

MTBF 7*105hours min

Sealing Class IP65

Wide Band TMA

0


www.kmwcomm.com

[Mechanical Drawing]

Part Name

14

2

Q'TY1

No.

23

AISG CONNECTORGROUND SCREW

RF Connector (7/16)

2

3

Wide Band TMA

0


www.kmwcomm.com



Input Voltage (from BTS) ±17[V] ~ ±60[V] , TYP ±24 or ±48[V]

Input Protection and Polarity Automatic polarity agile

External fuse / circuit breaker 3[A]

No. of TMA DC output ports 3 port (SMA Female)

Output voltage to TMA 11.5 ~ 14.5 / TYP 13[V]

Output current, max. per port 800[mA] per DC port

DC output protection Automatic short-circuit protection,

Auto recovery. Common for both ports.

Normal current 200 ± 20 mA per DC port

Output current alarm thresholds

A path LNA fail : 260 ± 20 mA per DC port

B path LNA fai : l320 ± 20 mA per DC port

A + B path LNA fail : 380 ± 20 mA per DC port

Alarm Output port (to BTS)

D_SUB 9PIN Female (pin 1,4: Alarm, pin5: GND)

- Normal : open

- alarm : short((LOW)

Power Consumption MAX 2.4[A]


Size, W x H x D (mm) 482.6 x 44 x 224

Weight 1.1 Kg

Color Pantone Cool Gray

DC input connector DFK-MSTB 2,5/2,GF-5,08

DC output connector SMA Female

Alarm output connector D_SUB 9Pin Female

Debug Port USB A TYPE(RS-232)

PAC input connector SMA Female

PAC output connector

Output voltage LED OK : Green / FAIL : RED


Temperature range, full operation -10 to +65

Humidity 5 % to 95 % relative humidity

Ingress protection IP 30

Lightening protection DC output port 1KA, 8/20uS

DC input port 1KA, 8/20uS

EMC and safety approvals EN55022 CLASS A

Power Distributiuon Unit

0


www.kmwcomm.com


Power Distributiuon Unit

0


www.kmwcomm.com

Filter

0


www.kmwcomm.com

Band Edge Rejection Filter to notch out unwanted singals

• Provides a solution to interference on an”as-needed” bases with extremely sharp rejection

• Triple mode Ceramin DR allows the smallest, lightest and lowest product. • Indoor / Outdoor application

Band Rejection Filter

Product Number K09FT165Z

Pass Band RX Path : 698.3 ~ 715.7MHz

TX Path : 728.3 ~ 745.7MHz

Insertion Loss < 0.25dB

Attenuation

@ 696.8 ~ 697.8MHz

@ 716.2 ~ 717.2MHz

> 20.0dB

VSWR < 1.3

Impedance 50Ω

Intermodulation < -160 dBc.

(@RX Band, With Tx Band 2 * 20 W)

Input Power < 100W

Temperature -30 ~ +65

IP Rating IP66

Weight TBD

Connector *Option(N, SMA Available)

Dimension (W×D×H) 270 × 251 × 150 mm

(excluding mounting brackets)

Techinical Specification

0


www.kmwcomm.com

Migration Step Seletable In-Band Co-Siting Solution • Centralized remote migration with no climbing to Tower • No Downtime during migration and push button frequency reconfiguration • Customizable migration step • Lighter & smaller design by using triple mode ceramic DR • CapEx Saving & additional OpEx saving by Antenna line re-use

Big Bang (Multi Step Combiner) 1850~1990MHz

Product Number K09UN131Z

System in Between CDMA LTE

Pass Band

Tx2 f1 – Tx2 f2

(Note1)

Tx2 f2 + 635KHz

~ 1990MHz

Rx : 1850 ~ 1910MHz

Guard Band width 635kHz

Insertion Loss

< 0.8dB

(1.25MHz Avg.)

Typical 0.65dB

< 0.7dB

(1.4MHz Avg.)

Typical 0.6dB

CDMA to LTE Isolation > 30.0dB

Return Loss > 18dB



Input Power < 100W

DC & AISG Path By Pass (path selection available)


IP Rating IP65

Weight < 9.5 Kg

Connector 7-16 Female

Dimension (W×D×H) 220 ×225 × 189 mm



0


www.kmwcomm.com

In-Band Combiner (with 30Mhz Guard Band in between Pass band)

In-band co-siting for UMTS 2100 with Broad Guard Band

• Indoor & outdoor applications • Surge Protection • 150W high power in each pth • CapEx Saving & additional OpE saving by

Antenna line re-use

Product Number KDXCV06180000

Pass Band 15MHz BW RBS System A in UMTS 2100

15MHz BW RBS System B in UMTS 2100

Insertion Loss In Band : 0.4dB

Band Edge : 0.6dB

Return Loss 19dB

Isolation 40dB

Impedance 50Ω



DC path Voltage : 40V, Current : 3A,

DC Resistance : 0.1ohm Max.

Operating Power 150W

Lightning protection Design endurable DC by pass

against Lightning


IP Rating IP65

Weight (without BKT) 7.0 Kg


Dimension (W×D×H) 197x197x100



0


www.kmwcomm.com

In-Band Combiner (with 5Mhz Guard Band in between Pass band)

In-band co-siting for UMTS 2100 with Narrow Guard Band • Indoor & outdoor applications • Surge Protection • 150W high power in each pth • CapEx Saving & additional OpE saving by Antenna

line re-use

Product Number KFTCD00140010

KFTCD00140020

Pass Band 10MHz(15MHz)BW RBS System A

15MHz(10MHz)BW RBS System B

Insertion Loss In Band : 0.7dB

Band Edge : 0.9dB

Return Loss 19dB

Isolation 30dB

Impedance 50Ω



DC path Voltage : 40V, Current : 3A,

DC Resistance : 0.1ohm Max.

Operating Power 160W

Lightning protection 8/20us, 20kA


IP Rating IP65

Weight (without BKT) 10 Kg


Dimension (W×D×H) 255x255x110



0


www.kmwcomm.com

Co-siting & feeder sharing solution for AWS and PCS Wall or pole mounting, DC by pass between all ports Electrical Specifications

Requirements Specifications

PCS AWS

Frequency Range 1850 – 1990 MHz 1710 – 1755MHz 2110 – 2155MHz

Insertion loss 0.3dB Max. 0.2dB Max.

VSWR 1.25 Max.

Isolation to other ports 50dB Min.

Maximum Input Power 250Watts Max. (PCS, AWS Each)

Passive Intermodulation -160dBc Min. (3rd Order, with TX 2 tone x 20W)

DC DC Pass By-pass between all port (Max. 2500mA)

Lightning Protection 3kA (10/350usec)

Impedance 50Ω

Mechanical & Other Specifications


Dimension (W×H×D) (Excluding mounting brackets) 127 x 220 x 55mm

Weight (Excluding mounting brackets) 2.8 Kg [6.2 lbs]

RF Connector 7/16 DIN Female Long Neck

Operating Temperature -40 to +65

Ingress Protection IP66

Mounting Wall & Pole Mount Available

*Specifications are subject to change.

Dual Band Combiner

0


www.kmwcomm.com

[Simulation Data]

[Drawing]

Dual Band Combiner

0


www.kmwcomm.com

Co-siting & feeder sharing solution for AWS and 700MHz Wall or pole mounting, DC by pass between all ports



700MHz AWS

Frequency Range 698 – 894 MHz 1710 – 2170MHz

Insertion loss 0.15dB Max.

Return loss 20dB Min.


Phase Linearity Variation 1degree Max. (over any 180KHz within Band pass)

Group Delay Variation 2ns Max. (over any 180KHz within Band pass)

Maximum Input Power (RMS) 500Watts Max. (700MHz, AWS Each)

Maximum Input Power (PEP) 5000Watts Max. (700MHz, AWS Each)

Passive Intermodulation -155dBc Min. (@RX Band, with TX 2 tone x 20W)

DC

DC Pass Ability to power TMA with bias applied to any port

DC Breakdown 3500Volts

Lightning

Protection 2kA (820usec)

Impedance 50Ω

Mechanical & Other Specifications Requirements Specifications

Dimension (H×D×W) (Excluding mounting brackets) 190 x 135 x 73.5 mm

Weight (Excluding mounting brackets) 2.8 Kg [6.17 lbs.]





Cross Band Coupler

0


www.kmwcomm.com


AW

S

CO

M

700M

Hz

Cross Band Coupler

0


www.kmwcomm.com

Co-siting & feeder sharing solution for AWS and 700MHz

Wall or pole mounting, DC by pass between all ports Available for sniffer port



700MHz AWS










DC



Lightning


Impedance 50Ω


Dimension (H×D×W) (Excluding mounting brackets) 190 x 135 x 73.5 mm



Sniffer Port N type Female (40dB +-4dB)




Cross Band Coupler with Sniffer Port

0


www.kmwcomm.com


AW

S70

0MH

z

CO

MM

ON

Cross Band Coupler with Sniffer Port

0


www.kmwcomm.com

Co-siting & feeder sharing solution for AWS and 700MHz Wall or pole mounting, DC by pass between all ports Available for AISG functionality & sniffer port



700MHz AWS










DC



Lightning


Impedance 50Ω


Dimension (H×D×W)(Excluding mounting brackets) 190 x 145 x 73.5 mm



Sniffer Port N type Female (40dB +-4dB)

RET Port *AISG Compliant (with AISG Functionality only)




*The procedure of the rational interface can be adjusted from AISG1.1 to 3GPP/AISG2.0 and vice versa with Layer 2 / Layer 7 reset commands.

Cross Band Coupler with Sniffer & AISG Port

0


www.kmwcomm.com


RET

AW

S70

0MH

zMO

NC

OM

Cross Band Coupler with Sniffer & AISG Port

www.kmwcomm.com


Accessories

www.kmwcomm.com


Bias-T: KASCT8R80005


Frequency Range 1,710~2,170

Insertion Loss (Max.) 0.3

VSWR (BTS, ANT Port: Max.) 1.22:1

Isolation (RF to DC Path: Min.) 50

PIMD (+43dBm 2tone: Min.) 150c

DC Path Resistance 3.3±10%Ω

Bias Voltage -40V DC~+40V DC

Bias Current (Max.) 0.5A

RF Power (Max.) 54m

Residual Voltage (Max.) 500V(Measured after 5)

Surge Arrestor 8/20

±20

Impedance 50Ω



Connector

BTS (RF) N(M)

ANT (RF/DC) N(F)

DC SMA(F)

Dimension 80.0×34.0×34.0 (W×D×H)

Weight (Max.) 0.6

Operating Temperature -35~+65

Operating Humidity RH 5~90%

Storage Temperature -40~+80

Storage Humidity RH 5~95%

www.kmwcomm.com


Bias-T: KASCT8R80005

[The shape and description of Bias-T KASCT8R80005]

www.kmwcomm.com


Bias-T: KASCTR182034


Frequency Range 1850~1990


Return Loss (BTS, ANT Port: Min.) 28.0






RF Power (Max.) 54m


Surge Attester 8/20

±20

Impedance 50Ω



Connector

BTS(RF) 7/16 DIN(M)

ANT(RF+DC) 7/16 DIN(F)

DC SMA(F)

Dimension() 81.5×34.0×34.0 (W×D×H)

Weight (Max.) 0.6





www.kmwcomm.com



[The shape and description of Bias-T KASCTR182034]

www.kmwcomm.com




Frequency Range 1,850~1990



Isolation (RF to DC Path: Min.) 60.0





RF Power (Max.) 54m


Surge Attester 8/20

±20

Impedance 50Ω



Connector

BTS(RF) 7/16 DIN(F)

ANT(RF/DC) 7/16 DIN(M)

DC SMA(F)

Dimension() 81.5×34.0×34.0 (W×D×H)

Weight (Max.) 0.6





www.kmwcomm.com




www.kmwcomm.com




Frequency Range 1710~2170


VSWR (EQP, ANT Port: Max.) 1.22:1






RF Power (Max.) 54m


Surge Attester 8/20

±20

Impedance 50Ω



Connector

BTS(RF) 7/16 DIN(M)

ANT(RF/DC) 7/16 DIN(F)

DC SMA(F)

Dimension() 81.5×34.0×34.0 (W×D×H)

Weight (Max.) 0.6





www.kmwcomm.com




www.kmwcomm.com




Frequency Range 1,710~2,170



Isolation (RF to DC Path: Min.) 60.0





RF Power (Max.) 54m


Surge Attester 8/20

±20

Impedance 50Ω



Connector

BTS 7/16 DIN(F)

ANT 7/16 DIN(M)

DC SMA(F)

Dimension() 81.5×34.0×34.0 (W×D×H)

Weight (Max.) 0.6





www.kmwcomm.com




www.kmwcomm.com


Conversion BIAS-T(Top) 2496 ~ 2690MHz Block Diagram

Electrical Specification No. Item Specification Remarks

1 Frequency Range 2496 ~ 2690MHz

2 DC Voltage range 10V～30V At BTS Port or RET Port

3 DC Voltage at Non

Feeder Cable Port 0V

When follow the voltage at the other port,

measured at ANT Port.

4 Current Range ≤2.3A BTS Port → RET Port

5 DC Path voltage loss ≤1.2V BTS Port → RET Port When the current is 2.3A, the voltage

loss is ≤1.2V.

6 RF Signal Path Loss 2.0dB, max

@2.176MHz+/-400KHz BTS Port → RET Port

7 RF Signal Path

Return Loss

23dB, min

@2496 ~ 2690MHz BTS Port → ANT Port


@2496 ~ 2690MHz BTS Port → ANT Port

9 RF signal Isolation

≥2.0dB @30~150MHz ANT Port → RET Port and BTS → RET Port.

The open port is terminated with 50oHm during the all

measurement. ≥10.0dB @150~800MHz

≥10.0dB @3000~12750MHz

10 RF Path Power ≤80W BTS Port → ANT Port. PAR=12.0dB, Power 80W and OFDM

signal.

11 Surge Spec. 5 kA（8/20us）

Test Port : RET Port. PAR=12.0dB, Power 80W and OFDM

signal.

20 kA (8/20us) Test Port : ANT Port

RS485/OOK

Modem

ANT

BTS RET

RF signal

OOK signal

RS485 signal

DC signal

www.kmwcomm.com


Conversion BIAS-T(Top) 2496 ~ 2690MHz


Item Specification Remarks

Operating Temperature -49 ~ +149 °F

Operating Humidity (condensing) 5 ~ 100 %

Storage Temperature -49 ~ +185 °F

Storage Humidity (condensing) 5 ~ 100 %

Weather Protection IP 65


Drawing

No. Parameter Spec Comment

1 RF Connector

BTS Port Din Female

ANT Port Din Male

RET Port RET Connector(SU-20SBR-8S)

2 Size 3.35 * 2.70 * 1.49 inch

3 Weight 1.3 pound

www.kmwcomm.com


Conversion BIAS-T(Bottom) 2496 ~ 2690MHz

Block Diagram


No. Item Specification Remarks

1 Frequency Range 2496 ~ 2690MHz

2 DC Voltage range 10V～30V At ANT Port or RET Port

3 DC Voltage at Non

Feeder Cable Port 0V

When follow the voltage at the other port,

measured at BTS Port.

4 Current Range ≤2.3A ANT Port → RET Port

5 DC Path voltage loss ≤1.2V ANT Port → RET Port When the current is 2.3A, the voltage

loss is ≤1.2V.


@2.176MHz+/-400KHz ANT Port → RET Port

7 RF Signal Path

Return Loss

23dB, min

@2496 ~ 2690MHz ANT Port → BTS Port


@2496 ~ 2690MHz ANT Port → BTS Port

9 RF signal Isolation

≥2.0dB @30~150MHz BTS Port → RET Port and ANT → RET Port.


measurement. ≥10.0dB @150~800MHz

≥10.0dB @3000~12750MHz

10 RF Path Power ≤80W ANT Port → BTS Port. PAR=12.0dB, Power 80W and OFDM

signal.

11 Surge Spec. 5 kA（8/20us）

Test Port : RET Port. PAR=12.0dB, Power 80W and OFDM

signal.

20 kA (8/20us) Test Port : ANT Port

RS485/OO

KModem

BTS

ANT RET

RF signal

OOK signal

RS485 signal

DC signal

www.kmwcomm.com


Conversion BIAS-T(Bottom) 2496 ~ 2690MHz



Operating Temperature -49 ~ +149 °F

Operating Humidity (condensing) 5 ~ 100 %

Storage Temperature -49 ~ +185 °F

Storage Humidity (condensing) 5 ~ 100 %



Drawing

No. Parameter Spec Comment

1 RF Connector

BTS Port Din Female

ANT Port Din Female

RET Port RET Connector(SU-20SBR-8S)

2 Size 3.35 * 2.70 * 1.49 inch

3 Weight 1.3 pound

www.kmwcomm.com


Block Diagram

RS485/OOKMODEM

BTS RET

ANT

RF signal

OOK signal

RS485 signal

DC signal

Electric Specification


1 Frequency Range @698 ~ 2170


3 DC Voltage at Non

Feeder Cable Port

0V When follow the voltage at the other port,




loss is ≤1.2V.


@2.176MHz+/-400KHz

ANT Port → RET Port

7 RF Signal Path / R/L 23dB, min@696 ~ 2170 ANT Port → BTS Port


@696 ~ 2170

ANT Port → BTS Port

9 RF signal Isolation ≥2.0dB @30~150MHz BTS Port → RET Port and ANT → RET Port.


measurement.

≥10.0dB @150~800MHz

≥10.0dB @3000~12750MHz

10 RF Path Power 750W ANT Port → BTS Port.

11 Surge Spec. ±5 kA(8/20us) Test Port : RET Port

±3 kA (10/350us) Test Port : ANT Port

12 Intermediation(2×20w) -159dBc IM3


Smart Bias-T (TOP/F/F) [700MHz/AWS]

P/N: KASCTPR82002

www.kmwcomm.com


Environment Specification


Operating Temperature -40 ~ +65 °C

Operating Humidity (condensation) 5 ~ 95 %



Drawing

N O Parameter Spec Comment

1 RF Connector

BTS Port Din Female

ANT Port Din Female

RET Port AISG Circular Female

2 Size (W x D x H) 95.6*67.6*118.3 mm (Including Conn.)

70.0*67.6*41.2 mm (Excluding Conn.)

3 Weight 600 g

www.kmwcomm.com


Block Diagram

RS485/OOKMODEM

BTS RET

ANT

RF signal

OOK signal

RS485 signal

DC signal

Electric Specification




3 DC Voltage at Non

Feeder Cable Port





loss is ≤1.2V.


@2.176MHz+/-400KHz




@696 ~ 2170




measurement.

≥10.0dB @150~800MHz

≥10.0dB @3000~12750MHz






P/N: KASCTPR82003

Smart Bias-T (BOTTOME/F/F) [700MHz/AWS]

www.kmwcomm.com


Environment Specification Item Specification Remarks





Drawing


1 RF Connector

BTS Port Din Female

ANT Port Din Female




3 Weight 600 g

www.kmwcomm.com


Block Diagram

RS485/OOKMODEM

BTS RET

ANT

RF signal

OOK signal

RS485 signal

DC signal




3 DC Voltage at Non

Feeder Cable Port





loss is ≤1.2V.


@2.176MHz+/-400KHz




@696 ~ 2170




measurement.

≥10.0dB @150~800MHz

≥10.0dB @3000~12750MHz






P/N: KASCTPR82004

Smart Bias-T (TOP/F/M) [700MHz/AWS]

www.kmwcomm.com







Drawing


1 RF Connector

BTS Port Din Female

ANT Port Din Male




3 Weight 600 g

www.kmwcomm.com


Block Diagram

RS485/OOKMODEM

BTS RET

ANT

RF signal

OOK signal

RS485 signal

DC signal




3 DC Voltage at Non

Feeder Cable Port





loss is ≤1.2V.


@2.176MHz+/-400KHz




@696 ~ 2170




measurement.

≥10.0dB @150~800MHz

≥10.0dB @3000~12750MHz






P/N: KASCTPR82005

Smart Bias-T (Bottom/F/M) [700MHz/AWS]

www.kmwcomm.com







Drawing


1 RF Connector

BTS Port Din Female

ANT Port Din Male




3 Weight 600 g

www.kmwcomm.com


Block Diagram

RS485/OOKMODEM

BTS RET

ANT

RF signal

OOK signal

RS485 signal

DC signal




3 DC Voltage at Non

Feeder Cable Port





loss is ≤1.2V.


@2.176MHz+/-400KHz




@696 ~ 2170




measurement.

≥10.0dB @150~800MHz

≥10.0dB @3000~12750MHz






P/N: KASCTPR82006

Smart Bias-T (TOP/M/F) [700MHz/AWS]

www.kmwcomm.com







Drawing


1 RF Connector

BTS Port Din Male

ANT Port Din Female




3 Weight 600 g

www.kmwcomm.com


Block Diagram

RS485/OOKMODEM

BTS RET

ANT

RF signal

OOK signal

RS485 signal

DC signal




3 DC Voltage at Non

Feeder Cable Port





loss is ≤1.2V.


@2.176MHz+/-400KHz




@696 ~ 2170




measurement.

≥10.0dB @150~800MHz

≥10.0dB @3000~12750MHz






P/N: KASCTPR82007

Smart Bias-T (Bottom/M/F) [700MHz/AWS]

www.kmwcomm.com







Drawing


1 RF Connector

BTS Port Din Male

ANT Port Din Female




3 Weight 600 g

www.kmwcomm.com


Portable Antenna Controller (PAC) - I


Input Voltage Rechargeable Battery 11.1V(3.7V 3Cell), 1.5AH, Li-Polymer

External Power 19V, 3.68A, AC/DC SMPS Adaptor

Communication protocol RS-232, RS-485/422

Communication speed 19200bps (Max. 115200 bps)



Pin No. Description

1 RS-485B

6 RS-485A

5, 9 Vdc(DC +15V)

4, 8 DC GND

3 RS-485GND

Operating Temperature 32 ∼ 104 F

Operating Humidity 10％ ~ 75％ RH

Storage Temperature -4 ∼ 158 F

Storage Humidity 10％ ~ 75％ RH


Physical Dimension 5.07 x 8.42 x 1.85 inch

Weight 0.75kg [1.65 lbs]

DC +19V INPUT PORT DC Jack Male

RS-232 PORT D-SUB 9PIN FEMALE

RS-485/422 PORT D-SUB 9PIN MALE

D-Sub 9P (RS-485 / 422) Pin Specification

www.kmwcomm.com


Portable Antenna Controller (PAC) - I

[The shape and description of PAC-I]

www.kmwcomm.com


Portable Antenna Controller (PAC) - A


Input Voltage Rechargeable Battery 11.1V(3.7V 3Cell), 1.5AH, Li-Polymer

AC/DC Adaptor 19V, 3.75A(MAX)

Communication protocol RS-232, RS-485/422

Communication bit rate 9600, N, 8, 1

D-Sub 9P (RS-485 / 422) Pin Specification Pin No. Description

1 RS-485B

6 RS-485A

5, 9 Vdc(DC +15V)

4, 8 DC GND

3 RS-485GND




Operating Humidity 10％ ~ 75％ RH

Storage Temperature -4 ∼ 158 F

Storage Humidity 10％ ~ 75％ RH


Physical Dimension 5.07 x 8.42 x 1.85 inch

Weight 0.75kg [1.65 lbs]

DC +19V INPUT PORT DC Jack Male

RS-232 PORT D-SUB 9PIN FEMALE

RS-485/422 PORT D-SUB 9PIN MALE

www.kmwcomm.com


Portable Antenna Controller (PAC) - A

(1) RS-232 Port(3) RS-485

Port

(5) Display Window

(6) Membrane S/W

(7) Power Switch (8) AC/DC AdaptorInput Port

(4)Shoulder strap clamp

PAC-A

[The shape and description of PAC-A]

www.kmwcomm.com


AICM (Air Interface Control Module)


Power supply DC

Power range -48V (-37V ~ -72V)

Current 48V, 300mA, (Normal)

Communication Specification 10/100 Base-T, IEEE 802.3/802.3u Compliant

Communication Protocol TCP/IP, DHCP, UDP


Dimension (H x W x D) 1U (EIA standard) x 482mm x 320mm

Weight ≤ 10Kg (MAX)

Operating Temperature -10 ~ 70

Humidity 5% ~ 95%

Storage Temperature -40 ~ 80

RS-232 Support a debug port

Communication parameter

setting 38400, N, 8, 1


Humidity 5% ~ 95%



Communication parameter

setting 38400, N, 8, 1


Humidity 5% ~ 95%



Communication parameter setting 38400, N, 8, 1


www.kmwcomm.com


AICM (Air Interface Control Module)

AICM Drawing

www.kmwcomm.com


Tower Interface Control Unit (TICU) at BTS

Input voltage range DC: -48V (-36V~-72V)

Current < 4A (- 48VDC standard)

Connectors

6 X QMA (Female type) OOK Signal

12 X SMA (Female type) Coupling Input

1 X SMA (Female type) SYNC Input

Power supply to TTLNA Output voltage : +15VDC

Output current : MAX 2.3A

Protocol to TTLNA 2.176MHz OOK Signal, according to AISG:Issue2.0

Interface to BTS SNMP

Temperature range –22 ~ +140

LED

PWR Input power to TICU

SYNC Status of SYNC Signal

NMS TX Trasmission port for Ethernet

NMS RX Receiving port for Ethernet

α0 Status of Alpha 0 Port (Alarm / Normal)

α1 Status of Alpha 1 Port (Alarm / Normal)

β0 Status of Beta 0 Port (Alarm / Normal)

β1 Status of Beta 1 Port (Alarm / Normal)

γ0 Status of Gamma 0 Port (Alarm / Normal)

γ1 Status of Gamma 1 Port (Alarm / Normal)

Weight < 11 lbs

Dimensions (H x W x D) 1.93 x 18.82 x 8.66 (Inch)

Front panel dimensions (H x W x D) 1.93 x 18.82 x 0.1 (Inch)


www.kmwcomm.com



PORT PROTECT MODE

OOK Signal Port IEC 61000-4-5, Common (± 0 – 1 kV / 8/20 μs)

-48VDC Input Port IEC 61000-4-4, (1kV / Pulse repetition rate: 5kHz)

EMC Specification

IEC 61000-4-2 , LEVEL 4 (Transient / BURST)

Contact discharging ±8KV

Air discharging ±15KV

ESD Specification

EMI Specification IEC 61000-4-6 , (Emission) CLASS A

www.kmwcomm.com



14 6532

[The shape and description of TICU]

www.kmwcomm.com


Adjustable Mounting Clamp


Weight Up kit 7.3lbs [3.3kg]

Down kit 3.8lbs [1.7kg]

Wind load

(max.)

Front / Rear Direction 330lbs [150kgf]

Side Direction 176lbs [80kgf]

Material Stainless Steel

Pole Diameter Ǿ1.96~3.14inch [Ǿ 50~80mm]

Packing Size, W x L x H 10.6 x 15.7 x 0.4 inch

Shipping weight 12.4lbs(5.6kg)

Upper kit

Down kit

www.kmwcomm.com


Adjustable Mounting Clamp

Recommended Torque

240kgf.cm

(M10, 17mm Spanner)

Recommended Torque

120kgf.cm

(M8, 13mm Spanner)

Recommended Torque

120kgf.cm

(M8, 13mm Spanner) Recommended Torque

240kgf.cm

(M10, 17mm Spanner)

KMW Communications Base Station Antennas For...

Documents

Transcript of KMW Communications Base Station Antennas For...