Klippel Analyzer 3 … · · 2017-12-15Available Cards XLR- Card • Dual In&Out XLR channels for...
Transcript of Klippel Analyzer 3 … · · 2017-12-15Available Cards XLR- Card • Dual In&Out XLR channels for...
Design
• Modular, 2HU 19“ design for customized applications
• 16 audio channels each direction with up to 192kHz sample-rate
• Unified platform for RnD and QC
• General Purpose in/outputs for simple interfacing
Product website
2
Available Cards
XLR- Card
• Dual In&Out XLR channels for high performance measurements
Amp-Card
• Stereo class-D power-amplifier
Laser-Card
• Dual Mic + dual Laser channel + monitoring output
Speaker-Card
• Dual Speaker V/I measurement + CTR hardware
3
XLR-Card
4
• Balanced inputs support longercables at higher noise immunity (high CMRR)
• Superb noise and distortioncharacteristics
• SNR can be optimized with multiple gain-stages
• Software and user controlledphantom power
Specification on website
Balanced I/O-Card for Line/Mic aquisition and signal driving
Laser-Card
Unbalanced I/O-Card for displacement- and microphone-sensors
5
• Operating two laser heads at thesame time
• Simplified laser setup withoutexternal power supply
• IEPE sensor detection
• switchable IEPE mic supply
• Software and user controlledmicrophone IEPE supply (7mA)
• Supports Klippel B-Field sensor
Specification on website
Speaker-Card
6
• Two independent speakerchannels
• 500Vpp/160App measurementrange
• Selectable current sensitivity on both channelso hall-sensoro shunt-resistor
• Enables Klippel LSI and CTR applications with integrated signalprocessing
• Long lifetime due to solid-statespeaker relay
Specification on website
Voltage-/Current-measurement and processing card
Amplifier-Card
7
• 105dB SNR, Low-Offset, stereoamplifier
• DC-coupling and software-controlledDC-output
• 2 Ohm load operation
• 45W output power
• dB-Lab integrated health monitoring
• Signal indication
Specification on website
Medium Power stereo Amplifier
Key Features
• Unified platform for QC and RnD applications
• Easy extension due to modular design
• Full compatibility to any PA2 and DA hardware
• Integrated health monitoring and safety functions to increase robustness
• Easy service and maintenance procedure
• Robust hardware (in&out protection, higher temperature range)
• Supports 48/96/192kHz sample rate
• Improved sensitivity
• 24V resistant general purpose I/O connector for simple interfacing
• 16 upstream and 16 downstream audio channels for future applications
• External Power Supply (100-240Vac)
Product website
8