KIT PRODUCT INSTALLATION GUIDE

GU

IDE

Welcome to the Ameren Illinois Energy Efficiency Program SAVE (Safe and Virtual Energy Efficiency) Kit Offering. During this time, we are committed to helping you find ways to improve your comfort, reduce your usage, and manage your costs. Installing these products included in your kit will not only help you save energy, but can help lower your future energy bills.

As an added benefit, Ameren Illinois is offering customers incentives for installing these energy-saving products. Earn your incentive by participating in one of the following three ways:

1 VIRTUALLY ASSISTED INSTALL OPTION — $150 Incentive Check*

2 VERIFIED SELF-INSTALL OPTION — $75 Incentive Check*

3 NON-VERIFIED SELF-INSTALL OPTION — $20 Online Marketplace Coupon*

Before you begin, please check the contents of your SAVE Kit, report any missing or damaged items to 1.866.838.6918. Once you’ve confirmed you have everything, please review the detailed installation options below and choose the one that meets your needs!

WHAT IS IN YOUR SAVE KIT?

*Incentives are available until funds are depleted.

(6) ENERGY STAR® LEDs

(4) ENERGY STAR LED Globes

(2) ENERGY STAR LED Floods

(2) Advanced Power Strips

(1) 1.0 GPM Kitchen Aerator

(1) 1.5 GPM Bath Aerator

(1) ShowerStart TSV Thermostatic Valve

(1) 1.5 GPM Showerhead

(1) 3’ Piece of ½” Pipe Insulation

(2) 3’ Pieces of ¾” Pipe Insulation

(12) Outlet Gaskets and (12) Switch Gaskets

(2) Self-Stick Door Sweeps

(1) Safety Goggles

(1) Pliers

(1) Screwdriver

(1) Plumber’s Tape

1

INSTALLATION OVERVIEW

1 VIRTUALLY ASSISTED INSTALL OPTIONThis option allows you to engage with an Energy Advisor, via the platform of your choice, who will walk you through the installation process. Successful completion of this option entitles you to an incentive of $150!

Call 1.866.838.6918 to schedule your virtually assisted install appointment. • The appointment should last approximately 30-90 minutes, depending on your needs. • You can install some, or all, of the SAVE Kit products prior to your appointment if you are comfortable. • The Energy Advisor will ask for visual proof of the products you installed, if any, during your appointment.Once the appointment is complete and product installation is verified, your $150 incentive check will be mailed to the address associated with your Ameren Illinois account number.

2 VERIFIED SELF-INSTALL OPTIONThis option allows you to install the SAVE Kit products yourself. You will need to participate in a webinar and submit installation photos for verification. Successful completion of this option entitles you to an incentive of $75! Visit AmerenIllinoisSavings.com/SAVE to sign up for a SAVE Virtually Assisted Install Webinar. • The webinar will last approximately 60 minutes. • An Energy Advisor will explain this option in detail, and will answer any of your questions.Using the email address you provided to receive your kit, send photos to verify product installation to IllinoisResidentialEE@ameren.com. The easiest way to submit pictures is to create a photo collage.

Complete the enclosed postcard and mail. • Check all SAVE Kit products you successfully installed in your home. • Return the postage-paid postcard in the mail. Once you participate in the webinar, submit your installation pictures, and your completed postcard is verified, your $75 incentive check will be mailed to the address associated with your Ameren Illinois account number. 3 NON-VERIFIED SELF-INSTALL OPTION We understand you have a lot going on right now, and if neither of the above options described work for you, we will still send you a $20 coupon to our Online Marketplace for returning your completed postcard! Complete the enclosed postcard and mail.

• Check all SAVE Kit products you successfully installed in your home.

• Return the postage-paid postcard in the mail. 2

IPHONE

1 Open the Google Photos app. 2 Create or Sign into your Google Account (Gmail). 3 At the bottom, tap ‘For You’. 4 At the top, tap ‘Collage’. 5 Choose the photos to add to your collage. 6 At the top right, tap ‘Create’.

ANDROID

1 Open the Google Photos app.2 Create or Sign into your Google Account (Gmail).3 At the bottom, tap ‘For You’. 4 Tap ‘Collage’. 5 Choose the photos you want in your collage. 6 At the top right, tap ‘Create’.

COMPUTER

1 Go to photos.google.com. 2 Create or Sign into your Google Account (Gmail).3 On the left, click ‘For You’. 4 Select ‘Collage’. 5 Choose the photos you want to include. 6 At the top, click ‘Create’.

3

ELECTRIC SAVINGS

LED LIGHT BULBSDid you know the average household spends 11% of its energy budget just on lighting? One of the fastest ways to save is by making the switch to ENERGY STAR certified LED specialty light bulbs. They use up to 80% less energy and last up to 25 times longer than conventional incandescent lighting.

HOW TO INSTALL YOUR LED BULBS:1 Turn off the power.2 Allow the bulb to cool.3 Remove the old incandescent bulb.4 Insert the replacement LED bulb.5 Switch on the power.

SIMPLY CONSERVE 7 OUTLET ADVANCED POWER STRIPDid you know that your plugged-in devices are always using energy, even when powered off? Eliminate that excess usage and trim your utility bill with this energy-saving Advanced Power Strip. It works by intelligently cutting off power to connected devices when they’re not in use, eliminating phantom and standby power losses without ever unplugging the equipment.

Load-sensing technology detects the current being drawn through the Master Outlet, which is plugged into a primary device like your TV or computer. Then, peripheral devices like game consoles, DVD players, or monitors are plugged into the Switched Outlets, which only become energized when a high current is detected in the Master Outlet, indicating the TV or computer is powered on. Always-On Outlets provide power at all times, so they can be used for devices that need power constantly, like modems and cable boxes. Stop paying for energy you’re not using and start living more efficiently without making a lifestyle change. Let the Advanced Power Strip do all the work for you!

HOW TO INSTALL YOUR ADVANCED POWER STRIP:

1 Master Outlet Plug in your TV, computer or other primary device. Load-sensing technology will detect the electrical current being drawn through this outlet to activate the switched outlets, 15-18 watts.

2 Switched Outlet Plug in game consoles, DVD players, monitors or other peripheral devices. These only become energized when the primary device (in the Master Outlet) is powered on.

3 Always-On Outlet Plug in any devices that require power at all times, like a modem or cable box. The power supply of these outlets is not dependent on the Master Outlet.

WATER SAVINGS

BATH AND KITCHEN SWIVEL FAUCET AERATORSFaucet aerators mix air into the water, creating a more efficient flow while using less water — saving more than 1,800 gallons per faucet each year.

HOW TO INSTALL YOUR BATH AND KITCHEN SWIVEL AERATORS:* Do not install the aerator if there is corrosion or is not compatible with the existing aerator.

Remove the old aerator by turning counterclockwise. You should first attempt to loosen by hand before using the pliers provided in your kit.

Clean the area thoroughly with a rag.Run the water briefly without the aerator to flush out any debris that could become lodged in the new aerator.Turn off the water and screw on the new aerator by turning it clockwise. Be careful to not over tighten.

SHOWERSTART TSV (THERMOSTATIC VALVE) The ShowerStart TSV allows you to effortlessly save the hot water and energy that’s used while waiting for your shower to become warm. It also lets you know when your shower is ready.

HOW TO USE YOUR SHOWERSTART TSV:Turn on shower. Continue with your normal routine - the things you do while waiting for the shower to become warm.ShowerStart kicks in: when the water reaches 95°F, ShowerStart automatically lowers the flow to a trickle — saving hot water until you’re ready to get in.Ready when you are. You know your shower is warm, so pull the cord to resume full flow and begin showering.

TROUBLESHOOTING:Try pulling the cord. The water may have already been warm or someone may have recently taken a shower. Either of these events may have placed the ShowerStart TSV in trickle mode. If this has happened:

Turn the shower on - the water should be trickling out of the showerhead.Pull the cord to resume normal flow.

If water is not running at full stream, run cold water to reset the TSV and then turn off the shower. Then run shower at desired temperature.

HOW TO INSTALL YOUR SHOWERSTART TSV (THERMOSTATIC VALVE):Remove the existing showerhead.Check for and remove old washers that could be pushed back into the pipe.Tightly wrap the plumber’s tape in a clockwise direction around the threads of the showerhead arm.Hand tighten the ShowerStart TSV onto the showerhead arm in a clockwise direction.Wrap the plumber’s tape in a clockwise direction over the exposed threads on the thermostatic valve as indicated in the preceding step.Hand tighten the new (included) showerhead onto the TSV in a clockwise direction, until the connection is tight with the cord in a downward position.

4

1

1

2

2

3

1

234

12345

6

HIGH PERFORMANCE SHOWERHEAD A high-performance showerhead uses up to 60% less water than a standard showerhead while maintaining a powerful flow, saving water and reducing energy used for heating water.

HOW TO INSTALL YOUR HIGH PERFORMANCE SHOWERHEAD:* If the current showerhead is rusted, corroded, or not compatible, do not install.

Remove existing showerhead with provided channel locks by turning counterclockwise.Using your hands, install the new showerhead onto the shower arm by turning it clockwise, until tightened.Turn on water to make sure there are no water leaks.

Note: If a water leak occurs, use the tape provided in your kit by wrapping around the shower arm clockwise.

WEATHERIZATION SAVINGS

PIPE INSULATION WRAP Insulating your hot water pipes reduces heat loss and can raise water temperature 2°–4°F hotter than uninsulated pipes can deliver, allowing you to lower your water temperature setting. You also won’t have to wait as long for hot water when you turn on a faucet or showerhead, which helps conserve water.

Note: Installing pipe wrap closer than 3” from the flue can be a potential fire concern. Please follow the manufacturer’s installation instructions.

HOW TO INSTALL YOUR PIPE INSULATION WRAP:For best results, determine the diameter of the water pipe and use the appropriate pipe wrap insulation size.Starting at the water heater, measure lengths of insulation needed to cover all accessible hot water pipes, especially the first 3 to 6 feet of pipe from the water heater.It is also a good idea to insulate the cold-water line for the first 3 feet.Cut the insulation to the lengths needed.Place the pipe sleeve so the seam will be face down on the pipe.Use electrical tape or zip ties, every foot, to secure the pipe wrap to the water line.

SWITCH AND OUTLET GASKETS Can you feel cold air coming in through electrical outlets located on exterior walls? This contributes to both heat and energy loss. One of the fastest and most cost-efficient ways to reduce unwanted air flow through these areas is to seal the space between wall outlets and the outside of the home using electrical outlet gaskets.

HOW TO INSTALL YOUR SWITCH AND OUTLET GASKETS:Go to your circuit box and switch off the circuit that services the work area.Remove the screws on the faceplate of the outlet or light switch.Place the gasket and place over the exposed faceplate, lining up the holes so that the sockets are exposed. Replace the outlet cover and screw into place over the newly installed gasket.

5

123

12

345

6

1234

DOOR SWEEPDoor sweeps air seal the gap between the door and the floor. If a door sweep is worn out, air can easily flow through that gap, affecting your home’s energy efficiency.

HOW TO INSTALL YOUR DOOR SWEEP:The door sweeps comes individually packaged with installation instructions.

Cut to size.Peel off the red strip.Stick into place.

MORE WAYS TO SAVE

Questions?Call 1.866.838.6918 or visit AmerenIllinoisSavings.com/SAVE

For privacy information, please visit Ameren.com/Privacy.

Use cold water when using your washing machine. Switching the temperature from hot/warm to cold will cut down on energy use.

Adjust the temperature of your thermostat. Lowering it in the winter and raising it in the summer will reduce your heating and cooling costs.

Check your air filter every month. A dirty filter makes your heating and cooling system work harder.

Make sure you have a full load of dishes in your dishwasher and washing machine before running them. A full machine uses less energy and costs less money.

Switch the direction of your ceiling fans. Use the counterclockwise direction in the summer and the clockwise direction in the winter.

For more home energy savings tips and helpful videos, visit AmerenIllinoisSavings.com/Tips.

6

123