Louis Poulsen Lighting, Inc., 3260 Meridian Parkway, Fort Lauderdale, FL 33331Telephone: (954) 349-2525 Fax: (954) 349-2550 www.louispoulsen.com

Type:

Project:

Catalog Number:

Design: Alfred Homann

Kipp Bollard MH

51.8"

4.5" DIA.

8.4"

17.3" DIA.

11.0"DIA. GROUT (BY 0THERS)

DIE CAST ALUMINUM FRAME WITH NATURAL PAINTED ALUMINUM, OR BLACK POWDER COATED FINISH

INJECTION MOLDED CLEAR U.V. STABILIZED POLYCARBONATE ENCLOSURE

INJECTION MOLDED WHITE OPAL ACRYLIC CONICAL DIFFUSER

MAXIMUM LAMP:1/100W/MH/ED-17/(M-90/M-140)METAL HALIDE(BY OTHERS)

MEDIUM BASE PULSE RATED SOCKET

F-CAN STYLE BALLAST FOR 120/277V OPERATION

3/8" THK X 11" DIA. DIE CAST ALUMINUM BASE PLATE WITH NATURAL PAINTED ALUMINUM, OR BLACK POWDER COATED FINISH AND SECURED WITH THREE 1/2" DIA. X 15" HOT DIP GALVANIZED STEEL ANCHOR BOLTS FOR EMBEDDING IN CONCRETE FOUNDATION AT 120° SPACING ON 7 1/2" DIA. BOLT CIRCLE (CONTACT FACTORY FOR FULL SIZE BOLT LOCATION TEMPLATE)

4.5" DIA. EXTRUDED ALUMINUM POST WITH NATURAL PAINTED ALUMINUM, OR BLACK POWDER COATED FINISH

DIE CAST ALUMINUM TOP SHADE WITH NATURAL PAINTED ALUMINUM, OR BLACK POWDER COATED FINISH, ALL WITH HIGH REFLECTANCE WHITE PAINTED UNDERSIDE. ENTIRE FIXTURE HEAD IS REMOVABLE FOR RELAMPING

The fixture emits symmetrical light directed downward. The relation between the slightlycurved top shade and the angle of the inner opal diffuser ensures a wide non glare light distribution.

Louis Poulsen Lighting, Inc., 3260 Meridian Parkway, Fort Lauderdale, FL 33331Telephone: (954) 349-2525 Fax: (954) 349-2550 www.louispoulsen.com

Kipp Bollard

DesignAlfred Homann

Concept

FinishBlack or natural painted aluminum, powder coated.

MaterialDiffuser: Injection molded white opal acrylic. Top shade: Die cast aluminum. Enclosure: Injectionmolded clear polycarbonate. Frame: Die cast aluminum. Post: Extruded aluminum. Base plate: Die castaluminum.

MountingBase plate dimension: 11” diameter. Base plate: Mounted to a concrete base with 3 anchor bolts.

WeightMax. 41 lbs.

LabelcULus, Wet location. IBEW.

Speci�cation notes:a. CMH and MH variants provided with one 120/277V F-can style ballast.b. LED variants provided with a 120-277V electronic driver.c. All LED wattages are system power.

Info notes:I. The bollard is supplied without basecover.II. The comparable EU version has the following classi�cation: Ingress Protection Code: IP55.III. LED technology is rapidly changing. Speci�cations are based on present technology. For most up to date speci�cations see www.louispoulsen.com.

Product code Dimension Light source Voltage Finish

KIB 51.8” 1/70W/CMH/T-6 G12 120/277V BLK 1/100W/MH/ED-17 medium 120-277V NAT PAINT ALU 35 W LED/3000K

35 W LED/4000K

Photometric Report: KIB-1-100W-MH-ED17.IES Report No.: LP3498 Poulsen Report No.: KIB-1-100W-MH-ED17.IES Luminaire: Kipp Bollard Lamp: 1/100W/MH E cy: 62% Description: All data shown are per 9300 lumens. This report

can be used for calculation on all versions listed below. Use only actual lumen data when calculating.

Candlepower Distribution Zonal Lumen Summary Vertical Angle Candela Zone Lumens % Lamp % Fixture

0 639 0-30 805 8.7 14.0 5 708 0-40 1447 15.6 25.1

10 863 0-60 3051 32.8 52.9 25 1035 0-90 5180 55.7 89.9 40 1030 90-120 564 6.1 9.855 947 90-130 571 6.1 9.970 763 90-150 579 6.2 10.0 85 521 90-180 584 6.3 10.1 90 426 0-180 5764 62.0 100.0

120 12150 7180 2