KIDS Canopy Doll Crib with Baskets -...

Assembly Instructions

Product Dimensions:24” W x 12” D x 31” H

Please take a moment to read through the entire instruction booklet before assembly to familiarize yourself with this product. Once you feel ready to start, follow the instructions step by step and this should make this process as easy as we could make it for you.

If you need help or have damaged or missing parts, contact customer service at www.NaomiHome.com.

of 8

N A O M I

Canopy Doll Crib with Baskets

K I D S

© 2016 Naomi Home Inc. - All Rights Reserved.

Tools Required

Phillips Screwdriver(Medium)

of 8

ADULT ASSEMBLY REQUIREDCHOKING HAZARD• This product includes small parts, sharp points and sharp edges in its unassembled

state. Keep unassembled parts away from children under 3 years of age, & animals.• If used improperly, your doll crib may be pulled over or fall, creating risk of injury or damage. Children should not be permitted to climb or pull on the doll crib.

USE AND MAINTENANCE

• Use on level surfaces only• Because this product needs assembly, it is prone to working itself loose from time to time depending on the use. Please take the time to check that all connections are still tight and working properly for safety.• Only clean using a damp cloth and mild detergent, do not use bleach or abrasive cleaners.

PARENTAL SUPERVISION IS REQUIRED• This Naomi Kids product is intended for child use age 3+.• Parents or Guardians should supervise use under the intended age specifically regarding children that may have access to it and might climb on the unit.

ASSEMBLY RECOMMENDATIONS• Check you have all the components and tools listed on page 2 and 3.• Do not stand or put weight on this product during assembly, this could cause damage.• Remove all hardware from the plastic bags and separate them into their groups.• Assemble the item as close to its final position (in the same room) as possible.• Assemble on a soft level surface to avoid damaging the unit or your floor.• Make sure you have enough space to layout the parts before starting.• Parts of the assembly may be easier with 2 people.• Dispose of all packaging carefully and responsibly.• Do not use this item if any components are missing or damaged.• We do not recommend the use of power drill/drivers for inserting screws, as this could damage the unit. Only use hand screwdrivers.

WARNING CAUTION

Headboardx 1

1

COMPONENT PARTS

Please check that you have all the parts listed below

Crib Railsx 2

Guard Railing

Footboard Canopy

x 2Canopy Rails

x 2

x 1 x 1Canopy Support

Canopy Ties Bedding Baskets

x 1

x 4 x 1 x 2

Crib & StorageBottom Panels

x 2

of 8

Boltx 18

Wood Dowel Pinx 6

ASSEMBLY HARDWARE

1 2 3 4

5 6

BA

7 8

9 10 11

ASSEMBLY INSTRUCTIONS

2

1

Select Headboard – Part 1 and Crib Rail - Part 2. Place Crib Rails with the groove inward. Insert A bolt into bottom hole in headboard. With screwdriver a�x rail to headboard, and repeat for 2nd rail.

Select Guard Rail-ing – Part 3. Place Guard Railings with the groove inward and on the bottom. Insert A bolts into head-board. With screwdriver a�x guard rail to head-board and repeat for 2nd guard rail.

of 8

1

A

A 2

2

A

A

A

33A


4

3

Select Canopy Rail - Part 4. Insert B wood dowel pin into top hole in canopy rail – on both ends. Insert A bolt into head-board bottom hole and with screwdriver a�x canopy rail to headboard.

Select Canopy Sup-port - Part 5. Insert B wood dowel pin into bottom hole in part 5 – on both ends. Insert A bolt into canopy rail top hole and with screwdriver a�x canopy support to canopy rail.

of 8

A

BB 5

AB

B4


6

5

Select Canopy Rail - Part 4. Insert B wood dowel pin into top hole on ends of canopy rail. Align B in 5 with hole in 4, and insert end B pin into 1. Insert A into 4 and tighten. Insert A into 1 and a�x canopy rail 4 to headboard 1.

Select part 6. With painted side up, slide part 6 into groove of lower rail on crib guard rails part 3 and repeat with 2nd panel part 6 into crib rails part 2.

of 8

A

AB

B4

6

6


8

7

Select part 7 - Footboard. Align 7 to the wood pins B in canopy, crib & guard rails and insert. Insert A bolt into part 7 and a�x to canopy rails, crib guard rails and crib rails. Tighten all bolts.

Select part 8 & 9. With the sewn side down, drape canopy over canopy support and rails. Tie canopy to bed posts on head-board and footboard with canopy ties 9. Place 10 in crib & tie to posts and rails. Figure A ~ Insert basket support card into bottom basket 11. Place 11 (x2) on 6.

of 8

9

8

10

99

9

1111

7

A

A

A

A

A

A A

A

Fig. A

ASSEMBLY COMPLETE

of 8

www.NaomiHome.comMADE IN CHINA

Product Packaging Information

Model #:

Color:

Shipment Ref. #:

Date:

________________________________

__________________________________

_________________________

__________________________________

CONGRATULATIONS, YOUR NAOMI KIDSCANOPY DOLL CRIB WITH BASKETS IS COMPLETE!

N A O M IK I D S

KIDS Canopy Doll Crib with Baskets -...

Documents

Transcript of KIDS Canopy Doll Crib with Baskets -...