KIA KIT KIA KIT NSA INDUSTRIES - Asset Sales Final.pdf · MODEL GT27 CNC GANG ... C Collet Chuck,...
Transcript of KIA KIT KIA KIT NSA INDUSTRIES - Asset Sales Final.pdf · MODEL GT27 CNC GANG ... C Collet Chuck,...
Corporate Headquarters
301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079
Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325
www.asset-sales.com [email protected]
Asset Sales (Canada) Inc.
4310 Prospect Road
Bayside, Nova Scotia, Canada B3Z1L5
Tel 902.852.5331 Fax 704.821.4325
Asset Sales, Inc.
<
(2) CMS
MODEL GT27
CNC GANG
STYLE LATHE
FARRELL 10” VERTICAL BORING MILL
NSA INDUSTRIES CNC MACHINERY
8 MEADOW ROAD – SPENCER, MA 01562 BIDDING CLOSES THURSDAY, JUNE 6TH @ 1:00 P.M. EDT
1 OF 2
>
PANASONIC
MODEL YA-1 GMR81 6-AXIS
ROBOT WELDING CELL
1990 2011
European Headquarters
P.O. Box 819, Halifax HX1 9QQ UK
Tel / Fax 07836.347880
Inspection:
WEDNESDAY,
JUNE 5TH
From 8:00 A.M. –
4:00 P.M. EDT
FORMER ASSETS OF
LATHES KIA KIT Model 30A Gantry Type CNC Lathe with Max Swing 18.9”, X-Axis Stroke
13.7”, Z-Axis Stroke 13.7”, Bar Capacity 1.5”, Standard Machining Diameter 5.9”,
Maximum Machining Length 5.9”, Speeds 50 – 5000 RPM, Motor Power 10HP, 6”
Chuck, Fanuc O-T CNC Control, sn:30447, mfg:1994
KIA KIT Model 30A Gang Type CNC Lathe with Maximum Swing 18.9”, X-Axis
Stroke 13.7”, Z-Axis Stroke 9.8”, Bar Capacity 1.5”, Standard Machining Diameter
5.9”, Maximum Machining Length 5.9”, Speeds 50 – 5000 RPM, Motor Power 10HP,
5C Collet Chuck, Fanuc O-Mate CNC Control, sn:30154, mfg:1992
KIA KIT Model 30B Gang Type CNC Lathe with Maximum Swing 18.9”, X-Axis
Stroke 15.7”, Z-Axis Stroke 9.8”, Bar Capacity 1.5”, Standard Machining Diameter
5.9”, Speeds 50 – 5000 RPM, Motor Power 10HP, 6” 3-Jaw Hydraulic Power Chuck,
Yasnac LG-3 CNC Control, sn:30377, mfg:1997
(2) CMS (Compact Manufacturing Systems) Model GT27 CNC Gang Style Lathe
with Maximum Bar Capacity 1”, Maximum Turning Length 8”, Maximum Turning
Diameter 10”, Maximum Swing Over Ways 13”, Spindle Speeds 6,000 RPM, Spindle
Motor 5HP, X-Axis Travel 11.75”, Z-Axis Travel 7.5”, Fagor 8050/55-T CNC Control,
5C Collet Chuck, sn:FB2926165 & FEK292544S, mfg:2001
SOUTHBEND Model Fourteen 14” x 40” Engine Lathe with Swing Over Bed
14.125”, Swing Over Cross Slide 8.25”, Center Distance 40”, D1-4 Spindle Nose,
Spindle Bore 1.5625, Spindle Speeds (Variable) 50 – 1,800 RPM, Spindle Motor
3HP, Inch Treading, 8” 3-Jaw Chuck, Steady Rest, Taper Attachment, Coolant
sn:00018TT, mfg:1978
MACHINING CENTERS DAEWOO Model ACE-V30 Vertical Machining Center with Auto-Dual Type Table
(APC), X-Axis Travel 20.1”, Y-Axis Travel 11.8”, Z-Axis Travel 15.8”, Table Size
24.8” x 15.8” (indexes 180°), Maximum Table Load 440lbs, Motor Power 7.5HP,
Spindle Taper CT-40, Spindle Speeds 45 – 6,000 RPM, ATC Size 12 Positions,
Fanuc O-M CNC Control, sn:410209, mfg:1991
KIA Model KV40A Vertical Machining Center with Table Size 35” x 16”, X-Axis
Stroke 22.4”, Y-Axis Stroke 16”, Z-Axis Stroke 18”, Spindle Speeds 50 – 6,000
RPM, Main Motor 7.5HP, Spindle Taper CT-40, Maximum Table Load 660lbs, ATC
20 Positions, Fanuc OM-B CNC Control, sn:94077, mfg:1989
TURNING CENTER HANWHA Model SL32HPD 9-Axis Swiss Style Turning Center with, Maximum Bar
Capacity 1.250”, Main Spindle 300 – 8000 RPM with C-Axis, Main Spindle 7.5 HP,
Sub Spindle 300 – 8000 RPM with C-Axis, Sub Spindle 5.5HP, (5) Turning Stations,
(4) Cross Drilling Stations 200 – 4,000 RPM (1.5 HP), (9) Front Positions, (4) Back
Positions, Fanuc 16iTB 9-Axis CNC Control, MTA Eagle 545 12’ Hydrodynamic
Barfeeder, Chip Conveyor, JBS Guide Bushing, sn:SL-32-B4-1059, mfg:2005
SPACESAVER SMW Model Spacesaver 6.80 (Sameca MUZ.5.6) Automatic Short Bar Feeder with
Diameter Range 3/16” – 2-1/2”, Bar Length 48”, Loading Capacity 2-1/2” x 6 Bars,
sn:608, mfg:1995
WELDING CELL PANASONIC Model YA-1 GMR81 6-Axis Rotor Welding Cell with Axes 6, Payload 8
kg., H-Reach 1574 mm, Repeatability +/- 0.1 mm, Robot Mass 220 kg., Mounting –
Floor, Robot Motion Range Axis-1 +/- 155°, Axis-2 + 150° / -100°, Axis-3 +270° / -
190°, Axis-4 +/- 270°, Axis-5 +100° / 150°, Axis-6 +/- 400°, Manipulator Model VR-
008AU II, (Performarc PA-125 Work Cell Equipped with 60” Dia. Turntable with (2)
36” x 72” Sub-Tables, 200lb Work Load, 80” W x 180”L x 92” H), Panasonic WX300
TIG Welder (30 AMP), Binzel WK23 Coolant Recirculator, Operator Control Station
and PLC, mfg:1999
CHECK DATE AND ADDRESS
KIA KIT MODEL 30B GANG TYPE CNC LATHE HANWHA MODEL SL32HPD 9-AXIS SWISS STYLE TURNING CENTER
1 of 2 2001
2005
2
ONLINE AUCTION SALE DATE & TIME – BIDDING CLOSES THURSDAY, JUNE 6TH @ 1:00 P.M. EDT
LOCATED
IN NC EXCELLENT
Visit Our Website to View a Calendar of Upcoming Auctions!
While You’re There, Join Our Mailing List and Receive Email
Notifications of Future Sales!
WWW.ASSET-SALES.COM
2005 2005 68
HOURS
<
SUPERMAX
MODEL MAX 1
REBEL
CNC VERTICAL
MACHINING
CENTER
>
SUPERMAX YCI
MODEL MAX 1
CNC VERTICAL
MACHINING
CENTER
<
SUPERMAX YCI
MODEL MAX 1
CNC VERTICAL
MACHINING
CENTER
<
SUPERMAX YCM
MODEL TC-2 CNC
TURNING CENTER
>
SUPERMAX YCM
MODEL TC-2 CNC
TURNING
CENTER
<
MORI-SEIKI
MODEL
SL-25A CNC
TURNING
CENTER
<
SMW
INDEXER
W/ 4TH AXIS
SYSTEM 50
KIA KIT MODEL 30A GANG TYPE CNC LATHE
<
(2) ORION
MODEL DC-34A
WHEEL DRESSING
MACHINES
SOUTHBEND MODEL FOURTEEN 14” X 40” ENGINE LATHE
<
HOFLER MODEL H1002
GEAR GRINDER
LATHES KIA KIT Model 30A Gang Type CNC Lathe with Max Swing 18.9”, X-Axis Stroke 13.7”, Z-
Axis Stroke 9.8”, Bar Capacity 1.5”, Standard Machining Diameter 5.9”, Maximum Machining
Length 5.9”, Speeds 50 – 5000 RPM, Motor Power 10HP, 6” Chuck, Fanuc O-T CNC
Control, sn:30447, mfg:1994
KIA KIT Model 30A Gang Type CNC Lathe with Maximum Swing 18.9”, X-Axis Stroke 13.7”,
Z-Axis Stroke 9.8”, Bar Capacity 1.5”, Standard Machining Diameter 5.9”, Maximum
Machining Length 5.9”, Speeds 50 – 5000 RPM, Motor Power 10HP, 5C Collet Chuck,
Fanuc O-Mate CNC Control, sn:30154, mfg:1992
KIA KIT Model 30B Gang Type CNC Lathe with Maximum Swing 18.9”, X-Axis Stroke 15.7”,
Z-Axis Stroke 9.8”, Bar Capacity 1.5”, Standard Machining Diameter 5.9”, Speeds 50 – 5000
RPM, Motor Power 10HP, 6” 3-Jaw Hydraulic Power Chuck, Yasnac LG-3 CNC Control,
sn:30377, mfg:1997
(2) CMS (Compact Manufacturing Systems) Model GT27 CNC Gang Style Lathe with
Maximum Bar Capacity 1”, Maximum Turning Length 8”, Maximum Turning Diameter 10”,
Maximum Swing Over Ways 13”, Spindle Speeds 6,000 RPM, Spindle Motor 5HP, X-Axis
Travel 11.75”, Z-Axis Travel 7.5”, Fagor 8050/55-T CNC Control, 5C Collet Chuck,
sn:FB2926165 & FEK292544S, mfg:2001
SOUTHBEND Model Fourteen 14” x 40” Engine Lathe with Swing Over Bed 14.125”, Swing
Over Cross Slide 8.25”, Center Distance 40”, D1-4 Spindle Nose, Spindle Bore 1.5625,
Spindle Speeds (Variable) 50 – 1,800 RPM, Spindle Motor 3HP, Inch Treading, 8” 3-Jaw
Chuck, Steady Rest, Taper Attachment, Coolant sn:00018TT, mfg:1978
>
(2) CMS MODEL
GT27 CNC GANG
STYLE LATHE
LOCATED
IN NC Want to Sell Your Shop or Know Someone Who Does? Call
Us Toll Free at (888) 800-4442! We Pay Great Finder’s Fees!
KIA KIT MODEL 30A GANG TYPE CNC LATHE
<
KIA KIT MODEL
30B GANG TYPE
CNC LATHE
1 of 2 2001
3
INSPECTION – WEDNESDAY, JUNE 5TH FROM 8:00 A.M. – 4:00 P.M. EDT
ABBREVIATED TERMS & CONDITIONS OF AUCTION Your participation and bidding are
considered a legally binding contract – It is
prohibited to bid on any item that you
cannot pay for in full by the specified date
or remove by designated date. Subject to amendments and modifications announced by
Asset Sales, Inc. and Bidspotter at the time of the auction,
any person participating in the webcast auction will be
bound by the following terms and conditions. Neither
Asset Sales, Inc. nor Bidspotter warrant the accuracy,
authenticity, description, weight, count or measure of any
listings specified herein.
All articles will be sold to the highest webcast bidder
conforming to the bid process in accordance to the
AUCTION COMPANY’S TERMS & CONDITIONS –
COMPLETE COPIES AVAILABLE AT WWW.ASSET-
SALES.COM. No article shall be removed unless paid in full
and all articles purchased shall be removed in the time
allocated by Asset Sales, Inc.. No item, no matter how
small or how far the purchaser has to travel, may be
removed until after the online auction is completely closed.
All payments shall be by wire transfer. All bidding and
invoicing will be in US Dollars ($). All bidders are
responsible for all applicable taxes, in addition a 16%
Buyer’s Premium is implemented for all online sales.
Rigging/ Removal of sold equipment is the sole
responsibility of the buyer and must be completed by the
posted date. Rigging/Removal may not begin until payment
has been made in full and the auction sale is complete. All
heavy rigging will require a certificate of insurance for
$1,000,000.00 naming Asset Sales, Inc. as the insured.
ALL ONLINE SALES ARE FINAL, ON AN “AS IS – WHERE
IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS.
REGISTRATION & BIDDING ONLINE:
When participating as a buyer via Bidspotter.com, you
must be pre-approved by Asset Sales, Inc. The pre-
approval process is easy, but necessary. Asset Sales, Inc.
will verify telephone number and confirm agreement to the
Terms and Conditions.
Anyone outside of the continental United States will be
required to wire transfer a minimum deposit of $5000 to be
approved for all non-onsite bidding.
2010
2010
2005
<
HANWHA
MODEL SL32HPD
9-AXIS SWISS
STYLE TURNING
CENTER
PANASONIC MODEL YA-1 GMR81 6-AXIS ROBOT WELDING CELL
WWW.ASSET-SALES.COM
MACHINING CENTERS DAEWOO Model ACE-V30 Vertical Machining Center with
Auto-Dual Type Table (APC), X-Axis Travel 20.1”, Y-Axis
Travel 11.8”, Z-Axis Travel 15.8”, Table Size 24.8” x 15.8”
(indexes 180°), Maximum Table Load 440lbs, Motor Power
7.5HP, Spindle Taper CT-40, Spindle Speeds 45 – 6,000
RPM, ATC Size 12 Positions, Fanuc O-M CNC Control,
sn:410209, mfg:1991
KIA Model KV40A Vertical Machining Center with Table Size
35” x 16”, X-Axis Stroke 22.4”, Y-Axis Stroke 16”, Z-Axis
Stroke 18”, Spindle Speeds 50 – 6,000 RPM, Main Motor
7.5HP, Spindle Taper CT-40, Maximum Table Load 660lbs,
ATC 20 Positions, Fanuc OM-B CNC Control, sn:94077,
mfg:1989
TURNING CENTER HANWHA Model SL32HPD 9-Axis Swiss Style Turning
Center with, Maximum Bar Capacity 1.250”, Main Spindle
300 – 8000 RPM with C-Axis, Main Spindle 7.5 HP, Sub
Spindle 300 – 8000 RPM with C-Axis, Sub Spindle 5.5HP,
(5) Turning Stations, (4) Cross Drilling Stations 200 – 4,000
RPM (1.5 HP), (9) Front Positions, (4) Back Positions, Fanuc
16iTB 9-Axis CNC Control, MTA Eagle 545 12’
Hydrodynamic Barfeeder, Chip Conveyor, JBS Guide
Bushing, sn:SL-32-B4-1059, mfg:2005
SPACESAVER SMW Model Spacesaver 6.80 (Sameca MUZ.5.6) Automatic
Short Bar Feeder with Diameter Range 3/16” – 2-1/2”, Bar
Length 48”, Loading Capacity 2-1/2” x 6 Bars, sn:608,
mfg:1995
WELDING CELL PANASONIC Model YA-1 GMR81 6-Axis Robot Welding Cell
with Payload 8 kg., H-Reach 1574 mm, Repeatability +/- 0.1
mm, Robot Mass 220 kg., Mounting – Floor, Robot Motion
Range Axis-1 +/- 155°, Axis-2 + 150° / -100°, Axis-3 +270° /
- 190°, Axis-4 +/- 270°, Axis-5 +100° / -150°, Axis-6 +/-
400°, Manipulator Model VR-008AU II, (Performarc PA-125
Work Cell Equipped with 60” Dia. Turntable with (2) 36” x 72”
Sub-Tables, 200lb Work Load, 80” W x 180”L x 92” H),
Panasonic WX300 TIG Welder (30 AMP), Binzel WK23
Coolant Recirculator, Operator Control Station and PLC,
mfg:1999
2005
2005
What to Bid in this
Auction? Visit
www.asset-sales.com
Visit Our Website to See
Upcoming Auctions & Join Our
Mailing List
www.asset-sales.com
>
DAEWOO
MODEL
ACE-V30
VERTICAL
MACHINING
CENTER
SMW MODEL SPACESAVER 6.80 AUTOMATIC
SHORT BAR FEEDER
KIA MODEL KV40A VERTICAL MACHINING CENTER
HOTEL
Street Address
City, State Zip Code
Telephone Number
“LYNYRD SKYNYRD”
MILWAUKEE IRON STREET SURVIVOR
Corporate Headquarters 301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079 Toll Free: 888.800.4442 Direct: 704.821.4315
Fax: 704.821.4325 – www.asset-sales.com Asset Sales, Inc. – Massachusetts License Number AU2461
Want to join our mailing list? Want to be included in
Email Blasts announcing future auctions? Want to
update your address? Curious to preview machines and
tooling featured in an upcoming auction? Want to
request a brochure? Or want to be removed from our
mailing list?
Just write the info on the back cover of this
brochure and email or fax it to us at:
[email protected] or (704) 821-4325
Visit our website at www.asset-sales.com to view all of our
Upcoming Auctions, Download Complete Brochures, or to
Register to Bid Online.
Asset Sales, Inc.
ONLINE AUCTION NSA INDUSTRIES
CNC Machinery
SPENCER, MA
BIDDING CLOSES
THURSDAY, JUNE 6TH @ 1:00 P.M. EDT
COMFORT INN & SUITES
215 Charlton Road (US20)
Sturbridge, MA 01566
(508) 347-3306
3 AVAILABLE
HURCO MODEL VM1 CNC VERTICAL MACHINING CENTER
2005
HAMPTON INN
328 Main Street
Sturbridge, MA 01566
(508) 347-6466
CLARK MODEL C500 S100 FORKLIFT 6,000LB CAPACITY
UPCOMING AUCTIONS THURSDAY, DECEMBER 13TH
CORNERSTONE CNC MACHINING Very Late Model & High End Aerospace CNC & Fab Facility
Vista, CA
DIRECTIONS: From I-90 Mass Pike. Take Exit 9 for
I-84 West. Take exit 3A for US-20 East. Turn Left
onto MA-49 North for 7 miles. At end of road turn
right onto Route 9 East for approx .4 miles. Turn left
on Meadow Road, Building will be first building on
the right after the cemetery. Follow auction signs.
HOTELS
TOOL GRINDER BOYAR-SCHULTZ Manual Tool Grinder with (6) Twelve Deluxe 6” x 12”
Reciprocating Surface Grinder, Magnetic Chuck AC/DC Minatron Chuck
Control
ENGINE LATHE SUPERMAX Y.C.I. Model LE-1338 Manual Engine Lathe with Tailstock,
Super Quick Change Tool Post, 35-1255 RPM, Threading, Inch/Metric, 13”
Swing Over Bed x 38” cc, Chip Pan, Mitutoya 2-Axis DRO, 6” 3-Jaw
Chuck, sn:I7812-713, mfg.1990
VERTICAL MILLING MACHINE SHARP Manual Vertical Milling Machine with 9” x 42” T-Slotted Table,
Variable Speed, 60-4500 RPM, 3HP, Collet Stand, Table Power Feed,
Acurite Mill Mate 2-Axis, sn:10917702
VIBRATORY FINISHER CHIRON Model UB-3 International Vibratory Finisher with Round Style-
Trough Feed, Good Liner and Media, 40” Diameter with PowerFLex Motor
Control (1/4 Media-Ceramic), sn:UB000162
48” Diameter Round Style Vibratory Finisher with Media and Good Liner
(3/8” Ceramic Media)
HORIZONTAL PISTON STYLE AIR COMPRESSOR LMC NATIONAL BD & MANUFACTURING Horizontal Piston Style Air
Compressor with 10-HP Motor, 1760 RPM with New Belts
VERTICAL BAND SAW MANHATTAN Model 951467 Industrial Vertical Bandsaw with Welding
Attachment, Work Light, 181” Long Blade, 78” Solid Table with 39” Extra
Long Throat, sn:10908
HORIZONTAL BANDSAW KALAMAZOO Model H9AW Horizontal Bandsaw with 18” Wide x 9-1/2”
High Capacity, 32” Table, sn:K20574
CNC VERTICAL MACHINING CENTER SUPERMAX Model MAX 1 Rebel CNC Vertical Machining Center with
33.1” x 16-1/2” T-Slotted Table, X-Travel 25.59”, Y-15.7”, Z-18.1”, 40
Spindle Taper Mitsubishi CNC Control, 45-6,000 RPMs, 10-HP, Coolant,
2-Speed Gear Box, Rapid Traverse, 16 ATC, sn:609484
SUPERMAX YCI Model MAX 1 CNC Vertical Machining Center with 15
HP, 33.1” x 16.5” T-Slotted Table, X-Travel 25.59”, Y-16.1”, Z-18.1”, 40
Spindle Taper, 45-10,000 RPM, Fanuc Series O-M CNC Control, Coolant
System, Rapid Travers, 24 Side Mount ATC with Spindle Oil Cooler,
sn:603335
SUPERMAX YCI Model MAX 1 CNC Vertical Machining Center with 15
HP, 40 Taper, 33.1” x 16.5” T-Slotted Table, X-Travel 25.59”, Y-16.1”, Z-
18.1”, 40 Spindle Taper, 45-6,000 RPM, Fanuc Series O-M CNC Control,
Coolant System, Rapid Travers, 24 Side Mount ATC with Chip Conveyor,
sn:604345
CNC TURNING CENTERS SUPERMAX YCM Model TC-2 CNC Turning Center with 18.9” Swing
Over Bed x 12.2” Swing Over Carriage, Collet Chuck, X-Travel 5.9”, Z-
Travel 19.7”, Maximum Turning Diameter 9.8”, 10 HP, Single Turret 8
Tools, 40 - 4,000 RPM, Hollow Type Chip Conveyor, Bar Capacity 2.04”,
Fanuc O-T CNC Control, Coolant, sn:505310, mfg.1995
SUPERMAX YCM Model TC-2 CNC Turning Center with 12.2” Swing
Over Bed, X-Travel 5.9”, Z-Travel 19.7”, Maximum Turning Diameter 9.8”,
Single Turret 8 Tools, 10 HP, 40 - 4,000 RPM, 2.04” Bar Capacity, Fanuc
O-T Control, Collet Chuck, Coolant, Chip Conveyor, sn:804036
(2) 6” 3-Jaw Chuck
(1) 7” 3-Jaw Chuck
MORISEIKI Model SL-25A CNC Turning Center with 20.5”/13.8” Swing
Over Bed Carriage, Tail Stock, Collet Closure, Probe, Single Turret 8
Tools, 25/20 HP, Coolant with 8-1/4” 3-Jaw Chuck, 35-3,500 RPM, X-
Travel 6.3”, Z-Travel 23.2”, Fanuc 10T CNC Control, sn:1138
4TH AXIS INDEXER SMW Indexer with 4th Axis System 50, sn:971230
ARBOR PRESS DAKE ARBOR Model 1-1/2 Floor Type Press
STEEL RACK CANTILEVER Steel Rack
CABINETS (2) 7 Drawer VIDMAR Cabinets
(2) 6 Drawer VIDMAR Cabinets
AMERICAN METROLOGY 36” x 48” Black Granite Plate / Single Level
with Mobile Cart
DRILL PRESS LELAND GIFFORD Drill Press with 3 Manual Head, 11” x 26-1/2” Table
Work Surface, Floor Type
TOOLING 40 Taper Tool Holders with Cart
PUNCH – SHEET METAL FABRICATOR STRIPPIT Model 15B 25 Ton Capacity Sheet Metal Fabricator with 16” x
32” Table, sn:25732365
MISCELLANEOUS (4) 6” Kurt Vises
KIA KIT MODEL 30A GANG TYPE CNC LATHE
ABBREVIATED TERMS & CONDITIONS OF AUCTION Your participation and bidding are considered a
legally binding contract – It is prohibited to bid on
any item that you cannot pay for in full by the
specified date or remove by designated date. Subject to amendments and modifications announced by
Asset Sales, Inc. and Bidspotter at the time of the auction,
any person participating in the webcast auction will be
bound by the following terms and conditions. Neither Asset
Sales, Inc. nor Bidspotter warrant the accuracy,
authenticity, description, weight, count or measure of any
listings specified herein.
All articles will be sold to the highest webcast bidder
conforming to the bid process in accordance to the
AUCTION COMPANY’S TERMS & CONDITIONS –
COMPLETE COPIES AVAILABLE AT WWW.ASSET-
SALES.COM. No article shall be removed unless paid in
full and all articles purchased shall be removed in the time
allocated by Asset Sales, Inc.. No item, no matter how
small or how far the purchaser has to travel, may be
removed until after the online auction is completely closed.
All payments shall be by wire transfer. All bidding and
invoicing will be in US Dollars ($). All bidders are
responsible for all applicable taxes, in addition a 16%
Buyer’s Premium is implemented for all online sales.
Rigging/ Removal of sold equipment is the sole
responsibility of the buyer and must be completed by the
posted date. Rigging/Removal may not begin until
payment has been made in full and the auction sale is
complete. All heavy rigging will require a certificate of
insurance for $1,000,000.00 naming Asset Sales, Inc. as
the insured.
ALL ONLINE SALES ARE FINAL, ON AN “AS IS – WHERE
IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS.
REGISTRATION & BIDDING ONLINE:
When participating as a buyer via Bidspotter.com, you must
be pre-approved by Asset Sales, Inc. The pre-approval
process is easy, but necessary. Asset Sales, Inc. will verify
telephone number and confirm agreement to the Terms
and Conditions.
Anyone outside of the continental United States will be
required to wire transfer a minimum deposit of $5000 to be
approved.
UPCOMING AUCTIONS THURSDAY, MAY 23rd – Whitehall Machinery
Strip Fabrication Equipment
Onsite & Online thru Bidspotter
Dahlonega, GA
WEDNESDAY, MAY 29th – Gear & Heavy Machining Facility
Online thru Bidspotter
Lufkin, TX
THURSDAY, MAY 30th – Meat Processing Facility
Late Model Meat Processing Facility
Bidding thru www.corpassets.com
Forest City, NC
THURSDAY, JUNE 13th – ACAS
CNC & Air Craft Machinery
Onsite & Online thru Bidspotter
Marion, SC
Former Assets of