Frank Kern Reviews | Check out these Frank Kern Testimonials.
Kern envelope sealing control kernMail Control system for … · 2021. 1. 21. · can be used with...
1
kernMail or more sectors (ROI = Region Of Inter- ests) on the envelope can be modelled in the software and evaluated with a sensitivity that can also be set. Depending on the analysis result, when a threshold value is reached, the decision is made whether or not to divert out the envelope. The e sealing control for envelopes can be used with the Kern 3500 (SL) and Kern 3600 inserting systems, other systems on request. For this purpose, the envelope is uni- formly illuminated by means of an LED light band and then images at a suitable angle with a wide-angle camera. The software can evaluate shadow areas that inevitably occur due to an incorrectly closed envelope flap. Since the relevance of a non-sealed area depends on the type of application (pay slips must be completely closed right up to the edge, info letters on the other hand, may have tolerances), one Features ■ Length: 1150 mm ■ Height: 860 mm ■ Width: 340 mm ■ Simple operation Our Services ■ Personal consultancy on-site ■ Requirement analysis, and solution proposal according to customer needs ■ Installation by Kern AG ■ System integration ■ On-site training of your employees ■ Reliable support and maintenance during operation ■ Customer-oriented service models The module verifies whether the flap of an envelope has been properly glued or whether there are open areas. Kern envelope sealing control Control system for envelopes Kern AG 3510 Konolfingen Switzerland Phone +41 31 790 35 35 [email protected] www.kernworld.com June 2020 _ V1 _ The specifications are not contractually regulated and may change without further notice.
Transcript of Kern envelope sealing control kernMail Control system for … · 2021. 1. 21. · can be used with...
-
kernMail
or more sectors (ROI = Region Of Inter-ests) on the envelope can be modelled in the software and evaluated with a sensitivity that can also be set.
Depending on the analysis result, when a threshold value is reached, the decision is made whether or not to divert out the envelope.
The e sealing control for envelopes can be used with the Kern 3500 (SL) and Kern 3600 inserting systems, other systems on request.
For this purpose, the envelope is uni-formly illuminated by means of an LED light band and then images at a suitable angle with a wide-angle camera.
The software can evaluate shadow areas that inevitably occur due to an incorrectly closed envelope flap.
Since the relevance of a non-sealed area depends on the type of application (pay slips must be completely closed right up to the edge, info letters on the other hand, may have tolerances), one
Features
■ Length: 1150 mm
■ Height: 860 mm
■ Width: 340 mm
■ Simple operation
Our Services
■ Personal consultancy on-site
■ Requirement analysis, and solution proposal according to customer needs
■ Installation by Kern AG
■ System integration
■ On-site training of your employees
■ Reliable support and maintenance during operation
■ Customer-oriented service models
The module verifies whether the flap of an envelope has been properly glued or whether there are open areas.
Kern envelope sealing control Control system for envelopes
Kern AG3510 KonolfingenSwitzerland
Phone +41 31 790 35 [email protected]
e 2
02
0 _
V1
_ T
he s
peci
fica
tion
s ar
e no
t co
ntra
ctua
lly r
egul
ated
and
may
cha
nge
wit
hout
fur
ther
not
ice.
