KENNY SINGLE BEDFRAME - Tesco · KENNY SINGLE BEDFRAME Before You Start ... G 115x55x25 2 I...

24
1 KENNY SINGLE BEDFRAME Before You Start Important: Retain these instructions for future reference. When you are ready to start, make sure that you have the right tools, plenty of space and a clean, dry area for assembly. Unwrap all packaging materials and place the components on top of the carton box or on a clean floor to prevent it from scratching. Check the pack and make sure you have all the parts listed. Tools not included. Do not use power tools to construct this product. Due to the size of this product we recommend that it is assembled in the room intended for use. Ensure that this product is fully assembled as illustrated before use. Warnings This product is intended for a maximum weight of 100 kg. Do not exceed this weight. It is recommended that 2 people are required to assemble this product. Do not stand on the product. This product should only be used on firm, level ground. Make sure the legs remain in contact with the ground. Keep small parts out of reach of children. Check all screws or bolts are tightened and inspect regularly. Do not tighten screws until fully assembled. Do not overtighten screws or bolts. Do not use this product if parts are missing, damaged or worn. Do not allow children to jump on the bed as this could cause damage to the frame. Because of the size of this unit, we recommended that it is built in the room intend for use. Care Instructions To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or detergents as they can bleach or damage the product. Never use scourers, abrasives or chemical cleaners.

Transcript of KENNY SINGLE BEDFRAME - Tesco · KENNY SINGLE BEDFRAME Before You Start ... G 115x55x25 2 I...

1

KENNY SINGLE BEDFRAME

Before You Start

• Important: Retain these instructions for future reference. • When you are ready to start, make sure that you have the right tools, plenty of space and a clean, dry area

for assembly. • Unwrap all packaging materials and place the components on top of the carton box or on a clean floor to

prevent it from scratching. • Check the pack and make sure you have all the parts listed. • Tools not included. • Do not use power tools to construct this product. • Due to the size of this product we recommend that it is assembled in the room intended for use. • Ensure that this product is fully assembled as illustrated before use.

Warnings • This product is intended for a maximum weight of 100 kg. Do not exceed this weight. • It is recommended that 2 people are required to assemble this product. • Do not stand on the product. • This product should only be used on firm, level ground. • Make sure the legs remain in contact with the ground. • Keep small parts out of reach of children. • Check all screws or bolts are tightened and inspect regularly. • Do not tighten screws until fully assembled. • Do not overtighten screws or bolts. • Do not use this product if parts are missing, damaged or worn. • Do not allow children to jump on the bed as this could cause damage to the frame. • Because of the size of this unit, we recommended that it is built in the room intend for use.

Care Instructions • To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or detergents as

they can bleach or damage the product. • Never use scourers, abrasives or chemical cleaners.

2

Parts Ax2

Bx2

Cx4

Dx4

Ex1

Fx2

Gx2

Hx16

ax4 (M6x60mm)

bx8 (1/4x70mm)

cx48 (M6x20mm)

dx4 (M6)

ex8 (M6)

fx1

gx1

3

Assembly Instructions

1 bx8 ex8

f x 1

g x 1

4

2 ax4 cx8 dx4 f x 1

5

3 cx8 f x 1

4

cx32 f x 1

Produced in China for TESCO Stores Ltd.© Tesco 2011.

Product size:W1980xD970xH805mm

Catalogue ref: 207-0320

Kenny Metal Single Bedframe Assembly instructions

ww w.tesco.com

2

Kenny Metal Single Bedframe Assembly instructions

Before you start

Produced in China for TESCO Stores Ltd.© Tesco 2011.

www.tesco.com

Warnings

Important: Retain these instructions for future reference.

Unwrap all packaging materials and place the components on topof the carton box or on a clean floor to prevent it from scratching.

This product should only be used on firm, level ground.

Keep small parts out of reach of children.

This product is intended for a maximum weight of 100 kg. Do notexceed this weight.

Do’s

When you are ready to start, make sure that you have the right tools, plenty of space and a clean, dry area for assembly.

Check the pack and make sure you have all the parts listed.

Tools not included.

Due to the size of this product we recommend that it is assembled in the room intended for use.

Ensure that this product is fully assembled as illustrated before use.Make sure the legs remain in contact with the ground.

Check all screws or bolts are tightened and inspect regularly.

To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or detergents as they can bleach or damage the product.

Due to the size of this product we recommend that it isassembled in the room intended for use.

Dont’s

Do not use power tools to construct this product.

Do not tighten screws until fully assembled.

Do not overtighten screws or bolts.

Do not stand on the product.

Do not use this product if parts are missing, damaged or worn.

Do not allow children to jump on the bed as this could cause damage to the frame.

Never use scourers, abrasives or chemical cleaners.

Number of people required to assemble

Two people to assemble the product and two people to lift theproduct into position.

Time to assemble

1 hour

Tradesman’s tips

“Hi, look out for me throughout this manual. Wherever you see my picture I will have a handy tip to help you with the assembly of your product”.

My first tip is: “Before you start get a cup of tea, sit down and read through these instructions carefully”.

And for good measure my second tip is that you will need the following tools to assemble this product, so gather them to hand before you start

Tools required

5 Hex keysupplied

supplied

3

Our promise

We are happy to refund or replace any Tesco product which falls below the high standard you expect. Just ask any member of staff. This will not effect your statutory rights.

Missing parts

If you are missing any fixtures and fittings for your productplease contact our customer service team on 08450 264 549 and they will be happy to arrange for a replacement to be sent to you free of charge.

Assembly service

If you decide that you do not wish to assemble this product yourself,please contact our trained assembly team on 0845 520 5516 and one of our skilled staff will be happy to talk you through theassembly.

Tesco Self Assembly Furniture Telephone Service

Tesco has enlisted the help of FIRA Service Technicians, the UK’s experts on furniture, to provide a helpline for those hitting snags when putting their flat pack item together. The knowledgeable and patient staff at FIRA can help you and are available to take your call 08.00hrs to 20.00hrs Monday to Friday on: 0845 520 5516*

* Calls are charged at local rates.

Home service technicians

If you have a fault with your product please contact our customer service team on 08450 264 549. If you have had the product for 28 days or less you may be offered a replacement, refund or for a fully trained home service technician to visit your home to assess the fault and repair the product where possible. If you have had the product for more than 28 days we will send an independent home service technician to review and repair the product where possible and recommend further action.

The Furniture Ombudsman“Inspiring Consumer Confidence”

Further help

To view our full furniture range please visit www.direct.tesco.com.

Produced in China for TESCO Stores Ltd.© Tesco 2011.

www.tesco.com

"Inspiring Consumer Confidence"

As part of our commitment to maintaining high standards and responsible furniture retailing, Tesco is a Full Member of The Furniture Ombudsman. This means that if you’re not entirely satisfied with your purchase – and we haven’t managed to resolve the problem – you can contact them to look into it for you. By signing up to The Furniture Ombudsman Code of Practice we promise to follow their decisions – ensuring that you get a fair deal. This means that you can buy in complete confidence when selecting your furniture from Tesco.

You should first discuss your complaint with our Customer Service team on 08450 264 549 so that we can try to solve any issues. After that, if you’re still not happy you can contact The Furniture Ombudsman at www.thefurnitureombudsman.org

You can write to us at

Tesco Stores Ltd.New Tesco House, Delamare Road,Cheshunt,Herts,EN8 9SL,UK

FREEPHONE 0800 50 55 55

Kenny Metal Single Bedframe Assembly instructions

4

Getting to know your product

Produced in China for TESCO Stores Ltd.© Tesco 2011.

www.tesco.com

Kenny Metal Single Bedframe Assembly instructions

To view our full furniture range please visit www.direct.tesco.com.

Produced in China for TESCO Stores Ltd.© Tesco 2011.

www.tesco.com

5

10

0mm

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

170

180

190

200

210

220

230

240

250

260

270

280

Components supplied (not actual size)

Φ38x800A 2

Φ38x390B 2

20x40x900C 4

110x52x952D 2

76x25x858E 1

76x25x297F 2

Φ16x903H 16

115x55x25G 2

110x52x952I 1

Kenny Metal Single Bedframe Assembly instructions

Dimensions(mm) Visual QtyRef

Produced in China for TESCO Stores Ltd.© Tesco 2011.

www.tesco.com

6

10

0mm

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

170

180

190

200

210

220

230

240

250

260

270

280

Fixtures and fittings supplied(actual size)

Ref Dimensions(mm)

M6x70a

M6x60b

M6x20c

M6

M6

M6

M6

d

e

f

h

g

i

Kenny Metal Single Bedframe Assembly instructions

Visual Qty

8

4

48

4

8

8

1

16

1

7

1

Produced in China for TESCO Stores Ltd.© Tesco 2011.

www.tesco.com

Supplied ax3 M6x70 ex3 M6 gx3 M6

2

3

4

Kenny Metal Single Bedframe Assembly instructions

Supplied ax3 M6x70 ex3 M6 gx3 M6

Supplied ax1 M6x70 ex1 M6 gx1 M6

Supplied ax1 M6x70 ex1 M6 gx1 M6

x3

x3

8

5

Produced in China for TESCO Stores Ltd.© Tesco 2011.

www.tesco.com

6

3

Kenny Metal Single Bedframe Assembly instructions

7

8

Supplied Supplied bx4 M6x60 dx4 M6

Supplied cx2 M6x20 fx2 M6 gx2 M6

Supplied cx4 M6x20 fx4 M6 gx4 M6

Supplied cx2 M6x20 fx2 M6 gx2 M6

9

9

Produced in China for TESCO Stores Ltd.© Tesco 2011.

www.tesco.com

10

Kenny Metal Single Bedframe Assembly instructions

x32

Supplied cx4 M6x20

Supplied cx4 M6x20

Supplied cx32 M6x20

11