Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are...
Transcript of Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are...
![Page 1: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/1.jpg)
KenncoServing YOU since 1973!
Manufacturing
From Design to Manufacturing,Kennco is the Best You Can Buy!
Catalog 23
![Page 2: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/2.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©20112
Kennco Manufacturing has been building farm equipmentfor plasticulture and row crop farming since it was formedby Ken McElwain in 1973. Our industrial site occupiestwelve acres of a forty-three acre property. Kennco has atotal of 52,200 square feet under roof, and about thirty-fiveemployees.
Kennco’s product line is complete in that we buildequipment for every phase of the farming process–frominitial ground preparation through field cleanup afterharvest. Few manufacturers offer such a wide range ofproducts to their customers. Kennco’s small size is a
A Few Words About Our Company
benefit to the customer. We are large enough to havespecialists in the manufacturing process, but small enoughto hand-build every component and machine we sell.Because we build to order, we can customize yourequipment to your field's exact requirements.
We are fiercely proud of our work. We patent new products.We aren't afraid to improve some of our older products.Above all, what you see here is OUR product. It is the best,it is KENNCO. Many of our products are shown in thiscatalog, but we are constantly developing new items. If youare looking for something specific, please contact us today.
DRIVING DIRECTIONS TO OUR FACTORYFrom Sarasota, take I-75 heading North1. Take exit 240 (old exit 46) for Sun City Center and S.R.
674.2. At stop sign, turn left (West) onto S.R. 674. Go 3.0 miles.3. Turn right (North) onto U.S. Highway 41.4. On U.S. Highway 41, go 1.0 miles to 11th Avenue NE,
(next to Sweetbay Supermarket).5. Turn right (East) onto 11th Avenue NE.6. Continue one block to stop sign, and turn left onto 3rd
Street NE.7. Turn right into Kennco's driveway, park in front of two-
story office building.
Kennco Manufacturing, Inc.1105 3rd Street NEPO Box 1149Ruskin, FL 33575
From Tampa, take I-75 heading South1. Take exit 246 (old exit 47) for Apollo Beach and S.R. 672.2. At stop light, turn left (West) onto Big Bend Road (S.R.
672). Go 1.5 miles.3. Turn left (South) onto U.S. Highway 41.4. On U.S. Highway 41, go 5.6 miles to Ruskin's 11th Ave NE
(next to Sweetbay Supermarket).5. Turn left (East) onto 11th Avenue NE.6. Continue one block to stop sign, and turn left onto 3rd
Street NE.7. Turn right into Kennco's driveway, park in front of two-story
office building. (Total distance from I-75 and Big Bend Road is 7.6 miles.)
813-645-2591Fax [email protected]
![Page 3: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/3.jpg)
3Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
A level board is used to apply the finishing touches to anun-level field. A correctly leveled field has good irrigationand drainage characteristics. The level board leaves asmooth finish and does not create or deposit washboardsurfaces.
As the level board passes over uneven terrain in the field, itsblades scrape soil from the high areas and roll it into the lowareas. Hydraulic cylinders connected to the tongue and rearroller are used to control the front to back height of the levelboard. Soil is moved from side to side as the level boardpasses over an area, filling in low spots. Any excess soil notneeded to fill low areas is passed out the rear of themachine to the side. A finishing roller compacts the soil tominimize blowing dust and to show the quality of the levelingaction.
Ground Preparation Equipment
Our grader leveler is an implement with a variety of uses. Itis used to smooth and level small areas such as farm lanesand roads, small gardens, terraces, and other difficult-to-access areas. It follows close to the back of thetractor for better leveling on wavy terrain andfor turning in small areas.
The Kennco level board includeshydraulic adjustment to prevent the machine from diggingtoo deeply into the soil if the tractor passes through a lowspot in the field or begins to experience wheel slippage.The leveling blades have cutting edges that can be removedwhen they wear and new ones welded on. The level boardcan be set up with laser or GPS leveling systems.
Part # DescriptionBP100 8 ft (2.4 m) wide level boardBP150 10 ft (3.0 m) wide level boardBP160 12 ft (3.7 m) wide level boardStandard level boards are pulled from the tractor drawbar.Hydraulically operated equipment is supplied with 8010-4 quick couplingmale nipples to connect to the tractor unless otherwise requested.Call our sales department for weights and dimensions.
Part # DescriptionBP050 8 ft (2.4 m) wide grader levelerBP052 10 ft (3.0 m) wide grader levelerBP054 12 ft (3.7 m) wide grader levelerOur standard grader levelers fit a standard three-point Category II hitch.Call our sales department for weights and dimensions.
GRADER LEVELER
LEVEL BOARD
![Page 4: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/4.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©20114
Ground Preparation Equipment
Kennco’s ditch closer is another easy to use tool that savestime in field preparation. The ditch closer is designed to pullthe soil from the sides of an irrigation or drainage ditch backinto the ditch, filling the ditch and leveling the surroundingsoil.
The center of the ditch closer is open so that extra soil ispiled in the center of the machine where the ditch was. Thisexcess soil prevents a depression over the ditch as the soilsettles with weather and time.
A variety of different custom sizes are available to meetdifferent customer needs.
Part # DescriptionBP320 Center V type ditch plow, manual adjustmentBP325 Center V type ditch plow, hydraulic adjustmentBP340 Center V type ditch plow point onlyOur standard ditch plows fit a standard three-point Category II hitch.Hydraulically operated equipment is supplied with 8010-4 quick couplingmale nipples to connect to the tractor unless otherwise requested.Call our sales department for weights and dimensions.
Kennco’s ditch plow makes a narrow irrigationditch and distributes the displaced soil evenlyon both sides of the ditch in one pass. Ourstandard ditch plow is designed to dig a ditch10” (25 cm) deep and 16” (41 cm) wide. Ditchdimensions will vary with adjustments to thethree-point hitch position, and changing soiland environmental conditions.
As the ditch plow works, it spreads thedisplaced soil a distance anywhere from3 ft (0.9 m) to 4.5 ft (1.4 m) to eitherside of the ditch. The distance can beadjusted as desired by the operator.A hydraulic option is available toallow adjustment while ditching.
Kennco’s ditch plow is ideal for digging irrigation ditches,drainage ditches to remove excess water from the field, andfor ditch maintenance during the growing season.
Box blade attachments are available for use when the plowre-digs a ditch. They level the newly displaced soil besidethe ditch without throwing it against the side of the bed orallowing it to fall back into the ditch.
DITCH CLOSER
DITCH PLOW
Part # DescriptionBP190 14 ft (4.3 m) ditch closerBP192 16 ft (4.9 m) ditch closerOur standard ditch closers fit three-point Category II standard and quickhitches. Customized sizes are available to meet different customerneeds. Call our sales department for weights and dimensions.
BP325
![Page 5: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/5.jpg)
5Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
Ground Preparation Equipment
BOX BLADE SCRAPER
TOOL CARRIER
Kennco's box blade scraper is a very useful tool whenpreparing a field which has been out of production for asignificant amount of time or which is extremely un-level. Bydesign, box blade scrapers allow you to move soil from onearea of the field to another. Instead of simply leveling anarea in a field, you can move soil from a high to a low area.
Kennco's box blade scraper is unique in that it includes awalking wheel frame on the back of the machine. Thisprevents jarring bounces when passing over dips or bumpsin the field for better leveling. It also includes hydraulicheight adjustment and can be adapted to work with laser orGPS leveling systems. Customized sizes can befabricated.
Prior to bed formation, it is very common to make a passthrough the field with a false-bedder or pre-bedding toolcarrier. Our standard tool carrier is a rugged 20 ft (6.1 m)reinforced tool bar. The tool carrier is commonly used withbedding disks to raise a false bed, or ridge of soil. Growerswho do not use plastic mulch sometimes plant directly onto
this false bed without furthershaping.
False bedding is a good practice that can help improve thequality of bed formation. The bedding disks help loosen thesoil while moving it into proper row centerpositioning. Mounding the soil into its properrow center position will help
with bed formation because it places the soil into the centerof the bed. This means that less soil will have to be movedwhen you pass through the field with your bed shaper. If thefalse bed is raised and allowed to sit for a day or two, it cancollect moisture and dissipate air trapped within the soil toimprove compaction of the bed.
Part # DescriptionBP645 20 ft (6.1 m) wide tool carrierOur standard tool carriers fit a standard three-point Category II hitch.Kennco does not recommend mounting more than 3 sets of bedder disksto its BP645 tool carrier. Customized sizes and options are available.Call our sales department for weights and dimensions.
Part # DescriptionBP075 7 ft (2.1 m) wide box blade scraperBP080 14 ft (4.3 m) wide box blade scraperStandard box scrapers are pulled from the tractor drawbar.Hydraulically operated equipment is supplied with 8010-4 quick couplingmale nipples to connect to the tractor unless otherwise requested.Call our sales department for weights and dimensions.
![Page 6: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/6.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©20116
CROSS DITCHER
Ground Preparation Equipment
In many geographic regions or field situations, the removalof excess water from the field requires additional efforts.Our cross ditcher is a tool that cuts a channel in a bed orberm to allow water movement in the field across theplanting beds or into a drainage ditch. We make a singlerow unit that can be used on berms or individual plantingbeds and a three row unit to cut cross ditches through threebeds at a time.
Cross ditchers are powered by your tractor’s hydraulicsystem, and are controlled by the tractor driver. The drivermoves to the location in the field where you need the cross-ditch. After lowering the implement over the bed, the driveroperates the side shovels that close into the center of thebed, and cuts out a section. The operator lifts the cross
TARP LAYER FOR FUMIGATION
Part # DescriptionPS650 10 ft tarp layer for fumigationGas knives are included. Kennco does not provide hose, fittings or othercomponents of plumbing for fumigation systems. All standard tarp layersfit a standard three-point Category II hitch. Call our sales department forweights and dimensions.
ditcher and moves to the next location. As he moves thetractor to the next spot, he opens the side shovels and theyfeather the collected soil out into the row middles.
Part # DescriptionBP700 1 bed cross ditcher, centered behind tractorBP750 1 bed berm cutter, offset to right sideBP740 3 bed cross ditcher, 6 foot row centerBP741 3 bed cross ditcher, 5 foot row centerWhen ordering a cross ditcher, the customer must specify the exactdistance off center required, or the row center between planting beds.Also provide the height and width of the planting beds to be cut.All standard cross ditchers fit a standard three-point Category II hitch.Hydraulically operated equipment is supplied with 8010-4 quick couplingmale nipples to connect to the tractor unless otherwise requested.Call our sales department for weights and dimensions.
Our tarp layer is a special piece of equipment that is usedfor broadcast fumigation applications. It is used tocompletely cover a field with plastic to minimize dissipationof the gas from the soil. The unit lays the plastic mulch overthe soil and includes a system that glues two side-by-sidepieces together to create a field sized tarp.
SPECIAL ORDER ONLY.
PARTS ARE NOT STOCKED.
BP750
![Page 7: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/7.jpg)
7Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
Ground Preparation Equipment - Options
Our standard bedding disks mount on a 2¼ in (5.7 cm)standard tool bar, such as our BP645 tool carrier. They arepositioned on the bar to match your desired row centers.The BP645 tool carrier can carry as many as three sets ofbedding disks to raise false beds as narrow as 48 in (1.2 m)row centers or as wide as 72 in (1.8 m).
Our bedding disks are extremely rugged and versatile.Their height in relation to the tool carrier can be adjustedvertically in addition to full 180° rotation. The angle of theblade can be adjusted too. They are constructed of massivesteel castings with cross trussing for support.
Part # DescriptionBP505 Single blade bedding disk set
(2 disks and 2 mounting brackets per set)BP525 Double blade bedding disk set
(4 disks and 2 mounting brackets per set)Call our sales department for weights and dimensions.
ROW MARKER
BEDDING DISKS
Gauge wheels are another useful accessory for our toolcarrier. Our BP650 gauge wheels serve several purposeswhen mounted to our tool carrier. They support the weightof the implement, keep it balanced and level, and preventthe bedding disks from digging too deeply. A tool carrierrequires two gauge wheels, one mounted on each side.Each gauge wheel includes height adjustment.
Part # DescriptionBP650 Gauge wheel assembly (set of 2) for BP645 tool
carrierCall our sales department for weights and dimensions.
GAUGE WHEELS
Because one of the basic reasons to pre-bed a field is proper spacing of the beds,a tool carrier is incomplete without rowmarkers. Our BP647 row markerattaches to our BP645 tool carrier andoperates from the tractor’s hydraulicsystem.
Our standard rowmarker is adjustable to reach 5 ft (1.5 m)to 8 ft (2.4 m) from its mount on the side
of the tool carrier. Shorter or longer row markers areavailable upon request. Most tool carriers are equipped withtwo row markers, one on each side.
Part # DescriptionBP647 Hydraulic row markerBP647S Hydraulic row marker - Short
(2 required for BP645 tool carrier)Call our sales department for weights and dimensions.
BP505
BP525
![Page 8: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/8.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©20118
Bed Shapers - Superbedders
1 BED SUPERBEDDER
1 bed superbedders are designed to raise and shapeindividual planting beds. Our standard superbedders shapebeds on 5 ft (1.5 m) or 6 ft (1.8 m) row centers. Whenordering a superbedder, it is important to specify your exactrow centers. The row center determines the width of thesweeps, which are not adjustable.
Superbedders are sold in combination with replaceable
BED SHAPERS - GENERAL INFORMATION
press pans. Press pans are custom built to the size andshape of the bed desired and are not adjustable. We havefound that rigid, nonadjustable, press pans produce betterquality, more consistent beds.
It is easier and quicker to replace a pan than adjusting nutsand bolts on an adjustable pan. When the press pan is wornout, it is quick and easy to remove by simply unbolting theadjustment turnbuckles and unpinning the pan from theframe. If you need two different sized beds, you can use thesame superbedder with two different press pans. See thesection on press pans on the next page for information onspecifying your press pan dimensions.
Part # DescriptionBP400 1 bed superbedder for 6 ft (1.8 m) row centersBP401 1 bed superbedder for 5 ft (1.8 m) row centersBP404 1 bed superbedder built to custom row centersPress pans for superbedders are sold separately. All standardsuperbedders fit a standard three-point Category II hitch. Call our salesdepartment for weights and dimensions.
Planting crops on top of a raised andshaped bed is very popular in vegetableproduction. It has several benefits:
• Eliminates soil compaction in the rootzone from foot or tractor traffic
• Allows effective use of plastic mulch• Higher plant density and higher yields• Improved control of water runoff and
removal• Protection from plant disease and pests• Better control of irrigation• Allows precise fertilizer and nutrient
placement• Allows precise fumigation and pesticide
placement• More efficient harvesting• Easier field cleanup and preparation for
a second crop
Nothing before the Kennco superbedder produced aperfectly shaped bed. We built our reputation makingbedders that produce a completely filled, stable bed. Ourcustomers began referring to them as “superbedders,” andthe name stuck.
Our basic superbedder consists of a frame with mold boardplows (sweeps) that roll the soil into a press pan. The presspan is what shapes the bed, compressing the soil as itpasses through the pan. Each press pan is custom built toyour height and width requirement.
With a superbedder, you can do more than just raise andshape a planting bed.• Superbedders accept gas knifes and bottle racks so you
can apply fumigant into the soil of the bed as it is shaped.• We can mount fertilizer hoppers or liquid tanks on our
superbedders to apply dry or liquid fertilizers, or a soilincorporated herbicide, during bed formation.
• Superbedders work with an accessory to lay drip-irrigationtape on or below the bed surface.
• Superbedders can also accept an attachment to lay plasticmulch while you are shaping your raised bed.
![Page 9: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/9.jpg)
9Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
Bed Shapers - Press Pans and Liners
A bed press pan forms and compresses the soil to a uniformshape and density. Because there are no industry standarddimensions for planting beds, we custom manufacture eachpress pan to the customer’s specifications for bed width [A],bed height [B], and row center spacing [E].
Our press pans typically have a 1¼ in (3 cm) crown [D] atthe center of the bed. This helps water run off the bed,which reduces disease and nutrient leaching.
Planting beds are wider at the base to produce a stable bedthat will not collapse during plastic laying and plant setting.Our standard pans increase bed width at the base [C] by 2in (5 cm) for every 3 in (8 cm) of bed height [B]. Forexample, a bed that is 24 in (61 cm) wide [A] and 3 in (8 cm)
Soil is very abrasive and will wear out your steel press pan.A UHMW liner has high abrasion resistance and greatlyextends the life of the press pan. When the liner wears out,it can be replaced for much less cost than the steel presspan. We recommend UHMW liners for all press pans.
In addition, there are many soils that will stick to metalsurfaces. The self-lubricating properties of UHMW linersminimize soil sticking and improve the quality of the bed.
Part # DescriptionUHMW Liner for BP99X9 press pan (installed)UHMW1 Liner for BP99X8 press pan (installed)UHMW2 Liner for BP99X7 press pan (installed)Call our sales department for weights and dimensions.
SPECIFYING A PRESS PAN
high [B] will be 26 in (66 cm) wide at its base [C]. A bedthat is 36 in (91 cm) wide [A] and 6 in (15 cm) high [B] willbe 40 in (102 cm) wide at its base [C].
Row center spacing is important. If the bed is too wide forthe row centers, your sweeps may not be able to pullenough soil from the sides to fill the center of the bed. Forexample, you may have difficulty shaping a bed wider than40 in (102 cm) with a 60 in (152 cm) row center. Soilpreparation, soil type, and the addition of various beddingattachments can all affect your bed dimensions and yourability to shape a good quality bed. Best results aregenerally achieved when the bed width is about half of therow center. We suggest that you select a bed no wider than65% of the row center.
Part # DescriptionBP99X9 Unlined press pan with 48” top, customer
specified width & heightBP99X8 Unlined press pan with 60” top, customer
specified width & heightBP99X7 Unlined press pan with 72” top, customer
specified width & heightPress pans are sold separately from superbedders. Press pans whichform beds taller than 8 in (20cm) are available, but prebedding may berequired in some soils for a good quality bed. Call our sales departmentfor weights and dimensions.
UHMW LINER FOR PRESS PAN
A
B
C D
E
Bed width
Bed height
Bed width at base
Crown
Row center spacing
![Page 10: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/10.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©201110
Bed Shapers - Powerbedder and Superbedders
POWERBEDDER
MULTIPLE BED SUPERBEDDER
There are many large growers who want to shape morethan one bed in a single pass through the field. For them,we manufacture superbedders which shape two and threeraised beds at a time. We also build fully custom units withfour or more beds. Their practicality depends on the rowcenter requirements and available tractor power.
An important thing to remember when considering a multiplerow superbedder is the levelness of your land. A multiplerow superbedder requires a very level field so that each andevery bed is shaped at the same height, with the sameamount of available soil. In addition, you should considerhow the superbedder will follow the wheel tracks of yourtractor. It is more difficult to shape a bed directly behind atractor tire due to soil compaction.
Part # DescriptionBP410 2 bed superbedder for 6 ft (1.8 m) row centersBP411 2 bed superbedder for 5 ft (1.5 m) row centersBP414 2 bed superbedder for custom row centersBP420 3 bed superbedder for 6 ft (1.8 m) row centersBP421 3 bed superbedder for 5 ft (1.5 m) row centersBP424 3 bed superbedder for custom row centersBP425 3 bed superbedder for 6 ft (1.8 m) row centers,
with 6000 lb (2727 kg) fertilizer distributorBP426 SS 3 bed superbedder for 6 ft (1.8 m) row cen-
ters, with 6000 lb (2727 kg) fertilizer distributorBP434 4 bed superbedder for 30” to 72” row centersPress pans for superbedders are sold separately. All standard multi-bedsuperbedders are fabricated to fit standard three-point Category II or IIIhitches. Call our sales department for weights and dimensions.
Proper soil preparation is extremely important in order toshape a perfect planting bed. Some soil types do not lendthemselves to perfect bed formation because they clod orharden very easily. A powerbedder is a useful tool that tillsthe soil and shapes a pressed planting bed at the sametime. The tillers are powered by the tractor’s PTO shaft.Our powerbedder is more than just a tillage tool with ashaper mounted to it. It is an extremely rugged piece ofequipment that forms a tight, pressed planting bed.
Part # DescriptionBP430 1 bed powerbedder for 6 ft (1.8 m) row centersPress pans for powerbedders are sold separately. All standardpowerbedders fit a standard three-point Category II hitch. Custom rowcenters are available upon customer request. Press pan dimensionsmust be specified by the customer. All powerbedders are manufacturedto work the soil at a level even with the base of the bed. Other depthsare available upon customer request. Although many of the attachmentswe manufacture for our equipment will attach to our powerbedders, wedo not recommend their use due to machine vibration and tractorhorsepower limitations. It is the customer’s responsibility to make suretheir tractor horsepower is satisfactory for their equipment. Call our salesdepartment for weights and dimensions.
Some options that are useful tools in conjunction withpowerbedders are row markers and UHMW press panliners. Our row markers are described in detail on page 7 ofthis catalog. They allow the operator to maintain accuratespacing between planting beds as he moves through thefield.
Available Options:• UHMW bed press pan liners• Hydraulic row markers
SPECIAL ORDER
ONLY. PARTS
ARE NOT STOCKED.
![Page 11: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/11.jpg)
11Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
Bed Shapers - Options
For various reasons, it is sometimes necessary to reshapeplanting beds. We manufacture a three-point hitch thatcarries a press pan and a mounting connection thatattaches a press pan to a tool bar for this purpose.
Sometimes the sides of a planting bed will fall or crumbleafter shaping, before plastic mulch is laid. Sometimes thegrower will want to fumigate the bed after it is shaped, andneed to repair the gas knife damage and repress the bed tokeep the fumigant from escaping. This can be done using apress pan mounted on a three-point hitch or a tool bar.
A press pan mounted to a three-point hitch or tool barcannot be used to pull and raise a shaped planting bed byitself. It must be used for reshaping purposes only, or it maybe used in combination with a superbedder.
Part # DescriptionBP626 Three-point mounted frame for bed press panBP631 Tool bar mounted frame for bed press panAll three-point mounts are fabricated for standard three-point Category IIhitch connections unless otherwise requested by the customer. Call oursales department for weights and dimensions
THREE-POINT AND TOOL BAR MOUNTS FOR PRESS PANS
CHOP GATE
Chop gates are important to growers who work fields thatrequire a tremendous amount of water management. Ourchop gate attaches to the back of a superbedder orpowerbedder for the purpose of creating a break, or a crossditch, in the bed. The cross ditch allows for sidewaysmovement of runoff water in the field.
Our chop gate operateshydraulically. It can bepowered by a PTOdriven hydraulic pumpor the tractor’shydraulic system. Thechop gate is controlledby a field worker, whorides on top of theequipment in a safeposition, or by thetractor driver. Theoperator controls thechop gate by activatingthe hydraulics at anylocation in the field.The operatorcompletely controlscross ditchingplacement.
Part # DescriptionBP500 PTO powered 3 or 4 bed chop gate for
superbedderBP501 Tractor hydraulic system powered 3 or 4 bed chop
gate superbedderChop gates can be installed to existing equipment, but must be installedat Kennco. Call our sales department for weights, dimensions, and forinformation on custom chop gate designs.
BP626 with optionalpress pan attached
SPECIAL ORDER ONLY.PARTS ARE NOT STOCKED.
![Page 12: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/12.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©201112
FUMIGATION GAS KNIVES
We manufacture a wide variety of fumigation gas knives thatcan be attached to our superbedders and plastic mulchlayers. The items shown are our standard products, whichhave been proven to be effective for soil fumigation. Wealso fabricate custom gas knives to work in specialapplications. Contact our sales department for moreinformation about custom gas knives.
Our 55081, 55083, and 55084 gas knives are mostcommonly used with superbedders. They mount to a 2¼inch (6 cm) tool bar, which is built into the superbedderframe, so that they extend back into the throat of the presspan. The fumigant is placed into the bed just as the soil isrolled and compacted to form the bed.
The 55081 and 55083 knives place the fumigant about 6 in(15 cm) below the top surface of the bed and have limitedadjustability. The 55083 knife places the fumigant about 8 in(20 cm) farther back into the throat of the press pan than the55081. Our 55084 gas knife places the fumigant deeper,about 10 in (25 cm) below the surface of the bed.
Our 55080 and 55082 gas knives are used specifically withpress pans or pan-type mulch layers like those shown laterin this catalog. They mount inside a press pan and boltdirectly to the top surface. They are commonly used toapply fumigant just before the bed is covered with plasticmulch.
55090
55080
55081
55082
5508355084
All of our gas knifes are fabricated with hardened steel forlonger wear life and ¼ in (6 mm) stainless steel deliverytubes.
The number of gas knives used with a superbedder varies,based on each grower’s soil conditions, fumigant, andapplication method. As a general rule, growers usuallyposition one gas knife for every 12 in (30 cm) of bed width.For example, a superbedder shaping a bed 36 in (91 cm)wide will usually include either 3 or 4 gas knives.
Part # Description55080 Standard gas knife for flat top pans or pan-type
mulch layers55081 Standard superbedder gas knife55082 Curved gas knife for use with bed press pans55083 Extra long gas knife for deeper placement in the
throat of the press pan55084 Extra depth gas knife for deeper placement
beneath the bed surface55090 Mounting bracket for superbedder/tool bar
mounted gas knivesPositioning of gas knives, and number of gas knives attached toimplements, is the sole decision of the customer. Kennco does notprovide hose, fittings or other components of plumbing for fumigationsystems. Contact Kennco’s sales department if you need a gas knifewith different specifications than described in this catalog.
Bed Shapers - Fumigation Options
![Page 13: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/13.jpg)
13Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
GAS BOTTLE RACK AND TRACTOR-MOUNTED “PIG” RACK
Bed Shapers - Fumigation Options
In addition to gas knives,we also manufacture avariety of mounting racksfor gas bottles and “pigs.”
Our single bottle racksclamp onto plastic layersand superbedders as aquick and secure way toadd carrying capacity forround gas bottles.
Our standard gas bottleracks secure either threeor five 250 lb gas bottles.They can be mounted tothe top of a Kenncosuperbedder or any otherflat surface available. Theycan also be provided withmounts to bolt onto atractor at the customer’srequest. They include
dividers between the bottles and a ratchet strap to keepthem secure, along with a mount for the pressurizing tank.
Our “pig” racks for fumigation tanks can be mounted directlyto a tractor. Our most common “pig” rack is our modelBP690 hydraulically lifted rack. It includes a support framethat bolts directly to the front of your tractor and a lift rackthat operates hydraulically. The lift rack can be raised orlowered hydraulically to load and unload “pig” tanks. TheBP690 also includes space to mount additional gas bottlesand/or pressurizing tanks.
BP670
BP690
BP660
Gas bottle racks and “pig” tank mounts are products that arevery customized by nature. Because of the many differentsized tanks or bottles, many different types of fumigationproducts, and many different types of tractors used inagriculture, it is difficult to make a mount that fitseverybody’s needs.
When you contact us to order a rack for gas bottles or tanksit is important to provide us with the manufacturer andmodel number of your tractor, the exact specifications ofyour bottles and tanks, and any other specifications ordimensions required to size the mount correctly.
Part # DescriptionBP660 14" Gas bottle rack-single clamp-onBP661 10" Gas bottle rack-single clamp-onBP662 14" Gas bottle rack-single for 1 row SuperbedderBP663 10" Gas bottle rack-single for 1 row SuperbedderBP670 3 gas bottle rack, includes mount for pressurizing
tank and tie down strapBP671 5 gas bottle rack, includes mount for pressurizing
tank and tie down strapBP690 Single “pig” tank rack, hydraulic lift, includes
mount for pressurizing tank and tie down strapBP691 Double “pig” tank rack, hydraulic lift, includes
mount for pressurizing tank and tie down strapGas bottle racks can mount directly to Kennco superbedders. Thecustomer must provide tractor mounting information for any bottle or tankracks mounted directly to tractors. Include this information whencontacting our sales department for quotations or orders. Kennco doesnot provide hose, fittings or other components of plumbing for fumigationsystems. Hydraulically operated equipment is supplied with 8010-4 quickcoupling male nipples to connect to the tractor unless otherwiserequested.
SPECIAL ORDER
ONLY. PARTS
ARE NOT STOCKED.
![Page 14: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/14.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©201114
Bed Shapers - Options
ADD-ON PLASTIC LAYER
suggest sending the unit to Kennco for the necessarymodifications.
Part # DescriptionPS204 1 bed add-on plastic layer, custom row centersPS206 1 bed add-on plastic layer for up to 60” row centerPS205 1 bed add-on plastic layer for up to 72” row centerPS207 2 bed add-on plastic layer, custom row centersPS210 3 bed add-on plastic layer, custom row centersPS214 4 bed add-on plastic layer, custom row centersPlease specify your exact plastic mulch width, row centers, and bed sizewhen ordering. Call our sales department for weights and dimensions.
Many growers like to lay plastic mulch over beds at thesame time that the beds are raised and shaped. Thiseliminates one pass through the field with a tractor. Kenncomakes an attachment for our superbedders that allows thegrower to lay plastic mulch on a planting bed as it is shaped.
The attachment bolts onto the back of a superbedder frame.It is functionally equivalent to our high speed plastic mulchlayer which is described on page 20. This attachmentallows the grower to form a planting bed and cover it withplastic mulch in a single pass.
We do not recommend that growers purchase ourplastic mulch add-on and attempt to modify theirexisting superbedders. There are several modificationsto the superbedder that need to take place. If you wantto add a plastic layer to an existing superbedder, we
It is very common to mount bedding disks on asuperbedder. In heavier soil conditions, or with wideplanting beds, growers may find that they have trouble fillingthe center of the bed. A set of bedding disks mounted onthe front tool bar of the superbedder help move soil into thecenter of the bed, ensuring that it is solid and filled from sideto side.
Our bedding disks are extremely rugged and versatile.Their height in relation to the tool carrier can be adjustedvertically in addition to full 180° rotation. The angle of theblade can be adjusted too. They are constructed of massivesteel castings with cross trussing for support.
Part # DescriptionBP505 Single blade bedding disk set
(2 disks and 2 mounting brackets per set)BP525 Double blade bedding disk set
(4 disks and 2 mounting brackets per set)Call our sales department for weights and dimensions.
BEDDING DISKS
BP505
BP525
![Page 15: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/15.jpg)
15Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
Bed Shapers - Options
IRRIGATION DRIP TAPE LAYER AND SUBSOIL SHANK
Some growers lay drip irrigation tape while they are shapingtheir planting beds. This allows them to put the tape belowthe surface of the bed using a subsoil shank for placement.Our drip irrigation tape layer attaches to the tool bar on oursuperbedder or any other tool bar.
It includes a stand to hold one or two reels of drip tape onthe machine and a ground feed tube which lays the drip tapeon or below the surface of the bed. The ground tube ismade of stainless steel and includes a heat-treated wearguard.
A smooth heavy-duty polymer guide funnel minimizes cutsand tears in the drip tape as it enters the ground tube. Thefunnel is very simple and inexpensive to replace, comparedto repairing other manufacturers’ guide systems.
The drip tape layer includes a disc-brake mechanism toprevent spool backlash during starts and stops. Its spindleand side plates accept all styles of drip irrigation tape.
The mounting brackets for the reel stand and ground tubeallow sideways adjustment so the irrigation tape can belocated exactly where desired on the planting bed.
A variety of different ground tubes are also available. Roundground tubes are most often used because they allow thedrip tape to pass freely with minimal clogging or restrictions.Flat ground tubes are used when growers have a difficulttime getting the drip tape to lay flat on the bed.
See page 23 for a complete discussion of drip tape layers.
Part # Description53021 Subsoil shank drip irrigation55256 Mounting bracket for subsoil shankCall our sales department for weights and dimensions.
ROW MARKER
Row markers are frequently added tosuperbedders to ensure that the plantingbeds are spaced evenly apart. OurBP647 row marker can be mounted on asuperbedder frame and operates fromthe tractor’s hydraulic system.
Our standard rowmarker is adjustable to reach about 5 ft(1.5 m) to 8 ft (2.4 m) from its mount onthe side of the superbedder. Shorter or
longer row markers are available upon request. Mostsuperbedders are equipped with two row markers, one oneach side.
Part # DescriptionBP647 Hydraulic row marker (2 required)BP647S Hydraulic row marker - Short
(2 required for BP645 tool carrier)Call our sales department for weights and dimensions.
Subsoil shank Ground feed tube
Drip Tape Layer
![Page 16: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/16.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©201116
FERTILIZER APPLICATORS FOR BED SHAPERS
One option that separates Kennco's superbedder from allothers is that our frame and superstructure are strongenough to add a dry fertilizer hopper. This allows the growerto apply fertilizer or other nutrients to the planting bed at thetime it is formed. Our 600 lb (273 kg) and 1,300 lb (591 kg)hoppers fit on 1 bed superbedders. For multiple bedsuperbedders, we make hoppers that hold about 2000 lb(909 kg) of fertilizer per bed. For example, a 6000 lb (2727kg) hopper fits a 3 bed superbedder.
Fertilizer is delivered to the exit door by astainless steel feed chain. A 6 in widechain is used on our 600 lb (273 kg)hopper. 12 in chain is used on largermodels. The fertilizer application rate iscontrolled by the feed chain speed and exitdoor opening height. A flow control valveon the hydraulic motor controls the chainspeed. The exit door opening height isadjustable by a simple screw mechanism.
After going through the exit door, fertilizer falls into astainless steel catch hopper for distribution on the bed.Catch hoppers are custom built for theapplication method desired. Fertilizer can bebanded through 1, 2, or 3 tubes for exactplacement in the bed. The tubes are adjustablefrom side to side to any position on the bed.They lay a line of fertilizer about 2-3 in (5-7.5cm) wide. In most cases, banding tubes areused with "shoes" that are welded into thesuperbedder press pan. Each shoe makes atrench about 2 in (5 cm) deep and 3 in (7.5 cm)wide. When adjusted properly, the banding tubedrops the fertilizer directly into this small trenchin the top of the bed.
We also make a bandcast catch hopper and distributorwhich spreads the fertilizer across the top of the bed evenlyinstead of in a line.
When ordering a fertilizer hopper with a superbedder, it isimportant to specify whether to feed fertilizer into the throatof the press pan, which mixes the fertilizer with the soil, orbehind the press pan onto the formed bed. Placing thefertilizer into the soil as it is rolled and mixed gives thebenefit of mixing, but reduces control over placement. Mostof our customers prefer precise placement.
Our fertilizer hoppers are constructed of stainless steel or 14gauge hot-rolled steel that is cold-galvanized before painting.
Part # DescriptionBP840 250 lb hopper with 6” feed chainBP845 Stainless steel 250 lb hopper with 6” feed chainBP808 600 lb (273 kg) hopper with 6” feed chainBP959 Stainless steel 600 lb hopper with 6” feed chainBP823 1300 lb (591 kg) hopper with 12” feed chainBP960 Stainless steel 1300 lb hopper with 12” feed chainBP833 6000 lb (2727 kg) hopper for 3 bed superbedder
with 12” feed chainsBP961 Stainless steel 6000 lb hopper for 3 bed
superbedder with 12 in feed chains - 6’ row centerBP962 Stainless steel 6000 lb hopper for 3 bed
superbedder with 12 in feed chains - 5’ row center67910 Stainless steel 1 tube, banding catch hopper67920 Stainless steel 2 tube, banding catch hopper67930 Stainless steel 3 tube, banding catch hopper67937 Stainless steel over the top (bandcast) distributor
and hopper55621 2 inch fertilizer grooving shoe for press pan55622 3 inch fertilizer grooving shoe for press panWhen ordering the “bandcast” catch hopper and distributor, the customermust specify the exact width that they want to apply the fertilizer to thebed top. It is the customer’s responsibility to ensure that they haveenough tractor horsepower to lift and pull a superbedder with varioussized fertilizer hoppers through the field. Kennco’s sales department canonly advise on horsepower requirements and can provide equipmentweights and dimensions. Fertilizer capacity is approximate.
Fertilizer Applicators - Options for Bed Shapers
Exit DoorAdjustment
67910
HydraulicMotor
FlowControl Valve
BP823
Feed Chain
BP833
![Page 17: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/17.jpg)
17Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
Fertilizer Applicators
Part # DescriptionBP953 10,000 lb (4545 kg) 3 bed fertilizer applicator
without catch hoppers on 6 ft row centersBP955 10,000 lb (4545 kg) 3 bed fertilizer applicator
without catch hoppers on 5 ft row centersBP956 Stainless steel 10,000 lb (4545 kg) 3 bed fertilizer
applicator on 6 ft row centersBP958 Stainless steel 10,000 lb (4545 kg) 3 bed fertilizer
applicator on 5 ft row centersBP954 10,000 lb (4545 kg) 1 bed fertilizer applicator
without catch hopperBP957 Stainless steel 10,000 lb (4545 kg) 1 bed fertilizer
applicator without catch hopper67910 Stainless steel, 1 tube, banding catch hopper67920 Stainless steel, 2 tube, banding catch hopper67930 Stainless steel, 3 tube, banding catch hopper67937 Stainless steel, over the top (bandcast) distributor
and hopperSelf-contained fertilizer rigs are pulled by a tractor, or other vehicle,drawbar. When ordering the "bandcast" catch hopper and distributor, thecustomer must specify the exact width that they want to apply thefertilizer to the bed top. It is the customer’s responsibility to ensure thatthey have enough tractor horsepower to pull a fertilizer distributorthrough the field. Kennco's sales department can only advise onhorsepower requirements and can provide equipment weights anddimensions. Fertilizer capacity is approximate.
Kennco doesn’t just make attachments to apply fertilizerwith our superbedders. We make a variety of implementsspecifically for nutrient application.
Our 3 bed fertilizer applicator is a 10,000 lb (4545 kg) rigthat straddles 3 planting beds to apply dry fertilizer to thesurface of shaped beds. In its standard form, it isconstructed of 12 gauge steel that is cold galvanized prior topainting. It is also available in stainless steel. The feedchain is driven by a hydraulic motor on our standard units,but a ground wheel drive system is also available. Theground drive wheels are engaged hydraulically. A 12 instainless steel chain is used to move fertilizer to the exitdoor, which is adjustable to control the application rate.
The 3 bed fertilizer applicator is pulled by the tractor’sdrawbar. A smaller tractor can be used to pull it through thefield compared to that required to carry a superbedder and6000 pound fertilizer distributor on a three-point hitch.
A separate fertilizer applicator also gives the growerflexibility in timing nutrient applications that a superbedder-mounted applicator does not.
FERTILIZER APPLICATORS
Our 1 bed fertilizer applicator is also a 10,000 lb (455 kg)rig, but it is designed to apply fertilizer to a single bed or tooperate as a broadcast distributor. The unit is pulled by a
tractor, straddling a single planting bed. Utilizing the samecatch hoppers as our other units, it drops fertilizer on thesurface of the planting bed in 1, 2, or 3 bands, or evenly(bandcast) across the top of the bed.
This unit is constructed of 12 gage steel that is coldgalvanized prior to painting. It is also available in stainlesssteel. It uses a 12 in feed chain that runs the length of theunit to completely empty the hopper. The chain is grounddriven by a hydraulically engaged wheel.
Our 1 bed fertilizer applicator is also available for use as abroadcast spreader. The catch hopper can be replaced witha hydraulically controlled spinner to spread a swath offertilizer on any field.
BP953
Stainless steel over the top(bandcast) distributor
Laying 2 bands offertilizer on each bed
BP954
Ground Wheel Drive
![Page 18: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/18.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©201118
BP642
SM800
Liquid Fertilizer Injection Wheel
Our fertilizer injection wheel lets you apply liquid fertilizerthrough plastic mulch for supplemental feeding onan existing crop, or when growing a second or thirdcrop on a bed. As the wheel is pulled over the topof a planting bed it punches a holethrough the mulch every 8inches (20 cm) and leaves ashot of fertilizer. Severalwheels can be used on a bedas close as about 6 inches (15 cm) on center. Thewheel pivots for use on the top or side of the bed.
The wheels are designed to float along the surface of theplanting bed without down force from the tractor. The onlypressure they exert on the bed surface should be from theirown weight and the spring mounting arm.
When a tip is penetrating the plastic, the wheel’srotary valve mechanism allows fertilizer to flow tothat tip. This ensures that the fertilizer is appliedonly where it is needed. The valve timing iseasily adjustable. Our patented rotary valvemechanism is available only on Kennco’sinjector wheel.
Each tip has a ball type check valve whichretains leftover fertilizer in the tip’s supplytube to further reduce fertilizer waste.
The wheel comes with assorted flow regulatororifices. In combination with fluid pressure and tractorspeed, the flow regulator allows precision application of thecorrect amount of fertilizer.
The wheel is constructed of stainless steel and industrialplastics for corrosion resistance. The basic wheel includesa spring type wheel mounting arm, assorted flow controlorifices, and application rate charts.
Wheel carriers can be custom built to your requirements.They range from a simple tool bar type carrier that usestractor mounted tanks, to elaborate self-centering rigs thatincorporate hydraulic controls.
Part # DescriptionSM800 Liquid fertilizer injection wheelBP642 10 ft (3 m) tool barBP643 12 ft (3.6 m) tool bar80075 Injection wheel rigid mount80076 Injection wheel spring mountLiquid fertilizer injection wheels are designed to operate at low pressures,up to 50 psi (3 bar). Other options are available by calling the Kenncosales department. When ordering, the customer must specify what typeof equipment will carry the injection wheel and order separate mountingbrackets. Call our sales department for weights and dimensions.
LIQUID FERTILIZER INJECTION WHEEL
SM800
80075
SPECIAL ORDER ONLY.PARTS ARE NOT STOCKED.
![Page 19: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/19.jpg)
19Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
Plastic Mulch Layers
Our plastic mulch layers outperform other equipmentavailable for plasticulture. Our experience in laying plasticmulch, and in equipment design, allows us to build you apiece of equipment that lays plastic mulch tightly andpermanently over either a raised bed or flat ground.
Plastic mulch provides a variety of advantages to growersinvolved in fruit and vegetable production.
• Plastic mulch increases soil temperature, enhancinggermination and speeding plant growth. Quick cropdevelopment means an earlier harvest and increased earlyyields.
• It inhibits weed growth within the planting bed. Darkmulches prevent light from reaching weeds under themulch.
• It improves control over soil moisture content by reducingloss of moisture from the planting bed, and providesgreater moisture uniformity when used with drip irrigation.
• It prevents leaching of fertilizer from direct contact withrainfall.
• It reduces soil compaction and erosion around the croproot system caused by heavy pounding rains.
• It serves as a barrier between the fruit and soil to keep thefruit cleaner and prevent rotting.
• It improves the effectiveness of soil fumigants bypreventing dissipation from the soil to the atmosphere.
The keys to laying plastic mulch are to lay it tight and to burythe edges well so that it stays on the bed. Kennco mulchlayers do this. When laying plastic mulch, it is important tomake sure that it is centered equally over the top of theplanting bed and that the plastic layer is square. It is difficultto do this with equipment that bolts together on a single toolbar. Bolted connections loosen and slide, and they requireconstant adjustment. Our standard products have a weldedframe instead of components that are bolted to a tool bar.
PLASTIC MULCH LAYERS - GENERAL INFORMATION
How to size plastic mulchIt is extremely important to bury a sufficient amount ofplastic mulch so that it does not come loose over time.Most growers find that at least 6 in (15 cm) of plastic oneach edge should be buried. Any smaller amount is difficultto bury and to keep buried.
Example of how to calculate the needed plastic mulch widthto sufficiently cover the bed and bury the edges.If your bed is 36 in (91 cm) wide at the top and 8 in (20 cm)high: 36 in + (8 in + 8 in) + (6 in + 6 in) = 64 in wide
or 91 cm + (20 cm + 20 cm) + (15 cm + 15 cm) = 161 cm
Plastic mulch should not be greatly oversized. Too muchextra mulch can wrap around the stretching wheels andblock the soil from rolling into the burying cup.
1) Cross section of a raisedbed before laying plastic
2) The “cup” or “tuck” areaafter the boat cuts the groove
3) The completed process afterthe hiller disks bury the plastic
Job done correctlywith proper width
plastic mulch
Wrong:plastic too
narrow
![Page 20: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/20.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©201120
Our most popular mulch layer is the high speed plastic layer.Built around a heavy-duty welded frame, it carries two rollsof plastic mulch. The machine operator can switch fromone roll of plastic mulch to the second "on-the-go" in themiddle of the field, without having to stop. This allows fulluse of every roll of plastic and prevents stops in the middleof the field that slow production. It is easy to adjust thismachine for different plastic mulch widths.
The high speed mulch layer has boats that reshape the sideof the bed and dig a "cup" where the edge of the mulch willbe buried. An adjustable braking mechanism slows therollers that carry the roll of mulch to stretch it as it is laid.
The crown roller rides just above or lightly on the plantingbed to smooth the plastic along the bed top. It is shaped tomatch the crown in most planting beds so that it does notflatten or compact the crown.
Plastic Mulch Layers - High Speed
1 BED HIGH SPEED PLASTIC MULCH LAYER
The stretching wheels pull theplastic down the side of the bedand press it into the burying cup.Closing disks roll the soil that wasremoved by the boats back overthe plastic in the cup, holding ittightly on the bed. Support wheelson the back of the machine canbe used to pack the soil over theedge of the plastic, provided thatthey do not touch the side of thebed.
Our high speed mulch layer isavailable with a variety of optionsthat make it an extremely versatiletool. It can be used with anoptional press pan to reshapeplanting beds. Fumigation gasknives can be used (with a presspan which re-forms the bed to
prevent dissipation). An irrigation drip tape layer can beadded to lay drip tape on the bed surface just under theplastic or at a set depth within the planting bed. Theseattachments are described later in this section of thecatalog.
Part # DescriptionPS195 1 bed high-speed plastic layer, 5 ft (1.5 m) row
centers, 54 in (137 cm) wide mulch or narrowerPS200 1 bed high-speed plastic layer, 6 ft (1.8 m) row
centers, 72 in (183 cm) wide mulch or narrowerPS201 1 bed high-speed plastic layer, 7 ft (2.1 m) row
centers, 84 in (213 cm) wide mulch or narrowerPS196 1 bed high-speed plastic layer, custom row
centers, 96 in (244 cm) wide mulch or narrowerWeights and dimensions, are available by contacting our salesdepartment. Category II hitches are standard. When ordering a highspeed machine, please specify plastic width, row centers, anddimensions of your planting bed. Call our sales department for weightsand dimensions.
Closing Disks
Boats Crown RollerStretching Wheels
STABILIZATION COULTERS
It is very important to make sure that your plastic mulchlayer follows the tractor in a straight line. This is difficult infields where you are riding the side slope of a hill.
We provide stabilization coulters that mount to the sideframe of a high speed mulch layer. They consist of amounting bracket and a straight disk. Once the disk is setinto the soil it makes it difficult for the machine to slidesideways.
![Page 21: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/21.jpg)
21Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
Plastic Mulch Layers - High Speed
MULTIPLE BED HIGH SPEED PLASTIC MULCH LAYER
Our high speed plastic mulch layers are available as multi-bed units. 3 bed units are popular with larger growers whoneed to lay plastic mulch quickly on large acreage. Imaginemoving through your field covering 3 planting beds at onceand laying drip irrigation tape into each bed at the sametime. You can do it with our multiple bed units.
We recommend that multi-bed equipment be used as a set.It is much easier to run a 3 bed mulch layer when it follows amatching 3 bed superbedder rather than a single-bedsuperbedder. The row center spacing will match perfectlybetween the two 3 bed implements. This minimizesdamage to the beds and the amount of reshaping required
from the layer’s press pan orboats.
When considering the use of amultiple bed unit, it is importantto remember that they arefabricated on a rigid frame. Aproperly prepared flat and levelfield will help ensure trouble-free bedding and plastic laying.
Multiple bed units are availablein a variety of customconfigurations, from 2 to 4beds. The row centers must fitaround the tractor tires, solayers with even numbers ofbeds must be built offset or therow centers must be narrowenough that your tractor canstraddle two rows.
Part # DescriptionPS220 2 bed plastic mulch layer on 6 ft (183 cm) row
centers, plastic up to 68 in (168 cm) widePS222 2 bed stacked plastic mulch layer, custom widths
Offset design allows plastic wider than row centerPS231 3 bed plastic mulch layer on 5 ft (152 cm) row
centers, plastic up to 54 in (137 cm) widePS230 3 bed plastic mulch layer on 6 ft (183 cm) row
centers, plastic up to 66 in (168 cm) widePS229 3 bed plastic mulch layer on 80 in (203 cm) row
centers, plastic up to 74 in (187 cm) widePS228 3 bed plastic mulch layer on custom row centers,
plastic up to 88 in (224 cm) wideCustomized row centers are available on multiple unit rigs throughconsultation with our sales department. Category ll hitches are standard.When ordering a high speed plastic layer, please specify plastic width,row centers, and dimensions of planting bed. Call our sales departmentfor weights and dimensions.
![Page 22: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/22.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©201122
Plastic Mulch Layers - Specialty
This was the original Kennco plastic mulch layer. It is theperfect mulch layer for growers who lay plastic in fields thathave a lot of hills and valleys. It rides close to the back ofthe tractor and stays tight against the soil surface regardlessof terrain. The stretching wheels and closing disks float upand down for this purpose.
Our pan type mulch layer carries a single roll of plasticmulch that rides freely on its rollers. The standard machineuses a flat roller that rides above the bed surface, ratherthan a crown roller which touches the bed. (Crown rollersare available as an option.) The pan type mulch layer isadjustable to various plastic mulch widths and can work withour drip irrigation tape attachment and fumigation knives.
PAN TYPE PLASTIC MULCH LAYER
Part # DescriptionPS115 1 bed pan type plastic mulch layer, 54 in (137 cm)
wide machine, up to 48 in (122 cm) mulchPS117 1 bed pan type plastic mulch layer, 60 in (152 cm)
wide machine, up to 54 in (137 cm) mulchPS120 1 bed pan type plastic mulch layer, 72 in (183 cm)
wide machine, up to 66 in (167 cm) mulchPS121 1 bed pan type plastic mulch layer, 80 in (203 cm)
wide machine, up to 74 in (188 cm) mulchPS122 1 bed pan type plastic mulch layer, 90 in (228 cm)
wide machine, up to 84 in (213 cm) mulchPS133 Flat roller assembly for PS115PS134 Flat roller assembly for PS117PS124 Flat roller assembly for PS120PS125 Flat roller assembly for PS121PS126 Flat roller assembly for PS122PS131 Crowned trailing roller for PS115PS132 Crowned trailing roller for PS117PS128 Crowned trailing roller for PS120PS129 Crowned trailing roller for PS121PS130 Crowned trailing roller for PS122Custom row centers along with weights and dimensions are available bycontacting our sales department. Category II hitches are standard.When ordering a pan-type machine, please specify plastic width, bedwidth and height, and row centers.
![Page 23: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/23.jpg)
23Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
IRRIGATION DRIP TAPE LAYER
Plastic Mulch Layers - Options
The most popular attachment for plastic mulch layers is anirrigation drip tape layer. It includes a stand to hold one ortwo reels of drip tape on the machine and a ground feedtube which lays the drip tape on the surface of the bedunder the plastic mulch. The ground tube is made ofstainless steel and includes a heat-treated wear guard forlonger life.
A smooth heavy-duty polymer guide funnel minimizes cutsand tears in the drip tape as it enters the ground tube. Thefunnel is very simple and inexpensive to replace, comparedto repairing other manufacturers’ guide systems.The drip tape layer includes a disc-brake mechanism toprevent spool backlash during starts and stops. Its spindleand side plates accept all styles of drip irrigation tape.
The mounting brackets for the reel stand and ground tubeallow sideways adjustment so the irrigation tape can belocated exactly where desired on the planting bed.
The system is available with a double reel stand to hold asecond roll of tape. A subsoil shank is available to place thedrip tape at a depth below the surface of the bed. See page15 for details.
A variety of different ground tubes are also available. Roundground tubes are most often used because they allow thedrip tape to pass freely with minimal clogging or restrictions.Flat ground tubes are used when growers have a difficulttime getting the drip tape to lay flat on the bed.
Part # Description55707 Dual Drip Layer with Auto Brake55715 Single Drip Layer with Auto Brake
55658 Standard ground tube - round with wear guard55659 Standard ground tube - flat55660 2 inch diameter ground tube - round with wear
guard
55648 Irrigation drip tape layer mounting bracket - forhigh speed plastic mulch layer
55651 Irrigation drip tape layer mounting bracket - forsuperbedder
55647 Irrigation drip tape layer mounting bracket - forpan type plastic mulch layer
55649 Standard ground tube mounting bracket - for highspeed plastic mulch layer
55654 Standard ground tube mounting bracket - forsuperbedder
55672 Standard ground tube mounting bracket - for pantype plastic mulch layer
55663 2 inch ground tube mounting bracket - for highspeed plastic mulch layer
55640 Irrigation reel side plate - outer55641 Irrigation reel side plate - inner55646 Wingnut for reel55699 Standard funnel55697 2 inch funnel55652 Brake padCall our sales department for weights and dimensions. When ordering adrip irrigation tape system, it is important to provide the followinginformation to our sales department: What will you be mounting thesystem on (provide tool bar or frame size and dimensions)? Will you belaying the drip tape on the bed surface or at a depth below, and at whatdepth?
55658 GroundTube
55692Funnel55651
Mounting Bracket
55654GroundTubeMountingBracket
55707
![Page 24: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/24.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©201124
Press PanGas Knives
Plastic Mulch Layers - Options
PRESS PAN
If you are going to use your mulch layer to apply a fumigant,then you must have a way to seal the slit created by the gasknives. The gas knives will tear up the planting bed as theypass through it, and the damage they create must berepaired. A press pan can be added to your mulch layer forthis purpose.
Press pans for mulch layersare different from thosedescribed earlier inthe catalog forbed shapers.They aremounteddifferently andinclude soilkick-outs thatdig the cup(trench) wherethe edge of the mulchwill be buried.
It is critical that the press pan on theplastic mulch layer match the size of the press pan on thebed shaper that formed the bed. If it is too small, it will pushsoil in front of the bed.
Press pans are only optional for high speed mulch layers.Pan-type layers come with a press pan as part of theirdesign. It is important to specify the exact width and heightof your planting bed when ordering a press pan for a mulchlayer.
See page 9 for more information on press pans.
UHMW LINER FOR PRESS PAN
Part # DescriptionBP99X9 Unlined press pan, customer specified width and
height up to 42 in w x 8 in h (106 x 20 cm)BP99X8 Unlined press pan, customer specified width and
height up to 54 in w x 8 in h (137 x 20 cm)BP99X7 Unlined press pan, customer specified width and
height up to 66 in w x 8 in h (167 x 20 cm)Press pans are sold separately from plastic mulch layers. Press panswhich form beds taller than 8 in (20cm) are available, but requireselection of the next larger size pan Part #. For example, a 40 in widebed that is 10 in high would require a BP99X8 press pan. Call our salesdepartment for weights and dimensions.
Soil is very abrasive and will wear out your steel press pan.A UHMW liner has high abrasion resistance and greatlyextends the life of the press pan. When the liner wears out,it can be replaced for much less cost than the steel presspan. We recommend UHMW liners for all press pans.
In addition, there are many soils that will stick to metalsurfaces. The self-lubricating properties of UHMW linersminimize soil sticking and improve the quality of the bed.
Part # DescriptionUHMW Liner for BP99X9 press pan (installed)UHMW1 Liner for BP99X8 press pan (installed)UHMW2 Liner for BP99X7 press pan (installed)Call our sales department for weights and dimensions.
![Page 25: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/25.jpg)
25Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
It is often desirable to apply a fumigant to the planting bedwith your plastic mulch layer. The plastic mulch covers thebed immediately after application and prevents dissipation ofthe gas into the atmosphere.
FUMIGATION GAS KNIVES
We manufacture several different kinds of gas knives forfumigation with our plastic mulch machines. Our standardgas knives (part numbers 55081, 55083, and 55084) canmount on the 4 in (10 cm) square frame used on our highspeed machines.
Our preferred gas knives for use with mulch layers are thepan mounted (part numbers 55080 and 55082) gas knives.These gas knives have a narrower profile that causes lessdamage to the bed as they pass through it. They boltdirectly to the inside top surface of the press pan. (Kenncodoes not advise using gas knives with its mulch layerswithout a press pan to re-press the bed, sealing thefumigant into the bed.) See page 12 for more informationon gas knives.
Plastic Mulch Layers - Options
Our single row high speed mulch layers can be used toapply tunnels over planting beds. Using interchangeablemachine components, they can be raised to pass over thehoops used to support the plastic tunnel. The machinestretches the tunnel plastic over the hoops and buries theedges just as it would standard mulch on a bed. The samehigh speed mulch layer can be used for both jobs with theaddition of the optional parts listed below.
Part # Description55003 Adjusting hiller shank extended (2 required)55124 Clamp on 90 adjustable axle LH (2 required)55125 Clamp on 90 adjustable axle RH (2 required)55126 Bracket clamp on 90 adjustable axle (4 required)55245 Wheel shank add-on high speed plastic machine
(2 required)Call our sales department for weights and dimensions.
TUNNEL APPLICATOR
When laying plastic mulch on flat ground or on the topsurface of a bed (instead of down its sides), disk blades aresometimes used in place of our standard boats. The disk ismounted on an adjustable shank to dig as deep and wide aburying cup as necessary. We use a 12 in concave disk forthis purpose.
Part # Description50100 12 in grooving disk55004 Mounting shank50215 Hub assembly55649NPN Mounting bracketCall our sales department for weights and dimensions.
BURYING CUP DISKS
SPECIAL ORDER
ONLY. PARTS
ARE NOT STOCKED.
![Page 26: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/26.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©201126
MINI-COMBO SUPERBEDDER
Our mini-combo machine is very popular among ourcustomers. Utilizing sweeps and press pan similar to asuperbedder, but on a smaller frame, it produces a qualityplanting bed equal to our superbedders. The back half ofthe machine consists of a floating high speed mulch layer.
A mini-combo machine accepts the following attachments:• A drip irrigation attachment that will hold a single or double
reel stand. It is best used to lay a single line of drip tape.(See page 23.)
• Fumigation gas knivescan be mounted on amini-combo, butspace is limited. Itcan be difficult tomount both
Combination machines pull and shape a raised planting bedand cover it with plastic mulch at the same time. This is avery attractive feature to many growers who are interestedin minimizing the number of times they pass through thefield with a tractor.
When deciding whether to use a combination machine or aseparate superbedder and plastic mulch layer, consider thefollowing:• Do you have a large enough tractor to pull the equipment?
Combination machines are heavier than superbeddersand/or mulch layers. You may not be able to pull acombination machine with the same tractor that pulls asuperbedder or mulch layer.
Bedder/Mulch Layers - Combination Units
• Are you able to consistently form a fully-filled and solid highquality planting bed? Because the combination machinescover the bed as it is shaped, it is difficult to visuallyinspect bed quality. You may not know if there are valleysor breaks in the bed that can create problems for the croplater.
• Combination machines are usually longer and larger thanindividual superbedders and mulch layers. This meansthat they are less suitable for fields with undulating terrain.
With a skilled operator and good field conditions,combination machines can be a tremendous tool for thegrower to keep production costs low.
COMBINATION UNITS - GENERAL INFORMATION
Part # DescriptionBP470 Mini-combo on 5 ft (152 cm) row centers, without
press pan or accessories.BP471 Mini-combo on 6 ft (183 cm) row centers, without
press pan or accessories.A three-point Category II hitch is standard. Call our sales department forweights and dimensions and for recommendations on accessories.Custom row centers are available. Crowned trailing rollers do not fit onmini-combos, straight rollers are used.
fumigation knives and drip irrigation tape, depending uponyour location requirements. A mini-combo is a goodmachine for fumigating your beds because it includes apress pan to reseal the fumigation slits.
• Bedding disks can be used with a mini-combo machine,but space limitations may prevent the use of otherattachments at the same time. (See page 14.)
![Page 27: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/27.jpg)
27Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
Bedder/Mulch Layers - Combination Units
Our combi-superbedder is the ultimatecombination machine and isunmatched by any other product onthe market. It consists of our standardsuperbedder frame with a 1300 lbfertilizer distributor, and a high speed plastic mulch layerbehind.
With a combi-superbedder, you can pull and shape a solid
COMBI-SUPERBEDDER
BP480 withoptional 55635single wheel driptape layer
planting bed, apply dry fertilizer (or a liquid fertilizersolution with optional accessories), and lay plasticmulch on the bed at the same time.
With optional equipment, you can lay drip irrigationtape and fumigate the bed while you are shaping itand covering it with mulch.
No other machine is capable of doing all of thesefunctions at once. Imagine making one pass
through the field to shape your bed,fumigate, fertilize, lay drip tape, and lay
plastic mulch!
Part # DescriptionBP480 Combi-superbedder-mulch layer, 1300 lb (591 kg)
hopper, without press pan, custom row centersA three-point Category II hitch is standard. Call our sales department forweights and dimensions and for recommendations on accessories. It isthe customer’s responsibility to determine tractor horsepowerrequirements. Customized row center sizes are available upon requestfrom our sales department.
MICRO-COMBO PLASTIC LAYER
Our micro-combo plastic layer allows farmers with smallCategory I tractors to shape a raised bedand cover it with plastic in a single pass.With optional equipment, you can alsofumigate and lay drip tape all in the same pass.
• Lighter weight, but durable steel construction.• Holds one roll of plastic.
• Does several operations in one pass, saving time andlabor.
• Ideal for smaller tractor, smaller acreage.
Optional Equipment:• Boats or Press Pan• Drip Irrigation Tape Layer• Fumigation Gas Knives
Part # DescriptionBP473 Micro-Combo for up to 48" PlasticBP472 Micro-Combo for up to 60" PlasticBP474 Micro-Combo for up to 72" PlasticBP475 Micro-Combo for up to 80" PlasticFits a standard three-point Category I hitch. Requires boats or press panpurchased separately. Call our sales department for weights anddimensions.
![Page 28: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/28.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©201128
Transplanters
1 BED TRANSPLANTER
We manufacture a variety of transplanters which are verysimple and reliable. Although they are most commonly usedto set plants through plastic mulch, they can also be usedon uncovered planting beds or bare, flat ground. Our designis very simple and versatile.
A floating punch wheel rolls along the surface of the plantingbed. The only pressure on the bed is from the weight of thepunch wheel. Pivoting on a single hinge at the front of themachine, the punch wheel rises and drops with the terrain.The wheel always maintains contact with the planting beduntil lifted by the tractor.
Two types of punch wheels are available. The first punchesa dry hole. The second punches a hole that is wateredwhen it is formed. Most growers prefer the water wheelbecause it means the plant is set into a moist, watered holefor better survival.
The wide variety of options that are available with Kenncotransplanters make them a valuable tool for any producegrower using nursery plants in their production program.
In its standard form, a single row transplanter is suppliedwith two seats for workers and a wheel frame thataccommodates a single punch wheel. The seat framesinclude a tray stand for the tray being used and additionaltray racks for extra trays.
Single row transplanters are available with a 200 gallon (758L) poly tank to carry a water supply or any other type offertilizer mixture. The transplanter is plumbed so that theoperator can adjust the volume of water supplied to thepunch wheel and can turn the water supply off and on asneeded.
There are a variety of options available on our transplanters.Wheel frames can be modified to punch and set two or
TRANSPLANTERS - GENERAL INFORMATION
three rows of plants perplanting bed. Extra trayracks can be added tocarry additional trays,and to stack empty traysso they aren't left lying inthe field. Additionalseats can be added sothat more workers canride the equipment toincrease the plantingrate. Horizontallyfloating wheel framesare available to ensureperfect alignment on theplanting bed. All ofthese options aredescribed later in thissection of the catalog.
Part # DescriptionPS409 1 bed transplanter 5 ft (152 cm) row center -
without tank, without punch wheelPS410 1 bed transplanter 6 ft (183 cm) row center -
without tank, without punch wheelPS413 1 bed transplanter 5 ft (152 cm) row center - 200
gallon (758 L) tank, without punch wheelPS414 1 bed transplanter 6 ft (183 cm) row center - 200
gallon (758 L) tank, without punch wheelPS415 1 bed transplanter custom row center - 200 gallon
(758 L) tank, without punch wheelCustom row centers are available upon request. Punch wheels are notincluded with transplanters and must be ordered separately. Call oursales department for weights and dimensions.
![Page 29: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/29.jpg)
29Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
Transplanters - Multi-Row and Hole Punchers
MULTIPLE BED TRANSPLANTER
Our multiple row transplanters are perfect for largeproducers who need to set a lot of plants in a short period oftime. We offer 2 and 3 bed transplanters as part of ourstandard product line but can fabricate other variationsdepending upon your needs and requirements.
Multiple row transplanters usually work with tractor-mountedwater tanks. Call our sales department for moreinformation.
See the following sections for descriptions of theaccessories that are used with multiple row transplanters.
Part # DescriptionPS421 2 bed transplanter on 5 ft (152 cm) row centers,
frame only, std wheel framePS420 2 bed transplanter on 6 ft (183 cm) row centers,
frame only, std wheel framePS423 3 bed transplanter on 5 ft (152 cm) row centers,
frame only, std wheel framePS425 3 bed transplanter on 6 ft (183 cm) row centers,
frame only, std wheel framePS424 3 bed transplanter on 5 ft (152 cm) row centers,
frame only, free floating wheel framePS426 3 bed transplanter on 6 ft (183 cm) row centers,
frame only, free floating wheel framePunch wheels are not included with transplanters and must be orderedseparately. Call our sales department for weights and dimensions.
Transplanter shown withoptional extra tray racks
There are many production methodsthat do not call for transplanting at theexact moment that the hole is punchedthrough the mulch. For those growerswho simply need to punch holes throughplastic mulch, we make two different styles of holepunchers.
Our PS439 hole puncher is a simple three-point mast thataccepts a floating wheel frame. The side wheels keep thepuncher centered over the planting bed and allow the punchwheels to ride over the top of the bed. This hole punchercan be used with 1, 2 or 3 punch wheels.
Our PS437 hole puncher is popular with growers planting onwider than normal beds, and punching more than three rows
HOLE PUNCHERS
PS439
PS437
of holes. The punch wheels are mounted inside asuspended frame that allows them to float on top of the bedand side to side when necessary. Any number of punchwheels can be mounted inside the wheel frame dependingon the planting bed row center spacing and punch sizes.
Part # DescriptionPS439 Single bed hole puncher, floating wheel framePS437 Single bed hole puncher, suspended framePS448 3 bed hole puncher, fixed wheel frame, any R.C.PS449 3 bed hole puncher, floating wheel frame, any R.C.Customers must specify bed width and row spacing when ordering. Holepunchers most commonly use dry punch wheels. Customer specifiesnumber of wheels, punch spacing, punch depth & width, and punch stylefor planter wheels. Punch wheels are not included with hole punchersand must be ordered separately. Call our sales department for weightsand dimensions.
![Page 30: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/30.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©201130
Transplanters - Wheels and Wheel Frames
Specifying Your Punch Wheel1. How many rows of plants will be on your planting bed? Ifyou have more than one row of plants per bed, you need thesame number of wheels per bed on your transplanter. If youhave more than one row, what is the spacing between therows of plants?
2. What is the distance between plants within the row? Wedo not recommend planting closer than 4 in (10 cm). If yourpunch spacing is too close, the plastic may rip along the lineof punches. In addition, if your punches are too closetogether, the punches may ride on top of the planting bedinstead of punching into the soil. Due to wheel slippage,soil moisture, soil conditions, and various other factors,we cannot guarantee plant spacing to an exactdimension. You can normally expect the actual plantspacing to be within 1 inch (2.5 cm) of the dimensionrequested. The distance from punch tip to punch tip with aflexible tape is very close to your hole spacing in most soils.
3. Which style punch and what size? The punch needs tobe large enough to allow the plant to fit into it, but not solarge that it can't be packed firmly into the hole. Confirm thecell size on your planting trays or pots, and then size yourpunch. As a rule of thumb, size the punch width ½ in (1.3cm) larger than the width of the cell, and the depth 1 in (2.5cm) deeper. For example, if the cell size is 1½ in (3.8 cm)wide by 3 in (7.6 cm) deep, then a punch that is 2 in (5 cm)wide and 4 in (10 cm) deep will work. The sides of thereceiving hole will collapse to some degree after beingshaped. Over-sizing the punch ensures that the holeremains large enough for the transplant.
Stake punches can be added to punch wheels. Call oursales department for help with wheel specifications.
Part # DescriptionPS900 Punch wheel, applies water during punchingPS800 Punch wheel, dryPS992 Transplanter 2nd wheel kitCustomer specifies punch spacing, depth, and style for transplanterwheels. They are not included with transplanters, and must be orderedseparately. Call our sales department for weights and dimensions.
TRANSPLANTER PUNCH WHEELS
“A” Style
“B” Style“C” Style
Stake Punch
Side Front Side Front
“A” Style
FrontSide
Top TopTop
“B” Style “C” Style
PS800 Dry Wheel PS900 Water Wheel
Transplanter punch wheels punch through plastic mulch andmake holes suitable for the type of nursery plants that youare transplanting. Some wheels also water and fertilize thehole to reduce stress caused during planting.
Punch StylesOur “A” style punch is used on dry punch wheels.It punches through plastic mulch and makes adiamond shaped receiving hole. This punch ispopular for setting bare root transplants.
Our “B” style punch is ideal when pullingtransplants from pots. It punches through plasticmulch and removes a round plug from the soil.The punch is tapered so that the soil packed intoit drops out as the wheel rolls. An angled slideunder each punch directs the soil out of thewheel.
Our “C” punch is the preferred punch for nurserytray plants. It makes a square hole at the surfaceshaped like an upside-down pyramid in the bed.It does not remove soil. It can be used on wet ordry wheels. When used on a water wheel, its
design allows water to enter the receiving hole.
Shapes of Punched Holes - Top, Front, and Side Views
![Page 31: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/31.jpg)
31Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
Transplanters - Wheels and Wheel Frames
TRANSPLANTER WHEEL FRAME
TRANSPLANTER EXTRA TRAY RACKS
TRANSPLANTER DOUBLE SEAT FRAME
Wheel frame styles on our transplanters areinterchangeable in order to allow flexibility in wheel setup.The wheel frame is hinged to the front of the planter frameand can be replaced by simply pulling the pin and lifting theplanter over the punch wheels. Depending on row spacing,
we can normally fit nomore than 3 punchwheels per bed intothe planter frame.(Call our salesdepartment if youneed more than 3wheels.)
Horizontally floatingwheel frames are
Additional plant tray racks are frequently added to ourtransplanters. They allow the transplanter to carry manyextra plant trays in the field. This minimizes the number oftrips to reload. Trays full of seedlings are within easy reachof the workers riding the transplanter, who simply pull themfrom a gravity-fed rack. Empty tray receiver racks are alsoavailable to carry the empty trays, rather then dropping themin the field. (Make sure to specify your tray size whenordering plant tray racks and receiver racks.)
Part # Description59001 Extra plant tray rack59002 Empty tray receiver rackBL2220 Planter Tray RackCall our sales department for weights and dimensions.
useful additions to any planter, especially multiple row units.A floating wheel frame keeps the planting wheel centered onthe planting bed so that the plants are set evenly down therow. They are perfect for multiple row transplanters used onbeds that may not be spaced evenly. They allow the wheelframe to move sideways within the planter frame. If thetransplanter drifts off center, the gauge wheels keep thepunch wheel centered on the planting bed.
Part # Description59000 Transplanter wheel frame, standard, single59100 Transplanter wheel frame, floating, single59105 Transplanter wheel frame, standard, double59101 Transplanter wheel frame, floating, double56300 1 in punch wheel bearings59102 Floating transplanter wheel frame hinge pin59120 Gauge wheel axle59110 Mounting clamp for gauge wheel arm55140 Floating wheel frame gauge wheelCall our sales department for weights and dimensions.59000 wheel frame
Planter frame
Extra planttray rack
Emptytrayreceiverrack
The limiting factor on the productivity of a transplanter is therate at which workers can set plants in a bed. One way toincrease production is to add more workers setting plants.
Our double seat frame allows two workers to set plants in abed from the same side. Using two double seat frames,four workers can set plants in a single bed.
Part # Description60122 Double seat frame kit (set of 2)60015 Planter seatCall our sales department for weights and dimensions.
![Page 32: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/32.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©201132
Sprayers
One of the most important implements used in vegetableproduction is a sprayer. At Kennco, we make the mostrugged, durable, and reliable sprayer available. Here's why:
• All of our frames and chassis are fabricated usingoversized steel to make them very heavy duty.
• Whether on a three-point hitch frame or a towed chassis,we galvanize the sprayer instead of painting it.Galvanizing protects the frame much better from chemicalcorrosion and the harsh environment in which sprayers areused.
• We use fiberglass tanks on our sprayers instead of polytanks. Fiberglass does not allow sunlight to enter the tank,minimizing the growth of algae that can clog nozzles andother components. Fiberglass tanks can be repaired andgenerally last longer than poly tanks. Because we usefiberglass tanks, we can install mechanical agitation on oursprayers.
• We install mechanical agitation on our sprayers becausewe believe it is a better way to agitate a tank, particularly alarge tank. If you rely on your pump to agitate yoursprayer tank, then you are taking flow away from yourspray nozzles for agitation. That means that you need ahigher flow pump to spray and agitate at the same time.
• The standard plumbing system on our sprayers consists ofgalvanized or stainless steel pipe and high-pressure 800psi (55 bar) hose.
• We install Comet diaphragm pumps on our sprayers. Wehave found that Comet pumps provide the high pressureand flow requirements our produce customers desire, andthey have proven to be reliable and trustworthy. Otherpumps are available upon request and need.
• Our sprayers are available with various control methods.They can be controlled manually, electrically, orelectronically. Due to the required accuracy andincreasing costs of today's pesticide applications, westrongly encourage customers to consider our electric andelectronic controls on their sprayers.
• We include catwalks on one side of our towed sprayers tomake tank mixing easy and safe. We include a quick-coupled snorkel fill line for refilling the tank, and offer apre-mix option that allows tank mixing without climbing tothe top of the sprayer.
• We offer a variety of customized boom and gantry options.They can be folded manually or hydraulically, raised andlowered manually or hydraulically, or tilted and liftedmanually or hydraulically. Our booms are custom built tomatch raised bed row centers with spray drops for directedspray applications, or they can be set up for broadcastapplications.
SPRAYERS - GENERAL INFORMATION
![Page 33: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/33.jpg)
33Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
Sprayers - Chassis and Tanks
The place to start specifying a Kennco sprayer is the chassisand tanks. We offer a variety of different sizes, from a 200gallon (758 L) three-point hitch sprayer to a 1500 gallon(5,685 L) towed sprayer. 1200 is our most popular size.
Standard features include:• Frames and chassis are galvanized and have oversized
axles. Single axles are standard. Dual-wheel walkingbeam axles are available as an option.
• Includes a catwalk on one side for easy, safe access to thetop of the tank. (Additional catwalks are available.)
• Quick-coupled siphon fill for tank filling is standard.• Towed sprayers have flotation tires on 6 ft (1.8 m) row
centers. Tires are 15 in (38 cm) wide, and give oursprayers an 18 in (46 cm) clearance height. In someproduction systems, our standard flotation tires are toowide to pass between planting beds freely. We offer anarrow profile tire option for this purpose. The narrow tireraises the sprayer for a clearance of about 24 in (60 cm)and leaves a footprint in the soil about 10 in (25 cm) wide.
• Towed sprayers include a 9,000 lb capacity jack stand.• Tanks are of fiberglass construction. (Poly tanks are
available upon request.)• Mechanical agitation using a stainless steel shaft and
paddles is standard in our tanks. Additional agitation isprovided by an eductor nozzle installed onto the bypassline which recirculates flow to the tank. See page 39 formore information on agitation.
Part # DescriptionSM3300 200 gallon (758 L) three-point Category II hitch
sprayer chassis with fiberglass tank, withoutmechanical agitation
SM3210 300 gallon (1137 L) towed sprayer chassis withfiberglass tank and mechanical agitation
SM3220 400 gallon (1516 L) towed sprayer chassis withfiberglass tank and mechanical agitation
SPRAYER CHASSIS AND TANK OPTIONS
A pre-mix tank can be added to any sprayer to provideworkers with a safer way to mix chemicals. Instead ofclimbing to the top of the sprayer, the pesticide is mixed in asmaller tank at ground level, then siphoned into the mainsprayer tank. This system helps begin agitation and mixingin a system designed to do so instead of just “dumping”chemicals into the tank. The system can be ordered withany new sprayer or added to an existing sprayer.Part # DescriptionSM441 Pre-mix tank assembly - Hypro23601 Pre-mix tank for customer installationCall our sales department for weights and dimensions.
PRE-MIX TANK
Part # DescriptionSM3230 500 gallon (1895 L) towed sprayer chassis with
fiberglass tank and mechanical agitationSM3240 600 gallon (2274 L) towed sprayer chassis with
fiberglass tank and mechanical agitationSM3260 800 gallon (3032 L) towed sprayer chassis with
fiberglass tank and mechanical agitationSM3270 1000 gallon (3790 L) towed sprayer chassis with
fiberglass tank and mechanical agitationSM3275 1200 gallon (4548 L) towed chassis with fiberglass
tank and mechanical agitation (our most popular)SM3285 1500 gallon (5685 L) towed sprayer chassis with
fiberglass tank and mechanical agitation20000 200 gallon (758 L) fiberglass replacement tank
with agitation20550 300 gallon (1137 L) fiberglass replacement tank
with agitation21025 400 gallon (1516 L) fiberglass replacement tank
with agitation21550 500 gallon (1895 L) fiberglass replacement tank
with agitation21560 600 gallon (2274 L) fiberglass replacement tank
with agitation21580 800 gallon (3032 L) fiberglass replacement tank
with agitation21590 1000 gallon (3790 L) fiberglass replacement tank
with agitation21593 1200 gallon (4548 L) fiberglass replacement tank
with agitation70001 Dual wheel walking beam axle upgrade for 400-
800 gallon chassis with aircraft tires70002 Dual wheel walking beam axle upgrade for 1000-
1500 gallon chassis with aircraft tires70003 Dual wheel walking beam axle upgrade for 400-
800 gallon chassis with truck tires70004 Dual wheel walking beam axle upgrade for 1000-
1500 gallon chassis with truck tiresThe above part numbers are for assembled sprayer chassis with tanksmounted. They do not include sprayer plumbing, booms or additionaloptions. Call our sales department for weights and dimensions.
![Page 34: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/34.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©201134
ORDERING CONSIDERATIONS
When ordering a sprayer, it is very important to tell our salesdepartment the exact boom dimensions you require. Ourstandard booms are built to spray 3 planting beds on eachside of the sprayer spaced on 6 ft (1.83 m) row centers [E].The wings, or side boom sections, are about 18 ft (5.5 m)long. End to end, the spray boom is about 44 ft (13.5 m)long.
The following information must be provided to our salesdepartment when specifying your spray boom dimensions toguarantee your spray boom is fabricated to fit yourrequirements.• The distance from the center line of the sprayer to the
center line of your first planting bed [F].• The center-to-center row spacing between your planting
beds [E].• How many planting beds you want to spray on each side of
your sprayer.• Whether you are driving the sprayer in a drive row where
no planting bed exists or straddling a planting bed thatrequires center spraying.
• Whether you want to have your gantry mounted on thefront of the sprayer, so that it folds to the rear, or on therear folding to the front. Front mounting is most common.
Part # DescriptionSM3463 Gantry and lift-up boom set, fixed height,
hydraulic tilt, standard 18 ft (5.5 m) side boomsections
SM3462 Gantry and suspended boom set, fixed height,hydraulic fold, standard 18 ft (5.5 m) side boomsections
SM3461 Gantry and suspended boom set, manual heightadjustment, hydraulic fold, standard 18 ft (5.5 m)side boom sections
SM3472 Gantry and suspended boom set, hydraulic heightadjustment, hydraulic fold, standard 18 ft (5.5 m)side boom sections - 24” raise/lower
SM3473 Gantry and suspended boom set, hydraulic heightadjustment, hydraulic fold, standard 18 ft (5.5 m)side boom sections - 30” raise/lower
SM3453 Self-leveling gantry and suspended boom set,fixed height, standard 18 ft (5.5 m) side boomsections
SM3558 Plumbing for center sprayCustom boom lengths are available. Call our sales department forweights and dimensions.
Sprayers - Gantry and Boom Styles
We have many different options for gantries and spraybooms with our sprayers.
Our gantries can be mounted to the front or the rear of oursprayers. Most are mounted to the front so that the boomsfold to the rear of the sprayers and do not interfere with thetractor during turning. Front mounted booms also give the
tractor driver better visibility of the boom position andspraying application.
All of our spray booms are designed to spray over the top offruits and vegetables. They are designed for highclearance, and are available in a variety of lengths to spraya variety of different row spacings.
SPRAYER GANTRIES AND BOOMS - GENERAL INFORMATION
E F
![Page 35: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/35.jpg)
35Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
Self-Leveling booms are designed to keep the spray boomlevel. Similar to our suspended booms, a self-levelinggantry is hinged at the center andfloats freely on this hinge. If onewheel of the sprayer drops into aditch or depression in the field, the boom remainslevel based upon gravity. A hydraulic lock isincluded to lock the boom into place if desired to doso during spraying or transportation. Self-levelingbooms are not recommended for fields that arehilly. They are designed for fields where thesprayer runs through ditches and water-furrows.
SELF-LEVELING GANTRY AND SUSPENDED BOOMS
GANTRY AND LIFT-UP BOOMS
Lift-up booms are our most basic spray boom option. Lift-upbooms are rigidly mounted to the gantry so that the boom isset at a height of about 5 ft (1.5 m) above the soil surface.The booms are folded and unfolded manually and fixed intoplace during spraying. For turning, the booms arehydraulically tilted up to an angle of about 45° from the
gantry. While lifted, the booms will clear fence posts, brushand other obstacles within and near the edges of fields.
Make sure there is plenty of overhead clearance when usinglift-up booms to avoid contact with power lines and otheroverhead objects.
GANTRY AND SUSPENDED BOOMS
Suspended booms give you the option of raising andlowering the spray boom. The height of suspended boomscan be either fixed as with lift up booms or adjustable eithermanually or hydraulically. All suspended booms are foldedhydraulically and supported with heavy-duty chain. As they
are folded to the side of the sprayer, the booms lift to anangle of about 15°. When adjusted manually, the boom canbe adjusted between a height of 5 ft (1.5 m) and 2 ft (0.6 m)in 9 in (22.5 cm) increments.
Sprayers - Gantry and Boom Styles
![Page 36: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/36.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©201136
Sprayers - Spray Drops, Nozzles & Tips
Our standard booms are plumbed using stainless steel pipeto withstand higher spraying pressures and to resistcorrosion. We weld ¼ inch and ½ inch threaded nozzleinlets to the wet boom per your requirements. Instructionson how to space your nozzle inlets are described on page34.
For a broadcast application, nozzle bodies and nozzles canbe threaded directly into the welded inlets. For directedspraying application, we manufacture spray drops thatthread directly into the nozzle inlet between planting rows.The nozzle inlet directly above the crop row is either pluggedby the grower or includes a nozzle to spray the top of theplant.
Our spray drops are constructed with stainless steel fittingsand brass nozzle bodies. They flex at the wet boomconnection because they are hung from high pressure hosewith high pressure hydraulic fittings. They usually includenozzles in four positions spaced 8” (20 cm) apart vertically.
They are available to spray one side or two sides. In theirstandard form, we install TeeJet disc-core nozzles to providea fine spray atomization.
Spray hoods are available to spray herbicides betweenplanting beds in row middles. The spray hood mounts to theboom structure instead of the wet boom for strength. Itconnects to the wet boom by hose for the liquid supply. Thehood is constructed of hanging rubber or cloth at thecustomer’s request. Each hood is sized to match thecustomer’s row middle dimensions.
Part # DescriptionSM375SS Single spray drop ¼ inch pipe, stainless steelSM380SS Double spray drop ¼ inch pipe, stainless steelSM382SS Single spray drop ½ inch pipe, stainless steelSM384SS Double spray drop ½ inch pipe, stainless steel24545 Spray spray drop end stablizer assembly24546 Spray drop mid stabilizer assemblySM359 Herbicide drop asssemblyWe use TeeJet nozzles and components on our sprayers, but can supplyAlbuz, Wilger, Delevan, Greenleaf, and other options upon request. Callour sales department for weights and dimensions.
Single Spray DropDouble Spray Drop
Typical HerbicideSpray Hood
![Page 37: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/37.jpg)
37Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
Sprayers - Pumps and Agitation
Because our sprayers are generally used in applications thatrequire higher spraying pressures and higher volumes, weinstall large diaphragm pumps onto our sprayers.
Our pumps are powered by the tractor's PTO. They includea manual regulating valve that is mounted on the pump forcoarse pressure adjustment. This valve regulates flow to abypass line to increase or decrease your spraying pressure.It is adjusted manually during sprayer setup. Its designallows additional flow to bypass when boom sections areshut off.
Our sprayers are designed to operate best betweenspraying pressures of 150 psi to 400 psi (10-30 bar). Thepumps will reach higher pressures, but spraying atconsistently higher pressures will reduce the life of thepump. If you are interested in spraying at lower pressures,additional bypass lines should be installed onto the sprayerfor this purpose. Alternately, you could discuss other pumpchoices with our sales department.
We have found the Comet pumps we use on our sprayers tobe extremely reliable. With appropriate maintenance, theycontinue to perform as required. When they need to berepaired, the parts are priced very reasonably and arereadily available.
Comet Pump Features• Positive displacement, diaphragm pressurization over oil
bath metal piston with automotive type piston rings.• Uniform flow rate and pressure, unlike high wear leather
cup.• Smooth rotary action, similar to aircraft radial engine.• Pump can be maintained in field without removing it from
the sprayer and requires a minimum number of tools toreplace diaphragms.
• Lower cost than old style leather piston pumps.• Pump is supplied with automatic oiler with visual
inspection, surge damper, and pressure regulator.
Part # DescriptionSM3555 21-36 GPM (136 L/min) diaphragm pump installed
complete by KenncoSM3557 36-50 GPM (190 L/min) diaphragm pump installed
complete by Kennco41700 14-26 GPM (98 L/min) diaphragm pump for
retrofit, pump only41705 21-36 GPM (136 L/min) diaphragm pump for
retrofit, pump only41784 36-50 GPM (190 L/min) diaphragm pump for
retrofit, pump onlyAlthough most of our sprayers are equipped with Comet pumps, we areable to supply you with pumps manufactured by Hypro, Ace, Delevan,and other manufacturers. Call our sales department for weights anddimensions. Contact our parts department directly for replacement parts.
A stainless steel shaft and paddles are driven off the pumpPTO shaft to agitate our tanks. The system is easy tomaintain and very reliable. Two paddles are mounted withineach baffled tank section. Additional baffles are availableupon request.
Typical Comet pump installation
Agitation drive mechanism (Guard removed for clarity)
Agitation inside tank. Note black eductor nozzle at left.
![Page 38: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/38.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©201138
Recirculation to tank
Flow to spray boom3-way electric valve
Quick-connect
Control panel
Sprayers - Electric Valves
While manual on-off and pressure regulating valves aresupplied as standard components on our sprayers, many ofour customers use sprayers with electric valves. Electricon-off and pressure regulating valves are recommendedoptions for sprayers because they provide greater levels ofsafety and convenience to the sprayer operator.
In today's agricultural environment, electric valves are thebest way to operate a sprayer.
Electric valves are powered by the tractor's 12 volt powersupply and are controlled with toggle switches in the cab ofthe tractor. There are no chemical lines running to thetractor, therefore there is no risk of chemical exposure to theoperator or corrosion to the tractor if a line breaks or leaks.Because the operator can easily control the pressure andflow of the sprayer with toggle switches, he can makeadjustments to the application on-the-fly and pay moreattention to operating the tractor.
Kennco's standard sprayers that are set up for directedapplications to the left and right of the sprayer require ourSM420 valve kit. This allows the operator to shut off the left
and right boom sections independently. The kit does notinclude a pressure-regulating valve, but one can be added.Valve kits can be ordered with new sprayers, or purchasedas retrofit kits and installed by the customer.
The electric valves that we use on our sprayers are rated fora maximum spraying pressure of 800 psi (55 bar). Thismakes them suitable for the higher spraying pressurescommon in vegetable production.
Consult with our sales department for more information andspecifications on our electric sprayer valves.
Part # DescriptionSM421 Electric valve kit installed onto new sprayer, single
valve control, on-off onlySM420 Electric valve kit installed onto new sprayer,
double valve, left and right control, on-off onlySM431 Retrofit electric valve kit for existing sprayer,
single valve, on-off onlySM430 Retrofit electric valve kit for existing sprayer,
double valve, left and right control, on-off onlySM433 3rd valve option for sprayer plumbed with center
spray option70025 2-way electric motorized ball valve, on-off24996 3-way electric motorized ball valve, on-off with
bypass70026 Electric pressure regulating valveSM436 Remote electric switchbox for single valve controlSM435 Remote electric switchbox for double valve controlSM437 Remote electric switchbox for triple valve controlCall our sales department for weights and dimensions. KZ valves arestandard on our sprayers because they are rated above 300 psi. Forlower pressure applications, we can supply you with valves from TeeJetand other manufacturers.
SM43770025
![Page 39: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/39.jpg)
39Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
Sprayers - Electronic Control System
An electronic rate control is an important addition to anysprayer. The rate control makes the sprayer a precisionapplicator, which is necessary in today's crop protectionenvironment.
We offer a rate control option on our sprayers that sensesthe ground speed of the sprayer and flow rate to the spraybooms. It automatically regulates spraying pressure toensure that the application rate remains constant. If thetractor driver speeds up or slows down, the rate controlkeeps your application rate constant. If the driver shuts offone side of the spray boom, the rate control keeps theapplication rate constant on the boom still spraying.
This is an important feature on any sprayer. Keeping theapplication rate constant minimizes instances of chemicalover-application that waste chemicals or cause cropdamage. It minimizes instances of under-application thatcan reduce the effectiveness of the chemical or requireadditional applications.
The rate control we offer for our sprayers consists of acomputer switch box that mounts inside the tractor cab, amagnetic speed sensor mounted near the sprayer wheel, aflow meter mounted on the sprayer, electric valves mountedon the sprayer, and a junction box for all component wiring.
The rate control console itself is very simple to program andoperate. During spraying operation it displays tractor speed,spraying pressure, actual GPA (L/Ha) application rate,gallons (liters) sprayed, and acres (hectares) sprayed.
Call our sales department to discuss the benefits andfeatures of our automatic rate control system. We believeyou will find that it is the best investment you've ever madefor a sprayer.
Additional features:• Manual mode of operation to give sprayer control to the
tractor driver• Visible warnings if application rate is not accurate• Single cable connection between tractor and sprayer for
quick hook up and disconnect• Stainless steel high-pressure flow meter• High-pressure electric valves for shut-off and pressure
regulation• Simulated operation mode for training, setup, and testing
Part # DescriptionSM432 Complete control system installed by KenncoSM433 3rd valve option for center spraying.SM434 Control system installed on used sprayer70029 Control console70027 Junction box assembly70025 Electric shut-off valve70026 Electric regulating valve70023 Flow meter70024 Speed sensor70022 Main cableCall our sales department for weights and dimensions.
70029 Control Console
70023 Flow Meter
70024 Wheel Speed Sensor
70026 ElectricRegulating Valve
Weatherproofconnection box
Control consolemounts in tractor cab
Cable connectstractor to sprayer
Valves controlindividual booms
HighPressureFlowmeter
Flowtoboom
Wheelspeedsensor Valve
adjustsflow
Sprayer Gantry
![Page 40: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/40.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©201140
Sprayers - Related Equipment
SELF PROPELLED SPRAYER
High clearance sprayers are used by many growers who donot use drive rows or trench irrigation in their productionmethod. When producing tall growing crops, or using stakeproduction, a high clearance sprayer is necessary to spraythese crops.
We custom build high clearance sprayer for our customers.If a customer can provide an older tractor, we will "lift" it toprovide a clearance of 5 ft (1.5 m) and add a spray platform.By adding our standard spray booms and plumbing, weproduce a self-propelled, high-clearance sprayer. Byconverting a piece of equipment that was, in most cases,not being used on the farm, the grower can pick up a newpiece of equipment at a significantly lower price than if hewere to purchase a new sprayer.
Contact our sales department directly to discuss yourinterest in converting a tractor into a high clearance sprayer.
NURSE TANK / NURSE TRUCK
We have made a variety of nurse tanks and water wagonsfor our customers. Because our sprayers usually hold over1,000 gallons (3,790 L), our nurse tanks are typically 3,600gallons (13,644 L) to efficiently bring water to the field.
Our fiberglass tanks have the strength necessary for a tankof this size, and fiberglass constructionminimizes algae growth while the tank is holdingwater. We make them large and durable. Call
our sales department to discuss size options.
We can build your nurse truck on an existing truck chassis,or a new one.
![Page 41: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/41.jpg)
41Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
Our Weed Wipe pumps herbicide onto the blue nylon fabricwipers to saturate them. As you drive through the field,herbicide is wiped onto the surface of weeds. The wipingprocess gives excellent application control with no driftingonto your crop.
Kennco custom builds the weed wiper to fit your specificneed, whether you are weeding an entire field or just yourrow middles.• Kills the weeds without damaging your crop.• Economical - herbicide is applied only where it is needed.• Works in windy conditions.• Can be customized for your bed width and spacing.• Tank sizes for your specific needs.
Part # DescriptionWW0200 Weed Wipe Frame Assy - 200 GalWWCB01 Weed Wipe Center Boom-Spec WidthWWP01 Weed Wipe 6 Spline PTO Pump KitWWRB01 Weed Wipe Row Middle Boom AssyWWRM01 Weed Wipe Row Middle WipeCall our sales department for weights and dimensions.
WEED WIPE
Sprayers - Related Equipment
Our decontamination station is a tool designed to help youkeep workers safe and comfortable in the field.
Features:• 200 gal fresh water tank• Correct amount of flow at wash stations• Stainless steel sink with three faucets• Self contained eye wash station• Soap dispenser• Plastic storage cabinet for supplies• First aid box• Garbage can holder• Full body emergency wash station• Platform for porta-potty• Used water collection tank• Towable to move from field to field
Customization options are available. It can be towed behindany tractor, pickup truck, or vehicle for movement from fieldto field. Chassis is not for highway transportation.Consumables not included.
Part # DescriptionSM600 Decontamination stationCall our sales department for weights and dimensions.
DECONTAMINATION STATION
![Page 42: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/42.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©201142
Cleanup Tools - Mulch and String Burners
Plastic mulch can be burned with our towed burning rigwhile it lies on the planting bed. Our SM400 burning rig is achassis designed to carry a 500 gallon or 1000 gallon (1895or 3790 L) propane tank, which is supplied by the customer.To the rear of the chassis is a boom that swings to one sideof the equipment. This boom carries two million BTUburners on it. When set at the correct pressure, the burnerswill vaporize the plastic mulch. There is no lifting orremoving mulch from the field with this piece of equipment.
An additional benefit of our burning rig is that it burns stringand dead vines from stakes. The heat from the burnerscleans the stakes and leaves them free and undamaged sothat you can follow with a stake puller and remove themfrom the field.
To be successful with any type of burning rig, it is importantto remember several factors. If the plastic mulch is wet andcovered with a large volume of dead fruit or trash, you mayfind that you cannot burn 100% of the mulch. Many of ourcustomers lift the mulch from several beds and collect it into
one bed, allow it to dry, and then pass over it with a burner.Pay close attention to burning pressure and field conditionsfor best results.
Part # DescriptionSM400 Burner chassis 500 gallon (1895 L)SM500 Burner chassis 1000 Gallons (3790 L)SM409 Burner valvesSM410 Burner valve and plumbing kitSM404 1 row burner boom (specify left or right handed)SM402 2 row burner boom (specify left or right handed)SM403 3 row burner boom (specify left or right handed)SM406 Burner boom rear mount62500 Burner, two million BTU62600 Burner clamp to mount burner to boom62630L Burner alignment flag to adjust burner angle LH62630R Burner alignment flag to adjust burner angle RHBurning rigs are towed by a tractor’s drawbar. Customer must supplypropane tank. It is the customer’s responsibility to follow all local burninglaws and restrictions when using this equipment. Call our salesdepartment for weights and dimensions.
PLASTIC MULCH INCINERATOR
Many growers remove mulch by hand or with lifters but donot have a location to dispose of it. Our SM397 is a portablepropane fired incinerator that can be used to burn mulchquickly and inexpensively. Using a 500 gallon propane tankand 2 million BTU burners, mulch is completely incineratedwith little or no residue left in the field.
Part # DescriptionSM397 Plastic mulch incineratorBurning rigs are towed by a tractor’s drawbar. Customer must supplypropane tank. It is the customer’s responsibility to follow all local burninglaws and restrictions when using this equipment. Call our salesdepartment for weights and dimensions.
PLASTIC BURNER
![Page 43: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/43.jpg)
43Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
Cleanup Tools - Stake Puller
Stakes represent a large investment for any vegetable cropthat uses them. It is important to minimize breakage andmaximize the life of the stake. Our stake puller does exactlythat.
It uses a double chain conveyer that is timed to match thetractor speed. It grabs the stake and pulls it vertically fromthe soil without breaking it. Once it is pulled from the soil, itis transported and dropped into a hopper for bundling. Afterit is bundled, the hopper can deposit the bundle at the sideof the field.
Our stake puller will create 1,000 stake bundles and carriesits own hydraulic reservoir to minimize reliance on thetractor’s system. Customized row centers and stake sizesare available. You will find that a stake puller pays for itselfin a single season with the speed it can pull stakes andreduced stake breakage.
Part # DescriptionSP10160 Stake puller w/dump bin for up to 60 inch stakesSP10178 Stake puller w/dump bin for up to 78 inch stakesCall our sales department for weights and dimensions.
STAKE PULLER
![Page 44: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/44.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©201144
IRRIGATION DRIP TAPE RETRIEVER
Our drip tape retriever is used by growers to pull andremove irrigation tape from the field for disposal or reuse. Itincludes a platform for a worker who supervises and guidesthe rolling of the tape and reloads the reels. It is powered bythe tractor’s hydraulic system and includes a flow regulatorto speed up or slow down the reel speed.
Attached to the three-point hitch of a tractor, the retriever ismoved from one bed to the next at the edge of the field.The operator attaches each line of tape to the reel and thensupervises its collection.
Part # DescriptionPS612 Irrigation drip tape retrieverOur standard irrigation drip tape retriever fits a standard three-pointCategory II hitch. Call our sales department for weights and dimensions.Customization is always available.
Cleanup Tools - Bed Mower
Our bed mower is the ideal tool to mow vegetation or weedsthat have grown over the plastic after harvest, so you caneasily remove plastic mulch, or plant a second crop.
• Rigid large diameter mowing drum sheds vines.• Reversable blades double time between sharpening.• Durable PTO powered gearbox drive.• Adjustable gauge roller keeps blade height just right.• Adjustable height support tires.
BED MOWER
Part # DescriptionPS600 Bed MowerCall our sales department for weights and dimensions.
![Page 45: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/45.jpg)
45Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
PLASTIC MULCH LIFTER
A plastic mulch lifter is used to remove mulch from the field.The side coulters align with the edge of the buried mulchand slice the weeds and other trash that hold the mulch inthe soil. Properly adjusted, with a short top link on thethree-point hitch, the plow points lift the mulch from the soiland shake the soil and weeds off of it. The lifter leaves themulch lying loosely on top of the planting bed, making iteasier to pick up for disposal. A center coulter is available toslice the mulch into two pieces. All coulters and plow pointsare adjustable to accommodate any size planting bed.
Also available is a mulch lifter with propane burners. It uses2,000,000 BTU burners to vaporize the mulch as it is liftedfrom the soil. This is an excellent way to dispose of themulch in the field. Our mulch lifters are also available asmultiple row units.
Part # DescriptionPS608 1 bed plastic mulch lifterPS607 2 bed plastic mulch lifterPS609 3 bed plastic mulch lifterPS611 1 bed plastic mulch lifter with burnersPS610 Center coulter optionCustomer must supply propane tank. Our standard plastic lifters fit astandard three-point Category II hitch. Call our sales department forweights and dimensions. Customization for your specific needs isalways available by contacting our sales department.
PS611
PS610
PS608
Cleanup Tools
![Page 46: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/46.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©201146
Cleanup Tools - Plastic Mulch Retrievers
ONE ROW & TWO ROW PLASTIC MULCH RETRIEVERS
Our plastic mulch retrievers allow you to lift, roll, and dumpyour plastic mulch and drip tape in one pass with only twoworkers. Side coulters are aligned with the edge of theburied mulch and slice the weeds and other trash that holdthe mulch in the soil. The plow points loosen the mulchfrom the soil. Hydraulically driven cones roll up the plasticand shed trash. The cones separate to drop the rolledplastic where you want it.
A center coulter is available to slice the mulch into twopieces. All coulters and plow points are adjustable toaccommodate any size planting bed.
• Stainless steel cones are durable and prevent plastic fromsticking.
• Holds up to 6000 linear feet of plastic mulch for fasterremoval.
• Drops plastic at end of row, or where needed, in a compacteasy to remove roll.
• Adjustable plow points and coulters to work in almost anyenvironment
• Precision hydraulic control of drum speed.
PS614 Two-Row Retriever
Our two row plastic mulch retriever is designed to work onbeds with row centers up to 50”. It allows you to lift, roll, anddump two rows of plastic mulch and drip tape in one passwith only two workers.
• Can hold up to 12,000 linear feet (in two rolls) of plasticmulch for faster removal.
• Can also be used as a one row retriever for wider rowcenters.
Part # DescriptionPS613 1 Row Plastic RetrieverPS614 2 Row Plastic RetrieverPS615 Gauge Wheel Kit for PS614 OptionPS610 Center Coulter Blade OptionCall our sales department for weights and dimensions.
PS613 Dropping Roll of Plastic
![Page 47: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/47.jpg)
47Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
FIELD HARVESTING CONVEYOR
THREE-POINT HITCH MOUNTED LIFT BOOM
Our lift boom is a simple tool that every farmer should have.It hooks to the three-point hitch of your tractor and is aneconomical means of lifting equipment up to 2500 pounds.If you can't afford a forklift, and don't have a tractor with abucket loader, this is a handy tool.
Part # DescriptionPS360 Three-point hitch mounted lift boomOur standard lift boom fits a standard three-point Category II hitch. Callour sales department for weights and dimensions. Customization isalways available by contacting our sales department to express yourspecific needs and wishes.
A produce conveyor is a popular item among our customersthat harvest crops such as lettuce or cabbage. The unitunfolds in the field and is pulled by a tractor’s three-pointhitch. Workers follow the conveyor and load it with theproduce that they have harvested. Powered by the tractor’shydraulic system, the belt moves the produce across theconveyor to a second conveyor which lifts the produce to atruck or wagon movingbeside it through thefield. The conveyor canbe folded for transportbetween fields andincludes lighting for night or early morning operation.
Specialty Equipment
STAKE CART AND STAKE DRIVER CART
Stake drivers are a tremendous labor-saving tool. Using anindustrial air compressor and air-hammers, workers candrive stakes into soil mechanically. Using our stake driverallows your workers to set stakes much more quickly thandriving them by hand.
A stake driver cart carries an air compressor (usually rentedfrom a local industrial supply house). It includes booms thatswing to the side and carry air lines to the air hammers.The hammers are suspended over the top of each plantingbed, typically three to each side, for use by your workers.The stake driver cart can be built to carry stakes or follow astake cart on a separate tractor.
Stake carts are useful for growers who specialize intomatoes or other crops that require stakes. A stake cartattaches to a tractor and is loaded with tomato stakes. Thecart extends to the side of the tractor over three plantingbeds so that workers have the stakes within easy reach forthe bed where they are working.
Part # DescriptionPS300 Stake cart 28 ftPS325 Stake driver cart 36 ftStake carts are towed by a tractor’s drawbar. Call our sales departmentfor weights, dimensions, and customization.
PS300PS325
![Page 48: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/48.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©201148
Specialty Equipment - Frost-Off Foam Applicators
Our Frost-Off Insulating Foam System is engineered toquickly produce large amounts of non-toxic insulating foamto cover your plants. Insulating foam works for short-termcold protection. It won’t protect your tender plants for weeksat a time, but it is very effective against quick frosts orfreezes in late fall or early spring. It protects the plant fromdirect contact with the cold air, and retains ground heat thatwould otherwise be lost.
No additional heat or irrigation is required to protect theplants. The foam is stable at cold temperatures, but breaksdown rapidly when it warms up, so no labor is required forremoval.
Testing on live plants at the University of Florida researchstation under the guidance of the USDA has shown thatinsulating foam is much more effective at protecting plantsthan shade cloth, almost completely eliminating colddamage to plants during a 24°F night.
Our 35 and 100 gallon applicators are designed for nurseryand landscape use. The 600 gallon unit is for vegetablefields.
Part # DescriptionFM0035 Towed Nursery Kit 35 gallon, 1 BlowerFM0100 Skid Mount Nursery Kit 100 gallon, 2 BlowersFM0601 Field Foam Machine 600 Gallon capacityFM1000 Backpack Blower AssemblyFoam applicators require foam making chemicals, not provided byKennco. Call our sales department for chemical sources, weights,dimensions, and customization.
FROST-OFF
FM0035 35 Gallon Single Applicator
FM0100 100 Gallon Dual Applicator
![Page 49: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/49.jpg)
49Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
Specialty Equipment - Agmaster Citrus Loader
In addition to our vegetable production equipment, we alsomanufacture loaders for harvesting citrus. If you know ourreputation in vegetable production, then you will be pleasedwith the durability and quality of our Agmaster citrus loader.
What makes our loader different from other brands on themarket is that the motor that rotates our lift boom is locatedoutside the support tower. We use a heavy duty gear andbearing instead of a rotary actuator. This makes our productmuch easier to service and repair when necessary.
Features include:• Interchangeable heads for square fresh market bins and
round (10 box) processing tubs• 12 foot (3.6 m) reach from the lift boom• Lift boom has a load bearing capacity of 8,300 lbs at 12
feet, and a hydraulic lifting capacity of 1800 lbs at 12 feet• Boom rotates a full 360° with a stop at front of truck hood• Hydraulic boom rotation motor can be removed or adjusted
without having to disassemble the boom and tower• Hi-Lift box has 90 box capacity; larger options are available• Box sides can be lifted from the truck to provide a flat bed
for hauling fresh fruit bins• Position of the control valve bank is adjustable for operator
convenience• Includes a safety stand for working under raised box• Includes safety features such as mirrors and beepers for
backing in the grove• Industry standard components for parts replacement from
any industrial supply house
We also modify or refurbish existing citrus loaders. If thechassis of your loader wears out, or the engine no longerruns, we can strip and prepare a new chassis and move theexisting lift boom and box to the new chassis. If you have agood chassis but need a loader, we can install a new liftboom and box on that chassis.
In addition to our standard product, we also customize ourloaders to meet the needs of customers who harvest citrusmechanically. We produce different sized lift boxes to carrymore citrus and follow a mechanical harvester. Contact oursales department to discuss your special requirements.
Part # DescriptionAM2006 Agmaster with customer’s prepared chassisAM2007 Agmaster with customer’s unprepared chassisAM3000 Agmaster loader complete with hydraulicsAM3001 Hi-lift box, removable sidesAM3002 Juice head for round tubsAM3003 Minute maid front, with exchange of stock hoodAM3004 Hot shift PTO with new unitAM3005 Fresh fruit head with GV3 rotatorAM3006 PTO drive gear in transmissionAM3007 Strip and prep customer’s supplied chassisCall our sales department for weights and dimensions.
![Page 50: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/50.jpg)
Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©201150
Parts and Other Services
Kennco equipment isdesigned to provide thelongest possible service,but parts eventually wearout and accidents dohappen. All of the partswe put into ourequipment are availableas replacements fromour parts and salesdepartments.
In addition to replacement parts for Kennco products, wecan supply a wide variety of common parts used inagricultural equipment.
• We are an authorized TeeJet distributor and can supplyany item in the TeeJet product line.
• We are a distributor for Comet pumps and stock manyComet repair parts.
• We have access to most sprayer componentmanufacturers’ product lines.
• We can supply Federal Mogul parts such as bearings andseals.
• We stock special tillage tools such as sweeps, disks,blades, and knives.
PARTS
CUSTOM FABRICATION AND MANUFACTURING, AND EQUIPMENT REFURBISHING
In addition to making a completeagricultural product line, Kenncois also an industrial fabricator andcustom manufacturer. We canprovide you with a wide variety ofcustom fabricated and machinedparts. Our machine shopincludes several pieces of CNCequipment to make yourprecision parts. We havecertified welders with many yearsof fabrication experience. Wehave sheet metal and steel platecutting equipment.
We also refurbish equipment forour customers. If you have anold piece of equipment, whethera Kennco product or not, we canrefurbish it so that it works likenew.
• We carry a variety of different chains and conveyorcomponents.
• We handle special gear boxes.• We carry a wide variety of parts for hydraulic systems such
as hose, fittings, flow control valves, cylinders, and repairkits.
• We can supply structural steel and flat stock cut to fit yourneeds.
• We carry a variety of drive line components such as PTOshafts, U-joints, and yokes.
• We stock a wide variety of plumbing fittings in PVC, steel,poly, and stainless steel.
We make everyeffort to keep mostof these items instock. If you needan item not currentlyin our inventory, wecan still get it for youquickly and at acompetitive price.Contact either ourparts department orsales department for your parts needs.
Our machine shop is equippedwith the latest technology and
precision CNC equipment.
Our certified welders are experiencedin carbon, stainless steel, and
aluminum welding.
Our welders are accustomedto a wide range of projects.
Big projects are no problem in our15,000 square foot assembly building.
![Page 51: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/51.jpg)
51Kennco Mfg., Inc. • PO Box 1149 • Ruskin FL 33575 • 813-645-2591 • Fax 813-645-7801 • [email protected] • www.KenncoMfg.com • ©2011
Our Sales Approach:Kennco has a specific step-by-step approach to each saleso that we can offer our customers the highest level ofcustomer satisfaction.• Assess and analyze your needs• Find solutions to save you money• Give our recommendations for the best equipment• Review your order and confirm it with a signed quotation• Receive deposit• Manufacture your equipment to your specs• Inspect equipment prior to release• Deliver equipment• Make follow-up• Provide support
PricingDue to the nature and constant changes in our productofferings, we cannot publish our price list. Prices aredetermined by the specifications of your equipment as wellas the volume and the type of purchase made. Prices aresubject to change without notice. Quotes are good for 30days.
Credit PolicyTo begin production of your equipment we require receipt ofa deposit equal to 1/3 of the product value ordered. Thebalance of payment will be required prior to shipment,unless you have an establish credit account with us.Payment can be made with a credit card, check, or banktransfer. All payments must be made in United Statescurrency.
WarrantyYour Kennco Equipment is warranted to be free frommanufacturing defect for one year from date of purchasewith certain limitations. If your equipment has an obviousdefect in labor or materials when new, we will replace thedefective part regardless of whether we made it orpurchased it and installed it.
Once you have used the equipment, we limit our warranty toparts of our own manufacture. Some assemblies mayinclude pumps, engines, batteries, and valves, driveassemblies, gearboxes or other major components, whichwe purchase and use but do not manufacture. We will passthe manufacturer's warranty on to you. Any component partmanufactured by Kennco is warranted to be free fromdefect for a period of one year.
If you have a warranty claim please contact your salesrepresentative immediately and before you do anything tothe equipment. Once equipment or parts have been alteredwarranty is void.
Terms and Conditions of Sale
ShippingAll orders that are shipped, are packaged and secured tothe best of our ability. They will be shipped per customerrequest via UPS, FEDEX, Box Truck, Flat Bed, or Kenncodelivery. Customer is responsible for inspecting equipmentBEFORE signing for it. If any parts are missing or damagedit is the customers responsibility to refuse shipment, ormake note of damage with the shipper. If no documentationof claim is made with the shipper at the time of deliveryKennco is not responsible for loss or damage.
FinancingKennco’s equipment has been pre-approved by SunTrustLeasing. If you are interested in financing your equipmentthrough Sun Trust ask your sales representative for a SunTrust Credit Application. You will work directly with Sun Truston the approval and financing process.
ReturnKennco does not accept returns of used, damaged, specialorder or customized parts and equipment. A 15% restockingfee is applied to items returned in like-new condition. Creditis issued, minus freight costs and restocking fees, after theitems are received.
Customer ResponsibilityAfter delivery, the customer takes responsibility for any lossor damage made to the products. The customer will assumethe risks and obligations of full ownership. Kennco and itssuppliers will not be held responsible for any claimsregarding material loss or damages to a person caused bythe ownership, the use and the operation of the products orby any services rendered by means of said products.
Kennco is not responsible for misuse of our products, orneglect or wear and tear. It is your responsibility to maintainthe equipment and to keep it from premature failure orbreakage. It is your responsibility to keep guards andprotective devices on the machines at all times while beingused. It is your responsibility to make sure that all warningguards and decals remain legible and attached to themachines. It is your responsibility to train operators of themachines and to instruct them in general safety practices. Ifyou would like replacement or additional warning stickers ordecals, then ask us for them. We will provide them to you atno charge.
![Page 52: Kennco Catalog 2011-08-31 · BP080 14 ft (4.3 m) wide box blade scraper Standard box scrapers are pulled from the tractor drawbar. Hydraulically operated equipment is supplied with](https://reader034.fdocuments.net/reader034/viewer/2022042120/5e9a3e6ba9fb3100d347b2a8/html5/thumbnails/52.jpg)
ADVANTAGES OF USINGPLASTIC MULCHES ANDDRIP IRRIGATION FOR
VEGETABLE PRODUCTION
1. Increased soil temperature: At a 2 inchdepth; typically 4º to 5º F under black mulchor 8º to 10º F under clear mulch.
2. Reduced soil compaction: Soil underplastic mulch remains loose, friable andwell-aerated. Roots have access toadequate oxygen and microbial activity isexcellent.
3. Reduced fertilizer leaching: Water runs offthe impervious mulch resulting in maximumutilization of the fertilizer.
4. Reduced drowning of crops: Water is shedfrom the row area and excess water runsoff the field thus reducing drowning andother excess soil water stresses.
5. Reduced evaporation: Soil water does notescape from under plastic mulch. Plantgrowth on mulch is often at least twice thaton bare soil. The resulting larger plants willrequire more water, so mulching is NOT asubstitute for irrigation.
6. Cleaner product: A mulched crop iscleaner and less subject to rot due to
elimination of soil splashing on the plantsor fruits. Note: Beds should be firm andtapered away from the row center. Plasticshould be tight to promote runoff. Thereshould be no puddles on the mulched beds!
7. Root pruning eliminated: Cultivation is notnecessary except for the area between themulched strips. Therefore, roots are notpruned.
8. Reduced weed problems: Black plasticmulch provides good weed control in therow. Clear plastic will require use of aherbicide or fumigation. Weeds betweenmulch strips can often be controlled by aherbicide.
9. Earlier crops: Black plastic mulch canresult in 2 to 14 days earlier harvest whileclear plastic can result in a 21 day earlierharvest.
10. Increased growth: Plastic mulch ispractically impervious to carbon dioxide(CO2), a gas that is of prime importance inphotosynthesis. Very high levels of CO2
build up under the plastic, because thefilm does not allow it to escape. CO2 has tocome through the holes made in theplastic for the plants and a "chimneyeffect" is created, resulting in localizedconcentrations of abundant CO2 for theactively growing leaves.
Represented by:
2011-10-07