3

Keller & Kalmbach

Dear Reader,

It is time that you get to know Keller &Kalmbach!Founded in 1878 in Munich, Keller & Kalmbach is today one of the top addresses for fastenersand fixing technology in Europe. When mygrand father took over the company in 1908, itwas a whole saler of screws and ironmongery for smiths and lock smiths. Even today, themetalworking trade represents an importantgroup of cus tomers.After the war, my father concentrated on ex -panding the business into the industrial sector, focusing particularly on the automobile industryand mechanical engineering areas. In the last 40 years, under my management, the businesshas gained in strength by expanding with sub si -diaries in Southern Germany for the trade sector.With its aquisition of Widex in 2001, Keller &Kalm bach was able to establish itself in theindustry sector in West and North Germany andeven become a market leader in the railwayindustry. With the development of innovativelogistics concepts, Keller & Kalmbach has beentrend-setting for the last 30 years. In recentyears, it has focused on establishing an inter -national presence. Keller & Kalmbach is current-ly represented by 10 branches in China andthroughout Eastern Europe.Keller & Kalmbach has been a byword for reli -ability and quality since 1878. We enable our cus to mers to be more successful with cus to m -ized solutions. We act responsibly towardsemploy ees, suppliers and the environment. And we enjoy our work! This is therefore our philosophy: fit. fair. friendly.

We would be delighted to be able to welcomeyou as one of our satisfied customers.

Dr. Florian Seidl

3

5

Z

Centre of Distribution HilpoltsteinThe logistic centre in Hilpoltstein, close toNürnberg, was opened in 2009. The ware -housing and distribution centre, with its highlydynamic divisions and record numbers ofreceipts and issues, is among the most modernin the business sector.

- Investment Euro 22 million- Total area 44,000 m2

- Grade of service 99%- 24-hour delivery for orders received by 3 p.m.- 300,000 storage slots in the automatic small parts storage

- 72,000 storage slots in the fully automatic high rack pallet storage

- Extendable storage and service capacity in a modular fashion

4

Broad product range- 100,000 inventory items in the core product range

- 30,000 special parts and drawing parts- 900,000 industrial parts

Core competence C-parts management- Innovative and customized procurement, inventory and supply systems

- More than 30 years experience- 2,000 completed projects- 2,200,000 bin fillings a year- Up to 80% cost reduction- Integration of special parts and drawing parts, as well as industrial parts

- Innovative eBusiness solutions

In 1878, Keller & Kalmbach was founded inMunich as a wholesaler for screws and sup-plies for smiths and is now among the leadingwholesalers for joining elements and fasteners,tools, hoists, personal protection equipmentand works equipment. The group includesnumerous branches in Germany and abroad.

Numbers, dates and facts- Turnover Euro 333 million- 900 employees- 20,000 customers- 20 locations (some with sales outlets)

Business sectors- Manufacturing industry- Rail industry- Automotive- Trade

Certifications- DIN EN ISO 9001:2015 - VDA 6.2- DVS EN 15048- EMAS- Bavarian Quality Prize 2001 and 2010- IRIS- A-list supplier to renowned companies such as Audi, AGCO-Fendt, Siemens, Krones, VW, ZF etc.

77

Product range

FastenersScrews, nuts, bolts, washers, pins, split pins,graded ranges, caps, feather keys, split was-hers, blind rivets, threaded rods, wood con-nectors and other small parts.

Fixing technologyDowels, anchors, heavy-duty fasteners, chem -ical fasteners, special fasteners, hollow fas teners, adhesives, wood fasteners, hooks,clips, nails, angles, perforated plates, joint hangers etc.

Hand toolsAssembly tools, drilling and machining sys-tems, grinding and isolation technology, solde-ring and welding technology, metrology, con-struction tools, clamping systems, compressedair tools, tools for sanitary applications, hea-ting, electrical etc.

Chemical-technical productsMaintenance products, chemicals used in con-struction, paints and paint removers, adhesivesand sealants, adhesive tapes, corrosion pro-tection, coolant-lubricants, oils, greases andlubricants, PU foams, cleaners etc.

108

Special parts and drawing parts

Since the beginning of the 1960s, special partsand drawing parts have been among Keller &Kalmbach's core competences. Today, we man -age more than 30,000 customer-referenced parts.

Turned and milled partsKeller & Kalmbach produces turned compo-nents to prototypes or drawings on state of theart precision turning machines, for all kinds ofapplication, in all materials and with all types of surface finish. Even complicated geometriesand special materials are included in the pro-gram.

Extruded partsCold-formed parts and special screws are pro-duced on multi-stage presses from shapedsteels and non-ferrous metals in all conventio -nal strength classes, including recutting. Hot-formed parts, using corrosion-resistant, heat-resistant, heatproof steels and alloys, are offered in complex shapes.

Stamped and bent partsBased on requirements, Keller & Kalmbachoffers, in a simple design or in demanding shapes, stamped, perforated, drawn or bentparts. Whether steel, stainless steel, springsteel, bronze, copper, brass or plastics, any-thing is possible in technically feasible thick-nesses. Combined stamped, bent and embos-sed parts are available. Small production runscan also be cut by water jet or laser.

The partnership route to successWorldwide co-operation with manufacturers is the basis for implementing their individualrequirements. Our application technicians, withexperience in mechanical engineering as wellas in industry, railway engineering, electricalengineering and the automotive sector, will bepleased to consult with you and work togetherwith you on customized solutions.

Power toolsElectrical tools for drilling, dividing, screwing,grinding, cutting, welding, sawing, suction,tacking, stirring, loading, cleaning, powergene ration etc.

HoistsSlinging equipment, load-securing equipment,chain components, wire rope, commercialchains, electrical and compressed air hoists,hand hoists, hydraulic and machine hoists, cranes and crane components, crane weighingscales, suspension weighing scales and loadsuspension devices etc.

Industrial partsSmall electrical parts, hydraulic threaded joints,pneumatic threaded joints, o-rings, sealingtechnology, maileable iron fittings, pipe clamps,in-house manufactured parts, etc.

Personal protection equipmentWork wear, weather protection, safety shoes,safety headgear and breathing masks, skinprotection, gloves, safety accessories, first aidequipment, head, knee and leg protection, heat and fire pro tec tion, PSA etc.

Works equipmentWorkshop equipment, workstations, officeequipment, storage and transport equipment,ladders and scaffolding, environmental pro-tection engineering, heating and cleaning devices, wheels and rollers etc.

Product range

11

C-parts management

Keller & Kalmbach is a pioneer in the field of C-parts logistics and set up the first industrialKanban at Siemens in 1987. Keller & Kalmbachoffers the right solution for any requirement –from eBusiness solutions to automatic dispen-sers to fully automated RFID-based Kanbansolutions for volume production.

Kanban systems – for volume production requirements Keller & Kalmbach offers innovative Kanbanand logistics systems based on RFID and BLE such as turnLOG®, pushLOG®, dropLOG®,weightLOG®, moveLOG® and parkLOG®. With“eLogistics”, Keller & Kalmbach offers an ITplatform for automated merchandise manage-ment, including the option of integrat ing additional suppliers.

KKLand dispensing systems – formaintenanceKKL and the takeLOG® dispensing systems areideal systems for the workshop, assembly andmaintenance needs of industry. The artic lescan be easily removed and reordered by scan-ner or fully automatically, including access con-trols and statistics.

eBusiness – for sporadic requirementseBusiness solutions, such as electronic cata-logs or the online shop with OCI connection,are suitable for the efficient procurement ofunplannable requirements.

1313

Quality management

Keller & Kalmbach places highest value on thequality of its products, processes and services.Keller & Kalmbach’s quality philosophy is evi-dent in its everyday business. Since 1980, a cer - tified qual ity management system has been anintegral part of Keller & Kalmbach's business.Modern quality methods, such as Kaizen,Ishikawa/risk analyses and FMEA are used forsupport. An extensive selection of test equip-ment is available for product verification. Morethan 40 employees are active in quality mana -ge ment, in order to monitor supplier eval uationand auditing, as well as products and proces-ses. Application engineering, consulta tion andproduct range optimization are carried out,incorporating a very high level of quality. As areliable partner, Keller & Kalmbach has alreadybeen a supplier for many years to volume pro-duction in the automobile industry.

Certifications and auditings - DIN EN ISO 9001:2015 - VDA 6.2- DVS EN 15048- EMAS- Bavarian Quality Prize 2001 and 2010- IRIS- A-list supplier to renowned companies such as Audi, AGCO-Fendt, Siemens, Krones, VW, ZF etc.

15

Headquarters:Keller & Kalmbach GmbHSiemensstrasse 1985716 UnterschleissheimGermanyPhone +49 (0)89 83 95-0Fax +49 (0)89 83 95-267info@keller-kalmbach.com

Centre of distribution:Keller &Kalmbach GmbHAn der Autobahn K3 91161 HilpoltsteinGermanyPhone +49 (0)9174 7830-0Fax +49 (0)9174 7830-111info@keller-kalmbach.com

Website:www.keller-kalmbach.com

Onlineshop:www.kk-shop.com

Subsidiaries in China, Italy, Croatia, Romania, Russia, Czech Republic, Hungary and the USA. Cooperation partner in Switzerland: SFS Unimarket.

2/2

019