Keeping The Pool Vacuum Line Cleared Of Objects Vacuuming is an important procedure that helps to remove the debris from the swimming pool

water. Obstructions in the vacuum line may interfere with this process. It is thus necessary to keep

the vacuum line clear of unwanted objects. Following measures can be implemented to keep the

vacuum line clear:

Troubleshooting the Vacuum Line Initially, you can follow some basic steps to troubleshoot the vacuum line. The steps are as

follows:

First, the skimmer baskets need to be checked for debris. Uncover each basket and get rid of

leaves and small wooden sticks if any, then run the vacuum. A basket having too much of

debris will hamper the functionality of the vacuum.

Switch off the motor and open the basket pot. Depending on the design of pool motor, the

location of basket pot varies in different pools. You should refer to the owner’s manual for

figuring out its exact location.

At the end of garden hose, attach a 2-inch bladder bag. Put this bladder bag into the basket

pot. Open the skimmer by turning its valve. Once the skimmer is completely open, turn on

the hose and wait till the bladder bag expands and starts pumping water through the line.

If the bladder bag setup does not work, you can use a drain snake. Insert it into the vacuum

line and run it all along to remove the obstructions.

Recommended Product Along with the vacuum line, pool filter cartridges too are an important part of swimming pool. It

is really necessary to replace filter cartridges regularly, for maintaining the cleanliness and clarity

of pool water. Unicel C-7477 is a high-quality replacement cartridge. Filbur FC-1260, Pleatco

PA75SV and OEM 25200-0175S are the technical specifications of this cartridge. 7 inches wide

and 19 5/8 inches long, this cartridge has 3 inch open holes at the top and bottom. It keeps the

pool water free from dust, algae, and other impurities.

Source: http://blog.poolfilters.biz/replace-online-unicel-c-7477-pool-filter-cartridge/