Kee Rigid Anchor – Bolt Around
2
June 2020 Kee Rigid Anchor – Bolt Around Product Data Sheet KRA-BLT SEPARATING PEOPLE FROM HAZARDS Safe Codes & Standards: n OSHA 1910.66 n OSHA 1910.140 n Cal/OSHA Title 8, Section 3291 n ANSI /IWCA I-14.1 n ANSI Z359.18 n 5000 lb load without permanent deformation Productive n Easy to use on site n Maintenance free n Three attachment options for fall arrest and tie-back applications n Suitable for all roof types Quality n Galvanized finish to ASTM A123 n Insulated interior to prevent thermal bridge & condensation n Dynamically and statically tested and proven
Transcript of Kee Rigid Anchor – Bolt Around
June 2020
Kee Rigid Anchor – Bolt AroundProduct Data Sheet KRA-BLT
S E P A R A T I N G P E O P L E F R O M H A Z A R D S
SafeCodes & Standards:n OSHA 1910.66 n OSHA 1910.140n Cal/OSHA Title 8, Section 3291n ANSI /IWCA I-14.1n ANSI Z359.18n 5000 lb load without permanent deformation
Productiven Easy to use on siten Maintenance freen Three attachment options for fall arrest and tie-back applicationsn Suitable for all roof types
Qualityn Galvanized finish to ASTM A123n Insulated interior to prevent thermal bridge & condensationn Dynamically and statically tested and proven
8” MinimumAbove roof
20” StandardPost Length
(Custom lengths available)
Spun AluminumFlashing Optional
4½” diameter Anchor PostCavity filled with polyurethane insulation
Base & Backing Plates5/8” x 10” x 10”
with 5/8” diameter bolt set
Roof constructionInsulation thickness &
details may vary
USAKee Safety, Inc.100 Stradtman StreetBuffalo, NY 14206
Tel: (716) 896 4949Fax: (716) 896 5696Toll Free: (800) 851 5181
www.keesafety.comEmail: [email protected]
Kee Klamp, Kee Lite, Kee Stainless, KeeGuard, Kee Dome, Kee Hatch, Kee Mark, Kee Access, Kwik Kit, Kee Anchor, Weightanka, Wireanka, KeeLine, Kee Walk and Kee Projects are all registered trademarks of Kee Safety Ltd, Beam Clamp, and Box Bolt are all registered trademarks of Access Technologies Ltd, a subsidiary of Kee Safety International Ltd. While every effort has been made to ensure the accuracy
of the information contained in this brochure, Kee Safety, Inc cannot be held responsible for any errors or omissions. Kee Safety, Inc reserves the right to alter or withdraw products without prior notice. Kee Safety, Inc does not accept responsibility for any loss or damage arising from improper use of its products.
Copyright 2020 Kee Safety, Inc. All Rights Reserved.
CanadaKee Safety, Ltd.40 North Rivermede Road, Units 6 - 7Concord, Ontario L4K 2H3
Tel: (905) 669 1494Fax: (905) 669 4347Toll Free: (877) 505 5003
www.keesafety.ca
Kee Rigid Anchor – Bolt AroundProduct Data Sheet KRA-BLT
Bolts around structures of steel, concrete or wood using connector rods and a backer plate.For concrete deck applications, use through-bolts. Best suited to retrofit - but can be used for new build where welding is not appropriate.
Contact us for applications on moderate to high slope roofs.Use Kee Safety flashings with Kee Safety anchors for best compatibility.Anchors can be designed into the structure of your building by calculation in accordance with ANSI/AISC 360-16. Contact our team for calculations and complete design packages. Made in the USA.
Versatile Anchor Rangen Suspended Platformsn Window Washing Operationsn Equipment Tie-Backn Fall Protectionn Horizontal Lifelines
Multiple Roof Typesn Flat or Low-Slope Roofsn BUR Membrane Systemn Single-Ply Membranen Modified Bitumenn Green Roofsn Metal Roofs: with underlying structures of steel, concrete or wood
3 Diverse Attachment Points
ForgedD-Ring
StainlessSteel U-Bar
Tapped Hole
