KE2 Edge Manager Q.5.57-58-59 March 2019 KE2-EM35 SIDE 1 · Q.5.57-58-59 February 2019 supersedes...
Transcript of KE2 Edge Manager Q.5.57-58-59 March 2019 KE2-EM35 SIDE 1 · Q.5.57-58-59 February 2019 supersedes...
WANLAN
WANLAN
WANLAN
WANLAN
Laptop
Wireless - OR - Hardwire
WANLAN
Laptop, Tablet or Phone
Cable not included in kit.
MAC: E4:95:6E:4B:5B:F9WIFI ESSID: KE2EDGE-4B5BF9WIFI PW: AXPAWRVHMGMT LOGIN: ke2adminMGMT PW: ke2adminhttp://em35 or IP: 192.168.50.1FCC ID: 2AOPP-216345 IC:23545-21634FCC ID:XU8TBW106-107V2
Serial #:18162-118
Label from bottom of KE2-EM35.
KE2-EM35 broadcasts a WiFi signal with the SSID: KE2EDGE-xxxxxxSearch for the SSID, and connect to it.WiFi PW: • • • • • • • •
MAC: E4:95:6E:4B:5B:F9WIFI ESSID: KE2EDGE-4B5BF9WIFI PW: AXPAWRVHMGMT LOGIN: ke2adminMGMT PW: ke2adminhttp://em35 or IP: 192.168.50.1FCC ID: 2AOPP-216345 IC:23545-21634FCC ID:XU8TBW106-107V2
Serial #:18162-118
Label from bottom of KE2-EM35.
KE2-EM35 broadcasts a WiFi signal with the SSID: KE2EDGE-xxxxxxSearch for the SSID, and connect to it.WiFi PW: • • • • • • • •
WANLAN
❶ Attach the antennas
❶ B
❶ A
❸ Power Up ❹ Connect Network Cable
❺ Connect Network Cable to the Network
❺ Connect Wirelessly or via Ethernet Cable.
Q.5.57-58-59 March 2019SIDE 1
© 2019 KE2 Connect Inc.12 Chamber Drive ▪ Washington, MO. 63090 ▪ ke2connect.io ▪ 636.266.4466
KE2 Edge ManagerKE2-EM35
WANLAN
❷ Attach the Bluetooth Adapter
Wireless
Sensor
❻ Power up the sensor(s)Press button until blue blinking light comes on.
⓬ Once the location is validated, apply vel-cro or adhesive strip, and place sensor.
❿ Place the sensor where you think you want it.
FCC:xxxxx-xxxxxIC:xxxxx-xxxxx
KE2 Wireless SensorTracking Chart
12-Digit Sensor ID(alphanumeric) AC233FA044AB
XXXXXXXXXXXX
Example
Last 6 digits uniquely identify a specific sensor
Once your Tracking Chart is filled in, we suggest taking a picture of the list, to serve as a backup copy.
Sensor ID Location
Ex: A0 44 ABTo help you locate the sensor later, write a description of its
physical location. (Example: North wall walk-in cooler)
⓭ Record on the tracking chart.
(Below)
IMPORTANT - To ensure the sensors have the strongest wireless connection possible, please follow the steps in:
Video 125 Best Practices for Deploying a
Wireless Monitoring Solution.
❼ Sensors should automatically display on the Dashboard
FCC:xxxxx-xxxxxIC:xxxxx-xxxxx
AC233FA0190C
XXXXXXXXXXXX
❽ Last 6 digits of the MAC address are unique for each sensor.
Ex.
Use the numbers to find the sensor on the list. Click the link to open the sensor's page.
❾ Clicking the Status light changes it to a timer that measures how quickly the sensor checks in with the EM35.This can help deter-mine the sensors location.
⓫ If timer reads 1 second or less it is ideal. Below 10 seconds is good. 20 seconds or more consider moving or changing the orientation of the sensor.
⓮ Repeat steps ❻ through ⓭ for each additional sensor.
Last 6 digits uniquely identify a specific sensor
Once your Tracking Chart is filled in, we suggest taking a picture of the list, to serve as a backup copy.
FCC:xxxxx-xxxxxIC:xxxxx-xxxxx
KE2 Wireless SensorTracking Chart
12-Digit Sensor ID(alphanumeric) AC233FA044AB
XXXXXXXXXXXX
Example
Sensor ID / MAC Location
Ex: A0 44 AB To help you locate the sensor later, write a description of its physical location. (Example: North wall walk-in cooler)
KE2 Wireless SensorsTracking Chart
Last 6 digits uniquely identify a specific sensor
Once your Tracking Chart is filled in, we suggest taking a picture of the list, to serve as a backup copy.
FCC:xxxxx-xxxxxIC:xxxxx-xxxxx
KE2 Wireless SensorTracking Chart
12-Digit Sensor ID(alphanumeric) AC233FA044AB
XXXXXXXXXXXX
Example
Last 6 digits uniquely identify a specific sensor
Once your Tracking Chart is filled in, we suggest taking a picture of the list, to serve as a backup copy.
FCC:xxxxx-xxxxxIC:xxxxx-xxxxx
KE2 Wireless SensorTracking Chart
12-Digit Sensor ID(alphanumeric) AC233FA044AB
XXXXXXXXXXXX
Example
Setup Dashboard⓯ Launch web browser
⓰ Enter 192.168.50.1 in address bar.
Sensor ID / MAC Location
Features of the Dashboard & Management Console
Con�rming ChangesThe bottom half of the Dialog Boxes/Pop-ups will typically show the options OK, Suppress Dialogs, and Cancel.
Other Dialog Boxes / Pop-upsLocationEnter the description from your Sensor Tracking Chart.
The defaults are:User: ke2adminPassword: ke2admin
Sensor LoginPrior to making changes, you will be prompted for the case-sensitive password.
OK - Con�rm value change
Supress Dialogs - DO NOT CLICK Prevents Dialog Box/Pop-Up from appearing.
Cancel - Revert to previous value
Primary Dialog Boxes / Pop-ups
GraphsShows the tempera-ture & humidity for the time frame de�ned by the user.
Disconnect
Access & Set: Hi Temp Alarm Setpoint
Access & Set: Hi Temp Alarm Delay
Access & Set: Low Temp Alarm Setpoint
Access & Set: Low Temp Alarm Delay
Access & Set: Hi Humidity Alarm Setpoint
Access & Set: Hi Humidity Alarm Delay
Access & Set: Low Humidity Alarm Setpoint
Access & Set: Low Humidity Alarm Delay
Set the minutes after Low Temp Alarm
Setpoint is exceeded, before an alarm is sent.
Set the lowest temperature allowable before triggering the Low Temp Alarm Delay.
Set the minutes communication can be absent to initiate a Tempo-rary Loss of Communication Alert.
Set the minutes communication can be absent to initiate a Perma-nent Loss of Communication Alert.
Set the minimum battery threshold to send out an Alert.
Set the highest temperature allowable before triggering the Hi Temp Alarm Delay.
Set the number of min-utes after Hi Temp Alarm Setpoint is exceeded, before an alarm is sent.
Set the highest humidity allowable before trigger-ing the Hi Humidity Alarm Delay.
Set the minutes after Hi Humidity Alarm Setpoint is exceeded, before an alarm is sent.
Set the lowest humidity allowable before trigger-
ing the Low Humidity Alarm Delay.
Set the minutes after Low Humidity Alarm Setpoint
is exceeded, before an alarm is sent.
offset
offset
Temp - Clicking toggles between ºF & ºC
Sensor Calibration Used to match sensor reading to known temperature or humidity value
Device Loss Low Battery
Q.5.57-58-59 March 2019SIDE 2
KE2 Wireless SensorsAlarm Notification Setup
© KE2 Therm Solutions, Inc . Washington, MO 63090Q.5.57-58-59 February 2019 supersedes Q.5.57-58-59 August 2018 and all prior publications.
KE2 Therm Solutions, Inc . 12 Chamber Drive . Washington, MO 63090636.266.0140 . www.ke2therm.com
Customize your portal
Data logging setup Setup alarm noti�cations
System updatesAccess BACnet services
Management Console Mobile View - Landscape
Management Console Mobile View - Portrait
Activate Device ServicesBlack icon is Active, White icon is Inactive. Tap Icon to change color.
Access KE2- EM35 from Portal (future feature; with valid portal subscription)
Allow KE2 to manage/con�gure EM35 and all devices remotely
System updates
Automatically discover and display ONLY KE2 devices
BLACK icons indicate the service is Active for that device.
Tap to de-activate.
Global Selection - Enable service(s)setting for all devices.
Management Console will display all* of the KE2 devices connected to the Network directly, or through the KE2-EM35s.
*While theoretically unlim-ited, performance speed will vary based on the number of connections / devices.
Tested to 50 devices with-out noticeable loss of speed.
Allows user access to webpages through the WAN interface
WHITE icons indicate the service is Inactive for that device.
Tap to activate.
Display on the Local Dashboard
Published to Cloud/Internet/Remote*
Alarm Notifications are Active*
Data Logging Enabled
BACnet Services Enabled*
* Requires additional configuration when activated. See Management Console Setup.
Access KE2- EM35 from Portal (future feature; with valid portal subscription)
Allow KE2 to manage/con�gure EM35 and all devices remotely
System updates
Automatically discover and display ONLY KE2 devices
BLACK icons indicate the service is Active for that device.
Tap to de-activate.
Global Selection - Enable service(s)setting for all devices.
Management Console will display all* of the KE2 devices connected to the Network directly, or through the KE2-EM35s.
*While theoretically unlim-ited, performance speed will vary based on the number of connections / devices.
Tested to 50 devices with-out noticeable loss of speed.
Allows user access to webpages through the WAN interface
WHITE icons indicate the service is Inactive for that device.
Tap to activate.
Access KE2- EM35 from Portal (future feature; with valid portal subscription)
Allow KE2 to manage/con�gure EM35 and all devices remotely
System updates
Automatically discover and display ONLY KE2 devices
BLACK icons indicate the service is Active for that device.
Tap to de-activate.
Global Selection - Enable service(s)setting for all devices.
Management Console will display all* of the KE2 devices connected to the Network directly, or through the KE2-EM35s.
*While theoretically unlim-ited, performance speed will vary based on the number of connections / devices.
Tested to 50 devices with-out noticeable loss of speed.
Allows user access to webpages through the WAN interface
WHITE icons indicate the service is Inactive for that device.
Tap to activate.
Access KE2- EM35 from Portal (future feature; with valid portal subscription)
Allow KE2 to manage/con�gure EM35 and all devices remotely
System updates
Automatically discover and display ONLY KE2 devices
BLACK icons indicate the service is Active for that device.
Tap to de-activate.
Global Selection - Enable service(s)setting for all devices.
Management Console will display all* of the KE2 devices connected to the Network directly, or through the KE2-EM35s.
*While theoretically unlim-ited, performance speed will vary based on the number of connections / devices.
Tested to 50 devices with-out noticeable loss of speed.
Allows user access to webpages through the WAN interface
WHITE icons indicate the service is Inactive for that device.
Tap to activate.
Access KE2- EM35 from Portal (future feature; with valid portal subscription)
Allow KE2 to manage/con�gure EM35 and all devices remotely
System updates
Automatically discover and display ONLY KE2 devices
BLACK icons indicate the service is Active for that device.
Tap to de-activate.
Global Selection - Enable service(s)setting for all devices.
Management Console will display all* of the KE2 devices connected to the Network directly, or through the KE2-EM35s.
*While theoretically unlim-ited, performance speed will vary based on the number of connections / devices.
Tested to 50 devices with-out noticeable loss of speed.
Allows user access to webpages through the WAN interface
WHITE icons indicate the service is Inactive for that device.
Tap to activate.
Discovered KE2 devices
Enter e-mail or text addresses for noti�cations & preferred “Subject” line (If multiple addresses are entered, use a comma to seperate each address)
Setup or change the Portal Site name and Password
Establish the frequency that data points are logged
Updates & advanced con�gurations
Enable the BACnet Services
Update Firmware button is displayedClicking the button automatically up-dates �rmware to the latest version.
Management Console Setup
Data Logging Enabled
Displays active alarms
Up to 35 devices are automatically displayed on the dashboard
Published to KE2 portal
Alarm Noti�cations NOT Enabled
NOTPublished to
KE2 portal
Download, graph or view CSV �le
Setup and changes are made
Green shaded bar indicates the device is
published to the KE2 portal
KE2-EM35 Management Address & Firmware Version
Alarm Noti�cations Enabled
When log button selected, user prompted for date range.
BACnet ServicesEnabled
NOTE: Services are selected from the
Management Console
From Dashboard Access Management Console Page
Access KE2- EM35 from Portal (future feature; with valid portal subscription)
Allow KE2 to manage/con�gure EM35 and all devices remotely
System updates
Automatically discover and display ONLY KE2 devices
BLACK icons indicate the service is Active for that device.
Tap to de-activate.
Global Selection - Enable service(s)setting for all devices.
Management Console will display all* of the KE2 devices connected to the Network directly, or through the KE2-EM35s.
*While theoretically unlim-ited, performance speed will vary based on the number of connections / devices.
Tested to 50 devices with-out noticeable loss of speed.
Allows user access to webpages through the WAN interface
WHITE icons indicate the service is Inactive for that device.
Tap to activate.
Management Console Page