Kayman Ledtex
-
Upload
gavin-campbell -
Category
Documents
-
view
224 -
download
0
description
Transcript of Kayman Ledtex
1
www.kymanledtex.com
2
Since our launch in 2006, the LED lighting has experienced many significant changes, not just in technological advances but also in product choice and diversity. LED light engines are now producing over 100 lumens per Watt and improve-ments in white light technology and colour rendering mean that LED’s can now be considered for most commercial lighting applications. We have also seen significant reductions in the manufacturing costs of LED technology which means that LED lighting is now a commercially viable solution for many businesses. 2012 was a significant year for Kyman Ledtex with the introduction of the KYMAN® brand and many new additions to our product portfolio such as the KYMAN ‘smart’ range and LED ready fittings. At Ky-man Ledtex, we continue to strive to provide our customers with the latest technology whilst maintaining appropriate levels of stock and a competitive pricing structure.
Project ManagementAt Kyman Ledtex we do a lot more than just supply lighting products. Our goal is to exceed expectations of not just our wholesaler network, but their customers too. We can be involved at any stage of a project and can offer a full ‘turn-key’ service from product demonstrations and site surveys to full project management and installation. We can also provide lighting design plans, energy savings reports and we can also offer advice on funding op-tions. Based on the information you give us, we will work out your current usage, projected usage and return of investment including maintenance savings.
Original Equipment ManufacturingIf you are looking to develop a new product or are simply looking to supply a more reliable product then we can help. We offer a full manufacturing service from simple re-branding and product testing to full research and develop-ment. Minimum order quantities may apply.
3
ContentsLamps & TubesDichroic Replacement.............................................................................................. 6-7Candle & Golf Balls.................................................................................................. 8-9A60 GLS Lamps.................................................................................................... 10-11AR111 Lamps......................................................................................................... 12-13PAR 30 Lamps...................................................................................................... 14-15PAR 38 Lamps....................................................................................................... 16-17T8 SMD LED Tubes.............................................................................................. 18-19T5 SMD LED Tubes............................................................................................. 20-21SB G24 (PL) Replacement Lamps....................................................................... 22-232G11 (PL-L) Replacement Lamps...................................................................... 24-252D LED Lamps.................................................................................................... 26-27Son Replacement Lamps.................................................................................... 28-29
Luminaires & FittingsRDM Downlighters............................................................................................... 32-33Commercial 12W Downlight............................................................................... 34-35Commercial 17W Downlight............................................................................... 36-37Commercial 22W Downlight.............................................................................. 38-39Ceiling Panels.................................................................................................... 40-41Multipurpose Floods........................................................................................... 42-43Heavy Duty Floods............................................................................................... 44-45High Bay – Standard............................................................................................ 46-47High Bay – Super Bright..................................................................................... 48-49Smart 2D Bulkheads........................................................................................... 50-51Smart Modular.................................................................................................... 52-53Smart Rail Batten.............................................................................................. 54-55Under Shelf Lighting......................................................................................... 56-57IP20 LED Batten................................................................................................ 58-59Vapour Proof LED Batten................................................................................... 60-61
Control GearsEMG Maintained LED Emergency Module......................................................... 64-653W Non Maintained Emergency Kit................................................................ 66-67Full Brightness Emergency Module.................................................................. 68-69
www.kymanledtex.com
4
LAMPS & TUBES
5
www.kymanledtex.com
6
KYMAN® unique LED spotlights are as-sembled using top quality multi-core LED’s. They offer high colour rendering (Ra>85) to maximise true colours where colour definition is important. The LED’s are side facing so that the light is projected directly onto the high performance reflector. This in turn enables better beam control, reduced glare and provides a higher optical efficiency resulting in maximum energy savings. Dimmable models can work on most leading and trailing edge dimmers with a possible dimmable range of 1%-100%. KYMAN® LED Spotlights are designed to look similar to the traditional Dichroic Halogen ap-pearance and are aesthetically pleasing.
Features• High CRI (Ra>85) provides high colour definition• Smooth dimming, range from 1% to 100%• Works with most Leading and Trailing edge dimmers• Traditional Dichroic looks• LED lamps suitable for simple (retrofit) replacement of halogen lamps• Temperature operating range: -30°C to +45°C Ambient temperature• Side facing LED’s to project light more evenly and reducing Glare• Low light degradations• Long life time up to 35,000 Hours• Environmentally friendly, low carbon footprint and no mercury
MR16 5W NON DIMMABLE
GU10 5W NON DIMMABLEGU10 5W DIMMABLE
GU10 8W DIMMABLE
7
Features• High CRI (Ra>85) provides high colour definition• Smooth dimming, range from 1% to 100%• Works with most Leading and Trailing edge dimmers• Traditional Dichroic looks• LED lamps suitable for simple (retrofit) replacement of halogen lamps• Temperature operating range: -30°C to +45°C Ambient temperature• Side facing LED’s to project light more evenly and reducing Glare• Low light degradations• Long life time up to 35,000 Hours• Environmentally friendly, low carbon footprint and no mercury
Note:Installation should be carried out by a qualified person
Based on a 5W 3000K WW Based on a 8W 3000K WW
MR16 5W GU10 5W GU10 5W GU10 8W
Technical Specification
Total power consumption: 5W/8W
Working voltage: 240VAC
CRI: Ra>85
Dimming: Most leading & trailing edge dimmers
Working temperature: -30°C~+45°C
Life span: 35,000 Hours
Height Lux
0.5m
1m
1.5m
2m
2200
550
250
140
35°
Height Lux
0.5m
1m
1.5m
2m
3200
800
355
200
35°
49.9
50.5
49.9
55
49.9
21
55
49.9
79
www.kymanledtex.com
8
DIMMABLE
Product Code Colour LumensWattage
CAN3W81R 2700K (WW) 225 lm3W
CAN3W82R 5500K (CW) 250 lm3W
CAN5W81R
CAN5W82R
GLO3W81R
GLO3W82R
GLO5W81R
GLO5W82R
2700K (WW)
5500K (CW)
2700K (WW)
5500K (CW)
2700K (WW)
5500K (CW)
Lamp Type
CANDLE
CANDLE
CANDLE
CANDLE
GLOBE
GLOBE
GLOBE
GLOBE
305 lm5W
340 lm5W
225 lm3W
250 lm3W
305 lm5W
340 lm5W
Base Cap
BC,SBC,ES,SES
BC,SBC,ES,SES
BC,SBC,ES,SES
BC,SBC,ES,SES
BC,SBC,ES,SES
BC,SBC,ES,SES
BC,SBC,ES,SES
BC,SBC,ES,SES
KYMAN® Candle and Golf ball lamps aredesigned to replace existing incandescent lampswith the same lighting and reflecting effects.With aesthetics in mind, these lamps are designedto keep the traditional appearance.
These KYMAN® Candle and Golf ball lamps areassembled using the highest grade componentsto maximise the quality and lifespan of the lamps.For added safety KYMAN® lamps are built withisolated drivers which ensure that any exposedmetallic parts are free from electric current.These lamps will last up to 25 times longer thanthe original incandescent versions and have anextremely low running cost.
OptionsAvailable base caps:
•BC,SBC,ES,SES
Applications•Hotels,Restaurants
•Publichouses,Domestic
Features•Lowpower,Longlife
•Dimmable
Benefits•Reducedenergycosts
•Upto25timeslifespanofincan-
descent
•Morecontrol
CANDLE & GOLF BALL
9
Technical Specification
Power: 3W/5W
Colour temp: 2700K/5500K
Glass colour: Clear
Power factor: >0.7
CRI: Ra 80
Input voltage: 230VAC
Input current: 15mA
Beam angle: 360°
Dimming type: Leading / trailing edge
Working temperature: -25°C~+40°C
Base cap : E14/E27/B15/B22
LED life: 30,000 Hours
E14
120
1
36 0.5
B22
123.
61
35 0.5
E27
127.
161
35 0.5
Globe lamp dimensions available on request
Note:Installation should be carried out by a qualified person.
Based on 3W Warm White model
0.5m
Height Lux
1.0m
1.5m
2.0m
2.5m
62
17
11
8
5
360°
www.kymanledtex.com
10
KYMAN® A60 lamps are designed to replaceexisting incandescent lamps with the same lightingand reflecting effects.
These KYMAN® A60 lamps are assembled usingthe highest grade components to maximise thequality and lifespan of the lamps. For added safetyKYMAN® A60 lamps are built with isolated driverswhich ensure that any exposed metallic parts arefree from electric current. These lamps will last upto 30 times longer than the original incandescentversions and have an extremely low running cost.
Features•Die-castingaluminiumalloyheatsink•Smoothdimming,rangefrom5%to100%•WorkswithmostLeadingandTrailingedgedimmers•Beamangle180°•NoUVorRFinterference•Goodcolourrendering
A60 LEDDIMMABLE
11
Features•Die-castingaluminiumalloyheatsink•Smoothdimming,rangefrom5%to100%•WorkswithmostLeadingandTrailingedgedimmers•Beamangle180°•NoUVorRFinterference•Goodcolourrendering
A60 LED 7W CWNote:Installation should be carried out by a qualified person.
Technical Specification
Total power consumption: 7W
Working voltage: 230VAC
Dimmer Type: Most leading & trailing edge dimmers
CRI: Ra>75
Working temperature: -20°C~+44°C
Protection: IP54
Beam angle: 180°
Life span: 40,000 hours
Based on A60 LED 7W CW
Height Lux
1m
1.5m
2m
2.5m
118
82
30
19
180°
www.kymanledtex.com
12
KYMAN® unique AR111 LED spotlights areassembled using top quality multi-core LED’s.They offer high colour rendering (Ra>88) tomaximise true colours where colour definitionis important. The LED’s are reverse facing whichprojects the light directly onto the highperformance reflector. This in-turn enablesbetter beam control, reduced glare and providesa higher optical efficiency. Dimmable models canwork on most leading and trailing edge dimmers,with a possible dimmable range of 1%-100%.
KYMAN® AR111 LED Spotlights are designedto look similar to the traditional AR111 tungstenfilament appearance and are aesthetically pleasing.For added safety KYMAN® LED lamps are equippedwith isolated drivers which ensure that any exposedmetallic parts are free from electric current.
Options•Availablebasecaps:GU10/G53
•Beamangles:12°/24°/35°
•WW(3000K)CW(5000K)
Applications•Hotels,Salons
•DesignStudios
•Galleries,Museums
•Restaurants,ShoppingMalls
Features•Reversefacingmulti-coreLED
•Highcolourrenderingindex
(Ra>88)
•Dimmable(1-100%)
Benefits•Reducedglare
•Promotesnaturalcolour
•Morecontrol
AR111
Ordering
Product Code Colour Lumens
AR118G101-12 3000K (WW) 500
AR118G102-12 5000K (CW) 550
AR118G101-24
AR118G102-24
AR118G101-35
AR118G102-35
AR118G531-12
AR118G532-12
AR118G531-24
AR118G532-24
AR118G531-35
AR118G531-35
3000K (WW)
5000K (CW)
3000K (WW)
5000K (CW)
3000K (WW)
5000K (CW)
3000K (WW)
5000K (CW)
3000K (WW)
5000K (CW)
Beam Angle
12°
12°
24°
24°
35°
35°
12°
12°
24°
24°
35°
35°
Intensity (cd)
11000
11000
4200
4200
2000
2000
11000
11000
4200
4200
2000
2000
500
550
500
550
500
550
500
550
500
550
Base Cap
GU10
GU10
GU10
GU10
GU10
GU10
G53
G53
G53
G53
G53
G53
DIMMABLE
13
Technical Specification
Rated voltage: 220~240VAC
Working voltage: 100V-240VAC
Surge voltage: 500V
Frequency: 50/60Hz
Lamp wattage: 10W
Lamp current: 63mA
Power factor: >0.7
Dimming system: leading and trailing edge
Operating temperature: -30°C~+40°C
Dimming range: 1%-100%
Beam angle: 12°/24°/35°
Light intensity: (cd) 11000/4200/2000
Colour rendering index: Ra>88
Benefits•Reducedglare
•Promotesnaturalcolour
•Morecontrol
Based on 10W (CW)
0.5m
Height Lux
1.0m
1.5m
2.0m
2.5m
557
1670
793
437
272
35°
Note:Installation should be carried out by a qualified person.
www.kymanledtex.com
14
KYMAN®uniqueLEDPARSERIESspotlightsareassembled using top quality multi-core LED’s.They offer high colour rendering (Ra>88) tomaximise true colours where colour definition isimportant.
The LED’s are reverse facing which projects thelight directly onto the high performance reflector.This in turn enables better beam control, reducedglare and provides a higher optical efficiency,resulting in maximum energy savings.Dimmable models can work on most leading andtrailing edge dimmers, with a possible dimmablerange of 1%-100%.
KYMAN® LED Spotlights are designed to looksimilar to the traditional reflector lamps inappearance.
Features•VeryhighColourRenderingproperties(Ra>88) for when Natural Colours isrequired•Smoothdimming,rangefrom1%to100%•WorkswithmostLeadingandTrailingedgedimmers•Traditionallooks•LEDlampssuitableforsimple(retrofit)replacement of halogen lamps•Temperatureoperatingrange:-30°Cto+45°C Ambient temperature•Lowlightdegradations•Longlifetimeupto40,000Hours•Environmentallyfriendly,lowcarbonfootprint and no mercury
PAR30
DIMMABLE
15
Technical Specification
Total power consumption: 10W/15W
Working voltage: 240VAC
Power factor: Ra>88
Working temperature: -30°C~+45°C
Beam angle: 12°/24°/35°
Dimming: Most leading & trailing edge dimmers
Life span: 40,000 Hours
Features•VeryhighColourRenderingproperties(Ra>88) for when Natural Colours isrequired•Smoothdimming,rangefrom1%to100%•WorkswithmostLeadingandTrailingedgedimmers•Traditionallooks•LEDlampssuitableforsimple(retrofit)replacement of halogen lamps•Temperatureoperatingrange:-30°Cto+45°C Ambient temperature•Lowlightdegradations•Longlifetimeupto40,000Hours•Environmentallyfriendly,lowcarbonfootprint and no mercury
Note:Installation should be carried out by a qualified person
LuxandPolarchartbasedona10WPAR303000KWW35°
Height Lux
0.5m
1m
1.5m
2m
8000
2000
900
500
35°
www.kymanledtex.com
16
KYMAN®uniqueLEDPARSERIESspotlightsareassembled using top quality multi-core LED’s.They offer high colour rendering (Ra>88) tomaximise true colours where colour definition isimportant.
The LED’s are reverse facing which projects thelight directly onto the high performance reflector.This in turn enables better beam control, reducedglare and provides a higher optical efficiency,resulting in maximum energy savings.Dimmable models can work on most leading andtrailing edge dimmers, with a possible dimmablerange of 1%-100%.
KYMAN® LED Spotlights are designed to looksimilar to the traditional Halogen tungsten filamentappearance and are aesthetically pleasing.
Features•VeryhighColourRenderingproperties(Ra>88) for when Natural Colours isrequired•Smoothdimming,rangefrom1%to100%•WorkswithmostLeadingandTrailingedgedimmers•Traditionallooks•LEDlampssuitableforsimple(retrofit)replacement of halogen lamps•Temperatureoperatingrange:-30°Cto+45 °C Ambient temperature•Lowlightdegradations•Longlifetimeupto45,000Hours•Environmentallyfriendly,lowcarbonfootprint and no mercury
PAR38
DIMMABLE
17
Features•VeryhighColourRenderingproperties(Ra>88) for when Natural Colours isrequired•Smoothdimming,rangefrom1%to100%•WorkswithmostLeadingandTrailingedgedimmers•Traditionallooks•LEDlampssuitableforsimple(retrofit)replacement of halogen lamps•Temperatureoperatingrange:-30°Cto+45 °C Ambient temperature•Lowlightdegradations•Longlifetimeupto45,000Hours•Environmentallyfriendly,lowcarbonfootprint and no mercury
Note:Installation should be carried out by a qualified person
LuxandPolarchartbasedona20WPAR383000KWW35°
Height Lux
0.5m
1m
1.5m
2m
14400
3600
1600
900
35°
Technical Specification
Total power consumption: 20W
Working voltage: 240VAC
Power factor: Ra>88
Working temperature: -30°C~+45°C
Beam angle: 12°/24°/35°
Dimming: Most leading & trailing edge dimmers
Life span: 45,000 Hours
www.kymanledtex.com
18
These high spec KYMAN® T8 SMD tubes areproduced to the highest possible build quality.They have a built in (high power factor) isolateddriver maximising tube efficiency with total inrushprotection to safeguard vital componentsfrom over-load, over-heat and power surges.They also have shatter proof polycarbonateopal lens and adjustable end caps as standardto allow for optimal direction of light.
The KYMAN® T8 SMD tubes are configuredusing single ended power and non-conductiveend caps to ensure simple and safe installation.Emergency modules available
T8 SMD TUBES
Product Code Size Colour Lumens Power
T806010L1 588 (2ft) x 26mm 4500K (NW) 855 10W
T806010L2 588 (2ft) x 26mm 5500K (CW) 900 10W
T809012L1
T809012L2
T812018L1
T812018L2
T815023L1
T815023L2
T818028L1
T818028L2
T824036L1
T824036L2
891 (3ft) x 26mm
891 (3ft) x 26mm
1198 (4ft) x 26mm
1198 (4ft) x 26mm
1496 (5ft) x 26mm
1496 (5ft) x 26mm
1764 (6ft) x 26mm
1764 (6ft) x 26mm
2374 (8ft) x 26mm
2374 (8ft) x 26mm
4500K (NW)
5500K (CW)
4500K (NW)
5500K (CW)
4500K (NW)
5500K (CW)
4500K (NW)
5500K (CW)
4500K (NW)
5500K (CW)
1090 12W
1150
1630
1715
2040
2150
2300
2420
3100
3265
12W
18W
18W
23W
23W
28W
28W
36W
36W
Ordering
Options•AvailableinNaturalorCoolWhite
•Emergencymoduleavailable
Applications•Offices
•Corridors&Walkways
•Warehouses&Factories
•Storerooms
•Shoppingcentres
Features•Longlife(upto50,000hrs.)
•Singleendedpower
•Nonflicker/instantstart
•Rotableendcap
•Isolateddrivers
Benefits•Opallensreducesglare
•Reducedenergybills
•Reducedmaintenancecosts
•Quicker/saferinstallation
•Improvedworkingconditions
•SuitableforusewithDaylight
and occupancy sensors
19
Installation Guidelines•Beforeinstallation,maintenanceorlampreplacement, please ensure that mains supply is switched off.•Removeexistingfluorescenttubeandstarter.•Forelectronicballast,youmustre-wirethelampholderstoprovidesingleendedpower(L+N)only.Pleaserefertothewiringdiagram.•ForSwitchstartfittings,bypassingorremovingtheexistingballast is optional. You can retro fit the lamp without any modifi-cation to the fitting, but you MUST take out original STARTER and replace with LED BRIDGE
STARTER•InserttheKymanLedtexSMDtubeintothefitting.•Ensureallscrews/clipsaresecuredandallwiringissafelyprotected before switching on power.
Note:Installation should be carried out by a qualified person.
0.5m
Height Lux
1.0m
1.5m
2.0m
2.5m
1174
446
248
178
91
140°
Technical Specification
Connector: Rotatable G13
Working voltage: 100V-265VAC
Power factor: >0.96
CRI: Ra 80
Protection: IP20
Beam angle: 140°
Working temp: -30°C~+45°C
Polar/Luxchartbasedonanopal5ftT8SMDtube
www.kymanledtex.com
20
Our T5 Lamps are assembled using high grade SMD HB LED’s and the highest quality compo-nents toensure optimal levels of light output combined with efficient heat management.
They are available in a wide range (10W-30W)offering a direct replacement for existing T5fluorescent tubes.
T5 SMD TUBES (EXTERNALDRIVER)
Options•10W/21W/30W
•DaylightWhite(DW)
•NaturalWhite(NW)
Applications
•Refrigeration
•Tasklighting
•Displays
•Corridors
Features•Longlife:50,000hrs
•LowPower
•MercuryFree
Benefits•Reducedmaintenancecosts
•ReducedenergybillsandCo2
•Idealforfoodprocessing
environments
21
T5 SMD TUBES (EXTERNALDRIVER)Wiring Diagram
Before:
Caution: Use the specific matching external power supply
After:100 240VAC Input
Fluorescent
Either pin to be connected Either pin to be connected
Constant currentMax. 36VDC Output
External PowerSupply
0.5m
Height Lux
1.0m
1.5m
2.0m
2.5m
1331
546
287
164
101
120°
Based on 5ft 24W Lamp.
www.kymanledtex.com
22
KYMAN®SBG24(PL)replacementlamps have been specially adapted to fit intoexistingG24(d/q)2&4pinfittings,complete with a rotatable base cap which enable the beam pattern to be adjusted,delivering precise light distribution. In-stalled with the latest superbright LED’s producing higher lumens per watt, they make a good solution for direct replace-ment of CFL lamps. Opal lens coverensure soft and evenly light distributions, limiting glare and keeping the traditional look of a CFL.
KYMAN®SBG24(PL)replacementlamps are equipped with isolated and constant current driver ensuring opti-mum stability and longevity. Compatible emergency inverter available forthese lamps, should you require emer-gency lighting applications.
SBG24(PL)REPLACEMENTLAMP
Options•Availablein8or10Watts
•NaturalWhite(4000K)
•CoolWhite(5500K)
Applications•Corridors
•Shoppingcentres
•Hospitals
•Schools
Features•Corridors
•Shoppingcentres
•Hospitals
•Schools
Benefits•Universal
•Simpleinstallation
•Reducedmaintenancecosts
•Reducedenergybills&Co2
•SuitableforusewithDaylight
and occupancy sensors
23
SBG24(PL)REPLACEMENTLAMP
Height Lux
1.0m
2.0m
166
42
3.0m 20
120°
200
= 99%cd/klmC0 - C180 C90 - C270
100
90º
75º
60º
45º 30º 30º15º 15º0º
105º
120º
135º
90º
75º
60º
45º
105º
120º
135º
150
200
250
300
180º
Installation Guidelines•Disconnectmainssupply•Removestarter•BypassexistingballastandconnectadirectLiveto1pinofthelamp and then connect a Neutral feed to the other pin.•InsertPLlamp•Checkwiringbeforeswitchingonmainssupply
Note:Installation should be carried out by a qualified person.
PolarandLuxchartbasedon8WG24SB082
Lux chart based on 10W G24SB082
Height Lux
1.0m
2.0m
166
51
3.0m 24
Height Lux
1.0m
2.0m
206
120°
21.70 L
W
D
www.kymanledtex.com
24
KYMAN® 2G11 lamps are assembled using the highest grade SMD LED’s and components to ensure reliability and efficient heat management to ensure op-timal levels of light. Integrated constant current LED driver generates less heat and lengthens the life of the lamp.
DesignedtoreplaceconventionalPL-Llamps, the KYMAN® 2G11 will easily out perform its predecessor, offering up to 50,000hrs lamp life, high lumen output, low power consumption and better qual-ity light.
2G11(PL-L)REPLACEMENTLAMP
Options•Availablein8W/12W/18W/22W
•NaturalWhiteorCoolWhite
•Emergencyoptionavailable
Applications•Corridors
•Shoppingcentres•
Hospitals
•Schools
Features•Lifespanupto50,000hrs
•LowPower(8W-22W)
•HighefficiencyIsolateddrivers
Benefits•Reducedmaintenancecosts
•Reducedenergybills&Co2
•SuitableforusewithDaylight
and occupancy sensors
25
2G11(PL-L)REPLACEMENTLAMP
Based on 22W Lamp
Installation Guidelines•Disconnectmainssupply•Removestarter•BypassexistingballastandconnectL/N•Insert2G11lamp•Checkwiringbeforeswitchingonmainssupply
Note:Installation should be carried out by a qualified person.
Technical Specification
2G11 (4-pin) connectors
Working Voltage: 100V-240VAC
Power: 8W/12W/18W/22W
Length: 227mm (8W) 322mm (12W)
Length: 417mm (18W) 547mm (22W)
Protection: IP44
Beam Angle: 120°
Working temp: -20°C~+40°C
0.5m
Height Lux
1.0m
1.5m
2.0m
2.5m
1750
570
263
155
105
160°
Live NeutralLive Neutral
www.kymanledtex.com
26
KYMAN® LED 2D lamps have been designed to operate like a standard fluorescent 2D lamp and will fit into most existing fittings with little to no altera-tions required. Advance driver technology incorporates over-load, power surge and overheat protection which allows these lamps to operate continuously without fear of overheating and will have anaverage lamp life of up-to 50,000 hours.
KYMAN® LED 2D lamps are ideal for hallways, stairways, commercial applica-tions and many more. They are compatible with most types of occupancy sensors and the operating life does not get affected by thecontinuousON/OFFcycleswhenusedin conjunction with sensors. Instant start up, full brightness and no flicker, combined with at least 70% energy saving compared to conventional CFL 2D’s making these lamps ideal for applications where mainte-nance and reliability are critical.
2DREPLACEMENTLAMP
Ordering
Product Code
2D1281-V2
2D1289-V2
2D1282-V2
Colour Lumens
3000K-3500K (WW) 900
4000K-4500K (NW) 950
5000K-5500K (DW) 1000
Options•Warmwhite(WW)
•Naturalwhite(NW)
•Daylightwhite(DW)
•Emergencyoptionavailable
Applications•Corridors
•Walkways
•Stairwells
•Coldstores
•Subways
•Schools
•Hotels
•Hospitals
•Carparks
Features•Lowpower(11W)
•LongLife(upto50,000hours)
•Designedtofitmostexisting2D
bulkheads
•Uniqueconnectorboxdesign
•Highgrade/HighbrightnessDIP
LED’s
Benefits•Reducedenergybills
•Reducedmaintenancecosts
•Furthercostsavingsonhousing
•Compatiblewithmostexistinggeartrays
•Uniformlightoutputwithminimallumen
depreciation
27
2DREPLACEMENTLAMP
Installation Guidelines•Beforeinstallation,maintenanceorlampreplacement,pleaseensurethat mains supply is switched off.•Removelampandstarterthenremoveorbypasstheballast.•FitLED2Dreplacementlamptoexistingfitting/housing.•Ensurelampissecurelyfittedandallsafetycheckshavebeencarriedout•Replacethehousingcover/switchonpower.
Note:Installation should be carried out by a qualified person.
20 0
158. 7
158.
7
7935
4017
200
AC I N
Technical Specification
Frequency: 50Hz/60Hz
Working voltage: 100V-240VAC
Power factor: >0.9
CRI: Ra 80
Beam angle: 120°
Protection: IP44
LED quantity: 210
Base: GR10 ( 4-pin)
Working temperature: -25°C ~ 45°C
Benefits•Reducedenergybills
•Reducedmaintenancecosts
•Furthercostsavingsonhousing
•Compatiblewithmostexistinggeartrays
•Uniformlightoutputwithminimallumen
depreciation0.5m
Height Lux
1.0m
1.5m
2.0m
2.5m
1200
380
180
100
65
120°
www.kymanledtex.com
28
SONV2LAMPKYMAN®SONV2replacementlampsaredesigned to replace traditional Son and metal halide lamps.
They are assembled using high gradeSMD LED’s and components to ensure optimal levels of light output combined with efficient heat management.
These lamps are suitable for a whole range of different applications from exterior bol-lard lamps to SON low-bay fittings.
Options•ESandGESCap
•CoolWhite(CW)
•NaturalWhite(NW)
Applications•Industrial
•Hospitals
•Schools
•SportsHalls
Features•Longlife
•LowPower
•Isolateddrivers
Benefits•Reducedmaintenancecosts
•ReducedenergybillsandCo2
•SuitableforusewithDaylight
and occupancy sensors
29
SONV2LAMP
Technical Specification
Total power consumption: 21W-63W
Light source: 3528 SMD LEDÊs
Working voltage: 100V-240VAC
Power factor: >0.94
CRI: Ra 80
Working temperature: -20°C~+40°C
Protection: IP20
Beam angle: 360°
194mm
���mm
���mm
��mm
1��mm�
94mm
94mm
94mm
21W 32W 42W 63W
www.kymanledtex.com
30
LUMINAIRES & FITTINGS
31
LUMINAIRES & FITTINGS
www.kymanledtex.com
32
The KYMAN® 6” and 8” LED recess mounteddownlights are ideal for the complete replacementoftraditionalPL-CandPL-Tdownlights.Withitsastounding fusion of performance and design, thisrange has achieved excellent performance with over67Lumen/W.
Suitable for a wide range of interior applications, such asoffices, hospitals and communal areas, elegant lighting inreception areas, corridors and hotel rooms and effectivelighting in kitchens, bathrooms and living rooms.
RDM DOWNLIGHTERS
Features•Supportsdimmingwithphasecutting
dimmer (Triac Dimmer).
•Ruggedaluminiumdiecast.
•Availableinroundorsquare.
Benefits•Doesnotcontainmercury.
•Maintenancefreeforlifespanof35,000hours.
•Nocolourdegredationwithpowdercoating.
•Speciallydesignedwith8W,16W,24Wand30Woptions.
33
ø184.8
206.6109.6
Technical Specification
Connector: IEC60320 C8 Socket
Working voltage: 240VAC, 50-60Hz
Power factor: >0.9
CRI: Ra 80
Protection: IP44
Dimming: Leading & Trailing edge
0
42
85
127
169
212
= 99%cd/klmC0 - C180 C90 - C270
90°-90°
0°
0
83
166
248
331
414
= 99%cd/klmC0 - C180 C90 - C270
90°-90°
0°
1m
Height Lux
2m
3m
75
19
39
119°
1m
Height Lux
2m
3m
411
103
46
112°
PolarandLuxchartbasedonDL8RND69
PolarandLuxchartbasedonDL16RND69
RDM DOWNLIGHTERS
www.kymanledtex.com
34
HALO-C™ 12W DOWNLIGHTThe KYMAN® HALO-C™ range of LED Commercial downlights offers a truly superior alternative to traditional compact fluorescent luminaires. Strict quality control procedures ensure that all HALO-C™ Commercial downlights are manufac-tured to the highest possible standards allow-ing for optimal levels of light output combined with efficient heat management and maximum longevity.
For added safety KYMAN® HALO-C™ luminaires are equipped with isolated drivers which ensure that any exposed metallic parts are free from electric current, over-load, power surge and overheat protection.
Features a low power output and delivers up to 50,000 hours lamp life. Install and instantly reduce your energy bills and maintenance costs dramatically. LED lamps also have a lesser heat profile so would be ideal for any retail environ-ment. Flexible and light weight unit can be installed from below or above the ceiling.
Options•Warmwhite(WW)
•Naturalwhite(NW)
•Coolwhite(CW)
•Emergencyoptions
available
Applications•Offices
•Schools
•Hospitals
•Hotels
•Shoppingcentres
Features•Lowpower(12W)
•LongLife(upto50,000hours)
•NoflickerorharmfulUVrays
•Optimalheatdissipation
•HBLED’s(9x1W)
Benefits•Reducedenergybills
•Reducedmaintenancecosts
•Improvedworkingconditions
•Longerlife/slowerlight
degradation
•Highefficiency
35
HALO-C™ 12W DOWNLIGHT
Unit:mm
145.5
170.
8
142
117
Note:Installation should be carried out by a qualified person.
0.5m
Height Lux
1.0m
1.5m
2.0m
2.5m
527
151
70
41
27
80°
Technical Specification
9x1W high powered LED
Total power consumption: 12W
Working voltage: 100V-240VAC
LED working current: DC320Ô20mA
Working temperature: -25°C~+45°C
Protection: IP44
Beam angle: 80°
Power factor: >0.85
Cut-out: 122 2mm-+
www.kymanledtex.com
36
HALO-C™ 17W DOWNLIGHTThe KYMAN® HALO-C™ range of LED Commercialdownlights offers a truly superior alternative totraditional compact fluorescent luminaires.
Strict quality control procedures ensure that allHALO-C™ Commercial downlights are manufac-tured to the highest possible standards allow-ing for optimal levels of light output combined with efficient heat management and maximum longevity.
For added safety KYMAN® HALO-C™ luminaires are equipped with isolated drivers which ensure that any exposed metallic parts are free from electric current, over-load, power surge and overheat protection.
Features a low power output and delivers up to 50,000 hours lamp life. Install and instantly reduce your energy bills and maintenance costs dramatically. LED lamps also have a lesser heat profile so would be ideal for any retail environ-ment. Flexible and light weight unit can be installed from below or above the ceiling.
Options•Warmwhite(WW)
•Naturalwhite(NW)
•Coolwhite(CW)
•Emergencyoptions
available
Applications•Offices
•Schools
•Hospitals
•Hotels
•Shoppingcentres
Features•Lowpower(17W)
•LongLife(upto50,000hours)
•NoflickerorharmfulUVrays
•Optimalheatdissipation
•HBLED’s(15x1W)
Benefits•Reducedenergybills
•Reducedmaintenancecosts
•Improvedworkingconditions
•Longerlife/slowerlightdegradation
•Highefficiency/highbrightness
37
HALO-C™ 17W DOWNLIGHT
Note:Installation should be carried out by a qualified person.
Unit:mm
198
173 138
228
140.5
2
0.5m
Height Lux
1.0m
1.5m
2.0m
2.5m
1825
460
228
125
79
80°
Technical Specification
15x1W high powered LED
Total power consumption: 17W
Working voltage: 100V-240VAC
LED working current: DC320Ô20mA
Working temperature: -25°C~+45°C
Protection: IP44
Beam angle: 80°
Power factor: >0.95
Cut-out: 173 2mm-+
www.kymanledtex.com
38
HALO-C™ 22W DOWNLIGHTThe KYMAN® HALO-C™ range of LED Commercialdownlights offers a truly superior alternative totraditional compact fluorescent luminaires.
Strict quality control procedures ensure that allHALO-C™ Commercial downlights are manufac-tured to the highest possible standards allow-ing for optimal levels of light output combined with efficient heat management and maximum longevity.
For added safety KYMAN® HALO-C™ luminaires are equipped with isolated drivers which ensure that any exposed metallic parts are free from electric current, over-load, power surge and overheat protection.
Features a low power output and delivers up to 50,000 hours lamp life. Install and instantly reduce your energy bills and maintenance costs dramatically. LED lamps also have a lesser heat profile so would be ideal for any retail environ-ment. Flexible and light weight unit can beinstalled from below or above the ceiling.
Options•Warmwhite(WW)
•Naturalwhite(NW)
•Coolwhite(CW)
•Emergencyoptions
available
Applications•Offices
•Schools
•Hospitals
•Hotels
•Shoppingcentres
Features•Lowpower(17W)
•LongLife(upto50,000hours)
•NoflickerorharmfulUVrays
•Optimalheatdissipation
•HBLED’s(20Wx1W)
Benefits•Reducedenergybills
•Reducedmaintenancecosts
•Improvedworkingconditions
•Longerlife/slowerlightdegradation
•Highefficiency/highbrightness
39
HALO-C™ 22W DOWNLIGHT
Note:Installation should be carried out by a qualified person.
Unit:mm
245
222 170
248
174
2
0.5m
Height Lux
1.0m
1.5m
2.0m
2.5m
3180
750
347
192
120
80°
Technical Specification
20x1W high powered LED
Total power consumption: 22W
Working voltage: 100V-240VAC
LED working current: DC320Ô20mA
Working temperature: -25°C~+45°C
Protection: IP44
Beam angle: 80°
Power factor: >0.95
Cut-out: 222 2mm-+
www.kymanledtex.com
40
V2CEILINGPANELSKYMAN® LED CEILING panels are manufactured using the latest in cutting edge LED technology and offer a direct replacement for existing grid based fluorescent luminaires.Our LED panels are ultra-slim and light-weight and equipped with a high quality opal acrylic diffuser. The SMD LED light strips are embed-ded into recessed groves to ensure optimal light distribution.
KYMAN® panels offer maximum efficiency due the high power factor driver, high brightness LED’s and the latest in thermal management technology. Heat generated by the LED’s is managed by a special heat sink which funnels the heat away from the LEDs. This results in an extremely harmonious and uniformed effect that traditional fluorescent lamps cannot achieve.
Options•Availablein3sizes
•AvailableinNaturalWhite(NW)
and Cool White (CW)
•Emergencyoptionavailable
Applications•Offices
•Schools
•Hospitals
•Hotels
Features•Lowpower
•Longlife(upto50,000hours)
•NoflickerorharmfulUVrays
•SimpleInstallation
•Isolateddrivers.Whiteframe
blends aesthetically with ceiling
Benefits•Reducedenergybills
•Reducedmaintenancecosts
•Improvedworkingconditions
•Reduceddowntime&maintenancecosts
•SuitableforusewithDaylighta
41
V2CEILINGPANELS
Note:Installation should be carried out by a qualified person.
Basedona600x600mmCWpanelPAN663902-V2
Installation Guidelines•Beforeinstallationormaintenancepleaseensurethatmainssupply is switched off.•Disconnect&removeexistingfixture.•LocateL+N+EmainssupplyandconnecttoexternalLEDdriver.•ConnectdrivertoKymanLedtexLEDpanel.•Checkallwiringbeforeswitchingonpower.
0.5m
Height Lux
1.0m
1.5m
2.0m
2.5m
3540
1291
617
340
214
160°
www.kymanledtex.com
42
MULTI-PURPOSEFLOODSKYMAN® multi-purpose floods represent thenext generation in industrial lighting. They arebuilt using high grade multi-core LED chipscombined with a hi-intensity, prismatic glasscover which reduces glare but offers a crisp,uniformed light output.
KYMAN® LED flood lights can offer up to70%energyreductioncomparedtoHPsodium or mercury lamps and up to 80%compared to incandescent. For added safety,KYMAN® floodlights are equipped withisolateddriversandIP65protectionratingasstandard.
Options•10W/30W/50W/80W
•DaylightWhite(DW)
Applications•Securitylighting
•Loadingbays
•Carparks
Features•HighIntensityprismaticglass
•Adjustablebracket
•IP65Rating
Benefits•Highbrightness/lowluminousdecay
•Rated50,000hours
•Reducedmaintenancecosts
43
MULTI-PURPOSEFLOODS
Note:Installation should be carried out by a qualified person.
Basedona50WDWFLD50152-MPmodel
1.0m
Height Lux
2.0m
3.0m
4.0m
5.0m
1420
467
233
142
100
120°
172mm
80mm
20m
m
150mm40mm 40mm
50mm
290° Transition
FLD10152 - MP
183m
m
200m
m
08mm 06mm
250mm
120mm
30m
m
220mm50mm 50mm
75mm
255° Transition
295m
m
320m
m
015mm011mm
330mm
160mm
30m
m
300mm60mm6 0mm
95mm
270° Transition
365m
m
395m
m
011mm 015mm
165mm
50m
m
355mm
385mm
60mm40mm
011mm 015mm
60mm 40mm
115mm
260° Transition
420m
m
470m
m
FLD30152 - MP
FLD50152 - MP FLD80152 - MP
Technical Specification
Working voltage: 100V-240VAC
LED type: SMD
CRI: Ra>80
Working temperature: -30°C~+55°C
Total power consumption 39W/75W
Protection: IP54
Power factor: >0.94
Beam angle: 160°
Lumen output: 3975lm/6100lm
Colour temperature: 4000K & 5500K
www.kymanledtex.com
44
HEAVYDUTYFLOODLIGHTSKYMAN® Heavy duty flood lights are highperformance luminaires that use premium grademulti-core LED’s as the light source for optimumlight output with minimal loss over time.The main body is made from high quality die-castaluminium for excellent durability and robust-ness,siliconesealedtoensurewatertightIP65rated protection and special reflector technology are used for even greater lighting efficiency.KYMAN® high powered multi-core light engineand cutting edge driver gives an expected lamp life of up to 50,000 hours ensuring virtuallymaintenance free operation.
For added safety KYMAN® flood lights areequipped with isolated drivers which ensure thatany exposed metallic parts are free from electriccurrent, over-load, power surge and overheatprotection and can work in temperatures rangingfrom of -30°C to +55°C.
Options•88W/110W/156W
•DaylightWhite(CW)
•NaturalWhite(NW)
Applications•Industrial
•Carparks
•Securitylighting
•Coldstores
Features•Doubleemittermulti-coreLED
•HighefficiencyLEDdriver
•Highintensitytoughenedglasscover
•Highefficiencyreflector
Benefits•HighBrightness/Lowluminousdecay
•Longlife/reducedmaintenancecosts
•Durability
•SuitableforusewithDaylightand
occupancy sensors
45
HEAVYDUTYFLOODLIGHTS
Note:Installation should be carried out by a qualified person.
Based on a 156W CW FLD140132-HD model
2m
Height Lux
4m
6m
8m
10m
759
275
140
87
58
120°
Technical Specification
Total power consumption: 88W/110W/156W
Working voltage: 100V-240VAC
Power factor: >0.9
NET weight: 11.0 KG
CRI: Ra 80
Working temperature: -30°C~+55°C
Protection: IP65
Beam angle: 120°
Life span: up to 50,000 hours
www.kymanledtex.com
46
HIGHBAYThe KYMAN® High bay & low bay range repre-sents the next generation of industrial lighting. Assembled with high grade Bridgelux multi-core LED’s toensure optimal light output combined with minimal degradation. High efficiency iso-lated drivers allow the KYMAN® High bay to be used in temperatures between -30°C to +45°C.
Designed specifically to replace conventionalindustrial lighting with high ceilings, the KY-MAN® High bay is easy to install and will deliver high brightness output, low power consumption and up to 50,000 hours lamp life, dramatically reducing your energy bills and maintenance costs. For added safety KYMAN® luminaires are equipped with overheat, overload and power surge protection.
Options•CoolWhite(CW)
•60°/120°BeamAngle
Applications•Warehouses
•Factories
•Sportshall/arena
•Coldstores
Features•Lowpowerconsumption
•Single100Wmulti-coreLED
•HighefficiencyIsolateddrivers
Benefits•Upto75%energysavings
•HighBrightness/Lowluminousdecay
•Longlife/reducedmaintenancecosts
•SuitableforusewithDaylightand
occupancy sensors, low glare
47
HIGHBAY
Note:Installation should be carried out by a qualified person.
520
179N
280
260
Unit:mm
5m
Height Lux
6m
7m
8m
9m
252
188
145
115
93.6
10m 75.3
120°
Technical Specification
Total power consumption: 110W
Working voltage: 100V-240VAC
Power factor: >0.98
CRI: Ra 80
Protection: IP65
Beam angle: 120°
Life span: Up to 50,000 hours
Colour temperature: Daylight white (5500K)
NET weight: 7KG
www.kymanledtex.com
48
HIGH BAY SBThe KYMAN® HIGH BAY SB range representsthe next generation of industrial lighting.Assembled with high grade Bridgelux multi-coreLED’s to ensure optimal light output combinedwith minimal degradation. State of the art highefficiency isolated drivers, using top qualityAmerican and Japanese components that allowthe KYMAN® HIGH BAY SB range to be usedin temperatures between -32°C to +55°C.
Built with reliability and longevity in-mind, which makes them perfect to replace conven-tional industrial lighting with high ceilings. They are easy to install and will deliver high bright-ness output, low power consumption and up to 50,000 hours lamp life, dramatically reducing your energy bills and maintenance costs.
For added safety KYMAN® luminaires are equipped with Thermo-shutdown, overload and power surge protection.
Options•90°/120°BeamAngle
Applications•Warehouses
•Factories
•Sportshall/arena
•Coldstores
Features•Lowpowerconsumption
•SuperBrightmulti-coreLED
•HighefficiencyIsolateddrivers
Benefits•Upto75%energysavings
•HighBrightness/Lowluminousdecay
•Longlife/reducedmaintenancecosts
•SuitableforusewithDaylightand
occupancy sensors.
49
HIGH BAY SB
Technical Specification
Total power consumption: 120W/150W
Working voltage: 100V-240VAC
Power factor: >0.96
CRI: Ra 80
Protection: IP54
Beam angle: 90°/120°
Life span: Up to 50,000 hours
Colour temperature: Daylight white (5500K)
NET weight: 8.5KG (120W)/11KG (150W)
Working temp: -32°C to +55°CBased on 120W CW 90 degree beam Based on 150W CW 120 degree beam
120W High Bay 150W High Bay
7m
Height Lux
8m
9m
10m
11m
174
132
104
84
69
90° 9m
Height Lux
10m
11m
12m
13m
123
103
89
73
62
120°
www.kymanledtex.com
50
SMART 2D LED BULKHEADSKYMAN® Smart 2D LED Bulkheads are designed specifically for applications where occupancy is irregular or intermittent.Withanoptionforbuilt-inmicrowave/daylightsensorsanddim-downcapabilitytheselampswill maximise energy savings without having to rely on the human touch to switch them on and off.
Available in 13W or 22W and in emergency version, these state of the art lamps will dim down to 20% when idle and variables such as distance, time and daylight sensitivity can be adjusted to suit the application.
Options•Microwavesensing
•Emergencybackup
•IP54orIP65
Applications•Officeroomsandcomplexes
•Hotels
•Publicbuildings
•Educationalfacilitiesandconferencerooms
•Stairwellsandcorridors
•Washroomsandbathrooms
•Factorysitesandoutdoorfacilities
•Datacentres
Features•Lowpowerconsumption
•SuperBrightmulti-coreLED
•HighefficiencyIsolateddrivers
Benefits•Upto75%energysavings
•HighBrightness/Lowluminousdecay
•Longlife/reducedmaintenancecosts
•SuitableforusewithDaylightand
occupancy sensors.
79
283
274
2DL65R129
100
325
2DL54R12998
315
2DL65R209
99320
320
2DL65S209
51
Benefits•Upto75%energysavings
•HighBrightness/Lowluminousdecay
•Longlife/reducedmaintenancecosts
•SuitableforusewithDaylightand
occupancy sensors.
Ordering
Product Code Power Microwave Sensor with auto dim down to 20%
Emergency backup Colour Cover Lumen Shape IP Rating Dimension (mm)
2DL54R129 12W 4000K Opal 1150 Round IP54 Ø330x110
2DL54R129-M
2DL54R129-E
2DL54R129-ME
13W
14W
15W
•
•
•
•
4000K Opal
4000K Opal
4000K Opal
1150
1150
1150
Round
Round
Round
IP54
IP54
IP54
Ø330x110
Ø330x110
Ø330x110
2DL65R129 12W 4000K Prismatic 1250 Round IP65 Ø280x110
2DL65R129-M
2DL65R129-E
2DL65R129-ME
13W
14W
15W
•
•
•
•
4000K Prismatic
4000K Prismatic
4000K Prismatic
1250
1250
1250
Round
Round
Round
IP65
IP65
IP65
Ø280x110
Ø280x110
Ø280x110
2DL65�209 20W 4000K Prismatic 1800 ��uar� IP65 315x315x95
2DL65�209-M
2DL65�209-E
2DL65�209-ME
22W
23W
25W
•
•
•
•
4000K Prismatic
4000K Prismatic
4000K Prismatic
1800
1800
1800
��uar�
��uar�
��uar�
IP65
IP65
IP65
315x315x95
315x315x95
315x315x95
2DL65R209 20W 4000K Prismatic 1800 Round IP65 Ø315x99
2DL65R209-M
2DL65R209-E
2DL65R209-ME
22W
23W
25W
•
•
•
•
4000K Prismatic
4000K Prismatic
4000K Prismatic
1800
1800
1800
Round
Round
Round
IP65
IP65
IP65
Ø315x99
Ø315x99
Ø315x99
www.kymanledtex.com
52
SMART MODULAR
Options•Availablewithsuspendedor
surface mount fixings
•CCTNaturalWhite(4000K)or
Cool White (5500K)
Applications•Officeroomsandcomplexes
•Hotels
•Publicbuildings
•Educationalfacilitiesandconferencerooms
•Stairwellsandcorridors
•Washroomsandbathrooms
•Carparks
Features•Lowpowerconsumption
•SuperBrightmulti-coreLED
•HighefficiencyIsolateddrivers
KYMAN® ‘Smart’ modular luminaires are especially designed forapplications with irregular or intermittent occupancy. With buil-tinPIRmotionsensorsandinfra-redtransmitters,thisstateofthe art lighting system has been designed to maximise energysavings without having to rely on the human touch to switchthem on and off.
These lights can also remotely communicate witheach other and illuminate whole rows or sequencesif required and will dim down to 10% when idle.
53
Based on 46W Lamp
320
62
104
100.3
148.01200 1
0.5m
Height Lux
1.0m
1.5m
2.0m
2.5m
1750
570
263
155
105
160°
Technical Specification
Total power consumption: 46W
Idle mode power consumption: 4W
Working voltage: 100-240VAC
Beam angle: 160 degrees
Idle dim mode: 10% brightness
Infra-red range : <3 Metres
Protection: IP54
PIR Detection angle: >90 degrees
Working temperature: -20°C~+50°C
Life span: Up to 50,000 Hours
www.kymanledtex.com
54
SMART RAIL BATTEN
Features•PR12powdercoatingpreventscolourdegredation.
•Retractablepowerconnector.
•Abletojoinmultiplefixtureswithoutadditionalwiring.
•Batterybackupandmotionsensoroptions.
Benefits•Lowpowerconsumption
•SuperBrightmulti-coreLED
•HighefficiencyIsolateddrivers
These Surface Mounted Lighting fixturesare perfect replacements for 2ft and 4ft T8fluorescent fixtures.
This series comes with optional emergencybackup power which ensures a minimum of 3 hours operation during a power failure. Dual-motion sensors provide two-way occupancy detection and can be manually programmed to dim down between 10%-30%
An Ideal solution for stairwells and corridors that require emergency lighting.
55
IP65 STANDARD Surface mounted light
IP54 Surface mounted light
PIR & Emergency Surface mounted light
Technical Specification
Working voltage: 240VAC
Power factor: >0.9
CRI: >Ra 80
Working temp: -20°C~40°C
Sensor: PIR
Detection zone: 360°/8m Diameter (Mounted at 3m)
Detection angle: 140°
ON-time: 1 minute
Battery type: Hi-temp Nickel Metal Hydride
Battery capacity: 4.8V/2200mAh
Charge time: <12 hours
CFIX6012W9-IP65CFIX6012W2-IP65CFIX12024W9-IP65CFIX12024W2-IP65
CFIX6012W9-EMGCFIX6012W2-EMGCFIX12024W9-IP54CFIX12024W2-IP54
CFIX6012W9-PIRCFIX6012W2-PIRCFIX12024W9-EMGPIRCFIX6012W2-EMGPIRCFIX12024W9-PIRCFIX12024W2-PIRCFIX12024W9-EMGPIRCFIX12024W2-EMGPIR
www.kymanledtex.com
56
UNDER SHELF LIGHTING
Options•3colourtemperaturestomeet
different needs, Warm White,
Cool White and Daylight.
Features•Retractablepowerconnector
•Abletojoinmultiplefixtures
without additional wiring.
Benefits•Savesupto60%inenergyconsumptioncompared
to fluorescent tubes.
•Doesnotcontainmercuryand100%recyclable.
•Maintenancefreeforlifespanof35,000hours.
•Flickerfree.
This compact low profile LED under shelf batten offers an ideal lighting solution for many commercial and domestic applications.
Each unit can be operated individually or as a group ofupto8unitsatatime.ItsCompactsizemakesitanidealsolutionforretaillighting,kitchen/undercabinet lighting or task lighting.
57
PolarchartbasedonUSL305W9
PolarchartbasedonUSL3013W9
0
71
141
212
282
353
= 99%cd/klmC0 - C180 C90 - C270
90°-90°
0°
0
15
30
45
61
76
= 99%cd/klmC0 - C180 C90 - C270
90°-90°
0°
Technical Specification
Connector: IEC60320 C8 Socket
Working voltage: 240VAC
Power factor: >0.9
CRI: Ra 70
Protection: IP20
Working temp: -20°C~40°C
1m
Height Lux
2m
3m
75
19
39
120°
1m
Height Lux
2m
3m
352
88
39
120°
www.kymanledtex.com
58
LEDIP20BATTEN
Specifications•CertificatedingressprotectionIP20
•Manufacturedfrommildsteel
•ResilientWhitefinish
•Polycarbonatelampholders
•PrismaticdiffuserextrudedfromUVpolystyrene
Applications•Offices
•Workshops
•Schools
•Corridors
•Receptions
A complete energy efficient solution:TheKYMAN®LEDIP20battensareLEDready-madeluminaires which can be ordered with or withoutdiffuser, or as a complete kit with KYMAN® LEDtubes and emergency pack. With minimal capital outlay, these combo kits offer an economical energy efficient solution for many commercial applications including offices, schools, corridors and waiting rooms etc.
59
Based on a twin 5ft 46W CW batten with diffuser
H93W59 L
Single batten
H91
W105 L
Twin batten
0.5m
Height Lux
1m
1.5m
2m
2.5m
3042
1050
509
301
185
180°
www.kymanledtex.com
60
VAPOURPROOFLEDBATTEN
Specifications •CertifiedingressprotectionIP65.
•Polycarbonateinjectionmouldeddiffusers.
•Cableentries,withgrommetsatbothends,and
further conduit entries on rear of housing.
•Luminairehousingmadecorrosion,moistureand
acid resisting glass fibre reinforced polyester.
Light Grey finish (RAL 7035). Flame resistant with
continuous non-aging gasket.
•Whitepowdercoatedmetalgeartrayfixedtothe
body by flexible gear tray suspension clips.
Applications•Coldstores
•Warehousing
•Manufacturingplants
•Foodpreparationareas
•Undercanopylighting
•Carparks
•Retailsuperstores
•Corridors
A complete energy efficient solution, KYMAN® LED battens are LED ready-made luminaires which can beordered as an empty shell, or with the LED tubes installed (Full kit).
RobustpolycarbonateconstructiontosuitwetorhumidenvironmentsandcertifiedtoIP65(ingressprotection) for permanent and arduous industrial & commercial applications. Heavy duty, long service lifeluminaires for mounting directly onto walls and ceilings.
61
Based on a twin 5ft 46W CW Batten
90
95 A = Fixing centresC = Hangar positions
116
99
LAC
0.5m
Height Lux
1.0m
1.5m
2.0m
2.5m
3100
1077
521
307
190
140°
www.kymanledtex.com
62
CONTROL GEARS
63
www.kymanledtex.com
64
EMG4 LED EMERGENCY LIGHTING UNIT
KYMAN® EMG4 emergency modules are primarily used to provide emergency lighting for most self-ballast KYMAN® LED lamps, with a maximum load of 80W. Installed as a maintained unit, theKYMAN® EMG4 emergency modules will provide power to KYMAN® lamps at 100% brightness. Should the mains power fail, the EMG4 module will switch to battery mode and dim down the lamp maintaining adequate emergency light levels for a duration of at least 3 hours.
The Emergency modules consist of a battery pack, an integrated emergency power module, charge indicator LED and a test switch. Built into the system is a discharge protection circuit, over current, short circuit and battery low voltage protection.
Pleasecheckforcompatibilitybeforeordering.
65
EMG4 LED EMERGENCY LIGHTING UNIT
Installation GuidelinesKYMAN® EMG4 emergency module in maintained mode is controlledbytheSWITCHEDLIVEinputwhichmaybeswitchedONandOFFatwill to illuminate the lamp at full nominal power. Upon mains failure thelampwillilluminateirrespectiveofwhethertheSWITCHLIVEinputis ON or OFF. This unit requires a permanent supply in maintainedmode.Fornon-maintainedmode,pleaseconnectSWITCHLIVEtoPERMANENTLIVE.
•EMG4emergencymoduleshouldnotbemountednearanyheatsource or where the ambient temperature normally exceeds 25 °C.
•EnergisethePERMANENTLIVEtomainssupplyandcheckiftheGREEN status indicator illuminates, and check for the mains healthoperation of the lamps.
•AllowEMG4emergencymodulestochargeforatleast1hourbeforebrieflytestingtheemergencymode.Pleaseallowafurther72hourscharge before considering the unit to be fully operational to specification.
Warning:PleasemakesurebatteryterminalisconnectedcorrectlyfollowingthewiringcolourcodeandthePositive(+)andNegative(-)indicatorsonthe module.
Technical Specification
Working voltage: 100VAC ~ 240VAC
Working temperature: -20°C~+55°C
Frequency: 50Hz/60Hz
MAX load: 80W
MAX input current: 1.5A
Charging method: Trickle charge
Battery: 7.2V 2.5Ah
39.2
28. 6
188. 8
243. 0
28.6
12.0
EMG4EMERGENCY MODULE
NEUTRAL
LIVE
AC
IN
OUTPUTTO
LED LOAD
7.2 v BATTERY
TEST SWITCH
STATUSINDICATOR
SWITCH LIVE
www.kymanledtex.com
66
3W EMERGENCY KIT (Non Maintained)
These 3W LED Emergency kit is a completeand easy solution for LED mains emergencyapplications. Designed as a standalone unit,they provide emergency lighting in the event ofpower failure. Includes a 3W recess downlightto enable flush mounting into the ceiling.
These Emergency kits consist of a battery pack,an integrated emergency power module and the3W LED head with the charge indicator builtinto the LED Head. Built into the system is adischargeprotectioncircuitforusewith4.8VNi-Cd (high temp) battery pack
INPUT 220-240VAC 50/60 Hz
LIVENEUTRAL
3W LED HEAD
EMERGENCY BALLAST
BATTER
Y
66mm CUT REQUIRED
86mm
29mm High
LED DOWNLIGHT DIMENSIONS
67
3W EMERGENCY KIT (Non Maintained)Installation GuidelinesThese emergency kits are designed to operate in non-maintained mode only. Upon mains failure the 3W LED lamp will illuminate for a minimum of 3 hours. This unit requires a permanent mains supply.
•Theseemergencykitsshouldnotbemountednearanyheat source or where the ambient temperature normally exceeds 25 °C.
•ConnectBluewiretoNeutralandBrownwiretoPerma-nentLIVE.
•EnergisethePERMANENTLIVEtomainssupplyandcheck if the GREEN status indicator illuminates.
•Allowtheseemergencykitstochargeforatleast1hourbeforebrieflytestingtheemergencymode.Pleaseallowafurther 24 hours charge before considering the unit to be fully operational tospecification.
CEILING
1
66mm
CEILING
2
CEILING
3
CEILING
4
5
CEILING
CEILING INSTALLATIONS
0.5m
Height Lux
1.0m
1.5m
2.0m
2.5m
38
35
15
10
6.5
120°
www.kymanledtex.com
68
15/25WEMERGENCY MODULES (Maintained)
These modules are primarily used to provide emergency lighting for self-ballast lamps with amaximum load of 15W or 25W. Installed as a maintained unit, these emergency modules willpower a lamp of 25W and under at full brightness for duration of at least 3 hours should the main power fail. May also be used as a non-maintained unit.
The Emergency modules consist of a battery pack, an integrated emergency power module, charge indicator LED and a test switch. Built into the system is a discharge protection circuit for usewith12VNi-Cd(hightemp)batterypack.
Options•15WMaximumLoad•25WMaximumLoad
69
Installation GuidelinesThese emergency module in maintained mode is controlledbytheSWITCHEDLIVEinputwhichmaybeswitched ON and OFF at will to illuminate the lamp at full nominal power. Upon mains failure the lamp willilluminate (powered by the battery at full brightness) irrespectiveofwhethertheSWITCHLIVEinputisONorOFF. This unit requires a permanent supply in maintained mode. For nonmaintained mode, please connect SWITCH LIVEtoPERMANENTLIVE.
•Thesemoduleshouldnotbemountednearanyheatsource or wherethe ambient temperature normally exceeds 25 °C.
•EnergisethePERMANENTLIVEtomainssupplyandcheck if the GREEN status indicator illuminates, and check for the mains health operation of the lamps.
•Allowtheseemergencymoduletochargeforatleast1hourbeforebrieflytestingtheemergencymode.Pleaseallow a further 72 hours charge before considering the unit to be fully operational to specification.
Warning:PleasemakesurebatteryterminalisconnectedcorrectlyfollowingthewiringcolourcodeandthePositive(+)&Negative (-) indicators on themodule.
Test Switch
Switch Live
Live Neutral Earth
10 X D 1.2V Cell High Temp Ni-Cd Battery 12V BAT
220V LED TubeEmergency Module
LED LOAD 29mm
41mm
208mm
166mm
217mm
70mm
39mm
316mm
12V Battery
Technical Specification
Duration: 3hours
Recharge period: 72hours
Mains input: 100 - 240 Volts
Battery input: 12VDC
Mains current: 0.7A
Charge current: 250mA
Charging method: Trickle charge
Discharge current: 1.6A
THD (Total Harmonic Distortion): <15%
Charge indicator: Green LED
Changeover voltage: 17.5V
Emergency switch time: <1 second
Environmental Policy
At Kyman Ledtex we believe that a sustainable business is dependent on economic vitality, social equity and a healthy natural environment. We do not see these goals as mutually exclusive, but inextricably linked. As market leaders we are committed to developing sustainable business practices that meet the needs of the present without compromising the welfare of future generations. We pledge to develop strat-egies that enable us to move towards sustainability whilst enhancing the value offered to our customers.
Every project, operation or activity will, as part of its management routines, consider its impact on the environment and communities. These management routines must be set up to be cost effective and sustainable.
Kyman Ledtex’s activities positively impact on the environment and the community through it’s:
• constrictive supply chains’ and excellent employment conditions,
• significantly limiting direct and indirect use of non-renewable carbon fuels in its buildings and for freight transport via road and air,
• policy of not using scarce/non-renewable raw materials in the supply chains of the items it purchases,
• strongly encourage our supply chain against the use of harmful materials or high energy consuming processes in the production of the items,
• disposal of waste products in compliance with environmental guidelines,
• relationships with local communities where activities take place,
• welfare of staff, visitors, volunteers, neighbours and other stakeholders.
Kyman Ledtex will follow the principles of Reduce, Reuse, Repair, Recycle in managing its environmental impact. Using the 4Rs will not only minimise environmental impacts, it also makes sound economic sense.
Kyman Ledtex will comply with all relevant legislations.
ECA Compliance :
‘Enhanced Capital Allowances (ECAs) are a straightforward way for a business to improve its cash flow through accelerated tax relief. The ECA scheme provides businesses with 100% first year tax relief on their qualifying capital expenditure. The scheme allows businesses to ‘offset’ the whole cost of the equipment against taxable profits within the first year of purchase. This can provide a cash flow boost and an incentive to invest in energy-saving equipment which normally carries a price premium when compared to less efficient alternatives. So if your business pays corporation tax at 28%, every £1,000 spent on qualifying equipment would reduce its tax bill in the year of purchase by £280.
The ECA scheme for energy-saving technologies encourages businesses to invest in energy-saving products specified on the Energy Technology List (ETL) which is managed by the Carbon Trust on behalf of Government. The ETL list does not list individual LED products due to the sheer number of products available on the market. Instead, they have outlined a set of criteria with which LED lighting must comply in order to qualify for ECA.
Despite what some suppliers are claiming, LED ‘retrofit’ lamps and tubes are NOT eligible for ECA support unless the existing luminaire is also replaced. This is because replacement lamps do not qualify as ‘capital expenditure’.
The majority of KYMAN® complete fittings and luminaires have been fully tested and certified for compliance with the ECA criteria. If you have purchased our products and would like further information, please contact us.
Disclaimer:
‘In line with our policy of continuous research and development, Kyman Ledtex Ltd reserves the right to change specifications without prior notice. The information contained in this publication is representative only of general models and does not form part of a contract. All specifications are believed to be correct at time of going to press and are subject to change without notice.
www.kymanledtex.com
72
Head Office:Unit 4 The Crosshouse Centre
Crosshouse RoadSouthampton
SO14 5GZUnited Kingdom
Tel +44 (0) 2380 632 059Fax +44 (0) 8715 227 819
Enquiries: [email protected]: [email protected]